diff options
Diffstat (limited to 'drivers/net/can/Kconfig')
| -rw-r--r-- | drivers/net/can/Kconfig | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index 080574b0fff..5dec456fd4a 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -12,6 +12,27 @@ config CAN_VCAN This driver can also be built as a module. If so, the module will be called vcan. +config CAN_SLCAN + tristate "Serial / USB serial CAN Adaptors (slcan)" + depends on CAN + default N + ---help--- + CAN driver for several 'low cost' CAN interfaces that are attached + via serial lines or via USB-to-serial adapters using the LAWICEL + ASCII protocol. The driver implements the tty linediscipline N_SLCAN. + + As only the sending and receiving of CAN frames is implemented, this + driver should work with the (serial/USB) CAN hardware from: + www.canusb.com / www.can232.com / www.mictronics.de / www.canhack.de + + Userspace tools to attach the SLCAN line discipline (slcan_attach, + slcand) can be found in the can-utils at the SocketCAN SVN, see + http://developer.berlios.de/projects/socketcan for details. + + The slcan driver supports up to 10 CAN netdevices by default which + can be changed by the 'maxdev=xx' module option. This driver can + also be built as a module. If so, the module will be called slcan. + config CAN_DEV tristate "Platform CAN drivers with Netlink support" depends on CAN @@ -96,6 +117,8 @@ source "drivers/net/can/sja1000/Kconfig" source "drivers/net/can/usb/Kconfig" +source "drivers/net/can/softing/Kconfig" + config CAN_DEBUG_DEVICES bool "CAN devices debugging messages" depends on CAN |