summaryrefslogtreecommitdiffstats
path: root/drivers/net/chelsio/espi.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/chelsio/espi.c')
-rw-r--r--drivers/net/chelsio/espi.c205
1 files changed, 120 insertions, 85 deletions
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c
index 542e5e065c6..4192f0f5b3e 100644
--- a/drivers/net/chelsio/espi.c
+++ b/drivers/net/chelsio/espi.c
@@ -81,46 +81,36 @@ static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
return busy;
}
-/* 1. Deassert rx_reset_core. */
-/* 2. Program TRICN_CNFG registers. */
-/* 3. Deassert rx_reset_link */
static int tricn_init(adapter_t *adapter)
{
- int i = 0;
- int stat = 0;
- int timeout = 0;
- int is_ready = 0;
+ int i, sme = 1;
- /* 1 */
- timeout=1000;
- do {
- stat = readl(adapter->regs + A_ESPI_RX_RESET);
- is_ready = (stat & 0x4);
- timeout--;
- udelay(5);
- } while (!is_ready || (timeout==0));
- writel(0x2, adapter->regs + A_ESPI_RX_RESET);
- if (timeout==0)
- {
- CH_ERR("ESPI : ERROR : Timeout tricn_init() \n");
- t1_fatal_err(adapter);
+ if (!(readl(adapter->regs + A_ESPI_RX_RESET) & F_RX_CLK_STATUS)) {
+ CH_ERR("%s: ESPI clock not ready\n", adapter->name);
+ return -1;
}
- /* 2 */
- tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
- tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
- tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
- for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
- for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
- for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
- for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
- for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
- for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
- for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80);
- for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
-
- /* 3 */
- writel(0x3, adapter->regs + A_ESPI_RX_RESET);
+ writel(F_ESPI_RX_CORE_RST, adapter->regs + A_ESPI_RX_RESET);
+
+ if (sme) {
+ tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
+ tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
+ tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
+ }
+ for (i = 1; i <= 8; i++)
+ tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
+ for (i = 1; i <= 2; i++)
+ tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
+ for (i = 1; i <= 3; i++)
+ tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
+ tricn_write(adapter, 0, 2, 4, TRICN_CNFG, 0xf1);
+ tricn_write(adapter, 0, 2, 5, TRICN_CNFG, 0xe1);
+ tricn_write(adapter, 0, 2, 6, TRICN_CNFG, 0xf1);
+ tricn_write(adapter, 0, 2, 7, TRICN_CNFG, 0x80);
+ tricn_write(adapter, 0, 2, 8, TRICN_CNFG, 0xf1);
+
+ writel(F_ESPI_RX_CORE_RST | F_ESPI_RX_LNK_RST,
+ adapter->regs + A_ESPI_RX_RESET);
return 0;
}
@@ -143,6 +133,7 @@ void t1_espi_intr_enable(struct peespi *espi)
void t1_espi_intr_clear(struct peespi *espi)
{
+ readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
}
@@ -157,7 +148,6 @@ void t1_espi_intr_disable(struct peespi *espi)
int t1_espi_intr_handler(struct peespi *espi)
{
- u32 cnt;
u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
if (status & F_DIP4ERR)
@@ -177,7 +167,7 @@ int t1_espi_intr_handler(struct peespi *espi)
* Must read the error count to clear the interrupt
* that it causes.
*/
- cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
+ readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
}
/*
@@ -192,7 +182,7 @@ int t1_espi_intr_handler(struct peespi *espi)
const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
{
- return &espi->intr_cnt;
+ return &espi->intr_cnt;
}
static void espi_setup_for_pm3393(adapter_t *adapter)
@@ -210,17 +200,45 @@ static void espi_setup_for_pm3393(adapter_t *adapter)
writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
}
-/* T2 Init part -- */
-/* 1. Set T_ESPI_MISCCTRL_ADDR */
-/* 2. Init ESPI registers. */
-/* 3. Init TriCN Hard Macro */
-int t1_espi_init(struct peespi *espi, int mac_type, int nports)
+static void espi_setup_for_vsc7321(adapter_t *adapter)
+{
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+ writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+ writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+ writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+ writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+ writel(V_RX_NPORTS(4) | V_TX_NPORTS(4), adapter->regs + A_PORT_CONFIG);
+
+ writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
+}
+
+/*
+ * Note that T1B requires at least 2 ports for IXF1010 due to a HW bug.
+ */
+static void espi_setup_for_ixf1010(adapter_t *adapter, int nports)
{
- u32 cnt;
+ writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+ if (nports == 4) {
+ if (is_T2(adapter)) {
+ writel(0xf00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+ writel(0x3c0, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+ } else {
+ writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+ writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+ }
+ } else {
+ writel(0x1fff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+ writel(0x7ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+ }
+ writel(V_RX_NPORTS(nports) | V_TX_NPORTS(nports), adapter->regs + A_PORT_CONFIG);
+}
+
+int t1_espi_init(struct peespi *espi, int mac_type, int nports)
+{
u32 status_enable_extra = 0;
adapter_t *adapter = espi->adapter;
- u32 status, burstval = 0x800100;
/* Disable ESPI training. MACs that can handle it enable it below. */
writel(0, adapter->regs + A_ESPI_TRAIN);
@@ -229,38 +247,20 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
writel(V_OUT_OF_SYNC_COUNT(4) |
V_DIP2_PARITY_ERR_THRES(3) |
V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
- if (nports == 4) {
- /* T204: maxburst1 = 0x40, maxburst2 = 0x20 */
- burstval = 0x200040;
- }
- }
- writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+ writel(nports == 4 ? 0x200040 : 0x1000080,
+ adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+ } else
+ writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
- switch (mac_type) {
- case CHBT_MAC_PM3393:
+ if (mac_type == CHBT_MAC_PM3393)
espi_setup_for_pm3393(adapter);
- break;
- default:
+ else if (mac_type == CHBT_MAC_VSC7321)
+ espi_setup_for_vsc7321(adapter);
+ else if (mac_type == CHBT_MAC_IXF1010) {
+ status_enable_extra = F_INTEL1010MODE;
+ espi_setup_for_ixf1010(adapter, nports);
+ } else
return -1;
- }
-
- /*
- * Make sure any pending interrupts from the SPI are
- * Cleared before enabling the interrupt.
- */
- writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE);
- status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
- if (status & F_DIP2PARITYERR) {
- cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
- }
-
- /*
- * For T1B we need to write 1 to clear ESPI interrupts. For T2+ we
- * write the status as is.
- */
- if (status && t1_is_T1B(espi->adapter))
- status = 1;
- writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
writel(status_enable_extra | F_RXSTATUSENABLE,
adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
@@ -271,9 +271,11 @@ int t1_espi_init(struct peespi *espi, int mac_type, int nports)
* Always position the control at the 1st port egress IN
* (sop,eop) counter to reduce PIOs for T/N210 workaround.
*/
- espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL)
- & ~MON_MASK) | (F_MONITORED_DIRECTION
- | F_MONITORED_INTERFACE);
+ espi->misc_ctrl = readl(adapter->regs + A_ESPI_MISC_CONTROL);
+ espi->misc_ctrl &= ~MON_MASK;
+ espi->misc_ctrl |= F_MONITORED_DIRECTION;
+ if (adapter->params.nports == 1)
+ espi->misc_ctrl |= F_MONITORED_INTERFACE;
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
spin_lock_init(&espi->lock);
}
@@ -299,8 +301,7 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
{
struct peespi *espi = adapter->espi;
- if (!is_T2(adapter))
- return;
+ if (!is_T2(adapter)) return;
spin_lock(&espi->lock);
espi->misc_ctrl = (val & ~MON_MASK) |
(espi->misc_ctrl & MON_MASK);
@@ -310,27 +311,61 @@ void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
{
- u32 sel;
-
struct peespi *espi = adapter->espi;
+ u32 sel;
if (!is_T2(adapter))
return 0;
+
sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
if (!wait) {
if (!spin_trylock(&espi->lock))
return 0;
- }
- else
+ } else
spin_lock(&espi->lock);
+
if ((sel != (espi->misc_ctrl & MON_MASK))) {
writel(((espi->misc_ctrl & ~MON_MASK) | sel),
adapter->regs + A_ESPI_MISC_CONTROL);
sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
- }
- else
+ } else
sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
spin_unlock(&espi->lock);
return sel;
}
+
+/*
+ * This function is for T204 only.
+ * compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
+ * one shot, since there is no per port counter on the out side.
+ */
+int
+t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
+{
+ struct peespi *espi = adapter->espi;
+ u8 i, nport = (u8)adapter->params.nports;
+
+ if (!wait) {
+ if (!spin_trylock(&espi->lock))
+ return -1;
+ } else
+ spin_lock(&espi->lock);
+
+ if ( (espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION ) {
+ espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
+ F_MONITORED_DIRECTION;
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ }
+ for (i = 0 ; i < nport; i++, valp++) {
+ if (i) {
+ writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
+ adapter->regs + A_ESPI_MISC_CONTROL);
+ }
+ *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+ }
+
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ spin_unlock(&espi->lock);
+ return 0;
+}