diff options
Diffstat (limited to 'drivers/net/cxgb3/mc5.c')
| -rw-r--r-- | drivers/net/cxgb3/mc5.c | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/drivers/net/cxgb3/mc5.c b/drivers/net/cxgb3/mc5.c new file mode 100644 index 00000000000..44fa9eaedcc --- /dev/null +++ b/drivers/net/cxgb3/mc5.c @@ -0,0 +1,453 @@ +/* + * This file is part of the Chelsio T3 Ethernet driver. + * + * Copyright (C) 2003-2006 Chelsio Communications. All rights reserved. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the LICENSE file included in this + * release for licensing terms and conditions. + */ + +#include "common.h" +#include "regs.h" + +enum { + IDT75P52100 = 4, + IDT75N43102 = 5 +}; + +/* DBGI command mode */ +enum { + DBGI_MODE_MBUS = 0, + DBGI_MODE_IDT52100 = 5 +}; + +/* IDT 75P52100 commands */ +#define IDT_CMD_READ 0 +#define IDT_CMD_WRITE 1 +#define IDT_CMD_SEARCH 2 +#define IDT_CMD_LEARN 3 + +/* IDT LAR register address and value for 144-bit mode (low 32 bits) */ +#define IDT_LAR_ADR0 0x180006 +#define IDT_LAR_MODE144 0xffff0000 + +/* IDT SCR and SSR addresses (low 32 bits) */ +#define IDT_SCR_ADR0 0x180000 +#define IDT_SSR0_ADR0 0x180002 +#define IDT_SSR1_ADR0 0x180004 + +/* IDT GMR base address (low 32 bits) */ +#define IDT_GMR_BASE_ADR0 0x180020 + +/* IDT data and mask array base addresses (low 32 bits) */ +#define IDT_DATARY_BASE_ADR0 0 +#define IDT_MSKARY_BASE_ADR0 0x80000 + +/* IDT 75N43102 commands */ +#define IDT4_CMD_SEARCH144 3 +#define IDT4_CMD_WRITE 4 +#define IDT4_CMD_READ 5 + +/* IDT 75N43102 SCR address (low 32 bits) */ +#define IDT4_SCR_ADR0 0x3 + +/* IDT 75N43102 GMR base addresses (low 32 bits) */ +#define IDT4_GMR_BASE0 0x10 +#define IDT4_GMR_BASE1 0x20 +#define IDT4_GMR_BASE2 0x30 + +/* IDT 75N43102 data and mask array base addresses (low 32 bits) */ +#define IDT4_DATARY_BASE_ADR0 0x1000000 +#define IDT4_MSKARY_BASE_ADR0 0x2000000 + +#define MAX_WRITE_ATTEMPTS 5 + +#define MAX_ROUTES 2048 + +/* + * Issue a command to the TCAM and wait for its completion. The address and + * any data required by the command must have been setup by the caller. + */ +static int mc5_cmd_write(struct adapter *adapter, u32 cmd) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd); + return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS, + F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1); +} + +static inline void dbgi_wr_addr3(struct adapter *adapter, u32 v1, u32 v2, + u32 v3) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3); +} + +static inline void dbgi_wr_data3(struct adapter *adapter, u32 v1, u32 v2, + u32 v3) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2); + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3); +} + +static inline void dbgi_rd_rsp3(struct adapter *adapter, u32 *v1, u32 *v2, + u32 *v3) +{ + *v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0); + *v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1); + *v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2); +} + +/* + * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM + * command cmd. The data to be written must have been set up by the caller. + * Returns -1 on failure, 0 on success. + */ +static int mc5_write(struct adapter *adapter, u32 addr_lo, u32 cmd) +{ + t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo); + if (mc5_cmd_write(adapter, cmd) == 0) + return 0; + CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n", + addr_lo); + return -1; +} + +static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base, + u32 data_array_base, u32 write_cmd, + int addr_shift) +{ + unsigned int i; + struct adapter *adap = mc5->adapter; + + /* + * We need the size of the TCAM data and mask arrays in terms of + * 72-bit entries. + */ + unsigned int size72 = mc5->tcam_size; + unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX); + + if (mc5->mode == MC5_MODE_144_BIT) { + size72 *= 2; /* 1 144-bit entry is 2 72-bit entries */ + server_base *= 2; + } + + /* Clear the data array */ + dbgi_wr_data3(adap, 0, 0, 0); + for (i = 0; i < size72; i++) + if (mc5_write(adap, data_array_base + (i << addr_shift), + write_cmd)) + return -1; + + /* Initialize the mask array. */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + for (i = 0; i < size72; i++) { + if (i == server_base) /* entering server or routing region */ + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0, + mc5->mode == MC5_MODE_144_BIT ? + 0xfffffff9 : 0xfffffffd); + if (mc5_write(adap, mask_array_base + (i << addr_shift), + write_cmd)) + return -1; + } + return 0; +} + +static int init_idt52100(struct mc5 *mc5) +{ + int i; + struct adapter *adap = mc5->adapter; + + t3_write_reg(adap, A_MC5_DB_RSP_LATENCY, + V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15)); + t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2); + + /* + * Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and + * GMRs 8-9 for ACK- and AOPEN searches. + */ + t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000); + t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN); + t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH); + t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000); + t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ); + + /* Set DBGI command mode for IDT TCAM. */ + t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100); + + /* Set up LAR */ + dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0); + if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE)) + goto err; + + /* Set up SSRs */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0); + if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) || + mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE)) + goto err; + + /* Set up GMRs */ + for (i = 0; i < 32; ++i) { + if (i >= 12 && i < 15) + dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); + else if (i == 15) + dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); + else + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + + if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE)) + goto err; + } + + /* Set up SCR */ + dbgi_wr_data3(adap, 1, 0, 0); + if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE)) + goto err; + + return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0, + IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0); +err: + return -EIO; +} + +static int init_idt43102(struct mc5 *mc5) +{ + int i; + struct adapter *adap = mc5->adapter; + + t3_write_reg(adap, A_MC5_DB_RSP_LATENCY, + adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) : + V_RDLAT(0xd) | V_SRCHLAT(0x12)); + + /* + * Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask + * for ACK- and AOPEN searches. + */ + t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, + IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144); + t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800); + t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800); + t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE); + t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ); + + t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3); + + /* Set DBGI command mode for IDT TCAM. */ + t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100); + + /* Set up GMRs */ + dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff); + for (i = 0; i < 7; ++i) + if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE)) + goto err; + + for (i = 0; i < 4; ++i) + if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE)) + goto err; + + dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff); + if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) || + mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) || + mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE)) + goto err; + + dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff); + if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE)) + goto err; + + /* Set up SCR */ + dbgi_wr_data3(adap, 0xf0000000, 0, 0); + if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE)) + goto err; + + return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0, + IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1); +err: + return -EIO; +} + +/* Put MC5 in DBGI mode. */ +static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5) +{ + t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG, + V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN); +} + +/* Put MC5 in M-Bus mode. */ +static void mc5_dbgi_mode_disable(const struct mc5 *mc5) +{ + t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG, + V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | + V_COMPEN(mc5->mode == MC5_MODE_72_BIT) | + V_PRTYEN(mc5->parity_enabled) | F_MBUSEN); +} + +/* + * Initialization that requires the OS and protocol layers to already + * be intialized goes here. + */ +int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters, + unsigned int nroutes) +{ + u32 cfg; + int err; + unsigned int tcam_size = mc5->tcam_size; + struct adapter *adap = mc5->adapter; + + if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size) + return -EINVAL; + + /* Reset the TCAM */ + cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE; + cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST; + t3_write_reg(adap, A_MC5_DB_CONFIG, cfg); + if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) { + CH_ERR(adap, "TCAM reset timed out\n"); + return -1; + } + + t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes); + t3_write_reg(adap, A_MC5_DB_FILTER_TABLE, + tcam_size - nroutes - nfilters); + t3_write_reg(adap, A_MC5_DB_SERVER_INDEX, + tcam_size - nroutes - nfilters - nservers); + + mc5->parity_enabled = 1; + + /* All the TCAM addresses we access have only the low 32 bits non 0 */ + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0); + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0); + + mc5_dbgi_mode_enable(mc5); + + switch (mc5->part_type) { + case IDT75P52100: + err = init_idt52100(mc5); + break; + case IDT75N43102: + err = init_idt43102(mc5); + break; + default: + CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type); + err = -EINVAL; + break; + } + + mc5_dbgi_mode_disable(mc5); + return err; +} + +/* + * read_mc5_range - dump a part of the memory managed by MC5 + * @mc5: the MC5 handle + * @start: the start address for the dump + * @n: number of 72-bit words to read + * @buf: result buffer + * + * Read n 72-bit words from MC5 memory from the given start location. + */ +int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start, + unsigned int n, u32 *buf) +{ + u32 read_cmd; + int err = 0; + struct adapter *adap = mc5->adapter; + + if (mc5->part_type == IDT75P52100) + read_cmd = IDT_CMD_READ; + else if (mc5->part_type == IDT75N43102) + read_cmd = IDT4_CMD_READ; + else + return -EINVAL; + + mc5_dbgi_mode_enable(mc5); + + while (n--) { + t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++); + if (mc5_cmd_write(adap, read_cmd)) { + err = -EIO; + break; + } + dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf); + buf += 3; + } + + mc5_dbgi_mode_disable(mc5); + return 0; +} + +#define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR) + +/* + * MC5 interrupt handler + */ +void t3_mc5_intr_handler(struct mc5 *mc5) +{ + struct adapter *adap = mc5->adapter; + u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE); + + if ((cause & F_PARITYERR) && mc5->parity_enabled) { + CH_ALERT(adap, "MC5 parity error\n"); + mc5->stats.parity_err++; + } + + if (cause & F_REQQPARERR) { + CH_ALERT(adap, "MC5 request queue parity error\n"); + mc5->stats.reqq_parity_err++; + } + + if (cause & F_DISPQPARERR) { + CH_ALERT(adap, "MC5 dispatch queue parity error\n"); + mc5->stats.dispq_parity_err++; + } + + if (cause & F_ACTRGNFULL) + mc5->stats.active_rgn_full++; + if (cause & F_NFASRCHFAIL) + mc5->stats.nfa_srch_err++; + if (cause & F_UNKNOWNCMD) + mc5->stats.unknown_cmd++; + if (cause & F_DELACTEMPTY) + mc5->stats.del_act_empty++; + if (cause & MC5_INT_FATAL) + t3_fatal_err(adap); + + t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause); +} + +void __devinit t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode) +{ +#define K * 1024 + + static unsigned int tcam_part_size[] = { /* in K 72-bit entries */ + 64 K, 128 K, 256 K, 32 K + }; + +#undef K + + u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG); + + mc5->adapter = adapter; + mc5->mode = (unsigned char)mode; + mc5->part_type = (unsigned char)G_TMTYPE(cfg); + if (cfg & F_TMTYPEHI) + mc5->part_type |= 4; + + mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)]; + if (mode == MC5_MODE_144_BIT) + mc5->tcam_size /= 2; +} |