summaryrefslogtreecommitdiffstats
path: root/drivers/net/cxgb3/t3_hw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/cxgb3/t3_hw.c')
-rw-r--r--drivers/net/cxgb3/t3_hw.c80
1 files changed, 57 insertions, 23 deletions
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index ff262a04ded..31ed31a3428 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -493,20 +493,20 @@ int t3_phy_lasi_intr_handler(struct cphy *phy)
}
static const struct adapter_info t3_adap_info[] = {
- {2, 0,
+ {1, 1, 0,
F_GPIO2_OEN | F_GPIO4_OEN |
F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0,
&mi1_mdio_ops, "Chelsio PE9000"},
- {2, 0,
+ {1, 1, 0,
F_GPIO2_OEN | F_GPIO4_OEN |
F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, { S_GPIO3, S_GPIO5 }, 0,
&mi1_mdio_ops, "Chelsio T302"},
- {1, 0,
+ {1, 0, 0,
F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN |
F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
{ 0 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
&mi1_mdio_ext_ops, "Chelsio T310"},
- {2, 0,
+ {1, 1, 0,
F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN |
F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL |
F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
@@ -514,7 +514,7 @@ static const struct adapter_info t3_adap_info[] = {
&mi1_mdio_ext_ops, "Chelsio T320"},
{},
{},
- {1, 0,
+ {1, 0, 0,
F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO6_OEN | F_GPIO7_OEN |
F_GPIO10_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL,
{ S_GPIO9 }, SUPPORTED_10000baseT_Full | SUPPORTED_AUI,
@@ -2128,16 +2128,40 @@ void t3_port_intr_clear(struct adapter *adapter, int idx)
static int t3_sge_write_context(struct adapter *adapter, unsigned int id,
unsigned int type)
{
- t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
- t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
- t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff);
- t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+ if (type == F_RESPONSEQ) {
+ /*
+ * Can't write the Response Queue Context bits for
+ * Interrupt Armed or the Reserve bits after the chip
+ * has been initialized out of reset. Writing to these
+ * bits can confuse the hardware.
+ */
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0x17ffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+ } else {
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+ }
t3_write_reg(adapter, A_SG_CONTEXT_CMD,
V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
0, SG_CONTEXT_CMD_ATTEMPTS, 1);
}
+/**
+ * clear_sge_ctxt - completely clear an SGE context
+ * @adapter: the adapter
+ * @id: the context id
+ * @type: the context type
+ *
+ * Completely clear an SGE context. Used predominantly at post-reset
+ * initialization. Note in particular that we don't skip writing to any
+ * "sensitive bits" in the contexts the way that t3_sge_write_context()
+ * does ...
+ */
static int clear_sge_ctxt(struct adapter *adap, unsigned int id,
unsigned int type)
{
@@ -2145,7 +2169,14 @@ static int clear_sge_ctxt(struct adapter *adap, unsigned int id,
t3_write_reg(adap, A_SG_CONTEXT_DATA1, 0);
t3_write_reg(adap, A_SG_CONTEXT_DATA2, 0);
t3_write_reg(adap, A_SG_CONTEXT_DATA3, 0);
- return t3_sge_write_context(adap, id, type);
+ t3_write_reg(adap, A_SG_CONTEXT_MASK0, 0xffffffff);
+ t3_write_reg(adap, A_SG_CONTEXT_MASK1, 0xffffffff);
+ t3_write_reg(adap, A_SG_CONTEXT_MASK2, 0xffffffff);
+ t3_write_reg(adap, A_SG_CONTEXT_MASK3, 0xffffffff);
+ t3_write_reg(adap, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
+ return t3_wait_op_done(adap, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, SG_CONTEXT_CMD_ATTEMPTS, 1);
}
/**
@@ -2729,10 +2760,10 @@ static void tp_config(struct adapter *adap, const struct tp_params *p)
F_TCPCHECKSUMOFFLOAD | V_IPTTL(64));
t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) |
F_MTUENABLE | V_WINDOWSCALEMODE(1) |
- V_TIMESTAMPSMODE(0) | V_SACKMODE(1) | V_SACKRX(1));
+ V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1));
t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) |
V_AUTOSTATE2(1) | V_AUTOSTATE1(0) |
- V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) |
+ V_BYTETHRESHOLD(26880) | V_MSSTHRESHOLD(2) |
F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1));
t3_set_reg_field(adap, A_TP_IN_CONFIG, F_RXFBARBPRIO | F_TXFBARBPRIO,
F_IPV6ENABLE | F_NICMODE);
@@ -3196,20 +3227,22 @@ int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask)
}
/*
- * Perform the bits of HW initialization that are dependent on the number
- * of available ports.
+ * Perform the bits of HW initialization that are dependent on the Tx
+ * channels being used.
*/
-static void init_hw_for_avail_ports(struct adapter *adap, int nports)
+static void chan_init_hw(struct adapter *adap, unsigned int chan_map)
{
int i;
- if (nports == 1) {
+ if (chan_map != 3) { /* one channel */
t3_set_reg_field(adap, A_ULPRX_CTL, F_ROUND_ROBIN, 0);
t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0);
- t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN |
- F_PORT0ACTIVE | F_ENFORCEPKT);
- t3_write_reg(adap, A_PM1_TX_CFG, 0xffffffff);
- } else {
+ t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_ENFORCEPKT |
+ (chan_map == 1 ? F_TPTXPORT0EN | F_PORT0ACTIVE :
+ F_TPTXPORT1EN | F_PORT1ACTIVE));
+ t3_write_reg(adap, A_PM1_TX_CFG,
+ chan_map == 1 ? 0xffffffff : 0);
+ } else { /* two channels */
t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN);
t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB);
t3_write_reg(adap, A_ULPTX_DMA_WEIGHT,
@@ -3517,7 +3550,7 @@ int t3_init_hw(struct adapter *adapter, u32 fw_params)
t3_write_reg(adapter, A_PM1_RX_CFG, 0xffffffff);
t3_write_reg(adapter, A_PM1_RX_MODE, 0);
t3_write_reg(adapter, A_PM1_TX_MODE, 0);
- init_hw_for_avail_ports(adapter, adapter->params.nports);
+ chan_init_hw(adapter, adapter->params.chan_map);
t3_sge_init(adapter, &adapter->params.sge);
t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW, calc_gpio_intr(adapter));
@@ -3754,7 +3787,8 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
get_pci_mode(adapter, &adapter->params.pci);
adapter->params.info = ai;
- adapter->params.nports = ai->nports;
+ adapter->params.nports = ai->nports0 + ai->nports1;
+ adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1);
adapter->params.rev = t3_read_reg(adapter, A_PL_REV);
/*
* We used to only run the "adapter check task" once a second if
@@ -3785,7 +3819,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
mc7_prep(adapter, &adapter->pmtx, MC7_PMTX_BASE_ADDR, "PMTX");
mc7_prep(adapter, &adapter->cm, MC7_CM_BASE_ADDR, "CM");
- p->nchan = ai->nports;
+ p->nchan = adapter->params.chan_map == 3 ? 2 : 1;
p->pmrx_size = t3_mc7_size(&adapter->pmrx);
p->pmtx_size = t3_mc7_size(&adapter->pmtx);
p->cm_size = t3_mc7_size(&adapter->cm);