diff options
Diffstat (limited to 'drivers/net/cxgb3')
| -rw-r--r-- | drivers/net/cxgb3/cxgb3_main.c | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index 9d14652ffdc..1b9a711beb8 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2316,6 +2316,112 @@ void t3_fatal_err(struct adapter *adapter) } +/** + * t3_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t t3_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + int i; + + /* Stop all ports */ + for_each_port(adapter, i) { + struct net_device *netdev = adapter->port[i]; + + if (netif_running(netdev)) + cxgb_close(netdev); + } + + if (is_offload(adapter) && + test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map)) + offload_close(&adapter->tdev); + + /* Free sge resources */ + t3_free_sge_resources(adapter); + + adapter->flags &= ~FULL_INIT_DONE; + + pci_disable_device(pdev); + + /* Request a slot slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * t3_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t t3_io_slot_reset(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + if (pci_enable_device(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset.\n"); + return PCI_ERS_RESULT_DISCONNECT; + } + pci_set_master(pdev); + + t3_prep_adapter(adapter, adapter->params.info, 1); + + return PCI_ERS_RESULT_RECOVERED; +} + +/** + * t3_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void t3_io_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + int i; + + /* Restart the ports */ + for_each_port(adapter, i) { + struct net_device *netdev = adapter->port[i]; + + if (netif_running(netdev)) { + if (cxgb_open(netdev)) { + dev_err(&pdev->dev, + "can't bring device back up" + " after reset\n"); + continue; + } + netif_device_attach(netdev); + } + } + + if (is_offload(adapter)) { + __set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map); + if (offload_open(dev)) + printk(KERN_WARNING + "Could not bring back offload capabilities\n"); + } +} + +static struct pci_error_handlers t3_err_handler = { + .error_detected = t3_io_error_detected, + .slot_reset = t3_io_slot_reset, + .resume = t3_io_resume, +}; + static int __devinit cxgb_enable_msix(struct adapter *adap) { struct msix_entry entries[SGE_QSETS + 1]; @@ -2616,6 +2722,7 @@ static struct pci_driver driver = { .id_table = cxgb3_pci_tbl, .probe = init_one, .remove = __devexit_p(remove_one), + .err_handler = &t3_err_handler, }; static int __init cxgb3_init_module(void) |