diff options
Diffstat (limited to 'drivers/net/cxgb4vf/cxgb4vf_main.c')
| -rw-r--r-- | drivers/net/cxgb4vf/cxgb4vf_main.c | 2889 |
1 files changed, 2889 insertions, 0 deletions
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c new file mode 100644 index 00000000000..7b6d07f50c7 --- /dev/null +++ b/drivers/net/cxgb4vf/cxgb4vf_main.c @@ -0,0 +1,2889 @@ +/* + * This file is part of the Chelsio T4 PCI-E SR-IOV Virtual Function Ethernet + * driver for Linux. + * + * Copyright (c) 2009-2010 Chelsio Communications, Inc. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/version.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/debugfs.h> +#include <linux/ethtool.h> + +#include "t4vf_common.h" +#include "t4vf_defs.h" + +#include "../cxgb4/t4_regs.h" +#include "../cxgb4/t4_msg.h" + +/* + * Generic information about the driver. + */ +#define DRV_VERSION "1.0.0" +#define DRV_DESC "Chelsio T4 Virtual Function (VF) Network Driver" + +/* + * Module Parameters. + * ================== + */ + +/* + * Default ethtool "message level" for adapters. + */ +#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \ + NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\ + NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR) + +static int dflt_msg_enable = DFLT_MSG_ENABLE; + +module_param(dflt_msg_enable, int, 0644); +MODULE_PARM_DESC(dflt_msg_enable, + "default adapter ethtool message level bitmap"); + +/* + * The driver uses the best interrupt scheme available on a platform in the + * order MSI-X then MSI. This parameter determines which of these schemes the + * driver may consider as follows: + * + * msi = 2: choose from among MSI-X and MSI + * msi = 1: only consider MSI interrupts + * + * Note that unlike the Physical Function driver, this Virtual Function driver + * does _not_ support legacy INTx interrupts (this limitation is mandated by + * the PCI-E SR-IOV standard). + */ +#define MSI_MSIX 2 +#define MSI_MSI 1 +#define MSI_DEFAULT MSI_MSIX + +static int msi = MSI_DEFAULT; + +module_param(msi, int, 0644); +MODULE_PARM_DESC(msi, "whether to use MSI-X or MSI"); + +/* + * Fundamental constants. + * ====================== + */ + +enum { + MAX_TXQ_ENTRIES = 16384, + MAX_RSPQ_ENTRIES = 16384, + MAX_RX_BUFFERS = 16384, + + MIN_TXQ_ENTRIES = 32, + MIN_RSPQ_ENTRIES = 128, + MIN_FL_ENTRIES = 16, + + /* + * For purposes of manipulating the Free List size we need to + * recognize that Free Lists are actually Egress Queues (the host + * produces free buffers which the hardware consumes), Egress Queues + * indices are all in units of Egress Context Units bytes, and free + * list entries are 64-bit PCI DMA addresses. And since the state of + * the Producer Index == the Consumer Index implies an EMPTY list, we + * always have at least one Egress Unit's worth of Free List entries + * unused. See sge.c for more details ... + */ + EQ_UNIT = SGE_EQ_IDXSIZE, + FL_PER_EQ_UNIT = EQ_UNIT / sizeof(__be64), + MIN_FL_RESID = FL_PER_EQ_UNIT, +}; + +/* + * Global driver state. + * ==================== + */ + +static struct dentry *cxgb4vf_debugfs_root; + +/* + * OS "Callback" functions. + * ======================== + */ + +/* + * The link status has changed on the indicated "port" (Virtual Interface). + */ +void t4vf_os_link_changed(struct adapter *adapter, int pidx, int link_ok) +{ + struct net_device *dev = adapter->port[pidx]; + + /* + * If the port is disabled or the current recorded "link up" + * status matches the new status, just return. + */ + if (!netif_running(dev) || link_ok == netif_carrier_ok(dev)) + return; + + /* + * Tell the OS that the link status has changed and print a short + * informative message on the console about the event. + */ + if (link_ok) { + const char *s; + const char *fc; + const struct port_info *pi = netdev_priv(dev); + + netif_carrier_on(dev); + + switch (pi->link_cfg.speed) { + case SPEED_10000: + s = "10Gbps"; + break; + + case SPEED_1000: + s = "1000Mbps"; + break; + + case SPEED_100: + s = "100Mbps"; + break; + + default: + s = "unknown"; + break; + } + + switch (pi->link_cfg.fc) { + case PAUSE_RX: + fc = "RX"; + break; + + case PAUSE_TX: + fc = "TX"; + break; + + case PAUSE_RX|PAUSE_TX: + fc = "RX/TX"; + break; + + default: + fc = "no"; + break; + } + + printk(KERN_INFO "%s: link up, %s, full-duplex, %s PAUSE\n", + dev->name, s, fc); + } else { + netif_carrier_off(dev); + printk(KERN_INFO "%s: link down\n", dev->name); + } +} + +/* + * Net device operations. + * ====================== + */ + +/* + * Record our new VLAN Group and enable/disable hardware VLAN Tag extraction + * based on whether the specified VLAN Group pointer is NULL or not. + */ +static void cxgb4vf_vlan_rx_register(struct net_device *dev, + struct vlan_group *grp) +{ + struct port_info *pi = netdev_priv(dev); + + pi->vlan_grp = grp; + t4vf_set_rxmode(pi->adapter, pi->viid, -1, -1, -1, -1, grp != NULL, 0); +} + +/* + * Perform the MAC and PHY actions needed to enable a "port" (Virtual + * Interface). + */ +static int link_start(struct net_device *dev) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + + /* + * We do not set address filters and promiscuity here, the stack does + * that step explicitly. + */ + ret = t4vf_set_rxmode(pi->adapter, pi->viid, dev->mtu, -1, -1, -1, -1, + true); + if (ret == 0) { + ret = t4vf_change_mac(pi->adapter, pi->viid, + pi->xact_addr_filt, dev->dev_addr, true); + if (ret >= 0) { + pi->xact_addr_filt = ret; + ret = 0; + } + } + + /* + * We don't need to actually "start the link" itself since the + * firmware will do that for us when the first Virtual Interface + * is enabled on a port. + */ + if (ret == 0) + ret = t4vf_enable_vi(pi->adapter, pi->viid, true, true); + return ret; +} + +/* + * Name the MSI-X interrupts. + */ +static void name_msix_vecs(struct adapter *adapter) +{ + int namelen = sizeof(adapter->msix_info[0].desc) - 1; + int pidx; + + /* + * Firmware events. + */ + snprintf(adapter->msix_info[MSIX_FW].desc, namelen, + "%s-FWeventq", adapter->name); + adapter->msix_info[MSIX_FW].desc[namelen] = 0; + + /* + * Ethernet queues. + */ + for_each_port(adapter, pidx) { + struct net_device *dev = adapter->port[pidx]; + const struct port_info *pi = netdev_priv(dev); + int qs, msi; + + for (qs = 0, msi = MSIX_NIQFLINT; + qs < pi->nqsets; + qs++, msi++) { + snprintf(adapter->msix_info[msi].desc, namelen, + "%s-%d", dev->name, qs); + adapter->msix_info[msi].desc[namelen] = 0; + } + } +} + +/* + * Request all of our MSI-X resources. + */ +static int request_msix_queue_irqs(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int rxq, msi, err; + + /* + * Firmware events. + */ + err = request_irq(adapter->msix_info[MSIX_FW].vec, t4vf_sge_intr_msix, + 0, adapter->msix_info[MSIX_FW].desc, &s->fw_evtq); + if (err) + return err; + + /* + * Ethernet queues. + */ + msi = MSIX_NIQFLINT; + for_each_ethrxq(s, rxq) { + err = request_irq(adapter->msix_info[msi].vec, + t4vf_sge_intr_msix, 0, + adapter->msix_info[msi].desc, + &s->ethrxq[rxq].rspq); + if (err) + goto err_free_irqs; + msi++; + } + return 0; + +err_free_irqs: + while (--rxq >= 0) + free_irq(adapter->msix_info[--msi].vec, &s->ethrxq[rxq].rspq); + free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq); + return err; +} + +/* + * Free our MSI-X resources. + */ +static void free_msix_queue_irqs(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int rxq, msi; + + free_irq(adapter->msix_info[MSIX_FW].vec, &s->fw_evtq); + msi = MSIX_NIQFLINT; + for_each_ethrxq(s, rxq) + free_irq(adapter->msix_info[msi++].vec, + &s->ethrxq[rxq].rspq); +} + +/* + * Turn on NAPI and start up interrupts on a response queue. + */ +static void qenable(struct sge_rspq *rspq) +{ + napi_enable(&rspq->napi); + + /* + * 0-increment the Going To Sleep register to start the timer and + * enable interrupts. + */ + t4_write_reg(rspq->adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS, + CIDXINC(0) | + SEINTARM(rspq->intr_params) | + INGRESSQID(rspq->cntxt_id)); +} + +/* + * Enable NAPI scheduling and interrupt generation for all Receive Queues. + */ +static void enable_rx(struct adapter *adapter) +{ + int rxq; + struct sge *s = &adapter->sge; + + for_each_ethrxq(s, rxq) + qenable(&s->ethrxq[rxq].rspq); + qenable(&s->fw_evtq); + + /* + * The interrupt queue doesn't use NAPI so we do the 0-increment of + * its Going To Sleep register here to get it started. + */ + if (adapter->flags & USING_MSI) + t4_write_reg(adapter, T4VF_SGE_BASE_ADDR + SGE_VF_GTS, + CIDXINC(0) | + SEINTARM(s->intrq.intr_params) | + INGRESSQID(s->intrq.cntxt_id)); + +} + +/* + * Wait until all NAPI handlers are descheduled. + */ +static void quiesce_rx(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int rxq; + + for_each_ethrxq(s, rxq) + napi_disable(&s->ethrxq[rxq].rspq.napi); + napi_disable(&s->fw_evtq.napi); +} + +/* + * Response queue handler for the firmware event queue. + */ +static int fwevtq_handler(struct sge_rspq *rspq, const __be64 *rsp, + const struct pkt_gl *gl) +{ + /* + * Extract response opcode and get pointer to CPL message body. + */ + struct adapter *adapter = rspq->adapter; + u8 opcode = ((const struct rss_header *)rsp)->opcode; + void *cpl = (void *)(rsp + 1); + + switch (opcode) { + case CPL_FW6_MSG: { + /* + * We've received an asynchronous message from the firmware. + */ + const struct cpl_fw6_msg *fw_msg = cpl; + if (fw_msg->type == FW6_TYPE_CMD_RPL) + t4vf_handle_fw_rpl(adapter, fw_msg->data); + break; + } + + case CPL_SGE_EGR_UPDATE: { + /* + * We've received an Egress Queue Status Update message. We + * get these, if the SGE is configured to send these when the + * firmware passes certain points in processing our TX + * Ethernet Queue or if we make an explicit request for one. + * We use these updates to determine when we may need to + * restart a TX Ethernet Queue which was stopped for lack of + * free TX Queue Descriptors ... + */ + const struct cpl_sge_egr_update *p = (void *)cpl; + unsigned int qid = EGR_QID(be32_to_cpu(p->opcode_qid)); + struct sge *s = &adapter->sge; + struct sge_txq *tq; + struct sge_eth_txq *txq; + unsigned int eq_idx; + + /* + * Perform sanity checking on the Queue ID to make sure it + * really refers to one of our TX Ethernet Egress Queues which + * is active and matches the queue's ID. None of these error + * conditions should ever happen so we may want to either make + * them fatal and/or conditionalized under DEBUG. + */ + eq_idx = EQ_IDX(s, qid); + if (unlikely(eq_idx >= MAX_EGRQ)) { + dev_err(adapter->pdev_dev, + "Egress Update QID %d out of range\n", qid); + break; + } + tq = s->egr_map[eq_idx]; + if (unlikely(tq == NULL)) { + dev_err(adapter->pdev_dev, + "Egress Update QID %d TXQ=NULL\n", qid); + break; + } + txq = container_of(tq, struct sge_eth_txq, q); + if (unlikely(tq->abs_id != qid)) { + dev_err(adapter->pdev_dev, + "Egress Update QID %d refers to TXQ %d\n", + qid, tq->abs_id); + break; + } + + /* + * Restart a stopped TX Queue which has less than half of its + * TX ring in use ... + */ + txq->q.restarts++; + netif_tx_wake_queue(txq->txq); + break; + } + + default: + dev_err(adapter->pdev_dev, + "unexpected CPL %#x on FW event queue\n", opcode); + } + + return 0; +} + +/* + * Allocate SGE TX/RX response queues. Determine how many sets of SGE queues + * to use and initializes them. We support multiple "Queue Sets" per port if + * we have MSI-X, otherwise just one queue set per port. + */ +static int setup_sge_queues(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int err, pidx, msix; + + /* + * Clear "Queue Set" Free List Starving and TX Queue Mapping Error + * state. + */ + bitmap_zero(s->starving_fl, MAX_EGRQ); + + /* + * If we're using MSI interrupt mode we need to set up a "forwarded + * interrupt" queue which we'll set up with our MSI vector. The rest + * of the ingress queues will be set up to forward their interrupts to + * this queue ... This must be first since t4vf_sge_alloc_rxq() uses + * the intrq's queue ID as the interrupt forwarding queue for the + * subsequent calls ... + */ + if (adapter->flags & USING_MSI) { + err = t4vf_sge_alloc_rxq(adapter, &s->intrq, false, + adapter->port[0], 0, NULL, NULL); + if (err) + goto err_free_queues; + } + + /* + * Allocate our ingress queue for asynchronous firmware messages. + */ + err = t4vf_sge_alloc_rxq(adapter, &s->fw_evtq, true, adapter->port[0], + MSIX_FW, NULL, fwevtq_handler); + if (err) + goto err_free_queues; + + /* + * Allocate each "port"'s initial Queue Sets. These can be changed + * later on ... up to the point where any interface on the adapter is + * brought up at which point lots of things get nailed down + * permanently ... + */ + msix = MSIX_NIQFLINT; + for_each_port(adapter, pidx) { + struct net_device *dev = adapter->port[pidx]; + struct port_info *pi = netdev_priv(dev); + struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset]; + struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset]; + int qs; + + for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { + err = t4vf_sge_alloc_rxq(adapter, &rxq->rspq, false, + dev, msix++, + &rxq->fl, t4vf_ethrx_handler); + if (err) + goto err_free_queues; + + err = t4vf_sge_alloc_eth_txq(adapter, txq, dev, + netdev_get_tx_queue(dev, qs), + s->fw_evtq.cntxt_id); + if (err) + goto err_free_queues; + + rxq->rspq.idx = qs; + memset(&rxq->stats, 0, sizeof(rxq->stats)); + } + } + + /* + * Create the reverse mappings for the queues. + */ + s->egr_base = s->ethtxq[0].q.abs_id - s->ethtxq[0].q.cntxt_id; + s->ingr_base = s->ethrxq[0].rspq.abs_id - s->ethrxq[0].rspq.cntxt_id; + IQ_MAP(s, s->fw_evtq.abs_id) = &s->fw_evtq; + for_each_port(adapter, pidx) { + struct net_device *dev = adapter->port[pidx]; + struct port_info *pi = netdev_priv(dev); + struct sge_eth_rxq *rxq = &s->ethrxq[pi->first_qset]; + struct sge_eth_txq *txq = &s->ethtxq[pi->first_qset]; + int qs; + + for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { + IQ_MAP(s, rxq->rspq.abs_id) = &rxq->rspq; + EQ_MAP(s, txq->q.abs_id) = &txq->q; + + /* + * The FW_IQ_CMD doesn't return the Absolute Queue IDs + * for Free Lists but since all of the Egress Queues + * (including Free Lists) have Relative Queue IDs + * which are computed as Absolute - Base Queue ID, we + * can synthesize the Absolute Queue IDs for the Free + * Lists. This is useful for debugging purposes when + * we want to dump Queue Contexts via the PF Driver. + */ + rxq->fl.abs_id = rxq->fl.cntxt_id + s->egr_base; + EQ_MAP(s, rxq->fl.abs_id) = &rxq->fl; + } + } + return 0; + +err_free_queues: + t4vf_free_sge_resources(adapter); + return err; +} + +/* + * Set up Receive Side Scaling (RSS) to distribute packets to multiple receive + * queues. We configure the RSS CPU lookup table to distribute to the number + * of HW receive queues, and the response queue lookup table to narrow that + * down to the response queues actually configured for each "port" (Virtual + * Interface). We always configure the RSS mapping for all ports since the + * mapping table has plenty of entries. + */ +static int setup_rss(struct adapter *adapter) +{ + int pidx; + + for_each_port(adapter, pidx) { + struct port_info *pi = adap2pinfo(adapter, pidx); + struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset]; + u16 rss[MAX_PORT_QSETS]; + int qs, err; + + for (qs = 0; qs < pi->nqsets; qs++) + rss[qs] = rxq[qs].rspq.abs_id; + + err = t4vf_config_rss_range(adapter, pi->viid, + 0, pi->rss_size, rss, pi->nqsets); + if (err) + return err; + + /* + * Perform Global RSS Mode-specific initialization. + */ + switch (adapter->params.rss.mode) { + case FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL: + /* + * If Tunnel All Lookup isn't specified in the global + * RSS Configuration, then we need to specify a + * default Ingress Queue for any ingress packets which + * aren't hashed. We'll use our first ingress queue + * ... + */ + if (!adapter->params.rss.u.basicvirtual.tnlalllookup) { + union rss_vi_config config; + err = t4vf_read_rss_vi_config(adapter, + pi->viid, + &config); + if (err) + return err; + config.basicvirtual.defaultq = + rxq[0].rspq.abs_id; + err = t4vf_write_rss_vi_config(adapter, + pi->viid, + &config); + if (err) + return err; + } + break; + } + } + + return 0; +} + +/* + * Bring the adapter up. Called whenever we go from no "ports" open to having + * one open. This function performs the actions necessary to make an adapter + * operational, such as completing the initialization of HW modules, and + * enabling interrupts. Must be called with the rtnl lock held. (Note that + * this is called "cxgb_up" in the PF Driver.) + */ +static int adapter_up(struct adapter *adapter) +{ + int err; + + /* + * If this is the first time we've been called, perform basic + * adapter setup. Once we've done this, many of our adapter + * parameters can no longer be changed ... + */ + if ((adapter->flags & FULL_INIT_DONE) == 0) { + err = setup_sge_queues(adapter); + if (err) + return err; + err = setup_rss(adapter); + if (err) { + t4vf_free_sge_resources(adapter); + return err; + } + + if (adapter->flags & USING_MSIX) + name_msix_vecs(adapter); + adapter->flags |= FULL_INIT_DONE; + } + + /* + * Acquire our interrupt resources. We only support MSI-X and MSI. + */ + BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0); + if (adapter->flags & USING_MSIX) + err = request_msix_queue_irqs(adapter); + else + err = request_irq(adapter->pdev->irq, + t4vf_intr_handler(adapter), 0, + adapter->name, adapter); + if (err) { + dev_err(adapter->pdev_dev, "request_irq failed, err %d\n", + err); + return err; + } + + /* + * Enable NAPI ingress processing and return success. + */ + enable_rx(adapter); + t4vf_sge_start(adapter); + return 0; +} + +/* + * Bring the adapter down. Called whenever the last "port" (Virtual + * Interface) closed. (Note that this routine is called "cxgb_down" in the PF + * Driver.) + */ +static void adapter_down(struct adapter *adapter) +{ + /* + * Free interrupt resources. + */ + if (adapter->flags & USING_MSIX) + free_msix_queue_irqs(adapter); + else + free_irq(adapter->pdev->irq, adapter); + + /* + * Wait for NAPI handlers to finish. + */ + quiesce_rx(adapter); +} + +/* + * Start up a net device. + */ +static int cxgb4vf_open(struct net_device *dev) +{ + int err; + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + /* + * If this is the first interface that we're opening on the "adapter", + * bring the "adapter" up now. + */ + if (adapter->open_device_map == 0) { + err = adapter_up(adapter); + if (err) + return err; + } + + /* + * Note that this interface is up and start everything up ... + */ + dev->real_num_tx_queues = pi->nqsets; + set_bit(pi->port_id, &adapter->open_device_map); + link_start(dev); + netif_tx_start_all_queues(dev); + return 0; +} + +/* + * Shut down a net device. This routine is called "cxgb_close" in the PF + * Driver ... + */ +static int cxgb4vf_stop(struct net_device *dev) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + netif_tx_stop_all_queues(dev); + netif_carrier_off(dev); + ret = t4vf_enable_vi(adapter, pi->viid, false, false); + pi->link_cfg.link_ok = 0; + + clear_bit(pi->port_id, &adapter->open_device_map); + if (adapter->open_device_map == 0) + adapter_down(adapter); + return 0; +} + +/* + * Translate our basic statistics into the standard "ifconfig" statistics. + */ +static struct net_device_stats *cxgb4vf_get_stats(struct net_device *dev) +{ + struct t4vf_port_stats stats; + struct port_info *pi = netdev2pinfo(dev); + struct adapter *adapter = pi->adapter; + struct net_device_stats *ns = &dev->stats; + int err; + + spin_lock(&adapter->stats_lock); + err = t4vf_get_port_stats(adapter, pi->pidx, &stats); + spin_unlock(&adapter->stats_lock); + + memset(ns, 0, sizeof(*ns)); + if (err) + return ns; + + ns->tx_bytes = (stats.tx_bcast_bytes + stats.tx_mcast_bytes + + stats.tx_ucast_bytes + stats.tx_offload_bytes); + ns->tx_packets = (stats.tx_bcast_frames + stats.tx_mcast_frames + + stats.tx_ucast_frames + stats.tx_offload_frames); + ns->rx_bytes = (stats.rx_bcast_bytes + stats.rx_mcast_bytes + + stats.rx_ucast_bytes); + ns->rx_packets = (stats.rx_bcast_frames + stats.rx_mcast_frames + + stats.rx_ucast_frames); + ns->multicast = stats.rx_mcast_frames; + ns->tx_errors = stats.tx_drop_frames; + ns->rx_errors = stats.rx_err_frames; + + return ns; +} + +/* + * Collect up to maxaddrs worth of a netdevice's unicast addresses into an + * array of addrss pointers and return the number collected. + */ +static inline int collect_netdev_uc_list_addrs(const struct net_device *dev, + const u8 **addr, + unsigned int maxaddrs) +{ + unsigned int naddr = 0; + const struct netdev_hw_addr *ha; + + for_each_dev_addr(dev, ha) { + addr[naddr++] = ha->addr; + if (naddr >= maxaddrs) + break; + } + return naddr; +} + +/* + * Collect up to maxaddrs worth of a netdevice's multicast addresses into an + * array of addrss pointers and return the number collected. + */ +static inline int collect_netdev_mc_list_addrs(const struct net_device *dev, + const u8 **addr, + unsigned int maxaddrs) +{ + unsigned int naddr = 0; + const struct netdev_hw_addr *ha; + + netdev_for_each_mc_addr(ha, dev) { + addr[naddr++] = ha->addr; + if (naddr >= maxaddrs) + break; + } + return naddr; +} + +/* + * Configure the exact and hash address filters to handle a port's multicast + * and secondary unicast MAC addresses. + */ +static int set_addr_filters(const struct net_device *dev, bool sleep) +{ + u64 mhash = 0; + u64 uhash = 0; + bool free = true; + u16 filt_idx[7]; + const u8 *addr[7]; + int ret, naddr = 0; + const struct port_info *pi = netdev_priv(dev); + + /* first do the secondary unicast addresses */ + naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr)); + if (naddr > 0) { + ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free, + naddr, addr, filt_idx, &uhash, sleep); + if (ret < 0) + return ret; + + free = false; + } + + /* next set up the multicast addresses */ + naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr)); + if (naddr > 0) { + ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free, + naddr, addr, filt_idx, &mhash, sleep); + if (ret < 0) + return ret; + } + + return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0, + uhash | mhash, sleep); +} + +/* + * Set RX properties of a port, such as promiscruity, address filters, and MTU. + * If @mtu is -1 it is left unchanged. + */ +static int set_rxmode(struct net_device *dev, int mtu, bool sleep_ok) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + + ret = set_addr_filters(dev, sleep_ok); + if (ret == 0) + ret = t4vf_set_rxmode(pi->adapter, pi->viid, -1, + (dev->flags & IFF_PROMISC) != 0, + (dev->flags & IFF_ALLMULTI) != 0, + 1, -1, sleep_ok); + return ret; +} + +/* + * Set the current receive modes on the device. + */ +static void cxgb4vf_set_rxmode(struct net_device *dev) +{ + /* unfortunately we can't return errors to the stack */ + set_rxmode(dev, -1, false); +} + +/* + * Find the entry in the interrupt holdoff timer value array which comes + * closest to the specified interrupt holdoff value. + */ +static int closest_timer(const struct sge *s, int us) +{ + int i, timer_idx = 0, min_delta = INT_MAX; + + for (i = 0; i < ARRAY_SIZE(s->timer_val); i++) { + int delta = us - s->timer_val[i]; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + timer_idx = i; + } + } + return timer_idx; +} + +static int closest_thres(const struct sge *s, int thres) +{ + int i, delta, pktcnt_idx = 0, min_delta = INT_MAX; + + for (i = 0; i < ARRAY_SIZE(s->counter_val); i++) { + delta = thres - s->counter_val[i]; + if (delta < 0) + delta = -delta; + if (delta < min_delta) { + min_delta = delta; + pktcnt_idx = i; + } + } + return pktcnt_idx; +} + +/* + * Return a queue's interrupt hold-off time in us. 0 means no timer. + */ +static unsigned int qtimer_val(const struct adapter *adapter, + const struct sge_rspq *rspq) +{ + unsigned int timer_idx = QINTR_TIMER_IDX_GET(rspq->intr_params); + + return timer_idx < SGE_NTIMERS + ? adapter->sge.timer_val[timer_idx] + : 0; +} + +/** + * set_rxq_intr_params - set a queue's interrupt holdoff parameters + * @adapter: the adapter + * @rspq: the RX response queue + * @us: the hold-off time in us, or 0 to disable timer + * @cnt: the hold-off packet count, or 0 to disable counter + * + * Sets an RX response queue's interrupt hold-off time and packet count. + * At least one of the two needs to be enabled for the queue to generate + * interrupts. + */ +static int set_rxq_intr_params(struct adapter *adapter, struct sge_rspq *rspq, + unsigned int us, unsigned int cnt) +{ + unsigned int timer_idx; + + /* + * If both the interrupt holdoff timer and count are specified as + * zero, default to a holdoff count of 1 ... + */ + if ((us | cnt) == 0) + cnt = 1; + + /* + * If an interrupt holdoff count has been specified, then find the + * closest configured holdoff count and use that. If the response + * queue has already been created, then update its queue context + * parameters ... + */ + if (cnt) { + int err; + u32 v, pktcnt_idx; + + pktcnt_idx = closest_thres(&adapter->sge, cnt); + if (rspq->desc && rspq->pktcnt_idx != pktcnt_idx) { + v = FW_PARAMS_MNEM(FW_PARAMS_MNEM_DMAQ) | + FW_PARAMS_PARAM_X( + FW_PARAMS_PARAM_DMAQ_IQ_INTCNTTHRESH) | + FW_PARAMS_PARAM_YZ(rspq->cntxt_id); + err = t4vf_set_params(adapter, 1, &v, &pktcnt_idx); + if (err) + return err; + } + rspq->pktcnt_idx = pktcnt_idx; + } + + /* + * Compute the closest holdoff timer index from the supplied holdoff + * timer value. + */ + timer_idx = (us == 0 + ? SGE_TIMER_RSTRT_CNTR + : closest_timer(&adapter->sge, us)); + + /* + * Update the response queue's interrupt coalescing parameters and + * return success. + */ + rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) | + (cnt > 0 ? QINTR_CNT_EN : 0)); + return 0; +} + +/* + * Return a version number to identify the type of adapter. The scheme is: + * - bits 0..9: chip version + * - bits 10..15: chip revision + */ +static inline unsigned int mk_adap_vers(const struct adapter *adapter) +{ + /* + * Chip version 4, revision 0x3f (cxgb4vf). + */ + return 4 | (0x3f << 10); +} + +/* + * Execute the specified ioctl command. + */ +static int cxgb4vf_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + int ret = 0; + + switch (cmd) { + /* + * The VF Driver doesn't have access to any of the other + * common Ethernet device ioctl()'s (like reading/writing + * PHY registers, etc. + */ + + default: + ret = -EOPNOTSUPP; + break; + } + return ret; +} + +/* + * Change the device's MTU. + */ +static int cxgb4vf_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + struct port_info *pi = netdev_priv(dev); + + /* accommodate SACK */ + if (new_mtu < 81) + return -EINVAL; + + ret = t4vf_set_rxmode(pi->adapter, pi->viid, new_mtu, + -1, -1, -1, -1, true); + if (!ret) + dev->mtu = new_mtu; + return ret; +} + +/* + * Change the devices MAC address. + */ +static int cxgb4vf_set_mac_addr(struct net_device *dev, void *_addr) +{ + int ret; + struct sockaddr *addr = _addr; + struct port_info *pi = netdev_priv(dev); + + if (!is_valid_ether_addr(addr->sa_data)) + return -EINVAL; + + ret = t4vf_change_mac(pi->adapter, pi->viid, pi->xact_addr_filt, + addr->sa_data, true); + if (ret < 0) + return ret; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + pi->xact_addr_filt = ret; + return 0; +} + +/* + * Return a TX Queue on which to send the specified skb. + */ +static u16 cxgb4vf_select_queue(struct net_device *dev, struct sk_buff *skb) +{ + /* + * XXX For now just use the default hash but we probably want to + * XXX look at other possibilities ... + */ + return skb_tx_hash(dev, skb); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Poll all of our receive queues. This is called outside of normal interrupt + * context. + */ +static void cxgb4vf_poll_controller(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + if (adapter->flags & USING_MSIX) { + struct sge_eth_rxq *rxq; + int nqsets; + + rxq = &adapter->sge.ethrxq[pi->first_qset]; + for (nqsets = pi->nqsets; nqsets; nqsets--) { + t4vf_sge_intr_msix(0, &rxq->rspq); + rxq++; + } + } else + t4vf_intr_handler(adapter)(0, adapter); +} +#endif + +/* + * Ethtool operations. + * =================== + * + * Note that we don't support any ethtool operations which change the physical + * state of the port to which we're linked. + */ + +/* + * Return current port link settings. + */ +static int cxgb4vf_get_settings(struct net_device *dev, + struct ethtool_cmd *cmd) +{ + const struct port_info *pi = netdev_priv(dev); + + cmd->supported = pi->link_cfg.supported; + cmd->advertising = pi->link_cfg.advertising; + cmd->speed = netif_carrier_ok(dev) ? pi->link_cfg.speed : -1; + cmd->duplex = DUPLEX_FULL; + + cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE; + cmd->phy_address = pi->port_id; + cmd->transceiver = XCVR_EXTERNAL; + cmd->autoneg = pi->link_cfg.autoneg; + cmd->maxtxpkt = 0; + cmd->maxrxpkt = 0; + return 0; +} + +/* + * Return our driver information. + */ +static void cxgb4vf_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *drvinfo) +{ + struct adapter *adapter = netdev2adap(dev); + + strcpy(drvinfo->driver, KBUILD_MODNAME); + strcpy(drvinfo->version, DRV_VERSION); + strcpy(drvinfo->bus_info, pci_name(to_pci_dev(dev->dev.parent))); + snprintf(drvinfo->fw_version, sizeof(drvinfo->fw_version), + "%u.%u.%u.%u, TP %u.%u.%u.%u", + FW_HDR_FW_VER_MAJOR_GET(adapter->params.dev.fwrev), + FW_HDR_FW_VER_MINOR_GET(adapter->params.dev.fwrev), + FW_HDR_FW_VER_MICRO_GET(adapter->params.dev.fwrev), + FW_HDR_FW_VER_BUILD_GET(adapter->params.dev.fwrev), + FW_HDR_FW_VER_MAJOR_GET(adapter->params.dev.tprev), + FW_HDR_FW_VER_MINOR_GET(adapter->params.dev.tprev), + FW_HDR_FW_VER_MICRO_GET(adapter->params.dev.tprev), + FW_HDR_FW_VER_BUILD_GET(adapter->params.dev.tprev)); +} + +/* + * Return current adapter message level. + */ +static u32 cxgb4vf_get_msglevel(struct net_device *dev) +{ + return netdev2adap(dev)->msg_enable; +} + +/* + * Set current adapter message level. + */ +static void cxgb4vf_set_msglevel(struct net_device *dev, u32 msglevel) +{ + netdev2adap(dev)->msg_enable = msglevel; +} + +/* + * Return the device's current Queue Set ring size parameters along with the + * allowed maximum values. Since ethtool doesn't understand the concept of + * multi-queue devices, we just return the current values associated with the + * first Queue Set. + */ +static void cxgb4vf_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *rp) +{ + const struct port_info *pi = netdev_priv(dev); + const struct sge *s = &pi->adapter->sge; + + rp->rx_max_pending = MAX_RX_BUFFERS; + rp->rx_mini_max_pending = MAX_RSPQ_ENTRIES; + rp->rx_jumbo_max_pending = 0; + rp->tx_max_pending = MAX_TXQ_ENTRIES; + + rp->rx_pending = s->ethrxq[pi->first_qset].fl.size - MIN_FL_RESID; + rp->rx_mini_pending = s->ethrxq[pi->first_qset].rspq.size; + rp->rx_jumbo_pending = 0; + rp->tx_pending = s->ethtxq[pi->first_qset].q.size; +} + +/* + * Set the Queue Set ring size parameters for the device. Again, since + * ethtool doesn't allow for the concept of multiple queues per device, we'll + * apply these new values across all of the Queue Sets associated with the + * device -- after vetting them of course! + */ +static int cxgb4vf_set_ringparam(struct net_device *dev, + struct ethtool_ringparam *rp) +{ + const struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + struct sge *s = &adapter->sge; + int qs; + + if (rp->rx_pending > MAX_RX_BUFFERS || + rp->rx_jumbo_pending || + rp->tx_pending > MAX_TXQ_ENTRIES || + rp->rx_mini_pending > MAX_RSPQ_ENTRIES || + rp->rx_mini_pending < MIN_RSPQ_ENTRIES || + rp->rx_pending < MIN_FL_ENTRIES || + rp->tx_pending < MIN_TXQ_ENTRIES) + return -EINVAL; + + if (adapter->flags & FULL_INIT_DONE) + return -EBUSY; + + for (qs = pi->first_qset; qs < pi->first_qset + pi->nqsets; qs++) { + s->ethrxq[qs].fl.size = rp->rx_pending + MIN_FL_RESID; + s->ethrxq[qs].rspq.size = rp->rx_mini_pending; + s->ethtxq[qs].q.size = rp->tx_pending; + } + return 0; +} + +/* + * Return the interrupt holdoff timer and count for the first Queue Set on the + * device. Our extension ioctl() (the cxgbtool interface) allows the + * interrupt holdoff timer to be read on all of the device's Queue Sets. + */ +static int cxgb4vf_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *coalesce) +{ + const struct port_info *pi = netdev_priv(dev); + const struct adapter *adapter = pi->adapter; + const struct sge_rspq *rspq = &adapter->sge.ethrxq[pi->first_qset].rspq; + + coalesce->rx_coalesce_usecs = qtimer_val(adapter, rspq); + coalesce->rx_max_coalesced_frames = + ((rspq->intr_params & QINTR_CNT_EN) + ? adapter->sge.counter_val[rspq->pktcnt_idx] + : 0); + return 0; +} + +/* + * Set the RX interrupt holdoff timer and count for the first Queue Set on the + * interface. Our extension ioctl() (the cxgbtool interface) allows us to set + * the interrupt holdoff timer on any of the device's Queue Sets. + */ +static int cxgb4vf_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *coalesce) +{ + const struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + return set_rxq_intr_params(adapter, + &adapter->sge.ethrxq[pi->first_qset].rspq, + coalesce->rx_coalesce_usecs, + coalesce->rx_max_coalesced_frames); +} + +/* + * Report current port link pause parameter settings. + */ +static void cxgb4vf_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pauseparam) +{ + struct port_info *pi = netdev_priv(dev); + + pauseparam->autoneg = (pi->link_cfg.requested_fc & PAUSE_AUTONEG) != 0; + pauseparam->rx_pause = (pi->link_cfg.fc & PAUSE_RX) != 0; + pauseparam->tx_pause = (pi->link_cfg.fc & PAUSE_TX) != 0; +} + +/* + * Return whether RX Checksum Offloading is currently enabled for the device. + */ +static u32 cxgb4vf_get_rx_csum(struct net_device *dev) +{ + struct port_info *pi = netdev_priv(dev); + + return (pi->rx_offload & RX_CSO) != 0; +} + +/* + * Turn RX Checksum Offloading on or off for the device. + */ +static int cxgb4vf_set_rx_csum(struct net_device *dev, u32 csum) +{ + struct port_info *pi = netdev_priv(dev); + + if (csum) + pi->rx_offload |= RX_CSO; + else + pi->rx_offload &= ~RX_CSO; + return 0; +} + +/* + * Identify the port by blinking the port's LED. + */ +static int cxgb4vf_phys_id(struct net_device *dev, u32 id) +{ + struct port_info *pi = netdev_priv(dev); + + return t4vf_identify_port(pi->adapter, pi->viid, 5); +} + +/* + * Port stats maintained per queue of the port. + */ +struct queue_port_stats { + u64 tso; + u64 tx_csum; + u64 rx_csum; + u64 vlan_ex; + u64 vlan_ins; +}; + +/* + * Strings for the ETH_SS_STATS statistics set ("ethtool -S"). Note that + * these need to match the order of statistics returned by + * t4vf_get_port_stats(). + */ +static const char stats_strings[][ETH_GSTRING_LEN] = { + /* + * These must match the layout of the t4vf_port_stats structure. + */ + "TxBroadcastBytes ", + "TxBroadcastFrames ", + "TxMulticastBytes ", + "TxMulticastFrames ", + "TxUnicastBytes ", + "TxUnicastFrames ", + "TxDroppedFrames ", + "TxOffloadBytes ", + "TxOffloadFrames ", + "RxBroadcastBytes ", + "RxBroadcastFrames ", + "RxMulticastBytes ", + "RxMulticastFrames ", + "RxUnicastBytes ", + "RxUnicastFrames ", + "RxErrorFrames ", + + /* + * These are accumulated per-queue statistics and must match the + * order of the fields in the queue_port_stats structure. + */ + "TSO ", + "TxCsumOffload ", + "RxCsumGood ", + "VLANextractions ", + "VLANinsertions ", +}; + +/* + * Return the number of statistics in the specified statistics set. + */ +static int cxgb4vf_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_STATS: + return ARRAY_SIZE(stats_strings); + default: + return -EOPNOTSUPP; + } + /*NOTREACHED*/ +} + +/* + * Return the strings for the specified statistics set. + */ +static void cxgb4vf_get_strings(struct net_device *dev, + u32 sset, + u8 *data) +{ + switch (sset) { + case ETH_SS_STATS: + memcpy(data, stats_strings, sizeof(stats_strings)); + break; + } +} + +/* + * Small utility routine to accumulate queue statistics across the queues of + * a "port". + */ +static void collect_sge_port_stats(const struct adapter *adapter, + const struct port_info *pi, + struct queue_port_stats *stats) +{ + const struct sge_eth_txq *txq = &adapter->sge.ethtxq[pi->first_qset]; + const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[pi->first_qset]; + int qs; + + memset(stats, 0, sizeof(*stats)); + for (qs = 0; qs < pi->nqsets; qs++, rxq++, txq++) { + stats->tso += txq->tso; + stats->tx_csum += txq->tx_cso; + stats->rx_csum += rxq->stats.rx_cso; + stats->vlan_ex += rxq->stats.vlan_ex; + stats->vlan_ins += txq->vlan_ins; + } +} + +/* + * Return the ETH_SS_STATS statistics set. + */ +static void cxgb4vf_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, + u64 *data) +{ + struct port_info *pi = netdev2pinfo(dev); + struct adapter *adapter = pi->adapter; + int err = t4vf_get_port_stats(adapter, pi->pidx, + (struct t4vf_port_stats *)data); + if (err) + memset(data, 0, sizeof(struct t4vf_port_stats)); + + data += sizeof(struct t4vf_port_stats) / sizeof(u64); + collect_sge_port_stats(adapter, pi, (struct queue_port_stats *)data); +} + +/* + * Return the size of our register map. + */ +static int cxgb4vf_get_regs_len(struct net_device *dev) +{ + return T4VF_REGMAP_SIZE; +} + +/* + * Dump a block of registers, start to end inclusive, into a buffer. + */ +static void reg_block_dump(struct adapter *adapter, void *regbuf, + unsigned int start, unsigned int end) +{ + u32 *bp = regbuf + start - T4VF_REGMAP_START; + + for ( ; start <= end; start += sizeof(u32)) { + /* + * Avoid reading the Mailbox Control register since that + * can trigger a Mailbox Ownership Arbitration cycle and + * interfere with communication with the firmware. + */ + if (start == T4VF_CIM_BASE_ADDR + CIM_VF_EXT_MAILBOX_CTRL) + *bp++ = 0xffff; + else + *bp++ = t4_read_reg(adapter, start); + } +} + +/* + * Copy our entire register map into the provided buffer. + */ +static void cxgb4vf_get_regs(struct net_device *dev, + struct ethtool_regs *regs, + void *regbuf) +{ + struct adapter *adapter = netdev2adap(dev); + + regs->version = mk_adap_vers(adapter); + + /* + * Fill in register buffer with our register map. + */ + memset(regbuf, 0, T4VF_REGMAP_SIZE); + + reg_block_dump(adapter, regbuf, + T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_FIRST, + T4VF_SGE_BASE_ADDR + T4VF_MOD_MAP_SGE_LAST); + reg_block_dump(adapter, regbuf, + T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_FIRST, + T4VF_MPS_BASE_ADDR + T4VF_MOD_MAP_MPS_LAST); + reg_block_dump(adapter, regbuf, + T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_FIRST, + T4VF_PL_BASE_ADDR + T4VF_MOD_MAP_PL_LAST); + reg_block_dump(adapter, regbuf, + T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_FIRST, + T4VF_CIM_BASE_ADDR + T4VF_MOD_MAP_CIM_LAST); + + reg_block_dump(adapter, regbuf, + T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_FIRST, + T4VF_MBDATA_BASE_ADDR + T4VF_MBDATA_LAST); +} + +/* + * Report current Wake On LAN settings. + */ +static void cxgb4vf_get_wol(struct net_device *dev, + struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +/* + * Set TCP Segmentation Offloading feature capabilities. + */ +static int cxgb4vf_set_tso(struct net_device *dev, u32 tso) +{ + if (tso) + dev->features |= NETIF_F_TSO | NETIF_F_TSO6; + else + dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + return 0; +} + +static struct ethtool_ops cxgb4vf_ethtool_ops = { + .get_settings = cxgb4vf_get_settings, + .get_drvinfo = cxgb4vf_get_drvinfo, + .get_msglevel = cxgb4vf_get_msglevel, + .set_msglevel = cxgb4vf_set_msglevel, + .get_ringparam = cxgb4vf_get_ringparam, + .set_ringparam = cxgb4vf_set_ringparam, + .get_coalesce = cxgb4vf_get_coalesce, + .set_coalesce = cxgb4vf_set_coalesce, + .get_pauseparam = cxgb4vf_get_pauseparam, + .get_rx_csum = cxgb4vf_get_rx_csum, + .set_rx_csum = cxgb4vf_set_rx_csum, + .set_tx_csum = ethtool_op_set_tx_ipv6_csum, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_strings = cxgb4vf_get_strings, + .phys_id = cxgb4vf_phys_id, + .get_sset_count = cxgb4vf_get_sset_count, + .get_ethtool_stats = cxgb4vf_get_ethtool_stats, + .get_regs_len = cxgb4vf_get_regs_len, + .get_regs = cxgb4vf_get_regs, + .get_wol = cxgb4vf_get_wol, + .set_tso = cxgb4vf_set_tso, +}; + +/* + * /sys/kernel/debug/cxgb4vf support code and data. + * ================================================ + */ + +/* + * Show SGE Queue Set information. We display QPL Queues Sets per line. + */ +#define QPL 4 + +static int sge_qinfo_show(struct seq_file *seq, void *v) +{ + struct adapter *adapter = seq->private; + int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL); + int qs, r = (uintptr_t)v - 1; + + if (r) + seq_putc(seq, '\n'); + + #define S3(fmt_spec, s, v) \ + do {\ + seq_printf(seq, "%-12s", s); \ + for (qs = 0; qs < n; ++qs) \ + seq_printf(seq, " %16" fmt_spec, v); \ + seq_putc(seq, '\n'); \ + } while (0) + #define S(s, v) S3("s", s, v) + #define T(s, v) S3("u", s, txq[qs].v) + #define R(s, v) S3("u", s, rxq[qs].v) + + if (r < eth_entries) { + const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL]; + const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL]; + int n = min(QPL, adapter->sge.ethqsets - QPL * r); + + S("QType:", "Ethernet"); + S("Interface:", + (rxq[qs].rspq.netdev + ? rxq[qs].rspq.netdev->name + : "N/A")); + S3("d", "Port:", + (rxq[qs].rspq.netdev + ? ((struct port_info *) + netdev_priv(rxq[qs].rspq.netdev))->port_id + : -1)); + T("TxQ ID:", q.abs_id); + T("TxQ size:", q.size); + T("TxQ inuse:", q.in_use); + T("TxQ PIdx:", q.pidx); + T("TxQ CIdx:", q.cidx); + R("RspQ ID:", rspq.abs_id); + R("RspQ size:", rspq.size); + R("RspQE size:", rspq.iqe_len); + S3("u", "Intr delay:", qtimer_val(adapter, &rxq[qs].rspq)); + S3("u", "Intr pktcnt:", + adapter->sge.counter_val[rxq[qs].rspq.pktcnt_idx]); + R("RspQ CIdx:", rspq.cidx); + R("RspQ Gen:", rspq.gen); + R("FL ID:", fl.abs_id); + R("FL size:", fl.size - MIN_FL_RESID); + R("FL avail:", fl.avail); + R("FL PIdx:", fl.pidx); + R("FL CIdx:", fl.cidx); + return 0; + } + + r -= eth_entries; + if (r == 0) { + const struct sge_rspq *evtq = &adapter->sge.fw_evtq; + + seq_printf(seq, "%-12s %16s\n", "QType:", "FW event queue"); + seq_printf(seq, "%-12s %16u\n", "RspQ ID:", evtq->abs_id); + seq_printf(seq, "%-12s %16u\n", "Intr delay:", + qtimer_val(adapter, evtq)); + seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:", + adapter->sge.counter_val[evtq->pktcnt_idx]); + seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", evtq->cidx); + seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", evtq->gen); + } else if (r == 1) { + const struct sge_rspq *intrq = &adapter->sge.intrq; + + seq_printf(seq, "%-12s %16s\n", "QType:", "Interrupt Queue"); + seq_printf(seq, "%-12s %16u\n", "RspQ ID:", intrq->abs_id); + seq_printf(seq, "%-12s %16u\n", "Intr delay:", + qtimer_val(adapter, intrq)); + seq_printf(seq, "%-12s %16u\n", "Intr pktcnt:", + adapter->sge.counter_val[intrq->pktcnt_idx]); + seq_printf(seq, "%-12s %16u\n", "RspQ Cidx:", intrq->cidx); + seq_printf(seq, "%-12s %16u\n", "RspQ Gen:", intrq->gen); + } + + #undef R + #undef T + #undef S + #undef S3 + + return 0; +} + +/* + * Return the number of "entries" in our "file". We group the multi-Queue + * sections with QPL Queue Sets per "entry". The sections of the output are: + * + * Ethernet RX/TX Queue Sets + * Firmware Event Queue + * Forwarded Interrupt Queue (if in MSI mode) + */ +static int sge_queue_entries(const struct adapter *adapter) +{ + return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 + + ((adapter->flags & USING_MSI) != 0); +} + +static void *sge_queue_start(struct seq_file *seq, loff_t *pos) +{ + int entries = sge_queue_entries(seq->private); + + return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; +} + +static void sge_queue_stop(struct seq_file *seq, void *v) +{ +} + +static void *sge_queue_next(struct seq_file *seq, void *v, loff_t *pos) +{ + int entries = sge_queue_entries(seq->private); + + ++*pos; + return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; +} + +static const struct seq_operations sge_qinfo_seq_ops = { + .start = sge_queue_start, + .next = sge_queue_next, + .stop = sge_queue_stop, + .show = sge_qinfo_show +}; + +static int sge_qinfo_open(struct inode *inode, struct file *file) +{ + int res = seq_open(file, &sge_qinfo_seq_ops); + + if (!res) { + struct seq_file *seq = file->private_data; + seq->private = inode->i_private; + } + return res; +} + +static const struct file_operations sge_qinfo_debugfs_fops = { + .owner = THIS_MODULE, + .open = sge_qinfo_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * Show SGE Queue Set statistics. We display QPL Queues Sets per line. + */ +#define QPL 4 + +static int sge_qstats_show(struct seq_file *seq, void *v) +{ + struct adapter *adapter = seq->private; + int eth_entries = DIV_ROUND_UP(adapter->sge.ethqsets, QPL); + int qs, r = (uintptr_t)v - 1; + + if (r) + seq_putc(seq, '\n'); + + #define S3(fmt, s, v) \ + do { \ + seq_printf(seq, "%-16s", s); \ + for (qs = 0; qs < n; ++qs) \ + seq_printf(seq, " %8" fmt, v); \ + seq_putc(seq, '\n'); \ + } while (0) + #define S(s, v) S3("s", s, v) + + #define T3(fmt, s, v) S3(fmt, s, txq[qs].v) + #define T(s, v) T3("lu", s, v) + + #define R3(fmt, s, v) S3(fmt, s, rxq[qs].v) + #define R(s, v) R3("lu", s, v) + + if (r < eth_entries) { + const struct sge_eth_rxq *rxq = &adapter->sge.ethrxq[r * QPL]; + const struct sge_eth_txq *txq = &adapter->sge.ethtxq[r * QPL]; + int n = min(QPL, adapter->sge.ethqsets - QPL * r); + + S("QType:", "Ethernet"); + S("Interface:", + (rxq[qs].rspq.netdev + ? rxq[qs].rspq.netdev->name + : "N/A")); + R3("u", "RspQNullInts:", rspq.unhandled_irqs); + R("RxPackets:", stats.pkts); + R("RxCSO:", stats.rx_cso); + R("VLANxtract:", stats.vlan_ex); + R("LROmerged:", stats.lro_merged); + R("LROpackets:", stats.lro_pkts); + R("RxDrops:", stats.rx_drops); + T("TSO:", tso); + T("TxCSO:", tx_cso); + T("VLANins:", vlan_ins); + T("TxQFull:", q.stops); + T("TxQRestarts:", q.restarts); + T("TxMapErr:", mapping_err); + R("FLAllocErr:", fl.alloc_failed); + R("FLLrgAlcErr:", fl.large_alloc_failed); + R("FLStarving:", fl.starving); + return 0; + } + + r -= eth_entries; + if (r == 0) { + const struct sge_rspq *evtq = &adapter->sge.fw_evtq; + + seq_printf(seq, "%-8s %16s\n", "QType:", "FW event queue"); + seq_printf(seq, "%-16s %8u\n", "RspQNullInts:", + evtq->unhandled_irqs); + seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", evtq->cidx); + seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", evtq->gen); + } else if (r == 1) { + const struct sge_rspq *intrq = &adapter->sge.intrq; + + seq_printf(seq, "%-8s %16s\n", "QType:", "Interrupt Queue"); + seq_printf(seq, "%-16s %8u\n", "RspQNullInts:", + intrq->unhandled_irqs); + seq_printf(seq, "%-16s %8u\n", "RspQ CIdx:", intrq->cidx); + seq_printf(seq, "%-16s %8u\n", "RspQ Gen:", intrq->gen); + } + + #undef R + #undef T + #undef S + #undef R3 + #undef T3 + #undef S3 + + return 0; +} + +/* + * Return the number of "entries" in our "file". We group the multi-Queue + * sections with QPL Queue Sets per "entry". The sections of the output are: + * + * Ethernet RX/TX Queue Sets + * Firmware Event Queue + * Forwarded Interrupt Queue (if in MSI mode) + */ +static int sge_qstats_entries(const struct adapter *adapter) +{ + return DIV_ROUND_UP(adapter->sge.ethqsets, QPL) + 1 + + ((adapter->flags & USING_MSI) != 0); +} + +static void *sge_qstats_start(struct seq_file *seq, loff_t *pos) +{ + int entries = sge_qstats_entries(seq->private); + + return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; +} + +static void sge_qstats_stop(struct seq_file *seq, void *v) +{ +} + +static void *sge_qstats_next(struct seq_file *seq, void *v, loff_t *pos) +{ + int entries = sge_qstats_entries(seq->private); + + (*pos)++; + return *pos < entries ? (void *)((uintptr_t)*pos + 1) : NULL; +} + +static const struct seq_operations sge_qstats_seq_ops = { + .start = sge_qstats_start, + .next = sge_qstats_next, + .stop = sge_qstats_stop, + .show = sge_qstats_show +}; + +static int sge_qstats_open(struct inode *inode, struct file *file) +{ + int res = seq_open(file, &sge_qstats_seq_ops); + + if (res == 0) { + struct seq_file *seq = file->private_data; + seq->private = inode->i_private; + } + return res; +} + +static const struct file_operations sge_qstats_proc_fops = { + .owner = THIS_MODULE, + .open = sge_qstats_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * Show PCI-E SR-IOV Virtual Function Resource Limits. + */ +static int resources_show(struct seq_file *seq, void *v) +{ + struct adapter *adapter = seq->private; + struct vf_resources *vfres = &adapter->params.vfres; + + #define S(desc, fmt, var) \ + seq_printf(seq, "%-60s " fmt "\n", \ + desc " (" #var "):", vfres->var) + + S("Virtual Interfaces", "%d", nvi); + S("Egress Queues", "%d", neq); + S("Ethernet Control", "%d", nethctrl); + S("Ingress Queues/w Free Lists/Interrupts", "%d", niqflint); + S("Ingress Queues", "%d", niq); + S("Traffic Class", "%d", tc); + S("Port Access Rights Mask", "%#x", pmask); + S("MAC Address Filters", "%d", nexactf); + S("Firmware Command Read Capabilities", "%#x", r_caps); + S("Firmware Command Write/Execute Capabilities", "%#x", wx_caps); + + #undef S + + return 0; +} + +static int resources_open(struct inode *inode, struct file *file) +{ + return single_open(file, resources_show, inode->i_private); +} + +static const struct file_operations resources_proc_fops = { + .owner = THIS_MODULE, + .open = resources_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +/* + * Show Virtual Interfaces. + */ +static int interfaces_show(struct seq_file *seq, void *v) +{ + if (v == SEQ_START_TOKEN) { + seq_puts(seq, "Interface Port VIID\n"); + } else { + struct adapter *adapter = seq->private; + int pidx = (uintptr_t)v - 2; + struct net_device *dev = adapter->port[pidx]; + struct port_info *pi = netdev_priv(dev); + + seq_printf(seq, "%9s %4d %#5x\n", + dev->name, pi->port_id, pi->viid); + } + return 0; +} + +static inline void *interfaces_get_idx(struct adapter *adapter, loff_t pos) +{ + return pos <= adapter->params.nports + ? (void *)(uintptr_t)(pos + 1) + : NULL; +} + +static void *interfaces_start(struct seq_file *seq, loff_t *pos) +{ + return *pos + ? interfaces_get_idx(seq->private, *pos) + : SEQ_START_TOKEN; +} + +static void *interfaces_next(struct seq_file *seq, void *v, loff_t *pos) +{ + (*pos)++; + return interfaces_get_idx(seq->private, *pos); +} + +static void interfaces_stop(struct seq_file *seq, void *v) +{ +} + +static const struct seq_operations interfaces_seq_ops = { + .start = interfaces_start, + .next = interfaces_next, + .stop = interfaces_stop, + .show = interfaces_show +}; + +static int interfaces_open(struct inode *inode, struct file *file) +{ + int res = seq_open(file, &interfaces_seq_ops); + + if (res == 0) { + struct seq_file *seq = file->private_data; + seq->private = inode->i_private; + } + return res; +} + +static const struct file_operations interfaces_proc_fops = { + .owner = THIS_MODULE, + .open = interfaces_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/* + * /sys/kernel/debugfs/cxgb4vf/ files list. + */ +struct cxgb4vf_debugfs_entry { + const char *name; /* name of debugfs node */ + mode_t mode; /* file system mode */ + const struct file_operations *fops; +}; + +static struct cxgb4vf_debugfs_entry debugfs_files[] = { + { "sge_qinfo", S_IRUGO, &sge_qinfo_debugfs_fops }, + { "sge_qstats", S_IRUGO, &sge_qstats_proc_fops }, + { "resources", S_IRUGO, &resources_proc_fops }, + { "interfaces", S_IRUGO, &interfaces_proc_fops }, +}; + +/* + * Module and device initialization and cleanup code. + * ================================================== + */ + +/* + * Set up out /sys/kernel/debug/cxgb4vf sub-nodes. We assume that the + * directory (debugfs_root) has already been set up. + */ +static int __devinit setup_debugfs(struct adapter *adapter) +{ + int i; + + BUG_ON(adapter->debugfs_root == NULL); + + /* + * Debugfs support is best effort. + */ + for (i = 0; i < ARRAY_SIZE(debugfs_files); i++) + (void)debugfs_create_file(debugfs_files[i].name, + debugfs_files[i].mode, + adapter->debugfs_root, + (void *)adapter, + debugfs_files[i].fops); + + return 0; +} + +/* + * Tear down the /sys/kernel/debug/cxgb4vf sub-nodes created above. We leave + * it to our caller to tear down the directory (debugfs_root). + */ +static void __devexit cleanup_debugfs(struct adapter *adapter) +{ + BUG_ON(adapter->debugfs_root == NULL); + + /* + * Unlike our sister routine cleanup_proc(), we don't need to remove + * individual entries because a call will be made to + * debugfs_remove_recursive(). We just need to clean up any ancillary + * persistent state. + */ + /* nothing to do */ +} + +/* + * Perform early "adapter" initialization. This is where we discover what + * adapter parameters we're going to be using and initialize basic adapter + * hardware support. + */ +static int adap_init0(struct adapter *adapter) +{ + struct vf_resources *vfres = &adapter->params.vfres; + struct sge_params *sge_params = &adapter->params.sge; + struct sge *s = &adapter->sge; + unsigned int ethqsets; + int err; + + /* + * Wait for the device to become ready before proceeding ... + */ + err = t4vf_wait_dev_ready(adapter); + if (err) { + dev_err(adapter->pdev_dev, "device didn't become ready:" + " err=%d\n", err); + return err; + } + + /* + * Grab basic operational parameters. These will predominantly have + * been set up by the Physical Function Driver or will be hard coded + * into the adapter. We just have to live with them ... Note that + * we _must_ get our VPD parameters before our SGE parameters because + * we need to know the adapter's core clock from the VPD in order to + * properly decode the SGE Timer Values. + */ + err = t4vf_get_dev_params(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to retrieve adapter" + " device parameters: err=%d\n", err); + return err; + } + err = t4vf_get_vpd_params(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to retrieve adapter" + " VPD parameters: err=%d\n", err); + return err; + } + err = t4vf_get_sge_params(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to retrieve adapter" + " SGE parameters: err=%d\n", err); + return err; + } + err = t4vf_get_rss_glb_config(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to retrieve adapter" + " RSS parameters: err=%d\n", err); + return err; + } + if (adapter->params.rss.mode != + FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) { + dev_err(adapter->pdev_dev, "unable to operate with global RSS" + " mode %d\n", adapter->params.rss.mode); + return -EINVAL; + } + err = t4vf_sge_init(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to use adapter parameters:" + " err=%d\n", err); + return err; + } + + /* + * Retrieve our RX interrupt holdoff timer values and counter + * threshold values from the SGE parameters. + */ + s->timer_val[0] = core_ticks_to_us(adapter, + TIMERVALUE0_GET(sge_params->sge_timer_value_0_and_1)); + s->timer_val[1] = core_ticks_to_us(adapter, + TIMERVALUE1_GET(sge_params->sge_timer_value_0_and_1)); + s->timer_val[2] = core_ticks_to_us(adapter, + TIMERVALUE0_GET(sge_params->sge_timer_value_2_and_3)); + s->timer_val[3] = core_ticks_to_us(adapter, + TIMERVALUE1_GET(sge_params->sge_timer_value_2_and_3)); + s->timer_val[4] = core_ticks_to_us(adapter, + TIMERVALUE0_GET(sge_params->sge_timer_value_4_and_5)); + s->timer_val[5] = core_ticks_to_us(adapter, + TIMERVALUE1_GET(sge_params->sge_timer_value_4_and_5)); + + s->counter_val[0] = + THRESHOLD_0_GET(sge_params->sge_ingress_rx_threshold); + s->counter_val[1] = + THRESHOLD_1_GET(sge_params->sge_ingress_rx_threshold); + s->counter_val[2] = + THRESHOLD_2_GET(sge_params->sge_ingress_rx_threshold); + s->counter_val[3] = + THRESHOLD_3_GET(sge_params->sge_ingress_rx_threshold); + + /* + * Grab our Virtual Interface resource allocation, extract the + * features that we're interested in and do a bit of sanity testing on + * what we discover. + */ + err = t4vf_get_vfres(adapter); + if (err) { + dev_err(adapter->pdev_dev, "unable to get virtual interface" + " resources: err=%d\n", err); + return err; + } + + /* + * The number of "ports" which we support is equal to the number of + * Virtual Interfaces with which we've been provisioned. + */ + adapter->params.nports = vfres->nvi; + if (adapter->params.nports > MAX_NPORTS) { + dev_warn(adapter->pdev_dev, "only using %d of %d allowed" + " virtual interfaces\n", MAX_NPORTS, + adapter->params.nports); + adapter->params.nports = MAX_NPORTS; + } + + /* + * We need to reserve a number of the ingress queues with Free List + * and Interrupt capabilities for special interrupt purposes (like + * asynchronous firmware messages, or forwarded interrupts if we're + * using MSI). The rest of the FL/Intr-capable ingress queues will be + * matched up one-for-one with Ethernet/Control egress queues in order + * to form "Queue Sets" which will be aportioned between the "ports". + * For each Queue Set, we'll need the ability to allocate two Egress + * Contexts -- one for the Ingress Queue Free List and one for the TX + * Ethernet Queue. + */ + ethqsets = vfres->niqflint - INGQ_EXTRAS; + if (vfres->nethctrl != ethqsets) { + dev_warn(adapter->pdev_dev, "unequal number of [available]" + " ingress/egress queues (%d/%d); using minimum for" + " number of Queue Sets\n", ethqsets, vfres->nethctrl); + ethqsets = min(vfres->nethctrl, ethqsets); + } + if (vfres->neq < ethqsets*2) { + dev_warn(adapter->pdev_dev, "Not enough Egress Contexts (%d)" + " to support Queue Sets (%d); reducing allowed Queue" + " Sets\n", vfres->neq, ethqsets); + ethqsets = vfres->neq/2; + } + if (ethqsets > MAX_ETH_QSETS) { + dev_warn(adapter->pdev_dev, "only using %d of %d allowed Queue" + " Sets\n", MAX_ETH_QSETS, adapter->sge.max_ethqsets); + ethqsets = MAX_ETH_QSETS; + } + if (vfres->niq != 0 || vfres->neq > ethqsets*2) { + dev_warn(adapter->pdev_dev, "unused resources niq/neq (%d/%d)" + " ignored\n", vfres->niq, vfres->neq - ethqsets*2); + } + adapter->sge.max_ethqsets = ethqsets; + + /* + * Check for various parameter sanity issues. Most checks simply + * result in us using fewer resources than our provissioning but we + * do need at least one "port" with which to work ... + */ + if (adapter->sge.max_ethqsets < adapter->params.nports) { + dev_warn(adapter->pdev_dev, "only using %d of %d available" + " virtual interfaces (too few Queue Sets)\n", + adapter->sge.max_ethqsets, adapter->params.nports); + adapter->params.nports = adapter->sge.max_ethqsets; + } + if (adapter->params.nports == 0) { + dev_err(adapter->pdev_dev, "no virtual interfaces configured/" + "usable!\n"); + return -EINVAL; + } + return 0; +} + +static inline void init_rspq(struct sge_rspq *rspq, u8 timer_idx, + u8 pkt_cnt_idx, unsigned int size, + unsigned int iqe_size) +{ + rspq->intr_params = (QINTR_TIMER_IDX(timer_idx) | + (pkt_cnt_idx < SGE_NCOUNTERS ? QINTR_CNT_EN : 0)); + rspq->pktcnt_idx = (pkt_cnt_idx < SGE_NCOUNTERS + ? pkt_cnt_idx + : 0); + rspq->iqe_len = iqe_size; + rspq->size = size; +} + +/* + * Perform default configuration of DMA queues depending on the number and + * type of ports we found and the number of available CPUs. Most settings can + * be modified by the admin via ethtool and cxgbtool prior to the adapter + * being brought up for the first time. + */ +static void __devinit cfg_queues(struct adapter *adapter) +{ + struct sge *s = &adapter->sge; + int q10g, n10g, qidx, pidx, qs; + + /* + * We should not be called till we know how many Queue Sets we can + * support. In particular, this means that we need to know what kind + * of interrupts we'll be using ... + */ + BUG_ON((adapter->flags & (USING_MSIX|USING_MSI)) == 0); + + /* + * Count the number of 10GbE Virtual Interfaces that we have. + */ + n10g = 0; + for_each_port(adapter, pidx) + n10g += is_10g_port(&adap2pinfo(adapter, pidx)->link_cfg); + + /* + * We default to 1 queue per non-10G port and up to # of cores queues + * per 10G port. + */ + if (n10g == 0) + q10g = 0; + else { + int n1g = (adapter->params.nports - n10g); + q10g = (adapter->sge.max_ethqsets - n1g) / n10g; + if (q10g > num_online_cpus()) + q10g = num_online_cpus(); + } + + /* + * Allocate the "Queue Sets" to the various Virtual Interfaces. + * The layout will be established in setup_sge_queues() when the + * adapter is brough up for the first time. + */ + qidx = 0; + for_each_port(adapter, pidx) { + struct port_info *pi = adap2pinfo(adapter, pidx); + + pi->first_qset = qidx; + pi->nqsets = is_10g_port(&pi->link_cfg) ? q10g : 1; + qidx += pi->nqsets; + } + s->ethqsets = qidx; + + /* + * Set up default Queue Set parameters ... Start off with the + * shortest interrupt holdoff timer. + */ + for (qs = 0; qs < s->max_ethqsets; qs++) { + struct sge_eth_rxq *rxq = &s->ethrxq[qs]; + struct sge_eth_txq *txq = &s->ethtxq[qs]; + + init_rspq(&rxq->rspq, 0, 0, 1024, L1_CACHE_BYTES); + rxq->fl.size = 72; + txq->q.size = 1024; + } + + /* + * The firmware event queue is used for link state changes and + * notifications of TX DMA completions. + */ + init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512, + L1_CACHE_BYTES); + + /* + * The forwarded interrupt queue is used when we're in MSI interrupt + * mode. In this mode all interrupts associated with RX queues will + * be forwarded to a single queue which we'll associate with our MSI + * interrupt vector. The messages dropped in the forwarded interrupt + * queue will indicate which ingress queue needs servicing ... This + * queue needs to be large enough to accommodate all of the ingress + * queues which are forwarding their interrupt (+1 to prevent the PIDX + * from equalling the CIDX if every ingress queue has an outstanding + * interrupt). The queue doesn't need to be any larger because no + * ingress queue will ever have more than one outstanding interrupt at + * any time ... + */ + init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1, + L1_CACHE_BYTES); +} + +/* + * Reduce the number of Ethernet queues across all ports to at most n. + * n provides at least one queue per port. + */ +static void __devinit reduce_ethqs(struct adapter *adapter, int n) +{ + int i; + struct port_info *pi; + + /* + * While we have too many active Ether Queue Sets, interate across the + * "ports" and reduce their individual Queue Set allocations. + */ + BUG_ON(n < adapter->params.nports); + while (n < adapter->sge.ethqsets) + for_each_port(adapter, i) { + pi = adap2pinfo(adapter, i); + if (pi->nqsets > 1) { + pi->nqsets--; + adapter->sge.ethqsets--; + if (adapter->sge.ethqsets <= n) + break; + } + } + + /* + * Reassign the starting Queue Sets for each of the "ports" ... + */ + n = 0; + for_each_port(adapter, i) { + pi = adap2pinfo(adapter, i); + pi->first_qset = n; + n += pi->nqsets; + } +} + +/* + * We need to grab enough MSI-X vectors to cover our interrupt needs. Ideally + * we get a separate MSI-X vector for every "Queue Set" plus any extras we + * need. Minimally we need one for every Virtual Interface plus those needed + * for our "extras". Note that this process may lower the maximum number of + * allowed Queue Sets ... + */ +static int __devinit enable_msix(struct adapter *adapter) +{ + int i, err, want, need; + struct msix_entry entries[MSIX_ENTRIES]; + struct sge *s = &adapter->sge; + + for (i = 0; i < MSIX_ENTRIES; ++i) + entries[i].entry = i; + + /* + * We _want_ enough MSI-X interrupts to cover all of our "Queue Sets" + * plus those needed for our "extras" (for example, the firmware + * message queue). We _need_ at least one "Queue Set" per Virtual + * Interface plus those needed for our "extras". So now we get to see + * if the song is right ... + */ + want = s->max_ethqsets + MSIX_EXTRAS; + need = adapter->params.nports + MSIX_EXTRAS; + while ((err = pci_enable_msix(adapter->pdev, entries, want)) >= need) + want = err; + + if (err == 0) { + int nqsets = want - MSIX_EXTRAS; + if (nqsets < s->max_ethqsets) { + dev_warn(adapter->pdev_dev, "only enough MSI-X vectors" + " for %d Queue Sets\n", nqsets); + s->max_ethqsets = nqsets; + if (nqsets < s->ethqsets) + reduce_ethqs(adapter, nqsets); + } + for (i = 0; i < want; ++i) + adapter->msix_info[i].vec = entries[i].vector; + } else if (err > 0) { + pci_disable_msix(adapter->pdev); + dev_info(adapter->pdev_dev, "only %d MSI-X vectors left," + " not using MSI-X\n", err); + } + return err; +} + +#ifdef HAVE_NET_DEVICE_OPS +static const struct net_device_ops cxgb4vf_netdev_ops = { + .ndo_open = cxgb4vf_open, + .ndo_stop = cxgb4vf_stop, + .ndo_start_xmit = t4vf_eth_xmit, + .ndo_get_stats = cxgb4vf_get_stats, + .ndo_set_rx_mode = cxgb4vf_set_rxmode, + .ndo_set_mac_address = cxgb4vf_set_mac_addr, + .ndo_select_queue = cxgb4vf_select_queue, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = cxgb4vf_do_ioctl, + .ndo_change_mtu = cxgb4vf_change_mtu, + .ndo_vlan_rx_register = cxgb4vf_vlan_rx_register, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = cxgb4vf_poll_controller, +#endif +}; +#endif + +/* + * "Probe" a device: initialize a device and construct all kernel and driver + * state needed to manage the device. This routine is called "init_one" in + * the PF Driver ... + */ +static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + static int version_printed; + + int pci_using_dac; + int err, pidx; + unsigned int pmask; + struct adapter *adapter; + struct port_info *pi; + struct net_device *netdev; + + /* + * Vet our module parameters. + */ + if (msi != MSI_MSIX && msi != MSI_MSI) { + dev_err(&pdev->dev, "bad module parameter msi=%d; must be %d" + " (MSI-X or MSI) or %d (MSI)\n", msi, MSI_MSIX, + MSI_MSI); + err = -EINVAL; + goto err_out; + } + + /* + * Print our driver banner the first time we're called to initialize a + * device. + */ + if (version_printed == 0) { + printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION); + version_printed = 1; + } + + + /* + * Initialize generic PCI device state. + */ + err = pci_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "cannot enable PCI device\n"); + return err; + } + + /* + * Reserve PCI resources for the device. If we can't get them some + * other driver may have already claimed the device ... + */ + err = pci_request_regions(pdev, KBUILD_MODNAME); + if (err) { + dev_err(&pdev->dev, "cannot obtain PCI resources\n"); + goto err_disable_device; + } + + /* + * Set up our DMA mask: try for 64-bit address masking first and + * fall back to 32-bit if we can't get 64 bits ... + */ + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err == 0) { + err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); + if (err) { + dev_err(&pdev->dev, "unable to obtain 64-bit DMA for" + " coherent allocations\n"); + goto err_release_regions; + } + pci_using_dac = 1; + } else { + err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); + if (err != 0) { + dev_err(&pdev->dev, "no usable DMA configuration\n"); + goto err_release_regions; + } + pci_using_dac = 0; + } + + /* + * Enable bus mastering for the device ... + */ + pci_set_master(pdev); + + /* + * Allocate our adapter data structure and attach it to the device. + */ + adapter = kzalloc(sizeof(*adapter), GFP_KERNEL); + if (!adapter) { + err = -ENOMEM; + goto err_release_regions; + } + pci_set_drvdata(pdev, adapter); + adapter->pdev = pdev; + adapter->pdev_dev = &pdev->dev; + + /* + * Initialize SMP data synchronization resources. + */ + spin_lock_init(&adapter->stats_lock); + + /* + * Map our I/O registers in BAR0. + */ + adapter->regs = pci_ioremap_bar(pdev, 0); + if (!adapter->regs) { + dev_err(&pdev->dev, "cannot map device registers\n"); + err = -ENOMEM; + goto err_free_adapter; + } + + /* + * Initialize adapter level features. + */ + adapter->name = pci_name(pdev); + adapter->msg_enable = dflt_msg_enable; + err = adap_init0(adapter); + if (err) + goto err_unmap_bar; + + /* + * Allocate our "adapter ports" and stitch everything together. + */ + pmask = adapter->params.vfres.pmask; + for_each_port(adapter, pidx) { + int port_id, viid; + + /* + * We simplistically allocate our virtual interfaces + * sequentially across the port numbers to which we have + * access rights. This should be configurable in some manner + * ... + */ + if (pmask == 0) + break; + port_id = ffs(pmask) - 1; + pmask &= ~(1 << port_id); + viid = t4vf_alloc_vi(adapter, port_id); + if (viid < 0) { + dev_err(&pdev->dev, "cannot allocate VI for port %d:" + " err=%d\n", port_id, viid); + err = viid; + goto err_free_dev; + } + + /* + * Allocate our network device and stitch things together. + */ + netdev = alloc_etherdev_mq(sizeof(struct port_info), + MAX_PORT_QSETS); + if (netdev == NULL) { + dev_err(&pdev->dev, "cannot allocate netdev for" + " port %d\n", port_id); + t4vf_free_vi(adapter, viid); + err = -ENOMEM; + goto err_free_dev; + } + adapter->port[pidx] = netdev; + SET_NETDEV_DEV(netdev, &pdev->dev); + pi = netdev_priv(netdev); + pi->adapter = adapter; + pi->pidx = pidx; + pi->port_id = port_id; + pi->viid = viid; + + /* + * Initialize the starting state of our "port" and register + * it. + */ + pi->xact_addr_filt = -1; + pi->rx_offload = RX_CSO; + netif_carrier_off(netdev); + netif_tx_stop_all_queues(netdev); + netdev->irq = pdev->irq; + + netdev->features = (NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | + NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | + NETIF_F_GRO); + if (pci_using_dac) + netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features = + (netdev->features & + ~(NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX)); + +#ifdef HAVE_NET_DEVICE_OPS + netdev->netdev_ops = &cxgb4vf_netdev_ops; +#else + netdev->vlan_rx_register = cxgb4vf_vlan_rx_register; + netdev->open = cxgb4vf_open; + netdev->stop = cxgb4vf_stop; + netdev->hard_start_xmit = t4vf_eth_xmit; + netdev->get_stats = cxgb4vf_get_stats; + netdev->set_rx_mode = cxgb4vf_set_rxmode; + netdev->do_ioctl = cxgb4vf_do_ioctl; + netdev->change_mtu = cxgb4vf_change_mtu; + netdev->set_mac_address = cxgb4vf_set_mac_addr; + netdev->select_queue = cxgb4vf_select_queue; +#ifdef CONFIG_NET_POLL_CONTROLLER + netdev->poll_controller = cxgb4vf_poll_controller; +#endif +#endif + SET_ETHTOOL_OPS(netdev, &cxgb4vf_ethtool_ops); + + /* + * Initialize the hardware/software state for the port. + */ + err = t4vf_port_init(adapter, pidx); + if (err) { + dev_err(&pdev->dev, "cannot initialize port %d\n", + pidx); + goto err_free_dev; + } + } + + /* + * The "card" is now ready to go. If any errors occur during device + * registration we do not fail the whole "card" but rather proceed + * only with the ports we manage to register successfully. However we + * must register at least one net device. + */ + for_each_port(adapter, pidx) { + netdev = adapter->port[pidx]; + if (netdev == NULL) + continue; + + err = register_netdev(netdev); + if (err) { + dev_warn(&pdev->dev, "cannot register net device %s," + " skipping\n", netdev->name); + continue; + } + + set_bit(pidx, &adapter->registered_device_map); + } + if (adapter->registered_device_map == 0) { + dev_err(&pdev->dev, "could not register any net devices\n"); + goto err_free_dev; + } + + /* + * Set up our debugfs entries. + */ + if (cxgb4vf_debugfs_root) { + adapter->debugfs_root = + debugfs_create_dir(pci_name(pdev), + cxgb4vf_debugfs_root); + if (adapter->debugfs_root == NULL) + dev_warn(&pdev->dev, "could not create debugfs" + " directory"); + else + setup_debugfs(adapter); + } + + /* + * See what interrupts we'll be using. If we've been configured to + * use MSI-X interrupts, try to enable them but fall back to using + * MSI interrupts if we can't enable MSI-X interrupts. If we can't + * get MSI interrupts we bail with the error. + */ + if (msi == MSI_MSIX && enable_msix(adapter) == 0) + adapter->flags |= USING_MSIX; + else { + err = pci_enable_msi(pdev); + if (err) { + dev_err(&pdev->dev, "Unable to allocate %s interrupts;" + " err=%d\n", + msi == MSI_MSIX ? "MSI-X or MSI" : "MSI", err); + goto err_free_debugfs; + } + adapter->flags |= USING_MSI; + } + + /* + * Now that we know how many "ports" we have and what their types are, + * and how many Queue Sets we can support, we can configure our queue + * resources. + */ + cfg_queues(adapter); + + /* + * Print a short notice on the existance and configuration of the new + * VF network device ... + */ + for_each_port(adapter, pidx) { + dev_info(adapter->pdev_dev, "%s: Chelsio VF NIC PCIe %s\n", + adapter->port[pidx]->name, + (adapter->flags & USING_MSIX) ? "MSI-X" : + (adapter->flags & USING_MSI) ? "MSI" : ""); + } + + /* + * Return success! + */ + return 0; + + /* + * Error recovery and exit code. Unwind state that's been created + * so far and return the error. + */ + +err_free_debugfs: + if (adapter->debugfs_root) { + cleanup_debugfs(adapter); + debugfs_remove_recursive(adapter->debugfs_root); + } + +err_free_dev: + for_each_port(adapter, pidx) { + netdev = adapter->port[pidx]; + if (netdev == NULL) + continue; + pi = netdev_priv(netdev); + t4vf_free_vi(adapter, pi->viid); + if (test_bit(pidx, &adapter->registered_device_map)) + unregister_netdev(netdev); + free_netdev(netdev); + } + +err_unmap_bar: + iounmap(adapter->regs); + +err_free_adapter: + kfree(adapter); + pci_set_drvdata(pdev, NULL); + +err_release_regions: + pci_release_regions(pdev); + pci_set_drvdata(pdev, NULL); + pci_clear_master(pdev); + +err_disable_device: + pci_disable_device(pdev); + +err_out: + return err; +} + +/* + * "Remove" a device: tear down all kernel and driver state created in the + * "probe" routine and quiesce the device (disable interrupts, etc.). (Note + * that this is called "remove_one" in the PF Driver.) + */ +static void __devexit cxgb4vf_pci_remove(struct pci_dev *pdev) +{ + struct adapter *adapter = pci_get_drvdata(pdev); + + /* + * Tear down driver state associated with device. + */ + if (adapter) { + int pidx; + + /* + * Stop all of our activity. Unregister network port, + * disable interrupts, etc. + */ + for_each_port(adapter, pidx) + if (test_bit(pidx, &adapter->registered_device_map)) + unregister_netdev(adapter->port[pidx]); + t4vf_sge_stop(adapter); + if (adapter->flags & USING_MSIX) { + pci_disable_msix(adapter->pdev); + adapter->flags &= ~USING_MSIX; + } else if (adapter->flags & USING_MSI) { + pci_disable_msi(adapter->pdev); + adapter->flags &= ~USING_MSI; + } + + /* + * Tear down our debugfs entries. + */ + if (adapter->debugfs_root) { + cleanup_debugfs(adapter); + debugfs_remove_recursive(adapter->debugfs_root); + } + + /* + * Free all of the various resources which we've acquired ... + */ + t4vf_free_sge_resources(adapter); + for_each_port(adapter, pidx) { + struct net_device *netdev = adapter->port[pidx]; + struct port_info *pi; + + if (netdev == NULL) + continue; + + pi = netdev_priv(netdev); + t4vf_free_vi(adapter, pi->viid); + free_netdev(netdev); + } + iounmap(adapter->regs); + kfree(adapter); + pci_set_drvdata(pdev, NULL); + } + + /* + * Disable the device and release its PCI resources. + */ + pci_disable_device(pdev); + pci_clear_master(pdev); + pci_release_regions(pdev); +} + +/* + * PCI Device registration data structures. + */ +#define CH_DEVICE(devid, idx) \ + { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, PCI_ANY_ID, 0, 0, idx } + +static struct pci_device_id cxgb4vf_pci_tbl[] = { + CH_DEVICE(0xb000, 0), /* PE10K FPGA */ + CH_DEVICE(0x4800, 0), /* T440-dbg */ + CH_DEVICE(0x4801, 0), /* T420-cr */ + CH_DEVICE(0x4802, 0), /* T422-cr */ + { 0, } +}; + +MODULE_DESCRIPTION(DRV_DESC); +MODULE_AUTHOR("Chelsio Communications"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_DEVICE_TABLE(pci, cxgb4vf_pci_tbl); + +static struct pci_driver cxgb4vf_driver = { + .name = KBUILD_MODNAME, + .id_table = cxgb4vf_pci_tbl, + .probe = cxgb4vf_pci_probe, + .remove = __devexit_p(cxgb4vf_pci_remove), +}; + +/* + * Initialize global driver state. + */ +static int __init cxgb4vf_module_init(void) +{ + int ret; + + /* Debugfs support is optional, just warn if this fails */ + cxgb4vf_debugfs_root = debugfs_create_dir(KBUILD_MODNAME, NULL); + if (!cxgb4vf_debugfs_root) + printk(KERN_WARNING KBUILD_MODNAME ": could not create" + " debugfs entry, continuing\n"); + + ret = pci_register_driver(&cxgb4vf_driver); + if (ret < 0) + debugfs_remove(cxgb4vf_debugfs_root); + return ret; +} + +/* + * Tear down global driver state. + */ +static void __exit cxgb4vf_module_exit(void) +{ + pci_unregister_driver(&cxgb4vf_driver); + debugfs_remove(cxgb4vf_debugfs_root); +} + +module_init(cxgb4vf_module_init); +module_exit(cxgb4vf_module_exit); |