diff options
Diffstat (limited to 'drivers/net/e100.c')
| -rw-r--r-- | drivers/net/e100.c | 115 |
1 files changed, 84 insertions, 31 deletions
diff --git a/drivers/net/e100.c b/drivers/net/e100.c index fbf1c06ec5c..22cd0455670 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -156,7 +156,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.4.14-k2"DRV_EXT +#define DRV_VERSION "3.4.14-k4"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " @@ -1179,40 +1179,91 @@ static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb) }, *opts; /* *INDENT-ON* */ +/************************************************************************* +* CPUSaver parameters +* +* All CPUSaver parameters are 16-bit literals that are part of a +* "move immediate value" instruction. By changing the value of +* the literal in the instruction before the code is loaded, the +* driver can change the algorithm. +* +* INTDELAY - This loads the dead-man timer with its inital value. +* When this timer expires the interrupt is asserted, and the +* timer is reset each time a new packet is received. (see +* BUNDLEMAX below to set the limit on number of chained packets) +* The current default is 0x600 or 1536. Experiments show that +* the value should probably stay within the 0x200 - 0x1000. +* +* BUNDLEMAX - +* This sets the maximum number of frames that will be bundled. In +* some situations, such as the TCP windowing algorithm, it may be +* better to limit the growth of the bundle size than let it go as +* high as it can, because that could cause too much added latency. +* The default is six, because this is the number of packets in the +* default TCP window size. A value of 1 would make CPUSaver indicate +* an interrupt for every frame received. If you do not want to put +* a limit on the bundle size, set this value to xFFFF. +* +* BUNDLESMALL - +* This contains a bit-mask describing the minimum size frame that +* will be bundled. The default masks the lower 7 bits, which means +* that any frame less than 128 bytes in length will not be bundled, +* but will instead immediately generate an interrupt. This does +* not affect the current bundle in any way. Any frame that is 128 +* bytes or large will be bundled normally. This feature is meant +* to provide immediate indication of ACK frames in a TCP environment. +* Customers were seeing poor performance when a machine with CPUSaver +* enabled was sending but not receiving. The delay introduced when +* the ACKs were received was enough to reduce total throughput, because +* the sender would sit idle until the ACK was finally seen. +* +* The current default is 0xFF80, which masks out the lower 7 bits. +* This means that any frame which is x7F (127) bytes or smaller +* will cause an immediate interrupt. Because this value must be a +* bit mask, there are only a few valid values that can be used. To +* turn this feature off, the driver can write the value xFFFF to the +* lower word of this instruction (in the same way that the other +* parameters are used). Likewise, a value of 0xF800 (2047) would +* cause an interrupt to be generated for every frame, because all +* standard Ethernet frames are <= 2047 bytes in length. +*************************************************************************/ + +/* if you wish to disable the ucode functionality, while maintaining the + * workarounds it provides, set the following defines to: + * BUNDLESMALL 0 + * BUNDLEMAX 1 + * INTDELAY 1 + */ #define BUNDLESMALL 1 -#define BUNDLEMAX 50 -#define INTDELAY 15000 - - opts = ucode_opts; +#define BUNDLEMAX (u16)6 +#define INTDELAY (u16)1536 /* 0x600 */ /* do not load u-code for ICH devices */ if (nic->flags & ich) - return; + goto noloaducode; /* Search for ucode match against h/w rev_id */ - while (opts->mac) { - if (nic->mac == opts->mac) { - int i; - u32 *ucode = opts->ucode; - - /* Insert user-tunable settings */ - ucode[opts->timer_dword] &= 0xFFFF0000; - ucode[opts->timer_dword] |= - (u16) INTDELAY; - ucode[opts->bundle_dword] &= 0xFFFF0000; - ucode[opts->bundle_dword] |= (u16) BUNDLEMAX; - ucode[opts->min_size_dword] &= 0xFFFF0000; - ucode[opts->min_size_dword] |= - (BUNDLESMALL) ? 0xFFFF : 0xFF80; - - for(i = 0; i < UCODE_SIZE; i++) - cb->u.ucode[i] = cpu_to_le32(ucode[i]); - cb->command = cpu_to_le16(cb_ucode); - return; - } - opts++; + for (opts = ucode_opts; opts->mac; opts++) { + int i; + u32 *ucode = opts->ucode; + if (nic->mac != opts->mac) + continue; + + /* Insert user-tunable settings */ + ucode[opts->timer_dword] &= 0xFFFF0000; + ucode[opts->timer_dword] |= INTDELAY; + ucode[opts->bundle_dword] &= 0xFFFF0000; + ucode[opts->bundle_dword] |= BUNDLEMAX; + ucode[opts->min_size_dword] &= 0xFFFF0000; + ucode[opts->min_size_dword] |= (BUNDLESMALL) ? 0xFFFF : 0xFF80; + + for (i = 0; i < UCODE_SIZE; i++) + cb->u.ucode[i] = cpu_to_le32(ucode[i]); + cb->command = cpu_to_le16(cb_ucode); + return; } +noloaducode: cb->command = cpu_to_le16(cb_nop); } @@ -1666,7 +1717,7 @@ static inline int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) if(pci_dma_mapping_error(rx->dma_addr)) { dev_kfree_skb_any(rx->skb); - rx->skb = 0; + rx->skb = NULL; rx->dma_addr = 0; return -ENOMEM; } @@ -1952,7 +2003,7 @@ static int e100_up(struct nic *nic) if((err = e100_hw_init(nic))) goto err_clean_cbs; e100_set_multicast_list(nic->netdev); - e100_start_receiver(nic, 0); + e100_start_receiver(nic, NULL); mod_timer(&nic->watchdog, jiffies); if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ, nic->netdev->name, nic->netdev))) @@ -2032,7 +2083,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, BMCR_LOOPBACK); - e100_start_receiver(nic, 0); + e100_start_receiver(nic, NULL); if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) { err = -ENOMEM; @@ -2389,6 +2440,7 @@ static struct ethtool_ops e100_ethtool_ops = { .phys_id = e100_phys_id, .get_stats_count = e100_get_stats_count, .get_ethtool_stats = e100_get_ethtool_stats, + .get_perm_addr = ethtool_op_get_perm_addr, }; static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) @@ -2539,7 +2591,8 @@ static int __devinit e100_probe(struct pci_dev *pdev, e100_phy_init(nic); memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN); - if(!is_valid_ether_addr(netdev->dev_addr)) { + memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN); + if(!is_valid_ether_addr(netdev->perm_addr)) { DPRINTK(PROBE, ERR, "Invalid MAC address from " "EEPROM, aborting.\n"); err = -EAGAIN; |