diff options
Diffstat (limited to 'drivers/net/e1000/e1000_hw.c')
-rw-r--r-- | drivers/net/e1000/e1000_hw.c | 1373 |
1 files changed, 602 insertions, 771 deletions
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 9a4b6cbddf2..9d6edf3e73f 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -42,48 +42,65 @@ static void e1000_release_software_semaphore(struct e1000_hw *hw); static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw); static s32 e1000_check_downshift(struct e1000_hw *hw); -static s32 e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity); +static s32 e1000_check_polarity(struct e1000_hw *hw, + e1000_rev_polarity *polarity); static void e1000_clear_hw_cntrs(struct e1000_hw *hw); static void e1000_clear_vfta(struct e1000_hw *hw); static s32 e1000_commit_shadow_ram(struct e1000_hw *hw); static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, - bool link_up); + bool link_up); static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw); static s32 e1000_detect_gig_phy(struct e1000_hw *hw); static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank); static s32 e1000_get_auto_rd_done(struct e1000_hw *hw); -static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, u16 *max_length); +static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, + u16 *max_length); static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw); static s32 e1000_get_software_flag(struct e1000_hw *hw); static s32 e1000_ich8_cycle_init(struct e1000_hw *hw); static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout); static s32 e1000_id_led_init(struct e1000_hw *hw); -static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, u32 cnf_base_addr, u32 cnf_size); +static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, + u32 cnf_base_addr, + u32 cnf_size); static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw); static void e1000_init_rx_addrs(struct e1000_hw *hw); static void e1000_initialize_hardware_bits(struct e1000_hw *hw); static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); static s32 e1000_mng_enable_host_if(struct e1000_hw *hw); -static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, u16 offset, u8 *sum); -static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr); +static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, + u16 offset, u8 *sum); +static s32 e1000_mng_write_cmd_header(struct e1000_hw* hw, + struct e1000_host_mng_command_header + *hdr); static s32 e1000_mng_write_commit(struct e1000_hw *hw); -static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); -static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); -static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, + struct e1000_phy_info *phy_info); +static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, + struct e1000_phy_info *phy_info); +static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); -static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, + struct e1000_phy_info *phy_info); static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data); -static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte); +static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, + u8 byte); static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte); static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data); -static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 *data); -static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, u16 data); -static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, + u16 *data); +static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, + u16 data); +static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); +static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data); static void e1000_release_software_flag(struct e1000_hw *hw); static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); @@ -101,23 +118,21 @@ static s32 e1000_config_mac_to_phy(struct e1000_hw *hw); static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl); static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl); static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, - u16 count); + u16 count); static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw); static s32 e1000_phy_reset_dsp(struct e1000_hw *hw); static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, - u16 offset, u16 words, - u16 *data); +static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw); static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd); static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd); -static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, - u16 count); +static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count); static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, - u16 phy_data); + u16 phy_data); static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw,u32 reg_addr, - u16 *phy_data); + u16 *phy_data); static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count); static s32 e1000_acquire_eeprom(struct e1000_hw *hw); static void e1000_release_eeprom(struct e1000_hw *hw); @@ -127,8 +142,7 @@ static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw); static s32 e1000_set_phy_mode(struct e1000_hw *hw); static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer); static u8 e1000_calculate_mng_checksum(char *buffer, u32 length); -static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, - u16 duplex); +static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex); static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw); /* IGP cable length table */ @@ -159,8 +173,7 @@ u16 e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static s32 -e1000_set_phy_type(struct e1000_hw *hw) +static s32 e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); @@ -210,8 +223,7 @@ e1000_set_phy_type(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static void -e1000_phy_init_script(struct e1000_hw *hw) +static void e1000_phy_init_script(struct e1000_hw *hw) { u32 ret_val; u16 phy_saved_data; @@ -306,8 +318,7 @@ e1000_phy_init_script(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_set_mac_type(struct e1000_hw *hw) +s32 e1000_set_mac_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_mac_type"); @@ -474,8 +485,7 @@ e1000_set_mac_type(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code * **************************************************************************/ -void -e1000_set_media_type(struct e1000_hw *hw) +void e1000_set_media_type(struct e1000_hw *hw) { u32 status; @@ -510,7 +520,7 @@ e1000_set_media_type(struct e1000_hw *hw) hw->media_type = e1000_media_type_copper; break; default: - status = E1000_READ_REG(hw, STATUS); + status = er32(STATUS); if (status & E1000_STATUS_TBIMODE) { hw->media_type = e1000_media_type_fiber; /* tbi_compatibility not valid on fiber */ @@ -528,8 +538,7 @@ e1000_set_media_type(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_reset_hw(struct e1000_hw *hw) +s32 e1000_reset_hw(struct e1000_hw *hw) { u32 ctrl; u32 ctrl_ext; @@ -559,15 +568,15 @@ e1000_reset_hw(struct e1000_hw *hw) /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, IMC, 0xffffffff); + ew32(IMC, 0xffffffff); /* Disable the Transmit and Receive units. Then delay to allow * any pending transactions to complete before we hit the MAC with * the global reset. */ - E1000_WRITE_REG(hw, RCTL, 0); - E1000_WRITE_REG(hw, TCTL, E1000_TCTL_PSP); - E1000_WRITE_FLUSH(hw); + ew32(RCTL, 0); + ew32(TCTL, E1000_TCTL_PSP); + E1000_WRITE_FLUSH(); /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */ hw->tbi_compatibility_on = false; @@ -577,11 +586,11 @@ e1000_reset_hw(struct e1000_hw *hw) */ msleep(10); - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Must reset the PHY before resetting the MAC */ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); + ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST)); msleep(5); } @@ -590,12 +599,12 @@ e1000_reset_hw(struct e1000_hw *hw) if (hw->mac_type == e1000_82573) { timeout = 10; - extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; do { - E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); - extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + ew32(EXTCNF_CTRL, extcnf_ctrl); + extcnf_ctrl = er32(EXTCNF_CTRL); if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) break; @@ -610,9 +619,9 @@ e1000_reset_hw(struct e1000_hw *hw) /* Workaround for ICH8 bit corruption issue in FIFO memory */ if (hw->mac_type == e1000_ich8lan) { /* Set Tx and Rx buffer allocation to 8k apiece. */ - E1000_WRITE_REG(hw, PBA, E1000_PBA_8K); + ew32(PBA, E1000_PBA_8K); /* Set Packet Buffer Size to 16k. */ - E1000_WRITE_REG(hw, PBS, E1000_PBS_16K); + ew32(PBS, E1000_PBS_16K); } /* Issue a global reset to the MAC. This will reset the chip's @@ -636,7 +645,7 @@ e1000_reset_hw(struct e1000_hw *hw) case e1000_82545_rev_3: case e1000_82546_rev_3: /* Reset is performed on a shadow of the control register */ - E1000_WRITE_REG(hw, CTRL_DUP, (ctrl | E1000_CTRL_RST)); + ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST)); break; case e1000_ich8lan: if (!hw->phy_reset_disable && @@ -649,11 +658,11 @@ e1000_reset_hw(struct e1000_hw *hw) } e1000_get_software_flag(hw); - E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); + ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(5); break; default: - E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_RST)); + ew32(CTRL, (ctrl | E1000_CTRL_RST)); break; } @@ -668,10 +677,10 @@ e1000_reset_hw(struct e1000_hw *hw) case e1000_82544: /* Wait for reset to complete */ udelay(10); - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); /* Wait for EEPROM reload */ msleep(2); break; @@ -685,10 +694,10 @@ e1000_reset_hw(struct e1000_hw *hw) case e1000_82573: if (!e1000_is_onboard_nvm_eeprom(hw)) { udelay(10); - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); } /* fall through */ default: @@ -701,27 +710,27 @@ e1000_reset_hw(struct e1000_hw *hw) /* Disable HW ARPs on ASF enabled adapters */ if (hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { - manc = E1000_READ_REG(hw, MANC); + manc = er32(MANC); manc &= ~(E1000_MANC_ARP_EN); - E1000_WRITE_REG(hw, MANC, manc); + ew32(MANC, manc); } if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { e1000_phy_init_script(hw); /* Configure activity LED after PHY reset */ - led_ctrl = E1000_READ_REG(hw, LEDCTL); + led_ctrl = er32(LEDCTL); led_ctrl &= IGP_ACTIVITY_LED_MASK; led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - E1000_WRITE_REG(hw, LEDCTL, led_ctrl); + ew32(LEDCTL, led_ctrl); } /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); - E1000_WRITE_REG(hw, IMC, 0xffffffff); + ew32(IMC, 0xffffffff); /* Clear any pending interrupt events. */ - icr = E1000_READ_REG(hw, ICR); + icr = er32(ICR); /* If MWI was previously enabled, reenable it. */ if (hw->mac_type == e1000_82542_rev2_0) { @@ -730,9 +739,9 @@ e1000_reset_hw(struct e1000_hw *hw) } if (hw->mac_type == e1000_ich8lan) { - u32 kab = E1000_READ_REG(hw, KABGTXD); + u32 kab = er32(KABGTXD); kab |= E1000_KABGTXD_BGSQLBIAS; - E1000_WRITE_REG(hw, KABGTXD, kab); + ew32(KABGTXD, kab); } return E1000_SUCCESS; @@ -747,8 +756,7 @@ e1000_reset_hw(struct e1000_hw *hw) * This function contains hardware limitation workarounds for PCI-E adapters * *****************************************************************************/ -static void -e1000_initialize_hardware_bits(struct e1000_hw *hw) +static void e1000_initialize_hardware_bits(struct e1000_hw *hw) { if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) { /* Settings common to all PCI-express silicon */ @@ -758,22 +766,22 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) u32 reg_txdctl, reg_txdctl1; /* link autonegotiation/sync workarounds */ - reg_tarc0 = E1000_READ_REG(hw, TARC0); + reg_tarc0 = er32(TARC0); reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); /* Enable not-done TX descriptor counting */ - reg_txdctl = E1000_READ_REG(hw, TXDCTL); + reg_txdctl = er32(TXDCTL); reg_txdctl |= E1000_TXDCTL_COUNT_DESC; - E1000_WRITE_REG(hw, TXDCTL, reg_txdctl); - reg_txdctl1 = E1000_READ_REG(hw, TXDCTL1); + ew32(TXDCTL, reg_txdctl); + reg_txdctl1 = er32(TXDCTL1); reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC; - E1000_WRITE_REG(hw, TXDCTL1, reg_txdctl1); + ew32(TXDCTL1, reg_txdctl1); switch (hw->mac_type) { case e1000_82571: case e1000_82572: /* Clear PHY TX compatible mode bits */ - reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tarc1 = er32(TARC1); reg_tarc1 &= ~((1 << 30)|(1 << 29)); /* link autonegotiation/sync workarounds */ @@ -783,25 +791,25 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24)); /* Multiple read bit is reversed polarity */ - reg_tctl = E1000_READ_REG(hw, TCTL); + reg_tctl = er32(TCTL); if (reg_tctl & E1000_TCTL_MULR) reg_tarc1 &= ~(1 << 28); else reg_tarc1 |= (1 << 28); - E1000_WRITE_REG(hw, TARC1, reg_tarc1); + ew32(TARC1, reg_tarc1); break; case e1000_82573: - reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext = er32(CTRL_EXT); reg_ctrl_ext &= ~(1 << 23); reg_ctrl_ext |= (1 << 22); /* TX byte count fix */ - reg_ctrl = E1000_READ_REG(hw, CTRL); + reg_ctrl = er32(CTRL); reg_ctrl &= ~(1 << 29); - E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); - E1000_WRITE_REG(hw, CTRL, reg_ctrl); + ew32(CTRL_EXT, reg_ctrl_ext); + ew32(CTRL, reg_ctrl); break; case e1000_80003es2lan: /* improve small packet performace for fiber/serdes */ @@ -811,14 +819,14 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) } /* Multiple read bit is reversed polarity */ - reg_tctl = E1000_READ_REG(hw, TCTL); - reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tctl = er32(TCTL); + reg_tarc1 = er32(TARC1); if (reg_tctl & E1000_TCTL_MULR) reg_tarc1 &= ~(1 << 28); else reg_tarc1 |= (1 << 28); - E1000_WRITE_REG(hw, TARC1, reg_tarc1); + ew32(TARC1, reg_tarc1); break; case e1000_ich8lan: /* Reduce concurrent DMA requests to 3 from 4 */ @@ -827,16 +835,16 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) (hw->device_id != E1000_DEV_ID_ICH8_IGP_M))) reg_tarc0 |= ((1 << 29)|(1 << 28)); - reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext = er32(CTRL_EXT); reg_ctrl_ext |= (1 << 22); - E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); + ew32(CTRL_EXT, reg_ctrl_ext); /* workaround TX hang with TSO=on */ reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)); /* Multiple read bit is reversed polarity */ - reg_tctl = E1000_READ_REG(hw, TCTL); - reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tctl = er32(TCTL); + reg_tarc1 = er32(TARC1); if (reg_tctl & E1000_TCTL_MULR) reg_tarc1 &= ~(1 << 28); else @@ -845,13 +853,13 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) /* workaround TX hang with TSO=on */ reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24)); - E1000_WRITE_REG(hw, TARC1, reg_tarc1); + ew32(TARC1, reg_tarc1); break; default: break; } - E1000_WRITE_REG(hw, TARC0, reg_tarc0); + ew32(TARC0, reg_tarc0); } } @@ -866,8 +874,7 @@ e1000_initialize_hardware_bits(struct e1000_hw *hw) * configuration and flow control settings. Clears all on-chip counters. Leaves * the transmit and receive units disabled and uninitialized. *****************************************************************************/ -s32 -e1000_init_hw(struct e1000_hw *hw) +s32 e1000_init_hw(struct e1000_hw *hw) { u32 ctrl; u32 i; @@ -883,9 +890,9 @@ e1000_init_hw(struct e1000_hw *hw) ((hw->revision_id < 3) || ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) { - reg_data = E1000_READ_REG(hw, STATUS); + reg_data = er32(STATUS); reg_data &= ~0x80000000; - E1000_WRITE_REG(hw, STATUS, reg_data); + ew32(STATUS, reg_data); } /* Initialize Identification LED */ @@ -906,7 +913,7 @@ e1000_init_hw(struct e1000_hw *hw) /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */ if (hw->mac_type != e1000_ich8lan) { if (hw->mac_type < e1000_82545_rev_3) - E1000_WRITE_REG(hw, VET, 0); + ew32(VET, 0); e1000_clear_vfta(hw); } @@ -914,8 +921,8 @@ e1000_init_hw(struct e1000_hw *hw) if (hw->mac_type == e1000_82542_rev2_0) { DEBUGOUT("Disabling MWI on 82542 rev 2.0\n"); e1000_pci_clear_mwi(hw); - E1000_WRITE_REG(hw, RCTL, E1000_RCTL_RST); - E1000_WRITE_FLUSH(hw); + ew32(RCTL, E1000_RCTL_RST); + E1000_WRITE_FLUSH(); msleep(5); } @@ -926,8 +933,8 @@ e1000_init_hw(struct e1000_hw *hw) /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */ if (hw->mac_type == e1000_82542_rev2_0) { - E1000_WRITE_REG(hw, RCTL, 0); - E1000_WRITE_FLUSH(hw); + ew32(RCTL, 0); + E1000_WRITE_FLUSH(); msleep(1); if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE) e1000_pci_set_mwi(hw); @@ -942,7 +949,7 @@ e1000_init_hw(struct e1000_hw *hw) E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* use write flush to prevent Memory Write Block (MWB) from * occuring when accessing our register space */ - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } /* Set the PCI priority bit correctly in the CTRL register. This @@ -951,8 +958,8 @@ e1000_init_hw(struct e1000_hw *hw) * 82542 and 82543 silicon. */ if (hw->dma_fairness && hw->mac_type <= e1000_82543) { - ctrl = E1000_READ_REG(hw, CTRL); - E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR); + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_PRIOR); } switch (hw->mac_type) { @@ -975,9 +982,9 @@ e1000_init_hw(struct e1000_hw *hw) /* Set the transmit descriptor write-back policy */ if (hw->mac_type > e1000_82544) { - ctrl = E1000_READ_REG(hw, TXDCTL); + ctrl = er32(TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - E1000_WRITE_REG(hw, TXDCTL, ctrl); + ew32(TXDCTL, ctrl); } if (hw->mac_type == e1000_82573) { @@ -989,21 +996,21 @@ e1000_init_hw(struct e1000_hw *hw) break; case e1000_80003es2lan: /* Enable retransmit on late collisions */ - reg_data = E1000_READ_REG(hw, TCTL); + reg_data = er32(TCTL); reg_data |= E1000_TCTL_RTLC; - E1000_WRITE_REG(hw, TCTL, reg_data); + ew32(TCTL, reg_data); /* Configure Gigabit Carry Extend Padding */ - reg_data = E1000_READ_REG(hw, TCTL_EXT); + reg_data = er32(TCTL_EXT); reg_data &= ~E1000_TCTL_EXT_GCEX_MASK; reg_data |= DEFAULT_80003ES2LAN_TCTL_EXT_GCEX; - E1000_WRITE_REG(hw, TCTL_EXT, reg_data); + ew32(TCTL_EXT, reg_data); /* Configure Transmit Inter-Packet Gap */ - reg_data = E1000_READ_REG(hw, TIPG); + reg_data = er32(TIPG); reg_data &= ~E1000_TIPG_IPGT_MASK; reg_data |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; - E1000_WRITE_REG(hw, TIPG, reg_data); + ew32(TIPG, reg_data); reg_data = E1000_READ_REG_ARRAY(hw, FFLT, 0x0001); reg_data &= ~0x00100000; @@ -1012,17 +1019,17 @@ e1000_init_hw(struct e1000_hw *hw) case e1000_82571: case e1000_82572: case e1000_ich8lan: - ctrl = E1000_READ_REG(hw, TXDCTL1); + ctrl = er32(TXDCTL1); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - E1000_WRITE_REG(hw, TXDCTL1, ctrl); + ew32(TXDCTL1, ctrl); break; } if (hw->mac_type == e1000_82573) { - u32 gcr = E1000_READ_REG(hw, GCR); + u32 gcr = er32(GCR); gcr |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; - E1000_WRITE_REG(hw, GCR, gcr); + ew32(GCR, gcr); } /* Clear all of the statistics registers (clear on read). It is @@ -1039,11 +1046,11 @@ e1000_init_hw(struct e1000_hw *hw) if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER || hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) { - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); /* Relaxed ordering must be disabled to avoid a parity * error crash in a PCI slot. */ ctrl_ext |= E1000_CTRL_EXT_RO_DIS; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + ew32(CTRL_EXT, ctrl_ext); } return ret_val; @@ -1054,8 +1061,7 @@ e1000_init_hw(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code. *****************************************************************************/ -static s32 -e1000_adjust_serdes_amplitude(struct e1000_hw *hw) +static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw) { u16 eeprom_data; s32 ret_val; @@ -1100,8 +1106,7 @@ e1000_adjust_serdes_amplitude(struct e1000_hw *hw) * established. Assumes the hardware has previously been reset and the * transmitter and receiver are not enabled. *****************************************************************************/ -s32 -e1000_setup_link(struct e1000_hw *hw) +s32 e1000_setup_link(struct e1000_hw *hw) { u32 ctrl_ext; s32 ret_val; @@ -1176,7 +1181,7 @@ e1000_setup_link(struct e1000_hw *hw) } ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) << SWDPIO__EXT_SHIFT); - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + ew32(CTRL_EXT, ctrl_ext); } /* Call the necessary subroutine to configure the link. */ @@ -1193,12 +1198,12 @@ e1000_setup_link(struct e1000_hw *hw) /* FCAL/H and FCT are hardcoded to standard values in e1000_ich8lan. */ if (hw->mac_type != e1000_ich8lan) { - E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE); - E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH); - E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW); + ew32(FCT, FLOW_CONTROL_TYPE); + ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); + ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); } - E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time); + ew32(FCTTV, hw->fc_pause_time); /* Set the flow control receive threshold registers. Normally, * these registers will be set to a default threshold that may be @@ -1207,18 +1212,18 @@ e1000_setup_link(struct e1000_hw *hw) * registers will be set to 0. */ if (!(hw->fc & E1000_FC_TX_PAUSE)) { - E1000_WRITE_REG(hw, FCRTL, 0); - E1000_WRITE_REG(hw, FCRTH, 0); + ew32(FCRTL, 0); + ew32(FCRTH, 0); } else { /* We need to set up the Receive Threshold high and low water marks * as well as (optionally) enabling the transmission of XON frames. */ if (hw->fc_send_xon) { - E1000_WRITE_REG(hw, FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); - E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water); + ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE)); + ew32(FCRTH, hw->fc_high_water); } else { - E1000_WRITE_REG(hw, FCRTL, hw->fc_low_water); - E1000_WRITE_REG(hw, FCRTH, hw->fc_high_water); + ew32(FCRTL, hw->fc_low_water); + ew32(FCRTH, hw->fc_high_water); } } return ret_val; @@ -1233,8 +1238,7 @@ e1000_setup_link(struct e1000_hw *hw) * link. Assumes the hardware has been previously reset and the transmitter * and receiver are not enabled. *****************************************************************************/ -static s32 -e1000_setup_fiber_serdes_link(struct e1000_hw *hw) +static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw) { u32 ctrl; u32 status; @@ -1251,7 +1255,7 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * loopback mode is disabled during initialization. */ if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) - E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); + ew32(SCTL, E1000_DISABLE_SERDES_LOOPBACK); /* On adapters with a MAC newer than 82544, SWDP 1 will be * set when the optics detect a signal. On older adapters, it will be @@ -1259,7 +1263,7 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * If we're on serdes media, adjust the output amplitude to value * set in the EEPROM. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); if (hw->media_type == e1000_media_type_fiber) signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; @@ -1330,9 +1334,9 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) */ DEBUGOUT("Auto-negotiation enabled\n"); - E1000_WRITE_REG(hw, TXCW, txcw); - E1000_WRITE_REG(hw, CTRL, ctrl); - E1000_WRITE_FLUSH(hw); + ew32(TXCW, txcw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); hw->txcw = txcw; msleep(1); @@ -1344,11 +1348,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * For internal serdes, we just assume a signal is present, then poll. */ if (hw->media_type == e1000_media_type_internal_serdes || - (E1000_READ_REG(hw, CTRL) & E1000_CTRL_SWDPIN1) == signal) { + (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) { DEBUGOUT("Looking for Link\n"); for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) { msleep(10); - status = E1000_READ_REG(hw, STATUS); + status = er32(STATUS); if (status & E1000_STATUS_LU) break; } if (i == (LINK_UP_TIMEOUT / 10)) { @@ -1380,8 +1384,7 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_copper_link_preconfig(struct e1000_hw *hw) +static s32 e1000_copper_link_preconfig(struct e1000_hw *hw) { u32 ctrl; s32 ret_val; @@ -1389,7 +1392,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_preconfig"); - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* With 82543, we need to force speed and duplex on the MAC equal to what * the PHY speed and duplex configuration is. In addition, we need to * perform a hardware reset on the PHY to take it out of reset. @@ -1397,10 +1400,10 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) if (hw->mac_type > e1000_82543) { ctrl |= E1000_CTRL_SLU; ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); } else { ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); ret_val = e1000_phy_hw_reset(hw); if (ret_val) return ret_val; @@ -1440,8 +1443,7 @@ e1000_copper_link_preconfig(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *********************************************************************/ -static s32 -e1000_copper_link_igp_setup(struct e1000_hw *hw) +static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw) { u32 led_ctrl; s32 ret_val; @@ -1462,10 +1464,10 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) msleep(15); if (hw->mac_type != e1000_ich8lan) { /* Configure activity LED after PHY reset */ - led_ctrl = E1000_READ_REG(hw, LEDCTL); + led_ctrl = er32(LEDCTL); led_ctrl &= IGP_ACTIVITY_LED_MASK; led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - E1000_WRITE_REG(hw, LEDCTL, led_ctrl); + ew32(LEDCTL, led_ctrl); } /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */ @@ -1587,8 +1589,7 @@ e1000_copper_link_igp_setup(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *********************************************************************/ -static s32 -e1000_copper_link_ggp_setup(struct e1000_hw *hw) +static s32 e1000_copper_link_ggp_setup(struct e1000_hw *hw) { s32 ret_val; u16 phy_data; @@ -1679,9 +1680,9 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) if (ret_val) return ret_val; - reg_data = E1000_READ_REG(hw, CTRL_EXT); + reg_data = er32(CTRL_EXT); reg_data &= ~(E1000_CTRL_EXT_LINK_MODE_MASK); - E1000_WRITE_REG(hw, CTRL_EXT, reg_data); + ew32(CTRL_EXT, reg_data); ret_val = e1000_read_phy_reg(hw, GG82563_PHY_PWR_MGMT_CTRL, &phy_data); @@ -1735,8 +1736,7 @@ e1000_copper_link_ggp_setup(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *********************************************************************/ -static s32 -e1000_copper_link_mgp_setup(struct e1000_hw *hw) +static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw) { s32 ret_val; u16 phy_data; @@ -1839,8 +1839,7 @@ e1000_copper_link_mgp_setup(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *********************************************************************/ -static s32 -e1000_copper_link_autoneg(struct e1000_hw *hw) +static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) { s32 ret_val; u16 phy_data; @@ -1910,8 +1909,7 @@ e1000_copper_link_autoneg(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_copper_link_postconfig(struct e1000_hw *hw) +static s32 e1000_copper_link_postconfig(struct e1000_hw *hw) { s32 ret_val; DEBUGFUNC("e1000_copper_link_postconfig"); @@ -1948,8 +1946,7 @@ e1000_copper_link_postconfig(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_setup_copper_link(struct e1000_hw *hw) +static s32 e1000_setup_copper_link(struct e1000_hw *hw) { s32 ret_val; u16 i; @@ -2062,8 +2059,7 @@ e1000_setup_copper_link(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex) +static s32 e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex) { s32 ret_val = E1000_SUCCESS; u32 tipg; @@ -2078,10 +2074,10 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex) return ret_val; /* Configure Transmit Inter-Packet Gap */ - tipg = E1000_READ_REG(hw, TIPG); + tipg = er32(TIPG); tipg &= ~E1000_TIPG_IPGT_MASK; tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_10_100; - E1000_WRITE_REG(hw, TIPG, tipg); + ew32(TIPG, tipg); ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); @@ -2098,8 +2094,7 @@ e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, u16 duplex) return ret_val; } -static s32 -e1000_configure_kmrn_for_1000(struct e1000_hw *hw) +static s32 e1000_configure_kmrn_for_1000(struct e1000_hw *hw) { s32 ret_val = E1000_SUCCESS; u16 reg_data; @@ -2114,10 +2109,10 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw) return ret_val; /* Configure Transmit Inter-Packet Gap */ - tipg = E1000_READ_REG(hw, TIPG); + tipg = er32(TIPG); tipg &= ~E1000_TIPG_IPGT_MASK; tipg |= DEFAULT_80003ES2LAN_TIPG_IPGT_1000; - E1000_WRITE_REG(hw, TIPG, tipg); + ew32(TIPG, tipg); ret_val = e1000_read_phy_reg(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data); @@ -2135,8 +2130,7 @@ e1000_configure_kmrn_for_1000(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -s32 -e1000_phy_setup_autoneg(struct e1000_hw *hw) +s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) { s32 ret_val; u16 mii_autoneg_adv_reg; @@ -2284,8 +2278,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_phy_force_speed_duplex(struct e1000_hw *hw) +static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw) { u32 ctrl; s32 ret_val; @@ -2302,7 +2295,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) DEBUGOUT1("hw->fc = %d\n", hw->fc); /* Read the Device Control Register. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); @@ -2357,7 +2350,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) e1000_config_collision_dist(hw); /* Write the configured values back to the Device Control Reg. */ - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); if ((hw->phy_type == e1000_phy_m88) || (hw->phy_type == e1000_phy_gg82563)) { @@ -2535,8 +2528,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) * Link should have been established previously. Reads the speed and duplex * information from the Device Status register. ******************************************************************************/ -void -e1000_config_collision_dist(struct e1000_hw *hw) +void e1000_config_collision_dist(struct e1000_hw *hw) { u32 tctl, coll_dist; @@ -2547,13 +2539,13 @@ e1000_config_collision_dist(struct e1000_hw *hw) else coll_dist = E1000_COLLISION_DISTANCE; - tctl = E1000_READ_REG(hw, TCTL); + tctl = er32(TCTL); tctl &= ~E1000_TCTL_COLD; tctl |= coll_dist << E1000_COLD_SHIFT; - E1000_WRITE_REG(hw, TCTL, tctl); - E1000_WRITE_FLUSH(hw); + ew32(TCTL, tctl); + E1000_WRITE_FLUSH(); } /****************************************************************************** @@ -2565,8 +2557,7 @@ e1000_config_collision_dist(struct e1000_hw *hw) * The contents of the PHY register containing the needed information need to * be passed in. ******************************************************************************/ -static s32 -e1000_config_mac_to_phy(struct e1000_hw *hw) +static s32 e1000_config_mac_to_phy(struct e1000_hw *hw) { u32 ctrl; s32 ret_val; @@ -2582,7 +2573,7 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) /* Read the Device Control Register and set the bits to Force Speed * and Duplex. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS); @@ -2609,7 +2600,7 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) ctrl |= E1000_CTRL_SPD_100; /* Write the configured values back to the Device Control Reg. */ - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); return E1000_SUCCESS; } @@ -2624,15 +2615,14 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) * by the PHY rather than the MAC. Software must also configure these * bits when link is forced on a fiber connection. *****************************************************************************/ -s32 -e1000_force_mac_fc(struct e1000_hw *hw) +s32 e1000_force_mac_fc(struct e1000_hw *hw) { u32 ctrl; DEBUGFUNC("e1000_force_mac_fc"); /* Get the current configuration of the Device Control Register */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Because we didn't get link via the internal auto-negotiation * mechanism (we either forced link or we got link via PHY @@ -2676,7 +2666,7 @@ e1000_force_mac_fc(struct e1000_hw *hw) if (hw->mac_type == e1000_82542_rev2_0) ctrl &= (~E1000_CTRL_TFCE); - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); return E1000_SUCCESS; } @@ -2691,8 +2681,7 @@ e1000_force_mac_fc(struct e1000_hw *hw) * based on the flow control negotiated by the PHY. In TBI mode, the TFCE * and RFCE bits will be automaticaly set to the negotiated flow control mode. *****************************************************************************/ -static s32 -e1000_config_fc_after_link_up(struct e1000_hw *hw) +static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw) { s32 ret_val; u16 mii_status_reg; @@ -2896,8 +2885,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * * Called by any function that needs to check the link status of the adapter. *****************************************************************************/ -s32 -e1000_check_for_link(struct e1000_hw *hw) +s32 e1000_check_for_link(struct e1000_hw *hw) { u32 rxcw = 0; u32 ctrl; @@ -2910,8 +2898,8 @@ e1000_check_for_link(struct e1000_hw *hw) DEBUGFUNC("e1000_check_for_link"); - ctrl = E1000_READ_REG(hw, CTRL); - status = E1000_READ_REG(hw, STATUS); + ctrl = er32(CTRL); + status = er32(STATUS); /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be * set when the optics detect a signal. On older adapters, it will be @@ -2919,7 +2907,7 @@ e1000_check_for_link(struct e1000_hw *hw) */ if ((hw->media_type == e1000_media_type_fiber) || (hw->media_type == e1000_media_type_internal_serdes)) { - rxcw = E1000_READ_REG(hw, RXCW); + rxcw = er32(RXCW); if (hw->media_type == e1000_media_type_fiber) { signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0; @@ -2965,11 +2953,11 @@ e1000_check_for_link(struct e1000_hw *hw) (!hw->autoneg) && (hw->forced_speed_duplex == e1000_10_full || hw->forced_speed_duplex == e1000_10_half)) { - E1000_WRITE_REG(hw, IMC, 0xffffffff); + ew32(IMC, 0xffffffff); ret_val = e1000_polarity_reversal_workaround(hw); - icr = E1000_READ_REG(hw, ICR); - E1000_WRITE_REG(hw, ICS, (icr & ~E1000_ICS_LSC)); - E1000_WRITE_REG(hw, IMS, IMS_ENABLE_MASK); + icr = er32(ICR); + ew32(ICS, (icr & ~E1000_ICS_LSC)); + ew32(IMS, IMS_ENABLE_MASK); } } else { @@ -3034,9 +3022,9 @@ e1000_check_for_link(struct e1000_hw *hw) */ if (hw->tbi_compatibility_on) { /* If we previously were in the mode, turn it off. */ - rctl = E1000_READ_REG(hw, RCTL); + rctl = er32(RCTL); rctl &= ~E1000_RCTL_SBP; - E1000_WRITE_REG(hw, RCTL, rctl); + ew32(RCTL, rctl); hw->tbi_compatibility_on = false; } } else { @@ -3047,9 +3035,9 @@ e1000_check_for_link(struct e1000_hw *hw) */ if (!hw->tbi_compatibility_on) { hw->tbi_compatibility_on = true; - rctl = E1000_READ_REG(hw, RCTL); + rctl = er32(RCTL); rctl |= E1000_RCTL_SBP; - E1000_WRITE_REG(hw, RCTL, rctl); + ew32(RCTL, rctl); } } } @@ -3073,12 +3061,12 @@ e1000_check_for_link(struct e1000_hw *hw) DEBUGOUT("NOT RXing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ - E1000_WRITE_REG(hw, TXCW, (hw->txcw & ~E1000_TXCW_ANE)); + ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE)); /* Force link-up and also force full-duplex. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); /* Configure Flow Control after forcing link up. */ ret_val = e1000_config_fc_after_link_up(hw); @@ -3096,8 +3084,8 @@ e1000_check_for_link(struct e1000_hw *hw) (hw->media_type == e1000_media_type_internal_serdes)) && (ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { DEBUGOUT("RXing /C/, enable AutoNeg and stop forcing link.\n"); - E1000_WRITE_REG(hw, TXCW, hw->txcw); - E1000_WRITE_REG(hw, CTRL, (ctrl & ~E1000_CTRL_SLU)); + ew32(TXCW, hw->txcw); + ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); hw->serdes_link_down = false; } @@ -3105,10 +3093,10 @@ e1000_check_for_link(struct e1000_hw *hw) * based on MAC synchronization for internal serdes media type. */ else if ((hw->media_type == e1000_media_type_internal_serdes) && - !(E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) { + !(E1000_TXCW_ANE & er32(TXCW))) { /* SYNCH bit and IV bit are sticky. */ udelay(10); - if (E1000_RXCW_SYNCH & E1000_READ_REG(hw, RXCW)) { + if (E1000_RXCW_SYNCH & er32(RXCW)) { if (!(rxcw & E1000_RXCW_IV)) { hw->serdes_link_down = false; DEBUGOUT("SERDES: Link is up.\n"); @@ -3119,8 +3107,8 @@ e1000_check_for_link(struct e1000_hw *hw) } } if ((hw->media_type == e1000_media_type_internal_serdes) && - (E1000_TXCW_ANE & E1000_READ_REG(hw, TXCW))) { - hw->serdes_link_down = !(E1000_STATUS_LU & E1000_READ_REG(hw, STATUS)); + (E1000_TXCW_ANE & er32(TXCW))) { + hw->serdes_link_down = !(E1000_STATUS_LU & er32(STATUS)); } return E1000_SUCCESS; } @@ -3132,10 +3120,7 @@ e1000_check_for_link(struct e1000_hw *hw) * speed - Speed of the connection * duplex - Duplex setting of the connection *****************************************************************************/ -s32 -e1000_get_speed_and_duplex(struct e1000_hw *hw, - u16 *speed, - u16 *duplex) +s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) { u32 status; s32 ret_val; @@ -3144,7 +3129,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, DEBUGFUNC("e1000_get_speed_and_duplex"); if (hw->mac_type >= e1000_82543) { - status = E1000_READ_REG(hw, STATUS); + status = er32(STATUS); if (status & E1000_STATUS_SPEED_1000) { *speed = SPEED_1000; DEBUGOUT("1000 Mbs, "); @@ -3214,8 +3199,7 @@ e1000_get_speed_and_duplex(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_wait_autoneg(struct e1000_hw *hw) +static s32 e1000_wait_autoneg(struct e1000_hw *hw) { s32 ret_val; u16 i; @@ -3249,15 +3233,13 @@ e1000_wait_autoneg(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code * ctrl - Device control register's current value ******************************************************************************/ -static void -e1000_raise_mdi_clk(struct e1000_hw *hw, - u32 *ctrl) +static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { /* Raise the clock input to the Management Data Clock (by setting the MDC * bit), and then delay 10 microseconds. */ - E1000_WRITE_REG(hw, CTRL, (*ctrl | E1000_CTRL_MDC)); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, (*ctrl | E1000_CTRL_MDC)); + E1000_WRITE_FLUSH(); udelay(10); } @@ -3267,15 +3249,13 @@ e1000_raise_mdi_clk(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * ctrl - Device control register's current value ******************************************************************************/ -static void -e1000_lower_mdi_clk(struct e1000_hw *hw, - u32 *ctrl) +static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl) { /* Lower the clock input to the Management Data Clock (by clearing the MDC * bit), and then delay 10 microseconds. */ - E1000_WRITE_REG(hw, CTRL, (*ctrl & ~E1000_CTRL_MDC)); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC)); + E1000_WRITE_FLUSH(); udelay(10); } @@ -3288,10 +3268,7 @@ e1000_lower_mdi_clk(struct e1000_hw *hw, * * Bits are shifted out in MSB to LSB order. ******************************************************************************/ -static void -e1000_shift_out_mdi_bits(struct e1000_hw *hw, - u32 data, - u16 count) +static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count) { u32 ctrl; u32 mask; @@ -3303,7 +3280,7 @@ e1000_shift_out_mdi_bits(struct e1000_hw *hw, mask = 0x01; mask <<= (count - 1); - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR); @@ -3319,8 +3296,8 @@ e1000_shift_out_mdi_bits(struct e1000_hw *hw, else ctrl &= ~E1000_CTRL_MDIO; - E1000_WRITE_REG(hw, CTRL, ctrl); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); udelay(10); @@ -3338,8 +3315,7 @@ e1000_shift_out_mdi_bits(struct e1000_hw *hw, * * Bits are shifted in in MSB to LSB order. ******************************************************************************/ -static u16 -e1000_shift_in_mdi_bits(struct e1000_hw *hw) +static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw) { u32 ctrl; u16 data = 0; @@ -3352,14 +3328,14 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw) * by raising the input to the Management Data Clock (setting the MDC bit), * and then reading the value of the MDIO bit. */ - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */ ctrl &= ~E1000_CTRL_MDIO_DIR; ctrl &= ~E1000_CTRL_MDIO; - E1000_WRITE_REG(hw, CTRL, ctrl); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); /* Raise and Lower the clock before reading in the data. This accounts for * the turnaround bits. The first clock occurred when we clocked out the @@ -3371,7 +3347,7 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw) for (data = 0, i = 0; i < 16; i++) { data = data << 1; e1000_raise_mdi_clk(hw, &ctrl); - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); /* Check to see if we shifted in a "1". */ if (ctrl & E1000_CTRL_MDIO) data |= 1; @@ -3384,8 +3360,7 @@ e1000_shift_in_mdi_bits(struct e1000_hw *hw) return data; } -static s32 -e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask) +static s32 e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask) { u32 swfw_sync = 0; u32 swmask = mask; @@ -3404,7 +3379,7 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask) if (e1000_get_hw_eeprom_semaphore(hw)) return -E1000_ERR_SWFW_SYNC; - swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC); + swfw_sync = er32(SW_FW_SYNC); if (!(swfw_sync & (fwmask | swmask))) { break; } @@ -3422,14 +3397,13 @@ e1000_swfw_sync_acquire(struct e1000_hw *hw, u16 mask) } swfw_sync |= swmask; - E1000_WRITE_REG(hw, SW_FW_SYNC, swfw_sync); + ew32(SW_FW_SYNC, swfw_sync); e1000_put_hw_eeprom_semaphore(hw); return E1000_SUCCESS; } -static void -e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask) +static void e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask) { u32 swfw_sync; u32 swmask = mask; @@ -3451,9 +3425,9 @@ e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask) while (e1000_get_hw_eeprom_semaphore(hw) != E1000_SUCCESS); /* empty */ - swfw_sync = E1000_READ_REG(hw, SW_FW_SYNC); + swfw_sync = er32(SW_FW_SYNC); swfw_sync &= ~swmask; - E1000_WRITE_REG(hw, SW_FW_SYNC, swfw_sync); + ew32(SW_FW_SYNC, swfw_sync); e1000_put_hw_eeprom_semaphore(hw); } @@ -3464,10 +3438,7 @@ e1000_swfw_sync_release(struct e1000_hw *hw, u16 mask) * hw - Struct containing variables accessed by shared code * reg_addr - address of the PHY register to read ******************************************************************************/ -s32 -e1000_read_phy_reg(struct e1000_hw *hw, - u32 reg_addr, - u16 *phy_data) +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data) { u32 ret_val; u16 swfw; @@ -3475,7 +3446,7 @@ e1000_read_phy_reg(struct e1000_hw *hw, DEBUGFUNC("e1000_read_phy_reg"); if ((hw->mac_type == e1000_80003es2lan) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) { + (er32(STATUS) & E1000_STATUS_FUNC_1)) { swfw = E1000_SWFW_PHY1_SM; } else { swfw = E1000_SWFW_PHY0_SM; @@ -3523,9 +3494,8 @@ e1000_read_phy_reg(struct e1000_hw *hw, return ret_val; } -static s32 -e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, - u16 *phy_data) +static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, + u16 *phy_data) { u32 i; u32 mdic = 0; @@ -3547,12 +3517,12 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, (phy_addr << E1000_MDIC_PHY_SHIFT) | (E1000_MDIC_OP_READ)); - E1000_WRITE_REG(hw, MDIC, mdic); + ew32(MDIC, mdic); /* Poll the ready bit to see if the MDI read completed */ for (i = 0; i < 64; i++) { udelay(50); - mdic = E1000_READ_REG(hw, MDIC); + mdic = er32(MDIC); if (mdic & E1000_MDIC_READY) break; } if (!(mdic & E1000_MDIC_READY)) { @@ -3563,7 +3533,7 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, DEBUGOUT("MDI Error\n"); return -E1000_ERR_PHY; } - *phy_data = (u16) mdic; + *phy_data = (u16)mdic; } else { /* We must first send a preamble through the MDIO pin to signal the * beginning of an MII instruction. This is done by sending 32 @@ -3603,9 +3573,7 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, * reg_addr - address of the PHY register to write * data - data to write to the PHY ******************************************************************************/ -s32 -e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, - u16 phy_data) +s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data) { u32 ret_val; u16 swfw; @@ -3613,7 +3581,7 @@ e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, DEBUGFUNC("e1000_write_phy_reg"); if ((hw->mac_type == e1000_80003es2lan) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) { + (er32(STATUS) & E1000_STATUS_FUNC_1)) { swfw = E1000_SWFW_PHY1_SM; } else { swfw = E1000_SWFW_PHY0_SM; @@ -3661,9 +3629,8 @@ e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, return ret_val; } -static s32 -e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, - u16 phy_data) +static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, + u16 phy_data) { u32 i; u32 mdic = 0; @@ -3681,17 +3648,17 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, * for the PHY register in the MDI Control register. The MAC will take * care of interfacing with the PHY to send the desired data. */ - mdic = (((u32) phy_data) | + mdic = (((u32)phy_data) | (reg_addr << E1000_MDIC_REG_SHIFT) | (phy_addr << E1000_MDIC_PHY_SHIFT) | (E1000_MDIC_OP_WRITE)); - E1000_WRITE_REG(hw, MDIC, mdic); + ew32(MDIC, mdic); /* Poll the ready bit to see if the MDI read completed */ for (i = 0; i < 641; i++) { udelay(5); - mdic = E1000_READ_REG(hw, MDIC); + mdic = er32(MDIC); if (mdic & E1000_MDIC_READY) break; } if (!(mdic & E1000_MDIC_READY)) { @@ -3715,7 +3682,7 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) | (PHY_OP_WRITE << 12) | (PHY_SOF << 14)); mdic <<= 16; - mdic |= (u32) phy_data; + mdic |= (u32)phy_data; e1000_shift_out_mdi_bits(hw, mdic, 32); } @@ -3723,17 +3690,14 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr, return E1000_SUCCESS; } -static s32 -e1000_read_kmrn_reg(struct e1000_hw *hw, - u32 reg_addr, - u16 *data) +static s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 *data) { u32 reg_val; u16 swfw; DEBUGFUNC("e1000_read_kmrn_reg"); if ((hw->mac_type == e1000_80003es2lan) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) { + (er32(STATUS) & E1000_STATUS_FUNC_1)) { swfw = E1000_SWFW_PHY1_SM; } else { swfw = E1000_SWFW_PHY0_SM; @@ -3745,28 +3709,25 @@ e1000_read_kmrn_reg(struct e1000_hw *hw, reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) & E1000_KUMCTRLSTA_OFFSET) | E1000_KUMCTRLSTA_REN; - E1000_WRITE_REG(hw, KUMCTRLSTA, reg_val); + ew32(KUMCTRLSTA, reg_val); udelay(2); /* Read the data returned */ - reg_val = E1000_READ_REG(hw, KUMCTRLSTA); + reg_val = er32(KUMCTRLSTA); *data = (u16)reg_val; e1000_swfw_sync_release(hw, swfw); return E1000_SUCCESS; } -static s32 -e1000_write_kmrn_reg(struct e1000_hw *hw, - u32 reg_addr, - u16 data) +static s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 reg_addr, u16 data) { u32 reg_val; u16 swfw; DEBUGFUNC("e1000_write_kmrn_reg"); if ((hw->mac_type == e1000_80003es2lan) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) { + (er32(STATUS) & E1000_STATUS_FUNC_1)) { swfw = E1000_SWFW_PHY1_SM; } else { swfw = E1000_SWFW_PHY0_SM; @@ -3776,7 +3737,7 @@ e1000_write_kmrn_reg(struct e1000_hw *hw, reg_val = ((reg_addr << E1000_KUMCTRLSTA_OFFSET_SHIFT) & E1000_KUMCTRLSTA_OFFSET) | data; - E1000_WRITE_REG(hw, KUMCTRLSTA, reg_val); + ew32(KUMCTRLSTA, reg_val); udelay(2); e1000_swfw_sync_release(hw, swfw); @@ -3788,8 +3749,7 @@ e1000_write_kmrn_reg(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -s32 -e1000_phy_hw_reset(struct e1000_hw *hw) +s32 e1000_phy_hw_reset(struct e1000_hw *hw) { u32 ctrl, ctrl_ext; u32 led_ctrl; @@ -3808,7 +3768,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) if (hw->mac_type > e1000_82543) { if ((hw->mac_type == e1000_80003es2lan) && - (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1)) { + (er32(STATUS) & E1000_STATUS_FUNC_1)) { swfw = E1000_SWFW_PHY1_SM; } else { swfw = E1000_SWFW_PHY0_SM; @@ -3823,17 +3783,17 @@ e1000_phy_hw_reset(struct e1000_hw *hw) * and deassert. For e1000_82571 hardware and later, we instead delay * for 50us between and 10ms after the deassertion. */ - ctrl = E1000_READ_REG(hw, CTRL); - E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PHY_RST); - E1000_WRITE_FLUSH(hw); + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_PHY_RST); + E1000_WRITE_FLUSH(); if (hw->mac_type < e1000_82571) msleep(10); else udelay(100); - E1000_WRITE_REG(hw, CTRL, ctrl); - E1000_WRITE_FLUSH(hw); + ew32(CTRL, ctrl); + E1000_WRITE_FLUSH(); if (hw->mac_type >= e1000_82571) mdelay(10); @@ -3843,24 +3803,24 @@ e1000_phy_hw_reset(struct e1000_hw *hw) /* Read the Extended Device Control Register, assert the PHY_RESET_DIR * bit to put the PHY into reset. Then, take it out of reset. */ - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR; ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); msleep(10); ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_FLUSH(hw); + ew32(CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(); } udelay(150); if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { /* Configure activity LED after PHY reset */ - led_ctrl = E1000_READ_REG(hw, LEDCTL); + led_ctrl = er32(LEDCTL); led_ctrl &= IGP_ACTIVITY_LED_MASK; led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - E1000_WRITE_REG(hw, LEDCTL, led_ctrl); + ew32(LEDCTL, led_ctrl); } /* Wait for FW to finish PHY configuration. */ @@ -3882,8 +3842,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) * * Sets bit 15 of the MII Control register ******************************************************************************/ -s32 -e1000_phy_reset(struct e1000_hw *hw) +s32 e1000_phy_reset(struct e1000_hw *hw) { s32 ret_val; u16 phy_data; @@ -3934,8 +3893,7 @@ e1000_phy_reset(struct e1000_hw *hw) * * hw - struct containing variables accessed by shared code ******************************************************************************/ -void -e1000_phy_powerdown_workaround(struct e1000_hw *hw) +void e1000_phy_powerdown_workaround(struct e1000_hw *hw) { s32 reg; u16 phy_data; @@ -3948,8 +3906,8 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw) do { /* Disable link */ - reg = E1000_READ_REG(hw, PHY_CTRL); - E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | + reg = er32(PHY_CTRL); + ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | E1000_PHY_CTRL_NOND0A_GBE_DISABLE); /* Write VR power-down enable - bits 9:8 should be 10b */ @@ -3964,8 +3922,8 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw) break; /* Issue PHY reset and repeat at most one more time */ - reg = E1000_READ_REG(hw, CTRL); - E1000_WRITE_REG(hw, CTRL, reg | E1000_CTRL_PHY_RST); + reg = er32(CTRL); + ew32(CTRL, reg | E1000_CTRL_PHY_RST); retry++; } while (retry); @@ -3987,8 +3945,7 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw) * * hw - struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) +static s32 e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) { s32 ret_val; s32 reg; @@ -4024,8 +3981,8 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) mdelay(5); } /* Disable GigE link negotiation */ - reg = E1000_READ_REG(hw, PHY_CTRL); - E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | + reg = er32(PHY_CTRL); + ew32(PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | E1000_PHY_CTRL_NOND0A_GBE_DISABLE); /* unable to acquire PCS lock */ @@ -4040,8 +3997,7 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_detect_gig_phy(struct e1000_hw *hw) +static s32 e1000_detect_gig_phy(struct e1000_hw *hw) { s32 phy_init_status, ret_val; u16 phy_id_high, phy_id_low; @@ -4076,14 +4032,14 @@ e1000_detect_gig_phy(struct e1000_hw *hw) if (ret_val) return ret_val; - hw->phy_id = (u32) (phy_id_high << 16); + hw->phy_id = (u32)(phy_id_high << 16); udelay(20); ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low); if (ret_val) return ret_val; - hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK); - hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK; + hw->phy_id |= (u32)(phy_id_low & PHY_REVISION_MASK); + hw->phy_revision = (u32)phy_id_low & ~PHY_REVISION_MASK; switch (hw->mac_type) { case e1000_82543: @@ -4136,8 +4092,7 @@ e1000_detect_gig_phy(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -static s32 -e1000_phy_reset_dsp(struct e1000_hw *hw) +static s32 e1000_phy_reset_dsp(struct e1000_hw *hw) { s32 ret_val; DEBUGFUNC("e1000_phy_reset_dsp"); @@ -4163,9 +4118,8 @@ e1000_phy_reset_dsp(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code * phy_info - PHY information structure ******************************************************************************/ -static s32 -e1000_phy_igp_get_info(struct e1000_hw *hw, - struct e1000_phy_info *phy_info) +static s32 e1000_phy_igp_get_info(struct e1000_hw *hw, + struct e1000_phy_info *phy_info) { s32 ret_val; u16 phy_data, min_length, max_length, average; @@ -4240,9 +4194,8 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * phy_info - PHY information structure ******************************************************************************/ -static s32 -e1000_phy_ife_get_info(struct e1000_hw *hw, - struct e1000_phy_info *phy_info) +static s32 e1000_phy_ife_get_info(struct e1000_hw *hw, + struct e1000_phy_info *phy_info) { s32 ret_val; u16 phy_data; @@ -4290,9 +4243,8 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * phy_info - PHY information structure ******************************************************************************/ -static s32 -e1000_phy_m88_get_info(struct e1000_hw *hw, - struct e1000_phy_info *phy_info) +static s32 e1000_phy_m88_get_info(struct e1000_hw *hw, + struct e1000_phy_info *phy_info) { s32 ret_val; u16 phy_data; @@ -4369,9 +4321,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * phy_info - PHY information structure ******************************************************************************/ -s32 -e1000_phy_get_info(struct e1000_hw *hw, - struct e1000_phy_info *phy_info) +s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { s32 ret_val; u16 phy_data; @@ -4415,8 +4365,7 @@ e1000_phy_get_info(struct e1000_hw *hw, return e1000_phy_m88_get_info(hw, phy_info); } -s32 -e1000_validate_mdi_setting(struct e1000_hw *hw) +s32 e1000_validate_mdi_setting(struct e1000_hw *hw) { DEBUGFUNC("e1000_validate_mdi_settings"); @@ -4436,11 +4385,10 @@ e1000_validate_mdi_setting(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_init_eeprom_params(struct e1000_hw *hw) +s32 e1000_init_eeprom_params(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; - u32 eecd = E1000_READ_REG(hw, EECD); + u32 eecd = er32(EECD); s32 ret_val = E1000_SUCCESS; u16 eeprom_size; @@ -4542,7 +4490,7 @@ e1000_init_eeprom_params(struct e1000_hw *hw) /* Ensure that the Autonomous FLASH update bit is cleared due to * Flash update issue on parts which use a FLASH for NVM. */ eecd &= ~E1000_EECD_AUPDEN; - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); } break; case e1000_80003es2lan: @@ -4626,16 +4574,14 @@ e1000_init_eeprom_params(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code * eecd - EECD's current value *****************************************************************************/ -static void -e1000_raise_ee_clk(struct e1000_hw *hw, - u32 *eecd) +static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd) { /* Raise the clock input to the EEPROM (by setting the SK bit), and then * wait <delay> microseconds. */ *eecd = *eecd | E1000_EECD_SK; - E1000_WRITE_REG(hw, EECD, *eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, *eecd); + E1000_WRITE_FLUSH(); udelay(hw->eeprom.delay_usec); } @@ -4645,16 +4591,14 @@ e1000_raise_ee_clk(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * eecd - EECD's current value *****************************************************************************/ -static void -e1000_lower_ee_clk(struct e1000_hw *hw, - u32 *eecd) +static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd) { /* Lower the clock input to the EEPROM (by clearing the SK bit), and then * wait 50 microseconds. */ *eecd = *eecd & ~E1000_EECD_SK; - E1000_WRITE_REG(hw, EECD, *eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, *eecd); + E1000_WRITE_FLUSH(); udelay(hw->eeprom.delay_usec); } @@ -4665,10 +4609,7 @@ e1000_lower_ee_clk(struct e1000_hw *hw, * data - data to send to the EEPROM * count - number of bits to shift out *****************************************************************************/ -static void -e1000_shift_out_ee_bits(struct e1000_hw *hw, - u16 data, - u16 count) +static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count) { struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 eecd; @@ -4679,7 +4620,7 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw, * In order to do this, "data" must be broken down into bits. */ mask = 0x01 << (count - 1); - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); if (eeprom->type == e1000_eeprom_microwire) { eecd &= ~E1000_EECD_DO; } else if (eeprom->type == e1000_eeprom_spi) { @@ -4696,8 +4637,8 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw, if (data & mask) eecd |= E1000_EECD_DI; - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(eeprom->delay_usec); @@ -4710,7 +4651,7 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw, /* We leave the "DI" bit set to "0" when we leave this routine. */ eecd &= ~E1000_EECD_DI; - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); } /****************************************************************************** @@ -4718,9 +4659,7 @@ e1000_shift_out_ee_bits(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static u16 -e1000_shift_in_ee_bits(struct e1000_hw *hw, - u16 count) +static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count) { u32 eecd; u32 i; @@ -4733,7 +4672,7 @@ e1000_shift_in_ee_bits(struct e1000_hw *hw, * always be clear. */ - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); eecd &= ~(E1000_EECD_DO | E1000_EECD_DI); data = 0; @@ -4742,7 +4681,7 @@ e1000_shift_in_ee_bits(struct e1000_hw *hw, data = data << 1; e1000_raise_ee_clk(hw, &eecd); - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); eecd &= ~(E1000_EECD_DI); if (eecd & E1000_EECD_DO) @@ -4762,8 +4701,7 @@ e1000_shift_in_ee_bits(struct e1000_hw *hw, * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This * function should be called before issuing a command to the EEPROM. *****************************************************************************/ -static s32 -e1000_acquire_eeprom(struct e1000_hw *hw) +static s32 e1000_acquire_eeprom(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 eecd, i=0; @@ -4772,23 +4710,23 @@ e1000_acquire_eeprom(struct e1000_hw *hw) if (e1000_swfw_sync_acquire(hw, E1000_SWFW_EEP_SM)) return -E1000_ERR_SWFW_SYNC; - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); if (hw->mac_type != e1000_82573) { /* Request EEPROM Access */ if (hw->mac_type > e1000_82544) { eecd |= E1000_EECD_REQ; - E1000_WRITE_REG(hw, EECD, eecd); - eecd = E1000_READ_REG(hw, EECD); + ew32(EECD, eecd); + eecd = er32(EECD); while ((!(eecd & E1000_EECD_GNT)) && (i < E1000_EEPROM_GRANT_ATTEMPTS)) { i++; udelay(5); - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); } if (!(eecd & E1000_EECD_GNT)) { eecd &= ~E1000_EECD_REQ; - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); DEBUGOUT("Could not acquire EEPROM grant\n"); e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); return -E1000_ERR_EEPROM; @@ -4801,15 +4739,15 @@ e1000_acquire_eeprom(struct e1000_hw *hw) if (eeprom->type == e1000_eeprom_microwire) { /* Clear SK and DI */ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK); - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); /* Set CS */ eecd |= E1000_EECD_CS; - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); } else if (eeprom->type == e1000_eeprom_spi) { /* Clear SK and CS */ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); udelay(1); } @@ -4821,46 +4759,45 @@ e1000_acquire_eeprom(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static void -e1000_standby_eeprom(struct e1000_hw *hw) +static void e1000_standby_eeprom(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 eecd; - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); if (eeprom->type == e1000_eeprom_microwire) { eecd &= ~(E1000_EECD_CS | E1000_EECD_SK); - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(eeprom->delay_usec); /* Clock high */ eecd |= E1000_EECD_SK; - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(eeprom->delay_usec); /* Select EEPROM */ eecd |= E1000_EECD_CS; - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(eeprom->delay_usec); /* Clock low */ eecd &= ~E1000_EECD_SK; - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(eeprom->delay_usec); } else if (eeprom->type == e1000_eeprom_spi) { /* Toggle CS to flush commands */ eecd |= E1000_EECD_CS; - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(eeprom->delay_usec); eecd &= ~E1000_EECD_CS; - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(eeprom->delay_usec); } } @@ -4870,20 +4807,19 @@ e1000_standby_eeprom(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static void -e1000_release_eeprom(struct e1000_hw *hw) +static void e1000_release_eeprom(struct e1000_hw *hw) { u32 eecd; DEBUGFUNC("e1000_release_eeprom"); - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); if (hw->eeprom.type == e1000_eeprom_spi) { eecd |= E1000_EECD_CS; /* Pull CS high */ eecd &= ~E1000_EECD_SK; /* Lower SCK */ - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); udelay(hw->eeprom.delay_usec); } else if (hw->eeprom.type == e1000_eeprom_microwire) { @@ -4892,25 +4828,25 @@ e1000_release_eeprom(struct e1000_hw *hw) /* CS on Microwire is active-high */ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI); - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); /* Rising edge of clock */ eecd |= E1000_EECD_SK; - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(hw->eeprom.delay_usec); /* Falling edge of clock */ eecd &= ~E1000_EECD_SK; - E1000_WRITE_REG(hw, EECD, eecd); - E1000_WRITE_FLUSH(hw); + ew32(EECD, eecd); + E1000_WRITE_FLUSH(); udelay(hw->eeprom.delay_usec); } /* Stop requesting EEPROM access */ if (hw->mac_type > e1000_82544) { eecd &= ~E1000_EECD_REQ; - E1000_WRITE_REG(hw, EECD, eecd); + ew32(EECD, eecd); } e1000_swfw_sync_release(hw, E1000_SWFW_EEP_SM); @@ -4921,8 +4857,7 @@ e1000_release_eeprom(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static s32 -e1000_spi_eeprom_ready(struct e1000_hw *hw) +static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw) { u16 retry_count = 0; u8 spi_stat_reg; @@ -4967,11 +4902,7 @@ e1000_spi_eeprom_ready(struct e1000_hw *hw) * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -s32 -e1000_read_eeprom(struct e1000_hw *hw, - u16 offset, - u16 words, - u16 *data) +s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 i = 0; @@ -5068,11 +4999,8 @@ e1000_read_eeprom(struct e1000_hw *hw, * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -static s32 -e1000_read_eeprom_eerd(struct e1000_hw *hw, - u16 offset, - u16 words, - u16 *data) +static s32 e1000_read_eeprom_eerd(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { u32 i, eerd = 0; s32 error = 0; @@ -5081,13 +5009,13 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw, eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) + E1000_EEPROM_RW_REG_START; - E1000_WRITE_REG(hw, EERD, eerd); + ew32(EERD, eerd); error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); if (error) { break; } - data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA); + data[i] = (er32(EERD) >> E1000_EEPROM_RW_REG_DATA); } @@ -5102,11 +5030,8 @@ e1000_read_eeprom_eerd(struct e1000_hw *hw, * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -static s32 -e1000_write_eeprom_eewr(struct e1000_hw *hw, - u16 offset, - u16 words, - u16 *data) +static s32 e1000_write_eeprom_eewr(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { u32 register_value = 0; u32 i = 0; @@ -5125,7 +5050,7 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw, break; } - E1000_WRITE_REG(hw, EEWR, register_value); + ew32(EEWR, register_value); error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); @@ -5143,8 +5068,7 @@ e1000_write_eeprom_eewr(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static s32 -e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) +static s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) { u32 attempts = 100000; u32 i, reg = 0; @@ -5152,9 +5076,9 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) for (i = 0; i < attempts; i++) { if (eerd == E1000_EEPROM_POLL_READ) - reg = E1000_READ_REG(hw, EERD); + reg = er32(EERD); else - reg = E1000_READ_REG(hw, EEWR); + reg = er32(EEWR); if (reg & E1000_EEPROM_RW_REG_DONE) { done = E1000_SUCCESS; @@ -5171,8 +5095,7 @@ e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) * * hw - Struct containing variables accessed by shared code ****************************************************************************/ -static bool -e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) +static bool e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) { u32 eecd = 0; @@ -5182,7 +5105,7 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) return false; if (hw->mac_type == e1000_82573) { - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); /* Isolate bits 15 & 16 */ eecd = ((eecd >> 15) & 0x03); @@ -5204,8 +5127,7 @@ e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is * valid. *****************************************************************************/ -s32 -e1000_validate_eeprom_checksum(struct e1000_hw *hw) +s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) { u16 checksum = 0; u16 i, eeprom_data; @@ -5252,7 +5174,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw) checksum += eeprom_data; } - if (checksum == (u16) EEPROM_SUM) + if (checksum == (u16)EEPROM_SUM) return E1000_SUCCESS; else { DEBUGOUT("EEPROM Checksum Invalid\n"); @@ -5268,8 +5190,7 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw) * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA. * Writes the difference to word offset 63 of the EEPROM. *****************************************************************************/ -s32 -e1000_update_eeprom_checksum(struct e1000_hw *hw) +s32 e1000_update_eeprom_checksum(struct e1000_hw *hw) { u32 ctrl_ext; u16 checksum = 0; @@ -5284,7 +5205,7 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw) } checksum += eeprom_data; } - checksum = (u16) EEPROM_SUM - checksum; + checksum = (u16)EEPROM_SUM - checksum; if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { DEBUGOUT("EEPROM Write Error\n"); return -E1000_ERR_EEPROM; @@ -5294,9 +5215,9 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw) e1000_commit_shadow_ram(hw); /* Reload the EEPROM, or else modifications will not appear * until after next adapter reset. */ - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_EE_RST; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + ew32(CTRL_EXT, ctrl_ext); msleep(10); } return E1000_SUCCESS; @@ -5313,11 +5234,7 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw) * If e1000_update_eeprom_checksum is not called after this function, the * EEPROM will most likely contain an invalid checksum. *****************************************************************************/ -s32 -e1000_write_eeprom(struct e1000_hw *hw, - u16 offset, - u16 words, - u16 *data) +s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_eeprom_info *eeprom = &hw->eeprom; s32 status = 0; @@ -5370,11 +5287,8 @@ e1000_write_eeprom(struct e1000_hw *hw, * data - pointer to array of 8 bit words to be written to the EEPROM * *****************************************************************************/ -static s32 -e1000_write_eeprom_spi(struct e1000_hw *hw, - u16 offset, - u16 words, - u16 *data) +static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { struct e1000_eeprom_info *eeprom = &hw->eeprom; u16 widx = 0; @@ -5436,11 +5350,8 @@ e1000_write_eeprom_spi(struct e1000_hw *hw, * data - pointer to array of 16 bit words to be written to the EEPROM * *****************************************************************************/ -static s32 -e1000_write_eeprom_microwire(struct e1000_hw *hw, - u16 offset, - u16 words, - u16 *data) +static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data) { struct e1000_eeprom_info *eeprom = &hw->eeprom; u32 eecd; @@ -5484,7 +5395,7 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw, * If DO does not go high in 10 milliseconds, then error out. */ for (i = 0; i < 200; i++) { - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); if (eecd & E1000_EECD_DO) break; udelay(50); } @@ -5523,8 +5434,7 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw, * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -static s32 -e1000_commit_shadow_ram(struct e1000_hw *hw) +static s32 e1000_commit_shadow_ram(struct e1000_hw *hw) { u32 attempts = 100000; u32 eecd = 0; @@ -5539,9 +5449,9 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) if (hw->mac_type == e1000_82573) { /* The flop register will be used to determine if flash type is STM */ - flop = E1000_READ_REG(hw, FLOP); + flop = er32(FLOP); for (i=0; i < attempts; i++) { - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); if ((eecd & E1000_EECD_FLUPD) == 0) { break; } @@ -5554,14 +5464,14 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) /* If STM opcode located in bits 15:8 of flop, reset firmware */ if ((flop & 0xFF00) == E1000_STM_OPCODE) { - E1000_WRITE_REG(hw, HICR, E1000_HICR_FW_RESET); + ew32(HICR, E1000_HICR_FW_RESET); } /* Perform the flash update */ - E1000_WRITE_REG(hw, EECD, eecd | E1000_EECD_FLUPD); + ew32(EECD, eecd | E1000_EECD_FLUPD); for (i=0; i < attempts; i++) { - eecd = E1000_READ_REG(hw, EECD); + eecd = er32(EECD); if ((eecd & E1000_EECD_FLUPD) == 0) { break; } @@ -5577,7 +5487,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) /* We're writing to the opposite bank so if we're on bank 1, * write to bank 0 etc. We also need to erase the segment that * is going to be written */ - if (!(E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL)) { + if (!(er32(EECD) & E1000_EECD_SEC1VAL)) { new_bank_offset = hw->flash_bank_size * 2; old_bank_offset = 0; e1000_erase_ich8_4k_segment(hw, 1); @@ -5687,8 +5597,7 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_read_mac_addr(struct e1000_hw * hw) +s32 e1000_read_mac_addr(struct e1000_hw *hw) { u16 offset; u16 eeprom_data, i; @@ -5701,8 +5610,8 @@ e1000_read_mac_addr(struct e1000_hw * hw) DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } - hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF); - hw->perm_mac_addr[i+1] = (u8) (eeprom_data >> 8); + hw->perm_mac_addr[i] = (u8)(eeprom_data & 0x00FF); + hw->perm_mac_addr[i+1] = (u8)(eeprom_data >> 8); } switch (hw->mac_type) { @@ -5712,7 +5621,7 @@ e1000_read_mac_addr(struct e1000_hw * hw) case e1000_82546_rev_3: case e1000_82571: case e1000_80003es2lan: - if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) + if (er32(STATUS) & E1000_STATUS_FUNC_1) hw->perm_mac_addr[5] ^= 0x01; break; } @@ -5731,8 +5640,7 @@ e1000_read_mac_addr(struct e1000_hw * hw) * of the receive addresss registers. Clears the multicast table. Assumes * the receiver is in reset when the routine is called. *****************************************************************************/ -static void -e1000_init_rx_addrs(struct e1000_hw *hw) +static void e1000_init_rx_addrs(struct e1000_hw *hw) { u32 i; u32 rar_num; @@ -5758,9 +5666,9 @@ e1000_init_rx_addrs(struct e1000_hw *hw) DEBUGOUT("Clearing RAR[1-15]\n"); for (i = 1; i < rar_num; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } } @@ -5770,9 +5678,7 @@ e1000_init_rx_addrs(struct e1000_hw *hw) * hw - Struct containing variables accessed by shared code * mc_addr - the multicast address to hash *****************************************************************************/ -u32 -e1000_hash_mc_addr(struct e1000_hw *hw, - u8 *mc_addr) +u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) { u32 hash_value = 0; @@ -5787,37 +5693,37 @@ e1000_hash_mc_addr(struct e1000_hw *hw, case 0: if (hw->mac_type == e1000_ich8lan) { /* [47:38] i.e. 0x158 for above example address */ - hash_value = ((mc_addr[4] >> 6) | (((u16) mc_addr[5]) << 2)); + hash_value = ((mc_addr[4] >> 6) | (((u16)mc_addr[5]) << 2)); } else { /* [47:36] i.e. 0x563 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4)); + hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); } break; case 1: if (hw->mac_type == e1000_ich8lan) { /* [46:37] i.e. 0x2B1 for above example address */ - hash_value = ((mc_addr[4] >> 5) | (((u16) mc_addr[5]) << 3)); + hash_value = ((mc_addr[4] >> 5) | (((u16)mc_addr[5]) << 3)); } else { /* [46:35] i.e. 0xAC6 for above example address */ - hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5)); + hash_value = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); } break; case 2: if (hw->mac_type == e1000_ich8lan) { /*[45:36] i.e. 0x163 for above example address */ - hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4)); + hash_value = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); } else { /* [45:34] i.e. 0x5D8 for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6)); + hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); } break; case 3: if (hw->mac_type == e1000_ich8lan) { /* [43:34] i.e. 0x18D for above example address */ - hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6)); + hash_value = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); } else { /* [43:32] i.e. 0x634 for above example address */ - hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8)); + hash_value = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); } break; } @@ -5835,9 +5741,7 @@ e1000_hash_mc_addr(struct e1000_hw *hw, * hw - Struct containing variables accessed by shared code * hash_value - Multicast address hash value *****************************************************************************/ -void -e1000_mta_set(struct e1000_hw *hw, - u32 hash_value) +void e1000_mta_set(struct e1000_hw *hw, u32 hash_value) { u32 hash_bit, hash_reg; u32 mta; @@ -5868,12 +5772,12 @@ e1000_mta_set(struct e1000_hw *hw, if ((hw->mac_type == e1000_82544) && ((hash_reg & 0x1) == 1)) { temp = E1000_READ_REG_ARRAY(hw, MTA, (hash_reg - 1)); E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); E1000_WRITE_REG_ARRAY(hw, MTA, (hash_reg - 1), temp); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } else { E1000_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } } @@ -5884,20 +5788,16 @@ e1000_mta_set(struct e1000_hw *hw, * addr - Address to put into receive address register * index - Receive address register to write *****************************************************************************/ -void -e1000_rar_set(struct e1000_hw *hw, - u8 *addr, - u32 index) +void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) { u32 rar_low, rar_high; /* HW expects these in little endian so we reverse the byte order * from network order (big endian) to little endian */ - rar_low = ((u32) addr[0] | - ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); - rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); + rar_low = ((u32)addr[0] | ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | ((u32)addr[3] << 24)); + rar_high = ((u32)addr[4] | ((u32)addr[5] << 8)); /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx * unit hang. @@ -5930,9 +5830,9 @@ e1000_rar_set(struct e1000_hw *hw, } E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } /****************************************************************************** @@ -5942,10 +5842,7 @@ e1000_rar_set(struct e1000_hw *hw, * offset - Offset in VLAN filer table to write * value - Value to write into VLAN filter table *****************************************************************************/ -void -e1000_write_vfta(struct e1000_hw *hw, - u32 offset, - u32 value) +void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) { u32 temp; @@ -5955,12 +5852,12 @@ e1000_write_vfta(struct e1000_hw *hw, if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) { temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1)); E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } else { E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } } @@ -5969,8 +5866,7 @@ e1000_write_vfta(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static void -e1000_clear_vfta(struct e1000_hw *hw) +static void e1000_clear_vfta(struct e1000_hw *hw) { u32 offset; u32 vfta_value = 0; @@ -5999,12 +5895,11 @@ e1000_clear_vfta(struct e1000_hw *hw) * manageability unit */ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_FLUSH(); } } -static s32 -e1000_id_led_init(struct e1000_hw * hw) +static s32 e1000_id_led_init(struct e1000_hw *hw) { u32 ledctl; const u32 ledctl_mask = 0x000000FF; @@ -6020,7 +5915,7 @@ e1000_id_led_init(struct e1000_hw * hw) return E1000_SUCCESS; } - ledctl = E1000_READ_REG(hw, LEDCTL); + ledctl = er32(LEDCTL); hw->ledctl_default = ledctl; hw->ledctl_mode1 = hw->ledctl_default; hw->ledctl_mode2 = hw->ledctl_default; @@ -6086,8 +5981,7 @@ e1000_id_led_init(struct e1000_hw * hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_setup_led(struct e1000_hw *hw) +s32 e1000_setup_led(struct e1000_hw *hw) { u32 ledctl; s32 ret_val = E1000_SUCCESS; @@ -6118,7 +6012,7 @@ e1000_setup_led(struct e1000_hw *hw) /* Fall Through */ default: if (hw->media_type == e1000_media_type_fiber) { - ledctl = E1000_READ_REG(hw, LEDCTL); + ledctl = er32(LEDCTL); /* Save current LEDCTL settings */ hw->ledctl_default = ledctl; /* Turn off LED0 */ @@ -6127,9 +6021,9 @@ e1000_setup_led(struct e1000_hw *hw) E1000_LEDCTL_LED0_MODE_MASK); ledctl |= (E1000_LEDCTL_MODE_LED_OFF << E1000_LEDCTL_LED0_MODE_SHIFT); - E1000_WRITE_REG(hw, LEDCTL, ledctl); + ew32(LEDCTL, ledctl); } else if (hw->media_type == e1000_media_type_copper) - E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1); + ew32(LEDCTL, hw->ledctl_mode1); break; } @@ -6145,8 +6039,7 @@ e1000_setup_led(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_blink_led_start(struct e1000_hw *hw) +s32 e1000_blink_led_start(struct e1000_hw *hw) { s16 i; u32 ledctl_blink = 0; @@ -6170,7 +6063,7 @@ e1000_blink_led_start(struct e1000_hw *hw) ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << (i * 8)); } - E1000_WRITE_REG(hw, LEDCTL, ledctl_blink); + ew32(LEDCTL, ledctl_blink); return E1000_SUCCESS; } @@ -6180,8 +6073,7 @@ e1000_blink_led_start(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_cleanup_led(struct e1000_hw *hw) +s32 e1000_cleanup_led(struct e1000_hw *hw) { s32 ret_val = E1000_SUCCESS; @@ -6210,7 +6102,7 @@ e1000_cleanup_led(struct e1000_hw *hw) break; } /* Restore LEDCTL settings */ - E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_default); + ew32(LEDCTL, hw->ledctl_default); break; } @@ -6222,10 +6114,9 @@ e1000_cleanup_led(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_led_on(struct e1000_hw *hw) +s32 e1000_led_on(struct e1000_hw *hw) { - u32 ctrl = E1000_READ_REG(hw, CTRL); + u32 ctrl = er32(CTRL); DEBUGFUNC("e1000_led_on"); @@ -6257,13 +6148,13 @@ e1000_led_on(struct e1000_hw *hw) e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON)); } else if (hw->media_type == e1000_media_type_copper) { - E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode2); + ew32(LEDCTL, hw->ledctl_mode2); return E1000_SUCCESS; } break; } - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); return E1000_SUCCESS; } @@ -6273,10 +6164,9 @@ e1000_led_on(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -s32 -e1000_led_off(struct e1000_hw *hw) +s32 e1000_led_off(struct e1000_hw *hw) { - u32 ctrl = E1000_READ_REG(hw, CTRL); + u32 ctrl = er32(CTRL); DEBUGFUNC("e1000_led_off"); @@ -6308,13 +6198,13 @@ e1000_led_off(struct e1000_hw *hw) e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL_LED, (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_OFF)); } else if (hw->media_type == e1000_media_type_copper) { - E1000_WRITE_REG(hw, LEDCTL, hw->ledctl_mode1); + ew32(LEDCTL, hw->ledctl_mode1); return E1000_SUCCESS; } break; } - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); return E1000_SUCCESS; } @@ -6324,98 +6214,97 @@ e1000_led_off(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static void -e1000_clear_hw_cntrs(struct e1000_hw *hw) +static void e1000_clear_hw_cntrs(struct e1000_hw *hw) { volatile u32 temp; - temp = E1000_READ_REG(hw, CRCERRS); - temp = E1000_READ_REG(hw, SYMERRS); - temp = E1000_READ_REG(hw, MPC); - temp = E1000_READ_REG(hw, SCC); - temp = E1000_READ_REG(hw, ECOL); - temp = E1000_READ_REG(hw, MCC); - temp = E1000_READ_REG(hw, LATECOL); - temp = E1000_READ_REG(hw, COLC); - temp = E1000_READ_REG(hw, DC); - temp = E1000_READ_REG(hw, SEC); - temp = E1000_READ_REG(hw, RLEC); - temp = E1000_READ_REG(hw, XONRXC); - temp = E1000_READ_REG(hw, XONTXC); - temp = E1000_READ_REG(hw, XOFFRXC); - temp = E1000_READ_REG(hw, XOFFTXC); - temp = E1000_READ_REG(hw, FCRUC); + temp = er32(CRCERRS); + temp = er32(SYMERRS); + temp = er32(MPC); + temp = er32(SCC); + temp = er32(ECOL); + temp = er32(MCC); + temp = er32(LATECOL); + temp = er32(COLC); + temp = er32(DC); + temp = er32(SEC); + temp = er32(RLEC); + temp = er32(XONRXC); + temp = er32(XONTXC); + temp = er32(XOFFRXC); + temp = er32(XOFFTXC); + temp = er32(FCRUC); if (hw->mac_type != e1000_ich8lan) { - temp = E1000_READ_REG(hw, PRC64); - temp = E1000_READ_REG(hw, PRC127); - temp = E1000_READ_REG(hw, PRC255); - temp = E1000_READ_REG(hw, PRC511); - temp = E1000_READ_REG(hw, PRC1023); - temp = E1000_READ_REG(hw, PRC1522); - } - - temp = E1000_READ_REG(hw, GPRC); - temp = E1000_READ_REG(hw, BPRC); - temp = E1000_READ_REG(hw, MPRC); - temp = E1000_READ_REG(hw, GPTC); - temp = E1000_READ_REG(hw, GORCL); - temp = E1000_READ_REG(hw, GORCH); - temp = E1000_READ_REG(hw, GOTCL); - temp = E1000_READ_REG(hw, GOTCH); - temp = E1000_READ_REG(hw, RNBC); - temp = E1000_READ_REG(hw, RUC); - temp = E1000_READ_REG(hw, RFC); - temp = E1000_READ_REG(hw, ROC); - temp = E1000_READ_REG(hw, RJC); - temp = E1000_READ_REG(hw, TORL); - temp = E1000_READ_REG(hw, TORH); - temp = E1000_READ_REG(hw, TOTL); - temp = E1000_READ_REG(hw, TOTH); - temp = E1000_READ_REG(hw, TPR); - temp = E1000_READ_REG(hw, TPT); + temp = er32(PRC64); + temp = er32(PRC127); + temp = er32(PRC255); + temp = er32(PRC511); + temp = er32(PRC1023); + temp = er32(PRC1522); + } + + temp = er32(GPRC); + temp = er32(BPRC); + temp = er32(MPRC); + temp = er32(GPTC); + temp = er32(GORCL); + temp = er32(GORCH); + temp = er32(GOTCL); + temp = er32(GOTCH); + temp = er32(RNBC); + temp = er32(RUC); + temp = er32(RFC); + temp = er32(ROC); + temp = er32(RJC); + temp = er32(TORL); + temp = er32(TORH); + temp = er32(TOTL); + temp = er32(TOTH); + temp = er32(TPR); + temp = er32(TPT); if (hw->mac_type != e1000_ich8lan) { - temp = E1000_READ_REG(hw, PTC64); - temp = E1000_READ_REG(hw, PTC127); - temp = E1000_READ_REG(hw, PTC255); - temp = E1000_READ_REG(hw, PTC511); - temp = E1000_READ_REG(hw, PTC1023); - temp = E1000_READ_REG(hw, PTC1522); + temp = er32(PTC64); + temp = er32(PTC127); + temp = er32(PTC255); + temp = er32(PTC511); + temp = er32(PTC1023); + temp = er32(PTC1522); } - temp = E1000_READ_REG(hw, MPTC); - temp = E1000_READ_REG(hw, BPTC); + temp = er32(MPTC); + temp = er32(BPTC); if (hw->mac_type < e1000_82543) return; - temp = E1000_READ_REG(hw, ALGNERRC); - temp = E1000_READ_REG(hw, RXERRC); - temp = E1000_READ_REG(hw, TNCRS); - temp = E1000_READ_REG(hw, CEXTERR); - temp = E1000_READ_REG(hw, TSCTC); - temp = E1000_READ_REG(hw, TSCTFC); + temp = er32(ALGNERRC); + temp = er32(RXERRC); + temp = er32(TNCRS); + temp = er32(CEXTERR); + temp = er32(TSCTC); + temp = er32(TSCTFC); if (hw->mac_type <= e1000_82544) return; - temp = E1000_READ_REG(hw, MGTPRC); - temp = E1000_READ_REG(hw, MGTPDC); - temp = E1000_READ_REG(hw, MGTPTC); + temp = er32(MGTPRC); + temp = er32(MGTPDC); + temp = er32(MGTPTC); if (hw->mac_type <= e1000_82547_rev_2) return; - temp = E1000_READ_REG(hw, IAC); - temp = E1000_READ_REG(hw, ICRXOC); + temp = er32(IAC); + temp = er32(ICRXOC); if (hw->mac_type == e1000_ich8lan) return; - temp = E1000_READ_REG(hw, ICRXPTC); - temp = E1000_READ_REG(hw, ICRXATC); - temp = E1000_READ_REG(hw, ICTXPTC); - temp = E1000_READ_REG(hw, ICTXATC); - temp = E1000_READ_REG(hw, ICTXQEC); - temp = E1000_READ_REG(hw, ICTXQMTC); - temp = E1000_READ_REG(hw, ICRXDMTC); + temp = er32(ICRXPTC); + temp = er32(ICRXATC); + temp = er32(ICTXPTC); + temp = er32(ICTXATC); + temp = er32(ICTXQEC); + temp = er32(ICTXQMTC); + temp = er32(ICRXDMTC); } /****************************************************************************** @@ -6428,8 +6317,7 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio * before calling this function. *****************************************************************************/ -void -e1000_reset_adaptive(struct e1000_hw *hw) +void e1000_reset_adaptive(struct e1000_hw *hw) { DEBUGFUNC("e1000_reset_adaptive"); @@ -6442,7 +6330,7 @@ e1000_reset_adaptive(struct e1000_hw *hw) hw->ifs_ratio = IFS_RATIO; } hw->in_ifs_mode = false; - E1000_WRITE_REG(hw, AIT, 0); + ew32(AIT, 0); } else { DEBUGOUT("Not in Adaptive IFS mode!\n"); } @@ -6456,8 +6344,7 @@ e1000_reset_adaptive(struct e1000_hw *hw) * tx_packets - Number of transmits since last callback * total_collisions - Number of collisions since last callback *****************************************************************************/ -void -e1000_update_adaptive(struct e1000_hw *hw) +void e1000_update_adaptive(struct e1000_hw *hw) { DEBUGFUNC("e1000_update_adaptive"); @@ -6470,14 +6357,14 @@ e1000_update_adaptive(struct e1000_hw *hw) hw->current_ifs_val = hw->ifs_min_val; else hw->current_ifs_val += hw->ifs_step_size; - E1000_WRITE_REG(hw, AIT, hw->current_ifs_val); + ew32(AIT, hw->current_ifs_val); } } } else { if (hw->in_ifs_mode && (hw->tx_packet_delta <= MIN_NUM_XMITS)) { hw->current_ifs_val = 0; hw->in_ifs_mode = false; - E1000_WRITE_REG(hw, AIT, 0); + ew32(AIT, 0); } } } else { @@ -6492,11 +6379,8 @@ e1000_update_adaptive(struct e1000_hw *hw) * frame_len - The length of the frame in question * mac_addr - The Ethernet destination address of the frame in question *****************************************************************************/ -void -e1000_tbi_adjust_stats(struct e1000_hw *hw, - struct e1000_hw_stats *stats, - u32 frame_len, - u8 *mac_addr) +void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats, + u32 frame_len, u8 *mac_addr) { u64 carry_bit; @@ -6527,7 +6411,7 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw, * since the test for a multicast frame will test positive on * a broadcast frame. */ - if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff)) + if ((mac_addr[0] == (u8)0xff) && (mac_addr[1] == (u8)0xff)) /* Broadcast packet */ stats->bprc++; else if (*mac_addr & 0x01) @@ -6570,8 +6454,7 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void -e1000_get_bus_info(struct e1000_hw *hw) +void e1000_get_bus_info(struct e1000_hw *hw) { s32 ret_val; u16 pci_ex_link_status; @@ -6605,7 +6488,7 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_width = e1000_bus_width_pciex_1; break; default: - status = E1000_READ_REG(hw, STATUS); + status = er32(STATUS); hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? e1000_bus_type_pcix : e1000_bus_type_pci; @@ -6645,10 +6528,7 @@ e1000_get_bus_info(struct e1000_hw *hw) * offset - offset to write to * value - value to write *****************************************************************************/ -static void -e1000_write_reg_io(struct e1000_hw *hw, - u32 offset, - u32 value) +static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value) { unsigned long io_addr = hw->io_base; unsigned long io_data = hw->io_base + 4; @@ -6672,10 +6552,8 @@ e1000_write_reg_io(struct e1000_hw *hw, * register to the minimum and maximum range. * For IGP phy's, the function calculates the range by the AGC registers. *****************************************************************************/ -static s32 -e1000_get_cable_length(struct e1000_hw *hw, - u16 *min_length, - u16 *max_length) +static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length, + u16 *max_length) { s32 ret_val; u16 agc_value = 0; @@ -6863,9 +6741,8 @@ e1000_get_cable_length(struct e1000_hw *hw, * return 0. If the link speed is 1000 Mbps the polarity status is in the * IGP01E1000_PHY_PCS_INIT_REG. *****************************************************************************/ -static s32 -e1000_check_polarity(struct e1000_hw *hw, - e1000_rev_polarity *polarity) +static s32 e1000_check_polarity(struct e1000_hw *hw, + e1000_rev_polarity *polarity) { s32 ret_val; u16 phy_data; @@ -6939,8 +6816,7 @@ e1000_check_polarity(struct e1000_hw *hw, * Link Health register. In IGP this bit is latched high, so the driver must * read it immediately after link is established. *****************************************************************************/ -static s32 -e1000_check_downshift(struct e1000_hw *hw) +static s32 e1000_check_downshift(struct e1000_hw *hw) { s32 ret_val; u16 phy_data; @@ -6985,9 +6861,7 @@ e1000_check_downshift(struct e1000_hw *hw) * ****************************************************************************/ -static s32 -e1000_config_dsp_after_link_change(struct e1000_hw *hw, - bool link_up) +static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up) { s32 ret_val; u16 phy_data, phy_saved_data, speed, duplex, i; @@ -7173,8 +7047,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code ****************************************************************************/ -static s32 -e1000_set_phy_mode(struct e1000_hw *hw) +static s32 e1000_set_phy_mode(struct e1000_hw *hw) { s32 ret_val; u16 eeprom_data; @@ -7218,9 +7091,7 @@ e1000_set_phy_mode(struct e1000_hw *hw) * ****************************************************************************/ -static s32 -e1000_set_d3_lplu_state(struct e1000_hw *hw, - bool active) +static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) { u32 phy_ctrl = 0; s32 ret_val; @@ -7242,7 +7113,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, /* MAC writes into PHY register based on the state transition * and start auto-negotiation. SW driver can overwrite the settings * in CSR PHY power control E1000_PHY_CTRL register. */ - phy_ctrl = E1000_READ_REG(hw, PHY_CTRL); + phy_ctrl = er32(PHY_CTRL); } else { ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); if (ret_val) @@ -7259,7 +7130,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, } else { if (hw->mac_type == e1000_ich8lan) { phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU; - E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + ew32(PHY_CTRL, phy_ctrl); } else { phy_data &= ~IGP02E1000_PM_D3_LPLU; ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, @@ -7310,7 +7181,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, } else { if (hw->mac_type == e1000_ich8lan) { phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU; - E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + ew32(PHY_CTRL, phy_ctrl); } else { phy_data |= IGP02E1000_PM_D3_LPLU; ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, @@ -7348,9 +7219,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, * ****************************************************************************/ -static s32 -e1000_set_d0_lplu_state(struct e1000_hw *hw, - bool active) +static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) { u32 phy_ctrl = 0; s32 ret_val; @@ -7361,7 +7230,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, return E1000_SUCCESS; if (hw->mac_type == e1000_ich8lan) { - phy_ctrl = E1000_READ_REG(hw, PHY_CTRL); + phy_ctrl = er32(PHY_CTRL); } else { ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); if (ret_val) @@ -7371,7 +7240,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, if (!active) { if (hw->mac_type == e1000_ich8lan) { phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU; - E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + ew32(PHY_CTRL, phy_ctrl); } else { phy_data &= ~IGP02E1000_PM_D0_LPLU; ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); @@ -7412,7 +7281,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, if (hw->mac_type == e1000_ich8lan) { phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU; - E1000_WRITE_REG(hw, PHY_CTRL, phy_ctrl); + ew32(PHY_CTRL, phy_ctrl); } else { phy_data |= IGP02E1000_PM_D0_LPLU; ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); @@ -7439,8 +7308,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -static s32 -e1000_set_vco_speed(struct e1000_hw *hw) +static s32 e1000_set_vco_speed(struct e1000_hw *hw) { s32 ret_val; u16 default_page = 0; @@ -7503,8 +7371,7 @@ e1000_set_vco_speed(struct e1000_hw *hw) * * returns: - E1000_SUCCESS . ****************************************************************************/ -static s32 -e1000_host_if_read_cookie(struct e1000_hw * hw, u8 *buffer) +static s32 e1000_host_if_read_cookie(struct e1000_hw *hw, u8 *buffer) { u8 i; u32 offset = E1000_MNG_DHCP_COOKIE_OFFSET; @@ -7514,7 +7381,7 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, u8 *buffer) offset = (offset >> 2); for (i = 0; i < length; i++) { - *((u32 *) buffer + i) = + *((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i); } return E1000_SUCCESS; @@ -7530,21 +7397,20 @@ e1000_host_if_read_cookie(struct e1000_hw * hw, u8 *buffer) * timeout * - E1000_SUCCESS for success. ****************************************************************************/ -static s32 -e1000_mng_enable_host_if(struct e1000_hw * hw) +static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) { u32 hicr; u8 i; /* Check that the host interface is enabled. */ - hicr = E1000_READ_REG(hw, HICR); + hicr = er32(HICR); if ((hicr & E1000_HICR_EN) == 0) { DEBUGOUT("E1000_HOST_EN bit disabled.\n"); return -E1000_ERR_HOST_INTERFACE_COMMAND; } /* check the previous command is completed */ for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { - hicr = E1000_READ_REG(hw, HICR); + hicr = er32(HICR); if (!(hicr & E1000_HICR_C)) break; mdelay(1); @@ -7564,9 +7430,8 @@ e1000_mng_enable_host_if(struct e1000_hw * hw) * * returns - E1000_SUCCESS for success. ****************************************************************************/ -static s32 -e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer, - u16 length, u16 offset, u8 *sum) +static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, + u16 offset, u8 *sum) { u8 *tmp; u8 *bufptr = buffer; @@ -7632,9 +7497,8 @@ e1000_mng_host_if_write(struct e1000_hw * hw, u8 *buffer, * * returns - E1000_SUCCESS for success. ****************************************************************************/ -static s32 -e1000_mng_write_cmd_header(struct e1000_hw * hw, - struct e1000_host_mng_command_header * hdr) +static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr) { u16 i; u8 sum; @@ -7648,7 +7512,7 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw, sum = hdr->checksum; hdr->checksum = 0; - buffer = (u8 *) hdr; + buffer = (u8 *)hdr; i = length; while (i--) sum += buffer[i]; @@ -7658,8 +7522,8 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw, length >>= 2; /* The device driver writes the relevant command block into the ram area. */ for (i = 0; i < length; i++) { - E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *) hdr + i)); - E1000_WRITE_FLUSH(hw); + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((u32 *)hdr + i)); + E1000_WRITE_FLUSH(); } return E1000_SUCCESS; @@ -7672,14 +7536,13 @@ e1000_mng_write_cmd_header(struct e1000_hw * hw, * * returns - E1000_SUCCESS for success. ****************************************************************************/ -static s32 -e1000_mng_write_commit(struct e1000_hw * hw) +static s32 e1000_mng_write_commit(struct e1000_hw *hw) { u32 hicr; - hicr = E1000_READ_REG(hw, HICR); + hicr = er32(HICR); /* Setting this bit tells the ARC that a new command is pending. */ - E1000_WRITE_REG(hw, HICR, hicr | E1000_HICR_C); + ew32(HICR, hicr | E1000_HICR_C); return E1000_SUCCESS; } @@ -7690,12 +7553,11 @@ e1000_mng_write_commit(struct e1000_hw * hw) * * returns - true when the mode is IAMT or false. ****************************************************************************/ -bool -e1000_check_mng_mode(struct e1000_hw *hw) +bool e1000_check_mng_mode(struct e1000_hw *hw) { u32 fwsm; - fwsm = E1000_READ_REG(hw, FWSM); + fwsm = er32(FWSM); if (hw->mac_type == e1000_ich8lan) { if ((fwsm & E1000_FWSM_MODE_MASK) == @@ -7712,9 +7574,7 @@ e1000_check_mng_mode(struct e1000_hw *hw) /***************************************************************************** * This function writes the dhcp info . ****************************************************************************/ -s32 -e1000_mng_write_dhcp_info(struct e1000_hw * hw, u8 *buffer, - u16 length) +s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) { s32 ret_val; struct e1000_host_mng_command_header hdr; @@ -7744,8 +7604,7 @@ e1000_mng_write_dhcp_info(struct e1000_hw * hw, u8 *buffer, * * returns - checksum of buffer contents. ****************************************************************************/ -static u8 -e1000_calculate_mng_checksum(char *buffer, u32 length) +static u8 e1000_calculate_mng_checksum(char *buffer, u32 length) { u8 sum = 0; u32 i; @@ -7756,7 +7615,7 @@ e1000_calculate_mng_checksum(char *buffer, u32 length) for (i=0; i < length; i++) sum += buffer[i]; - return (u8) (0 - sum); + return (u8)(0 - sum); } /***************************************************************************** @@ -7764,8 +7623,7 @@ e1000_calculate_mng_checksum(char *buffer, u32 length) * * returns - true for packet filtering or false. ****************************************************************************/ -bool -e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) +bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) { /* called in init as well as watchdog timer functions */ @@ -7806,21 +7664,20 @@ e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) * returns: - true/false * *****************************************************************************/ -u32 -e1000_enable_mng_pass_thru(struct e1000_hw *hw) +u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw) { u32 manc; u32 fwsm, factps; if (hw->asf_firmware_present) { - manc = E1000_READ_REG(hw, MANC); + manc = er32(MANC); if (!(manc & E1000_MANC_RCV_TCO_EN) || !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) return false; if (e1000_arc_subsystem_valid(hw)) { - fwsm = E1000_READ_REG(hw, FWSM); - factps = E1000_READ_REG(hw, FACTPS); + fwsm = er32(FWSM); + factps = er32(FACTPS); if ((((fwsm & E1000_FWSM_MODE_MASK) >> E1000_FWSM_MODE_SHIFT) == e1000_mng_mode_pt) && !(factps & E1000_FACTPS_MNGCG)) @@ -7832,8 +7689,7 @@ e1000_enable_mng_pass_thru(struct e1000_hw *hw) return false; } -static s32 -e1000_polarity_reversal_workaround(struct e1000_hw *hw) +static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw) { s32 ret_val; u16 mii_status_reg; @@ -7926,8 +7782,7 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) * returns: - none. * ***************************************************************************/ -static void -e1000_set_pci_express_master_disable(struct e1000_hw *hw) +static void e1000_set_pci_express_master_disable(struct e1000_hw *hw) { u32 ctrl; @@ -7936,9 +7791,9 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) if (hw->bus_type != e1000_bus_type_pci_express) return; - ctrl = E1000_READ_REG(hw, CTRL); + ctrl = er32(CTRL); ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; - E1000_WRITE_REG(hw, CTRL, ctrl); + ew32(CTRL, ctrl); } /******************************************************************************* @@ -7952,8 +7807,7 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) * E1000_SUCCESS master requests disabled. * ******************************************************************************/ -s32 -e1000_disable_pciex_master(struct e1000_hw *hw) +s32 e1000_disable_pciex_master(struct e1000_hw *hw) { s32 timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */ @@ -7965,7 +7819,7 @@ e1000_disable_pciex_master(struct e1000_hw *hw) e1000_set_pci_express_master_disable(hw); while (timeout) { - if (!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) + if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) break; else udelay(100); @@ -7990,8 +7844,7 @@ e1000_disable_pciex_master(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ******************************************************************************/ -static s32 -e1000_get_auto_rd_done(struct e1000_hw *hw) +static s32 e1000_get_auto_rd_done(struct e1000_hw *hw) { s32 timeout = AUTO_READ_DONE_TIMEOUT; @@ -8007,7 +7860,7 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) case e1000_80003es2lan: case e1000_ich8lan: while (timeout) { - if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) + if (er32(EECD) & E1000_EECD_AUTO_RD) break; else msleep(1); timeout--; @@ -8038,8 +7891,7 @@ e1000_get_auto_rd_done(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ***************************************************************************/ -static s32 -e1000_get_phy_cfg_done(struct e1000_hw *hw) +static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw) { s32 timeout = PHY_CFG_TIMEOUT; u32 cfg_mask = E1000_EEPROM_CFG_DONE; @@ -8052,13 +7904,13 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) break; case e1000_80003es2lan: /* Separate *_CFG_DONE_* bit for each port */ - if (E1000_READ_REG(hw, STATUS) & E1000_STATUS_FUNC_1) + if (er32(STATUS) & E1000_STATUS_FUNC_1) cfg_mask = E1000_EEPROM_CFG_DONE_PORT_1; /* Fall Through */ case e1000_82571: case e1000_82572: while (timeout) { - if (E1000_READ_REG(hw, EEMNGCTL) & cfg_mask) + if (er32(EEMNGCTL) & cfg_mask) break; else msleep(1); @@ -8085,8 +7937,7 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ***************************************************************************/ -static s32 -e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) +static s32 e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) { s32 timeout; u32 swsm; @@ -8105,11 +7956,11 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) /* Get the FW semaphore. */ timeout = hw->eeprom.word_size + 1; while (timeout) { - swsm = E1000_READ_REG(hw, SWSM); + swsm = er32(SWSM); swsm |= E1000_SWSM_SWESMBI; - E1000_WRITE_REG(hw, SWSM, swsm); + ew32(SWSM, swsm); /* if we managed to set the bit we got the semaphore. */ - swsm = E1000_READ_REG(hw, SWSM); + swsm = er32(SWSM); if (swsm & E1000_SWSM_SWESMBI) break; @@ -8135,8 +7986,7 @@ e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) * returns: - None. * ***************************************************************************/ -static void -e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) { u32 swsm; @@ -8145,13 +7995,13 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) if (!hw->eeprom_semaphore_present) return; - swsm = E1000_READ_REG(hw, SWSM); + swsm = er32(SWSM); if (hw->mac_type == e1000_80003es2lan) { /* Release both semaphores. */ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); } else swsm &= ~(E1000_SWSM_SWESMBI); - E1000_WRITE_REG(hw, SWSM, swsm); + ew32(SWSM, swsm); } /*************************************************************************** @@ -8164,8 +8014,7 @@ e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) * E1000_SUCCESS at any other case. * ***************************************************************************/ -static s32 -e1000_get_software_semaphore(struct e1000_hw *hw) +static s32 e1000_get_software_semaphore(struct e1000_hw *hw) { s32 timeout = hw->eeprom.word_size + 1; u32 swsm; @@ -8177,7 +8026,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) } while (timeout) { - swsm = E1000_READ_REG(hw, SWSM); + swsm = er32(SWSM); /* If SMBI bit cleared, it is now set and we hold the semaphore */ if (!(swsm & E1000_SWSM_SMBI)) break; @@ -8200,8 +8049,7 @@ e1000_get_software_semaphore(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -static void -e1000_release_software_semaphore(struct e1000_hw *hw) +static void e1000_release_software_semaphore(struct e1000_hw *hw) { u32 swsm; @@ -8211,10 +8059,10 @@ e1000_release_software_semaphore(struct e1000_hw *hw) return; } - swsm = E1000_READ_REG(hw, SWSM); + swsm = er32(SWSM); /* Release the SW semaphores.*/ swsm &= ~E1000_SWSM_SMBI; - E1000_WRITE_REG(hw, SWSM, swsm); + ew32(SWSM, swsm); } /****************************************************************************** @@ -8228,26 +8076,24 @@ e1000_release_software_semaphore(struct e1000_hw *hw) * E1000_SUCCESS * *****************************************************************************/ -s32 -e1000_check_phy_reset_block(struct e1000_hw *hw) +s32 e1000_check_phy_reset_block(struct e1000_hw *hw) { u32 manc = 0; u32 fwsm = 0; if (hw->mac_type == e1000_ich8lan) { - fwsm = E1000_READ_REG(hw, FWSM); + fwsm = er32(FWSM); return (fwsm & E1000_FWSM_RSPCIPHY) ? E1000_SUCCESS : E1000_BLK_PHY_RESET; } if (hw->mac_type > e1000_82547_rev_2) - manc = E1000_READ_REG(hw, MANC); + manc = er32(MANC); return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? E1000_BLK_PHY_RESET : E1000_SUCCESS; } -static u8 -e1000_arc_subsystem_valid(struct e1000_hw *hw) +static u8 e1000_arc_subsystem_valid(struct e1000_hw *hw) { u32 fwsm; @@ -8261,7 +8107,7 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) case e1000_82572: case e1000_82573: case e1000_80003es2lan: - fwsm = E1000_READ_REG(hw, FWSM); + fwsm = er32(FWSM); if ((fwsm & E1000_FWSM_MODE_MASK) != 0) return true; break; @@ -8283,8 +8129,7 @@ e1000_arc_subsystem_valid(struct e1000_hw *hw) * returns: E1000_SUCCESS * *****************************************************************************/ -static s32 -e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop) +static s32 e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop) { u32 gcr_reg = 0; @@ -8297,19 +8142,19 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop) return E1000_SUCCESS; if (no_snoop) { - gcr_reg = E1000_READ_REG(hw, GCR); + gcr_reg = er32(GCR); gcr_reg &= ~(PCI_EX_NO_SNOOP_ALL); gcr_reg |= no_snoop; - E1000_WRITE_REG(hw, GCR, gcr_reg); + ew32(GCR, gcr_reg); } if (hw->mac_type == e1000_ich8lan) { u32 ctrl_ext; - E1000_WRITE_REG(hw, GCR, PCI_EX_82566_SNOOP_ALL); + ew32(GCR, PCI_EX_82566_SNOOP_ALL); - ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_RO_DIS; - E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + ew32(CTRL_EXT, ctrl_ext); } return E1000_SUCCESS; @@ -8324,8 +8169,7 @@ e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, u32 no_snoop) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -static s32 -e1000_get_software_flag(struct e1000_hw *hw) +static s32 e1000_get_software_flag(struct e1000_hw *hw) { s32 timeout = PHY_CFG_TIMEOUT; u32 extcnf_ctrl; @@ -8334,11 +8178,11 @@ e1000_get_software_flag(struct e1000_hw *hw) if (hw->mac_type == e1000_ich8lan) { while (timeout) { - extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG; - E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); + ew32(EXTCNF_CTRL, extcnf_ctrl); - extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl = er32(EXTCNF_CTRL); if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) break; mdelay(1); @@ -8363,17 +8207,16 @@ e1000_get_software_flag(struct e1000_hw *hw) * hw: Struct containing variables accessed by shared code * ***************************************************************************/ -static void -e1000_release_software_flag(struct e1000_hw *hw) +static void e1000_release_software_flag(struct e1000_hw *hw) { u32 extcnf_ctrl; DEBUGFUNC("e1000_release_software_flag"); if (hw->mac_type == e1000_ich8lan) { - extcnf_ctrl= E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl= er32(EXTCNF_CTRL); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; - E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); + ew32(EXTCNF_CTRL, extcnf_ctrl); } return; @@ -8388,9 +8231,8 @@ e1000_release_software_flag(struct e1000_hw *hw) * data - word read from the EEPROM * words - number of words to read *****************************************************************************/ -static s32 -e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) +static s32 e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { s32 error = E1000_SUCCESS; u32 flash_bank = 0; @@ -8405,7 +8247,7 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, * to be updated with each read. */ /* Value of bit 22 corresponds to the flash bank we're on. */ - flash_bank = (E1000_READ_REG(hw, EECD) & E1000_EECD_SEC1VAL) ? 1 : 0; + flash_bank = (er32(EECD) & E1000_EECD_SEC1VAL) ? 1 : 0; /* Adjust offset appropriately if we're on bank 1 - adjust for word size */ bank_offset = flash_bank * (hw->flash_bank_size * 2); @@ -8444,9 +8286,8 @@ e1000_read_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, * words - number of words to write * data - words to write to the EEPROM *****************************************************************************/ -static s32 -e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) +static s32 e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) { u32 i = 0; s32 error = E1000_SUCCESS; @@ -8491,8 +8332,7 @@ e1000_write_eeprom_ich8(struct e1000_hw *hw, u16 offset, u16 words, * * hw - The pointer to the hw structure ****************************************************************************/ -static s32 -e1000_ich8_cycle_init(struct e1000_hw *hw) +static s32 e1000_ich8_cycle_init(struct e1000_hw *hw) { union ich8_hws_flash_status hsfsts; s32 error = E1000_ERR_EEPROM; @@ -8558,8 +8398,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) * * hw - The pointer to the hw structure ****************************************************************************/ -static s32 -e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout) +static s32 e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout) { union ich8_hws_flash_ctrl hsflctl; union ich8_hws_flash_status hsfsts; @@ -8593,9 +8432,8 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, u32 timeout) * size - Size of data to read, 1=byte 2=word * data - Pointer to the word to store the value read. *****************************************************************************/ -static s32 -e1000_read_ich8_data(struct e1000_hw *hw, u32 index, - u32 size, u16* data) +static s32 e1000_read_ich8_data(struct e1000_hw *hw, u32 index, u32 size, + u16 *data) { union ich8_hws_flash_status hsfsts; union ich8_hws_flash_ctrl hsflctl; @@ -8672,9 +8510,8 @@ e1000_read_ich8_data(struct e1000_hw *hw, u32 index, * size - Size of data to read, 1=byte 2=word * data - The byte(s) to write to the NVM. *****************************************************************************/ -static s32 -e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, - u16 data) +static s32 e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, + u16 data) { union ich8_hws_flash_status hsfsts; union ich8_hws_flash_ctrl hsflctl; @@ -8747,8 +8584,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, u32 index, u32 size, * index - The index of the byte to read. * data - Pointer to a byte to store the value read. *****************************************************************************/ -static s32 -e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8* data) +static s32 e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8 *data) { s32 status = E1000_SUCCESS; u16 word = 0; @@ -8770,8 +8606,7 @@ e1000_read_ich8_byte(struct e1000_hw *hw, u32 index, u8* data) * index - The index of the byte to write. * byte - The byte to write to the NVM. *****************************************************************************/ -static s32 -e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte) +static s32 e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte) { s32 error = E1000_SUCCESS; s32 program_retries = 0; @@ -8803,8 +8638,7 @@ e1000_verify_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 byte) * index - The index of the byte to read. * data - The byte to write to the NVM. *****************************************************************************/ -static s32 -e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data) +static s32 e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data) { s32 status = E1000_SUCCESS; u16 word = (u16)data; @@ -8821,8 +8655,7 @@ e1000_write_ich8_byte(struct e1000_hw *hw, u32 index, u8 data) * index - The starting byte index of the word to read. * data - Pointer to a word to store the value read. *****************************************************************************/ -static s32 -e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data) +static s32 e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data) { s32 status = E1000_SUCCESS; status = e1000_read_ich8_data(hw, index, 2, data); @@ -8840,8 +8673,7 @@ e1000_read_ich8_word(struct e1000_hw *hw, u32 index, u16 *data) * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the * bank size may be 4, 8 or 64 KBytes *****************************************************************************/ -static s32 -e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank) +static s32 e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank) { union ich8_hws_flash_status hsfsts; union ich8_hws_flash_ctrl hsflctl; @@ -8930,9 +8762,9 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, u32 bank) return error; } -static s32 -e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, - u32 cnf_base_addr, u32 cnf_size) +static s32 e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, + u32 cnf_base_addr, + u32 cnf_size) { u32 ret_val = E1000_SUCCESS; u16 word_addr, reg_data, reg_addr; @@ -8972,8 +8804,7 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, * * hw: Struct containing variables accessed by shared code *****************************************************************************/ -static s32 -e1000_init_lcd_from_nvm(struct e1000_hw *hw) +static s32 e1000_init_lcd_from_nvm(struct e1000_hw *hw) { u32 reg_data, cnf_base_addr, cnf_size, ret_val, loop; @@ -8981,32 +8812,32 @@ e1000_init_lcd_from_nvm(struct e1000_hw *hw) return E1000_SUCCESS; /* Check if SW needs configure the PHY */ - reg_data = E1000_READ_REG(hw, FEXTNVM); + reg_data = er32(FEXTNVM); if (!(reg_data & FEXTNVM_SW_CONFIG)) return E1000_SUCCESS; /* Wait for basic configuration completes before proceeding*/ loop = 0; do { - reg_data = E1000_READ_REG(hw, STATUS) & E1000_STATUS_LAN_INIT_DONE; + reg_data = er32(STATUS) & E1000_STATUS_LAN_INIT_DONE; udelay(100); loop++; } while ((!reg_data) && (loop < 50)); /* Clear the Init Done bit for the next init event */ - reg_data = E1000_READ_REG(hw, STATUS); + reg_data = er32(STATUS); reg_data &= ~E1000_STATUS_LAN_INIT_DONE; - E1000_WRITE_REG(hw, STATUS, reg_data); + ew32(STATUS, reg_data); /* Make sure HW does not configure LCD from PHY extended configuration before SW configuration */ - reg_data = E1000_READ_REG(hw, EXTCNF_CTRL); + reg_data = er32(EXTCNF_CTRL); if ((reg_data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE) == 0x0000) { - reg_data = E1000_READ_REG(hw, EXTCNF_SIZE); + reg_data = er32(EXTCNF_SIZE); cnf_size = reg_data & E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH; cnf_size >>= 16; if (cnf_size) { - reg_data = E1000_READ_REG(hw, EXTCNF_CTRL); + reg_data = er32(EXTCNF_CTRL); cnf_base_addr = reg_data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER; /* cnf_base_addr is in DWORD */ cnf_base_addr >>= 16; |