diff options
Diffstat (limited to 'drivers/net/e1000')
| -rw-r--r-- | drivers/net/e1000/LICENSE | 339 | ||||
| -rw-r--r-- | drivers/net/e1000/Makefile | 35 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000.h | 76 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000_ethtool.c | 191 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000_hw.c | 1185 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000_hw.h | 174 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000_main.c | 792 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000_osdep.h | 44 | ||||
| -rw-r--r-- | drivers/net/e1000/e1000_param.c | 145 |
9 files changed, 1458 insertions, 1523 deletions
diff --git a/drivers/net/e1000/LICENSE b/drivers/net/e1000/LICENSE deleted file mode 100644 index 5f297e5bb46..00000000000 --- a/drivers/net/e1000/LICENSE +++ /dev/null @@ -1,339 +0,0 @@ - -"This software program is licensed subject to the GNU General Public License -(GPL). Version 2, June 1991, available at -<http://www.fsf.org/copyleft/gpl.html>" - -GNU General Public License - -Version 2, June 1991 - -Copyright (C) 1989, 1991 Free Software Foundation, Inc. -59 Temple Place - Suite 330, Boston, MA 02111-1307, USA - -Everyone is permitted to copy and distribute verbatim copies of this license -document, but changing it is not allowed. - -Preamble - -The licenses for most software are designed to take away your freedom to -share and change it. By contrast, the GNU General Public License is intended -to guarantee your freedom to share and change free software--to make sure -the software is free for all its users. This General Public License applies -to most of the Free Software Foundation's software and to any other program -whose authors commit to using it. (Some other Free Software Foundation -software is covered by the GNU Library General Public License instead.) You -can apply it to your programs, too. - -When we speak of free software, we are referring to freedom, not price. Our -General Public Licenses are designed to make sure that you have the freedom -to distribute copies of free software (and charge for this service if you -wish), that you receive source code or can get it if you want it, that you -can change the software or use pieces of it in new free programs; and that -you know you can do these things. - -To protect your rights, we need to make restrictions that forbid anyone to -deny you these rights or to ask you to surrender the rights. These -restrictions translate to certain responsibilities for you if you distribute -copies of the software, or if you modify it. - -For example, if you distribute copies of such a program, whether gratis or -for a fee, you must give the recipients all the rights that you have. You -must make sure that they, too, receive or can get the source code. And you -must show them these terms so they know their rights. - -We protect your rights with two steps: (1) copyright the software, and (2) -offer you this license which gives you legal permission to copy, distribute -and/or modify the software. - -Also, for each author's protection and ours, we want to make certain that -everyone understands that there is no warranty for this free software. If -the software is modified by someone else and passed on, we want its -recipients to know that what they have is not the original, so that any -problems introduced by others will not reflect on the original authors' -reputations. - -Finally, any free program is threatened constantly by software patents. We -wish to avoid the danger that redistributors of a free program will -individually obtain patent licenses, in effect making the program -proprietary. To prevent this, we have made it clear that any patent must be -licensed for everyone's free use or not licensed at all. - -The precise terms and conditions for copying, distribution and modification -follow. - -TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - -0. This License applies to any program or other work which contains a notice - placed by the copyright holder saying it may be distributed under the - terms of this General Public License. The "Program", below, refers to any - such program or work, and a "work based on the Program" means either the - Program or any derivative work under copyright law: that is to say, a - work containing the Program or a portion of it, either verbatim or with - modifications and/or translated into another language. (Hereinafter, - translation is included without limitation in the term "modification".) - Each licensee is addressed as "you". - - Activities other than copying, distribution and modification are not - covered by this License; they are outside its scope. The act of running - the Program is not restricted, and the output from the Program is covered - only if its contents constitute a work based on the Program (independent - of having been made by running the Program). Whether that is true depends - on what the Program does. - -1. You may copy and distribute verbatim copies of the Program's source code - as you receive it, in any medium, provided that you conspicuously and - appropriately publish on each copy an appropriate copyright notice and - disclaimer of warranty; keep intact all the notices that refer to this - License and to the absence of any warranty; and give any other recipients - of the Program a copy of this License along with the Program. - - You may charge a fee for the physical act of transferring a copy, and you - may at your option offer warranty protection in exchange for a fee. - -2. You may modify your copy or copies of the Program or any portion of it, - thus forming a work based on the Program, and copy and distribute such - modifications or work under the terms of Section 1 above, provided that - you also meet all of these conditions: - - * a) You must cause the modified files to carry prominent notices stating - that you changed the files and the date of any change. - - * b) You must cause any work that you distribute or publish, that in - whole or in part contains or is derived from the Program or any part - thereof, to be licensed as a whole at no charge to all third parties - under the terms of this License. - - * c) If the modified program normally reads commands interactively when - run, you must cause it, when started running for such interactive - use in the most ordinary way, to print or display an announcement - including an appropriate copyright notice and a notice that there is - no warranty (or else, saying that you provide a warranty) and that - users may redistribute the program under these conditions, and - telling the user how to view a copy of this License. (Exception: if - the Program itself is interactive but does not normally print such - an announcement, your work based on the Program is not required to - print an announcement.) - - These requirements apply to the modified work as a whole. If identifiable - sections of that work are not derived from the Program, and can be - reasonably considered independent and separate works in themselves, then - this License, and its terms, do not apply to those sections when you - distribute them as separate works. But when you distribute the same - sections as part of a whole which is a work based on the Program, the - distribution of the whole must be on the terms of this License, whose - permissions for other licensees extend to the entire whole, and thus to - each and every part regardless of who wrote it. - - Thus, it is not the intent of this section to claim rights or contest - your rights to work written entirely by you; rather, the intent is to - exercise the right to control the distribution of derivative or - collective works based on the Program. - - In addition, mere aggregation of another work not based on the Program - with the Program (or with a work based on the Program) on a volume of a - storage or distribution medium does not bring the other work under the - scope of this License. - -3. You may copy and distribute the Program (or a work based on it, under - Section 2) in object code or executable form under the terms of Sections - 1 and 2 above provided that you also do one of the following: - - * a) Accompany it with the complete corresponding machine-readable source - code, which must be distributed under the terms of Sections 1 and 2 - above on a medium customarily used for software interchange; or, - - * b) Accompany it with a written offer, valid for at least three years, - to give any third party, for a charge no more than your cost of - physically performing source distribution, a complete machine- - readable copy of the corresponding source code, to be distributed - under the terms of Sections 1 and 2 above on a medium customarily - used for software interchange; or, - - * c) Accompany it with the information you received as to the offer to - distribute corresponding source code. (This alternative is allowed - only for noncommercial distribution and only if you received the - program in object code or executable form with such an offer, in - accord with Subsection b above.) - - The source code for a work means the preferred form of the work for - making modifications to it. For an executable work, complete source code - means all the source code for all modules it contains, plus any - associated interface definition files, plus the scripts used to control - compilation and installation of the executable. However, as a special - exception, the source code distributed need not include anything that is - normally distributed (in either source or binary form) with the major - components (compiler, kernel, and so on) of the operating system on which - the executable runs, unless that component itself accompanies the - executable. - - If distribution of executable or object code is made by offering access - to copy from a designated place, then offering equivalent access to copy - the source code from the same place counts as distribution of the source - code, even though third parties are not compelled to copy the source - along with the object code. - -4. You may not copy, modify, sublicense, or distribute the Program except as - expressly provided under this License. Any attempt otherwise to copy, - modify, sublicense or distribute the Program is void, and will - automatically terminate your rights under this License. However, parties - who have received copies, or rights, from you under this License will not - have their licenses terminated so long as such parties remain in full - compliance. - -5. You are not required to accept this License, since you have not signed - it. However, nothing else grants you permission to modify or distribute - the Program or its derivative works. These actions are prohibited by law - if you do not accept this License. Therefore, by modifying or - distributing the Program (or any work based on the Program), you - indicate your acceptance of this License to do so, and all its terms and - conditions for copying, distributing or modifying the Program or works - based on it. - -6. Each time you redistribute the Program (or any work based on the - Program), the recipient automatically receives a license from the - original licensor to copy, distribute or modify the Program subject to - these terms and conditions. You may not impose any further restrictions - on the recipients' exercise of the rights granted herein. You are not - responsible for enforcing compliance by third parties to this License. - -7. If, as a consequence of a court judgment or allegation of patent - infringement or for any other reason (not limited to patent issues), - conditions are imposed on you (whether by court order, agreement or - otherwise) that contradict the conditions of this License, they do not - excuse you from the conditions of this License. If you cannot distribute - so as to satisfy simultaneously your obligations under this License and - any other pertinent obligations, then as a consequence you may not - distribute the Program at all. For example, if a patent license would - not permit royalty-free redistribution of the Program by all those who - receive copies directly or indirectly through you, then the only way you - could satisfy both it and this License would be to refrain entirely from - distribution of the Program. - - If any portion of this section is held invalid or unenforceable under any - particular circumstance, the balance of the section is intended to apply - and the section as a whole is intended to apply in other circumstances. - - It is not the purpose of this section to induce you to infringe any - patents or other property right claims or to contest validity of any - such claims; this section has the sole purpose of protecting the - integrity of the free software distribution system, which is implemented - by public license practices. Many people have made generous contributions - to the wide range of software distributed through that system in - reliance on consistent application of that system; it is up to the - author/donor to decide if he or she is willing to distribute software - through any other system and a licensee cannot impose that choice. - - This section is intended to make thoroughly clear what is believed to be - a consequence of the rest of this License. - -8. If the distribution and/or use of the Program is restricted in certain - countries either by patents or by copyrighted interfaces, the original - copyright holder who places the Program under this License may add an - explicit geographical distribution limitation excluding those countries, - so that distribution is permitted only in or among countries not thus - excluded. In such case, this License incorporates the limitation as if - written in the body of this License. - -9. The Free Software Foundation may publish revised and/or new versions of - the General Public License from time to time. Such new versions will be - similar in spirit to the present version, but may differ in detail to - address new problems or concerns. - - Each version is given a distinguishing version number. If the Program - specifies a version number of this License which applies to it and "any - later version", you have the option of following the terms and - conditions either of that version or of any later version published by - the Free Software Foundation. If the Program does not specify a version - number of this License, you may choose any version ever published by the - Free Software Foundation. - -10. If you wish to incorporate parts of the Program into other free programs - whose distribution conditions are different, write to the author to ask - for permission. For software which is copyrighted by the Free Software - Foundation, write to the Free Software Foundation; we sometimes make - exceptions for this. Our decision will be guided by the two goals of - preserving the free status of all derivatives of our free software and - of promoting the sharing and reuse of software generally. - - NO WARRANTY - -11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY - FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN - OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES - PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER - EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED - WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE - ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH - YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL - NECESSARY SERVICING, REPAIR OR CORRECTION. - -12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING - WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR - REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR - DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL - DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM - (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED - INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF - THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR - OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. - -END OF TERMS AND CONDITIONS - -How to Apply These Terms to Your New Programs - -If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it free -software which everyone can redistribute and change under these terms. - -To do so, attach the following notices to the program. It is safest to -attach them to the start of each source file to most effectively convey the -exclusion of warranty; and each file should have at least the "copyright" -line and a pointer to where the full notice is found. - -one line to give the program's name and an idea of what it does. -Copyright (C) yyyy name of author - -This program is free software; you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the Free -Software Foundation; either version 2 of the License, or (at your option) -any later version. - -This program is distributed in the hope that it will be useful, but WITHOUT -ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for -more details. - -You should have received a copy of the GNU General Public License along with -this program; if not, write to the Free Software Foundation, Inc., 59 -Temple Place - Suite 330, Boston, MA 02111-1307, USA. - -Also add information on how to contact you by electronic and paper mail. - -If the program is interactive, make it output a short notice like this when -it starts in an interactive mode: - -Gnomovision version 69, Copyright (C) year name of author Gnomovision comes -with ABSOLUTELY NO WARRANTY; for details type 'show w'. This is free -software, and you are welcome to redistribute it under certain conditions; -type 'show c' for details. - -The hypothetical commands 'show w' and 'show c' should show the appropriate -parts of the General Public License. Of course, the commands you use may be -called something other than 'show w' and 'show c'; they could even be -mouse-clicks or menu items--whatever suits your program. - -You should also get your employer (if you work as a programmer) or your -school, if any, to sign a "copyright disclaimer" for the program, if -necessary. Here is a sample; alter the names: - -Yoyodyne, Inc., hereby disclaims all copyright interest in the program -'Gnomovision' (which makes passes at compilers) written by James Hacker. - -signature of Ty Coon, 1 April 1989 -Ty Coon, President of Vice - -This General Public License does not permit incorporating your program into -proprietary programs. If your program is a subroutine library, you may -consider it more useful to permit linking proprietary applications with the -library. If this is what you want to do, use the GNU Library General Public -License instead of this License. diff --git a/drivers/net/e1000/Makefile b/drivers/net/e1000/Makefile index 5dea2b7dea4..4a6ab152245 100644 --- a/drivers/net/e1000/Makefile +++ b/drivers/net/e1000/Makefile @@ -1,25 +1,24 @@ ################################################################################ # -# -# Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. -# -# This program is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by the Free -# Software Foundation; either version 2 of the License, or (at your option) -# any later version. -# -# This program is distributed in the hope that it will be useful, but WITHOUT -# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# Intel PRO/1000 Linux driver +# Copyright(c) 1999 - 2006 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for # more details. -# +# # You should have received a copy of the GNU General Public License along with -# this program; if not, write to the Free Software Foundation, Inc., 59 -# Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# The full GNU General Public License is included in this distribution in the -# file called LICENSE. -# +# this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# # Contact Information: # Linux NICS <linux.nics@intel.com> # e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 98afa9c2057..f091042b146 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -60,6 +59,9 @@ #include <linux/capability.h> #include <linux/in.h> #include <linux/ip.h> +#ifdef NETIF_F_TSO6 +#include <linux/ipv6.h> +#endif #include <linux/tcp.h> #include <linux/udp.h> #include <net/pkt_sched.h> @@ -255,6 +257,17 @@ struct e1000_adapter { spinlock_t tx_queue_lock; #endif atomic_t irq_sem; + unsigned int detect_link; + unsigned int total_tx_bytes; + unsigned int total_tx_packets; + unsigned int total_rx_bytes; + unsigned int total_rx_packets; + /* Interrupt Throttle Rate */ + uint32_t itr; + uint32_t itr_setting; + uint16_t tx_itr; + uint16_t rx_itr; + struct work_struct reset_task; uint8_t fc_autoneg; @@ -263,6 +276,7 @@ struct e1000_adapter { /* TX */ struct e1000_tx_ring *tx_ring; /* One per active queue */ + unsigned int restart_queue; unsigned long tx_queue_len; uint32_t txd_cmd; uint32_t tx_int_delay; @@ -311,8 +325,6 @@ struct e1000_adapter { uint64_t gorcl_old; uint16_t rx_ps_bsize0; - /* Interrupt Throttle Rate */ - uint32_t itr; /* OS defined structs */ struct net_device *netdev; @@ -346,29 +358,9 @@ struct e1000_adapter { }; enum e1000_state_t { - __E1000_DRIVER_TESTING, + __E1000_TESTING, __E1000_RESETTING, + __E1000_DOWN }; -/* e1000_main.c */ -extern char e1000_driver_name[]; -extern char e1000_driver_version[]; -int e1000_up(struct e1000_adapter *adapter); -void e1000_down(struct e1000_adapter *adapter); -void e1000_reset(struct e1000_adapter *adapter); -void e1000_reinit_locked(struct e1000_adapter *adapter); -int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); -void e1000_free_all_tx_resources(struct e1000_adapter *adapter); -int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); -void e1000_free_all_rx_resources(struct e1000_adapter *adapter); -void e1000_update_stats(struct e1000_adapter *adapter); -int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); - -/* e1000_ethtool.c */ -void e1000_set_ethtool_ops(struct net_device *netdev); - -/* e1000_param.c */ -void e1000_check_options(struct e1000_adapter *adapter); - - #endif /* _E1000_H_ */ diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index e39aa1fc4d1..da459f7177c 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -33,6 +32,21 @@ #include <asm/uaccess.h> +extern char e1000_driver_name[]; +extern char e1000_driver_version[]; + +extern int e1000_up(struct e1000_adapter *adapter); +extern void e1000_down(struct e1000_adapter *adapter); +extern void e1000_reinit_locked(struct e1000_adapter *adapter); +extern void e1000_reset(struct e1000_adapter *adapter); +extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); +extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); +extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); +extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter); +extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter); +extern void e1000_update_stats(struct e1000_adapter *adapter); + + struct e1000_stats { char stat_string[ETH_GSTRING_LEN]; int sizeof_stat; @@ -42,31 +56,36 @@ struct e1000_stats { #define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \ offsetof(struct e1000_adapter, m) static const struct e1000_stats e1000_gstrings_stats[] = { - { "rx_packets", E1000_STAT(net_stats.rx_packets) }, - { "tx_packets", E1000_STAT(net_stats.tx_packets) }, - { "rx_bytes", E1000_STAT(net_stats.rx_bytes) }, - { "tx_bytes", E1000_STAT(net_stats.tx_bytes) }, - { "rx_errors", E1000_STAT(net_stats.rx_errors) }, - { "tx_errors", E1000_STAT(net_stats.tx_errors) }, + { "rx_packets", E1000_STAT(stats.gprc) }, + { "tx_packets", E1000_STAT(stats.gptc) }, + { "rx_bytes", E1000_STAT(stats.gorcl) }, + { "tx_bytes", E1000_STAT(stats.gotcl) }, + { "rx_broadcast", E1000_STAT(stats.bprc) }, + { "tx_broadcast", E1000_STAT(stats.bptc) }, + { "rx_multicast", E1000_STAT(stats.mprc) }, + { "tx_multicast", E1000_STAT(stats.mptc) }, + { "rx_errors", E1000_STAT(stats.rxerrc) }, + { "tx_errors", E1000_STAT(stats.txerrc) }, { "tx_dropped", E1000_STAT(net_stats.tx_dropped) }, - { "multicast", E1000_STAT(net_stats.multicast) }, - { "collisions", E1000_STAT(net_stats.collisions) }, - { "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) }, + { "multicast", E1000_STAT(stats.mprc) }, + { "collisions", E1000_STAT(stats.colc) }, + { "rx_length_errors", E1000_STAT(stats.rlerrc) }, { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) }, - { "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) }, + { "rx_crc_errors", E1000_STAT(stats.crcerrs) }, { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) }, { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, - { "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) }, - { "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) }, - { "tx_carrier_errors", E1000_STAT(net_stats.tx_carrier_errors) }, + { "rx_missed_errors", E1000_STAT(stats.mpc) }, + { "tx_aborted_errors", E1000_STAT(stats.ecol) }, + { "tx_carrier_errors", E1000_STAT(stats.tncrs) }, { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) }, { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) }, - { "tx_window_errors", E1000_STAT(net_stats.tx_window_errors) }, + { "tx_window_errors", E1000_STAT(stats.latecol) }, { "tx_abort_late_coll", E1000_STAT(stats.latecol) }, { "tx_deferred_ok", E1000_STAT(stats.dc) }, { "tx_single_coll_ok", E1000_STAT(stats.scc) }, { "tx_multi_coll_ok", E1000_STAT(stats.mcc) }, { "tx_timeout_count", E1000_STAT(tx_timeout_count) }, + { "tx_restart_queue", E1000_STAT(restart_queue) }, { "rx_long_length_errors", E1000_STAT(stats.roc) }, { "rx_short_length_errors", E1000_STAT(stats.ruc) }, { "rx_align_errors", E1000_STAT(stats.algnerrc) }, @@ -115,9 +134,7 @@ e1000_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) if (hw->autoneg == 1) { ecmd->advertising |= ADVERTISED_Autoneg; - /* the e1000 autoneg seems to match ethtool nicely */ - ecmd->advertising |= hw->autoneg_advertised; } @@ -193,13 +210,9 @@ e1000_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd) ADVERTISED_FIBRE | ADVERTISED_Autoneg; else - hw->autoneg_advertised = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_1000baseT_Full| - ADVERTISED_Autoneg | - ADVERTISED_TP; + hw->autoneg_advertised = ecmd->advertising | + ADVERTISED_TP | + ADVERTISED_Autoneg; ecmd->advertising = hw->autoneg_advertised; } else if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) { @@ -229,11 +242,11 @@ e1000_get_pauseparam(struct net_device *netdev, pause->autoneg = (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE); - if (hw->fc == e1000_fc_rx_pause) + if (hw->fc == E1000_FC_RX_PAUSE) pause->rx_pause = 1; - else if (hw->fc == e1000_fc_tx_pause) + else if (hw->fc == E1000_FC_TX_PAUSE) pause->tx_pause = 1; - else if (hw->fc == e1000_fc_full) { + else if (hw->fc == E1000_FC_FULL) { pause->rx_pause = 1; pause->tx_pause = 1; } @@ -253,13 +266,13 @@ e1000_set_pauseparam(struct net_device *netdev, msleep(1); if (pause->rx_pause && pause->tx_pause) - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; else if (pause->rx_pause && !pause->tx_pause) - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; else if (!pause->rx_pause && pause->tx_pause) - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; else if (!pause->rx_pause && !pause->tx_pause) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; hw->original_fc = hw->fc; @@ -271,7 +284,7 @@ e1000_set_pauseparam(struct net_device *netdev, e1000_reset(adapter); } else retval = ((hw->media_type == e1000_media_type_fiber) ? - e1000_setup_link(hw) : e1000_force_mac_fc(hw)); + e1000_setup_link(hw) : e1000_force_mac_fc(hw)); clear_bit(__E1000_RESETTING, &adapter->flags); return retval; @@ -336,6 +349,13 @@ e1000_set_tso(struct net_device *netdev, uint32_t data) else netdev->features &= ~NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + if (data) + netdev->features |= NETIF_F_TSO6; + else + netdev->features &= ~NETIF_F_TSO6; +#endif + DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled"); adapter->tso_force = TRUE; return 0; @@ -447,7 +467,8 @@ e1000_get_regs(struct net_device *netdev, regs_buff[24] = (uint32_t)phy_data; /* phy local receiver status */ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */ if (hw->mac_type >= e1000_82540 && - hw->media_type == e1000_media_type_copper) { + hw->mac_type < e1000_82571 && + hw->media_type == e1000_media_type_copper) { regs_buff[26] = E1000_READ_REG(hw, MANC); } } @@ -632,8 +653,8 @@ e1000_set_ringparam(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); e1000_mac_type mac_type = adapter->hw.mac_type; - struct e1000_tx_ring *txdr, *tx_old, *tx_new; - struct e1000_rx_ring *rxdr, *rx_old, *rx_new; + struct e1000_tx_ring *txdr, *tx_old; + struct e1000_rx_ring *rxdr, *rx_old; int i, err, tx_ring_size, rx_ring_size; if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) @@ -651,23 +672,17 @@ e1000_set_ringparam(struct net_device *netdev, tx_old = adapter->tx_ring; rx_old = adapter->rx_ring; - adapter->tx_ring = kmalloc(tx_ring_size, GFP_KERNEL); - if (!adapter->tx_ring) { - err = -ENOMEM; - goto err_setup_rx; - } - memset(adapter->tx_ring, 0, tx_ring_size); + err = -ENOMEM; + txdr = kzalloc(tx_ring_size, GFP_KERNEL); + if (!txdr) + goto err_alloc_tx; - adapter->rx_ring = kmalloc(rx_ring_size, GFP_KERNEL); - if (!adapter->rx_ring) { - kfree(adapter->tx_ring); - err = -ENOMEM; - goto err_setup_rx; - } - memset(adapter->rx_ring, 0, rx_ring_size); + rxdr = kzalloc(rx_ring_size, GFP_KERNEL); + if (!rxdr) + goto err_alloc_rx; - txdr = adapter->tx_ring; - rxdr = adapter->rx_ring; + adapter->tx_ring = txdr; + adapter->rx_ring = rxdr; rxdr->count = max(ring->rx_pending,(uint32_t)E1000_MIN_RXD); rxdr->count = min(rxdr->count,(uint32_t)(mac_type < e1000_82544 ? @@ -694,16 +709,14 @@ e1000_set_ringparam(struct net_device *netdev, /* save the new, restore the old in order to free it, * then restore the new back again */ - rx_new = adapter->rx_ring; - tx_new = adapter->tx_ring; adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; e1000_free_all_rx_resources(adapter); e1000_free_all_tx_resources(adapter); kfree(tx_old); kfree(rx_old); - adapter->rx_ring = rx_new; - adapter->tx_ring = tx_new; + adapter->rx_ring = rxdr; + adapter->tx_ring = txdr; if ((err = e1000_up(adapter))) goto err_setup; } @@ -715,6 +728,10 @@ err_setup_tx: err_setup_rx: adapter->rx_ring = rx_old; adapter->tx_ring = tx_old; + kfree(rxdr); +err_alloc_rx: + kfree(txdr); +err_alloc_tx: e1000_up(adapter); err_setup: clear_bit(__E1000_RESETTING, &adapter->flags); @@ -763,7 +780,7 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) /* The status register is Read Only, so a write should fail. * Some bits that get toggled are ignored. */ - switch (adapter->hw.mac_type) { + switch (adapter->hw.mac_type) { /* there are several bits on newer hardware that are r/w */ case e1000_82571: case e1000_82572: @@ -791,12 +808,14 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) } /* restore previous status */ E1000_WRITE_REG(&adapter->hw, STATUS, before); + if (adapter->hw.mac_type != e1000_ich8lan) { REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF); } + REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF); REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF); @@ -809,8 +828,9 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF); REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000); + before = (adapter->hw.mac_type == e1000_ich8lan ? - 0x06C3B33E : 0x06DFB3FE); + 0x06C3B33E : 0x06DFB3FE); REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB); REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000); @@ -823,10 +843,10 @@ e1000_reg_test(struct e1000_adapter *adapter, uint64_t *data) REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF); REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF); value = (adapter->hw.mac_type == e1000_ich8lan ? - E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); + E1000_RAR_ENTRIES_ICH8LAN : E1000_RAR_ENTRIES); for (i = 0; i < value; i++) { REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF, - 0xFFFFFFFF); + 0xFFFFFFFF); } } else { @@ -872,9 +892,7 @@ e1000_eeprom_test(struct e1000_adapter *adapter, uint64_t *data) } static irqreturn_t -e1000_test_intr(int irq, - void *data, - struct pt_regs *regs) +e1000_test_intr(int irq, void *data) { struct net_device *netdev = (struct net_device *) data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -895,11 +913,11 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* NOTE: we don't test MSI interrupts here, yet */ /* Hook up test interrupt handler just for this test */ - if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, - netdev->name, netdev)) + if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, + netdev)) shared_int = FALSE; else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, - netdev->name, netdev)) { + netdev->name, netdev)) { *data = 1; return -1; } @@ -915,6 +933,7 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) if (adapter->hw.mac_type == e1000_ich8lan && i == 8) continue; + /* Interrupt to test */ mask = 1 << i; @@ -1610,7 +1629,7 @@ e1000_diag_test(struct net_device *netdev, struct e1000_adapter *adapter = netdev_priv(netdev); boolean_t if_running = netif_running(netdev); - set_bit(__E1000_DRIVER_TESTING, &adapter->flags); + set_bit(__E1000_TESTING, &adapter->flags); if (eth_test->flags == ETH_TEST_FL_OFFLINE) { /* Offline tests */ @@ -1655,7 +1674,7 @@ e1000_diag_test(struct net_device *netdev, adapter->hw.autoneg = autoneg; e1000_reset(adapter); - clear_bit(__E1000_DRIVER_TESTING, &adapter->flags); + clear_bit(__E1000_TESTING, &adapter->flags); if (if_running) dev_open(netdev); } else { @@ -1664,13 +1683,13 @@ e1000_diag_test(struct net_device *netdev, if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; - /* Offline tests aren't run; pass by default */ + /* Online tests aren't run; pass by default */ data[0] = 0; data[1] = 0; data[2] = 0; data[3] = 0; - clear_bit(__E1000_DRIVER_TESTING, &adapter->flags); + clear_bit(__E1000_TESTING, &adapter->flags); } msleep_interruptible(4 * 1000); } @@ -1681,6 +1700,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol int retval = 1; /* fail by default */ switch (hw->device_id) { + case E1000_DEV_ID_82542: case E1000_DEV_ID_82543GC_FIBER: case E1000_DEV_ID_82543GC_COPPER: case E1000_DEV_ID_82544EI_FIBER: @@ -1706,6 +1726,7 @@ static int e1000_wol_exclusion(struct e1000_adapter *adapter, struct ethtool_wol retval = 0; break; case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: /* quad port adapters only support WoL on port A */ if (!adapter->quad_port_a) { diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 10b8c8c2532..3655d902b0b 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -34,6 +33,63 @@ #include "e1000_hw.h" +static int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); +static void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); +static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *data); +static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); +static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +static void e1000_release_software_semaphore(struct e1000_hw *hw); + +static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); +static int32_t e1000_check_downshift(struct e1000_hw *hw); +static int32_t e1000_check_polarity(struct e1000_hw *hw, e1000_rev_polarity *polarity); +static void e1000_clear_hw_cntrs(struct e1000_hw *hw); +static void e1000_clear_vfta(struct e1000_hw *hw); +static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); +static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up); +static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); +static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); +static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank); +static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); +static int32_t e1000_get_cable_length(struct e1000_hw *hw, uint16_t *min_length, uint16_t *max_length); +static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); +static int32_t e1000_get_software_flag(struct e1000_hw *hw); +static int32_t e1000_ich8_cycle_init(struct e1000_hw *hw); +static int32_t e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout); +static int32_t e1000_id_led_init(struct e1000_hw *hw); +static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size); +static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); +static void e1000_init_rx_addrs(struct e1000_hw *hw); +static void e1000_initialize_hardware_bits(struct e1000_hw *hw); +static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); +static int32_t e1000_mng_enable_host_if(struct e1000_hw *hw); +static int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, uint16_t length, uint16_t offset, uint8_t *sum); +static int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, struct e1000_host_mng_command_header* hdr); +static int32_t e1000_mng_write_commit(struct e1000_hw *hw); +static int32_t e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static int32_t e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); +static int32_t e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); +static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t *data); +static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte); +static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte); +static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data); +static int32_t e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t *data); +static int32_t e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, uint16_t data); +static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +static void e1000_release_software_flag(struct e1000_hw *hw); +static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); +static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, uint32_t no_snoop); +static void e1000_set_pci_express_master_disable(struct e1000_hw *hw); +static int32_t e1000_wait_autoneg(struct e1000_hw *hw); +static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value); static int32_t e1000_set_phy_type(struct e1000_hw *hw); static void e1000_phy_init_script(struct e1000_hw *hw); static int32_t e1000_setup_copper_link(struct e1000_hw *hw); @@ -70,69 +126,10 @@ static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw); static int32_t e1000_set_phy_mode(struct e1000_hw *hw); static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer); static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length); -static uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); -static int32_t e1000_check_downshift(struct e1000_hw *hw); -static int32_t e1000_check_polarity(struct e1000_hw *hw, uint16_t *polarity); -static void e1000_clear_hw_cntrs(struct e1000_hw *hw); -static void e1000_clear_vfta(struct e1000_hw *hw); -static int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); -static int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, - boolean_t link_up); -static int32_t e1000_config_fc_after_link_up(struct e1000_hw *hw); -static int32_t e1000_detect_gig_phy(struct e1000_hw *hw); -static int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); -static int32_t e1000_get_cable_length(struct e1000_hw *hw, - uint16_t *min_length, - uint16_t *max_length); -static int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); -static int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); -static int32_t e1000_id_led_init(struct e1000_hw * hw); -static void e1000_init_rx_addrs(struct e1000_hw *hw); -static boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); -static int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); -static void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); -static int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); -static int32_t e1000_wait_autoneg(struct e1000_hw *hw); - -static void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, - uint32_t value); - -#define E1000_WRITE_REG_IO(a, reg, val) \ - e1000_write_reg_io((a), E1000_##reg, val) static int32_t e1000_configure_kmrn_for_10_100(struct e1000_hw *hw, uint16_t duplex); static int32_t e1000_configure_kmrn_for_1000(struct e1000_hw *hw); -static int32_t e1000_erase_ich8_4k_segment(struct e1000_hw *hw, - uint32_t segment); -static int32_t e1000_get_software_flag(struct e1000_hw *hw); -static int32_t e1000_get_software_semaphore(struct e1000_hw *hw); -static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw); -static int32_t e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw); -static int32_t e1000_read_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_read_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t* data); -static int32_t e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, - uint16_t *data); -static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, - uint16_t *data); -static void e1000_release_software_flag(struct e1000_hw *hw); -static void e1000_release_software_semaphore(struct e1000_hw *hw); -static int32_t e1000_set_pci_ex_no_snoop(struct e1000_hw *hw, - uint32_t no_snoop); -static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, - uint32_t index, uint8_t byte); -static int32_t e1000_write_eeprom_ich8(struct e1000_hw *hw, uint16_t offset, - uint16_t words, uint16_t *data); -static int32_t e1000_write_ich8_byte(struct e1000_hw *hw, uint32_t index, - uint8_t data); -static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, - uint16_t data); - /* IGP cable length table */ static const uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = @@ -156,13 +153,12 @@ uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, 124}; - /****************************************************************************** * Set the phy type member in the hw struct. * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +static int32_t e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); @@ -208,7 +204,6 @@ e1000_set_phy_type(struct e1000_hw *hw) return E1000_SUCCESS; } - /****************************************************************************** * IGP phy init script - initializes the GbE PHY * @@ -390,6 +385,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82571EB_FIBER: case E1000_DEV_ID_82571EB_SERDES: case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: hw->mac_type = e1000_82571; break; case E1000_DEV_ID_82572EI_COPPER: @@ -413,6 +409,8 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_ICH8_IGP_AMT: case E1000_DEV_ID_ICH8_IGP_C: case E1000_DEV_ID_ICH8_IFE: + case E1000_DEV_ID_ICH8_IFE_GT: + case E1000_DEV_ID_ICH8_IFE_G: case E1000_DEV_ID_ICH8_IGP_M: hw->mac_type = e1000_ich8lan; break; @@ -667,19 +665,12 @@ e1000_reset_hw(struct e1000_hw *hw) E1000_WRITE_FLUSH(hw); } /* fall through */ - case e1000_82571: - case e1000_82572: - case e1000_ich8lan: - case e1000_80003es2lan: + default: + /* Auto read done will delay 5ms or poll based on mac type */ ret_val = e1000_get_auto_rd_done(hw); if (ret_val) - /* We don't want to continue accessing MAC registers. */ return ret_val; break; - default: - /* Wait for EEPROM reload (it happens automatically) */ - msleep(5); - break; } /* Disable HW ARPs on ASF enabled adapters */ @@ -722,6 +713,123 @@ e1000_reset_hw(struct e1000_hw *hw) } /****************************************************************************** + * + * Initialize a number of hardware-dependent bits + * + * hw: Struct containing variables accessed by shared code + * + * This function contains hardware limitation workarounds for PCI-E adapters + * + *****************************************************************************/ +static void +e1000_initialize_hardware_bits(struct e1000_hw *hw) +{ + if ((hw->mac_type >= e1000_82571) && (!hw->initialize_hw_bits_disable)) { + /* Settings common to all PCI-express silicon */ + uint32_t reg_ctrl, reg_ctrl_ext; + uint32_t reg_tarc0, reg_tarc1; + uint32_t reg_tctl; + uint32_t reg_txdctl, reg_txdctl1; + + /* link autonegotiation/sync workarounds */ + reg_tarc0 = E1000_READ_REG(hw, TARC0); + reg_tarc0 &= ~((1 << 30)|(1 << 29)|(1 << 28)|(1 << 27)); + + /* Enable not-done TX descriptor counting */ + reg_txdctl = E1000_READ_REG(hw, TXDCTL); + reg_txdctl |= E1000_TXDCTL_COUNT_DESC; + E1000_WRITE_REG(hw, TXDCTL, reg_txdctl); + reg_txdctl1 = E1000_READ_REG(hw, TXDCTL1); + reg_txdctl1 |= E1000_TXDCTL_COUNT_DESC; + E1000_WRITE_REG(hw, TXDCTL1, reg_txdctl1); + + switch (hw->mac_type) { + case e1000_82571: + case e1000_82572: + /* Clear PHY TX compatible mode bits */ + reg_tarc1 = E1000_READ_REG(hw, TARC1); + reg_tarc1 &= ~((1 << 30)|(1 << 29)); + + /* link autonegotiation/sync workarounds */ + reg_tarc0 |= ((1 << 26)|(1 << 25)|(1 << 24)|(1 << 23)); + + /* TX ring control fixes */ + reg_tarc1 |= ((1 << 26)|(1 << 25)|(1 << 24)); + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + case e1000_82573: + reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext &= ~(1 << 23); + reg_ctrl_ext |= (1 << 22); + + /* TX byte count fix */ + reg_ctrl = E1000_READ_REG(hw, CTRL); + reg_ctrl &= ~(1 << 29); + + E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); + E1000_WRITE_REG(hw, CTRL, reg_ctrl); + break; + case e1000_80003es2lan: + /* improve small packet performace for fiber/serdes */ + if ((hw->media_type == e1000_media_type_fiber) || + (hw->media_type == e1000_media_type_internal_serdes)) { + reg_tarc0 &= ~(1 << 20); + } + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + reg_tarc1 = E1000_READ_REG(hw, TARC1); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + case e1000_ich8lan: + /* Reduce concurrent DMA requests to 3 from 4 */ + if ((hw->revision_id < 3) || + ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && + (hw->device_id != E1000_DEV_ID_ICH8_IGP_M))) + reg_tarc0 |= ((1 << 29)|(1 << 28)); + + reg_ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + reg_ctrl_ext |= (1 << 22); + E1000_WRITE_REG(hw, CTRL_EXT, reg_ctrl_ext); + + /* workaround TX hang with TSO=on */ + reg_tarc0 |= ((1 << 27)|(1 << 26)|(1 << 24)|(1 << 23)); + + /* Multiple read bit is reversed polarity */ + reg_tctl = E1000_READ_REG(hw, TCTL); + reg_tarc1 = E1000_READ_REG(hw, TARC1); + if (reg_tctl & E1000_TCTL_MULR) + reg_tarc1 &= ~(1 << 28); + else + reg_tarc1 |= (1 << 28); + + /* workaround TX hang with TSO=on */ + reg_tarc1 |= ((1 << 30)|(1 << 26)|(1 << 24)); + + E1000_WRITE_REG(hw, TARC1, reg_tarc1); + break; + default: + break; + } + + E1000_WRITE_REG(hw, TARC0, reg_tarc0); + } +} + +/****************************************************************************** * Performs basic configuration of the adapter. * * hw - Struct containing variables accessed by shared code @@ -749,14 +857,13 @@ e1000_init_hw(struct e1000_hw *hw) DEBUGFUNC("e1000_init_hw"); /* force full DMA clock frequency for 10/100 on ICH8 A0-B0 */ - if (hw->mac_type == e1000_ich8lan) { - reg_data = E1000_READ_REG(hw, TARC0); - reg_data |= 0x30000000; - E1000_WRITE_REG(hw, TARC0, reg_data); - - reg_data = E1000_READ_REG(hw, STATUS); - reg_data &= ~0x80000000; - E1000_WRITE_REG(hw, STATUS, reg_data); + if ((hw->mac_type == e1000_ich8lan) && + ((hw->revision_id < 3) || + ((hw->device_id != E1000_DEV_ID_ICH8_IGP_M_AMT) && + (hw->device_id != E1000_DEV_ID_ICH8_IGP_M)))) { + reg_data = E1000_READ_REG(hw, STATUS); + reg_data &= ~0x80000000; + E1000_WRITE_REG(hw, STATUS, reg_data); } /* Initialize Identification LED */ @@ -769,6 +876,9 @@ e1000_init_hw(struct e1000_hw *hw) /* Set the media type and TBI compatibility */ e1000_set_media_type(hw); + /* Must be called after e1000_set_media_type because media_type is used */ + e1000_initialize_hardware_bits(hw); + /* Disabling VLAN filtering. */ DEBUGOUT("Initializing the IEEE VLAN\n"); /* VET hardcoded to standard value and VFTA removed in ICH8 LAN */ @@ -860,17 +970,6 @@ e1000_init_hw(struct e1000_hw *hw) if (hw->mac_type > e1000_82544) { ctrl = E1000_READ_REG(hw, TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - switch (hw->mac_type) { - default: - break; - case e1000_82571: - case e1000_82572: - case e1000_82573: - case e1000_ich8lan: - case e1000_80003es2lan: - ctrl |= E1000_TXDCTL_COUNT_DESC; - break; - } E1000_WRITE_REG(hw, TXDCTL, ctrl); } @@ -908,8 +1007,6 @@ e1000_init_hw(struct e1000_hw *hw) case e1000_ich8lan: ctrl = E1000_READ_REG(hw, TXDCTL1); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; - if (hw->mac_type >= e1000_82571) - ctrl |= E1000_TXDCTL_COUNT_DESC; E1000_WRITE_REG(hw, TXDCTL1, ctrl); break; } @@ -1018,11 +1115,11 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if (hw->fc == e1000_fc_default) { + if (hw->fc == E1000_FC_DEFAULT) { switch (hw->mac_type) { case e1000_ich8lan: case e1000_82573: - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; break; default: ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, @@ -1032,12 +1129,12 @@ e1000_setup_link(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == EEPROM_WORD0F_ASM_DIR) - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; else - hw->fc = e1000_fc_full; + hw->fc = E1000_FC_FULL; break; } } @@ -1047,10 +1144,10 @@ e1000_setup_link(struct e1000_hw *hw) * hub or switch with different Flow Control capabilities. */ if (hw->mac_type == e1000_82542_rev2_0) - hw->fc &= (~e1000_fc_tx_pause); + hw->fc &= (~E1000_FC_TX_PAUSE); if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1)) - hw->fc &= (~e1000_fc_rx_pause); + hw->fc &= (~E1000_FC_RX_PAUSE); hw->original_fc = hw->fc; @@ -1102,7 +1199,7 @@ e1000_setup_link(struct e1000_hw *hw) * ability to transmit pause frames in not enabled, then these * registers will be set to 0. */ - if (!(hw->fc & e1000_fc_tx_pause)) { + if (!(hw->fc & E1000_FC_TX_PAUSE)) { E1000_WRITE_REG(hw, FCRTL, 0); E1000_WRITE_REG(hw, FCRTH, 0); } else { @@ -1149,11 +1246,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) E1000_WRITE_REG(hw, SCTL, E1000_DISABLE_SERDES_LOOPBACK); - /* On adapters with a MAC newer than 82544, SW Defineable pin 1 will be + /* On adapters with a MAC newer than 82544, SWDP 1 will be * set when the optics detect a signal. On older adapters, it will be * cleared when there is a signal. This applies to fiber media only. - * If we're on serdes media, adjust the output amplitude to value set in - * the EEPROM. + * If we're on serdes media, adjust the output amplitude to value + * set in the EEPROM. */ ctrl = E1000_READ_REG(hw, CTRL); if (hw->media_type == e1000_media_type_fiber) @@ -1189,11 +1286,11 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) * 3: Both Rx and TX flow control (symmetric) are enabled. */ switch (hw->fc) { - case e1000_fc_none: + case E1000_FC_NONE: /* Flow control is completely disabled by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); break; - case e1000_fc_rx_pause: + case E1000_FC_RX_PAUSE: /* RX Flow control is enabled and TX Flow control is disabled by a * software over-ride. Since there really isn't a way to advertise * that we are capable of RX Pause ONLY, we will advertise that we @@ -1202,13 +1299,13 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; - case e1000_fc_tx_pause: + case E1000_FC_TX_PAUSE: /* TX Flow control is enabled, and RX Flow control is disabled, by a * software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR); break; - case e1000_fc_full: + case E1000_FC_FULL: /* Flow control (both RX and TX) is enabled by a software over-ride. */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; @@ -2124,13 +2221,13 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) * in the EEPROM is used. */ switch (hw->fc) { - case e1000_fc_none: /* 0 */ + case E1000_FC_NONE: /* 0 */ /* Flow control (RX & TX) is completely disabled by a * software over-ride. */ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; - case e1000_fc_rx_pause: /* 1 */ + case E1000_FC_RX_PAUSE: /* 1 */ /* RX Flow control is enabled, and TX Flow control is * disabled, by a software over-ride. */ @@ -2142,14 +2239,14 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) */ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; - case e1000_fc_tx_pause: /* 2 */ + case E1000_FC_TX_PAUSE: /* 2 */ /* TX Flow control is enabled, and RX Flow control is * disabled, by a software over-ride. */ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR; mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE; break; - case e1000_fc_full: /* 3 */ + case E1000_FC_FULL: /* 3 */ /* Flow control (both RX and TX) is enabled by a software * over-ride. */ @@ -2193,7 +2290,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_force_speed_duplex"); /* Turn off Flow control if we are forcing speed and duplex. */ - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; DEBUGOUT1("hw->fc = %d\n", hw->fc); @@ -2273,6 +2370,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) /* Need to reset the PHY or these changes will be ignored */ mii_ctrl_reg |= MII_CR_RESET; + /* Disable MDI-X support for 10/100 */ } else if (hw->phy_type == e1000_phy_ife) { ret_val = e1000_read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, &phy_data); @@ -2285,6 +2383,7 @@ e1000_phy_force_speed_duplex(struct e1000_hw *hw) ret_val = e1000_write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, phy_data); if (ret_val) return ret_val; + } else { /* Clear Auto-Crossover to force MDI manually. IGP requires MDI * forced whenever speed or duplex are forced. @@ -2547,18 +2646,18 @@ e1000_force_mac_fc(struct e1000_hw *hw) */ switch (hw->fc) { - case e1000_fc_none: + case E1000_FC_NONE: ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE)); break; - case e1000_fc_rx_pause: + case E1000_FC_RX_PAUSE: ctrl &= (~E1000_CTRL_TFCE); ctrl |= E1000_CTRL_RFCE; break; - case e1000_fc_tx_pause: + case E1000_FC_TX_PAUSE: ctrl &= (~E1000_CTRL_RFCE); ctrl |= E1000_CTRL_TFCE; break; - case e1000_fc_full: + case E1000_FC_FULL: ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: @@ -2657,14 +2756,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution *-------|---------|-------|---------|-------------------- - * 0 | 0 | DC | DC | e1000_fc_none - * 0 | 1 | 0 | DC | e1000_fc_none - * 0 | 1 | 1 | 0 | e1000_fc_none - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * 1 | 0 | 0 | DC | e1000_fc_none - * 1 | DC | 1 | DC | e1000_fc_full - * 1 | 1 | 0 | 0 | e1000_fc_none - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * 0 | 0 | DC | DC | E1000_FC_NONE + * 0 | 1 | 0 | DC | E1000_FC_NONE + * 0 | 1 | 1 | 0 | E1000_FC_NONE + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE + * 1 | 0 | 0 | DC | E1000_FC_NONE + * 1 | DC | 1 | DC | E1000_FC_FULL + * 1 | 1 | 0 | 0 | E1000_FC_NONE + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ /* Are both PAUSE bits set to 1? If so, this implies @@ -2676,7 +2775,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 1 | DC | 1 | DC | e1000_fc_full + * 1 | DC | 1 | DC | E1000_FC_FULL * */ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && @@ -2687,11 +2786,11 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * ONLY. Hence, we must now check to see if we need to * turn OFF the TRANSMISSION of PAUSE frames. */ - if (hw->original_fc == e1000_fc_full) { - hw->fc = e1000_fc_full; + if (hw->original_fc == E1000_FC_FULL) { + hw->fc = E1000_FC_FULL; DEBUGOUT("Flow Control = FULL.\n"); } else { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } } @@ -2700,14 +2799,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 0 | 1 | 1 | 1 | e1000_fc_tx_pause + * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE * */ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = e1000_fc_tx_pause; + hw->fc = E1000_FC_TX_PAUSE; DEBUGOUT("Flow Control = TX PAUSE frames only.\n"); } /* For transmitting PAUSE frames ONLY. @@ -2715,14 +2814,14 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * LOCAL DEVICE | LINK PARTNER * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- - * 1 | 1 | 0 | 1 | e1000_fc_rx_pause + * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE * */ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } /* Per the IEEE spec, at this point flow control should be @@ -2745,13 +2844,13 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) * be asked to delay transmission of packets than asking * our link partner to pause transmission of frames. */ - else if ((hw->original_fc == e1000_fc_none || - hw->original_fc == e1000_fc_tx_pause) || + else if ((hw->original_fc == E1000_FC_NONE || + hw->original_fc == E1000_FC_TX_PAUSE) || hw->fc_strict_ieee) { - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; DEBUGOUT("Flow Control = NONE.\n"); } else { - hw->fc = e1000_fc_rx_pause; + hw->fc = E1000_FC_RX_PAUSE; DEBUGOUT("Flow Control = RX PAUSE frames only.\n"); } @@ -2766,7 +2865,7 @@ e1000_config_fc_after_link_up(struct e1000_hw *hw) } if (duplex == HALF_DUPLEX) - hw->fc = e1000_fc_none; + hw->fc = E1000_FC_NONE; /* Now we call a subroutine to actually force the MAC * controller to use the correct flow control settings. @@ -3417,9 +3516,8 @@ e1000_read_phy_reg(struct e1000_hw *hw, return ret_val; } -int32_t -e1000_read_phy_reg_ex(struct e1000_hw *hw, - uint32_t reg_addr, +static int32_t +e1000_read_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data) { uint32_t i; @@ -3499,8 +3597,7 @@ e1000_read_phy_reg_ex(struct e1000_hw *hw, * data - data to write to the PHY ******************************************************************************/ int32_t -e1000_write_phy_reg(struct e1000_hw *hw, - uint32_t reg_addr, +e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t phy_data) { uint32_t ret_val; @@ -3557,10 +3654,9 @@ e1000_write_phy_reg(struct e1000_hw *hw, return ret_val; } -int32_t -e1000_write_phy_reg_ex(struct e1000_hw *hw, - uint32_t reg_addr, - uint16_t phy_data) +static int32_t +e1000_write_phy_reg_ex(struct e1000_hw *hw, uint32_t reg_addr, + uint16_t phy_data) { uint32_t i; uint32_t mdic = 0; @@ -3711,7 +3807,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) swfw = E1000_SWFW_PHY0_SM; } if (e1000_swfw_sync_acquire(hw, swfw)) { - e1000_release_software_semaphore(hw); + DEBUGOUT("Unable to acquire swfw sync\n"); return -E1000_ERR_SWFW_SYNC; } /* Read the device control register and assert the E1000_CTRL_PHY_RST @@ -3734,6 +3830,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) if (hw->mac_type >= e1000_82571) mdelay(10); + e1000_swfw_sync_release(hw, swfw); } else { /* Read the Extended Device Control Register, assert the PHY_RESET_DIR @@ -3776,7 +3873,7 @@ e1000_phy_hw_reset(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code * -* Sets bit 15 of the MII Control regiser +* Sets bit 15 of the MII Control register ******************************************************************************/ int32_t e1000_phy_reset(struct e1000_hw *hw) @@ -3792,15 +3889,14 @@ e1000_phy_reset(struct e1000_hw *hw) if (ret_val) return E1000_SUCCESS; - switch (hw->mac_type) { - case e1000_82541_rev_2: - case e1000_82571: - case e1000_82572: - case e1000_ich8lan: + switch (hw->phy_type) { + case e1000_phy_igp: + case e1000_phy_igp_2: + case e1000_phy_igp_3: + case e1000_phy_ife: ret_val = e1000_phy_hw_reset(hw); if (ret_val) return ret_val; - break; default: ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); @@ -3849,14 +3945,15 @@ e1000_phy_powerdown_workaround(struct e1000_hw *hw) E1000_WRITE_REG(hw, PHY_CTRL, reg | E1000_PHY_CTRL_GBE_DISABLE | E1000_PHY_CTRL_NOND0A_GBE_DISABLE); - /* Write VR power-down enable */ + /* Write VR power-down enable - bits 9:8 should be 10b */ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data | - IGP3_VR_CTRL_MODE_SHUT); + phy_data |= (1 << 9); + phy_data &= ~(1 << 8); + e1000_write_phy_reg(hw, IGP3_VR_CTRL, phy_data); /* Read it back and test */ e1000_read_phy_reg(hw, IGP3_VR_CTRL, &phy_data); - if ((phy_data & IGP3_VR_CTRL_MODE_SHUT) || retry) + if (((phy_data & IGP3_VR_CTRL_MODE_MASK) == IGP3_VR_CTRL_MODE_SHUT) || retry) break; /* Issue PHY reset and repeat at most one more time */ @@ -3936,7 +4033,7 @@ e1000_kumeran_lock_loss_workaround(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -int32_t +static int32_t e1000_detect_gig_phy(struct e1000_hw *hw) { int32_t phy_init_status, ret_val; @@ -3945,6 +4042,9 @@ e1000_detect_gig_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_detect_gig_phy"); + if (hw->phy_id != 0) + return E1000_SUCCESS; + /* The 82571 firmware may still be configuring the PHY. In this * case, we cannot access the PHY until the configuration is done. So * we explicitly set the PHY values. */ @@ -4061,7 +4161,8 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity, min_length, max_length, average; + uint16_t phy_data, min_length, max_length, average; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_igp_get_info"); @@ -4086,8 +4187,8 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = (phy_data & IGP01E1000_PSSR_MDIX) >> - IGP01E1000_PSSR_MDIX_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & IGP01E1000_PSSR_MDIX) >> + IGP01E1000_PSSR_MDIX_SHIFT); if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { @@ -4096,10 +4197,12 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT; - phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT; + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; /* Get cable length */ ret_val = e1000_get_cable_length(hw, &min_length, &max_length); @@ -4135,7 +4238,8 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity; + uint16_t phy_data; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_ife_get_info"); @@ -4146,8 +4250,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; phy_info->polarity_correction = - (phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> - IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT; + ((phy_data & IFE_PSC_AUTO_POLARITY_DISABLE) >> + IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT) ? + e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; if (phy_info->polarity_correction == e1000_polarity_reversal_enabled) { ret_val = e1000_check_polarity(hw, &polarity); @@ -4155,8 +4260,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, return ret_val; } else { /* Polarity is forced. */ - polarity = (phy_data & IFE_PSC_FORCE_POLARITY) >> - IFE_PSC_FORCE_POLARITY_SHIFT; + polarity = ((phy_data & IFE_PSC_FORCE_POLARITY) >> + IFE_PSC_FORCE_POLARITY_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } phy_info->cable_polarity = polarity; @@ -4164,9 +4270,9 @@ e1000_phy_ife_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = - (phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> - IFE_PMC_MDIX_MODE_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode) + ((phy_data & (IFE_PMC_AUTO_MDIX | IFE_PMC_FORCE_MDIX)) >> + IFE_PMC_MDIX_MODE_SHIFT); return E1000_SUCCESS; } @@ -4182,7 +4288,8 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info) { int32_t ret_val; - uint16_t phy_data, polarity; + uint16_t phy_data; + e1000_rev_polarity polarity; DEBUGFUNC("e1000_phy_m88_get_info"); @@ -4195,11 +4302,14 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, return ret_val; phy_info->extended_10bt_distance = - (phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> - M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT; + ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >> + M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ? + e1000_10bt_ext_dist_enable_lower : e1000_10bt_ext_dist_enable_normal; + phy_info->polarity_correction = - (phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> - M88E1000_PSCR_POLARITY_REVERSAL_SHIFT; + ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >> + M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ? + e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled; /* Check polarity status */ ret_val = e1000_check_polarity(hw, &polarity); @@ -4211,15 +4321,15 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->mdix_mode = (phy_data & M88E1000_PSSR_MDIX) >> - M88E1000_PSSR_MDIX_SHIFT; + phy_info->mdix_mode = (e1000_auto_x_mode)((phy_data & M88E1000_PSSR_MDIX) >> + M88E1000_PSSR_MDIX_SHIFT); if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) { /* Cable Length Estimation and Local/Remote Receiver Information * are only valid at 1000 Mbps. */ if (hw->phy_type != e1000_phy_gg82563) { - phy_info->cable_length = ((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> + phy_info->cable_length = (e1000_cable_length)((phy_data & M88E1000_PSSR_CABLE_LENGTH) >> M88E1000_PSSR_CABLE_LENGTH_SHIFT); } else { ret_val = e1000_read_phy_reg(hw, GG82563_PHY_DSP_DISTANCE, @@ -4227,18 +4337,20 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, if (ret_val) return ret_val; - phy_info->cable_length = phy_data & GG82563_DSPD_CABLE_LENGTH; + phy_info->cable_length = (e1000_cable_length)(phy_data & GG82563_DSPD_CABLE_LENGTH); } ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data); if (ret_val) return ret_val; - phy_info->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) >> - SR_1000T_LOCAL_RX_STATUS_SHIFT; + phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >> + SR_1000T_LOCAL_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; + phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >> + SR_1000T_REMOTE_RX_STATUS_SHIFT) ? + e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok; - phy_info->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) >> - SR_1000T_REMOTE_RX_STATUS_SHIFT; } return E1000_SUCCESS; @@ -4441,9 +4553,9 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->use_eewr = FALSE; break; case e1000_ich8lan: - { + { int32_t i = 0; - uint32_t flash_size = E1000_READ_ICH8_REG(hw, ICH8_FLASH_GFPREG); + uint32_t flash_size = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_GFPREG); eeprom->type = e1000_eeprom_ich8; eeprom->use_eerd = FALSE; @@ -4459,16 +4571,18 @@ e1000_init_eeprom_params(struct e1000_hw *hw) } } - hw->flash_base_addr = (flash_size & ICH8_GFPREG_BASE_MASK) * - ICH8_FLASH_SECTOR_SIZE; + hw->flash_base_addr = (flash_size & ICH_GFPREG_BASE_MASK) * + ICH_FLASH_SECTOR_SIZE; + + hw->flash_bank_size = ((flash_size >> 16) & ICH_GFPREG_BASE_MASK) + 1; + hw->flash_bank_size -= (flash_size & ICH_GFPREG_BASE_MASK); + + hw->flash_bank_size *= ICH_FLASH_SECTOR_SIZE; - hw->flash_bank_size = ((flash_size >> 16) & ICH8_GFPREG_BASE_MASK) + 1; - hw->flash_bank_size -= (flash_size & ICH8_GFPREG_BASE_MASK); - hw->flash_bank_size *= ICH8_FLASH_SECTOR_SIZE; hw->flash_bank_size /= 2 * sizeof(uint16_t); break; - } + } default: break; } @@ -4800,7 +4914,7 @@ e1000_release_eeprom(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -int32_t +static int32_t e1000_spi_eeprom_ready(struct e1000_hw *hw) { uint16_t retry_count = 0; @@ -4854,44 +4968,43 @@ e1000_read_eeprom(struct e1000_hw *hw, { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t i = 0; - int32_t ret_val; DEBUGFUNC("e1000_read_eeprom"); + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ if ((offset >= eeprom->word_size) || (words > eeprom->word_size - offset) || (words == 0)) { - DEBUGOUT("\"words\" parameter out of bounds\n"); + DEBUGOUT2("\"words\" parameter out of bounds. Words = %d, size = %d\n", offset, eeprom->word_size); return -E1000_ERR_EEPROM; } - /* FLASH reads without acquiring the semaphore are safe */ + /* EEPROM's that don't use EERD to read require us to bit-bang the SPI + * directly. In this case, we need to acquire the EEPROM so that + * FW or other port software does not interrupt. + */ if (e1000_is_onboard_nvm_eeprom(hw) == TRUE && hw->eeprom.use_eerd == FALSE) { - switch (hw->mac_type) { - case e1000_80003es2lan: - break; - default: - /* Prepare the EEPROM for reading */ - if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; - break; - } + /* Prepare the EEPROM for bit-bang reading */ + if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; } - if (eeprom->use_eerd == TRUE) { - ret_val = e1000_read_eeprom_eerd(hw, offset, words, data); - if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || - (hw->mac_type != e1000_82573)) - e1000_release_eeprom(hw); - return ret_val; - } + /* Eerd register EEPROM access requires no eeprom aquire/release */ + if (eeprom->use_eerd == TRUE) + return e1000_read_eeprom_eerd(hw, offset, words, data); + /* ICH EEPROM access is done via the ICH flash controller */ if (eeprom->type == e1000_eeprom_ich8) return e1000_read_eeprom_ich8(hw, offset, words, data); + /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have + * acquired the EEPROM at this point, so any returns should relase it */ if (eeprom->type == e1000_eeprom_spi) { uint16_t word_in; uint8_t read_opcode = EEPROM_READ_OPCODE_SPI; @@ -5206,6 +5319,10 @@ e1000_write_eeprom(struct e1000_hw *hw, DEBUGFUNC("e1000_write_eeprom"); + /* If eeprom is not yet detected, do so now */ + if (eeprom->word_size == 0) + e1000_init_eeprom_params(hw); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ @@ -5248,7 +5365,7 @@ e1000_write_eeprom(struct e1000_hw *hw, * data - pointer to array of 8 bit words to be written to the EEPROM * *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_spi(struct e1000_hw *hw, uint16_t offset, uint16_t words, @@ -5314,7 +5431,7 @@ e1000_write_eeprom_spi(struct e1000_hw *hw, * data - pointer to array of 16 bit words to be written to the EEPROM * *****************************************************************************/ -int32_t +static int32_t e1000_write_eeprom_microwire(struct e1000_hw *hw, uint16_t offset, uint16_t words, @@ -5411,10 +5528,8 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) int32_t error = E1000_SUCCESS; uint32_t old_bank_offset = 0; uint32_t new_bank_offset = 0; - uint32_t sector_retries = 0; uint8_t low_byte = 0; uint8_t high_byte = 0; - uint8_t temp_byte = 0; boolean_t sector_write_failed = FALSE; if (hw->mac_type == e1000_82573) { @@ -5467,90 +5582,95 @@ e1000_commit_shadow_ram(struct e1000_hw *hw) e1000_erase_ich8_4k_segment(hw, 0); } - do { - sector_write_failed = FALSE; - /* Loop for every byte in the shadow RAM, - * which is in units of words. */ - for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { - /* Determine whether to write the value stored - * in the other NVM bank or a modified value stored - * in the shadow RAM */ - if (hw->eeprom_shadow_ram[i].modified == TRUE) { - low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word; - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, - &temp_byte); - udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, - low_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + sector_write_failed = FALSE; + /* Loop for every byte in the shadow RAM, + * which is in units of words. */ + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + /* Determine whether to write the value stored + * in the other NVM bank or a modified value stored + * in the shadow RAM */ + if (hw->eeprom_shadow_ram[i].modified == TRUE) { + low_byte = (uint8_t)hw->eeprom_shadow_ram[i].eeprom_word; + udelay(100); + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset, low_byte); + + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + else { high_byte = (uint8_t)(hw->eeprom_shadow_ram[i].eeprom_word >> 8); - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, - &temp_byte); udelay(100); - } else { - e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, - &low_byte); - udelay(100); - error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset, low_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + } + } else { + e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset, + &low_byte); + udelay(100); + error = e1000_verify_write_ich8_byte(hw, + (i << 1) + new_bank_offset, low_byte); + + if (error != E1000_SUCCESS) + sector_write_failed = TRUE; + else { e1000_read_ich8_byte(hw, (i << 1) + old_bank_offset + 1, &high_byte); + udelay(100); } + } + /* If the write of the low byte was successful, go ahread and + * write the high byte while checking to make sure that if it + * is the signature byte, then it is handled properly */ + if (sector_write_failed == FALSE) { /* If the word is 0x13, then make sure the signature bits * (15:14) are 11b until the commit has completed. * This will allow us to write 10b which indicates the * signature is valid. We want to do this after the write * has completed so that we don't mark the segment valid * while the write is still in progress */ - if (i == E1000_ICH8_NVM_SIG_WORD) - high_byte = E1000_ICH8_NVM_SIG_MASK | high_byte; + if (i == E1000_ICH_NVM_SIG_WORD) + high_byte = E1000_ICH_NVM_SIG_MASK | high_byte; error = e1000_verify_write_ich8_byte(hw, - (i << 1) + new_bank_offset + 1, high_byte); + (i << 1) + new_bank_offset + 1, high_byte); if (error != E1000_SUCCESS) sector_write_failed = TRUE; - if (sector_write_failed == FALSE) { - /* Clear the now not used entry in the cache */ - hw->eeprom_shadow_ram[i].modified = FALSE; - hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; - } + } else { + /* If the write failed then break from the loop and + * return an error */ + break; } + } - /* Don't bother writing the segment valid bits if sector - * programming failed. */ - if (sector_write_failed == FALSE) { - /* Finally validate the new segment by setting bit 15:14 - * to 10b in word 0x13 , this can be done without an - * erase as well since these bits are 11 to start with - * and we need to change bit 14 to 0b */ - e1000_read_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, - &high_byte); - high_byte &= 0xBF; + /* Don't bother writing the segment valid bits if sector + * programming failed. */ + if (sector_write_failed == FALSE) { + /* Finally validate the new segment by setting bit 15:14 + * to 10b in word 0x13 , this can be done without an + * erase as well since these bits are 11 to start with + * and we need to change bit 14 to 0b */ + e1000_read_ich8_byte(hw, + E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, + &high_byte); + high_byte &= 0xBF; + error = e1000_verify_write_ich8_byte(hw, + E1000_ICH_NVM_SIG_WORD * 2 + 1 + new_bank_offset, high_byte); + /* And invalidate the previously valid segment by setting + * its signature word (0x13) high_byte to 0b. This can be + * done without an erase because flash erase sets all bits + * to 1's. We can write 1's to 0's without an erase */ + if (error == E1000_SUCCESS) { error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + new_bank_offset, - high_byte); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + E1000_ICH_NVM_SIG_WORD * 2 + 1 + old_bank_offset, 0); + } - /* And invalidate the previously valid segment by setting - * its signature word (0x13) high_byte to 0b. This can be - * done without an erase because flash erase sets all bits - * to 1's. We can write 1's to 0's without an erase */ - error = e1000_verify_write_ich8_byte(hw, - E1000_ICH8_NVM_SIG_WORD * 2 + 1 + old_bank_offset, - 0); - if (error != E1000_SUCCESS) - sector_write_failed = TRUE; + /* Clear the now not used entry in the cache */ + for (i = 0; i < E1000_SHADOW_RAM_WORDS; i++) { + hw->eeprom_shadow_ram[i].modified = FALSE; + hw->eeprom_shadow_ram[i].eeprom_word = 0xFFFF; } - } while (++sector_retries < 10 && sector_write_failed == TRUE); + } } return error; @@ -5640,99 +5760,6 @@ e1000_init_rx_addrs(struct e1000_hw *hw) } /****************************************************************************** - * Updates the MAC's list of multicast addresses. - * - * hw - Struct containing variables accessed by shared code - * mc_addr_list - the list of new multicast addresses - * mc_addr_count - number of addresses - * pad - number of bytes between addresses in the list - * rar_used_count - offset where to start adding mc addresses into the RAR's - * - * The given list replaces any existing list. Clears the last 15 receive - * address registers and the multicast table. Uses receive address registers - * for the first 15 multicast addresses, and hashes the rest into the - * multicast table. - *****************************************************************************/ -#if 0 -void -e1000_mc_addr_list_update(struct e1000_hw *hw, - uint8_t *mc_addr_list, - uint32_t mc_addr_count, - uint32_t pad, - uint32_t rar_used_count) -{ - uint32_t hash_value; - uint32_t i; - uint32_t num_rar_entry; - uint32_t num_mta_entry; - - DEBUGFUNC("e1000_mc_addr_list_update"); - - /* Set the new number of MC addresses that we are being requested to use. */ - hw->num_mc_addrs = mc_addr_count; - - /* Clear RAR[1-15] */ - DEBUGOUT(" Clearing RAR[1-15]\n"); - num_rar_entry = E1000_RAR_ENTRIES; - if (hw->mac_type == e1000_ich8lan) - num_rar_entry = E1000_RAR_ENTRIES_ICH8LAN; - /* Reserve a spot for the Locally Administered Address to work around - * an 82571 issue in which a reset on one port will reload the MAC on - * the other port. */ - if ((hw->mac_type == e1000_82571) && (hw->laa_is_present == TRUE)) - num_rar_entry -= 1; - - for (i = rar_used_count; i < num_rar_entry; i++) { - E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); - E1000_WRITE_FLUSH(hw); - E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); - E1000_WRITE_FLUSH(hw); - } - - /* Clear the MTA */ - DEBUGOUT(" Clearing MTA\n"); - num_mta_entry = E1000_NUM_MTA_REGISTERS; - if (hw->mac_type == e1000_ich8lan) - num_mta_entry = E1000_NUM_MTA_REGISTERS_ICH8LAN; - for (i = 0; i < num_mta_entry; i++) { - E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); - E1000_WRITE_FLUSH(hw); - } - - /* Add the new addresses */ - for (i = 0; i < mc_addr_count; i++) { - DEBUGOUT(" Adding the multicast addresses:\n"); - DEBUGOUT7(" MC Addr #%d =%.2X %.2X %.2X %.2X %.2X %.2X\n", i, - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad)], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 1], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 2], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 3], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 4], - mc_addr_list[i * (ETH_LENGTH_OF_ADDRESS + pad) + 5]); - - hash_value = e1000_hash_mc_addr(hw, - mc_addr_list + - (i * (ETH_LENGTH_OF_ADDRESS + pad))); - - DEBUGOUT1(" Hash value = 0x%03X\n", hash_value); - - /* Place this multicast address in the RAR if there is room, * - * else put it in the MTA - */ - if (rar_used_count < num_rar_entry) { - e1000_rar_set(hw, - mc_addr_list + (i * (ETH_LENGTH_OF_ADDRESS + pad)), - rar_used_count); - rar_used_count++; - } else { - e1000_mta_set(hw, hash_value); - } - } - DEBUGOUT("MC Update Complete\n"); -} -#endif /* 0 */ - -/****************************************************************************** * Hashes an address to determine its location in the multicast table * * hw - Struct containing variables accessed by shared code @@ -5822,6 +5849,7 @@ e1000_mta_set(struct e1000_hw *hw, hash_reg = (hash_value >> 5) & 0x7F; if (hw->mac_type == e1000_ich8lan) hash_reg &= 0x1F; + hash_bit = hash_value & 0x1F; mta = E1000_READ_REG_ARRAY(hw, MTA, hash_reg); @@ -6007,6 +6035,7 @@ e1000_id_led_init(struct e1000_hw * hw) else eeprom_data = ID_LED_DEFAULT; } + for (i = 0; i < 4; i++) { temp = (eeprom_data >> (i << 2)) & led_mask; switch (temp) { @@ -6290,7 +6319,7 @@ e1000_led_off(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +static void e1000_clear_hw_cntrs(struct e1000_hw *hw) { volatile uint32_t temp; @@ -6539,6 +6568,8 @@ e1000_tbi_adjust_stats(struct e1000_hw *hw, void e1000_get_bus_info(struct e1000_hw *hw) { + int32_t ret_val; + uint16_t pci_ex_link_status; uint32_t status; switch (hw->mac_type) { @@ -6548,18 +6579,25 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82571: case e1000_82572: case e1000_82573: + case e1000_80003es2lan: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; - hw->bus_width = e1000_bus_width_pciex_1; + ret_val = e1000_read_pcie_cap_reg(hw, + PCI_EX_LINK_STATUS, + &pci_ex_link_status); + if (ret_val) + hw->bus_width = e1000_bus_width_unknown; + else + hw->bus_width = (pci_ex_link_status & PCI_EX_LINK_WIDTH_MASK) >> + PCI_EX_LINK_WIDTH_SHIFT; break; - case e1000_82571: case e1000_ich8lan: - case e1000_80003es2lan: hw->bus_type = e1000_bus_type_pci_express; hw->bus_speed = e1000_bus_speed_2500; - hw->bus_width = e1000_bus_width_pciex_4; + hw->bus_width = e1000_bus_width_pciex_1; break; default: status = E1000_READ_REG(hw, STATUS); @@ -6593,25 +6631,6 @@ e1000_get_bus_info(struct e1000_hw *hw) break; } } -/****************************************************************************** - * Reads a value from one of the devices registers using port I/O (as opposed - * memory mapped I/O). Only 82544 and newer devices support port I/O. - * - * hw - Struct containing variables accessed by shared code - * offset - offset to read from - *****************************************************************************/ -#if 0 -uint32_t -e1000_read_reg_io(struct e1000_hw *hw, - uint32_t offset) -{ - unsigned long io_addr = hw->io_base; - unsigned long io_data = hw->io_base + 4; - - e1000_io_write(hw, io_addr, offset); - return e1000_io_read(hw, io_data); -} -#endif /* 0 */ /****************************************************************************** * Writes a value to one of the devices registers using port I/O (as opposed to @@ -6633,7 +6652,6 @@ e1000_write_reg_io(struct e1000_hw *hw, e1000_io_write(hw, io_data, value); } - /****************************************************************************** * Estimates the cable length. * @@ -6842,7 +6860,7 @@ e1000_get_cable_length(struct e1000_hw *hw, *****************************************************************************/ static int32_t e1000_check_polarity(struct e1000_hw *hw, - uint16_t *polarity) + e1000_rev_polarity *polarity) { int32_t ret_val; uint16_t phy_data; @@ -6856,8 +6874,10 @@ e1000_check_polarity(struct e1000_hw *hw, &phy_data); if (ret_val) return ret_val; - *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >> - M88E1000_PSSR_REV_POLARITY_SHIFT; + *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >> + M88E1000_PSSR_REV_POLARITY_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; + } else if (hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_3 || hw->phy_type == e1000_phy_igp_2) { @@ -6879,19 +6899,22 @@ e1000_check_polarity(struct e1000_hw *hw, return ret_val; /* Check the polarity bits */ - *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? 1 : 0; + *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } else { /* For 10 Mbps, read the polarity bit in the status register. (for * 100 Mbps this bit is always 0) */ - *polarity = phy_data & IGP01E1000_PSSR_POLARITY_REVERSED; + *polarity = (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } } else if (hw->phy_type == e1000_phy_ife) { ret_val = e1000_read_phy_reg(hw, IFE_PHY_EXTENDED_STATUS_CONTROL, &phy_data); if (ret_val) return ret_val; - *polarity = (phy_data & IFE_PESC_POLARITY_REVERSED) >> - IFE_PESC_POLARITY_REVERSED_SHIFT; + *polarity = ((phy_data & IFE_PESC_POLARITY_REVERSED) >> + IFE_PESC_POLARITY_REVERSED_SHIFT) ? + e1000_rev_polarity_reversed : e1000_rev_polarity_normal; } return E1000_SUCCESS; } @@ -7259,7 +7282,7 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, } else if (hw->smart_speed == e1000_smart_speed_off) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; @@ -7369,7 +7392,7 @@ e1000_set_d0_lplu_state(struct e1000_hw *hw, } else if (hw->smart_speed == e1000_smart_speed_off) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); - if (ret_val) + if (ret_val) return ret_val; phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; @@ -7475,7 +7498,7 @@ e1000_set_vco_speed(struct e1000_hw *hw) * * returns: - E1000_SUCCESS . ****************************************************************************/ -int32_t +static int32_t e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) { uint8_t i; @@ -7686,7 +7709,7 @@ e1000_check_mng_mode(struct e1000_hw *hw) ****************************************************************************/ int32_t e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, - uint16_t length) + uint16_t length) { int32_t ret_val; struct e1000_host_mng_command_header hdr; @@ -7716,7 +7739,7 @@ e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, * * returns - checksum of buffer contents. ****************************************************************************/ -uint8_t +static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length) { uint8_t sum = 0; @@ -7914,32 +7937,6 @@ e1000_set_pci_express_master_disable(struct e1000_hw *hw) E1000_WRITE_REG(hw, CTRL, ctrl); } -/*************************************************************************** - * - * Enables PCI-Express master access. - * - * hw: Struct containing variables accessed by shared code - * - * returns: - none. - * - ***************************************************************************/ -#if 0 -void -e1000_enable_pciex_master(struct e1000_hw *hw) -{ - uint32_t ctrl; - - DEBUGFUNC("e1000_enable_pciex_master"); - - if (hw->bus_type != e1000_bus_type_pci_express) - return; - - ctrl = E1000_READ_REG(hw, CTRL); - ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; - E1000_WRITE_REG(hw, CTRL, ctrl); -} -#endif /* 0 */ - /******************************************************************************* * * Disables PCI-Express master access and verifies there are no pending requests @@ -8063,7 +8060,6 @@ e1000_get_phy_cfg_done(struct e1000_hw *hw) msleep(1); timeout--; } - if (!timeout) { DEBUGOUT("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; @@ -8172,8 +8168,9 @@ e1000_get_software_semaphore(struct e1000_hw *hw) DEBUGFUNC("e1000_get_software_semaphore"); - if (hw->mac_type != e1000_80003es2lan) + if (hw->mac_type != e1000_80003es2lan) { return E1000_SUCCESS; + } while (timeout) { swsm = E1000_READ_REG(hw, SWSM); @@ -8206,8 +8203,9 @@ e1000_release_software_semaphore(struct e1000_hw *hw) DEBUGFUNC("e1000_release_software_semaphore"); - if (hw->mac_type != e1000_80003es2lan) + if (hw->mac_type != e1000_80003es2lan) { return; + } swsm = E1000_READ_REG(hw, SWSM); /* Release the SW semaphores.*/ @@ -8241,7 +8239,7 @@ e1000_check_phy_reset_block(struct e1000_hw *hw) if (hw->mac_type > e1000_82547_rev_2) manc = E1000_READ_REG(hw, MANC); return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? - E1000_BLK_PHY_RESET : E1000_SUCCESS; + E1000_BLK_PHY_RESET : E1000_SUCCESS; } static uint8_t @@ -8377,66 +8375,6 @@ e1000_release_software_flag(struct e1000_hw *hw) return; } -/*************************************************************************** - * - * Disable dynamic power down mode in ife PHY. - * It can be used to workaround band-gap problem. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -#if 0 -int32_t -e1000_ife_disable_dynamic_power_down(struct e1000_hw *hw) -{ - uint16_t phy_data; - int32_t ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_ife_disable_dynamic_power_down"); - - if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN; - ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data); - } - - return ret_val; -} -#endif /* 0 */ - -/*************************************************************************** - * - * Enable dynamic power down mode in ife PHY. - * It can be used to workaround band-gap problem. - * - * hw: Struct containing variables accessed by shared code - * - ***************************************************************************/ -#if 0 -int32_t -e1000_ife_enable_dynamic_power_down(struct e1000_hw *hw) -{ - uint16_t phy_data; - int32_t ret_val = E1000_SUCCESS; - - DEBUGFUNC("e1000_ife_enable_dynamic_power_down"); - - if (hw->phy_type == e1000_phy_ife) { - ret_val = e1000_read_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, &phy_data); - if (ret_val) - return ret_val; - - phy_data &= ~IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN; - ret_val = e1000_write_phy_reg(hw, IFE_PHY_SPECIAL_CONTROL, phy_data); - } - - return ret_val; -} -#endif /* 0 */ - /****************************************************************************** * Reads a 16 bit word or words from the EEPROM using the ICH8's flash access * register. @@ -8558,7 +8496,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) DEBUGFUNC("e1000_ich8_cycle_init"); - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); /* May be check the Flash Des Valid bit in Hw status */ if (hsfsts.hsf_status.fldesvalid == 0) { @@ -8571,7 +8509,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) hsfsts.hsf_status.flcerr = 1; hsfsts.hsf_status.dael = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); /* Either we should have a hardware SPI cycle in progress bit to check * against, in order to start a new cycle or FDONE bit should be changed @@ -8586,13 +8524,13 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) /* There is no cycle running at present, so we can start a cycle */ /* Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); error = E1000_SUCCESS; } else { /* otherwise poll for sometime so the current cycle has a chance * to end before giving up. */ - for (i = 0; i < ICH8_FLASH_COMMAND_TIMEOUT; i++) { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + for (i = 0; i < ICH_FLASH_COMMAND_TIMEOUT; i++) { + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcinprog == 0) { error = E1000_SUCCESS; break; @@ -8603,7 +8541,7 @@ e1000_ich8_cycle_init(struct e1000_hw *hw) /* Successful in waiting for previous cycle to timeout, * now set the Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFSTS, hsfsts.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS, hsfsts.regval); } else { DEBUGOUT("Flash controller busy, cannot get access"); } @@ -8625,13 +8563,13 @@ e1000_ich8_flash_cycle(struct e1000_hw *hw, uint32_t timeout) uint32_t i = 0; /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */ - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); hsflctl.hsf_ctrl.flcgo = 1; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* wait till FDONE bit is set to 1 */ do { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcdone == 1) break; udelay(1); @@ -8665,10 +8603,10 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, DEBUGFUNC("e1000_read_ich8_data"); if (size < 1 || size > 2 || data == 0x0 || - index > ICH8_FLASH_LINEAR_ADDR_MASK) + index > ICH_FLASH_LINEAR_ADDR_MASK) return error; - flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) + + flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + hw->flash_base_addr; do { @@ -8678,25 +8616,25 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, if (error != E1000_SUCCESS) break; - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size - 1; - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_READ; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of index into Flash Linear address field in * Flash Address */ /* TODO: TBD maybe check the index against the size of flash */ - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); /* Check if FCERR is set to 1, if set to 1, clear it and try the whole * sequence a few more times, else read in (shift in) the Flash Data0, * the order is least significant byte first msb to lsb */ if (error == E1000_SUCCESS) { - flash_data = E1000_READ_ICH8_REG(hw, ICH8_FLASH_FDATA0); + flash_data = E1000_READ_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0); if (size == 1) { *data = (uint8_t)(flash_data & 0x000000FF); } else if (size == 2) { @@ -8706,9 +8644,9 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, } else { /* If we've gotten here, then things are probably completely hosed, * but if the error condition is detected, it won't hurt to give - * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times. + * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. */ - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* Repeat for some time before giving up. */ continue; @@ -8717,7 +8655,7 @@ e1000_read_ich8_data(struct e1000_hw *hw, uint32_t index, break; } } - } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT); + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); return error; } @@ -8744,10 +8682,10 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, DEBUGFUNC("e1000_write_ich8_data"); if (size < 1 || size > 2 || data > size * 0xff || - index > ICH8_FLASH_LINEAR_ADDR_MASK) + index > ICH_FLASH_LINEAR_ADDR_MASK) return error; - flash_linear_address = (ICH8_FLASH_LINEAR_ADDR_MASK & index) + + flash_linear_address = (ICH_FLASH_LINEAR_ADDR_MASK & index) + hw->flash_base_addr; do { @@ -8757,34 +8695,34 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, if (error != E1000_SUCCESS) break; - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); /* 0b/1b corresponds to 1 or 2 byte size, respectively. */ hsflctl.hsf_ctrl.fldbcount = size -1; - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_WRITE; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of index into Flash Linear address field in * Flash Address */ - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); if (size == 1) flash_data = (uint32_t)data & 0x00FF; else flash_data = (uint32_t)data; - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FDATA0, flash_data); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FDATA0, flash_data); /* check if FCERR is set to 1 , if set to 1, clear it and try the whole * sequence a few more times else done */ - error = e1000_ich8_flash_cycle(hw, ICH8_FLASH_COMMAND_TIMEOUT); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_COMMAND_TIMEOUT); if (error == E1000_SUCCESS) { break; } else { /* If we're here, then things are most likely completely hosed, * but if the error condition is detected, it won't hurt to give - * it another try...ICH8_FLASH_CYCLE_REPEAT_COUNT times. + * it another try...ICH_FLASH_CYCLE_REPEAT_COUNT times. */ - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* Repeat for some time before giving up. */ continue; @@ -8793,7 +8731,7 @@ e1000_write_ich8_data(struct e1000_hw *hw, uint32_t index, uint32_t size, break; } } - } while (count++ < ICH8_FLASH_CYCLE_REPEAT_COUNT); + } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT); return error; } @@ -8832,20 +8770,22 @@ static int32_t e1000_verify_write_ich8_byte(struct e1000_hw *hw, uint32_t index, uint8_t byte) { int32_t error = E1000_SUCCESS; - int32_t program_retries; - uint8_t temp_byte; + int32_t program_retries = 0; - e1000_write_ich8_byte(hw, index, byte); - udelay(100); + DEBUGOUT2("Byte := %2.2X Offset := %d\n", byte, index); - for (program_retries = 0; program_retries < 100; program_retries++) { - e1000_read_ich8_byte(hw, index, &temp_byte); - if (temp_byte == byte) - break; - udelay(10); - e1000_write_ich8_byte(hw, index, byte); - udelay(100); + error = e1000_write_ich8_byte(hw, index, byte); + + if (error != E1000_SUCCESS) { + for (program_retries = 0; program_retries < 100; program_retries++) { + DEBUGOUT2("Retrying \t Byte := %2.2X Offset := %d\n", byte, index); + error = e1000_write_ich8_byte(hw, index, byte); + udelay(100); + if (error == E1000_SUCCESS) + break; + } } + if (program_retries == 100) error = E1000_ERR_EEPROM; @@ -8886,63 +8826,51 @@ e1000_read_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t *data) } /****************************************************************************** - * Writes a word to the NVM using the ICH8 flash access registers. + * Erases the bank specified. Each bank may be a 4, 8 or 64k block. Banks are 0 + * based. * * hw - pointer to e1000_hw structure - * index - The starting byte index of the word to read. - * data - The word to write to the NVM. - *****************************************************************************/ -#if 0 -int32_t -e1000_write_ich8_word(struct e1000_hw *hw, uint32_t index, uint16_t data) -{ - int32_t status = E1000_SUCCESS; - status = e1000_write_ich8_data(hw, index, 2, data); - return status; -} -#endif /* 0 */ - -/****************************************************************************** - * Erases the bank specified. Each bank is a 4k block. Segments are 0 based. - * segment N is 4096 * N + flash_reg_addr. + * bank - 0 for first bank, 1 for second bank * - * hw - pointer to e1000_hw structure - * segment - 0 for first segment, 1 for second segment, etc. + * Note that this function may actually erase as much as 8 or 64 KBytes. The + * amount of NVM used in each bank is a *minimum* of 4 KBytes, but in fact the + * bank size may be 4, 8 or 64 KBytes *****************************************************************************/ -static int32_t -e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) +int32_t +e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t bank) { union ich8_hws_flash_status hsfsts; union ich8_hws_flash_ctrl hsflctl; uint32_t flash_linear_address; int32_t count = 0; int32_t error = E1000_ERR_EEPROM; - int32_t iteration, seg_size; - int32_t sector_size; + int32_t iteration; + int32_t sub_sector_size = 0; + int32_t bank_size; int32_t j = 0; int32_t error_flag = 0; - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); /* Determine HW Sector size: Read BERASE bits of Hw flash Status register */ /* 00: The Hw sector is 256 bytes, hence we need to erase 16 * consecutive sectors. The start index for the nth Hw sector can be - * calculated as = segment * 4096 + n * 256 + * calculated as bank * 4096 + n * 256 * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector. * The start index for the nth Hw sector can be calculated - * as = segment * 4096 - * 10: Error condition - * 11: The Hw sector size is much bigger than the size asked to - * erase...error condition */ + * as bank * 4096 + * 10: The HW sector is 8K bytes + * 11: The Hw sector size is 64K bytes */ if (hsfsts.hsf_status.berasesz == 0x0) { /* Hw sector size 256 */ - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_256; - iteration = ICH8_FLASH_SECTOR_SIZE / ICH8_FLASH_SEG_SIZE_256; + sub_sector_size = ICH_FLASH_SEG_SIZE_256; + bank_size = ICH_FLASH_SECTOR_SIZE; + iteration = ICH_FLASH_SECTOR_SIZE / ICH_FLASH_SEG_SIZE_256; } else if (hsfsts.hsf_status.berasesz == 0x1) { - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_4K; + bank_size = ICH_FLASH_SEG_SIZE_4K; iteration = 1; } else if (hsfsts.hsf_status.berasesz == 0x3) { - sector_size = seg_size = ICH8_FLASH_SEG_SIZE_64K; + bank_size = ICH_FLASH_SEG_SIZE_64K; iteration = 1; } else { return error; @@ -8960,28 +8888,27 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) /* Write a value 11 (block Erase) in Flash Cycle field in Hw flash * Control */ - hsflctl.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFCTL); - hsflctl.hsf_ctrl.flcycle = ICH8_CYCLE_ERASE; - E1000_WRITE_ICH8_REG16(hw, ICH8_FLASH_HSFCTL, hsflctl.regval); + hsflctl.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL); + hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE; + E1000_WRITE_ICH_FLASH_REG16(hw, ICH_FLASH_HSFCTL, hsflctl.regval); /* Write the last 24 bits of an index within the block into Flash * Linear address field in Flash Address. This probably needs to - * be calculated here based off the on-chip segment size and the - * software segment size assumed (4K) */ - /* TBD */ - flash_linear_address = segment * sector_size + j * seg_size; - flash_linear_address &= ICH8_FLASH_LINEAR_ADDR_MASK; + * be calculated here based off the on-chip erase sector size and + * the software bank size (4, 8 or 64 KBytes) */ + flash_linear_address = bank * bank_size + j * sub_sector_size; flash_linear_address += hw->flash_base_addr; + flash_linear_address &= ICH_FLASH_LINEAR_ADDR_MASK; - E1000_WRITE_ICH8_REG(hw, ICH8_FLASH_FADDR, flash_linear_address); + E1000_WRITE_ICH_FLASH_REG(hw, ICH_FLASH_FADDR, flash_linear_address); - error = e1000_ich8_flash_cycle(hw, 1000000); + error = e1000_ich8_flash_cycle(hw, ICH_FLASH_ERASE_TIMEOUT); /* Check if FCERR is set to 1. If 1, clear it and try the whole * sequence a few more times else Done */ if (error == E1000_SUCCESS) { break; } else { - hsfsts.regval = E1000_READ_ICH8_REG16(hw, ICH8_FLASH_HSFSTS); + hsfsts.regval = E1000_READ_ICH_FLASH_REG16(hw, ICH_FLASH_HSFSTS); if (hsfsts.hsf_status.flcerr == 1) { /* repeat for some time before giving up */ continue; @@ -8990,7 +8917,7 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) break; } } - } while ((count < ICH8_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); + } while ((count < ICH_FLASH_CYCLE_REPEAT_COUNT) && !error_flag); if (error_flag == 1) break; } @@ -8999,44 +8926,6 @@ e1000_erase_ich8_4k_segment(struct e1000_hw *hw, uint32_t segment) return error; } -/****************************************************************************** - * - * Reverse duplex setting without breaking the link. - * - * hw: Struct containing variables accessed by shared code - * - *****************************************************************************/ -#if 0 -int32_t -e1000_duplex_reversal(struct e1000_hw *hw) -{ - int32_t ret_val; - uint16_t phy_data; - - if (hw->phy_type != e1000_phy_igp_3) - return E1000_SUCCESS; - - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data ^= MII_CR_FULL_DUPLEX; - - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if (ret_val) - return ret_val; - - ret_val = e1000_read_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, &phy_data); - if (ret_val) - return ret_val; - - phy_data |= IGP3_PHY_MISC_DUPLEX_MANUAL_SET; - ret_val = e1000_write_phy_reg(hw, IGP3E1000_PHY_MISC_CTRL, phy_data); - - return ret_val; -} -#endif /* 0 */ - static int32_t e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, uint32_t cnf_base_addr, uint32_t cnf_size) @@ -9071,6 +8960,14 @@ e1000_init_lcd_from_nvm_config_region(struct e1000_hw *hw, } +/****************************************************************************** + * This function initializes the PHY from the NVM on ICH8 platforms. This + * is needed due to an issue where the NVM configuration is not properly + * autoloaded after power transitions. Therefore, after each PHY reset, we + * will load the configuration data out of the NVM manually. + * + * hw: Struct containing variables accessed by shared code + *****************************************************************************/ static int32_t e1000_init_lcd_from_nvm(struct e1000_hw *hw) { @@ -9121,5 +9018,3 @@ e1000_init_lcd_from_nvm(struct e1000_hw *hw) return E1000_SUCCESS; } - - diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index a170e96251f..3321fb13bfa 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -93,11 +92,11 @@ typedef enum { /* Flow Control Settings */ typedef enum { - e1000_fc_none = 0, - e1000_fc_rx_pause = 1, - e1000_fc_tx_pause = 2, - e1000_fc_full = 3, - e1000_fc_default = 0xFF + E1000_FC_NONE = 0, + E1000_FC_RX_PAUSE = 1, + E1000_FC_TX_PAUSE = 2, + E1000_FC_FULL = 3, + E1000_FC_DEFAULT = 0xFF } e1000_fc_type; struct e1000_shadow_ram { @@ -129,11 +128,13 @@ typedef enum { /* PCI bus widths */ typedef enum { e1000_bus_width_unknown = 0, + /* These PCIe values should literally match the possible return values + * from config space */ + e1000_bus_width_pciex_1 = 1, + e1000_bus_width_pciex_2 = 2, + e1000_bus_width_pciex_4 = 4, e1000_bus_width_32, e1000_bus_width_64, - e1000_bus_width_pciex_1, - e1000_bus_width_pciex_2, - e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -302,6 +303,9 @@ typedef enum { #define E1000_BLK_PHY_RESET 12 #define E1000_ERR_SWFW_SYNC 13 +#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \ + (((_value) & 0xff00) >> 8)) + /* Function prototypes */ /* Initialization */ int32_t e1000_reset_hw(struct e1000_hw *hw); @@ -314,7 +318,7 @@ int32_t e1000_setup_link(struct e1000_hw *hw); int32_t e1000_phy_setup_autoneg(struct e1000_hw *hw); void e1000_config_collision_dist(struct e1000_hw *hw); int32_t e1000_check_for_link(struct e1000_hw *hw); -int32_t e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t * speed, uint16_t * duplex); +int32_t e1000_get_speed_and_duplex(struct e1000_hw *hw, uint16_t *speed, uint16_t *duplex); int32_t e1000_force_mac_fc(struct e1000_hw *hw); /* PHY */ @@ -322,10 +326,11 @@ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); -void e1000_phy_powerdown_workaround(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); +void e1000_phy_powerdown_workaround(struct e1000_hw *hw); + /* EEPROM Functions */ int32_t e1000_init_eeprom_params(struct e1000_hw *hw); @@ -388,12 +393,10 @@ int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, uint16_t length); boolean_t e1000_check_mng_mode(struct e1000_hw *hw); boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); - int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); -int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); /* Filters (multicast, vlan, receive) */ @@ -420,6 +423,7 @@ void e1000_pci_set_mwi(struct e1000_hw *hw); void e1000_pci_clear_mwi(struct e1000_hw *hw); void e1000_read_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); void e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t * value); +int32_t e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value); /* Port I/O is only supported on 82544 and newer */ void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value); int32_t e1000_disable_pciex_master(struct e1000_hw *hw); @@ -471,6 +475,7 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_82571EB_FIBER 0x105F #define E1000_DEV_ID_82571EB_SERDES 0x1060 #define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4 +#define E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE 0x10BC #define E1000_DEV_ID_82572EI_COPPER 0x107D #define E1000_DEV_ID_82572EI_FIBER 0x107E #define E1000_DEV_ID_82572EI_SERDES 0x107F @@ -488,6 +493,8 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); #define E1000_DEV_ID_ICH8_IGP_AMT 0x104A #define E1000_DEV_ID_ICH8_IGP_C 0x104B #define E1000_DEV_ID_ICH8_IFE 0x104C +#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4 +#define E1000_DEV_ID_ICH8_IFE_G 0x10C5 #define E1000_DEV_ID_ICH8_IGP_M 0x104D @@ -574,10 +581,11 @@ int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); * E1000_RAR_ENTRIES - 1 multicast addresses. */ #define E1000_RAR_ENTRIES 15 -#define E1000_RAR_ENTRIES_ICH8LAN 7 -#define MIN_NUMBER_OF_DESCRIPTORS 8 -#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 +#define E1000_RAR_ENTRIES_ICH8LAN 6 + +#define MIN_NUMBER_OF_DESCRIPTORS 8 +#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* Receive Descriptor */ struct e1000_rx_desc { @@ -1300,6 +1308,7 @@ struct e1000_hw_stats { uint64_t algnerrc; uint64_t symerrs; uint64_t rxerrc; + uint64_t txerrc; uint64_t mpc; uint64_t scc; uint64_t ecol; @@ -1334,6 +1343,7 @@ struct e1000_hw_stats { uint64_t ruc; uint64_t rfc; uint64_t roc; + uint64_t rlerrc; uint64_t rjc; uint64_t mgprc; uint64_t mgpdc; @@ -1367,8 +1377,8 @@ struct e1000_hw_stats { /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - uint8_t *hw_addr; - uint8_t *flash_address; + uint8_t __iomem *hw_addr; + uint8_t __iomem *flash_address; e1000_mac_type mac_type; e1000_phy_type phy_type; uint32_t phy_init_script; @@ -1440,6 +1450,7 @@ struct e1000_hw { boolean_t tbi_compatibility_on; boolean_t laa_is_present; boolean_t phy_reset_disable; + boolean_t initialize_hw_bits_disable; boolean_t fc_send_xon; boolean_t fc_strict_ieee; boolean_t report_tx_early; @@ -1572,8 +1583,8 @@ struct e1000_hw { #define E1000_HICR_FW_RESET 0xC0 #define E1000_SHADOW_RAM_WORDS 2048 -#define E1000_ICH8_NVM_SIG_WORD 0x13 -#define E1000_ICH8_NVM_SIG_MASK 0xC0 +#define E1000_ICH_NVM_SIG_WORD 0x13 +#define E1000_ICH_NVM_SIG_MASK 0xC0 /* EEPROM Read */ #define E1000_EERD_START 0x00000001 /* Start Read */ @@ -1613,16 +1624,17 @@ struct e1000_hw { #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 #define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000 +#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000 #define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 #define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000 #define E1000_CTRL_EXT_WR_WMARK_256 0x00000000 #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 -#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ -#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ -#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ +#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ +#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ +#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ #define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */ #define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */ #define E1000_CTRL_EXT_GHOST_PAREN 0x40000000 @@ -1955,9 +1967,9 @@ struct e1000_hw { #define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */ /* Transmit Descriptor Control */ -#define E1000_TXDCTL_PTHRESH 0x000000FF /* TXDCTL Prefetch Threshold */ -#define E1000_TXDCTL_HTHRESH 0x0000FF00 /* TXDCTL Host Threshold */ -#define E1000_TXDCTL_WTHRESH 0x00FF0000 /* TXDCTL Writeback Threshold */ +#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ +#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ +#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ #define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ #define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ @@ -2218,6 +2230,11 @@ struct e1000_host_command_info { #define E1000_FACTPS_LAN_FUNC_SEL 0x40000000 #define E1000_FACTPS_PM_STATE_CHANGED 0x80000000 +/* PCI-Ex Config Space */ +#define PCI_EX_LINK_STATUS 0x12 +#define PCI_EX_LINK_WIDTH_MASK 0x3F0 +#define PCI_EX_LINK_WIDTH_SHIFT 4 + /* EEPROM Commands - Microwire */ #define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ @@ -3120,6 +3137,7 @@ struct e1000_host_command_info { /* I = Integrated * E = External */ +#define M88_VENDOR 0x0141 #define M88E1000_E_PHY_ID 0x01410C50 #define M88E1000_I_PHY_ID 0x01410C30 #define M88E1011_I_PHY_ID 0x01410C20 @@ -3160,6 +3178,7 @@ struct e1000_host_command_info { #define IGP3_VR_CTRL \ PHY_REG(776, 18) /* Voltage regulator control register */ #define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */ +#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */ #define IGP3_CAPABILITY \ PHY_REG(776, 19) /* IGP3 Capability Register */ @@ -3244,39 +3263,40 @@ struct e1000_host_command_info { #define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ #define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ -#define ICH8_FLASH_COMMAND_TIMEOUT 500 /* 500 ms , should be adjusted */ -#define ICH8_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles , should be adjusted */ -#define ICH8_FLASH_SEG_SIZE_256 256 -#define ICH8_FLASH_SEG_SIZE_4K 4096 -#define ICH8_FLASH_SEG_SIZE_64K 65536 - -#define ICH8_CYCLE_READ 0x0 -#define ICH8_CYCLE_RESERVED 0x1 -#define ICH8_CYCLE_WRITE 0x2 -#define ICH8_CYCLE_ERASE 0x3 - -#define ICH8_FLASH_GFPREG 0x0000 -#define ICH8_FLASH_HSFSTS 0x0004 -#define ICH8_FLASH_HSFCTL 0x0006 -#define ICH8_FLASH_FADDR 0x0008 -#define ICH8_FLASH_FDATA0 0x0010 -#define ICH8_FLASH_FRACC 0x0050 -#define ICH8_FLASH_FREG0 0x0054 -#define ICH8_FLASH_FREG1 0x0058 -#define ICH8_FLASH_FREG2 0x005C -#define ICH8_FLASH_FREG3 0x0060 -#define ICH8_FLASH_FPR0 0x0074 -#define ICH8_FLASH_FPR1 0x0078 -#define ICH8_FLASH_SSFSTS 0x0090 -#define ICH8_FLASH_SSFCTL 0x0092 -#define ICH8_FLASH_PREOP 0x0094 -#define ICH8_FLASH_OPTYPE 0x0096 -#define ICH8_FLASH_OPMENU 0x0098 - -#define ICH8_FLASH_REG_MAPSIZE 0x00A0 -#define ICH8_FLASH_SECTOR_SIZE 4096 -#define ICH8_GFPREG_BASE_MASK 0x1FFF -#define ICH8_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF +#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */ +#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */ +#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */ +#define ICH_FLASH_SEG_SIZE_256 256 +#define ICH_FLASH_SEG_SIZE_4K 4096 +#define ICH_FLASH_SEG_SIZE_64K 65536 + +#define ICH_CYCLE_READ 0x0 +#define ICH_CYCLE_RESERVED 0x1 +#define ICH_CYCLE_WRITE 0x2 +#define ICH_CYCLE_ERASE 0x3 + +#define ICH_FLASH_GFPREG 0x0000 +#define ICH_FLASH_HSFSTS 0x0004 +#define ICH_FLASH_HSFCTL 0x0006 +#define ICH_FLASH_FADDR 0x0008 +#define ICH_FLASH_FDATA0 0x0010 +#define ICH_FLASH_FRACC 0x0050 +#define ICH_FLASH_FREG0 0x0054 +#define ICH_FLASH_FREG1 0x0058 +#define ICH_FLASH_FREG2 0x005C +#define ICH_FLASH_FREG3 0x0060 +#define ICH_FLASH_FPR0 0x0074 +#define ICH_FLASH_FPR1 0x0078 +#define ICH_FLASH_SSFSTS 0x0090 +#define ICH_FLASH_SSFCTL 0x0092 +#define ICH_FLASH_PREOP 0x0094 +#define ICH_FLASH_OPTYPE 0x0096 +#define ICH_FLASH_OPMENU 0x0098 + +#define ICH_FLASH_REG_MAPSIZE 0x00A0 +#define ICH_FLASH_SECTOR_SIZE 4096 +#define ICH_GFPREG_BASE_MASK 0x1FFF +#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF /* ICH8 GbE Flash Hardware Sequencing Flash Status Register bit breakdown */ /* Offset 04h HSFSTS */ diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 3f6a752700a..73f3a85fd23 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -28,6 +27,7 @@ *******************************************************************************/ #include "e1000.h" +#include <net/ip6_checksum.h> char e1000_driver_name[] = "e1000"; static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; @@ -36,7 +36,7 @@ static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "7.2.7-k2"DRIVERNAPI +#define DRV_VERSION "7.3.15-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation."; @@ -104,22 +104,33 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x10B9), INTEL_E1000_ETHERNET_DEVICE(0x10BA), INTEL_E1000_ETHERNET_DEVICE(0x10BB), + INTEL_E1000_ETHERNET_DEVICE(0x10BC), + INTEL_E1000_ETHERNET_DEVICE(0x10C4), + INTEL_E1000_ETHERNET_DEVICE(0x10C5), /* required last entry */ {0,} }; MODULE_DEVICE_TABLE(pci, e1000_pci_tbl); +int e1000_up(struct e1000_adapter *adapter); +void e1000_down(struct e1000_adapter *adapter); +void e1000_reinit_locked(struct e1000_adapter *adapter); +void e1000_reset(struct e1000_adapter *adapter); +int e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx); +int e1000_setup_all_tx_resources(struct e1000_adapter *adapter); +int e1000_setup_all_rx_resources(struct e1000_adapter *adapter); +void e1000_free_all_tx_resources(struct e1000_adapter *adapter); +void e1000_free_all_rx_resources(struct e1000_adapter *adapter); static int e1000_setup_tx_resources(struct e1000_adapter *adapter, - struct e1000_tx_ring *txdr); + struct e1000_tx_ring *txdr); static int e1000_setup_rx_resources(struct e1000_adapter *adapter, - struct e1000_rx_ring *rxdr); + struct e1000_rx_ring *rxdr); static void e1000_free_tx_resources(struct e1000_adapter *adapter, - struct e1000_tx_ring *tx_ring); + struct e1000_tx_ring *tx_ring); static void e1000_free_rx_resources(struct e1000_adapter *adapter, - struct e1000_rx_ring *rx_ring); - -/* Local Function Prototypes */ + struct e1000_rx_ring *rx_ring); +void e1000_update_stats(struct e1000_adapter *adapter); static int e1000_init_module(void); static void e1000_exit_module(void); @@ -146,7 +157,10 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev); static struct net_device_stats * e1000_get_stats(struct net_device *netdev); static int e1000_change_mtu(struct net_device *netdev, int new_mtu); static int e1000_set_mac(struct net_device *netdev, void *p); -static irqreturn_t e1000_intr(int irq, void *data, struct pt_regs *regs); +static irqreturn_t e1000_intr(int irq, void *data); +#ifdef CONFIG_PCI_MSI +static irqreturn_t e1000_intr_msi(int irq, void *data); +#endif static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring); #ifdef CONFIG_E1000_NAPI @@ -172,10 +186,11 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); +void e1000_set_ethtool_ops(struct net_device *netdev); static void e1000_enter_82542_rst(struct e1000_adapter *adapter); static void e1000_leave_82542_rst(struct e1000_adapter *adapter); static void e1000_tx_timeout(struct net_device *dev); -static void e1000_reset_task(struct net_device *dev); +static void e1000_reset_task(struct work_struct *work); static void e1000_smartspeed(struct e1000_adapter *adapter); static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter, struct sk_buff *skb); @@ -196,6 +211,8 @@ static void e1000_shutdown(struct pci_dev *pdev); static void e1000_netpoll (struct net_device *netdev); #endif +extern void e1000_check_options(struct e1000_adapter *adapter); + static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state); static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev); @@ -212,9 +229,9 @@ static struct pci_driver e1000_driver = { .id_table = e1000_pci_tbl, .probe = e1000_probe, .remove = __devexit_p(e1000_remove), +#ifdef CONFIG_PM /* Power Managment Hooks */ .suspend = e1000_suspend, -#ifdef CONFIG_PM .resume = e1000_resume, #endif .shutdown = e1000_shutdown, @@ -275,7 +292,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) flags = IRQF_SHARED; #ifdef CONFIG_PCI_MSI - if (adapter->hw.mac_type > e1000_82547_rev_2) { + if (adapter->hw.mac_type >= e1000_82571) { adapter->have_msi = TRUE; if ((err = pci_enable_msi(adapter->pdev))) { DPRINTK(PROBE, ERR, @@ -283,8 +300,14 @@ static int e1000_request_irq(struct e1000_adapter *adapter) adapter->have_msi = FALSE; } } - if (adapter->have_msi) + if (adapter->have_msi) { flags &= ~IRQF_SHARED; + err = request_irq(adapter->pdev->irq, &e1000_intr_msi, flags, + netdev->name, netdev); + if (err) + DPRINTK(PROBE, ERR, + "Unable to allocate interrupt Error: %d\n", err); + } else #endif if ((err = request_irq(adapter->pdev->irq, &e1000_intr, flags, netdev->name, netdev))) @@ -365,7 +388,7 @@ e1000_update_mng_vlan(struct e1000_adapter *adapter) * e1000_release_hw_control resets {CTRL_EXT|FWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that the * driver is no longer loaded. For AMT version (only with 82573) i - * of the f/w this means that the netowrk i/f is closed. + * of the f/w this means that the network i/f is closed. * **/ @@ -406,7 +429,7 @@ e1000_release_hw_control(struct e1000_adapter *adapter) * e1000_get_hw_control sets {CTRL_EXT|FWSM}:DRV_LOAD bit. * For ASF and Pass Through versions of f/w this means that * the driver is loaded. For AMT version (only with 82573) - * of the f/w this means that the netowrk i/f is open. + * of the f/w this means that the network i/f is open. * **/ @@ -416,6 +439,7 @@ e1000_get_hw_control(struct e1000_adapter *adapter) uint32_t ctrl_ext; uint32_t swsm; uint32_t extcnf; + /* Let firmware know the driver has taken over */ switch (adapter->hw.mac_type) { case e1000_82571: @@ -466,13 +490,14 @@ e1000_up(struct e1000_adapter *adapter) adapter->tx_queue_len = netdev->tx_queue_len; - mod_timer(&adapter->watchdog_timer, jiffies); - #ifdef CONFIG_E1000_NAPI netif_poll_enable(netdev); #endif e1000_irq_enable(adapter); + clear_bit(__E1000_DOWN, &adapter->flags); + + mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); return 0; } @@ -502,25 +527,48 @@ void e1000_power_up_phy(struct e1000_adapter *adapter) static void e1000_power_down_phy(struct e1000_adapter *adapter) { - boolean_t mng_mode_enabled = (adapter->hw.mac_type >= e1000_82571) && - e1000_check_mng_mode(&adapter->hw); - /* Power down the PHY so no link is implied when interface is down - * The PHY cannot be powered down if any of the following is TRUE + /* Power down the PHY so no link is implied when interface is down * + * The PHY cannot be powered down if any of the following is TRUE * * (a) WoL is enabled * (b) AMT is active * (c) SoL/IDER session is active */ if (!adapter->wol && adapter->hw.mac_type >= e1000_82540 && - adapter->hw.mac_type != e1000_ich8lan && - adapter->hw.media_type == e1000_media_type_copper && - !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN) && - !mng_mode_enabled && - !e1000_check_phy_reset_block(&adapter->hw)) { + adapter->hw.media_type == e1000_media_type_copper) { uint16_t mii_reg = 0; + + switch (adapter->hw.mac_type) { + case e1000_82540: + case e1000_82545: + case e1000_82545_rev_3: + case e1000_82546: + case e1000_82546_rev_3: + case e1000_82541: + case e1000_82541_rev_2: + case e1000_82547: + case e1000_82547_rev_2: + if (E1000_READ_REG(&adapter->hw, MANC) & + E1000_MANC_SMBUS_EN) + goto out; + break; + case e1000_82571: + case e1000_82572: + case e1000_82573: + case e1000_80003es2lan: + case e1000_ich8lan: + if (e1000_check_mng_mode(&adapter->hw) || + e1000_check_phy_reset_block(&adapter->hw)) + goto out; + break; + default: + goto out; + } e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg); mdelay(1); } +out: + return; } void @@ -528,6 +576,10 @@ e1000_down(struct e1000_adapter *adapter) { struct net_device *netdev = adapter->netdev; + /* signal that we're down so the interrupt handler does not + * reschedule our watchdog timer */ + set_bit(__E1000_DOWN, &adapter->flags); + e1000_irq_disable(adapter); del_timer_sync(&adapter->tx_fifo_stall_timer); @@ -629,6 +681,7 @@ e1000_reset(struct e1000_adapter *adapter) e1000_reset_hw(&adapter->hw); if (adapter->hw.mac_type >= e1000_82544) E1000_WRITE_REG(&adapter->hw, WUC, 0); + if (e1000_init_hw(&adapter->hw)) DPRINTK(PROBE, ERR, "Hardware Error\n"); e1000_update_mng_vlan(adapter); @@ -652,9 +705,10 @@ e1000_reset(struct e1000_adapter *adapter) phy_data); } - if (adapter->hw.mac_type < e1000_ich8lan) - /* FIXME: this code is duplicate and wrong for PCI Express */ - if (adapter->en_mng_pt) { + if ((adapter->en_mng_pt) && + (adapter->hw.mac_type >= e1000_82540) && + (adapter->hw.mac_type < e1000_82571) && + (adapter->hw.media_type == e1000_media_type_copper)) { manc = E1000_READ_REG(&adapter->hw, MANC); manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST); E1000_WRITE_REG(&adapter->hw, MANC, manc); @@ -760,7 +814,7 @@ e1000_probe(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER netdev->poll_controller = e1000_netpoll; #endif - strcpy(netdev->name, pci_name(pdev)); + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); netdev->mem_start = mmio_start; netdev->mem_end = mmio_start + mmio_len; @@ -803,9 +857,9 @@ e1000_probe(struct pci_dev *pdev, (adapter->hw.mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; -#ifdef NETIF_F_TSO_IPV6 +#ifdef NETIF_F_TSO6 if (adapter->hw.mac_type > e1000_82547_rev_2) - netdev->features |= NETIF_F_TSO_IPV6; + netdev->features |= NETIF_F_TSO6; #endif #endif if (pci_using_dac) @@ -860,13 +914,7 @@ e1000_probe(struct pci_dev *pdev, adapter->phy_info_timer.function = &e1000_update_phy_info; adapter->phy_info_timer.data = (unsigned long) adapter; - INIT_WORK(&adapter->reset_task, - (void (*)(void *))e1000_reset_task, netdev); - - /* we're going to reset, so assume we have no link for now */ - - netif_carrier_off(netdev); - netif_stop_queue(netdev); + INIT_WORK(&adapter->reset_task, e1000_reset_task); e1000_check_options(adapter); @@ -925,6 +973,7 @@ e1000_probe(struct pci_dev *pdev, break; case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LOWPROFILE: /* if quad port adapter, disable WoL on all but port A */ if (global_quad_port_a != 0) adapter->eeprom_wol = 0; @@ -974,6 +1023,10 @@ e1000_probe(struct pci_dev *pdev, if ((err = register_netdev(netdev))) goto err_register; + /* tell the stack to leave us alone until e1000_open() is called */ + netif_carrier_off(netdev); + netif_stop_queue(netdev); + DPRINTK(PROBE, INFO, "Intel(R) PRO/1000 Network Connection\n"); cards_found++; @@ -1033,8 +1086,8 @@ e1000_remove(struct pci_dev *pdev) flush_scheduled_work(); if (adapter->hw.mac_type >= e1000_82540 && - adapter->hw.mac_type != e1000_ich8lan && - adapter->hw.media_type == e1000_media_type_copper) { + adapter->hw.mac_type < e1000_82571 && + adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); if (manc & E1000_MANC_SMBUS_EN) { manc |= E1000_MANC_ARP_EN; @@ -1161,6 +1214,8 @@ e1000_sw_init(struct e1000_adapter *adapter) atomic_set(&adapter->irq_sem, 1); spin_lock_init(&adapter->stats_lock); + set_bit(__E1000_DOWN, &adapter->flags); + return 0; } @@ -1226,16 +1281,14 @@ e1000_open(struct net_device *netdev) int err; /* disallow open during test */ - if (test_bit(__E1000_DRIVER_TESTING, &adapter->flags)) + if (test_bit(__E1000_TESTING, &adapter->flags)) return -EBUSY; /* allocate transmit descriptors */ - if ((err = e1000_setup_all_tx_resources(adapter))) goto err_setup_tx; /* allocate receive descriptors */ - if ((err = e1000_setup_all_rx_resources(adapter))) goto err_setup_rx; @@ -1299,8 +1352,12 @@ e1000_close(struct net_device *netdev) e1000_free_all_tx_resources(adapter); e1000_free_all_rx_resources(adapter); + /* kill manageability vlan ID if supported, but not if a vlan with + * the same ID is registered on the host OS (let 8021q kill it) */ if ((adapter->hw.mng_cookie.status & - E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + !(adapter->vlgrp && + adapter->vlgrp->vlan_devices[adapter->mng_vlan_id])) { e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); } @@ -1510,27 +1567,16 @@ e1000_configure_tx(struct e1000_adapter *adapter) /* Program the Transmit Control Register */ tctl = E1000_READ_REG(hw, TCTL); - tctl &= ~E1000_TCTL_CT; tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC | (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); -#ifdef DISABLE_MULR - /* disable Multiple Reads for debugging */ - tctl &= ~E1000_TCTL_MULR; -#endif - if (hw->mac_type == e1000_82571 || hw->mac_type == e1000_82572) { tarc = E1000_READ_REG(hw, TARC0); - tarc |= ((1 << 25) | (1 << 21)); + /* set the speed mode bit, we'll clear it if we're not at + * gigabit link later */ + tarc |= (1 << 21); E1000_WRITE_REG(hw, TARC0, tarc); - tarc = E1000_READ_REG(hw, TARC1); - tarc |= (1 << 25); - if (tctl & E1000_TCTL_MULR) - tarc &= ~(1 << 28); - else - tarc |= (1 << 28); - E1000_WRITE_REG(hw, TARC1, tarc); } else if (hw->mac_type == e1000_80003es2lan) { tarc = E1000_READ_REG(hw, TARC0); tarc |= 1; @@ -1543,8 +1589,11 @@ e1000_configure_tx(struct e1000_adapter *adapter) e1000_config_collision_dist(hw); /* Setup Transmit Descriptor Settings for eop descriptor */ - adapter->txd_cmd = E1000_TXD_CMD_IDE | E1000_TXD_CMD_EOP | - E1000_TXD_CMD_IFCS; + adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS; + + /* only set IDE if we are delaying interrupts using the timers */ + if (adapter->tx_int_delay) + adapter->txd_cmd |= E1000_TXD_CMD_IDE; if (hw->mac_type < e1000_82543) adapter->txd_cmd |= E1000_TXD_CMD_RPS; @@ -1768,9 +1817,11 @@ e1000_setup_rctl(struct e1000_adapter *adapter) * followed by the page buffers. Therefore, skb->data is * sized to hold the largest protocol header. */ + /* allocations using alloc_page take too long for regular MTU + * so only enable packet split for jumbo frames */ pages = PAGE_USE_COUNT(adapter->netdev->mtu); - if ((adapter->hw.mac_type > e1000_82547_rev_2) && (pages <= 3) && - PAGE_SIZE <= 16384) + if ((adapter->hw.mac_type >= e1000_82571) && (pages <= 3) && + PAGE_SIZE <= 16384 && (rctl & E1000_RCTL_LPE)) adapter->rx_ps_pages = pages; else adapter->rx_ps_pages = 0; @@ -1779,8 +1830,11 @@ e1000_setup_rctl(struct e1000_adapter *adapter) /* Configure extra packet-split registers */ rfctl = E1000_READ_REG(&adapter->hw, RFCTL); rfctl |= E1000_RFCTL_EXTEN; - /* disable IPv6 packet split support */ - rfctl |= E1000_RFCTL_IPV6_DIS; + /* disable packet split support for IPv6 extension headers, + * because some malformed IPv6 headers can hang the RX */ + rfctl |= (E1000_RFCTL_IPV6_EX_DIS | + E1000_RFCTL_NEW_IPV6_EXT_DIS); + E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl); rctl |= E1000_RCTL_DTYP_PS; @@ -1843,7 +1897,7 @@ e1000_configure_rx(struct e1000_adapter *adapter) if (hw->mac_type >= e1000_82540) { E1000_WRITE_REG(hw, RADV, adapter->rx_abs_int_delay); - if (adapter->itr > 1) + if (adapter->itr_setting != 0) E1000_WRITE_REG(hw, ITR, 1000000000 / (adapter->itr * 256)); } @@ -1853,11 +1907,11 @@ e1000_configure_rx(struct e1000_adapter *adapter) /* Reset delay timers after every interrupt */ ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; #ifdef CONFIG_E1000_NAPI - /* Auto-Mask interrupts upon ICR read. */ + /* Auto-Mask interrupts upon ICR access */ ctrl_ext |= E1000_CTRL_EXT_IAME; + E1000_WRITE_REG(hw, IAM, 0xffffffff); #endif E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); - E1000_WRITE_REG(hw, IAM, ~0); E1000_WRITE_FLUSH(hw); } @@ -1896,6 +1950,12 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(hw, RXCSUM, rxcsum); } + /* enable early receives on 82573, only takes effect if using > 2048 + * byte total frame size. for example only for jumbo frames */ +#define E1000_ERT_2048 0x100 + if (hw->mac_type == e1000_82573) + E1000_WRITE_REG(hw, ERT, E1000_ERT_2048); + /* Enable Receives */ E1000_WRITE_REG(hw, RCTL, rctl); } @@ -1949,10 +2009,13 @@ e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, buffer_info->dma, buffer_info->length, PCI_DMA_TODEVICE); + buffer_info->dma = 0; } - if (buffer_info->skb) + if (buffer_info->skb) { dev_kfree_skb_any(buffer_info->skb); - memset(buffer_info, 0, sizeof(struct e1000_buffer)); + buffer_info->skb = NULL; + } + /* buffer_info must be completely set up in the transmit path */ } /** @@ -2376,6 +2439,7 @@ e1000_watchdog(unsigned long data) DPRINTK(LINK, INFO, "Gigabit has been disabled, downgrading speed\n"); } + if (adapter->hw.mac_type == e1000_82573) { e1000_enable_tx_pkt_filtering(&adapter->hw); if (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) @@ -2420,13 +2484,12 @@ e1000_watchdog(unsigned long data) if ((adapter->hw.mac_type == e1000_82571 || adapter->hw.mac_type == e1000_82572) && txb2b == 0) { -#define SPEED_MODE_BIT (1 << 21) uint32_t tarc0; tarc0 = E1000_READ_REG(&adapter->hw, TARC0); - tarc0 &= ~SPEED_MODE_BIT; + tarc0 &= ~(1 << 21); E1000_WRITE_REG(&adapter->hw, TARC0, tarc0); } - + #ifdef NETIF_F_TSO /* disable TSO for pcie and 10/100 speeds, to avoid * some hardware issues */ @@ -2438,9 +2501,15 @@ e1000_watchdog(unsigned long data) DPRINTK(PROBE,INFO, "10/100 speed: disabling TSO\n"); netdev->features &= ~NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + netdev->features &= ~NETIF_F_TSO6; +#endif break; case SPEED_1000: netdev->features |= NETIF_F_TSO; +#ifdef NETIF_F_TSO6 + netdev->features |= NETIF_F_TSO6; +#endif break; default: /* oops */ @@ -2507,19 +2576,6 @@ e1000_watchdog(unsigned long data) } } - /* Dynamic mode for Interrupt Throttle Rate (ITR) */ - if (adapter->hw.mac_type >= e1000_82540 && adapter->itr == 1) { - /* Symmetric Tx/Rx gets a reduced ITR=2000; Total - * asymmetrical Tx or Rx gets ITR=8000; everyone - * else is between 2000-8000. */ - uint32_t goc = (adapter->gotcl + adapter->gorcl) / 10000; - uint32_t dif = (adapter->gotcl > adapter->gorcl ? - adapter->gotcl - adapter->gorcl : - adapter->gorcl - adapter->gotcl) / 10000; - uint32_t itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000; - E1000_WRITE_REG(&adapter->hw, ITR, 1000000000 / (itr * 256)); - } - /* Cause software interrupt to ensure rx ring is cleaned */ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0); @@ -2535,6 +2591,135 @@ e1000_watchdog(unsigned long data) mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ); } +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + +/** + * e1000_update_itr - update the dynamic ITR value based on statistics + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see e1000_param.c) + * @adapter: pointer to adapter + * @itr_setting: current adapter->itr + * @packets: the number of packets during this measurement interval + * @bytes: the number of bytes during this measurement interval + **/ +static unsigned int e1000_update_itr(struct e1000_adapter *adapter, + uint16_t itr_setting, + int packets, + int bytes) +{ + unsigned int retval = itr_setting; + struct e1000_hw *hw = &adapter->hw; + + if (unlikely(hw->mac_type < e1000_82540)) + goto update_itr_done; + + if (packets == 0) + goto update_itr_done; + + + switch (itr_setting) { + case lowest_latency: + if ((packets < 5) && (bytes > 512)) + retval = low_latency; + break; + case low_latency: /* 50 usec aka 20000 ints/s */ + if (bytes > 10000) { + if ((packets < 10) || + ((bytes/packets) > 1200)) + retval = bulk_latency; + else if ((packets > 35)) + retval = lowest_latency; + } else if (packets <= 2 && bytes < 512) + retval = lowest_latency; + break; + case bulk_latency: /* 250 usec aka 4000 ints/s */ + if (bytes > 25000) { + if (packets > 35) + retval = low_latency; + } else { + if (bytes < 6000) + retval = low_latency; + } + break; + } + +update_itr_done: + return retval; +} + +static void e1000_set_itr(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + uint16_t current_itr; + uint32_t new_itr = adapter->itr; + + if (unlikely(hw->mac_type < e1000_82540)) + return; + + /* for non-gigabit speeds, just fix the interrupt rate at 4000 */ + if (unlikely(adapter->link_speed != SPEED_1000)) { + current_itr = 0; + new_itr = 4000; + goto set_itr_now; + } + + adapter->tx_itr = e1000_update_itr(adapter, + adapter->tx_itr, + adapter->total_tx_packets, + adapter->total_tx_bytes); + adapter->rx_itr = e1000_update_itr(adapter, + adapter->rx_itr, + adapter->total_rx_packets, + adapter->total_rx_bytes); + + current_itr = max(adapter->rx_itr, adapter->tx_itr); + + /* conservative mode eliminates the lowest_latency setting */ + if (current_itr == lowest_latency && (adapter->itr_setting == 3)) + current_itr = low_latency; + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = 70000; + break; + case low_latency: + new_itr = 20000; /* aka hwitr = ~200 */ + break; + case bulk_latency: + new_itr = 4000; + break; + default: + break; + } + +set_itr_now: + if (new_itr != adapter->itr) { + /* this attempts to bias the interrupt rate towards Bulk + * by adding intermediate steps when interrupt rate is + * increasing */ + new_itr = new_itr > adapter->itr ? + min(adapter->itr + (new_itr >> 2), new_itr) : + new_itr; + adapter->itr = new_itr; + E1000_WRITE_REG(hw, ITR, 1000000000 / (new_itr * 256)); + } + + return; +} + #define E1000_TX_FLAGS_CSUM 0x00000001 #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 @@ -2575,7 +2760,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, 0); cmd_length = E1000_TXD_CMD_IP; ipcse = skb->h.raw - skb->data - 1; -#ifdef NETIF_F_TSO_IPV6 +#ifdef NETIF_F_TSO6 } else if (skb->protocol == htons(ETH_P_IPV6)) { skb->nh.ipv6h->payload_len = 0; skb->h.th->check = @@ -2611,6 +2796,7 @@ e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, context_desc->cmd_and_length = cpu_to_le32(cmd_length); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; if (++i == tx_ring->count) i = 0; tx_ring->next_to_use = i; @@ -2639,12 +2825,13 @@ e1000_tx_csum(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, context_desc = E1000_CONTEXT_DESC(*tx_ring, i); context_desc->upper_setup.tcp_fields.tucss = css; - context_desc->upper_setup.tcp_fields.tucso = css + skb->csum; + context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset; context_desc->upper_setup.tcp_fields.tucse = 0; context_desc->tcp_seg_setup.data = 0; context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; if (unlikely(++i == tx_ring->count)) i = 0; tx_ring->next_to_use = i; @@ -2713,6 +2900,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, size, PCI_DMA_TODEVICE); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; len -= size; offset += size; @@ -2752,6 +2940,7 @@ e1000_tx_map(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, size, PCI_DMA_TODEVICE); buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; len -= size; offset += size; @@ -2817,6 +3006,9 @@ e1000_tx_queue(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring, tx_ring->next_to_use = i; writel(i, adapter->hw.hw_addr + tx_ring->tdt); + /* we need this if more than one processor can write to our tail + * at a time, it syncronizes IO on IA64/Altix systems */ + mmiowb(); } /** @@ -2892,6 +3084,36 @@ e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) return 0; } +static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) +{ + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_tx_ring *tx_ring = adapter->tx_ring; + + netif_stop_queue(netdev); + /* Herbert's original patch had: + * smp_mb__after_netif_stop_queue(); + * but since that doesn't exist yet, just open code it. */ + smp_mb(); + + /* We need to check again in a case another CPU has just + * made room available. */ + if (likely(E1000_DESC_UNUSED(tx_ring) < size)) + return -EBUSY; + + /* A reprieve! */ + netif_start_queue(netdev); + ++adapter->restart_queue; + return 0; +} + +static int e1000_maybe_stop_tx(struct net_device *netdev, + struct e1000_tx_ring *tx_ring, int size) +{ + if (likely(E1000_DESC_UNUSED(tx_ring) >= size)) + return 0; + return __e1000_maybe_stop_tx(netdev, size); +} + #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) @@ -2910,6 +3132,10 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int f; len -= skb->data_len; + /* This goes back to the question of how to logically map a tx queue + * to a flow. Right now, performance is impacted slightly negatively + * if using multiple tx queues. If the stack breaks away from a + * single qdisc implementation, we can look at this again. */ tx_ring = adapter->tx_ring; if (unlikely(skb->len <= 0)) { @@ -2917,6 +3143,11 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) return NETDEV_TX_OK; } + /* 82571 and newer doesn't need the workaround that limited descriptor + * length to 4kB */ + if (adapter->hw.mac_type >= e1000_82571) + max_per_txd = 8192; + #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->gso_size; /* The controller does a simple calculation to @@ -2930,9 +3161,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) max_per_txd = min(mss << 2, max_per_txd); max_txd_pwr = fls(max_per_txd) - 1; - /* TSO Workaround for 82571/2/3 Controllers -- if skb->data - * points to just header, pull a few bytes of payload from - * frags into skb->data */ + /* TSO Workaround for 82571/2/3 Controllers -- if skb->data + * points to just header, pull a few bytes of payload from + * frags into skb->data */ hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); if (skb->data_len && (hdr_len == (skb->len - skb->data_len))) { switch (adapter->hw.mac_type) { @@ -3005,8 +3236,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ - if (unlikely(E1000_DESC_UNUSED(tx_ring) < count + 2)) { - netif_stop_queue(netdev); + if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2))) { spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_BUSY; } @@ -3014,7 +3244,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (unlikely(adapter->hw.mac_type == e1000_82547)) { if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) { netif_stop_queue(netdev); - mod_timer(&adapter->tx_fifo_stall_timer, jiffies); + mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1); spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_BUSY; } @@ -3053,8 +3283,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) netdev->trans_start = jiffies; /* Make sure there is space in the ring for the next send. */ - if (unlikely(E1000_DESC_UNUSED(tx_ring) < MAX_SKB_FRAGS + 2)) - netif_stop_queue(netdev); + e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2); spin_unlock_irqrestore(&tx_ring->tx_lock, flags); return NETDEV_TX_OK; @@ -3076,9 +3305,10 @@ e1000_tx_timeout(struct net_device *netdev) } static void -e1000_reset_task(struct net_device *netdev) +e1000_reset_task(struct work_struct *work) { - struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_adapter *adapter = + container_of(work, struct e1000_adapter, reset_task); e1000_reinit_locked(adapter); } @@ -3131,11 +3361,13 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) } break; case e1000_82573: - /* only enable jumbo frames if ASPM is disabled completely - * this means both bits must be zero in 0x1A bits 3:2 */ + /* Jumbo Frames not supported if: + * - this is not an 82573L device + * - ASPM is enabled in any way (0x1A bits 3:2) */ e1000_read_eeprom(&adapter->hw, EEPROM_INIT_3GIO_3, 1, &eeprom_data); - if (eeprom_data & EEPROM_WORD1A_ASPM_MASK) { + if ((adapter->hw.device_id != E1000_DEV_ID_82573L) || + (eeprom_data & EEPROM_WORD1A_ASPM_MASK)) { if (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { DPRINTK(PROBE, ERR, "Jumbo Frames not supported.\n"); @@ -3143,6 +3375,8 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) } break; } + /* ERT will be enabled later to enable wire speed receives */ + /* fall through to get support */ case e1000_82571: case e1000_82572: @@ -3234,12 +3468,12 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.roc += E1000_READ_REG(hw, ROC); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.prc64 += E1000_READ_REG(hw, PRC64); - adapter->stats.prc127 += E1000_READ_REG(hw, PRC127); - adapter->stats.prc255 += E1000_READ_REG(hw, PRC255); - adapter->stats.prc511 += E1000_READ_REG(hw, PRC511); - adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023); - adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522); + adapter->stats.prc64 += E1000_READ_REG(hw, PRC64); + adapter->stats.prc127 += E1000_READ_REG(hw, PRC127); + adapter->stats.prc255 += E1000_READ_REG(hw, PRC255); + adapter->stats.prc511 += E1000_READ_REG(hw, PRC511); + adapter->stats.prc1023 += E1000_READ_REG(hw, PRC1023); + adapter->stats.prc1522 += E1000_READ_REG(hw, PRC1522); } adapter->stats.symerrs += E1000_READ_REG(hw, SYMERRS); @@ -3270,12 +3504,12 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.tpr += E1000_READ_REG(hw, TPR); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64); - adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127); - adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255); - adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511); - adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023); - adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522); + adapter->stats.ptc64 += E1000_READ_REG(hw, PTC64); + adapter->stats.ptc127 += E1000_READ_REG(hw, PTC127); + adapter->stats.ptc255 += E1000_READ_REG(hw, PTC255); + adapter->stats.ptc511 += E1000_READ_REG(hw, PTC511); + adapter->stats.ptc1023 += E1000_READ_REG(hw, PTC1023); + adapter->stats.ptc1522 += E1000_READ_REG(hw, PTC1522); } adapter->stats.mptc += E1000_READ_REG(hw, MPTC); @@ -3301,18 +3535,17 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC); if (adapter->hw.mac_type != e1000_ich8lan) { - adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); - adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); - adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); - adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); - adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); - adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); - adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); + adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); + adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); + adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); + adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); + adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); + adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); + adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); } } /* Fill out the OS statistics structure */ - adapter->net_stats.rx_packets = adapter->stats.gprc; adapter->net_stats.tx_packets = adapter->stats.gptc; adapter->net_stats.rx_bytes = adapter->stats.gorcl; @@ -3328,16 +3561,15 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; - adapter->net_stats.rx_length_errors = adapter->stats.ruc + - adapter->stats.roc; + adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc; + adapter->net_stats.rx_length_errors = adapter->stats.rlerrc; adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; adapter->net_stats.rx_missed_errors = adapter->stats.mpc; /* Tx Errors */ - - adapter->net_stats.tx_errors = adapter->stats.ecol + - adapter->stats.latecol; + adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol; + adapter->net_stats.tx_errors = adapter->stats.txerrc; adapter->net_stats.tx_aborted_errors = adapter->stats.ecol; adapter->net_stats.tx_window_errors = adapter->stats.latecol; adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs; @@ -3345,7 +3577,6 @@ e1000_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ /* Phy Stats */ - if (hw->media_type == e1000_media_type_copper) { if ((adapter->link_speed == SPEED_1000) && (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) { @@ -3361,16 +3592,104 @@ e1000_update_stats(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } +#ifdef CONFIG_PCI_MSI + +/** + * e1000_intr_msi - Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ + +static +irqreturn_t e1000_intr_msi(int irq, void *data) +{ + struct net_device *netdev = data; + struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; +#ifndef CONFIG_E1000_NAPI + int i; +#endif + + /* this code avoids the read of ICR but has to get 1000 interrupts + * at every link change event before it will notice the change */ + if (++adapter->detect_link >= 1000) { + uint32_t icr = E1000_READ_REG(hw, ICR); +#ifdef CONFIG_E1000_NAPI + /* read ICR disables interrupts using IAM, so keep up with our + * enable/disable accounting */ + atomic_inc(&adapter->irq_sem); +#endif + adapter->detect_link = 0; + if ((icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) && + (icr & E1000_ICR_INT_ASSERTED)) { + hw->get_link_status = 1; + /* 80003ES2LAN workaround-- + * For packet buffer work-around on link down event; + * disable receives here in the ISR and + * reset adapter in watchdog + */ + if (netif_carrier_ok(netdev) && + (adapter->hw.mac_type == e1000_80003es2lan)) { + /* disable receives */ + uint32_t rctl = E1000_READ_REG(hw, RCTL); + E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); + } + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, + jiffies + 1); + } + } else { + E1000_WRITE_REG(hw, ICR, (0xffffffff & ~(E1000_ICR_RXSEQ | + E1000_ICR_LSC))); + /* bummer we have to flush here, but things break otherwise as + * some event appears to be lost or delayed and throughput + * drops. In almost all tests this flush is un-necessary */ + E1000_WRITE_FLUSH(hw); +#ifdef CONFIG_E1000_NAPI + /* Interrupt Auto-Mask (IAM)...upon writing ICR, interrupts are + * masked. No need for the IMC write, but it does mean we + * should account for it ASAP. */ + atomic_inc(&adapter->irq_sem); +#endif + } + +#ifdef CONFIG_E1000_NAPI + if (likely(netif_rx_schedule_prep(netdev))) { + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; + __netif_rx_schedule(netdev); + } else + e1000_irq_enable(adapter); +#else + adapter->total_tx_bytes = 0; + adapter->total_rx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_packets = 0; + + for (i = 0; i < E1000_MAX_INTR; i++) + if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & + !e1000_clean_tx_irq(adapter, adapter->tx_ring))) + break; + + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); +#endif + + return IRQ_HANDLED; +} +#endif /** * e1000_intr - Interrupt Handler * @irq: interrupt number * @data: pointer to a network interface device structure - * @pt_regs: CPU registers structure **/ static irqreturn_t -e1000_intr(int irq, void *data, struct pt_regs *regs) +e1000_intr(int irq, void *data) { struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); @@ -3378,7 +3697,17 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) uint32_t rctl, icr = E1000_READ_REG(hw, ICR); #ifndef CONFIG_E1000_NAPI int i; -#else +#endif + if (unlikely(!icr)) + return IRQ_NONE; /* Not our interrupt */ + +#ifdef CONFIG_E1000_NAPI + /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is + * not set, then the adapter didn't send an interrupt */ + if (unlikely(hw->mac_type >= e1000_82571 && + !(icr & E1000_ICR_INT_ASSERTED))) + return IRQ_NONE; + /* Interrupt Auto-Mask...upon reading ICR, * interrupts are masked. No need for the * IMC write, but it does mean we should @@ -3387,14 +3716,6 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) atomic_inc(&adapter->irq_sem); #endif - if (unlikely(!icr)) { -#ifdef CONFIG_E1000_NAPI - if (hw->mac_type >= e1000_82571) - e1000_irq_enable(adapter); -#endif - return IRQ_NONE; /* Not our interrupt */ - } - if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) { hw->get_link_status = 1; /* 80003ES2LAN workaround-- @@ -3408,18 +3729,27 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) rctl = E1000_READ_REG(hw, RCTL); E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN); } - mod_timer(&adapter->watchdog_timer, jiffies); + /* guard against interrupt when we're going down */ + if (!test_bit(__E1000_DOWN, &adapter->flags)) + mod_timer(&adapter->watchdog_timer, jiffies + 1); } #ifdef CONFIG_E1000_NAPI if (unlikely(hw->mac_type < e1000_82571)) { + /* disable interrupts, without the synchronize_irq bit */ atomic_inc(&adapter->irq_sem); E1000_WRITE_REG(hw, IMC, ~0); E1000_WRITE_FLUSH(hw); } - if (likely(netif_rx_schedule_prep(netdev))) + if (likely(netif_rx_schedule_prep(netdev))) { + adapter->total_tx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_bytes = 0; + adapter->total_rx_packets = 0; __netif_rx_schedule(netdev); - else + } else + /* this really should not happen! if it does it is basically a + * bug, but not a hard error, so enable ints and continue */ e1000_irq_enable(adapter); #else /* Writing IMC and IMS is needed for 82547. @@ -3437,16 +3767,23 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) E1000_WRITE_REG(hw, IMC, ~0); } + adapter->total_tx_bytes = 0; + adapter->total_rx_bytes = 0; + adapter->total_tx_packets = 0; + adapter->total_rx_packets = 0; + for (i = 0; i < E1000_MAX_INTR; i++) if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) & !e1000_clean_tx_irq(adapter, adapter->tx_ring))) break; + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); + if (hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2) e1000_irq_enable(adapter); #endif - return IRQ_HANDLED; } @@ -3490,6 +3827,8 @@ e1000_clean(struct net_device *poll_dev, int *budget) if ((!tx_cleaned && (work_done == 0)) || !netif_running(poll_dev)) { quit_polling: + if (likely(adapter->itr_setting & 3)) + e1000_set_itr(adapter); netif_rx_complete(poll_dev); e1000_irq_enable(adapter); return 0; @@ -3516,6 +3855,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, unsigned int count = 0; #endif boolean_t cleaned = FALSE; + unsigned int total_tx_bytes=0, total_tx_packets=0; i = tx_ring->next_to_clean; eop = tx_ring->buffer_info[i].next_to_watch; @@ -3527,13 +3867,19 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); + if (cleaned) { + /* this packet count is wrong for TSO but has a + * tendency to make dynamic ITR change more + * towards bulk */ + total_tx_packets++; + total_tx_bytes += buffer_info->skb->len; + } e1000_unmap_and_free_tx_resource(adapter, buffer_info); - memset(tx_desc, 0, sizeof(struct e1000_tx_desc)); + tx_desc->upper.data = 0; if (unlikely(++i == tx_ring->count)) i = 0; } - eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); #ifdef CONFIG_E1000_NAPI @@ -3546,13 +3892,16 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, tx_ring->next_to_clean = i; #define TX_WAKE_THRESHOLD 32 - if (unlikely(cleaned && netif_queue_stopped(netdev) && - netif_carrier_ok(netdev))) { - spin_lock(&tx_ring->tx_lock); - if (netif_queue_stopped(netdev) && - (E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) + if (unlikely(cleaned && netif_carrier_ok(netdev) && + E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (netif_queue_stopped(netdev)) { netif_wake_queue(netdev); - spin_unlock(&tx_ring->tx_lock); + ++adapter->restart_queue; + } } if (adapter->detect_tx_hung) { @@ -3590,6 +3939,8 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter, netif_stop_queue(netdev); } } + adapter->total_tx_bytes += total_tx_bytes; + adapter->total_tx_packets += total_tx_packets; return cleaned; } @@ -3669,6 +4020,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, unsigned int i; int cleaned_count = 0; boolean_t cleaned = FALSE; + unsigned int total_rx_bytes=0, total_rx_packets=0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC(*rx_ring, i); @@ -3677,6 +4029,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, while (rx_desc->status & E1000_RXD_STAT_DD) { struct sk_buff *skb; u8 status; + #ifdef CONFIG_E1000_NAPI if (*work_done >= work_to_do) break; @@ -3703,9 +4056,6 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->length); - /* adjust length to remove Ethernet CRC */ - length -= 4; - if (unlikely(!(status & E1000_RXD_STAT_EOP))) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" @@ -3733,6 +4083,14 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, } } + /* adjust length to remove Ethernet CRC, this must be + * done after the TBI_ACCEPT workaround above */ + length -= 4; + + /* probably a little skewed due to removing CRC */ + total_rx_bytes += length; + total_rx_packets++; + /* code added for copybreak, this should improve * performance for small packets with large amounts * of reassembly being done in the stack */ @@ -3748,12 +4106,11 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter, /* save the skb in buffer_info as good */ buffer_info->skb = skb; skb = new_skb; - skb_put(skb, length); } - } else - skb_put(skb, length); - + /* else just continue with the old one */ + } /* end copybreak code */ + skb_put(skb, length); /* Receive Checksum Offload */ e1000_rx_checksum(adapter, @@ -3802,6 +4159,8 @@ next_desc: if (cleaned_count) adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count); + adapter->total_rx_packets += total_rx_packets; + adapter->total_rx_bytes += total_rx_bytes; return cleaned; } @@ -3831,6 +4190,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, uint32_t length, staterr; int cleaned_count = 0; boolean_t cleaned = FALSE; + unsigned int total_rx_bytes=0, total_rx_packets=0; i = rx_ring->next_to_clean; rx_desc = E1000_RX_DESC_PS(*rx_ring, i); @@ -3915,7 +4275,7 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, goto copydone; } /* if */ } - + for (j = 0; j < adapter->rx_ps_pages; j++) { if (!(length= le16_to_cpu(rx_desc->wb.upper.length[j]))) break; @@ -3935,6 +4295,9 @@ e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pskb_trim(skb, skb->len - 4); copydone: + total_rx_bytes += skb->len; + total_rx_packets++; + e1000_rx_checksum(adapter, staterr, le16_to_cpu(rx_desc->wb.lower.hi_dword.csum_ip.csum), skb); skb->protocol = eth_type_trans(skb, netdev); @@ -3983,6 +4346,8 @@ next_desc: if (cleaned_count) adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count); + adapter->total_rx_packets += total_rx_packets; + adapter->total_rx_bytes += total_rx_bytes; return cleaned; } @@ -4150,7 +4515,7 @@ e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, } skb = netdev_alloc_skb(netdev, - adapter->rx_ps_bsize0 + NET_IP_ALIGN); + adapter->rx_ps_bsize0 + NET_IP_ALIGN); if (unlikely(!skb)) { adapter->alloc_rx_buff_failed++; @@ -4412,13 +4777,20 @@ e1000_write_pci_cfg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) pci_write_config_word(adapter->pdev, reg, *value); } -#if 0 -uint32_t -e1000_io_read(struct e1000_hw *hw, unsigned long port) +int32_t +e1000_read_pcie_cap_reg(struct e1000_hw *hw, uint32_t reg, uint16_t *value) { - return inl(port); + struct e1000_adapter *adapter = hw->back; + uint16_t cap_offset; + + cap_offset = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP); + if (!cap_offset) + return -E1000_ERR_CONFIG; + + pci_read_config_word(adapter->pdev, cap_offset + reg, value); + + return E1000_SUCCESS; } -#endif /* 0 */ void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value) @@ -4442,12 +4814,12 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); if (adapter->hw.mac_type != e1000_ich8lan) { - /* enable VLAN receive filtering */ - rctl = E1000_READ_REG(&adapter->hw, RCTL); - rctl |= E1000_RCTL_VFE; - rctl &= ~E1000_RCTL_CFIEN; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - e1000_update_mng_vlan(adapter); + /* enable VLAN receive filtering */ + rctl = E1000_READ_REG(&adapter->hw, RCTL); + rctl |= E1000_RCTL_VFE; + rctl &= ~E1000_RCTL_CFIEN; + E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + e1000_update_mng_vlan(adapter); } } else { /* disable VLAN tag insert/strip */ @@ -4456,14 +4828,16 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) E1000_WRITE_REG(&adapter->hw, CTRL, ctrl); if (adapter->hw.mac_type != e1000_ich8lan) { - /* disable VLAN filtering */ - rctl = E1000_READ_REG(&adapter->hw, RCTL); - rctl &= ~E1000_RCTL_VFE; - E1000_WRITE_REG(&adapter->hw, RCTL, rctl); - if (adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) { - e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); - adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; - } + /* disable VLAN filtering */ + rctl = E1000_READ_REG(&adapter->hw, RCTL); + rctl &= ~E1000_RCTL_VFE; + E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + if (adapter->mng_vlan_id != + (uint16_t)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, + adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + } } } @@ -4693,10 +5067,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) pci_enable_wake(pdev, PCI_D3cold, 0); } - /* FIXME: this code is incorrect for PCI Express */ if (adapter->hw.mac_type >= e1000_82540 && - adapter->hw.mac_type != e1000_ich8lan && - adapter->hw.media_type == e1000_media_type_copper) { + adapter->hw.mac_type < e1000_82571 && + adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); if (manc & E1000_MANC_SMBUS_EN) { manc |= E1000_MANC_ARP_EN; @@ -4709,6 +5082,9 @@ e1000_suspend(struct pci_dev *pdev, pm_message_t state) if (adapter->hw.phy_type == e1000_phy_igp_3) e1000_phy_powerdown_workaround(&adapter->hw); + if (netif_running(netdev)) + e1000_free_irq(adapter); + /* Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000_release_hw_control(adapter); @@ -4739,6 +5115,10 @@ e1000_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); + if (netif_running(netdev) && (err = e1000_request_irq(adapter))) + return err; + + e1000_power_up_phy(adapter); e1000_reset(adapter); E1000_WRITE_REG(&adapter->hw, WUS, ~0); @@ -4747,10 +5127,9 @@ e1000_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* FIXME: this code is incorrect for PCI Express */ if (adapter->hw.mac_type >= e1000_82540 && - adapter->hw.mac_type != e1000_ich8lan && - adapter->hw.media_type == e1000_media_type_copper) { + adapter->hw.mac_type < e1000_82571 && + adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); manc &= ~(E1000_MANC_ARP_EN); E1000_WRITE_REG(&adapter->hw, MANC, manc); @@ -4785,7 +5164,7 @@ e1000_netpoll(struct net_device *netdev) struct e1000_adapter *adapter = netdev_priv(netdev); disable_irq(adapter->pdev->irq); - e1000_intr(adapter->pdev->irq, netdev, NULL); + e1000_intr(adapter->pdev->irq, netdev); e1000_clean_tx_irq(adapter, adapter->tx_ring); #ifndef CONFIG_E1000_NAPI adapter->clean_rx(adapter, adapter->rx_ring); @@ -4835,12 +5214,8 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) } pci_set_master(pdev); - pci_enable_wake(pdev, 3, 0); - pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */ - - /* Perform card reset only on one instance of the card */ - if (PCI_FUNC (pdev->devfn) != 0) - return PCI_ERS_RESULT_RECOVERED; + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); e1000_reset(adapter); E1000_WRITE_REG(&adapter->hw, WUS, ~0); @@ -4872,6 +5247,7 @@ static void e1000_io_resume(struct pci_dev *pdev) netif_device_attach(netdev); if (adapter->hw.mac_type >= e1000_82540 && + adapter->hw.mac_type < e1000_82571 && adapter->hw.media_type == e1000_media_type_copper) { manc = E1000_READ_REG(&adapter->hw, MANC); manc &= ~(E1000_MANC_ARP_EN); diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 46bc49df15e..18afc0c25da 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -108,17 +107,16 @@ typedef enum { #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS) -#define E1000_WRITE_ICH8_REG(a, reg, value) ( \ +#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \ writel((value), ((a)->flash_address + reg))) -#define E1000_READ_ICH8_REG(a, reg) ( \ +#define E1000_READ_ICH_FLASH_REG(a, reg) ( \ readl((a)->flash_address + reg)) -#define E1000_WRITE_ICH8_REG16(a, reg, value) ( \ +#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \ writew((value), ((a)->flash_address + reg))) -#define E1000_READ_ICH8_REG16(a, reg) ( \ +#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \ readw((a)->flash_address + reg)) - #endif /* _E1000_OSDEP_H_ */ diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index 21284273897..cbfcd7f2889 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -1,25 +1,24 @@ /******************************************************************************* - - Copyright(c) 1999 - 2006 Intel Corporation. All rights reserved. - - This program is free software; you can redistribute it and/or modify it - under the terms of the GNU General Public License as published by the Free - Software Foundation; either version 2 of the License, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, but WITHOUT - ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2006 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - + You should have received a copy of the GNU General Public License along with - this program; if not, write to the Free Software Foundation, Inc., 59 - Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - The full GNU General Public License is included in this distribution in the - file called LICENSE. - + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + Contact Information: Linux NICS <linux.nics@intel.com> e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> @@ -45,16 +44,6 @@ */ #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } -/* Module Parameters are always initialized to -1, so that the driver - * can tell the difference between no user specified value or the - * user asking for the default value. - * The true default values are loaded in when e1000_check_options is called. - * - * This is a GCC extension to ANSI C. - * See the item "Labeled Elements in Initializers" in the section - * "Extensions to the C Language Family" of the GCC documentation. - */ - #define E1000_PARAM(X, desc) \ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ static int num_##X = 0; \ @@ -68,7 +57,6 @@ * * Default Value: 256 */ - E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); /* Receive Descriptor Count @@ -78,7 +66,6 @@ E1000_PARAM(TxDescriptors, "Number of transmit descriptors"); * * Default Value: 256 */ - E1000_PARAM(RxDescriptors, "Number of receive descriptors"); /* User Specified Speed Override @@ -91,7 +78,6 @@ E1000_PARAM(RxDescriptors, "Number of receive descriptors"); * * Default Value: 0 */ - E1000_PARAM(Speed, "Speed setting"); /* User Specified Duplex Override @@ -103,7 +89,6 @@ E1000_PARAM(Speed, "Speed setting"); * * Default Value: 0 */ - E1000_PARAM(Duplex, "Duplex setting"); /* Auto-negotiation Advertisement Override @@ -120,8 +105,9 @@ E1000_PARAM(Duplex, "Duplex setting"); * * Default Value: 0x2F (copper); 0x20 (fiber) */ - E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); +#define AUTONEG_ADV_DEFAULT 0x2F +#define AUTONEG_ADV_MASK 0x2F /* User Specified Flow Control Override * @@ -133,8 +119,8 @@ E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting"); * * Default Value: Read flow control settings from the EEPROM */ - E1000_PARAM(FlowControl, "Flow Control setting"); +#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL /* XsumRX - Receive Checksum Offload Enable/Disable * @@ -145,53 +131,54 @@ E1000_PARAM(FlowControl, "Flow Control setting"); * * Default Value: 1 */ - E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload"); /* Transmit Interrupt Delay in units of 1.024 microseconds + * Tx interrupt delay needs to typically be set to something non zero * * Valid Range: 0-65535 - * - * Default Value: 64 */ - E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay"); +#define DEFAULT_TIDV 8 +#define MAX_TXDELAY 0xFFFF +#define MIN_TXDELAY 0 /* Transmit Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 - * - * Default Value: 0 */ - E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); +#define DEFAULT_TADV 32 +#define MAX_TXABSDELAY 0xFFFF +#define MIN_TXABSDELAY 0 /* Receive Interrupt Delay in units of 1.024 microseconds + * hardware will likely hang if you set this to anything but zero. * * Valid Range: 0-65535 - * - * Default Value: 0 */ - E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); +#define DEFAULT_RDTR 0 +#define MAX_RXDELAY 0xFFFF +#define MIN_RXDELAY 0 /* Receive Absolute Interrupt Delay in units of 1.024 microseconds * * Valid Range: 0-65535 - * - * Default Value: 128 */ - E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); +#define DEFAULT_RADV 8 +#define MAX_RXABSDELAY 0xFFFF +#define MIN_RXABSDELAY 0 /* Interrupt Throttle Rate (interrupts/sec) * - * Valid Range: 100-100000 (0=off, 1=dynamic) - * - * Default Value: 8000 + * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) */ - E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); +#define DEFAULT_ITR 3 +#define MAX_ITR 100000 +#define MIN_ITR 100 /* Enable Smart Power Down of the PHY * @@ -199,7 +186,6 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); * * Default Value: 0 (disabled) */ - E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); /* Enable Kumeran Lock Loss workaround @@ -208,33 +194,8 @@ E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); * * Default Value: 1 (enabled) */ - E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); -#define AUTONEG_ADV_DEFAULT 0x2F -#define AUTONEG_ADV_MASK 0x2F -#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL - -#define DEFAULT_RDTR 0 -#define MAX_RXDELAY 0xFFFF -#define MIN_RXDELAY 0 - -#define DEFAULT_RADV 128 -#define MAX_RXABSDELAY 0xFFFF -#define MIN_RXABSDELAY 0 - -#define DEFAULT_TIDV 64 -#define MAX_TXDELAY 0xFFFF -#define MIN_TXDELAY 0 - -#define DEFAULT_TADV 64 -#define MAX_TXABSDELAY 0xFFFF -#define MIN_TXABSDELAY 0 - -#define DEFAULT_ITR 8000 -#define MAX_ITR 100000 -#define MIN_ITR 100 - struct e1000_option { enum { enable_option, range_option, list_option } type; char *name; @@ -397,17 +358,17 @@ e1000_check_options(struct e1000_adapter *adapter) { /* Flow Control */ struct e1000_opt_list fc_list[] = - {{ e1000_fc_none, "Flow Control Disabled" }, - { e1000_fc_rx_pause,"Flow Control Receive Only" }, - { e1000_fc_tx_pause,"Flow Control Transmit Only" }, - { e1000_fc_full, "Flow Control Enabled" }, - { e1000_fc_default, "Flow Control Hardware Default" }}; + {{ E1000_FC_NONE, "Flow Control Disabled" }, + { E1000_FC_RX_PAUSE,"Flow Control Receive Only" }, + { E1000_FC_TX_PAUSE,"Flow Control Transmit Only" }, + { E1000_FC_FULL, "Flow Control Enabled" }, + { E1000_FC_DEFAULT, "Flow Control Hardware Default" }}; struct e1000_option opt = { .type = list_option, .name = "Flow Control", .err = "reading default settings from EEPROM", - .def = e1000_fc_default, + .def = E1000_FC_DEFAULT, .arg = { .l = { .nr = ARRAY_SIZE(fc_list), .p = fc_list }} }; @@ -511,15 +472,27 @@ e1000_check_options(struct e1000_adapter *adapter) break; case 1: DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", - opt.name); + opt.name); + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; + break; + case 3: + DPRINTK(PROBE, INFO, + "%s set to dynamic conservative mode\n", + opt.name); + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; break; default: e1000_validate_option(&adapter->itr, &opt, - adapter); + adapter); + /* save the setting, because the dynamic bits change itr */ + adapter->itr_setting = adapter->itr; break; } } else { - adapter->itr = opt.def; + adapter->itr_setting = opt.def; + adapter->itr = 20000; } } { /* Smart Power Down */ |