diff options
Diffstat (limited to 'drivers/net/e1000e/82571.c')
| -rw-r--r-- | drivers/net/e1000e/82571.c | 1351 |
1 files changed, 1351 insertions, 0 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c new file mode 100644 index 00000000000..cf70522fc85 --- /dev/null +++ b/drivers/net/e1000e/82571.c @@ -0,0 +1,1351 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* + * 82571EB Gigabit Ethernet Controller + * 82571EB Gigabit Ethernet Controller (Fiber) + * 82572EI Gigabit Ethernet Controller (Copper) + * 82572EI Gigabit Ethernet Controller (Fiber) + * 82572EI Gigabit Ethernet Controller + * 82573V Gigabit Ethernet Controller (Copper) + * 82573E Gigabit Ethernet Controller (Copper) + * 82573L Gigabit Ethernet Controller + */ + +#include <linux/netdevice.h> +#include <linux/delay.h> +#include <linux/pci.h> + +#include "e1000.h" + +#define ID_LED_RESERVED_F746 0xF746 +#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_OFF1_ON2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) + +#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000 + +static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); +static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); +static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); +static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); +static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); +static s32 e1000_setup_link_82571(struct e1000_hw *hw); +static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); + +/** + * e1000_init_phy_params_82571 - Init PHY func ptrs. + * @hw: pointer to the HW structure + * + * This is a function pointer entry point called by the api module. + **/ +static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + + if (hw->media_type != e1000_media_type_copper) { + phy->type = e1000_phy_none; + return 0; + } + + phy->addr = 1; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; + + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + phy->type = e1000_phy_igp_2; + break; + case e1000_82573: + phy->type = e1000_phy_m88; + break; + default: + return -E1000_ERR_PHY; + break; + } + + /* This can only be done after all function pointers are setup. */ + ret_val = e1000_get_phy_id_82571(hw); + + /* Verify phy id */ + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + if (phy->id != IGP01E1000_I_PHY_ID) + return -E1000_ERR_PHY; + break; + case e1000_82573: + if (phy->id != M88E1111_I_PHY_ID) + return -E1000_ERR_PHY; + break; + default: + return -E1000_ERR_PHY; + break; + } + + return 0; +} + +/** + * e1000_init_nvm_params_82571 - Init NVM func ptrs. + * @hw: pointer to the HW structure + * + * This is a function pointer entry point called by the api module. + **/ +static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 eecd = er32(EECD); + u16 size; + + nvm->opcode_bits = 8; + nvm->delay_usec = 1; + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8; + break; + } + + switch (hw->mac.type) { + case e1000_82573: + if (((eecd >> 15) & 0x3) == 0x3) { + nvm->type = e1000_nvm_flash_hw; + nvm->word_size = 2048; + /* Autonomous Flash update bit must be cleared due + * to Flash update issue. + */ + eecd &= ~E1000_EECD_AUPDEN; + ew32(EECD, eecd); + break; + } + /* Fall Through */ + default: + nvm->type = e1000_nvm_eeprom_spi; + size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); + /* Added to a constant, "size" becomes the left-shift value + * for setting word_size. + */ + size += NVM_WORD_SIZE_BASE_SHIFT; + nvm->word_size = 1 << size; + break; + } + + return 0; +} + +/** + * e1000_init_mac_params_82571 - Init MAC func ptrs. + * @hw: pointer to the HW structure + * + * This is a function pointer entry point called by the api module. + **/ +static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_mac_info *mac = &hw->mac; + struct e1000_mac_operations *func = &mac->ops; + + /* Set media type */ + switch (adapter->pdev->device) { + case E1000_DEV_ID_82571EB_FIBER: + case E1000_DEV_ID_82572EI_FIBER: + case E1000_DEV_ID_82571EB_QUAD_FIBER: + hw->media_type = e1000_media_type_fiber; + break; + case E1000_DEV_ID_82571EB_SERDES: + case E1000_DEV_ID_82572EI_SERDES: + hw->media_type = e1000_media_type_internal_serdes; + break; + default: + hw->media_type = e1000_media_type_copper; + break; + } + + /* Set mta register count */ + mac->mta_reg_count = 128; + /* Set rar entry count */ + mac->rar_entry_count = E1000_RAR_ENTRIES; + /* Set if manageability features are enabled. */ + mac->arc_subsystem_valid = + (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; + + /* check for link */ + switch (hw->media_type) { + case e1000_media_type_copper: + func->setup_physical_interface = e1000_setup_copper_link_82571; + func->check_for_link = e1000e_check_for_copper_link; + func->get_link_up_info = e1000e_get_speed_and_duplex_copper; + break; + case e1000_media_type_fiber: + func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571; + func->check_for_link = e1000e_check_for_fiber_link; + func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes; + break; + case e1000_media_type_internal_serdes: + func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571; + func->check_for_link = e1000e_check_for_serdes_link; + func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes; + break; + default: + return -E1000_ERR_CONFIG; + break; + } + + return 0; +} + +static s32 e1000_get_invariants_82571(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + static int global_quad_port_a; /* global port a indication */ + struct pci_dev *pdev = adapter->pdev; + u16 eeprom_data = 0; + int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1; + s32 rc; + + rc = e1000_init_mac_params_82571(adapter); + if (rc) + return rc; + + rc = e1000_init_nvm_params_82571(hw); + if (rc) + return rc; + + rc = e1000_init_phy_params_82571(hw); + if (rc) + return rc; + + /* tag quad port adapters first, it's used below */ + switch (pdev->device) { + case E1000_DEV_ID_82571EB_QUAD_COPPER: + case E1000_DEV_ID_82571EB_QUAD_FIBER: + case E1000_DEV_ID_82571EB_QUAD_COPPER_LP: + adapter->flags |= FLAG_IS_QUAD_PORT; + /* mark the first port */ + if (global_quad_port_a == 0) + adapter->flags |= FLAG_IS_QUAD_PORT_A; + /* Reset for multiple quad port adapters */ + global_quad_port_a++; + if (global_quad_port_a == 4) + global_quad_port_a = 0; + break; + default: + break; + } + + switch (adapter->hw.mac.type) { + case e1000_82571: + /* these dual ports don't have WoL on port B at all */ + if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) || + (pdev->device == E1000_DEV_ID_82571EB_SERDES) || + (pdev->device == E1000_DEV_ID_82571EB_COPPER)) && + (is_port_b)) + adapter->flags &= ~FLAG_HAS_WOL; + /* quad ports only support WoL on port A */ + if (adapter->flags & FLAG_IS_QUAD_PORT && + (!adapter->flags & FLAG_IS_QUAD_PORT_A)) + adapter->flags &= ~FLAG_HAS_WOL; + break; + + case e1000_82573: + if (pdev->device == E1000_DEV_ID_82573L) { + e1000_read_nvm(&adapter->hw, NVM_INIT_3GIO_3, 1, + &eeprom_data); + if (eeprom_data & NVM_WORD1A_ASPM_MASK) + adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES; + } + break; + default: + break; + } + + return 0; +} + +/** + * e1000_get_phy_id_82571 - Retrieve the PHY ID and revision + * @hw: pointer to the HW structure + * + * Reads the PHY registers and stores the PHY ID and possibly the PHY + * revision in the hardware structure. + **/ +static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + /* The 82571 firmware may still be configuring the PHY. + * In this case, we cannot access the PHY until the + * configuration is done. So we explicitly set the + * PHY ID. */ + phy->id = IGP01E1000_I_PHY_ID; + break; + case e1000_82573: + return e1000e_get_phy_id(hw); + break; + default: + return -E1000_ERR_PHY; + break; + } + + return 0; +} + +/** + * e1000_get_hw_semaphore_82571 - Acquire hardware semaphore + * @hw: pointer to the HW structure + * + * Acquire the HW semaphore to access the PHY or NVM + **/ +static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) +{ + u32 swsm; + s32 timeout = hw->nvm.word_size + 1; + s32 i = 0; + + /* Get the FW semaphore. */ + for (i = 0; i < timeout; i++) { + swsm = er32(SWSM); + ew32(SWSM, swsm | E1000_SWSM_SWESMBI); + + /* Semaphore acquired if bit latched */ + if (er32(SWSM) & E1000_SWSM_SWESMBI) + break; + + udelay(50); + } + + if (i == timeout) { + /* Release semaphores */ + e1000e_put_hw_semaphore(hw); + hw_dbg(hw, "Driver can't access the NVM\n"); + return -E1000_ERR_NVM; + } + + return 0; +} + +/** + * e1000_put_hw_semaphore_82571 - Release hardware semaphore + * @hw: pointer to the HW structure + * + * Release hardware semaphore used to access the PHY or NVM + **/ +static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw) +{ + u32 swsm; + + swsm = er32(SWSM); + + swsm &= ~E1000_SWSM_SWESMBI; + + ew32(SWSM, swsm); +} + +/** + * e1000_acquire_nvm_82571 - Request for access to the EEPROM + * @hw: pointer to the HW structure + * + * To gain access to the EEPROM, first we must obtain a hardware semaphore. + * Then for non-82573 hardware, set the EEPROM access request bit and wait + * for EEPROM access grant bit. If the access grant bit is not set, release + * hardware semaphore. + **/ +static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw) +{ + s32 ret_val; + + ret_val = e1000_get_hw_semaphore_82571(hw); + if (ret_val) + return ret_val; + + if (hw->mac.type != e1000_82573) + ret_val = e1000e_acquire_nvm(hw); + + if (ret_val) + e1000_put_hw_semaphore_82571(hw); + + return ret_val; +} + +/** + * e1000_release_nvm_82571 - Release exclusive access to EEPROM + * @hw: pointer to the HW structure + * + * Stop any current commands to the EEPROM and clear the EEPROM request bit. + **/ +static void e1000_release_nvm_82571(struct e1000_hw *hw) +{ + e1000e_release_nvm(hw); + e1000_put_hw_semaphore_82571(hw); +} + +/** + * e1000_write_nvm_82571 - Write to EEPROM using appropriate interface + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * For non-82573 silicon, write data to EEPROM at offset using SPI interface. + * + * If e1000e_update_nvm_checksum is not called after this function, the + * EEPROM will most likley contain an invalid checksum. + **/ +static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, + u16 *data) +{ + s32 ret_val; + + switch (hw->mac.type) { + case e1000_82573: + ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data); + break; + case e1000_82571: + case e1000_82572: + ret_val = e1000e_write_nvm_spi(hw, offset, words, data); + break; + default: + ret_val = -E1000_ERR_NVM; + break; + } + + return ret_val; +} + +/** + * e1000_update_nvm_checksum_82571 - Update EEPROM checksum + * @hw: pointer to the HW structure + * + * Updates the EEPROM checksum by reading/adding each word of the EEPROM + * up to the checksum. Then calculates the EEPROM checksum and writes the + * value to the EEPROM. + **/ +static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw) +{ + u32 eecd; + s32 ret_val; + u16 i; + + ret_val = e1000e_update_nvm_checksum_generic(hw); + if (ret_val) + return ret_val; + + /* If our nvm is an EEPROM, then we're done + * otherwise, commit the checksum to the flash NVM. */ + if (hw->nvm.type != e1000_nvm_flash_hw) + return ret_val; + + /* Check for pending operations. */ + for (i = 0; i < E1000_FLASH_UPDATES; i++) { + msleep(1); + if ((er32(EECD) & E1000_EECD_FLUPD) == 0) + break; + } + + if (i == E1000_FLASH_UPDATES) + return -E1000_ERR_NVM; + + /* Reset the firmware if using STM opcode. */ + if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) { + /* The enabling of and the actual reset must be done + * in two write cycles. + */ + ew32(HICR, E1000_HICR_FW_RESET_ENABLE); + e1e_flush(); + ew32(HICR, E1000_HICR_FW_RESET); + } + + /* Commit the write to flash */ + eecd = er32(EECD) | E1000_EECD_FLUPD; + ew32(EECD, eecd); + + for (i = 0; i < E1000_FLASH_UPDATES; i++) { + msleep(1); + if ((er32(EECD) & E1000_EECD_FLUPD) == 0) + break; + } + + if (i == E1000_FLASH_UPDATES) + return -E1000_ERR_NVM; + + return 0; +} + +/** + * e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum + * @hw: pointer to the HW structure + * + * Calculates the EEPROM checksum by reading/adding each word of the EEPROM + * and then verifies that the sum of the EEPROM is equal to 0xBABA. + **/ +static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw) +{ + if (hw->nvm.type == e1000_nvm_flash_hw) + e1000_fix_nvm_checksum_82571(hw); + + return e1000e_validate_nvm_checksum_generic(hw); +} + +/** + * e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon + * @hw: pointer to the HW structure + * @offset: offset within the EEPROM to be written to + * @words: number of words to write + * @data: 16 bit word(s) to be written to the EEPROM + * + * After checking for invalid values, poll the EEPROM to ensure the previous + * command has completed before trying to write the next word. After write + * poll for completion. + * + * If e1000e_update_nvm_checksum is not called after this function, the + * EEPROM will most likley contain an invalid checksum. + **/ +static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, + u16 words, u16 *data) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + u32 i; + u32 eewr = 0; + s32 ret_val = 0; + + /* A check for invalid values: offset too large, too many words, + * and not enough words. */ + if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || + (words == 0)) { + hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + return -E1000_ERR_NVM; + } + + for (i = 0; i < words; i++) { + eewr = (data[i] << E1000_NVM_RW_REG_DATA) | + ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) | + E1000_NVM_RW_REG_START; + + ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE); + if (ret_val) + break; + + ew32(EEWR, eewr); + + ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE); + if (ret_val) + break; + } + + return ret_val; +} + +/** + * e1000_get_cfg_done_82571 - Poll for configuration done + * @hw: pointer to the HW structure + * + * Reads the management control register for the config done bit to be set. + **/ +static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) +{ + s32 timeout = PHY_CFG_TIMEOUT; + + while (timeout) { + if (er32(EEMNGCTL) & + E1000_NVM_CFG_DONE_PORT_0) + break; + msleep(1); + timeout--; + } + if (!timeout) { + hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + return -E1000_ERR_RESET; + } + + return 0; +} + +/** + * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state + * @hw: pointer to the HW structure + * @active: TRUE to enable LPLU, FALSE to disable + * + * Sets the LPLU D0 state according to the active flag. When activating LPLU + * this function also disables smart speed and vice versa. LPLU will not be + * activated unless the device autonegotiation advertisement meets standards + * of either 10 or 10/100 or 10/100/1000 at all duplexes. This is a function + * pointer entry point only called by PHY setup routines. + **/ +static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + + ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data); + if (ret_val) + return ret_val; + + if (active) { + data |= IGP02E1000_PM_D0_LPLU; + ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); + if (ret_val) + return ret_val; + + /* When LPLU is enabled, we should disable SmartSpeed */ + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data); + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data); + if (ret_val) + return ret_val; + } else { + data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data); + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used + * during Dx states where the power conservation is most + * important. During driver activity we should enable + * SmartSpeed, so performance is maintained. */ + if (phy->smart_speed == e1000_smart_speed_on) { + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } else if (phy->smart_speed == e1000_smart_speed_off) { + ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, + &data); + if (ret_val) + return ret_val; + + data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, + data); + if (ret_val) + return ret_val; + } + } + + return 0; +} + +/** + * e1000_reset_hw_82571 - Reset hardware + * @hw: pointer to the HW structure + * + * This resets the hardware into a known state. This is a + * function pointer entry point called by the api module. + **/ +static s32 e1000_reset_hw_82571(struct e1000_hw *hw) +{ + u32 ctrl; + u32 extcnf_ctrl; + u32 ctrl_ext; + u32 icr; + s32 ret_val; + u16 i = 0; + + /* Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + ret_val = e1000e_disable_pcie_master(hw); + if (ret_val) + hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + + hw_dbg(hw, "Masking off all interrupts\n"); + ew32(IMC, 0xffffffff); + + ew32(RCTL, 0); + ew32(TCTL, E1000_TCTL_PSP); + e1e_flush(); + + msleep(10); + + /* Must acquire the MDIO ownership before MAC reset. + * Ownership defaults to firmware after a reset. */ + if (hw->mac.type == e1000_82573) { + extcnf_ctrl = er32(EXTCNF_CTRL); + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + do { + ew32(EXTCNF_CTRL, extcnf_ctrl); + extcnf_ctrl = er32(EXTCNF_CTRL); + + if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) + break; + + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + msleep(2); + i++; + } while (i < MDIO_OWNERSHIP_TIMEOUT); + } + + ctrl = er32(CTRL); + + hw_dbg(hw, "Issuing a global reset to MAC\n"); + ew32(CTRL, ctrl | E1000_CTRL_RST); + + if (hw->nvm.type == e1000_nvm_flash_hw) { + udelay(10); + ctrl_ext = er32(CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + ew32(CTRL_EXT, ctrl_ext); + e1e_flush(); + } + + ret_val = e1000e_get_auto_rd_done(hw); + if (ret_val) + /* We don't want to continue accessing MAC registers. */ + return ret_val; + + /* Phy configuration from NVM just starts after EECD_AUTO_RD is set. + * Need to wait for Phy configuration completion before accessing + * NVM and Phy. + */ + if (hw->mac.type == e1000_82573) + msleep(25); + + /* Clear any pending interrupt events. */ + ew32(IMC, 0xffffffff); + icr = er32(ICR); + + return 0; +} + +/** + * e1000_init_hw_82571 - Initialize hardware + * @hw: pointer to the HW structure + * + * This inits the hardware readying it for operation. + **/ +static s32 e1000_init_hw_82571(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 reg_data; + s32 ret_val; + u16 i; + u16 rar_count = mac->rar_entry_count; + + e1000_initialize_hw_bits_82571(hw); + + /* Initialize identification LED */ + ret_val = e1000e_id_led_init(hw); + if (ret_val) { + hw_dbg(hw, "Error initializing identification LED\n"); + return ret_val; + } + + /* Disabling VLAN filtering */ + hw_dbg(hw, "Initializing the IEEE VLAN\n"); + e1000e_clear_vfta(hw); + + /* Setup the receive address. */ + /* If, however, a locally administered address was assigned to the + * 82571, we must reserve a RAR for it to work around an issue where + * resetting one port will reload the MAC on the other port. + */ + if (e1000e_get_laa_state_82571(hw)) + rar_count--; + e1000e_init_rx_addrs(hw, rar_count); + + /* Zero out the Multicast HASH table */ + hw_dbg(hw, "Zeroing the MTA\n"); + for (i = 0; i < mac->mta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); + + /* Setup link and flow control */ + ret_val = e1000_setup_link_82571(hw); + + /* Set the transmit descriptor write-back policy */ + reg_data = er32(TXDCTL); + reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | + E1000_TXDCTL_FULL_TX_DESC_WB | + E1000_TXDCTL_COUNT_DESC; + ew32(TXDCTL, reg_data); + + /* ...for both queues. */ + if (mac->type != e1000_82573) { + reg_data = er32(TXDCTL1); + reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | + E1000_TXDCTL_FULL_TX_DESC_WB | + E1000_TXDCTL_COUNT_DESC; + ew32(TXDCTL1, reg_data); + } else { + e1000e_enable_tx_pkt_filtering(hw); + reg_data = er32(GCR); + reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + ew32(GCR, reg_data); + } + + /* Clear all of the statistics registers (clear on read). It is + * important that we do this after we have tried to establish link + * because the symbol error count will increment wildly if there + * is no link. + */ + e1000_clear_hw_cntrs_82571(hw); + + return ret_val; +} + +/** + * e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits + * @hw: pointer to the HW structure + * + * Initializes required hardware-dependent bits needed for normal operation. + **/ +static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) +{ + u32 reg; + + /* Transmit Descriptor Control 0 */ + reg = er32(TXDCTL); + reg |= (1 << 22); + ew32(TXDCTL, reg); + + /* Transmit Descriptor Control 1 */ + reg = er32(TXDCTL1); + reg |= (1 << 22); + ew32(TXDCTL1, reg); + + /* Transmit Arbitration Control 0 */ + reg = er32(TARC0); + reg &= ~(0xF << 27); /* 30:27 */ + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26); + break; + default: + break; + } + ew32(TARC0, reg); + + /* Transmit Arbitration Control 1 */ + reg = er32(TARC1); + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + reg &= ~((1 << 29) | (1 << 30)); + reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26); + if (er32(TCTL) & E1000_TCTL_MULR) + reg &= ~(1 << 28); + else + reg |= (1 << 28); + ew32(TARC1, reg); + break; + default: + break; + } + + /* Device Control */ + if (hw->mac.type == e1000_82573) { + reg = er32(CTRL); + reg &= ~(1 << 29); + ew32(CTRL, reg); + } + + /* Extended Device Control */ + if (hw->mac.type == e1000_82573) { + reg = er32(CTRL_EXT); + reg &= ~(1 << 23); + reg |= (1 << 22); + ew32(CTRL_EXT, reg); + } +} + +/** + * e1000e_clear_vfta - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void e1000e_clear_vfta(struct e1000_hw *hw) +{ + u32 offset; + u32 vfta_value = 0; + u32 vfta_offset = 0; + u32 vfta_bit_in_reg = 0; + + if (hw->mac.type == e1000_82573) { + if (hw->mng_cookie.vlan_id != 0) { + /* The VFTA is a 4096b bit-field, each identifying + * a single VLAN ID. The following operations + * determine which 32b entry (i.e. offset) into the + * array we want to set the VLAN ID (i.e. bit) of + * the manageability unit. + */ + vfta_offset = (hw->mng_cookie.vlan_id >> + E1000_VFTA_ENTRY_SHIFT) & + E1000_VFTA_ENTRY_MASK; + vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & + E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + } + } + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + /* If the offset we want to clear is the same offset of the + * manageability VLAN ID, then clear all bits except that of + * the manageability unit. + */ + vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value); + e1e_flush(); + } +} + +/** + * e1000_mc_addr_list_update_82571 - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @rar_used_count: the first RAR register free to program + * @rar_count: total number of supported Receive Address Registers + * + * Updates the Receive Address Registers and Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + * The parameter rar_count will usually be hw->mac.rar_entry_count + * unless there are workarounds that change this. + **/ +static void e1000_mc_addr_list_update_82571(struct e1000_hw *hw, + u8 *mc_addr_list, + u32 mc_addr_count, + u32 rar_used_count, + u32 rar_count) +{ + if (e1000e_get_laa_state_82571(hw)) + rar_count--; + + e1000e_mc_addr_list_update_generic(hw, mc_addr_list, mc_addr_count, + rar_used_count, rar_count); +} + +/** + * e1000_setup_link_82571 - Setup flow control and link settings + * @hw: pointer to the HW structure + * + * Determines which flow control settings to use, then configures flow + * control. Calls the appropriate media-specific link configuration + * function. Assuming the adapter has a valid link partner, a valid link + * should be established. Assumes the hardware has previously been reset + * and the transmitter and receiver are not enabled. + **/ +static s32 e1000_setup_link_82571(struct e1000_hw *hw) +{ + /* 82573 does not have a word in the NVM to determine + * the default flow control setting, so we explicitly + * set it to full. + */ + if (hw->mac.type == e1000_82573) + hw->mac.fc = e1000_fc_full; + + return e1000e_setup_link(hw); +} + +/** + * e1000_setup_copper_link_82571 - Configure copper link settings + * @hw: pointer to the HW structure + * + * Configures the link for auto-neg or forced speed and duplex. Then we check + * for link, once link is established calls to configure collision distance + * and flow control are called. + **/ +static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw) +{ + u32 ctrl; + u32 led_ctrl; + s32 ret_val; + + ctrl = er32(CTRL); + ctrl |= E1000_CTRL_SLU; + ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX); + ew32(CTRL, ctrl); + + switch (hw->phy.type) { + case e1000_phy_m88: + ret_val = e1000e_copper_link_setup_m88(hw); + break; + case e1000_phy_igp_2: + ret_val = e1000e_copper_link_setup_igp(hw); + /* Setup activity LED */ + led_ctrl = er32(LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + ew32(LEDCTL, led_ctrl); + break; + default: + return -E1000_ERR_PHY; + break; + } + + if (ret_val) + return ret_val; + + ret_val = e1000e_setup_copper_link(hw); + + return ret_val; +} + +/** + * e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes + * @hw: pointer to the HW structure + * + * Configures collision distance and flow control for fiber and serdes links. + * Upon successful setup, poll for link. + **/ +static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) +{ + switch (hw->mac.type) { + case e1000_82571: + case e1000_82572: + /* If SerDes loopback mode is entered, there is no form + * of reset to take the adapter out of that mode. So we + * have to explicitly take the adapter out of loopback + * mode. This prevents drivers from twidling their thumbs + * if another tool failed to take it out of loopback mode. + */ + ew32(SCTL, + E1000_SCTL_DISABLE_SERDES_LOOPBACK); + break; + default: + break; + } + + return e1000e_setup_fiber_serdes_link(hw); +} + +/** + * e1000_valid_led_default_82571 - Verify a valid default LED config + * @hw: pointer to the HW structure + * @data: pointer to the NVM (EEPROM) + * + * Read the EEPROM for the current default LED configuration. If the + * LED configuration is not valid, set to a valid LED configuration. + **/ +static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) +{ + s32 ret_val; + + ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + if (hw->mac.type == e1000_82573 && + *data == ID_LED_RESERVED_F746) + *data = ID_LED_DEFAULT_82573; + else if (*data == ID_LED_RESERVED_0000 || + *data == ID_LED_RESERVED_FFFF) + *data = ID_LED_DEFAULT; + + return 0; +} + +/** + * e1000e_get_laa_state_82571 - Get locally administered address state + * @hw: pointer to the HW structure + * + * Retrieve and return the current locally administed address state. + **/ +bool e1000e_get_laa_state_82571(struct e1000_hw *hw) +{ + if (hw->mac.type != e1000_82571) + return 0; + + return hw->dev_spec.e82571.laa_is_present; +} + +/** + * e1000e_set_laa_state_82571 - Set locally administered address state + * @hw: pointer to the HW structure + * @state: enable/disable locally administered address + * + * Enable/Disable the current locally administed address state. + **/ +void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) +{ + if (hw->mac.type != e1000_82571) + return; + + hw->dev_spec.e82571.laa_is_present = state; + + /* If workaround is activated... */ + if (state) + /* Hold a copy of the LAA in RAR[14] This is done so that + * between the time RAR[0] gets clobbered and the time it + * gets fixed, the actual LAA is in one of the RARs and no + * incoming packets directed to this port are dropped. + * Eventually the LAA will be in RAR[0] and RAR[14]. + */ + e1000e_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1); +} + +/** + * e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum + * @hw: pointer to the HW structure + * + * Verifies that the EEPROM has completed the update. After updating the + * EEPROM, we need to check bit 15 in work 0x23 for the checksum fix. If + * the checksum fix is not implemented, we need to set the bit and update + * the checksum. Otherwise, if bit 15 is set and the checksum is incorrect, + * we need to return bad checksum. + **/ +static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) +{ + struct e1000_nvm_info *nvm = &hw->nvm; + s32 ret_val; + u16 data; + + if (nvm->type != e1000_nvm_flash_hw) + return 0; + + /* Check bit 4 of word 10h. If it is 0, firmware is done updating + * 10h-12h. Checksum may need to be fixed. + */ + ret_val = e1000_read_nvm(hw, 0x10, 1, &data); + if (ret_val) + return ret_val; + + if (!(data & 0x10)) { + /* Read 0x23 and check bit 15. This bit is a 1 + * when the checksum has already been fixed. If + * the checksum is still wrong and this bit is a + * 1, we need to return bad checksum. Otherwise, + * we need to set this bit to a 1 and update the + * checksum. + */ + ret_val = e1000_read_nvm(hw, 0x23, 1, &data); + if (ret_val) + return ret_val; + + if (!(data & 0x8000)) { + data |= 0x8000; + ret_val = e1000_write_nvm(hw, 0x23, 1, &data); + if (ret_val) + return ret_val; + ret_val = e1000e_update_nvm_checksum(hw); + } + } + + return 0; +} + +/** + * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters + * @hw: pointer to the HW structure + * + * Clears the hardware counters by reading the counter registers. + **/ +static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw) +{ + u32 temp; + + e1000e_clear_hw_cntrs_base(hw); + + temp = er32(PRC64); + temp = er32(PRC127); + temp = er32(PRC255); + temp = er32(PRC511); + temp = er32(PRC1023); + temp = er32(PRC1522); + temp = er32(PTC64); + temp = er32(PTC127); + temp = er32(PTC255); + temp = er32(PTC511); + temp = er32(PTC1023); + temp = er32(PTC1522); + + temp = er32(ALGNERRC); + temp = er32(RXERRC); + temp = er32(TNCRS); + temp = er32(CEXTERR); + temp = er32(TSCTC); + temp = er32(TSCTFC); + + temp = er32(MGTPRC); + temp = er32(MGTPDC); + temp = er32(MGTPTC); + + temp = er32(IAC); + temp = er32(ICRXOC); + + temp = er32(ICRXPTC); + temp = er32(ICRXATC); + temp = er32(ICTXPTC); + temp = er32(ICTXATC); + temp = er32(ICTXQEC); + temp = er32(ICTXQMTC); + temp = er32(ICRXDMTC); +} + +static struct e1000_mac_operations e82571_mac_ops = { + .mng_mode_enab = E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT, + /* .check_for_link: media type dependent */ + .cleanup_led = e1000e_cleanup_led_generic, + .clear_hw_cntrs = e1000_clear_hw_cntrs_82571, + .get_bus_info = e1000e_get_bus_info_pcie, + /* .get_link_up_info: media type dependent */ + .led_on = e1000e_led_on_generic, + .led_off = e1000e_led_off_generic, + .mc_addr_list_update = e1000_mc_addr_list_update_82571, + .reset_hw = e1000_reset_hw_82571, + .init_hw = e1000_init_hw_82571, + .setup_link = e1000_setup_link_82571, + /* .setup_physical_interface: media type dependent */ +}; + +static struct e1000_phy_operations e82_phy_ops_igp = { + .acquire_phy = e1000_get_hw_semaphore_82571, + .check_reset_block = e1000e_check_reset_block_generic, + .commit_phy = NULL, + .force_speed_duplex = e1000e_phy_force_speed_duplex_igp, + .get_cfg_done = e1000_get_cfg_done_82571, + .get_cable_length = e1000e_get_cable_length_igp_2, + .get_phy_info = e1000e_get_phy_info_igp, + .read_phy_reg = e1000e_read_phy_reg_igp, + .release_phy = e1000_put_hw_semaphore_82571, + .reset_phy = e1000e_phy_hw_reset_generic, + .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, + .set_d3_lplu_state = e1000e_set_d3_lplu_state, + .write_phy_reg = e1000e_write_phy_reg_igp, +}; + +static struct e1000_phy_operations e82_phy_ops_m88 = { + .acquire_phy = e1000_get_hw_semaphore_82571, + .check_reset_block = e1000e_check_reset_block_generic, + .commit_phy = e1000e_phy_sw_reset, + .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, + .get_cfg_done = e1000e_get_cfg_done, + .get_cable_length = e1000e_get_cable_length_m88, + .get_phy_info = e1000e_get_phy_info_m88, + .read_phy_reg = e1000e_read_phy_reg_m88, + .release_phy = e1000_put_hw_semaphore_82571, + .reset_phy = e1000e_phy_hw_reset_generic, + .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, + .set_d3_lplu_state = e1000e_set_d3_lplu_state, + .write_phy_reg = e1000e_write_phy_reg_m88, +}; + +static struct e1000_nvm_operations e82571_nvm_ops = { + .acquire_nvm = e1000_acquire_nvm_82571, + .read_nvm = e1000e_read_nvm_spi, + .release_nvm = e1000_release_nvm_82571, + .update_nvm = e1000_update_nvm_checksum_82571, + .valid_led_default = e1000_valid_led_default_82571, + .validate_nvm = e1000_validate_nvm_checksum_82571, + .write_nvm = e1000_write_nvm_82571, +}; + +static struct e1000_nvm_operations e82573_nvm_ops = { + .acquire_nvm = e1000_acquire_nvm_82571, + .read_nvm = e1000e_read_nvm_eerd, + .release_nvm = e1000_release_nvm_82571, + .update_nvm = e1000_update_nvm_checksum_82571, + .valid_led_default = e1000_valid_led_default_82571, + .validate_nvm = e1000_validate_nvm_checksum_82571, + .write_nvm = e1000_write_nvm_82571, +}; + +struct e1000_info e1000_82571_info = { + .mac = e1000_82571, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_JUMBO_FRAMES + | FLAG_HAS_STATS_PTC_PRC + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_RX_CSUM_ENABLED + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_STATS_ICR_ICT + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_RESET_OVERWRITES_LAA /* errata */ + | FLAG_TARC_SPEED_MODE_BIT /* errata */ + | FLAG_APME_CHECK_PORT_B, + .pba = 38, + .get_invariants = e1000_get_invariants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_igp, + .nvm_ops = &e82571_nvm_ops, +}; + +struct e1000_info e1000_82572_info = { + .mac = e1000_82572, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_JUMBO_FRAMES + | FLAG_HAS_STATS_PTC_PRC + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_RX_CSUM_ENABLED + | FLAG_HAS_CTRLEXT_ON_LOAD + | FLAG_HAS_STATS_ICR_ICT + | FLAG_TARC_SPEED_MODE_BIT, /* errata */ + .pba = 38, + .get_invariants = e1000_get_invariants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_igp, + .nvm_ops = &e82571_nvm_ops, +}; + +struct e1000_info e1000_82573_info = { + .mac = e1000_82573, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_JUMBO_FRAMES + | FLAG_HAS_STATS_PTC_PRC + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_RX_CSUM_ENABLED + | FLAG_HAS_STATS_ICR_ICT + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_HAS_AMT + | FLAG_HAS_ASPM + | FLAG_HAS_ERT + | FLAG_HAS_SWSM_ON_LOAD, + .pba = 20, + .get_invariants = e1000_get_invariants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_m88, + .nvm_ops = &e82573_nvm_ops, +}; + |