summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e/ethtool.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e/ethtool.c')
-rw-r--r--drivers/net/e1000e/ethtool.c282
1 files changed, 157 insertions, 125 deletions
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index f77a7427d3a..6d1b257bbda 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1,7 +1,7 @@
/*******************************************************************************
Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2007 Intel Corporation.
+ Copyright(c) 1999 - 2008 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
@@ -102,7 +102,7 @@ static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
"Interrupt test (offline)", "Loopback test (offline)",
"Link test (on/offline)"
};
-#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
static int e1000_get_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
@@ -111,7 +111,7 @@ static int e1000_get_settings(struct net_device *netdev,
struct e1000_hw *hw = &adapter->hw;
u32 status;
- if (hw->media_type == e1000_media_type_copper) {
+ if (hw->phy.media_type == e1000_media_type_copper) {
ecmd->supported = (SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
@@ -165,7 +165,7 @@ static int e1000_get_settings(struct net_device *netdev,
ecmd->duplex = -1;
}
- ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+ ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
return 0;
}
@@ -187,7 +187,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx)
mac->autoneg = 0;
/* Fiber NICs only allow 1000 gbps Full duplex */
- if ((adapter->hw.media_type == e1000_media_type_fiber) &&
+ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
spddplx != (SPEED_1000 + DUPLEX_FULL)) {
ndev_err(adapter->netdev, "Unsupported Speed/Duplex "
"configuration\n");
@@ -226,8 +226,10 @@ static int e1000_set_settings(struct net_device *netdev,
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- /* When SoL/IDER sessions are active, autoneg/speed/duplex
- * cannot be changed */
+ /*
+ * When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed
+ */
if (e1000_check_reset_block(hw)) {
ndev_err(netdev, "Cannot change link "
"characteristics when SoL/IDER is active.\n");
@@ -239,7 +241,7 @@ static int e1000_set_settings(struct net_device *netdev,
if (ecmd->autoneg == AUTONEG_ENABLE) {
hw->mac.autoneg = 1;
- if (hw->media_type == e1000_media_type_fiber)
+ if (hw->phy.media_type == e1000_media_type_fiber)
hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
ADVERTISED_FIBRE |
ADVERTISED_Autoneg;
@@ -248,6 +250,8 @@ static int e1000_set_settings(struct net_device *netdev,
ADVERTISED_TP |
ADVERTISED_Autoneg;
ecmd->advertising = hw->phy.autoneg_advertised;
+ if (adapter->fc_autoneg)
+ hw->fc.original_type = e1000_fc_default;
} else {
if (e1000_set_spd_dplx(adapter, ecmd->speed + ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->state);
@@ -277,11 +281,11 @@ static void e1000_get_pauseparam(struct net_device *netdev,
pause->autoneg =
(adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
- if (hw->mac.fc == e1000_fc_rx_pause) {
+ if (hw->fc.type == e1000_fc_rx_pause) {
pause->rx_pause = 1;
- } else if (hw->mac.fc == e1000_fc_tx_pause) {
+ } else if (hw->fc.type == e1000_fc_tx_pause) {
pause->tx_pause = 1;
- } else if (hw->mac.fc == e1000_fc_full) {
+ } else if (hw->fc.type == e1000_fc_full) {
pause->rx_pause = 1;
pause->tx_pause = 1;
}
@@ -300,18 +304,18 @@ static int e1000_set_pauseparam(struct net_device *netdev,
msleep(1);
if (pause->rx_pause && pause->tx_pause)
- hw->mac.fc = e1000_fc_full;
+ hw->fc.type = e1000_fc_full;
else if (pause->rx_pause && !pause->tx_pause)
- hw->mac.fc = e1000_fc_rx_pause;
+ hw->fc.type = e1000_fc_rx_pause;
else if (!pause->rx_pause && pause->tx_pause)
- hw->mac.fc = e1000_fc_tx_pause;
+ hw->fc.type = e1000_fc_tx_pause;
else if (!pause->rx_pause && !pause->tx_pause)
- hw->mac.fc = e1000_fc_none;
+ hw->fc.type = e1000_fc_none;
- hw->mac.original_fc = hw->mac.fc;
+ hw->fc.original_type = hw->fc.type;
if (adapter->fc_autoneg == AUTONEG_ENABLE) {
- hw->mac.fc = e1000_fc_default;
+ hw->fc.type = e1000_fc_default;
if (netif_running(adapter->netdev)) {
e1000e_down(adapter);
e1000e_up(adapter);
@@ -319,7 +323,7 @@ static int e1000_set_pauseparam(struct net_device *netdev,
e1000e_reset(adapter);
}
} else {
- retval = ((hw->media_type == e1000_media_type_fiber) ?
+ retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
}
@@ -558,8 +562,10 @@ static int e1000_set_eeprom(struct net_device *netdev,
ret_val = e1000_write_nvm(hw, first_word,
last_word - first_word + 1, eeprom_buff);
- /* Update the checksum over the first part of the EEPROM if needed
- * and flush shadow RAM for 82573 controllers */
+ /*
+ * Update the checksum over the first part of the EEPROM if needed
+ * and flush shadow RAM for 82573 controllers
+ */
if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG) ||
(hw->mac.type == e1000_82573)))
e1000e_update_nvm_checksum(hw);
@@ -578,8 +584,10 @@ static void e1000_get_drvinfo(struct net_device *netdev,
strncpy(drvinfo->driver, e1000e_driver_name, 32);
strncpy(drvinfo->version, e1000e_driver_version, 32);
- /* EEPROM image version # is reported as firmware version # for
- * PCI-E controllers */
+ /*
+ * EEPROM image version # is reported as firmware version # for
+ * PCI-E controllers
+ */
e1000_read_nvm(&adapter->hw, 5, 1, &eeprom_data);
sprintf(firmware_version, "%d.%d-%d",
(eeprom_data & 0xF000) >> 12,
@@ -633,10 +641,17 @@ static int e1000_set_ringparam(struct net_device *netdev,
tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
if (!tx_ring)
goto err_alloc_tx;
+ /*
+ * use a memcpy to save any previously configured
+ * items like napi structs from having to be
+ * reinitialized
+ */
+ memcpy(tx_ring, tx_old, sizeof(struct e1000_ring));
rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
if (!rx_ring)
goto err_alloc_rx;
+ memcpy(rx_ring, rx_old, sizeof(struct e1000_ring));
adapter->tx_ring = tx_ring;
adapter->rx_ring = rx_ring;
@@ -658,8 +673,10 @@ static int e1000_set_ringparam(struct net_device *netdev,
if (err)
goto err_setup_tx;
- /* save the new, restore the old in order to free it,
- * then restore the new back again */
+ /*
+ * restore the old in order to free it,
+ * then add in the new
+ */
adapter->rx_ring = rx_old;
adapter->tx_ring = tx_old;
e1000e_free_rx_resources(adapter);
@@ -690,61 +707,55 @@ err_setup:
return err;
}
-static bool reg_pattern_test_array(struct e1000_adapter *adapter, u64 *data,
- int reg, int offset, u32 mask, u32 write)
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
+ int reg, int offset, u32 mask, u32 write)
{
- int i;
- u32 read;
+ u32 pat, val;
static const u32 test[] =
{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
- for (i = 0; i < ARRAY_SIZE(test); i++) {
+ for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
- (test[i] & write));
- read = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
- if (read != (test[i] & write & mask)) {
+ (test[pat] & write));
+ val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
+ if (val != (test[pat] & write & mask)) {
ndev_err(adapter->netdev, "pattern test reg %04X "
"failed: got 0x%08X expected 0x%08X\n",
reg + offset,
- read, (test[i] & write & mask));
+ val, (test[pat] & write & mask));
*data = reg;
- return true;
+ return 1;
}
}
- return false;
+ return 0;
}
static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
int reg, u32 mask, u32 write)
{
- u32 read;
+ u32 val;
__ew32(&adapter->hw, reg, write & mask);
- read = __er32(&adapter->hw, reg);
- if ((write & mask) != (read & mask)) {
+ val = __er32(&adapter->hw, reg);
+ if ((write & mask) != (val & mask)) {
ndev_err(adapter->netdev, "set/check reg %04X test failed: "
- "got 0x%08X expected 0x%08X\n", reg, (read & mask),
+ "got 0x%08X expected 0x%08X\n", reg, (val & mask),
(write & mask));
*data = reg;
- return true;
+ return 1;
}
- return false;
+ return 0;
}
-
-#define REG_PATTERN_TEST(R, M, W) \
- do { \
- if (reg_pattern_test_array(adapter, data, R, 0, M, W)) \
- return 1; \
+#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
+ return 1; \
} while (0)
+#define REG_PATTERN_TEST(reg, mask, write) \
+ REG_PATTERN_TEST_ARRAY(reg, 0, mask, write)
-#define REG_PATTERN_TEST_ARRAY(R, offset, M, W) \
- do { \
- if (reg_pattern_test_array(adapter, data, R, offset, M, W)) \
- return 1; \
- } while (0)
-
-#define REG_SET_AND_CHECK(R, M, W) \
- do { \
- if (reg_set_and_check(adapter, data, R, M, W)) \
- return 1; \
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
} while (0)
static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
@@ -758,7 +769,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
u32 i;
u32 toggle;
- /* The status register is Read Only, so a write should fail.
+ /*
+ * The status register is Read Only, so a write should fail.
* Some bits that get toggled are ignored.
*/
switch (mac->type) {
@@ -908,7 +920,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
mask = 1 << i;
if (!shared_int) {
- /* Disable the interrupt to be reported in
+ /*
+ * Disable the interrupt to be reported in
* the cause register and then force the same
* interrupt and see if one gets posted. If
* an interrupt was posted to the bus, the
@@ -925,7 +938,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
}
}
- /* Enable the interrupt to be reported in
+ /*
+ * Enable the interrupt to be reported in
* the cause register and then force the same
* interrupt and see if one gets posted. If
* an interrupt was not posted to the bus, the
@@ -942,7 +956,8 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
}
if (!shared_int) {
- /* Disable the other interrupts to be reported in
+ /*
+ * Disable the other interrupts to be reported in
* the cause register and then force the other
* interrupts and see if any get posted. If
* an interrupt was posted to the bus, the
@@ -1024,7 +1039,6 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
struct pci_dev *pdev = adapter->pdev;
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
- int size;
int i;
int ret_val;
@@ -1033,13 +1047,13 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
if (!tx_ring->count)
tx_ring->count = E1000_DEFAULT_TXD;
- size = tx_ring->count * sizeof(struct e1000_buffer);
- tx_ring->buffer_info = kmalloc(size, GFP_KERNEL);
- if (!tx_ring->buffer_info) {
+ tx_ring->buffer_info = kcalloc(tx_ring->count,
+ sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!(tx_ring->buffer_info)) {
ret_val = 1;
goto err_nomem;
}
- memset(tx_ring->buffer_info, 0, size);
tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
tx_ring->size = ALIGN(tx_ring->size, 4096);
@@ -1049,21 +1063,17 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ret_val = 2;
goto err_nomem;
}
- memset(tx_ring->desc, 0, tx_ring->size);
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
- ew32(TDBAL,
- ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAL, ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
ew32(TDBAH, ((u64) tx_ring->dma >> 32));
- ew32(TDLEN,
- tx_ring->count * sizeof(struct e1000_tx_desc));
+ ew32(TDLEN, tx_ring->count * sizeof(struct e1000_tx_desc));
ew32(TDH, 0);
ew32(TDT, 0);
- ew32(TCTL,
- E1000_TCTL_PSP | E1000_TCTL_EN |
- E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
- E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
for (i = 0; i < tx_ring->count; i++) {
struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
@@ -1085,12 +1095,11 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ret_val = 4;
goto err_nomem;
}
- tx_desc->buffer_addr = cpu_to_le64(
- tx_ring->buffer_info[i].dma);
+ tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
tx_desc->lower.data = cpu_to_le32(skb->len);
tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
E1000_TXD_CMD_IFCS |
- E1000_TXD_CMD_RPS);
+ E1000_TXD_CMD_RS);
tx_desc->upper.data = 0;
}
@@ -1099,13 +1108,13 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
if (!rx_ring->count)
rx_ring->count = E1000_DEFAULT_RXD;
- size = rx_ring->count * sizeof(struct e1000_buffer);
- rx_ring->buffer_info = kmalloc(size, GFP_KERNEL);
- if (!rx_ring->buffer_info) {
+ rx_ring->buffer_info = kcalloc(rx_ring->count,
+ sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!(rx_ring->buffer_info)) {
ret_val = 5;
goto err_nomem;
}
- memset(rx_ring->buffer_info, 0, size);
rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
@@ -1114,7 +1123,6 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ret_val = 6;
goto err_nomem;
}
- memset(rx_ring->desc, 0, rx_ring->size);
rx_ring->next_to_use = 0;
rx_ring->next_to_clean = 0;
@@ -1126,6 +1134,8 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ew32(RDH, 0);
ew32(RDT, 0);
rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
+ E1000_RCTL_SBP | E1000_RCTL_SECRC |
E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
(adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
ew32(RCTL, rctl);
@@ -1175,21 +1185,22 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
u32 ctrl_reg = 0;
u32 stat_reg = 0;
- adapter->hw.mac.autoneg = 0;
+ hw->mac.autoneg = 0;
- if (adapter->hw.phy.type == e1000_phy_m88) {
+ if (hw->phy.type == e1000_phy_m88) {
/* Auto-MDI/MDIX Off */
e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
/* reset to update Auto-MDI/MDIX */
e1e_wphy(hw, PHY_CONTROL, 0x9140);
/* autoneg off */
e1e_wphy(hw, PHY_CONTROL, 0x8140);
- } else if (adapter->hw.phy.type == e1000_phy_gg82563)
+ } else if (hw->phy.type == e1000_phy_gg82563)
e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
ctrl_reg = er32(CTRL);
- if (adapter->hw.phy.type == e1000_phy_ife) {
+ switch (hw->phy.type) {
+ case e1000_phy_ife:
/* force 100, set loopback */
e1e_wphy(hw, PHY_CONTROL, 0x6100);
@@ -1199,9 +1210,11 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
E1000_CTRL_SPD_100 |/* Force Speed to 100 */
E1000_CTRL_FD); /* Force Duplex to FULL */
- } else {
+ break;
+ default:
/* force 1000, set loopback */
e1e_wphy(hw, PHY_CONTROL, 0x4140);
+ mdelay(250);
/* Now set up the MAC to the same speed/duplex as the PHY. */
ctrl_reg = er32(CTRL);
@@ -1210,14 +1223,20 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ if ((adapter->hw.mac.type == e1000_ich8lan) ||
+ (adapter->hw.mac.type == e1000_ich9lan))
+ ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */
}
- if (adapter->hw.media_type == e1000_media_type_copper &&
- adapter->hw.phy.type == e1000_phy_m88) {
+ if (hw->phy.media_type == e1000_media_type_copper &&
+ hw->phy.type == e1000_phy_m88) {
ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
} else {
- /* Set the ILOS bit on the fiber Nic if half duplex link is
- * detected. */
+ /*
+ * Set the ILOS bit on the fiber Nic if half duplex link is
+ * detected.
+ */
stat_reg = er32(STATUS);
if ((stat_reg & E1000_STATUS_FD) == 0)
ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
@@ -1225,10 +1244,11 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
ew32(CTRL, ctrl_reg);
- /* Disable the receiver on the PHY so when a cable is plugged in, the
+ /*
+ * Disable the receiver on the PHY so when a cable is plugged in, the
* PHY does not begin to autoneg when a cable is reconnected to the NIC.
*/
- if (adapter->hw.phy.type == e1000_phy_m88)
+ if (hw->phy.type == e1000_phy_m88)
e1000_phy_disable_receiver(adapter);
udelay(500);
@@ -1244,8 +1264,10 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
/* special requirements for 82571/82572 fiber adapters */
- /* jump through hoops to make sure link is up because serdes
- * link is hardwired up */
+ /*
+ * jump through hoops to make sure link is up because serdes
+ * link is hardwired up
+ */
ctrl |= E1000_CTRL_SLU;
ew32(CTRL, ctrl);
@@ -1263,8 +1285,10 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
ew32(CTRL, ctrl);
}
- /* special write to serdes control register to enable SerDes analog
- * loopback */
+ /*
+ * special write to serdes control register to enable SerDes analog
+ * loopback
+ */
#define E1000_SERDES_LB_ON 0x410
ew32(SCTL, E1000_SERDES_LB_ON);
msleep(10);
@@ -1279,8 +1303,10 @@ static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
u32 ctrlext = er32(CTRL_EXT);
u32 ctrl = er32(CTRL);
- /* save CTRL_EXT to restore later, reuse an empty variable (unused
- on mac_type 80003es2lan) */
+ /*
+ * save CTRL_EXT to restore later, reuse an empty variable (unused
+ * on mac_type 80003es2lan)
+ */
adapter->tx_fifo_head = ctrlext;
/* clear the serdes mode bits, putting the device into mac loopback */
@@ -1302,7 +1328,7 @@ static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
#define KMRNCTRLSTA_OPMODE (0x1F << 16)
#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
ew32(KMRNCTRLSTA,
- (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
+ (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
return 0;
}
@@ -1312,8 +1338,8 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
switch (hw->mac.type) {
case e1000_80003es2lan:
return e1000_set_es2lan_mac_loopback(adapter);
@@ -1328,7 +1354,7 @@ static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
ew32(RCTL, rctl);
return 0;
}
- } else if (hw->media_type == e1000_media_type_copper) {
+ } else if (hw->phy.media_type == e1000_media_type_copper) {
return e1000_integrated_phy_loopback(adapter);
}
@@ -1347,18 +1373,17 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
switch (hw->mac.type) {
case e1000_80003es2lan:
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
/* restore CTRL_EXT, stealing space from tx_fifo_head */
- ew32(CTRL_EXT,
- adapter->tx_fifo_head);
+ ew32(CTRL_EXT, adapter->tx_fifo_head);
adapter->tx_fifo_head = 0;
}
/* fall through */
case e1000_82571:
case e1000_82572:
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
#define E1000_SERDES_LB_OFF 0x400
ew32(SCTL, E1000_SERDES_LB_OFF);
msleep(10);
@@ -1414,7 +1439,8 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
ew32(RDT, rx_ring->count - 1);
- /* Calculate the loop count based on the largest descriptor ring
+ /*
+ * Calculate the loop count based on the largest descriptor ring
* The idea is to wrap the largest ring a number of times using 64
* send/receive pairs during each loop
*/
@@ -1428,8 +1454,8 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
l = 0;
for (j = 0; j <= lc; j++) { /* loop count loop */
for (i = 0; i < 64; i++) { /* send the packets */
- e1000_create_lbtest_frame(
- tx_ring->buffer_info[i].skb, 1024);
+ e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
+ 1024);
pci_dma_sync_single_for_device(pdev,
tx_ring->buffer_info[k].dma,
tx_ring->buffer_info[k].length,
@@ -1454,7 +1480,8 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
l++;
if (l == rx_ring->count)
l = 0;
- /* time + 20 msecs (200 msecs on 2.4) is more than
+ /*
+ * time + 20 msecs (200 msecs on 2.4) is more than
* enough time to complete the receives, if it's
* exceeded, break and error off
*/
@@ -1463,7 +1490,7 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
ret_val = 13; /* ret_val is the same as mis-compare */
break;
}
- if (jiffies >= (time + 2)) {
+ if (jiffies >= (time + 20)) {
ret_val = 14; /* error code for time out error */
break;
}
@@ -1473,8 +1500,10 @@ static int e1000_run_loopback_test(struct e1000_adapter *adapter)
static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
{
- /* PHY loopback cannot be performed if SoL/IDER
- * sessions are active */
+ /*
+ * PHY loopback cannot be performed if SoL/IDER
+ * sessions are active
+ */
if (e1000_check_reset_block(&adapter->hw)) {
ndev_err(adapter->netdev, "Cannot do PHY loopback test "
"when SoL/IDER is active.\n");
@@ -1504,12 +1533,14 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
struct e1000_hw *hw = &adapter->hw;
*data = 0;
- if (hw->media_type == e1000_media_type_internal_serdes) {
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
int i = 0;
hw->mac.serdes_has_link = 0;
- /* On some blade server designs, link establishment
- * could take as long as 2-3 minutes */
+ /*
+ * On some blade server designs, link establishment
+ * could take as long as 2-3 minutes
+ */
do {
hw->mac.ops.check_for_link(hw);
if (hw->mac.serdes_has_link)
@@ -1562,8 +1593,10 @@ static void e1000_diag_test(struct net_device *netdev,
ndev_info(netdev, "offline testing starting\n");
- /* Link test performed before hardware reset so autoneg doesn't
- * interfere with test result */
+ /*
+ * Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result
+ */
if (e1000_link_test(adapter, &data[4]))
eth_test->flags |= ETH_TEST_FL_FAILED;
@@ -1596,9 +1629,9 @@ static void e1000_diag_test(struct net_device *netdev,
adapter->hw.mac.autoneg = autoneg;
/* force this routine to wait until autoneg complete/timeout */
- adapter->hw.phy.wait_for_link = 1;
+ adapter->hw.phy.autoneg_wait_to_complete = 1;
e1000e_reset(adapter);
- adapter->hw.phy.wait_for_link = 0;
+ adapter->hw.phy.autoneg_wait_to_complete = 0;
clear_bit(__E1000_TESTING, &adapter->state);
if (if_running)
@@ -1768,8 +1801,7 @@ static void e1000_get_strings(struct net_device *netdev, u32 stringset,
switch (stringset) {
case ETH_SS_TEST:
- memcpy(data, *e1000_gstrings_test,
- sizeof(e1000_gstrings_test));
+ memcpy(data, *e1000_gstrings_test, sizeof(e1000_gstrings_test));
break;
case ETH_SS_STATS:
for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-18 21:00:52 +0000