diff options
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 804 |
1 files changed, 500 insertions, 304 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index fc5c63f4f57..8991ab8911e 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2007 Intel Corporation. + Copyright(c) 1999 - 2008 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -46,7 +46,7 @@ #include "e1000.h" -#define DRV_VERSION "0.2.0" +#define DRV_VERSION "0.2.1" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -82,7 +82,7 @@ static int e1000_desc_unused(struct e1000_ring *ring) } /** - * e1000_receive_skb - helper function to handle rx indications + * e1000_receive_skb - helper function to handle Rx indications * @adapter: board private structure * @status: descriptor status field as written by hardware * @vlan: descriptor vlan field as written by hardware (no le/be conversion) @@ -138,8 +138,9 @@ static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err, /* TCP checksum is good */ skb->ip_summed = CHECKSUM_UNNECESSARY; } else { - /* IP fragment with UDP payload */ - /* Hardware complements the payload checksum, so we undo it + /* + * IP fragment with UDP payload + * Hardware complements the payload checksum, so we undo it * and then put the value in host order for further stack use. */ __sum16 sum = (__force __sum16)htons(csum); @@ -182,7 +183,8 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, break; } - /* Make buffer alignment 2 beyond a 16 byte boundary + /* + * Make buffer alignment 2 beyond a 16 byte boundary * this will result in a 16 byte aligned IP header after * the 14 byte MAC header is removed */ @@ -213,10 +215,12 @@ map_skb: if (i-- == 0) i = (rx_ring->count - 1); - /* Force memory writes to complete before letting h/w + /* + * Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); writel(i, adapter->hw.hw_addr + rx_ring->tail); } @@ -285,7 +289,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, break; } - /* Make buffer alignment 2 beyond a 16 byte boundary + /* + * Make buffer alignment 2 beyond a 16 byte boundary * this will result in a 16 byte aligned IP header after * the 14 byte MAC header is removed */ @@ -319,12 +324,15 @@ no_buffers: if (!(i--)) i = (rx_ring->count - 1); - /* Force memory writes to complete before letting h/w + /* + * Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); - /* Hardware increments by 16 bytes, but packet split + /* + * Hardware increments by 16 bytes, but packet split * descriptors are 32 bytes...so we increment tail * twice as much. */ @@ -409,9 +417,11 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, total_rx_bytes += length; total_rx_packets++; - /* code added for copybreak, this should improve + /* + * code added for copybreak, this should improve * performance for small packets with large amounts - * of reassembly being done in the stack */ + * of reassembly being done in the stack + */ if (length < copybreak) { struct sk_buff *new_skb = netdev_alloc_skb(netdev, length + NET_IP_ALIGN); @@ -456,10 +466,10 @@ next_desc: if (cleaned_count) adapter->alloc_rx_buf(adapter, cleaned_count); - adapter->total_rx_packets += total_rx_packets; adapter->total_rx_bytes += total_rx_bytes; - adapter->net_stats.rx_packets += total_rx_packets; + adapter->total_rx_packets += total_rx_packets; adapter->net_stats.rx_bytes += total_rx_bytes; + adapter->net_stats.rx_packets += total_rx_packets; return cleaned; } @@ -581,22 +591,23 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) } if (adapter->detect_tx_hung) { - /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ + /* + * Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i + */ adapter->detect_tx_hung = 0; if (tx_ring->buffer_info[eop].dma && time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + (adapter->tx_timeout_factor * HZ)) - && !(er32(STATUS) & - E1000_STATUS_TXOFF)) { + && !(er32(STATUS) & E1000_STATUS_TXOFF)) { e1000_print_tx_hang(adapter); netif_stop_queue(netdev); } } adapter->total_tx_bytes += total_tx_bytes; adapter->total_tx_packets += total_tx_packets; - adapter->net_stats.tx_packets += total_tx_packets; adapter->net_stats.tx_bytes += total_tx_bytes; + adapter->net_stats.tx_packets += total_tx_packets; return cleaned; } @@ -677,21 +688,28 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb_put(skb, length); { - /* this looks ugly, but it seems compiler issues make it - more efficient than reusing j */ + /* + * this looks ugly, but it seems compiler issues make it + * more efficient than reusing j + */ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]); - /* page alloc/put takes too long and effects small packet - * throughput, so unsplit small packets and save the alloc/put*/ + /* + * page alloc/put takes too long and effects small packet + * throughput, so unsplit small packets and save the alloc/put + * only valid in softirq (napi) context to call kmap_* + */ if (l1 && (l1 <= copybreak) && ((length + l1) <= adapter->rx_ps_bsize0)) { u8 *vaddr; ps_page = &buffer_info->ps_pages[0]; - /* there is no documentation about how to call + /* + * there is no documentation about how to call * kmap_atomic, so we can't hold the mapping - * very long */ + * very long + */ pci_dma_sync_single_for_cpu(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ); @@ -757,10 +775,10 @@ next_desc: if (cleaned_count) adapter->alloc_rx_buf(adapter, cleaned_count); - adapter->total_rx_packets += total_rx_packets; adapter->total_rx_bytes += total_rx_bytes; - adapter->net_stats.rx_packets += total_rx_packets; + adapter->total_rx_packets += total_rx_packets; adapter->net_stats.rx_bytes += total_rx_bytes; + adapter->net_stats.rx_packets += total_rx_packets; return cleaned; } @@ -836,26 +854,31 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); - /* read ICR disables interrupts using IAM, so keep up with our - * enable/disable accounting */ - atomic_inc(&adapter->irq_sem); + /* + * read ICR disables interrupts using IAM + */ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { hw->mac.get_link_status = 1; - /* ICH8 workaround-- Call gig speed drop workaround on cable - * disconnect (LSC) before accessing any PHY registers */ + /* + * ICH8 workaround-- Call gig speed drop workaround on cable + * disconnect (LSC) before accessing any PHY registers + */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) e1000e_gig_downshift_workaround_ich8lan(hw); - /* 80003ES2LAN workaround-- For packet buffer work-around on + /* + * 80003ES2LAN workaround-- For packet buffer work-around on * link down event; disable receives here in the ISR and reset - * adapter in watchdog */ + * adapter in watchdog + */ if (netif_carrier_ok(netdev) && adapter->flags & FLAG_RX_NEEDS_RESTART) { /* disable receives */ u32 rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); + adapter->flags |= FLAG_RX_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -868,8 +891,6 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; __netif_rx_schedule(netdev, &adapter->napi); - } else { - atomic_dec(&adapter->irq_sem); } return IRQ_HANDLED; @@ -890,26 +911,31 @@ static irqreturn_t e1000_intr(int irq, void *data) if (!icr) return IRQ_NONE; /* Not our interrupt */ - /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is - * not set, then the adapter didn't send an interrupt */ + /* + * IMS will not auto-mask if INT_ASSERTED is not set, and if it is + * not set, then the adapter didn't send an interrupt + */ if (!(icr & E1000_ICR_INT_ASSERTED)) return IRQ_NONE; - /* Interrupt Auto-Mask...upon reading ICR, + /* + * Interrupt Auto-Mask...upon reading ICR, * interrupts are masked. No need for the - * IMC write, but it does mean we should - * account for it ASAP. */ - atomic_inc(&adapter->irq_sem); + * IMC write + */ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { hw->mac.get_link_status = 1; - /* ICH8 workaround-- Call gig speed drop workaround on cable - * disconnect (LSC) before accessing any PHY registers */ + /* + * ICH8 workaround-- Call gig speed drop workaround on cable + * disconnect (LSC) before accessing any PHY registers + */ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) && (!(er32(STATUS) & E1000_STATUS_LU))) e1000e_gig_downshift_workaround_ich8lan(hw); - /* 80003ES2LAN workaround-- + /* + * 80003ES2LAN workaround-- * For packet buffer work-around on link down event; * disable receives here in the ISR and * reset adapter in watchdog @@ -919,6 +945,7 @@ static irqreturn_t e1000_intr(int irq, void *data) /* disable receives */ rctl = er32(RCTL); ew32(RCTL, rctl & ~E1000_RCTL_EN); + adapter->flags |= FLAG_RX_RESTART_NOW; } /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -931,8 +958,6 @@ static irqreturn_t e1000_intr(int irq, void *data) adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; __netif_rx_schedule(netdev, &adapter->napi); - } else { - atomic_dec(&adapter->irq_sem); } return IRQ_HANDLED; @@ -983,7 +1008,6 @@ static void e1000_irq_disable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - atomic_inc(&adapter->irq_sem); ew32(IMC, ~0); e1e_flush(); synchronize_irq(adapter->pdev->irq); @@ -996,10 +1020,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - if (atomic_dec_and_test(&adapter->irq_sem)) { - ew32(IMS, IMS_ENABLE_MASK); - e1e_flush(); - } + ew32(IMS, IMS_ENABLE_MASK); + e1e_flush(); } /** @@ -1023,8 +1045,7 @@ static void e1000_get_hw_control(struct e1000_adapter *adapter) ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD); } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { ctrl_ext = er32(CTRL_EXT); - ew32(CTRL_EXT, - ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); + ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD); } } @@ -1050,8 +1071,7 @@ static void e1000_release_hw_control(struct e1000_adapter *adapter) ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD); } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) { ctrl_ext = er32(CTRL_EXT); - ew32(CTRL_EXT, - ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); + ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD); } } @@ -1353,9 +1373,11 @@ static void e1000_set_itr(struct e1000_adapter *adapter) set_itr_now: if (new_itr != adapter->itr) { - /* this attempts to bias the interrupt rate towards Bulk + /* + * this attempts to bias the interrupt rate towards Bulk * by adding intermediate steps when interrupt rate is - * increasing */ + * increasing + */ new_itr = new_itr > adapter->itr ? min(adapter->itr + (new_itr >> 2), new_itr) : new_itr; @@ -1366,7 +1388,7 @@ set_itr_now: /** * e1000_clean - NAPI Rx polling callback - * @adapter: board private structure + * @napi: struct associated with this polling callback * @budget: amount of packets driver is allowed to process this poll **/ static int e1000_clean(struct napi_struct *napi, int budget) @@ -1378,10 +1400,12 @@ static int e1000_clean(struct napi_struct *napi, int budget) /* Must NOT use netdev_priv macro here. */ adapter = poll_dev->priv; - /* e1000_clean is called per-cpu. This lock protects + /* + * e1000_clean is called per-cpu. This lock protects * tx_ring from being cleaned by multiple cpus * simultaneously. A failure obtaining the lock means - * tx_ring is currently being cleaned anyway. */ + * tx_ring is currently being cleaned anyway. + */ if (spin_trylock(&adapter->tx_queue_lock)) { tx_cleaned = e1000_clean_tx_irq(adapter); spin_unlock(&adapter->tx_queue_lock); @@ -1427,9 +1451,12 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) struct e1000_hw *hw = &adapter->hw; u32 vfta, index; - e1000_irq_disable(adapter); + if (!test_bit(__E1000_DOWN, &adapter->state)) + e1000_irq_disable(adapter); vlan_group_set_device(adapter->vlgrp, vid, NULL); - e1000_irq_enable(adapter); + + if (!test_bit(__E1000_DOWN, &adapter->state)) + e1000_irq_enable(adapter); if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && @@ -1480,7 +1507,8 @@ static void e1000_vlan_rx_register(struct net_device *netdev, struct e1000_hw *hw = &adapter->hw; u32 ctrl, rctl; - e1000_irq_disable(adapter); + if (!test_bit(__E1000_DOWN, &adapter->state)) + e1000_irq_disable(adapter); adapter->vlgrp = grp; if (grp) { @@ -1517,7 +1545,8 @@ static void e1000_vlan_rx_register(struct net_device *netdev, } } - e1000_irq_enable(adapter); + if (!test_bit(__E1000_DOWN, &adapter->state)) + e1000_irq_enable(adapter); } static void e1000_restore_vlan(struct e1000_adapter *adapter) @@ -1546,9 +1575,11 @@ static void e1000_init_manageability(struct e1000_adapter *adapter) manc = er32(MANC); - /* enable receiving management packets to the host. this will probably + /* + * enable receiving management packets to the host. this will probably * generate destination unreachable messages from the host OS, but - * the packets will be handled on SMBUS */ + * the packets will be handled on SMBUS + */ manc |= E1000_MANC_EN_MNG2HOST; manc2h = er32(MANC2H); #define E1000_MNG2HOST_PORT_623 (1 << 5) @@ -1598,7 +1629,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) /* Set the Tx Interrupt Delay register */ ew32(TIDV, adapter->tx_int_delay); - /* tx irq moderation */ + /* Tx irq moderation */ ew32(TADV, adapter->tx_abs_int_delay); /* Program the Transmit Control Register */ @@ -1608,22 +1639,24 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT); if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) { - tarc = er32(TARC0); - /* set the speed mode bit, we'll clear it if we're not at - * gigabit link later */ + tarc = er32(TARC(0)); + /* + * set the speed mode bit, we'll clear it if we're not at + * gigabit link later + */ #define SPEED_MODE_BIT (1 << 21) tarc |= SPEED_MODE_BIT; - ew32(TARC0, tarc); + ew32(TARC(0), tarc); } /* errata: program both queues to unweighted RR */ if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) { - tarc = er32(TARC0); + tarc = er32(TARC(0)); tarc |= 1; - ew32(TARC0, tarc); - tarc = er32(TARC1); + ew32(TARC(0), tarc); + tarc = er32(TARC(1)); tarc |= 1; - ew32(TARC1, tarc); + ew32(TARC(1), tarc); } e1000e_config_collision_dist(hw); @@ -1731,8 +1764,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) /* Configure extra packet-split registers */ rfctl = er32(RFCTL); rfctl |= E1000_RFCTL_EXTEN; - /* disable packet split support for IPv6 extension headers, - * because some malformed IPv6 headers can hang the RX */ + /* + * disable packet split support for IPv6 extension headers, + * because some malformed IPv6 headers can hang the Rx + */ rfctl |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS); @@ -1761,6 +1796,8 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) } ew32(RCTL, rctl); + /* just started the receive unit, no need to restart */ + adapter->flags &= ~FLAG_RX_RESTART_NOW; } /** @@ -1801,8 +1838,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) /* irq moderation */ ew32(RADV, adapter->rx_abs_int_delay); if (adapter->itr_setting != 0) - ew32(ITR, - 1000000000 / (adapter->itr * 256)); + ew32(ITR, 1000000000 / (adapter->itr * 256)); ctrl_ext = er32(CTRL_EXT); /* Reset delay timers after every interrupt */ @@ -1813,8 +1849,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(CTRL_EXT, ctrl_ext); e1e_flush(); - /* Setup the HW Rx Head and Tail Descriptor Pointers and - * the Base and Length of the Rx Descriptor Ring */ + /* + * Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring + */ rdba = rx_ring->dma; ew32(RDBAL, (rdba & DMA_32BIT_MASK)); ew32(RDBAH, (rdba >> 32)); @@ -1829,8 +1867,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) if (adapter->flags & FLAG_RX_CSUM_ENABLED) { rxcsum |= E1000_RXCSUM_TUOFL; - /* IPv4 payload checksum for UDP fragments must be - * used in conjunction with packet-split. */ + /* + * IPv4 payload checksum for UDP fragments must be + * used in conjunction with packet-split. + */ if (adapter->rx_ps_pages) rxcsum |= E1000_RXCSUM_IPPCSE; } else { @@ -1839,9 +1879,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) } ew32(RXCSUM, rxcsum); - /* Enable early receives on supported devices, only takes effect when + /* + * Enable early receives on supported devices, only takes effect when * packet size is equal or larger than the specified value (in 8 byte - * units), e.g. using jumbo frames when setting to E1000_ERT_2048 */ + * units), e.g. using jumbo frames when setting to E1000_ERT_2048 + */ if ((adapter->flags & FLAG_HAS_ERT) && (adapter->netdev->mtu > ETH_DATA_LEN)) ew32(ERT, E1000_ERT_2048); @@ -1851,7 +1893,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) } /** - * e1000_mc_addr_list_update - Update Multicast addresses + * e1000_update_mc_addr_list - Update Multicast addresses * @hw: pointer to the HW structure * @mc_addr_list: array of multicast addresses to program * @mc_addr_count: number of multicast addresses to program @@ -1865,11 +1907,11 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) * exists and all implementations are handled in the generic version of this * function. **/ -static void e1000_mc_addr_list_update(struct e1000_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 rar_used_count, - u32 rar_count) +static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, + u32 mc_addr_count, u32 rar_used_count, + u32 rar_count) { - hw->mac.ops.mc_addr_list_update(hw, mc_addr_list, mc_addr_count, + hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count, rar_used_count, rar_count); } @@ -1923,7 +1965,7 @@ static void e1000_set_multi(struct net_device *netdev) mc_ptr = mc_ptr->next; } - e1000_mc_addr_list_update(hw, mta_list, i, 1, + e1000_update_mc_addr_list(hw, mta_list, i, 1, mac->rar_entry_count); kfree(mta_list); } else { @@ -1931,13 +1973,12 @@ static void e1000_set_multi(struct net_device *netdev) * if we're called from probe, we might not have * anything to do here, so clear out the list */ - e1000_mc_addr_list_update(hw, NULL, 0, 1, - mac->rar_entry_count); + e1000_update_mc_addr_list(hw, NULL, 0, 1, mac->rar_entry_count); } } /** - * e1000_configure - configure the hardware for RX and TX + * e1000_configure - configure the hardware for Rx and Tx * @adapter: private board structure **/ static void e1000_configure(struct e1000_adapter *adapter) @@ -1950,8 +1991,7 @@ static void e1000_configure(struct e1000_adapter *adapter) e1000_configure_tx(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); - adapter->alloc_rx_buf(adapter, - e1000_desc_unused(adapter->rx_ring)); + adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring)); } /** @@ -1967,9 +2007,11 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter) u16 mii_reg = 0; /* Just clear the power down bit to wake the phy back up */ - if (adapter->hw.media_type == e1000_media_type_copper) { - /* according to the manual, the phy will retain its - * settings across a power-down/up cycle */ + if (adapter->hw.phy.media_type == e1000_media_type_copper) { + /* + * According to the manual, the phy will retain its + * settings across a power-down/up cycle + */ e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg); mii_reg &= ~MII_CR_POWER_DOWN; e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg); @@ -1994,12 +2036,11 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) return; /* non-copper PHY? */ - if (adapter->hw.media_type != e1000_media_type_copper) + if (adapter->hw.phy.media_type != e1000_media_type_copper) return; /* reset is blocked because of a SoL/IDER session */ - if (e1000e_check_mng_mode(hw) || - e1000_check_reset_block(hw)) + if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw)) return; /* manageability (AMT) is enabled */ @@ -2019,51 +2060,61 @@ static void e1000_power_down_phy(struct e1000_adapter *adapter) * This function boots the hardware and enables some settings that * require a configuration cycle of the hardware - those cannot be * set/changed during runtime. After reset the device needs to be - * properly configured for rx, tx etc. + * properly configured for Rx, Tx etc. */ void e1000e_reset(struct e1000_adapter *adapter) { struct e1000_mac_info *mac = &adapter->hw.mac; + struct e1000_fc_info *fc = &adapter->hw.fc; struct e1000_hw *hw = &adapter->hw; u32 tx_space, min_tx_space, min_rx_space; - u32 pba; + u32 pba = adapter->pba; u16 hwm; - ew32(PBA, adapter->pba); + /* reset Packet Buffer Allocation to default */ + ew32(PBA, pba); - if (mac->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) { - /* To maintain wire speed transmits, the Tx FIFO should be + if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) { + /* + * To maintain wire speed transmits, the Tx FIFO should be * large enough to accommodate two full transmit packets, * rounded up to the next 1KB and expressed in KB. Likewise, * the Rx FIFO should be large enough to accommodate at least * one full receive packet and is similarly rounded up and - * expressed in KB. */ + * expressed in KB. + */ pba = er32(PBA); /* upper 16 bits has Tx packet buffer allocation size in KB */ tx_space = pba >> 16; /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; - /* the tx fifo also stores 16 bytes of information about the tx - * but don't include ethernet FCS because hardware appends it */ - min_tx_space = (mac->max_frame_size + + /* + * the Tx fifo also stores 16 bytes of information about the tx + * but don't include ethernet FCS because hardware appends it + */ + min_tx_space = (adapter->max_frame_size + sizeof(struct e1000_tx_desc) - ETH_FCS_LEN) * 2; min_tx_space = ALIGN(min_tx_space, 1024); min_tx_space >>= 10; /* software strips receive CRC, so leave room for it */ - min_rx_space = mac->max_frame_size; + min_rx_space = adapter->max_frame_size; min_rx_space = ALIGN(min_rx_space, 1024); min_rx_space >>= 10; - /* If current Tx allocation is less than the min Tx FIFO size, + /* + * If current Tx allocation is less than the min Tx FIFO size, * and the min Tx FIFO size is less than the current Rx FIFO - * allocation, take space away from current Rx allocation */ + * allocation, take space away from current Rx allocation + */ if ((tx_space < min_tx_space) && ((min_tx_space - tx_space) < pba)) { pba -= min_tx_space - tx_space; - /* if short on rx space, rx wins and must trump tx - * adjustment or use Early Receive if available */ + /* + * if short on Rx space, Rx wins and must trump tx + * adjustment or use Early Receive if available + */ if ((pba < min_rx_space) && (!(adapter->flags & FLAG_HAS_ERT))) /* ERT enabled in e1000_configure_rx */ @@ -2074,29 +2125,33 @@ void e1000e_reset(struct e1000_adapter *adapter) } - /* flow control settings */ - /* The high water mark must be low enough to fit one full frame + /* + * flow control settings + * + * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: * - 90% of the Rx FIFO size, and * - the full Rx FIFO size minus the early receive size (for parts * with ERT support assuming ERT set to E1000_ERT_2048), or - * - the full Rx FIFO size minus one full frame */ + * - the full Rx FIFO size minus one full frame + */ if (adapter->flags & FLAG_HAS_ERT) - hwm = min(((adapter->pba << 10) * 9 / 10), - ((adapter->pba << 10) - (E1000_ERT_2048 << 3))); + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - (E1000_ERT_2048 << 3))); else - hwm = min(((adapter->pba << 10) * 9 / 10), - ((adapter->pba << 10) - mac->max_frame_size)); + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - adapter->max_frame_size)); - mac->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */ - mac->fc_low_water = mac->fc_high_water - 8; + fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) - mac->fc_pause_time = 0xFFFF; + fc->pause_time = 0xFFFF; else - mac->fc_pause_time = E1000_FC_PAUSE_TIME; - mac->fc = mac->original_fc; + fc->pause_time = E1000_FC_PAUSE_TIME; + fc->send_xon = 1; + fc->type = fc->original_type; /* Allow time for pending master requests to run */ mac->ops.reset_hw(hw); @@ -2115,9 +2170,11 @@ void e1000e_reset(struct e1000_adapter *adapter) if (!(adapter->flags & FLAG_SMART_POWER_DOWN)) { u16 phy_data = 0; - /* speed up time to link by disabling smart power down, ignore + /* + * speed up time to link by disabling smart power down, ignore * the return value of this function because there is nothing - * different we would do if it failed */ + * different we would do if it failed + */ e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); phy_data &= ~IGP02E1000_PM_SPD; e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); @@ -2147,8 +2204,10 @@ void e1000e_down(struct e1000_adapter *adapter) struct e1000_hw *hw = &adapter->hw; u32 tctl, rctl; - /* signal that we're down so the interrupt handler does not - * reschedule our watchdog timer */ + /* + * signal that we're down so the interrupt handler does not + * reschedule our watchdog timer + */ set_bit(__E1000_DOWN, &adapter->state); /* disable receives in the hardware */ @@ -2167,7 +2226,6 @@ void e1000e_down(struct e1000_adapter *adapter) msleep(10); napi_disable(&adapter->napi); - atomic_set(&adapter->irq_sem, 0); e1000_irq_disable(adapter); del_timer_sync(&adapter->watchdog_timer); @@ -2208,13 +2266,12 @@ void e1000e_reinit_locked(struct e1000_adapter *adapter) **/ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; adapter->rx_ps_bsize0 = 128; - hw->mac.max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; - hw->mac.min_frame_size = ETH_ZLEN + ETH_FCS_LEN; + adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN; adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL); if (!adapter->tx_ring) @@ -2227,7 +2284,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) spin_lock_init(&adapter->tx_queue_lock); /* Explicitly disable IRQ since the NIC can be in any state. */ - atomic_set(&adapter->irq_sem, 0); e1000_irq_disable(adapter); spin_lock_init(&adapter->stats_lock); @@ -2281,16 +2337,20 @@ static int e1000_open(struct net_device *netdev) E1000_MNG_DHCP_COOKIE_STATUS_VLAN)) e1000_update_mng_vlan(adapter); - /* If AMT is enabled, let the firmware know that the network - * interface is now open */ + /* + * If AMT is enabled, let the firmware know that the network + * interface is now open + */ if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(&adapter->hw)) e1000_get_hw_control(adapter); - /* before we allocate an interrupt, we must be ready to handle it. + /* + * before we allocate an interrupt, we must be ready to handle it. * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt * as soon as we call pci_request_irq, so we have to setup our - * clean_rx handler before we do so. */ + * clean_rx handler before we do so. + */ e1000_configure(adapter); err = e1000_request_irq(adapter); @@ -2344,16 +2404,20 @@ static int e1000_close(struct net_device *netdev) e1000e_free_tx_resources(adapter); e1000e_free_rx_resources(adapter); - /* kill manageability vlan ID if supported, but not if a vlan with - * the same ID is registered on the host OS (let 8021q kill it) */ + /* + * kill manageability vlan ID if supported, but not if a vlan with + * the same ID is registered on the host OS (let 8021q kill it) + */ if ((adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && !(adapter->vlgrp && vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id))) e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); - /* If AMT is enabled, let the firmware know that the network - * interface is now closed */ + /* + * If AMT is enabled, let the firmware know that the network + * interface is now closed + */ if ((adapter->flags & FLAG_HAS_AMT) && e1000e_check_mng_mode(&adapter->hw)) e1000_release_hw_control(adapter); @@ -2384,12 +2448,14 @@ static int e1000_set_mac(struct net_device *netdev, void *p) /* activate the work around */ e1000e_set_laa_state_82571(&adapter->hw, 1); - /* Hold a copy of the LAA in RAR[14] This is done so that + /* + * Hold a copy of the LAA in RAR[14] This is done so that * between the time RAR[0] gets clobbered and the time it * gets fixed (in e1000_watchdog), the actual LAA is in one * of the RARs and no incoming packets directed to this port * are dropped. Eventually the LAA will be in RAR[0] and - * RAR[14] */ + * RAR[14] + */ e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, adapter->hw.mac.rar_entry_count - 1); @@ -2398,8 +2464,10 @@ static int e1000_set_mac(struct net_device *netdev, void *p) return 0; } -/* Need to wait a few seconds after link up to get diagnostic information from - * the phy */ +/* + * Need to wait a few seconds after link up to get diagnostic information from + * the phy + */ static void e1000_update_phy_info(unsigned long data) { struct e1000_adapter *adapter = (struct e1000_adapter *) data; @@ -2430,63 +2498,35 @@ void e1000e_update_stats(struct e1000_adapter *adapter) spin_lock_irqsave(&adapter->stats_lock, irq_flags); - /* these counters are modified from e1000_adjust_tbi_stats, + /* + * these counters are modified from e1000_adjust_tbi_stats, * called from the interrupt context, so they must only * be written while holding adapter->stats_lock */ adapter->stats.crcerrs += er32(CRCERRS); adapter->stats.gprc += er32(GPRC); - adapter->stats.gorcl += er32(GORCL); - adapter->stats.gorch += er32(GORCH); + adapter->stats.gorc += er32(GORCL); + er32(GORCH); /* Clear gorc */ adapter->stats.bprc += er32(BPRC); adapter->stats.mprc += er32(MPRC); adapter->stats.roc += er32(ROC); - if (adapter->flags & FLAG_HAS_STATS_PTC_PRC) { - adapter->stats.prc64 += er32(PRC64); - adapter->stats.prc127 += er32(PRC127); - adapter->stats.prc255 += er32(PRC255); - adapter->stats.prc511 += er32(PRC511); - adapter->stats.prc1023 += er32(PRC1023); - adapter->stats.prc1522 += er32(PRC1522); - adapter->stats.symerrs += er32(SYMERRS); - adapter->stats.sec += er32(SEC); - } - adapter->stats.mpc += er32(MPC); adapter->stats.scc += er32(SCC); adapter->stats.ecol += er32(ECOL); adapter->stats.mcc += er32(MCC); adapter->stats.latecol += er32(LATECOL); adapter->stats.dc += er32(DC); - adapter->stats.rlec += er32(RLEC); adapter->stats.xonrxc += er32(XONRXC); adapter->stats.xontxc += er32(XONTXC); adapter->stats.xoffrxc += er32(XOFFRXC); adapter->stats.xofftxc += er32(XOFFTXC); - adapter->stats.fcruc += er32(FCRUC); adapter->stats.gptc += er32(GPTC); - adapter->stats.gotcl += er32(GOTCL); - adapter->stats.gotch += er32(GOTCH); + adapter->stats.gotc += er32(GOTCL); + er32(GOTCH); /* Clear gotc */ adapter->stats.rnbc += er32(RNBC); adapter->stats.ruc += er32(RUC); - adapter->stats.rfc += er32(RFC); - adapter->stats.rjc += er32(RJC); - adapter->stats.torl += er32(TORL); - adapter->stats.torh += er32(TORH); - adapter->stats.totl += er32(TOTL); - adapter->stats.toth += er32(TOTH); - adapter->stats.tpr += er32(TPR); - - if (adapter->flags & FLAG_HAS_STATS_PTC_PRC) { - adapter->stats.ptc64 += er32(PTC64); - adapter->stats.ptc127 += er32(PTC127); - adapter->stats.ptc255 += er32(PTC255); - adapter->stats.ptc511 += er32(PTC511); - adapter->stats.ptc1023 += er32(PTC1023); - adapter->stats.ptc1522 += er32(PTC1522); - } adapter->stats.mptc += er32(MPTC); adapter->stats.bptc += er32(BPTC); @@ -2505,27 +2545,16 @@ void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.tsctc += er32(TSCTC); adapter->stats.tsctfc += er32(TSCTFC); - adapter->stats.iac += er32(IAC); - - if (adapter->flags & FLAG_HAS_STATS_ICR_ICT) { - adapter->stats.icrxoc += er32(ICRXOC); - adapter->stats.icrxptc += er32(ICRXPTC); - adapter->stats.icrxatc += er32(ICRXATC); - adapter->stats.ictxptc += er32(ICTXPTC); - adapter->stats.ictxatc += er32(ICTXATC); - adapter->stats.ictxqec += er32(ICTXQEC); - adapter->stats.ictxqmtc += er32(ICTXQMTC); - adapter->stats.icrxdmtc += er32(ICRXDMTC); - } - /* Fill out the OS statistics structure */ adapter->net_stats.multicast = adapter->stats.mprc; adapter->net_stats.collisions = adapter->stats.colc; /* Rx Errors */ - /* RLEC on some newer hardware can be incorrect so build - * our own version based on RUC and ROC */ + /* + * RLEC on some newer hardware can be incorrect so build + * our own version based on RUC and ROC + */ adapter->net_stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + @@ -2546,7 +2575,7 @@ void e1000e_update_stats(struct e1000_adapter *adapter) /* Tx Dropped needs to be maintained elsewhere */ /* Phy Stats */ - if (hw->media_type == e1000_media_type_copper) { + if (hw->phy.media_type == e1000_media_type_copper) { if ((adapter->link_speed == SPEED_1000) && (!e1e_rphy(hw, PHY_1000T_STATUS, &phy_tmp))) { phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK; @@ -2562,10 +2591,58 @@ void e1000e_update_stats(struct e1000_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); } +/** + * e1000_phy_read_status - Update the PHY register status snapshot + * @adapter: board private structure + **/ +static void e1000_phy_read_status(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct e1000_phy_regs *phy = &adapter->phy_regs; + int ret_val; + unsigned long irq_flags; + + + spin_lock_irqsave(&adapter->stats_lock, irq_flags); + + if ((er32(STATUS) & E1000_STATUS_LU) && + (adapter->hw.phy.media_type == e1000_media_type_copper)) { + ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr); + ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr); + ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise); + ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa); + ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion); + ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000); + ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); + ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); + if (ret_val) + ndev_warn(adapter->netdev, + "Error reading PHY register\n"); + } else { + /* + * Do not read PHY registers if link is not up + * Set values to typical power-on defaults + */ + phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX); + phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL | + BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE | + BMSR_ERCAP); + phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP | + ADVERTISE_ALL | ADVERTISE_CSMA); + phy->lpa = 0; + phy->expansion = EXPANSION_ENABLENPAGE; + phy->ctrl1000 = ADVERTISE_1000FULL; + phy->stat1000 = 0; + phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF); + } + + spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); +} + static void e1000_print_link_info(struct e1000_adapter *adapter) { - struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; u32 ctrl = er32(CTRL); ndev_info(netdev, @@ -2579,6 +2656,62 @@ static void e1000_print_link_info(struct e1000_adapter *adapter) ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); } +static bool e1000_has_link(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + bool link_active = 0; + s32 ret_val = 0; + + /* + * get_link_status is set on LSC (link status) interrupt or + * Rx sequence error interrupt. get_link_status will stay + * false until the check_for_link establishes link + * for copper adapters ONLY + */ + switch (hw->phy.media_type) { + case e1000_media_type_copper: + if (hw->mac.get_link_status) { + ret_val = hw->mac.ops.check_for_link(hw); + link_active = !hw->mac.get_link_status; + } else { + link_active = 1; + } + break; + case e1000_media_type_fiber: + ret_val = hw->mac.ops.check_for_link(hw); + link_active = !!(er32(STATUS) & E1000_STATUS_LU); + break; + case e1000_media_type_internal_serdes: + ret_val = hw->mac.ops.check_for_link(hw); + link_active = adapter->hw.mac.serdes_has_link; + break; + default: + case e1000_media_type_unknown: + break; + } + + if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && + (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { + /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ + ndev_info(adapter->netdev, + "Gigabit has been disabled, downgrading speed\n"); + } + + return link_active; +} + +static void e1000e_enable_receives(struct e1000_adapter *adapter) +{ + /* make sure the receive unit is started */ + if ((adapter->flags & FLAG_RX_NEEDS_RESTART) && + (adapter->flags & FLAG_RX_RESTART_NOW)) { + struct e1000_hw *hw = &adapter->hw; + u32 rctl = er32(RCTL); + ew32(RCTL, rctl | E1000_RCTL_EN); + adapter->flags &= ~FLAG_RX_RESTART_NOW; + } +} + /** * e1000_watchdog - Timer Call-back * @data: pointer to adapter cast into an unsigned long @@ -2597,48 +2730,36 @@ static void e1000_watchdog_task(struct work_struct *work) { struct e1000_adapter *adapter = container_of(work, struct e1000_adapter, watchdog_task); - struct net_device *netdev = adapter->netdev; struct e1000_mac_info *mac = &adapter->hw.mac; struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_hw *hw = &adapter->hw; u32 link, tctl; - s32 ret_val; int tx_pending = 0; - if ((netif_carrier_ok(netdev)) && - (er32(STATUS) & E1000_STATUS_LU)) + link = e1000_has_link(adapter); + if ((netif_carrier_ok(netdev)) && link) { + e1000e_enable_receives(adapter); goto link_up; - - ret_val = mac->ops.check_for_link(hw); - if ((ret_val == E1000_ERR_PHY) && - (adapter->hw.phy.type == e1000_phy_igp_3) && - (er32(CTRL) & - E1000_PHY_CTRL_GBE_DISABLE)) { - /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ - ndev_info(netdev, - "Gigabit has been disabled, downgrading speed\n"); } if ((e1000e_enable_tx_pkt_filtering(hw)) && (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id)) e1000_update_mng_vlan(adapter); - if ((adapter->hw.media_type == e1000_media_type_internal_serdes) && - !(er32(TXCW) & E1000_TXCW_ANE)) - link = adapter->hw.mac.serdes_has_link; - else - link = er32(STATUS) & E1000_STATUS_LU; - if (link) { if (!netif_carrier_ok(netdev)) { bool txb2b = 1; + /* update snapshot of PHY registers on LSC */ + e1000_phy_read_status(adapter); mac->ops.get_link_up_info(&adapter->hw, &adapter->link_speed, &adapter->link_duplex); e1000_print_link_info(adapter); - /* tweak tx_queue_len according to speed/duplex - * and adjust the timeout factor */ + /* + * tweak tx_queue_len according to speed/duplex + * and adjust the timeout factor + */ netdev->tx_queue_len = adapter->tx_queue_len; adapter->tx_timeout_factor = 1; switch (adapter->link_speed) { @@ -2654,18 +2775,22 @@ static void e1000_watchdog_task(struct work_struct *work) break; } - /* workaround: re-program speed mode bit after - * link-up event */ + /* + * workaround: re-program speed mode bit after + * link-up event + */ if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) && !txb2b) { u32 tarc0; - tarc0 = er32(TARC0); + tarc0 = er32(TARC(0)); tarc0 &= ~SPEED_MODE_BIT; - ew32(TARC0, tarc0); + ew32(TARC(0), tarc0); } - /* disable TSO for pcie and 10/100 speeds, to avoid - * some hardware issues */ + /* + * disable TSO for pcie and 10/100 speeds, to avoid + * some hardware issues + */ if (!(adapter->flags & FLAG_TSO_FORCE)) { switch (adapter->link_speed) { case SPEED_10: @@ -2685,8 +2810,10 @@ static void e1000_watchdog_task(struct work_struct *work) } } - /* enable transmits in the hardware, need to do this - * after setting TARC0 */ + /* + * enable transmits in the hardware, need to do this + * after setting TARC(0) + */ tctl = er32(TCTL); tctl |= E1000_TCTL_EN; ew32(TCTL, tctl); @@ -2697,13 +2824,6 @@ static void e1000_watchdog_task(struct work_struct *work) if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); - } else { - /* make sure the receive unit is started */ - if (adapter->flags & FLAG_RX_NEEDS_RESTART) { - u32 rctl = er32(RCTL); - ew32(RCTL, rctl | - E1000_RCTL_EN); - } } } else { if (netif_carrier_ok(netdev)) { @@ -2729,10 +2849,10 @@ link_up: mac->collision_delta = adapter->stats.colc - adapter->colc_old; adapter->colc_old = adapter->stats.colc; - adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old; - adapter->gorcl_old = adapter->stats.gorcl; - adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old; - adapter->gotcl_old = adapter->stats.gotcl; + adapter->gorc = adapter->stats.gorc - adapter->gorc_old; + adapter->gorc_old = adapter->stats.gorc; + adapter->gotc = adapter->stats.gotc - adapter->gotc_old; + adapter->gotc_old = adapter->stats.gotc; e1000e_update_adaptive(&adapter->hw); @@ -2740,23 +2860,27 @@ link_up: tx_pending = (e1000_desc_unused(tx_ring) + 1 < tx_ring->count); if (tx_pending) { - /* We've lost link, so the controller stops DMA, + /* + * We've lost link, so the controller stops DMA, * but we've got queued Tx work that's never going * to get done, so reset controller to flush Tx. - * (Do the reset outside of interrupt context). */ + * (Do the reset outside of interrupt context). + */ adapter->tx_timeout_count++; schedule_work(&adapter->reset_task); } } - /* Cause software interrupt to ensure rx ring is cleaned */ + /* Cause software interrupt to ensure Rx ring is cleaned */ ew32(ICS, E1000_ICS_RXDMT0); /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = 1; - /* With 82571 controllers, LAA may be overwritten due to controller - * reset from the other port. Set the appropriate LAA in RAR[0] */ + /* + * With 82571 controllers, LAA may be overwritten due to controller + * reset from the other port. Set the appropriate LAA in RAR[0] + */ if (e1000e_get_laa_state_82571(hw)) e1000e_rar_set(hw, adapter->hw.mac.addr, 0); @@ -3032,16 +3156,20 @@ static void e1000_tx_queue(struct e1000_adapter *adapter, tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd); - /* Force memory writes to complete before letting h/w + /* + * Force memory writes to complete before letting h/w * know there are new descriptors to fetch. (Only * applicable for weak-ordered memory model archs, - * such as IA-64). */ + * such as IA-64). + */ wmb(); tx_ring->next_to_use = i; writel(i, adapter->hw.hw_addr + tx_ring->tail); - /* we need this if more than one processor can write to our tail - * at a time, it synchronizes IO on IA64/Altix systems */ + /* + * we need this if more than one processor can write to our tail + * at a time, it synchronizes IO on IA64/Altix systems + */ mmiowb(); } @@ -3089,13 +3217,17 @@ static int __e1000_maybe_stop_tx(struct net_device *netdev, int size) struct e1000_adapter *adapter = netdev_priv(netdev); netif_stop_queue(netdev); - /* Herbert's original patch had: + /* + * Herbert's original patch had: * smp_mb__after_netif_stop_queue(); - * but since that doesn't exist yet, just open code it. */ + * but since that doesn't exist yet, just open code it. + */ smp_mb(); - /* We need to check again in a case another CPU has just - * made room available. */ + /* + * We need to check again in a case another CPU has just + * made room available. + */ if (e1000_desc_unused(adapter->tx_ring) < size) return -EBUSY; @@ -3142,21 +3274,29 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) } mss = skb_shinfo(skb)->gso_size; - /* The controller does a simple calculation to + /* + * The controller does a simple calculation to * make sure there is enough room in the FIFO before * initiating the DMA for each buffer. The calc is: * 4 = ceil(buffer len/mss). To make sure we don't * overrun the FIFO, adjust the max buffer len if mss - * drops. */ + * drops. + */ if (mss) { u8 hdr_len; max_per_txd = min(mss << 2, max_per_txd); max_txd_pwr = fls(max_per_txd) - 1; - /* TSO Workaround for 82571/2/3 Controllers -- if skb->data - * points to just header, pull a few bytes of payload from - * frags into skb->data */ + /* + * TSO Workaround for 82571/2/3 Controllers -- if skb->data + * points to just header, pull a few bytes of payload from + * frags into skb->data + */ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + /* + * we do this workaround for ES2LAN, but it is un-necessary, + * avoiding it could save a lot of cycles + */ if (skb->data_len && (hdr_len == len)) { unsigned int pull_size; @@ -3190,8 +3330,10 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* Collision - tell upper layer to requeue */ return NETDEV_TX_LOCKED; - /* need: count + 2 desc gap to keep tail from touching - * head, otherwise try next time */ + /* + * need: count + 2 desc gap to keep tail from touching + * head, otherwise try next time + */ if (e1000_maybe_stop_tx(netdev, count + 2)) { spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); return NETDEV_TX_BUSY; @@ -3216,9 +3358,11 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) else if (e1000_tx_csum(adapter, skb)) tx_flags |= E1000_TX_FLAGS_CSUM; - /* Old method was to assume IPv4 packet by default if TSO was enabled. + /* + * Old method was to assume IPv4 packet by default if TSO was enabled. * 82571 hardware supports TSO capabilities for IPv6 as well... - * no longer assume, we must. */ + * no longer assume, we must. + */ if (skb->protocol == htons(ETH_P_IP)) tx_flags |= E1000_TX_FLAGS_IPV4; @@ -3316,14 +3460,16 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) msleep(1); /* e1000e_down has a dependency on max_frame_size */ - adapter->hw.mac.max_frame_size = max_frame; + adapter->max_frame_size = max_frame; if (netif_running(netdev)) e1000e_down(adapter); - /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN + /* + * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN * means we reserve 2 more, this pushes us to allocate from the next * larger slab size. - * i.e. RXBUFFER_2048 --> size-4096 slab */ + * i.e. RXBUFFER_2048 --> size-4096 slab + */ if (max_frame <= 256) adapter->rx_buffer_len = 256; @@ -3340,7 +3486,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) || (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN)) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN - + ETH_FCS_LEN ; + + ETH_FCS_LEN; ndev_info(netdev, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); @@ -3361,9 +3507,8 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, { struct e1000_adapter *adapter = netdev_priv(netdev); struct mii_ioctl_data *data = if_mii(ifr); - unsigned long irq_flags; - if (adapter->hw.media_type != e1000_media_type_copper) + if (adapter->hw.phy.media_type != e1000_media_type_copper) return -EOPNOTSUPP; switch (cmd) { @@ -3373,13 +3518,40 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, case SIOCGMIIREG: if (!capable(CAP_NET_ADMIN)) return -EPERM; - spin_lock_irqsave(&adapter->stats_lock, irq_flags); - if (e1e_rphy(&adapter->hw, data->reg_num & 0x1F, - &data->val_out)) { - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); + switch (data->reg_num & 0x1F) { + case MII_BMCR: + data->val_out = adapter->phy_regs.bmcr; + break; + case MII_BMSR: + data->val_out = adapter->phy_regs.bmsr; + break; + case MII_PHYSID1: + data->val_out = (adapter->hw.phy.id >> 16); + break; + case MII_PHYSID2: + data->val_out = (adapter->hw.phy.id & 0xFFFF); + break; + case MII_ADVERTISE: + data->val_out = adapter->phy_regs.advertise; + break; + case MII_LPA: + data->val_out = adapter->phy_regs.lpa; + break; + case MII_EXPANSION: + data->val_out = adapter->phy_regs.expansion; + break; + case MII_CTRL1000: + data->val_out = adapter->phy_regs.ctrl1000; + break; + case MII_STAT1000: + data->val_out = adapter->phy_regs.stat1000; + break; + case MII_ESTATUS: + data->val_out = adapter->phy_regs.estatus; + break; + default: return -EIO; } - spin_unlock_irqrestore(&adapter->stats_lock, irq_flags); break; case SIOCSMIIREG: default: @@ -3445,8 +3617,9 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) E1000_CTRL_EN_PHY_PWR_MGMT; ew32(CTRL, ctrl); - if (adapter->hw.media_type == e1000_media_type_fiber || - adapter->hw.media_type == e1000_media_type_internal_serdes) { + if (adapter->hw.phy.media_type == e1000_media_type_fiber || + adapter->hw.phy.media_type == + e1000_media_type_internal_serdes) { /* keep the laser running in D3 */ ctrl_ext = er32(CTRL_EXT); ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA; @@ -3476,8 +3649,10 @@ static int e1000_suspend(struct pci_dev *pdev, pm_message_t state) if (adapter->hw.phy.type == e1000_phy_igp_3) e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ + /* + * Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. + */ e1000_release_hw_control(adapter); pci_disable_device(pdev); @@ -3552,9 +3727,11 @@ static int e1000_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* If the controller has AMT, do not set DRV_LOAD until the interface + /* + * If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now - * under the control of the driver. */ + * under the control of the driver. + */ if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw)) e1000_get_hw_control(adapter); @@ -3630,6 +3807,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) return PCI_ERS_RESULT_DISCONNECT; } pci_set_master(pdev); + pci_restore_state(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); @@ -3665,9 +3843,11 @@ static void e1000_io_resume(struct pci_dev *pdev) netif_device_attach(netdev); - /* If the controller has AMT, do not set DRV_LOAD until the interface + /* + * If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now - * under the control of the driver. */ + * under the control of the driver. + */ if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw)) e1000_get_hw_control(adapter); @@ -3678,7 +3858,7 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; struct net_device *netdev = adapter->netdev; - u32 part_num; + u32 pba_num; /* print bus type/speed/width info */ ndev_info(netdev, "(PCI Express:2.5GB/s:%s) " @@ -3693,10 +3873,10 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n", (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000"); - e1000e_read_part_num(hw, &part_num); + e1000e_read_pba_num(hw, &pba_num); ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", hw->mac.type, hw->phy.type, - (part_num >> 8), (part_num & 0xff)); + (pba_num >> 8), (pba_num & 0xff)); } /** @@ -3754,6 +3934,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, goto err_pci_reg; pci_set_master(pdev); + pci_save_state(pdev); err = -ENOMEM; netdev = alloc_etherdev(sizeof(struct e1000_adapter)); @@ -3828,16 +4009,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev, memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops)); memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops)); - err = ei->get_invariants(adapter); + err = ei->get_variants(adapter); if (err) goto err_hw_init; hw->mac.ops.get_bus_info(&adapter->hw); - adapter->hw.phy.wait_for_link = 0; + adapter->hw.phy.autoneg_wait_to_complete = 0; /* Copper options */ - if (adapter->hw.media_type == e1000_media_type_copper) { + if (adapter->hw.phy.media_type == e1000_media_type_copper) { adapter->hw.phy.mdix = AUTO_ALL_MODES; adapter->hw.phy.disable_polarity_correction = 0; adapter->hw.phy.ms_type = e1000_ms_hw_default; @@ -3861,15 +4042,19 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; - /* We should not be using LLTX anymore, but we are still TX faster with - * it. */ + /* + * We should not be using LLTX anymore, but we are still Tx faster with + * it. + */ netdev->features |= NETIF_F_LLTX; if (e1000e_enable_mng_pass_thru(&adapter->hw)) adapter->flags |= FLAG_MNG_PT_ENABLED; - /* before reading the NVM, reset the controller to - * put the device in a known good starting state */ + /* + * before reading the NVM, reset the controller to + * put the device in a known good starting state + */ adapter->hw.mac.ops.reset_hw(&adapter->hw); /* @@ -3919,8 +4104,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; adapter->fc_autoneg = 1; - adapter->hw.mac.original_fc = e1000_fc_default; - adapter->hw.mac.fc = e1000_fc_default; + adapter->hw.fc.original_type = e1000_fc_default; + adapter->hw.fc.type = e1000_fc_default; adapter->hw.phy.autoneg_advertised = 0x2f; /* ring size defaults */ @@ -3963,9 +4148,11 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* reset the hardware with the new settings */ e1000e_reset(adapter); - /* If the controller has AMT, do not set DRV_LOAD until the interface + /* + * If the controller has AMT, do not set DRV_LOAD until the interface * is up. For all other cases, let the f/w know that the h/w is now - * under the control of the driver. */ + * under the control of the driver. + */ if (!(adapter->flags & FLAG_HAS_AMT) || !e1000e_check_mng_mode(&adapter->hw)) e1000_get_hw_control(adapter); @@ -4022,16 +4209,20 @@ static void __devexit e1000_remove(struct pci_dev *pdev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - /* flush_scheduled work may reschedule our watchdog task, so - * explicitly disable watchdog tasks from being rescheduled */ + /* + * flush_scheduled work may reschedule our watchdog task, so + * explicitly disable watchdog tasks from being rescheduled + */ set_bit(__E1000_DOWN, &adapter->state); del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); flush_scheduled_work(); - /* Release control of h/w to f/w. If f/w is AMT enabled, this - * would have already happened in close and is redundant. */ + /* + * Release control of h/w to f/w. If f/w is AMT enabled, this + * would have already happened in close and is redundant. + */ e1000_release_hw_control(adapter); unregister_netdev(netdev); @@ -4069,13 +4260,16 @@ static struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT), board_80003es2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT), @@ -4084,6 +4278,7 @@ static struct pci_device_id e1000_pci_tbl[] = { board_80003es2lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT), board_80003es2lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan }, @@ -4091,6 +4286,7 @@ static struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan }, @@ -4108,7 +4304,7 @@ static struct pci_driver e1000_driver = { .probe = e1000_probe, .remove = __devexit_p(e1000_remove), #ifdef CONFIG_PM - /* Power Managment Hooks */ + /* Power Management Hooks */ .suspend = e1000_suspend, .resume = e1000_resume, #endif @@ -4127,7 +4323,7 @@ static int __init e1000_init_module(void) int ret; printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_name, e1000e_driver_version); - printk(KERN_INFO "%s: Copyright (c) 1999-2007 Intel Corporation.\n", + printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n", e1000e_driver_name); ret = pci_register_driver(&e1000_driver); |