diff options
Diffstat (limited to 'drivers/net/e1000e/netdev.c')
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 45 |
1 files changed, 15 insertions, 30 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 57f149b75fb..88d54d3efce 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2541,22 +2541,14 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) * @hw: pointer to the HW structure * @mc_addr_list: array of multicast addresses to program * @mc_addr_count: number of multicast addresses to program - * @rar_used_count: the first RAR register free to program - * @rar_count: total number of supported Receive Address Registers * - * Updates the Receive Address Registers and Multicast Table Array. + * Updates the Multicast Table Array. * The caller must have a packed mc_addr_list of multicast addresses. - * The parameter rar_count will usually be hw->mac.rar_entry_count - * unless there are workarounds that change this. Currently no func pointer - * exists and all implementations are handled in the generic version of this - * function. **/ static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count, u32 rar_used_count, - u32 rar_count) + u32 mc_addr_count) { - hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count, - rar_used_count, rar_count); + hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count); } /** @@ -2572,7 +2564,6 @@ static void e1000_set_multi(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - struct e1000_mac_info *mac = &hw->mac; struct dev_mc_list *mc_ptr; u8 *mta_list; u32 rctl; @@ -2598,31 +2589,25 @@ static void e1000_set_multi(struct net_device *netdev) ew32(RCTL, rctl); - if (netdev->mc_count) { - mta_list = kmalloc(netdev->mc_count * 6, GFP_ATOMIC); + if (!netdev_mc_empty(netdev)) { + mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC); if (!mta_list) return; /* prepare a packed array of only addresses. */ - mc_ptr = netdev->mc_list; - - for (i = 0; i < netdev->mc_count; i++) { - if (!mc_ptr) - break; - memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, - ETH_ALEN); - mc_ptr = mc_ptr->next; - } + i = 0; + netdev_for_each_mc_addr(mc_ptr, netdev) + memcpy(mta_list + (i++ * ETH_ALEN), + mc_ptr->dmi_addr, ETH_ALEN); - e1000_update_mc_addr_list(hw, mta_list, i, 1, - mac->rar_entry_count); + e1000_update_mc_addr_list(hw, mta_list, i); kfree(mta_list); } else { /* * if we're called from probe, we might not have * anything to do here, so clear out the list */ - e1000_update_mc_addr_list(hw, NULL, 0, 1, mac->rar_entry_count); + e1000_update_mc_addr_list(hw, NULL, 0); } } @@ -3482,7 +3467,7 @@ static void e1000_print_link_info(struct e1000_adapter *adapter) ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); } -bool e1000_has_link(struct e1000_adapter *adapter) +bool e1000e_has_link(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; bool link_active = 0; @@ -3563,7 +3548,7 @@ static void e1000_watchdog_task(struct work_struct *work) u32 link, tctl; int tx_pending = 0; - link = e1000_has_link(adapter); + link = e1000e_has_link(adapter); if ((netif_carrier_ok(netdev)) && link) { e1000e_enable_receives(adapter); goto link_up; @@ -5134,7 +5119,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, e1000_eeprom_checks(adapter); - /* copy the MAC address out of the NVM */ + /* copy the MAC address */ if (e1000e_read_mac_addr(&adapter->hw)) e_err("NVM Read Error while reading MAC address\n"); @@ -5326,7 +5311,7 @@ static struct pci_error_handlers e1000_err_handler = { .resume = e1000_io_resume, }; -static struct pci_device_id e1000_pci_tbl[] = { +static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 }, |