diff options
Diffstat (limited to 'drivers/net/e1000e/param.c')
| -rw-r--r-- | drivers/net/e1000e/param.c | 382 |
1 files changed, 382 insertions, 0 deletions
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c new file mode 100644 index 00000000000..e4e655efb23 --- /dev/null +++ b/drivers/net/e1000e/param.c @@ -0,0 +1,382 @@ +/******************************************************************************* + + Intel PRO/1000 Linux driver + Copyright(c) 1999 - 2007 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/netdevice.h> + +#include "e1000.h" + +/* This is the only thing that needs to be changed to adjust the + * maximum number of ports that the driver can manage. + */ + +#define E1000_MAX_NIC 32 + +#define OPTION_UNSET -1 +#define OPTION_DISABLED 0 +#define OPTION_ENABLED 1 + +#define COPYBREAK_DEFAULT 256 +unsigned int copybreak = COPYBREAK_DEFAULT; +module_param(copybreak, uint, 0644); +MODULE_PARM_DESC(copybreak, + "Maximum size of packet that is copied to a new buffer on receive"); + +/* All parameters are treated the same, as an integer array of values. + * This macro just reduces the need to repeat the same declaration code + * over and over (plus this helps to avoid typo bugs). + */ + +#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET } +#define E1000_PARAM(X, desc) \ + static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \ + static int num_##X; \ + module_param_array_named(X, X, int, &num_##X, 0); \ + MODULE_PARM_DESC(X, desc); + + +/* Transmit Interrupt Delay in units of 1.024 microseconds + * Tx interrupt delay needs to typically be set to something non zero + * + * Valid Range: 0-65535 + */ +E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay"); +#define DEFAULT_TIDV 8 +#define MAX_TXDELAY 0xFFFF +#define MIN_TXDELAY 0 + +/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds + * + * Valid Range: 0-65535 + */ +E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay"); +#define DEFAULT_TADV 32 +#define MAX_TXABSDELAY 0xFFFF +#define MIN_TXABSDELAY 0 + +/* Receive Interrupt Delay in units of 1.024 microseconds + * hardware will likely hang if you set this to anything but zero. + * + * Valid Range: 0-65535 + */ +E1000_PARAM(RxIntDelay, "Receive Interrupt Delay"); +#define DEFAULT_RDTR 0 +#define MAX_RXDELAY 0xFFFF +#define MIN_RXDELAY 0 + +/* Receive Absolute Interrupt Delay in units of 1.024 microseconds + * + * Valid Range: 0-65535 + */ +E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); +#define DEFAULT_RADV 8 +#define MAX_RXABSDELAY 0xFFFF +#define MIN_RXABSDELAY 0 + +/* Interrupt Throttle Rate (interrupts/sec) + * + * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) + */ +E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); +#define DEFAULT_ITR 3 +#define MAX_ITR 100000 +#define MIN_ITR 100 + +/* Enable Smart Power Down of the PHY + * + * Valid Range: 0, 1 + * + * Default Value: 0 (disabled) + */ +E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down"); + +/* Enable Kumeran Lock Loss workaround + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); + +struct e1000_option { + enum { enable_option, range_option, list_option } type; + char *name; + char *err; + int def; + union { + struct { /* range_option info */ + int min; + int max; + } r; + struct { /* list_option info */ + int nr; + struct e1000_opt_list { int i; char *str; } *p; + } l; + } arg; +}; + +static int __devinit e1000_validate_option(int *value, + struct e1000_option *opt, + struct e1000_adapter *adapter) +{ + if (*value == OPTION_UNSET) { + *value = opt->def; + return 0; + } + + switch (opt->type) { + case enable_option: + switch (*value) { + case OPTION_ENABLED: + ndev_info(adapter->netdev, "%s Enabled\n", opt->name); + return 0; + case OPTION_DISABLED: + ndev_info(adapter->netdev, "%s Disabled\n", opt->name); + return 0; + } + break; + case range_option: + if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { + ndev_info(adapter->netdev, + "%s set to %i\n", opt->name, *value); + return 0; + } + break; + case list_option: { + int i; + struct e1000_opt_list *ent; + + for (i = 0; i < opt->arg.l.nr; i++) { + ent = &opt->arg.l.p[i]; + if (*value == ent->i) { + if (ent->str[0] != '\0') + ndev_info(adapter->netdev, "%s\n", + ent->str); + return 0; + } + } + } + break; + default: + BUG(); + } + + ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n", + opt->name, *value, opt->err); + *value = opt->def; + return -1; +} + +/** + * e1000e_check_options - Range Checking for Command Line Parameters + * @adapter: board private structure + * + * This routine checks all command line parameters for valid user + * input. If an invalid value is given, or if no user specified + * value exists, a default value is used. The final value is stored + * in a variable in the adapter structure. + **/ +void __devinit e1000e_check_options(struct e1000_adapter *adapter) +{ + struct e1000_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + int bd = adapter->bd_number; + + if (bd >= E1000_MAX_NIC) { + ndev_notice(netdev, + "Warning: no configuration for board #%i\n", bd); + ndev_notice(netdev, "Using defaults for all values\n"); + } + + { /* Transmit Interrupt Delay */ + struct e1000_option opt = { + .type = range_option, + .name = "Transmit Interrupt Delay", + .err = "using default of " + __MODULE_STRING(DEFAULT_TIDV), + .def = DEFAULT_TIDV, + .arg = { .r = { .min = MIN_TXDELAY, + .max = MAX_TXDELAY } } + }; + + if (num_TxIntDelay > bd) { + adapter->tx_int_delay = TxIntDelay[bd]; + e1000_validate_option(&adapter->tx_int_delay, &opt, + adapter); + } else { + adapter->tx_int_delay = opt.def; + } + } + { /* Transmit Absolute Interrupt Delay */ + struct e1000_option opt = { + .type = range_option, + .name = "Transmit Absolute Interrupt Delay", + .err = "using default of " + __MODULE_STRING(DEFAULT_TADV), + .def = DEFAULT_TADV, + .arg = { .r = { .min = MIN_TXABSDELAY, + .max = MAX_TXABSDELAY } } + }; + + if (num_TxAbsIntDelay > bd) { + adapter->tx_abs_int_delay = TxAbsIntDelay[bd]; + e1000_validate_option(&adapter->tx_abs_int_delay, &opt, + adapter); + } else { + adapter->tx_abs_int_delay = opt.def; + } + } + { /* Receive Interrupt Delay */ + struct e1000_option opt = { + .type = range_option, + .name = "Receive Interrupt Delay", + .err = "using default of " + __MODULE_STRING(DEFAULT_RDTR), + .def = DEFAULT_RDTR, + .arg = { .r = { .min = MIN_RXDELAY, + .max = MAX_RXDELAY } } + }; + + /* modify min and default if 82573 for slow ping w/a, + * a value greater than 8 needs to be set for RDTR */ + if (adapter->flags & FLAG_HAS_ASPM) { + opt.def = 32; + opt.arg.r.min = 8; + } + + if (num_RxIntDelay > bd) { + adapter->rx_int_delay = RxIntDelay[bd]; + e1000_validate_option(&adapter->rx_int_delay, &opt, + adapter); + } else { + adapter->rx_int_delay = opt.def; + } + } + { /* Receive Absolute Interrupt Delay */ + struct e1000_option opt = { + .type = range_option, + .name = "Receive Absolute Interrupt Delay", + .err = "using default of " + __MODULE_STRING(DEFAULT_RADV), + .def = DEFAULT_RADV, + .arg = { .r = { .min = MIN_RXABSDELAY, + .max = MAX_RXABSDELAY } } + }; + + if (num_RxAbsIntDelay > bd) { + adapter->rx_abs_int_delay = RxAbsIntDelay[bd]; + e1000_validate_option(&adapter->rx_abs_int_delay, &opt, + adapter); + } else { + adapter->rx_abs_int_delay = opt.def; + } + } + { /* Interrupt Throttling Rate */ + struct e1000_option opt = { + .type = range_option, + .name = "Interrupt Throttling Rate (ints/sec)", + .err = "using default of " + __MODULE_STRING(DEFAULT_ITR), + .def = DEFAULT_ITR, + .arg = { .r = { .min = MIN_ITR, + .max = MAX_ITR } } + }; + + if (num_InterruptThrottleRate > bd) { + adapter->itr = InterruptThrottleRate[bd]; + switch (adapter->itr) { + case 0: + ndev_info(netdev, "%s turned off\n", + opt.name); + break; + case 1: + ndev_info(netdev, + "%s set to dynamic mode\n", + opt.name); + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; + break; + case 3: + ndev_info(netdev, + "%s set to dynamic conservative mode\n", + opt.name); + adapter->itr_setting = adapter->itr; + adapter->itr = 20000; + break; + default: + e1000_validate_option(&adapter->itr, &opt, + adapter); + /* + * save the setting, because the dynamic bits + * change itr. clear the lower two bits + * because they are used as control + */ + adapter->itr_setting = adapter->itr & ~3; + break; + } + } else { + adapter->itr_setting = opt.def; + adapter->itr = 20000; + } + } + { /* Smart Power Down */ + struct e1000_option opt = { + .type = enable_option, + .name = "PHY Smart Power Down", + .err = "defaulting to Disabled", + .def = OPTION_DISABLED + }; + + if (num_SmartPowerDownEnable > bd) { + int spd = SmartPowerDownEnable[bd]; + e1000_validate_option(&spd, &opt, adapter); + if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) + && spd) + adapter->flags |= FLAG_SMART_POWER_DOWN; + } + } + { /* Kumeran Lock Loss Workaround */ + struct e1000_option opt = { + .type = enable_option, + .name = "Kumeran Lock Loss Workaround", + .err = "defaulting to Enabled", + .def = OPTION_ENABLED + }; + + if (num_KumeranLockLoss > bd) { + int kmrn_lock_loss = KumeranLockLoss[bd]; + e1000_validate_option(&kmrn_lock_loss, &opt, adapter); + if (hw->mac.type == e1000_ich8lan) + e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, + kmrn_lock_loss); + } else { + if (hw->mac.type == e1000_ich8lan) + e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, + opt.def); + } + } +} |