diff options
Diffstat (limited to 'drivers/net/e1000e/phy.c')
-rw-r--r-- | drivers/net/e1000e/phy.c | 40 |
1 files changed, 17 insertions, 23 deletions
diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 1781efeb55e..a640f1c369a 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -637,12 +637,11 @@ s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data) **/ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) { - struct e1000_phy_info *phy = &hw->phy; s32 ret_val; u16 phy_data; /* Enable CRS on TX. This must be set for half-duplex operation. */ - ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data); + ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data); if (ret_val) goto out; @@ -651,7 +650,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) /* Enable downshift */ phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; - ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data); + ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data); out: return ret_val; @@ -774,16 +773,14 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) } if (phy->type == e1000_phy_82578) { - ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - &phy_data); + ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); if (ret_val) return ret_val; /* 82578 PHY - set the downshift count to 1x. */ phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE; phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK; - ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - phy_data); + ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); if (ret_val) return ret_val; } @@ -1319,9 +1316,8 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) * We didn't get link. * Reset the DSP and cross our fingers. */ - ret_val = e1e_wphy(hw, - M88E1000_PHY_PAGE_SELECT, - 0x001d); + ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT, + 0x001d); if (ret_val) return ret_val; ret_val = e1000e_phy_reset_dsp(hw); @@ -3071,12 +3067,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) goto out; /* Do not apply workaround if in PHY loopback bit 14 set */ - hw->phy.ops.read_reg(hw, PHY_CONTROL, &data); + e1e_rphy(hw, PHY_CONTROL, &data); if (data & PHY_CONTROL_LB) goto out; /* check if link is up and at 1Gbps */ - ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data); + ret_val = e1e_rphy(hw, BM_CS_STATUS, &data); if (ret_val) goto out; @@ -3092,14 +3088,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) mdelay(200); /* flush the packets in the fifo buffer */ - ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL, - HV_MUX_DATA_CTRL_GEN_TO_MAC | - HV_MUX_DATA_CTRL_FORCE_SPEED); + ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC | + HV_MUX_DATA_CTRL_FORCE_SPEED); if (ret_val) goto out; - ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL, - HV_MUX_DATA_CTRL_GEN_TO_MAC); + ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC); out: return ret_val; @@ -3119,7 +3113,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw) s32 ret_val; u16 data; - ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data); if (!ret_val) phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY) @@ -3142,13 +3136,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); + ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); if (ret_val) goto out; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); + ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); if (ret_val) goto out; @@ -3212,7 +3206,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) goto out; - ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); + ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data); if (ret_val) goto out; @@ -3224,7 +3218,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) goto out; - ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); + ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data); if (ret_val) goto out; @@ -3258,7 +3252,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw) s32 ret_val; u16 phy_data, length; - ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); + ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data); if (ret_val) goto out; |