summaryrefslogtreecommitdiffstats
path: root/drivers/net/e1000e
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/e1000e')
-rw-r--r--drivers/net/e1000e/82571.c144
-rw-r--r--drivers/net/e1000e/defines.h1
-rw-r--r--drivers/net/e1000e/e1000.h2
-rw-r--r--drivers/net/e1000e/ethtool.c2
-rw-r--r--drivers/net/e1000e/hw.h8
-rw-r--r--drivers/net/e1000e/lib.c4
-rw-r--r--drivers/net/e1000e/netdev.c99
7 files changed, 201 insertions, 59 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c
index 0890162953e..565fd4e8f95 100644
--- a/drivers/net/e1000e/82571.c
+++ b/drivers/net/e1000e/82571.c
@@ -61,6 +61,7 @@
static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
u16 words, u16 *data);
static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
@@ -250,7 +251,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
case e1000_media_type_internal_serdes:
func->setup_physical_interface =
e1000_setup_fiber_serdes_link_82571;
- func->check_for_link = e1000e_check_for_serdes_link;
+ func->check_for_link = e1000_check_for_serdes_link_82571;
func->get_link_up_info =
e1000e_get_speed_and_duplex_fiber_serdes;
break;
@@ -830,6 +831,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
hw->dev_spec.e82571.alt_mac_addr_is_present)
e1000e_set_laa_state_82571(hw, true);
+ /* Reinitialize the 82571 serdes link state machine */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
+ hw->mac.serdes_link_state = e1000_serdes_link_down;
+
return 0;
}
@@ -980,6 +985,18 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
reg |= E1000_PBA_ECC_CORR_EN;
ew32(PBA_ECC, reg);
}
+ /*
+ * Workaround for hardware errata.
+ * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
+ */
+
+ if ((hw->mac.type == e1000_82571) ||
+ (hw->mac.type == e1000_82572)) {
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, reg);
+ }
+
/* PCI-Ex Control Registers */
if (hw->mac.type == e1000_82574) {
@@ -1203,6 +1220,131 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
}
/**
+ * e1000_check_for_serdes_link_82571 - Check for link (Serdes)
+ * @hw: pointer to the HW structure
+ *
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ **/
+s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ s32 ret_val = 0;
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ rxcw = er32(RXCW);
+
+ if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
+
+ /* Receiver is synchronized with no invalid bits. */
+ switch (mac->serdes_link_state) {
+ case e1000_serdes_link_autoneg_complete:
+ if (!(status & E1000_STATUS_LU)) {
+ /*
+ * We have lost link, retry autoneg before
+ * reporting link failure
+ */
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ hw_dbg(hw, "AN_UP -> AN_PROG\n");
+ }
+ break;
+
+ case e1000_serdes_link_forced_up:
+ /*
+ * If we are receiving /C/ ordered sets, re-enable
+ * auto-negotiation in the TXCW register and disable
+ * forced link in the Device Control register in an
+ * attempt to auto-negotiate with our link partner.
+ */
+ if (rxcw & E1000_RXCW_C) {
+ /* Enable autoneg, and unforce link up */
+ ew32(TXCW, mac->txcw);
+ ew32(CTRL,
+ (ctrl & ~E1000_CTRL_SLU));
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ hw_dbg(hw, "FORCED_UP -> AN_PROG\n");
+ }
+ break;
+
+ case e1000_serdes_link_autoneg_progress:
+ /*
+ * If the LU bit is set in the STATUS register,
+ * autoneg has completed sucessfully. If not,
+ * try foring the link because the far end may be
+ * available but not capable of autonegotiation.
+ */
+ if (status & E1000_STATUS_LU) {
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_complete;
+ hw_dbg(hw, "AN_PROG -> AN_UP\n");
+ } else {
+ /*
+ * Disable autoneg, force link up and
+ * full duplex, and change state to forced
+ */
+ ew32(TXCW,
+ (mac->txcw & ~E1000_TXCW_ANE));
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after link up. */
+ ret_val =
+ e1000e_config_fc_after_link_up(hw);
+ if (ret_val) {
+ hw_dbg(hw, "Error config flow control\n");
+ break;
+ }
+ mac->serdes_link_state =
+ e1000_serdes_link_forced_up;
+ hw_dbg(hw, "AN_PROG -> FORCED_UP\n");
+ }
+ mac->serdes_has_link = true;
+ break;
+
+ case e1000_serdes_link_down:
+ default:
+ /* The link was down but the receiver has now gained
+ * valid sync, so lets see if we can bring the link
+ * up. */
+ ew32(TXCW, mac->txcw);
+ ew32(CTRL,
+ (ctrl & ~E1000_CTRL_SLU));
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ hw_dbg(hw, "DOWN -> AN_PROG\n");
+ break;
+ }
+ } else {
+ if (!(rxcw & E1000_RXCW_SYNCH)) {
+ mac->serdes_has_link = false;
+ mac->serdes_link_state = e1000_serdes_link_down;
+ hw_dbg(hw, "ANYSTATE -> DOWN\n");
+ } else {
+ /*
+ * We have sync, and can tolerate one
+ * invalid (IV) codeword before declaring
+ * link down, so reread to look again
+ */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_IV) {
+ mac->serdes_link_state = e1000_serdes_link_down;
+ mac->serdes_has_link = false;
+ hw_dbg(hw, "ANYSTATE -> DOWN\n");
+ }
+ }
+ }
+
+ return ret_val;
+}
+
+/**
* e1000_valid_led_default_82571 - Verify a valid default LED config
* @hw: pointer to the HW structure
* @data: pointer to the NVM (EEPROM)
diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h
index e6caf29d425..243aa499fe9 100644
--- a/drivers/net/e1000e/defines.h
+++ b/drivers/net/e1000e/defines.h
@@ -69,6 +69,7 @@
#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */
#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
#define E1000_CTRL_EXT_EIAME 0x01000000
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 37bcb190eef..28bf9a51346 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -195,8 +195,6 @@ struct e1000_adapter {
u16 link_duplex;
u16 eeprom_vers;
- spinlock_t tx_queue_lock; /* prevent concurrent tail updates */
-
/* track device up/down/testing state */
unsigned long state;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index e48956d924b..2557aeef65e 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1589,7 +1589,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
*data = 0;
if (hw->phy.media_type == e1000_media_type_internal_serdes) {
int i = 0;
- hw->mac.serdes_has_link = 0;
+ hw->mac.serdes_has_link = false;
/*
* On some blade server designs, link establishment
diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h
index 2d4ce0492df..5cb428c2811 100644
--- a/drivers/net/e1000e/hw.h
+++ b/drivers/net/e1000e/hw.h
@@ -459,6 +459,13 @@ enum e1000_smart_speed {
e1000_smart_speed_off
};
+enum e1000_serdes_link_state {
+ e1000_serdes_link_down = 0,
+ e1000_serdes_link_autoneg_progress,
+ e1000_serdes_link_autoneg_complete,
+ e1000_serdes_link_forced_up
+};
+
/* Receive Descriptor */
struct e1000_rx_desc {
__le64 buffer_addr; /* Address of the descriptor's data buffer */
@@ -787,6 +794,7 @@ struct e1000_mac_info {
bool in_ifs_mode;
bool serdes_has_link;
bool tx_pkt_filtering;
+ enum e1000_serdes_link_state serdes_link_state;
};
struct e1000_phy_info {
diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c
index 66741104ffd..ac2f34e1836 100644
--- a/drivers/net/e1000e/lib.c
+++ b/drivers/net/e1000e/lib.c
@@ -501,7 +501,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
ew32(TXCW, mac->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
- mac->serdes_has_link = 1;
+ mac->serdes_has_link = true;
}
return 0;
@@ -566,7 +566,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
ew32(TXCW, mac->txcw);
ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
- mac->serdes_has_link = 1;
+ mac->serdes_has_link = true;
} else if (!(E1000_TXCW_ANE & er32(TXCW))) {
/*
* If we force link for non-auto-negotiation switch, check
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 91817d0afca..04e007dcf47 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -44,10 +44,11 @@
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/pm_qos_params.h>
+#include <linux/aer.h>
#include "e1000.h"
-#define DRV_VERSION "0.3.3.3-k6"
+#define DRV_VERSION "0.3.3.4-k2"
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@@ -99,8 +100,8 @@ static void e1000_receive_skb(struct e1000_adapter *adapter,
skb->protocol = eth_type_trans(skb, netdev);
if (adapter->vlgrp && (status & E1000_RXD_STAT_VP))
- vlan_hwaccel_receive_skb(skb, adapter->vlgrp,
- le16_to_cpu(vlan));
+ vlan_gro_receive(&adapter->napi, adapter->vlgrp,
+ le16_to_cpu(vlan), skb);
else
napi_gro_receive(&adapter->napi, skb);
}
@@ -1152,7 +1153,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
* read ICR disables interrupts using IAM
*/
- if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ if (icr & E1000_ICR_LSC) {
hw->mac.get_link_status = 1;
/*
* ICH8 workaround-- Call gig speed drop workaround on cable
@@ -1179,12 +1180,12 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
- if (netif_rx_schedule_prep(&adapter->napi)) {
+ if (napi_schedule_prep(&adapter->napi)) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
- __netif_rx_schedule(&adapter->napi);
+ __napi_schedule(&adapter->napi);
}
return IRQ_HANDLED;
@@ -1218,7 +1219,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
* IMC write
*/
- if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ if (icr & E1000_ICR_LSC) {
hw->mac.get_link_status = 1;
/*
* ICH8 workaround-- Call gig speed drop workaround on cable
@@ -1246,12 +1247,12 @@ static irqreturn_t e1000_intr(int irq, void *data)
mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
- if (netif_rx_schedule_prep(&adapter->napi)) {
+ if (napi_schedule_prep(&adapter->napi)) {
adapter->total_tx_bytes = 0;
adapter->total_tx_packets = 0;
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
- __netif_rx_schedule(&adapter->napi);
+ __napi_schedule(&adapter->napi);
}
return IRQ_HANDLED;
@@ -1320,10 +1321,10 @@ static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
adapter->rx_ring->set_itr = 0;
}
- if (netif_rx_schedule_prep(&adapter->napi)) {
+ if (napi_schedule_prep(&adapter->napi)) {
adapter->total_rx_bytes = 0;
adapter->total_rx_packets = 0;
- __netif_rx_schedule(&adapter->napi);
+ __napi_schedule(&adapter->napi);
}
return IRQ_HANDLED;
}
@@ -1698,7 +1699,6 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
tx_ring->next_to_use = 0;
tx_ring->next_to_clean = 0;
- spin_lock_init(&adapter->tx_queue_lock);
return 0;
err:
@@ -2007,16 +2007,7 @@ static int e1000_clean(struct napi_struct *napi, int budget)
!(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
goto clean_rx;
- /*
- * e1000_clean is called per-cpu. This lock protects
- * tx_ring from being cleaned by multiple cpus
- * simultaneously. A failure obtaining the lock means
- * tx_ring is currently being cleaned anyway.
- */
- if (spin_trylock(&adapter->tx_queue_lock)) {
- tx_cleaned = e1000_clean_tx_irq(adapter);
- spin_unlock(&adapter->tx_queue_lock);
- }
+ tx_cleaned = e1000_clean_tx_irq(adapter);
clean_rx:
adapter->clean_rx(adapter, &work_done, budget);
@@ -2028,7 +2019,7 @@ clean_rx:
if (work_done < budget) {
if (adapter->itr_setting & 3)
e1000_set_itr(adapter);
- netif_rx_complete(napi);
+ napi_complete(napi);
if (adapter->msix_entries)
ew32(IMS, adapter->rx_ring->ims_val);
else
@@ -2922,8 +2913,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
if (e1000_alloc_queues(adapter))
return -ENOMEM;
- spin_lock_init(&adapter->tx_queue_lock);
-
/* Explicitly disable IRQ since the NIC can be in any state. */
e1000_irq_disable(adapter);
@@ -3782,11 +3771,11 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
return 0;
switch (skb->protocol) {
- case __constant_htons(ETH_P_IP):
+ case cpu_to_be16(ETH_P_IP):
if (ip_hdr(skb)->protocol == IPPROTO_TCP)
cmd_len |= E1000_TXD_CMD_TCP;
break;
- case __constant_htons(ETH_P_IPV6):
+ case cpu_to_be16(ETH_P_IPV6):
/* XXX not handling all IPV6 headers */
if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
cmd_len |= E1000_TXD_CMD_TCP;
@@ -4069,7 +4058,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
unsigned int tx_flags = 0;
unsigned int len = skb->len - skb->data_len;
- unsigned long irq_flags;
unsigned int nr_frags;
unsigned int mss;
int count = 0;
@@ -4138,18 +4126,12 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if (adapter->hw.mac.tx_pkt_filtering)
e1000_transfer_dhcp_info(adapter, skb);
- if (!spin_trylock_irqsave(&adapter->tx_queue_lock, irq_flags))
- /* Collision - tell upper layer to requeue */
- return NETDEV_TX_LOCKED;
-
/*
* need: count + 2 desc gap to keep tail from touching
* head, otherwise try next time
*/
- if (e1000_maybe_stop_tx(netdev, count + 2)) {
- spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
+ if (e1000_maybe_stop_tx(netdev, count + 2))
return NETDEV_TX_BUSY;
- }
if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
tx_flags |= E1000_TX_FLAGS_VLAN;
@@ -4161,7 +4143,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
tso = e1000_tso(adapter, skb);
if (tso < 0) {
dev_kfree_skb_any(skb);
- spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
return NETDEV_TX_OK;
}
@@ -4182,7 +4163,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
if (count < 0) {
/* handle pci_map_single() error in e1000_tx_map */
dev_kfree_skb_any(skb);
- spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
return NETDEV_TX_OK;
}
@@ -4193,7 +4173,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
/* Make sure there is space in the ring for the next send. */
e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
- spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags);
return NETDEV_TX_OK;
}
@@ -4543,6 +4522,14 @@ static int e1000_resume(struct pci_dev *pdev)
return err;
}
+ /* AER (Advanced Error Reporting) hooks */
+ err = pci_enable_pcie_error_reporting(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed "
+ "0x%x\n", err);
+ /* non-fatal, continue */
+ }
+
pci_set_master(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
@@ -4637,24 +4624,29 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
int err;
+ pci_ers_result_t result;
e1000e_disable_l1aspm(pdev);
err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
- pci_set_master(pdev);
- pci_restore_state(pdev);
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
- e1000e_reset(adapter);
- ew32(WUS, ~0);
+ e1000e_reset(adapter);
+ ew32(WUS, ~0);
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ pci_cleanup_aer_uncorrect_error_status(pdev);
- return PCI_ERS_RESULT_RECOVERED;
+ return result;
}
/**
@@ -4922,12 +4914,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
- /*
- * We should not be using LLTX anymore, but we are still Tx faster with
- * it.
- */
- netdev->features |= NETIF_F_LLTX;
-
if (e1000e_enable_mng_pass_thru(&adapter->hw))
adapter->flags |= FLAG_MNG_PT_ENABLED;
@@ -5091,6 +5077,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
+ int err;
/*
* flush_scheduled work may reschedule our watchdog task, so
@@ -5125,6 +5112,12 @@ static void __devexit e1000_remove(struct pci_dev *pdev)
free_netdev(netdev);
+ /* AER disable */
+ err = pci_disable_pcie_error_reporting(pdev);
+ if (err)
+ dev_err(&pdev->dev,
+ "pci_disable_pcie_error_reporting failed 0x%x\n", err);
+
pci_disable_device(pdev);
}
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-10-10 21:33:46 +0000