diff options
Diffstat (limited to 'drivers/net/e1000e')
| -rw-r--r-- | drivers/net/e1000e/82571.c | 323 | ||||
| -rw-r--r-- | drivers/net/e1000e/defines.h | 2 | ||||
| -rw-r--r-- | drivers/net/e1000e/e1000.h | 49 | ||||
| -rw-r--r-- | drivers/net/e1000e/es2lan.c | 213 | ||||
| -rw-r--r-- | drivers/net/e1000e/ethtool.c | 93 | ||||
| -rw-r--r-- | drivers/net/e1000e/hw.h | 52 | ||||
| -rw-r--r-- | drivers/net/e1000e/ich8lan.c | 534 | ||||
| -rw-r--r-- | drivers/net/e1000e/lib.c | 261 | ||||
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 520 | ||||
| -rw-r--r-- | drivers/net/e1000e/param.c | 2 | ||||
| -rw-r--r-- | drivers/net/e1000e/phy.c | 580 |
11 files changed, 1407 insertions, 1222 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index d1e0563a67d..c1a42cfc80b 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -43,10 +43,6 @@ * 82583V Gigabit Network Connection */ -#include <linux/netdevice.h> -#include <linux/delay.h> -#include <linux/pci.h> - #include "e1000.h" #define ID_LED_RESERVED_F746 0xF746 @@ -69,15 +65,15 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw); static s32 e1000_setup_link_82571(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw); +static void e1000_clear_vfta_82571(struct e1000_hw *hw); static bool e1000_check_mng_mode_82574(struct e1000_hw *hw); static s32 e1000_led_on_82574(struct e1000_hw *hw); static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw); +static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw); /** * e1000_init_phy_params_82571 - Init PHY func ptrs. * @hw: pointer to the HW structure - * - * This is a function pointer entry point called by the api module. **/ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) { @@ -93,6 +89,9 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->reset_delay_us = 100; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_82571; + switch (hw->mac.type) { case e1000_82571: case e1000_82572: @@ -140,8 +139,6 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) /** * e1000_init_nvm_params_82571 - Init NVM func ptrs. * @hw: pointer to the HW structure - * - * This is a function pointer entry point called by the api module. **/ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) { @@ -205,8 +202,6 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) /** * e1000_init_mac_params_82571 - Init MAC func ptrs. * @hw: pointer to the HW structure - * - * This is a function pointer entry point called by the api module. **/ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) { @@ -240,7 +235,8 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; + mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; /* check for link */ switch (hw->phy.media_type) { @@ -313,7 +309,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) * indicates that the bootagent or EFI code has * improperly left this bit enabled */ - hw_dbg(hw, "Please update your 82571 Bootagent\n"); + e_dbg("Please update your 82571 Bootagent\n"); } ew32(SWSM, swsm & ~E1000_SWSM_SMBI); } @@ -487,7 +483,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) } if (i == sw_timeout) { - hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + e_dbg("Driver can't access device - SMBI bit is set.\n"); hw->dev_spec.e82571.smb_counter++; } /* Get the FW semaphore. */ @@ -505,7 +501,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw) if (i == fw_timeout) { /* Release semaphores */ e1000_put_hw_semaphore_82571(hw); - hw_dbg(hw, "Driver can't access the NVM\n"); + e_dbg("Driver can't access the NVM\n"); return -E1000_ERR_NVM; } @@ -702,8 +698,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; - u32 i; - u32 eewr = 0; + u32 i, eewr = 0; s32 ret_val = 0; /* @@ -712,7 +707,7 @@ static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -753,7 +748,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) timeout--; } if (!timeout) { - hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + e_dbg("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; } @@ -763,7 +758,7 @@ static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw) /** * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state * @hw: pointer to the HW structure - * @active: TRUE to enable LPLU, FALSE to disable + * @active: true to enable LPLU, false to disable * * Sets the LPLU D0 state according to the active flag. When activating LPLU * this function also disables smart speed and vice versa. LPLU will not be @@ -834,15 +829,11 @@ static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active) * e1000_reset_hw_82571 - Reset hardware * @hw: pointer to the HW structure * - * This resets the hardware into a known state. This is a - * function pointer entry point called by the api module. + * This resets the hardware into a known state. **/ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) { - u32 ctrl; - u32 extcnf_ctrl; - u32 ctrl_ext; - u32 icr; + u32 ctrl, extcnf_ctrl, ctrl_ext, icr; s32 ret_val; u16 i = 0; @@ -852,9 +843,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); ew32(RCTL, 0); @@ -893,7 +884,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) ctrl = er32(CTRL); - hw_dbg(hw, "Issuing a global reset to MAC\n"); + e_dbg("Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); if (hw->nvm.type == e1000_nvm_flash_hw) { @@ -951,21 +942,19 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) struct e1000_mac_info *mac = &hw->mac; u32 reg_data; s32 ret_val; - u16 i; - u16 rar_count = mac->rar_entry_count; + u16 i, rar_count = mac->rar_entry_count; e1000_initialize_hw_bits_82571(hw); /* Initialize identification LED */ ret_val = e1000e_id_led_init(hw); - if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); - return ret_val; - } + if (ret_val) + e_dbg("Error initializing identification LED\n"); + /* This is not fatal and we should not stop init due to this */ /* Disabling VLAN filtering */ - hw_dbg(hw, "Initializing the IEEE VLAN\n"); - e1000e_clear_vfta(hw); + e_dbg("Initializing the IEEE VLAN\n"); + mac->ops.clear_vfta(hw); /* Setup the receive address. */ /* @@ -978,7 +967,7 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) e1000e_init_rx_addrs(hw, rar_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -1125,6 +1114,13 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg |= (1 << 22); ew32(GCR, reg); + /* + * Workaround for hardware errata. + * apply workaround for hardware errata documented in errata + * docs Fixes issue where some error prone or unreliable PCIe + * completions are occurring, particularly with ASPM enabled. + * Without fix, issue can cause tx timeouts. + */ reg = er32(GCR2); reg |= 1; ew32(GCR2, reg); @@ -1137,13 +1133,13 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) } /** - * e1000e_clear_vfta - Clear VLAN filter table + * e1000_clear_vfta_82571 - Clear VLAN filter table * @hw: pointer to the HW structure * * Clears the register array which contains the VLAN filter table by * setting all the values to 0. **/ -void e1000e_clear_vfta(struct e1000_hw *hw) +static void e1000_clear_vfta_82571(struct e1000_hw *hw) { u32 offset; u32 vfta_value = 0; @@ -1360,8 +1356,20 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) * e1000_check_for_serdes_link_82571 - Check for link (Serdes) * @hw: pointer to the HW structure * - * Checks for link up on the hardware. If link is not up and we have - * a signal, then we need to force link up. + * Reports the link state as up or down. + * + * If autonegotiation is supported by the link partner, the link state is + * determined by the result of autonegotiation. This is the most likely case. + * If autonegotiation is not supported by the link partner, and the link + * has a valid signal, force the link up. + * + * The link state is represented internally here by 4 states: + * + * 1) down + * 2) autoneg_progress + * 3) autoneg_complete (the link sucessfully autonegotiated) + * 4) forced_up (the link has been forced up, it did not autonegotiate) + * **/ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) { @@ -1387,7 +1395,8 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) */ mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "AN_UP -> AN_PROG\n"); + mac->serdes_has_link = false; + e_dbg("AN_UP -> AN_PROG\n"); } break; @@ -1401,79 +1410,86 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) if (rxcw & E1000_RXCW_C) { /* Enable autoneg, and unforce link up */ ew32(TXCW, mac->txcw); - ew32(CTRL, - (ctrl & ~E1000_CTRL_SLU)); + ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "FORCED_UP -> AN_PROG\n"); + mac->serdes_has_link = false; + e_dbg("FORCED_UP -> AN_PROG\n"); } break; case e1000_serdes_link_autoneg_progress: - /* - * If the LU bit is set in the STATUS register, - * autoneg has completed sucessfully. If not, - * try foring the link because the far end may be - * available but not capable of autonegotiation. - */ - if (status & E1000_STATUS_LU) { - mac->serdes_link_state = - e1000_serdes_link_autoneg_complete; - hw_dbg(hw, "AN_PROG -> AN_UP\n"); + if (rxcw & E1000_RXCW_C) { + /* + * We received /C/ ordered sets, meaning the + * link partner has autonegotiated, and we can + * trust the Link Up (LU) status bit. + */ + if (status & E1000_STATUS_LU) { + mac->serdes_link_state = + e1000_serdes_link_autoneg_complete; + e_dbg("AN_PROG -> AN_UP\n"); + mac->serdes_has_link = true; + } else { + /* Autoneg completed, but failed. */ + mac->serdes_link_state = + e1000_serdes_link_down; + e_dbg("AN_PROG -> DOWN\n"); + } } else { /* - * Disable autoneg, force link up and - * full duplex, and change state to forced + * The link partner did not autoneg. + * Force link up and full duplex, and change + * state to forced. */ - ew32(TXCW, - (mac->txcw & ~E1000_TXCW_ANE)); + ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); ew32(CTRL, ctrl); /* Configure Flow Control after link up. */ - ret_val = - e1000e_config_fc_after_link_up(hw); + ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error config flow control\n"); + e_dbg("Error config flow control\n"); break; } mac->serdes_link_state = e1000_serdes_link_forced_up; - hw_dbg(hw, "AN_PROG -> FORCED_UP\n"); + mac->serdes_has_link = true; + e_dbg("AN_PROG -> FORCED_UP\n"); } - mac->serdes_has_link = true; break; case e1000_serdes_link_down: default: - /* The link was down but the receiver has now gained + /* + * The link was down but the receiver has now gained * valid sync, so lets see if we can bring the link - * up. */ + * up. + */ ew32(TXCW, mac->txcw); - ew32(CTRL, - (ctrl & ~E1000_CTRL_SLU)); + ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); mac->serdes_link_state = e1000_serdes_link_autoneg_progress; - hw_dbg(hw, "DOWN -> AN_PROG\n"); + e_dbg("DOWN -> AN_PROG\n"); break; } } else { if (!(rxcw & E1000_RXCW_SYNCH)) { mac->serdes_has_link = false; mac->serdes_link_state = e1000_serdes_link_down; - hw_dbg(hw, "ANYSTATE -> DOWN\n"); + e_dbg("ANYSTATE -> DOWN\n"); } else { /* - * We have sync, and can tolerate one - * invalid (IV) codeword before declaring - * link down, so reread to look again + * We have sync, and can tolerate one invalid (IV) + * codeword before declaring link down, so reread + * to look again. */ udelay(10); rxcw = er32(RXCW); if (rxcw & E1000_RXCW_IV) { mac->serdes_link_state = e1000_serdes_link_down; mac->serdes_has_link = false; - hw_dbg(hw, "ANYSTATE -> DOWN\n"); + e_dbg("ANYSTATE -> DOWN\n"); } } } @@ -1495,7 +1511,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -1525,7 +1541,7 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) bool e1000e_get_laa_state_82571(struct e1000_hw *hw) { if (hw->mac.type != e1000_82571) - return 0; + return false; return hw->dev_spec.e82571.laa_is_present; } @@ -1535,7 +1551,7 @@ bool e1000e_get_laa_state_82571(struct e1000_hw *hw) * @hw: pointer to the HW structure * @state: enable/disable locally administered address * - * Enable/Disable the current locally administers address state. + * Enable/Disable the current locally administered address state. **/ void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state) { @@ -1609,6 +1625,28 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) } /** + * e1000_power_down_phy_copper_82571 - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + struct e1000_mac_info *mac = &hw->mac; + + if (!(phy->ops.check_reset_block)) + return; + + /* If the management interface is not enabled, then power down */ + if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + +/** * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters * @hw: pointer to the HW structure * @@ -1616,44 +1654,42 @@ static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw) **/ static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw) { - u32 temp; - e1000e_clear_hw_cntrs_base(hw); - temp = er32(PRC64); - temp = er32(PRC127); - temp = er32(PRC255); - temp = er32(PRC511); - temp = er32(PRC1023); - temp = er32(PRC1522); - temp = er32(PTC64); - temp = er32(PTC127); - temp = er32(PTC255); - temp = er32(PTC511); - temp = er32(PTC1023); - temp = er32(PTC1522); - - temp = er32(ALGNERRC); - temp = er32(RXERRC); - temp = er32(TNCRS); - temp = er32(CEXTERR); - temp = er32(TSCTC); - temp = er32(TSCTFC); - - temp = er32(MGTPRC); - temp = er32(MGTPDC); - temp = er32(MGTPTC); - - temp = er32(IAC); - temp = er32(ICRXOC); - - temp = er32(ICRXPTC); - temp = er32(ICRXATC); - temp = er32(ICTXPTC); - temp = er32(ICTXATC); - temp = er32(ICTXQEC); - temp = er32(ICTXQMTC); - temp = er32(ICRXDMTC); + er32(PRC64); + er32(PRC127); + er32(PRC255); + er32(PRC511); + er32(PRC1023); + er32(PRC1522); + er32(PTC64); + er32(PTC127); + er32(PTC255); + er32(PTC511); + er32(PTC1023); + er32(PTC1522); + + er32(ALGNERRC); + er32(RXERRC); + er32(TNCRS); + er32(CEXTERR); + er32(TSCTC); + er32(TSCTFC); + + er32(MGTPRC); + er32(MGTPDC); + er32(MGTPTC); + + er32(IAC); + er32(ICRXOC); + + er32(ICRXPTC); + er32(ICRXATC); + er32(ICTXPTC); + er32(ICTXATC); + er32(ICTXQEC); + er32(ICTXQMTC); + er32(ICRXDMTC); } static struct e1000_mac_operations e82571_mac_ops = { @@ -1667,6 +1703,8 @@ static struct e1000_mac_operations e82571_mac_ops = { /* .led_on: mac type dependent */ .led_off = e1000e_led_off_generic, .update_mc_addr_list = e1000_update_mc_addr_list_82571, + .write_vfta = e1000_write_vfta_generic, + .clear_vfta = e1000_clear_vfta_82571, .reset_hw = e1000_reset_hw_82571, .init_hw = e1000_init_hw_82571, .setup_link = e1000_setup_link_82571, @@ -1675,64 +1713,67 @@ static struct e1000_mac_operations e82571_mac_ops = { }; static struct e1000_phy_operations e82_phy_ops_igp = { - .acquire_phy = e1000_get_hw_semaphore_82571, + .acquire = e1000_get_hw_semaphore_82571, + .check_polarity = e1000_check_polarity_igp, .check_reset_block = e1000e_check_reset_block_generic, - .commit_phy = NULL, + .commit = NULL, .force_speed_duplex = e1000e_phy_force_speed_duplex_igp, .get_cfg_done = e1000_get_cfg_done_82571, .get_cable_length = e1000e_get_cable_length_igp_2, - .get_phy_info = e1000e_get_phy_info_igp, - .read_phy_reg = e1000e_read_phy_reg_igp, - .release_phy = e1000_put_hw_semaphore_82571, - .reset_phy = e1000e_phy_hw_reset_generic, + .get_info = e1000e_get_phy_info_igp, + .read_reg = e1000e_read_phy_reg_igp, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_phy_reg = e1000e_write_phy_reg_igp, + .write_reg = e1000e_write_phy_reg_igp, .cfg_on_link_up = NULL, }; static struct e1000_phy_operations e82_phy_ops_m88 = { - .acquire_phy = e1000_get_hw_semaphore_82571, + .acquire = e1000_get_hw_semaphore_82571, + .check_polarity = e1000_check_polarity_m88, .check_reset_block = e1000e_check_reset_block_generic, - .commit_phy = e1000e_phy_sw_reset, + .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, .get_cfg_done = e1000e_get_cfg_done, .get_cable_length = e1000e_get_cable_length_m88, - .get_phy_info = e1000e_get_phy_info_m88, - .read_phy_reg = e1000e_read_phy_reg_m88, - .release_phy = e1000_put_hw_semaphore_82571, - .reset_phy = e1000e_phy_hw_reset_generic, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000e_read_phy_reg_m88, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_phy_reg = e1000e_write_phy_reg_m88, + .write_reg = e1000e_write_phy_reg_m88, .cfg_on_link_up = NULL, }; static struct e1000_phy_operations e82_phy_ops_bm = { - .acquire_phy = e1000_get_hw_semaphore_82571, + .acquire = e1000_get_hw_semaphore_82571, + .check_polarity = e1000_check_polarity_m88, .check_reset_block = e1000e_check_reset_block_generic, - .commit_phy = e1000e_phy_sw_reset, + .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000e_phy_force_speed_duplex_m88, .get_cfg_done = e1000e_get_cfg_done, .get_cable_length = e1000e_get_cable_length_m88, - .get_phy_info = e1000e_get_phy_info_m88, - .read_phy_reg = e1000e_read_phy_reg_bm2, - .release_phy = e1000_put_hw_semaphore_82571, - .reset_phy = e1000e_phy_hw_reset_generic, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000e_read_phy_reg_bm2, + .release = e1000_put_hw_semaphore_82571, + .reset = e1000e_phy_hw_reset_generic, .set_d0_lplu_state = e1000_set_d0_lplu_state_82571, .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_phy_reg = e1000e_write_phy_reg_bm2, + .write_reg = e1000e_write_phy_reg_bm2, .cfg_on_link_up = NULL, }; static struct e1000_nvm_operations e82571_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_82571, - .read_nvm = e1000e_read_nvm_eerd, - .release_nvm = e1000_release_nvm_82571, - .update_nvm = e1000_update_nvm_checksum_82571, + .acquire = e1000_acquire_nvm_82571, + .read = e1000e_read_nvm_eerd, + .release = e1000_release_nvm_82571, + .update = e1000_update_nvm_checksum_82571, .valid_led_default = e1000_valid_led_default_82571, - .validate_nvm = e1000_validate_nvm_checksum_82571, - .write_nvm = e1000_write_nvm_82571, + .validate = e1000_validate_nvm_checksum_82571, + .write = e1000_write_nvm_82571, }; struct e1000_info e1000_82571_info = { diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index 1190167a8b3..86d2809763c 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 189dfa2d6c7..cebbd9079d5 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -36,6 +36,7 @@ #include <linux/workqueue.h> #include <linux/io.h> #include <linux/netdevice.h> +#include <linux/pci.h> #include "hw.h" @@ -47,9 +48,9 @@ struct e1000_info; #ifdef DEBUG #define e_dbg(format, arg...) \ - e_printk(KERN_DEBUG , adapter, format, ## arg) + e_printk(KERN_DEBUG , hw->adapter, format, ## arg) #else -#define e_dbg(format, arg...) do { (void)(adapter); } while (0) +#define e_dbg(format, arg...) do { (void)(hw); } while (0) #endif #define e_err(format, arg...) \ @@ -141,6 +142,8 @@ struct e1000_info; #define HV_TNCRS_UPPER PHY_REG(778, 29) /* Transmit with no CRS */ #define HV_TNCRS_LOWER PHY_REG(778, 30) +#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */ + /* BM PHY Copper Specific Status */ #define BM_CS_STATUS 17 #define BM_CS_STATUS_LINK_UP 0x0400 @@ -191,12 +194,15 @@ struct e1000_buffer { unsigned long time_stamp; u16 length; u16 next_to_watch; + u16 mapped_as_page; }; /* Rx */ - /* arrays of page information for packet split */ - struct e1000_ps_page *ps_pages; + struct { + /* arrays of page information for packet split */ + struct e1000_ps_page *ps_pages; + struct page *page; + }; }; - struct page *page; }; struct e1000_ring { @@ -329,7 +335,6 @@ struct e1000_adapter { /* OS defined structs */ struct net_device *netdev; struct pci_dev *pdev; - struct net_device_stats net_stats; /* structs defined in e1000_hw.h */ struct e1000_hw hw; @@ -364,6 +369,7 @@ struct e1000_adapter { struct work_struct downshift_task; struct work_struct update_phy_task; struct work_struct led_blink_task; + struct work_struct print_hang_task; }; struct e1000_info { @@ -486,6 +492,7 @@ extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw); extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw); extern void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw); +extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw); extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw); @@ -505,7 +512,7 @@ extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw); extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw); extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw); extern s32 e1000e_setup_link(struct e1000_hw *hw); -extern void e1000e_clear_vfta(struct e1000_hw *hw); +extern void e1000_clear_vfta_generic(struct e1000_hw *hw); extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count); extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, u8 *mc_addr_list, @@ -521,7 +528,7 @@ extern void e1000e_config_collision_dist(struct e1000_hw *hw); extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw); extern s32 e1000e_force_mac_fc(struct e1000_hw *hw); extern s32 e1000e_blink_led(struct e1000_hw *hw); -extern void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); +extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value); extern void e1000e_reset_adaptive(struct e1000_hw *hw); extern void e1000e_update_adaptive(struct e1000_hw *hw); @@ -564,6 +571,8 @@ extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, u32 usec_interval, bool *success); extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw); +extern void e1000_power_up_phy_copper(struct e1000_hw *hw); +extern void e1000_power_down_phy_copper(struct e1000_hw *hw); extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data); extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data); extern s32 e1000e_check_downshift(struct e1000_hw *hw); @@ -581,9 +590,15 @@ extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw); extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw); extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw); +extern s32 e1000_check_polarity_m88(struct e1000_hw *hw); +extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw); +extern s32 e1000_check_polarity_ife(struct e1000_hw *hw); +extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw); +extern s32 e1000_check_polarity_igp(struct e1000_hw *hw); + static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw) { - return hw->phy.ops.reset_phy(hw); + return hw->phy.ops.reset(hw); } static inline s32 e1000_check_reset_block(struct e1000_hw *hw) @@ -593,12 +608,12 @@ static inline s32 e1000_check_reset_block(struct e1000_hw *hw) static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data) { - return hw->phy.ops.read_phy_reg(hw, offset, data); + return hw->phy.ops.read_reg(hw, offset, data); } static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data) { - return hw->phy.ops.write_phy_reg(hw, offset, data); + return hw->phy.ops.write_reg(hw, offset, data); } static inline s32 e1000_get_cable_length(struct e1000_hw *hw) @@ -618,27 +633,27 @@ extern s32 e1000e_read_mac_addr(struct e1000_hw *hw); static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw) { - return hw->nvm.ops.validate_nvm(hw); + return hw->nvm.ops.validate(hw); } static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw) { - return hw->nvm.ops.update_nvm(hw); + return hw->nvm.ops.update(hw); } static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - return hw->nvm.ops.read_nvm(hw, offset, words, data); + return hw->nvm.ops.read(hw, offset, words, data); } static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) { - return hw->nvm.ops.write_nvm(hw, offset, words, data); + return hw->nvm.ops.write(hw, offset, words, data); } static inline s32 e1000_get_phy_info(struct e1000_hw *hw) { - return hw->phy.ops.get_phy_info(hw); + return hw->phy.ops.get_info(hw); } static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw) diff --git a/drivers/net/e1000e/es2lan.c b/drivers/net/e1000e/es2lan.c index ae5d7368935..d2a10479460 100644 --- a/drivers/net/e1000e/es2lan.c +++ b/drivers/net/e1000e/es2lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -31,11 +31,6 @@ * 80003ES2LAN Gigabit Ethernet Controller (Serdes) */ -#include <linux/netdevice.h> -#include <linux/ethtool.h> -#include <linux/delay.h> -#include <linux/pci.h> - #include "e1000.h" #define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00 @@ -104,6 +99,8 @@ */ static const u16 e1000_gg82563_cable_length_table[] = { 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF }; +#define GG82563_CABLE_LENGTH_TABLE_SIZE \ + ARRAY_SIZE(e1000_gg82563_cable_length_table) static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw); static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask); @@ -117,12 +114,11 @@ static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 *data); static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, u16 data); +static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw); /** * e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs. * @hw: pointer to the HW structure - * - * This is a function pointer entry point called by the api module. **/ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw) { @@ -132,6 +128,9 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw) if (hw->phy.media_type != e1000_media_type_copper) { phy->type = e1000_phy_none; return 0; + } else { + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan; } phy->addr = 1; @@ -152,8 +151,6 @@ static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw) /** * e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs. * @hw: pointer to the HW structure - * - * This is a function pointer entry point called by the api module. **/ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw) { @@ -200,8 +197,6 @@ static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw) /** * e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs. * @hw: pointer to the HW structure - * - * This is a function pointer entry point called by the api module. **/ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter) { @@ -224,7 +219,8 @@ static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter) /* Set rar entry count */ mac->rar_entry_count = E1000_RAR_ENTRIES; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) ? 1 : 0; + mac->arc_subsystem_valid = (er32(FWSM) & E1000_FWSM_MODE_MASK) + ? true : false; /* check for link */ switch (hw->phy.media_type) { @@ -272,8 +268,7 @@ static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter) * e1000_acquire_phy_80003es2lan - Acquire rights to access PHY * @hw: pointer to the HW structure * - * A wrapper to acquire access rights to the correct PHY. This is a - * function pointer entry point called by the api module. + * A wrapper to acquire access rights to the correct PHY. **/ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw) { @@ -287,8 +282,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw) * e1000_release_phy_80003es2lan - Release rights to access PHY * @hw: pointer to the HW structure * - * A wrapper to release access rights to the correct PHY. This is a - * function pointer entry point called by the api module. + * A wrapper to release access rights to the correct PHY. **/ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw) { @@ -333,8 +327,7 @@ static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw) * e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM * @hw: pointer to the HW structure * - * Acquire the semaphore to access the EEPROM. This is a function - * pointer entry point called by the api module. + * Acquire the semaphore to access the EEPROM. **/ static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw) { @@ -356,8 +349,7 @@ static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw) * e1000_release_nvm_80003es2lan - Relinquish rights to access NVM * @hw: pointer to the HW structure * - * Release the semaphore used to access the EEPROM. This is a - * function pointer entry point called by the api module. + * Release the semaphore used to access the EEPROM. **/ static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw) { @@ -399,8 +391,7 @@ static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask) } if (i == timeout) { - hw_dbg(hw, - "Driver can't access resource, SW_FW_SYNC timeout.\n"); + e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n"); return -E1000_ERR_SWFW_SYNC; } @@ -440,8 +431,7 @@ static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask) * @offset: offset of the register to read * @data: pointer to the data returned from the operation * - * Read the GG82563 PHY register. This is a function pointer entry - * point called by the api module. + * Read the GG82563 PHY register. **/ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, u32 offset, u16 *data) @@ -505,8 +495,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, * @offset: offset of the register to read * @data: value to write to the register * - * Write to the GG82563 PHY register. This is a function pointer entry - * point called by the api module. + * Write to the GG82563 PHY register. **/ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, u32 offset, u16 data) @@ -571,8 +560,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw, * @words: number of words to write * @data: buffer of data to write to the NVM * - * Write "words" of data to the ESB2 NVM. This is a function - * pointer entry point called by the api module. + * Write "words" of data to the ESB2 NVM. **/ static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) @@ -602,7 +590,7 @@ static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw) timeout--; } if (!timeout) { - hw_dbg(hw, "MNG configuration cycle has not completed.\n"); + e_dbg("MNG configuration cycle has not completed.\n"); return -E1000_ERR_RESET; } @@ -635,7 +623,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "GG82563 PSCR: %X\n", phy_data); + e_dbg("GG82563 PSCR: %X\n", phy_data); ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -653,7 +641,7 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) udelay(1); if (hw->phy.autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link " + e_dbg("Waiting for forced speed/duplex link " "on GG82563 phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -712,21 +700,27 @@ static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw) static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data; - u16 index; + s32 ret_val = 0; + u16 phy_data, index; ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data); if (ret_val) - return ret_val; + goto out; index = phy_data & GG82563_DSPD_CABLE_LENGTH; + + if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5) { + ret_val = -E1000_ERR_PHY; + goto out; + } + phy->min_cable_length = e1000_gg82563_cable_length_table[index]; - phy->max_cable_length = e1000_gg82563_cable_length_table[index+5]; + phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5]; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; - return 0; +out: + return ret_val; } /** @@ -736,7 +730,6 @@ static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw) * @duplex: pointer to duplex buffer * * Retrieve the current speed and duplex configuration. - * This is a function pointer entry point called by the api module. **/ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed, u16 *duplex) @@ -762,12 +755,10 @@ static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed, * @hw: pointer to the HW structure * * Perform a global reset to the ESB2 controller. - * This is a function pointer entry point called by the api module. **/ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) { - u32 ctrl; - u32 icr; + u32 ctrl, icr; s32 ret_val; /* @@ -776,9 +767,9 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); ew32(RCTL, 0); @@ -790,7 +781,7 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) ctrl = er32(CTRL); ret_val = e1000_acquire_phy_80003es2lan(hw); - hw_dbg(hw, "Issuing a global reset to MAC\n"); + e_dbg("Issuing a global reset to MAC\n"); ew32(CTRL, ctrl | E1000_CTRL_RST); e1000_release_phy_80003es2lan(hw); @@ -811,7 +802,6 @@ static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw) * @hw: pointer to the HW structure * * Initialize the hw bits, LED, VFTA, MTA, link and hw counters. - * This is a function pointer entry point called by the api module. **/ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) { @@ -824,20 +814,19 @@ static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = e1000e_id_led_init(hw); - if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); - return ret_val; - } + if (ret_val) + e_dbg("Error initializing identification LED\n"); + /* This is not fatal and we should not stop init due to this */ /* Disabling VLAN filtering */ - hw_dbg(hw, "Initializing the IEEE VLAN\n"); - e1000e_clear_vfta(hw); + e_dbg("Initializing the IEEE VLAN\n"); + mac->ops.clear_vfta(hw); /* Setup the receive address. */ e1000e_init_rx_addrs(hw, mac->rar_entry_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -994,7 +983,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw) /* SW Reset the PHY so all changes take effect */ ret_val = e1000e_commit_phy(hw); if (ret_val) { - hw_dbg(hw, "Error Resetting the PHY\n"); + e_dbg("Error Resetting the PHY\n"); return ret_val; } @@ -1318,6 +1307,23 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, } /** + * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw) +{ + /* If the management interface is not enabled, then power down */ + if (!(hw->mac.ops.check_mng_mode(hw) || + hw->phy.ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + +/** * e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters * @hw: pointer to the HW structure * @@ -1325,44 +1331,42 @@ static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset, **/ static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw) { - u32 temp; - e1000e_clear_hw_cntrs_base(hw); - temp = er32(PRC64); - temp = er32(PRC127); - temp = er32(PRC255); - temp = er32(PRC511); - temp = er32(PRC1023); - temp = er32(PRC1522); - temp = er32(PTC64); - temp = er32(PTC127); - temp = er32(PTC255); - temp = er32(PTC511); - temp = er32(PTC1023); - temp = er32(PTC1522); - - temp = er32(ALGNERRC); - temp = er32(RXERRC); - temp = er32(TNCRS); - temp = er32(CEXTERR); - temp = er32(TSCTC); - temp = er32(TSCTFC); - - temp = er32(MGTPRC); - temp = er32(MGTPDC); - temp = er32(MGTPTC); - - temp = er32(IAC); - temp = er32(ICRXOC); - - temp = er32(ICRXPTC); - temp = er32(ICRXATC); - temp = er32(ICTXPTC); - temp = er32(ICTXATC); - temp = er32(ICTXQEC); - temp = er32(ICTXQMTC); - temp = er32(ICRXDMTC); + er32(PRC64); + er32(PRC127); + er32(PRC255); + er32(PRC511); + er32(PRC1023); + er32(PRC1522); + er32(PTC64); + er32(PTC127); + er32(PTC255); + er32(PTC511); + er32(PTC1023); + er32(PTC1522); + + er32(ALGNERRC); + er32(RXERRC); + er32(TNCRS); + er32(CEXTERR); + er32(TSCTC); + er32(TSCTFC); + + er32(MGTPRC); + er32(MGTPDC); + er32(MGTPTC); + + er32(IAC); + er32(ICRXOC); + + er32(ICRXPTC); + er32(ICRXATC); + er32(ICTXPTC); + er32(ICTXATC); + er32(ICTXQEC); + er32(ICTXQMTC); + er32(ICRXDMTC); } static struct e1000_mac_operations es2_mac_ops = { @@ -1376,6 +1380,8 @@ static struct e1000_mac_operations es2_mac_ops = { .led_on = e1000e_led_on_generic, .led_off = e1000e_led_off_generic, .update_mc_addr_list = e1000e_update_mc_addr_list_generic, + .write_vfta = e1000_write_vfta_generic, + .clear_vfta = e1000_clear_vfta_generic, .reset_hw = e1000_reset_hw_80003es2lan, .init_hw = e1000_init_hw_80003es2lan, .setup_link = e1000e_setup_link, @@ -1384,30 +1390,31 @@ static struct e1000_mac_operations es2_mac_ops = { }; static struct e1000_phy_operations es2_phy_ops = { - .acquire_phy = e1000_acquire_phy_80003es2lan, + .acquire = e1000_acquire_phy_80003es2lan, + .check_polarity = e1000_check_polarity_m88, .check_reset_block = e1000e_check_reset_block_generic, - .commit_phy = e1000e_phy_sw_reset, + .commit = e1000e_phy_sw_reset, .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan, .get_cfg_done = e1000_get_cfg_done_80003es2lan, .get_cable_length = e1000_get_cable_length_80003es2lan, - .get_phy_info = e1000e_get_phy_info_m88, - .read_phy_reg = e1000_read_phy_reg_gg82563_80003es2lan, - .release_phy = e1000_release_phy_80003es2lan, - .reset_phy = e1000e_phy_hw_reset_generic, + .get_info = e1000e_get_phy_info_m88, + .read_reg = e1000_read_phy_reg_gg82563_80003es2lan, + .release = e1000_release_phy_80003es2lan, + .reset = e1000e_phy_hw_reset_generic, .set_d0_lplu_state = NULL, .set_d3_lplu_state = e1000e_set_d3_lplu_state, - .write_phy_reg = e1000_write_phy_reg_gg82563_80003es2lan, + .write_reg = e1000_write_phy_reg_gg82563_80003es2lan, .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan, }; static struct e1000_nvm_operations es2_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_80003es2lan, - .read_nvm = e1000e_read_nvm_eerd, - .release_nvm = e1000_release_nvm_80003es2lan, - .update_nvm = e1000e_update_nvm_checksum_generic, + .acquire = e1000_acquire_nvm_80003es2lan, + .read = e1000e_read_nvm_eerd, + .release = e1000_release_nvm_80003es2lan, + .update = e1000e_update_nvm_checksum_generic, .valid_led_default = e1000e_valid_led_default, - .validate_nvm = e1000e_validate_nvm_checksum_generic, - .write_nvm = e1000_write_nvm_80003es2lan, + .validate = e1000e_validate_nvm_checksum_generic, + .write = e1000_write_nvm_80003es2lan, }; struct e1000_info e1000_es2_info = { diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 1bf4d2a5d34..0aa50c229c7 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -35,14 +35,22 @@ #include "e1000.h" +enum {NETDEV_STATS, E1000_STATS}; + struct e1000_stats { char stat_string[ETH_GSTRING_LEN]; + int type; int sizeof_stat; int stat_offset; }; -#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \ - offsetof(struct e1000_adapter, m) +#define E1000_STAT(m) E1000_STATS, \ + sizeof(((struct e1000_adapter *)0)->m), \ + offsetof(struct e1000_adapter, m) +#define E1000_NETDEV_STAT(m) NETDEV_STATS, \ + sizeof(((struct net_device *)0)->m), \ + offsetof(struct net_device, m) + static const struct e1000_stats e1000_gstrings_stats[] = { { "rx_packets", E1000_STAT(stats.gprc) }, { "tx_packets", E1000_STAT(stats.gptc) }, @@ -52,21 +60,21 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "tx_broadcast", E1000_STAT(stats.bptc) }, { "rx_multicast", E1000_STAT(stats.mprc) }, { "tx_multicast", E1000_STAT(stats.mptc) }, - { "rx_errors", E1000_STAT(net_stats.rx_errors) }, - { "tx_errors", E1000_STAT(net_stats.tx_errors) }, - { "tx_dropped", E1000_STAT(net_stats.tx_dropped) }, + { "rx_errors", E1000_NETDEV_STAT(stats.rx_errors) }, + { "tx_errors", E1000_NETDEV_STAT(stats.tx_errors) }, + { "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) }, { "multicast", E1000_STAT(stats.mprc) }, { "collisions", E1000_STAT(stats.colc) }, - { "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) }, - { "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) }, + { "rx_length_errors", E1000_NETDEV_STAT(stats.rx_length_errors) }, + { "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) }, { "rx_crc_errors", E1000_STAT(stats.crcerrs) }, - { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) }, + { "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) }, { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, { "rx_missed_errors", E1000_STAT(stats.mpc) }, { "tx_aborted_errors", E1000_STAT(stats.ecol) }, { "tx_carrier_errors", E1000_STAT(stats.tncrs) }, - { "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) }, - { "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) }, + { "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) }, + { "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) }, { "tx_window_errors", E1000_STAT(stats.latecol) }, { "tx_abort_late_coll", E1000_STAT(stats.latecol) }, { "tx_deferred_ok", E1000_STAT(stats.dc) }, @@ -182,6 +190,17 @@ static int e1000_get_settings(struct net_device *netdev, static u32 e1000_get_link(struct net_device *netdev) { struct e1000_adapter *adapter = netdev_priv(netdev); + struct e1000_mac_info *mac = &adapter->hw.mac; + + /* + * If the link is not reported up to netdev, interrupts are disabled, + * and so the physical link state may have changed since we last + * looked. Set get_link_status to make sure that the true link + * state is interrogated, rather than pulling a cached and possibly + * stale link state from the driver. + */ + if (!netif_carrier_ok(netdev)) + mac->get_link_status = 1; return e1000_has_link(adapter); } @@ -327,10 +346,18 @@ static int e1000_set_pauseparam(struct net_device *netdev, hw->fc.current_mode = hw->fc.requested_mode; - retval = ((hw->phy.media_type == e1000_media_type_fiber) ? - hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw)); + if (hw->phy.media_type == e1000_media_type_fiber) { + retval = hw->mac.ops.setup_link(hw); + /* implicit goto out */ + } else { + retval = e1000e_force_mac_fc(hw); + if (retval) + goto out; + e1000e_set_fc_watermarks(hw); + } } +out: clear_bit(__E1000_RESETTING, &adapter->state); return retval; } @@ -508,7 +535,8 @@ static int e1000_get_eeprom(struct net_device *netdev, if (ret_val) { /* a read error occurred, throw away the result */ - memset(eeprom_buff, 0xff, sizeof(eeprom_buff)); + memset(eeprom_buff, 0xff, sizeof(u16) * + (last_word - first_word + 1)); } else { /* Device's eeprom is always little-endian, word addressable */ for (i = 0; i < last_word - first_word + 1; i++) @@ -588,7 +616,9 @@ static int e1000_set_eeprom(struct net_device *netdev, * and flush shadow RAM for applicable controllers */ if ((first_word <= NVM_CHECKSUM_REG) || - (hw->mac.type == e1000_82574) || (hw->mac.type == e1000_82573)) + (hw->mac.type == e1000_82583) || + (hw->mac.type == e1000_82574) || + (hw->mac.type == e1000_82573)) ret_val = e1000e_update_nvm_checksum(hw); out: @@ -921,10 +951,10 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) e1000e_set_interrupt_capability(adapter); } /* Hook up test interrupt handler just for this test */ - if (!request_irq(irq, &e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, + if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name, netdev)) { shared_int = 0; - } else if (request_irq(irq, &e1000_test_intr, IRQF_SHARED, + } else if (request_irq(irq, e1000_test_intr, IRQF_SHARED, netdev->name, netdev)) { *data = 1; ret_val = -1; @@ -1231,6 +1261,10 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter) hw->mac.autoneg = 0; + /* Workaround: K1 must be disabled for stable 1Gbps operation */ + if (hw->mac.type == e1000_pchlan) + e1000_configure_k1_ich8lan(hw, false); + if (hw->phy.type == e1000_phy_m88) { /* Auto-MDI/MDIX Off */ e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808); @@ -1761,12 +1795,11 @@ static int e1000_set_wol(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); - if (wol->wolopts & WAKE_MAGICSECURE) - return -EOPNOTSUPP; - if (!(adapter->flags & FLAG_HAS_WOL) || - !device_can_wakeup(&adapter->pdev->dev)) - return wol->wolopts ? -EOPNOTSUPP : 0; + !device_can_wakeup(&adapter->pdev->dev) || + (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_MAGIC | WAKE_PHY | WAKE_ARP))) + return -EOPNOTSUPP; /* these settings will always override what we currently have */ adapter->wol = 0; @@ -1824,6 +1857,7 @@ static int e1000_phys_id(struct net_device *netdev, u32 data) if ((hw->phy.type == e1000_phy_ife) || (hw->mac.type == e1000_pchlan) || + (hw->mac.type == e1000_82583) || (hw->mac.type == e1000_82574)) { INIT_WORK(&adapter->led_blink_task, e1000e_led_blink_task); if (!adapter->blink_timer.function) { @@ -1904,10 +1938,21 @@ static void e1000_get_ethtool_stats(struct net_device *netdev, { struct e1000_adapter *adapter = netdev_priv(netdev); int i; + char *p = NULL; e1000e_update_stats(adapter); for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) { - char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset; + switch (e1000_gstrings_stats[i].type) { + case NETDEV_STATS: + p = (char *) netdev + + e1000_gstrings_stats[i].stat_offset; + break; + case E1000_STATS: + p = (char *) adapter + + e1000_gstrings_stats[i].stat_offset; + break; + } + data[i] = (e1000_gstrings_stats[i].sizeof_stat == sizeof(u64)) ? *(u64 *)p : *(u32 *)p; } @@ -1967,6 +2012,8 @@ static const struct ethtool_ops e1000_ethtool_ops = { .get_sset_count = e1000e_get_sset_count, .get_coalesce = e1000_get_coalesce, .set_coalesce = e1000_set_coalesce, + .get_flags = ethtool_op_get_flags, + .set_flags = ethtool_op_set_flags, }; void e1000e_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index aaea41ef794..a7d08dae79c 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -219,7 +219,7 @@ enum e1e_registers { E1000_HICR = 0x08F00, /* Host Interface Control */ }; -/* RSS registers */ +#define E1000_MAX_PHY_ADDR 4 /* IGP01E1000 Specific Registers */ #define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ @@ -356,6 +356,7 @@ enum e1e_registers { #define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA #define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB +#define E1000_DEV_ID_ICH8_82567V_3 0x1501 #define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049 #define E1000_DEV_ID_ICH8_IGP_AMT 0x104A #define E1000_DEV_ID_ICH8_IGP_C 0x104B @@ -741,6 +742,7 @@ struct e1000_mac_operations { s32 (*check_for_link)(struct e1000_hw *); s32 (*cleanup_led)(struct e1000_hw *); void (*clear_hw_cntrs)(struct e1000_hw *); + void (*clear_vfta)(struct e1000_hw *); s32 (*get_bus_info)(struct e1000_hw *); s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *); s32 (*led_on)(struct e1000_hw *); @@ -751,38 +753,41 @@ struct e1000_mac_operations { s32 (*setup_link)(struct e1000_hw *); s32 (*setup_physical_interface)(struct e1000_hw *); s32 (*setup_led)(struct e1000_hw *); + void (*write_vfta)(struct e1000_hw *, u32, u32); }; /* Function pointers for the PHY. */ struct e1000_phy_operations { - s32 (*acquire_phy)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*cfg_on_link_up)(struct e1000_hw *); s32 (*check_polarity)(struct e1000_hw *); s32 (*check_reset_block)(struct e1000_hw *); - s32 (*commit_phy)(struct e1000_hw *); + s32 (*commit)(struct e1000_hw *); s32 (*force_speed_duplex)(struct e1000_hw *); s32 (*get_cfg_done)(struct e1000_hw *hw); s32 (*get_cable_length)(struct e1000_hw *); - s32 (*get_phy_info)(struct e1000_hw *); - s32 (*read_phy_reg)(struct e1000_hw *, u32, u16 *); - s32 (*read_phy_reg_locked)(struct e1000_hw *, u32, u16 *); - void (*release_phy)(struct e1000_hw *); - s32 (*reset_phy)(struct e1000_hw *); + s32 (*get_info)(struct e1000_hw *); + s32 (*read_reg)(struct e1000_hw *, u32, u16 *); + s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *); + void (*release)(struct e1000_hw *); + s32 (*reset)(struct e1000_hw *); s32 (*set_d0_lplu_state)(struct e1000_hw *, bool); s32 (*set_d3_lplu_state)(struct e1000_hw *, bool); - s32 (*write_phy_reg)(struct e1000_hw *, u32, u16); - s32 (*write_phy_reg_locked)(struct e1000_hw *, u32, u16); - s32 (*cfg_on_link_up)(struct e1000_hw *); + s32 (*write_reg)(struct e1000_hw *, u32, u16); + s32 (*write_reg_locked)(struct e1000_hw *, u32, u16); + void (*power_up)(struct e1000_hw *); + void (*power_down)(struct e1000_hw *); }; /* Function pointers for the NVM. */ struct e1000_nvm_operations { - s32 (*acquire_nvm)(struct e1000_hw *); - s32 (*read_nvm)(struct e1000_hw *, u16, u16, u16 *); - void (*release_nvm)(struct e1000_hw *); - s32 (*update_nvm)(struct e1000_hw *); + s32 (*acquire)(struct e1000_hw *); + s32 (*read)(struct e1000_hw *, u16, u16, u16 *); + void (*release)(struct e1000_hw *); + s32 (*update)(struct e1000_hw *); s32 (*valid_led_default)(struct e1000_hw *, u16 *); - s32 (*validate_nvm)(struct e1000_hw *); - s32 (*write_nvm)(struct e1000_hw *, u16, u16, u16 *); + s32 (*validate)(struct e1000_hw *); + s32 (*write)(struct e1000_hw *, u16, u16, u16 *); }; struct e1000_mac_info { @@ -925,15 +930,4 @@ struct e1000_hw { } dev_spec; }; -#ifdef DEBUG -#define hw_dbg(hw, format, arg...) \ - printk(KERN_DEBUG "%s: " format, e1000e_get_hw_dev_name(hw), ##arg) -#else -static inline int __attribute__ ((format (printf, 2, 3))) -hw_dbg(struct e1000_hw *hw, const char *format, ...) -{ - return 0; -} -#endif - #endif diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 51ddb04ab19..7b33be98a2c 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -54,11 +54,6 @@ * 82578DC Gigabit Network Connection */ -#include <linux/netdevice.h> -#include <linux/ethtool.h> -#include <linux/delay.h> -#include <linux/pci.h> - #include "e1000.h" #define ICH_FLASH_GFPREG 0x0000 @@ -200,7 +195,6 @@ union ich8_flash_protected_range { static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw); static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw); static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw); -static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw); static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank); static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset, u8 byte); @@ -222,9 +216,9 @@ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw); static s32 e1000_led_on_pchlan(struct e1000_hw *hw); static s32 e1000_led_off_pchlan(struct e1000_hw *hw); static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active); +static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw); static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw); static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); -static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -265,26 +259,37 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) phy->addr = 1; phy->reset_delay_us = 100; - phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; - phy->ops.read_phy_reg = e1000_read_phy_reg_hv; - phy->ops.read_phy_reg_locked = e1000_read_phy_reg_hv_locked; + phy->ops.read_reg = e1000_read_phy_reg_hv; + phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked; phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan; phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan; - phy->ops.write_phy_reg = e1000_write_phy_reg_hv; - phy->ops.write_phy_reg_locked = e1000_write_phy_reg_hv_locked; + phy->ops.write_reg = e1000_write_phy_reg_hv; + phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; phy->id = e1000_phy_unknown; e1000e_get_phy_id(hw); phy->type = e1000e_get_phy_type_from_id(phy->id); - if (phy->type == e1000_phy_82577) { + switch (phy->type) { + case e1000_phy_82577: phy->ops.check_polarity = e1000_check_polarity_82577; phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_82577; - phy->ops.get_cable_length = e1000_get_cable_length_82577; - phy->ops.get_phy_info = e1000_get_phy_info_82577; - phy->ops.commit_phy = e1000e_phy_sw_reset; + phy->ops.get_cable_length = e1000_get_cable_length_82577; + phy->ops.get_info = e1000_get_phy_info_82577; + phy->ops.commit = e1000e_phy_sw_reset; + case e1000_phy_82578: + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88; + phy->ops.get_cable_length = e1000e_get_cable_length_m88; + phy->ops.get_info = e1000e_get_phy_info_m88; + break; + default: + ret_val = -E1000_ERR_PHY; + break; } return ret_val; @@ -305,17 +310,22 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) phy->addr = 1; phy->reset_delay_us = 100; + phy->ops.power_up = e1000_power_up_phy_copper; + phy->ops.power_down = e1000_power_down_phy_copper_ich8lan; + /* * We may need to do this twice - once for IGP and if that fails, * we'll set BM func pointers and try again */ ret_val = e1000e_determine_phy_address(hw); if (ret_val) { - hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm; - hw->phy.ops.read_phy_reg = e1000e_read_phy_reg_bm; + phy->ops.write_reg = e1000e_write_phy_reg_bm; + phy->ops.read_reg = e1000e_read_phy_reg_bm; ret_val = e1000e_determine_phy_address(hw); - if (ret_val) + if (ret_val) { + e_dbg("Cannot determine PHY addr. Erroring out\n"); return ret_val; + } } phy->id = 0; @@ -332,29 +342,36 @@ static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw) case IGP03E1000_E_PHY_ID: phy->type = e1000_phy_igp_3; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->ops.read_phy_reg_locked = e1000e_read_phy_reg_igp_locked; - phy->ops.write_phy_reg_locked = e1000e_write_phy_reg_igp_locked; + phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked; + phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked; + phy->ops.get_info = e1000e_get_phy_info_igp; + phy->ops.check_polarity = e1000_check_polarity_igp; + phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp; break; case IFE_E_PHY_ID: case IFE_PLUS_E_PHY_ID: case IFE_C_E_PHY_ID: phy->type = e1000_phy_ife; phy->autoneg_mask = E1000_ALL_NOT_GIG; + phy->ops.get_info = e1000_get_phy_info_ife; + phy->ops.check_polarity = e1000_check_polarity_ife; + phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife; break; case BME1000_E_PHY_ID: phy->type = e1000_phy_bm; phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - hw->phy.ops.read_phy_reg = e1000e_read_phy_reg_bm; - hw->phy.ops.write_phy_reg = e1000e_write_phy_reg_bm; - hw->phy.ops.commit_phy = e1000e_phy_sw_reset; + phy->ops.read_reg = e1000e_read_phy_reg_bm; + phy->ops.write_reg = e1000e_write_phy_reg_bm; + phy->ops.commit = e1000e_phy_sw_reset; + phy->ops.get_info = e1000e_get_phy_info_m88; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88; break; default: return -E1000_ERR_PHY; break; } - phy->ops.check_polarity = e1000_check_polarity_ife_ich8lan; - return 0; } @@ -374,7 +391,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Can't read flash registers if the register set isn't mapped. */ if (!hw->flash_address) { - hw_dbg(hw, "ERROR: Flash registers not mapped\n"); + e_dbg("ERROR: Flash registers not mapped\n"); return -E1000_ERR_CONFIG; } @@ -407,7 +424,7 @@ static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw) /* Clear shadow ram */ for (i = 0; i < nvm->word_size; i++) { - dev_spec->shadow_ram[i].modified = 0; + dev_spec->shadow_ram[i].modified = false; dev_spec->shadow_ram[i].value = 0xFFFF; } @@ -436,7 +453,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) if (mac->type == e1000_ich8lan) mac->rar_entry_count--; /* Set if manageability features are enabled. */ - mac->arc_subsystem_valid = 1; + mac->arc_subsystem_valid = true; /* LED operations */ switch (mac->type) { @@ -470,7 +487,7 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) /* Enable PCS Lock-loss workaround for ICH8 */ if (mac->type == e1000_ich8lan) - e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, 1); + e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); return 0; } @@ -556,7 +573,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); out: return ret_val; @@ -636,8 +653,6 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT; s32 ret_val = 0; - might_sleep(); - mutex_lock(&swflag_mutex); while (timeout) { @@ -650,7 +665,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "SW/FW/HW has locked the resource for too long.\n"); + e_dbg("SW/FW/HW has locked the resource for too long.\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -670,7 +685,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "Failed to acquire the semaphore.\n"); + e_dbg("Failed to acquire the semaphore.\n"); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); ret_val = -E1000_ERR_CONFIG; @@ -714,7 +729,9 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) **/ static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw) { - u32 fwsm = er32(FWSM); + u32 fwsm; + + fwsm = er32(FWSM); return (fwsm & E1000_FWSM_MODE_MASK) == (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); @@ -738,77 +755,6 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) } /** - * e1000_phy_force_speed_duplex_ich8lan - Force PHY speed & duplex - * @hw: pointer to the HW structure - * - * Forces the speed and duplex settings of the PHY. - * This is a function pointer entry point only called by - * PHY setup routines. - **/ -static s32 e1000_phy_force_speed_duplex_ich8lan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - bool link; - - if (phy->type != e1000_phy_ife) { - ret_val = e1000e_phy_force_speed_duplex_igp(hw); - return ret_val; - } - - ret_val = e1e_rphy(hw, PHY_CONTROL, &data); - if (ret_val) - return ret_val; - - e1000e_phy_force_speed_duplex_setup(hw, &data); - - ret_val = e1e_wphy(hw, PHY_CONTROL, data); - if (ret_val) - return ret_val; - - /* Disable MDI-X support for 10/100 */ - ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data); - if (ret_val) - return ret_val; - - data &= ~IFE_PMC_AUTO_MDIX; - data &= ~IFE_PMC_FORCE_MDIX; - - ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data); - if (ret_val) - return ret_val; - - hw_dbg(hw, "IFE PMC: %X\n", data); - - udelay(1); - - if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on IFE phy.\n"); - - ret_val = e1000e_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); - if (ret_val) - return ret_val; - - if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); - - /* Try once more */ - ret_val = e1000e_phy_has_link_generic(hw, - PHY_FORCE_LIMIT, - 100000, - &link); - if (ret_val) - return ret_val; - } - - return 0; -} - -/** * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration * @hw: pointer to the HW structure * @@ -822,7 +768,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) s32 ret_val; u16 word_addr, reg_data, reg_addr, phy_page = 0; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -918,7 +864,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) reg_addr &= PHY_REG_MASK; reg_addr |= phy_page; - ret_val = phy->ops.write_phy_reg_locked(hw, + ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr, reg_data); if (ret_val) @@ -927,7 +873,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) } out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -951,15 +897,14 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) goto out; /* Wrap the whole flow with the sw flag */ - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */ if (link) { if (hw->phy.type == e1000_phy_82578) { - ret_val = hw->phy.ops.read_phy_reg_locked(hw, - BM_CS_STATUS, + ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS, &status_reg); if (ret_val) goto release; @@ -975,8 +920,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) } if (hw->phy.type == e1000_phy_82577) { - ret_val = hw->phy.ops.read_phy_reg_locked(hw, - HV_M_STATUS, + ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS, &status_reg); if (ret_val) goto release; @@ -992,14 +936,14 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) } /* Link stall fix for link up */ - ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19), 0x0100); if (ret_val) goto release; } else { /* Link stall fix for link down */ - ret_val = hw->phy.ops.write_phy_reg_locked(hw, PHY_REG(770, 19), + ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19), 0x4100); if (ret_val) goto release; @@ -1008,7 +952,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link) ret_val = e1000_configure_k1_ich8lan(hw, k1_enable); release: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; } @@ -1023,7 +967,7 @@ out: * * Success returns 0, Failure returns -E1000_ERR_PHY (-2) **/ -static s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) +s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable) { s32 ret_val = 0; u32 ctrl_reg = 0; @@ -1084,7 +1028,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) if (hw->mac.type != e1000_pchlan) return ret_val; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -1098,7 +1042,7 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) mac_reg = er32(PHY_CTRL); - ret_val = hw->phy.ops.read_phy_reg_locked(hw, HV_OEM_BITS, &oem_reg); + ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg); if (ret_val) goto out; @@ -1118,11 +1062,12 @@ static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state) oem_reg |= HV_OEM_BITS_LPLU; } /* Restart auto-neg to activate the bits */ - oem_reg |= HV_OEM_BITS_RESTART_AN; - ret_val = hw->phy.ops.write_phy_reg_locked(hw, HV_OEM_BITS, oem_reg); + if (!e1000_check_reset_block(hw)) + oem_reg |= HV_OEM_BITS_RESTART_AN; + ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -1165,7 +1110,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) } /* Select page 0 */ - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -1173,7 +1118,7 @@ static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw) ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0); if (ret_val) goto out; - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); /* * Configure the K1 Si workaround during phy reset assuming there is @@ -1209,7 +1154,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw) * leave the PHY in a bad state possibly resulting in no link. */ if (loop == 0) - hw_dbg(hw, "LAN_INIT_DONE not set, increase timeout\n"); + e_dbg("LAN_INIT_DONE not set, increase timeout\n"); /* Clear the Init Done bit for the next init event */ data = er32(STATUS); @@ -1261,122 +1206,6 @@ out: } /** - * e1000_get_phy_info_ife_ich8lan - Retrieves various IFE PHY states - * @hw: pointer to the HW structure - * - * Populates "phy" structure with various feature states. - * This function is only called by other family-specific - * routines. - **/ -static s32 e1000_get_phy_info_ife_ich8lan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 data; - bool link; - - ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); - if (ret_val) - return ret_val; - - if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); - return -E1000_ERR_CONFIG; - } - - ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data); - if (ret_val) - return ret_val; - phy->polarity_correction = (!(data & IFE_PSC_AUTO_POLARITY_DISABLE)); - - if (phy->polarity_correction) { - ret_val = phy->ops.check_polarity(hw); - if (ret_val) - return ret_val; - } else { - /* Polarity is forced */ - phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; - } - - ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data); - if (ret_val) - return ret_val; - - phy->is_mdix = (data & IFE_PMC_MDIX_STATUS); - - /* The following parameters are undefined for 10/100 operation. */ - phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; - phy->local_rx = e1000_1000t_rx_status_undefined; - phy->remote_rx = e1000_1000t_rx_status_undefined; - - return 0; -} - -/** - * e1000_get_phy_info_ich8lan - Calls appropriate PHY type get_phy_info - * @hw: pointer to the HW structure - * - * Wrapper for calling the get_phy_info routines for the appropriate phy type. - * This is a function pointer entry point called by drivers - * or other shared routines. - **/ -static s32 e1000_get_phy_info_ich8lan(struct e1000_hw *hw) -{ - switch (hw->phy.type) { - case e1000_phy_ife: - return e1000_get_phy_info_ife_ich8lan(hw); - break; - case e1000_phy_igp_3: - case e1000_phy_bm: - case e1000_phy_82578: - case e1000_phy_82577: - return e1000e_get_phy_info_igp(hw); - break; - default: - break; - } - - return -E1000_ERR_PHY_TYPE; -} - -/** - * e1000_check_polarity_ife_ich8lan - Check cable polarity for IFE PHY - * @hw: pointer to the HW structure - * - * Polarity is determined on the polarity reversal feature being enabled. - * This function is only called by other family-specific - * routines. - **/ -static s32 e1000_check_polarity_ife_ich8lan(struct e1000_hw *hw) -{ - struct e1000_phy_info *phy = &hw->phy; - s32 ret_val; - u16 phy_data, offset, mask; - - /* - * Polarity is determined based on the reversal feature being enabled. - */ - if (phy->polarity_correction) { - offset = IFE_PHY_EXTENDED_STATUS_CONTROL; - mask = IFE_PESC_POLARITY_REVERSED; - } else { - offset = IFE_PHY_SPECIAL_CONTROL; - mask = IFE_PSC_FORCE_POLARITY; - } - - ret_val = e1e_rphy(hw, offset, &phy_data); - - if (!ret_val) - phy->cable_polarity = (phy_data & mask) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; - - return ret_val; -} - -/** * e1000_set_lplu_state_pchlan - Set Low Power Link Up state * @hw: pointer to the HW structure * @active: true to enable LPLU, false to disable @@ -1411,7 +1240,7 @@ out: /** * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state * @hw: pointer to the HW structure - * @active: TRUE to enable LPLU, FALSE to disable + * @active: true to enable LPLU, false to disable * * Sets the LPLU D0 state according to the active flag. When * activating LPLU this function also disables smart speed @@ -1497,7 +1326,7 @@ static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active) /** * e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state * @hw: pointer to the HW structure - * @active: TRUE to enable LPLU, FALSE to disable + * @active: true to enable LPLU, false to disable * * Sets the LPLU D3 state according to the active flag. When * activating LPLU this function also disables smart speed @@ -1610,7 +1439,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) return 0; } - hw_dbg(hw, "Unable to determine valid NVM bank via EEC - " + e_dbg("Unable to determine valid NVM bank via EEC - " "reading flash signature\n"); /* fall-thru */ default: @@ -1640,7 +1469,7 @@ static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank) return 0; } - hw_dbg(hw, "ERROR: No valid NVM bank present\n"); + e_dbg("ERROR: No valid NVM bank present\n"); return -E1000_ERR_NVM; } @@ -1668,16 +1497,16 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); ret_val = -E1000_ERR_NVM; goto out; } - nvm->ops.acquire_nvm(hw); + nvm->ops.acquire(hw); ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { - hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n"); + e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; } @@ -1699,11 +1528,11 @@ static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, } } - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); out: if (ret_val) - hw_dbg(hw, "NVM read error: %d\n", ret_val); + e_dbg("NVM read error: %d\n", ret_val); return ret_val; } @@ -1725,7 +1554,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) /* Check if the flash descriptor is valid */ if (hsfsts.hsf_status.fldesvalid == 0) { - hw_dbg(hw, "Flash descriptor invalid. " + e_dbg("Flash descriptor invalid. " "SW Sequencing must be used."); return -E1000_ERR_NVM; } @@ -1748,7 +1577,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) if (hsfsts.hsf_status.flcinprog == 0) { /* * There is no cycle running at present, - * so we can start a cycle + * so we can start a cycle. * Begin by setting Flash Cycle Done. */ hsfsts.hsf_status.flcdone = 1; @@ -1756,7 +1585,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) ret_val = 0; } else { /* - * otherwise poll for sometime so the current + * Otherwise poll for sometime so the current * cycle has a chance to end before giving up. */ for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) { @@ -1775,7 +1604,7 @@ static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flcdone = 1; ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval); } else { - hw_dbg(hw, "Flash controller busy, cannot get access"); + e_dbg("Flash controller busy, cannot get access"); } } @@ -1925,7 +1754,7 @@ static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* Repeat for some time before giving up. */ continue; } else if (hsfsts.hsf_status.flcdone == 0) { - hw_dbg(hw, "Timeout error - flash cycle " + e_dbg("Timeout error - flash cycle " "did not complete."); break; } @@ -1953,18 +1782,18 @@ static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words, if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } - nvm->ops.acquire_nvm(hw); + nvm->ops.acquire(hw); for (i = 0; i < words; i++) { - dev_spec->shadow_ram[offset+i].modified = 1; + dev_spec->shadow_ram[offset+i].modified = true; dev_spec->shadow_ram[offset+i].value = data[i]; } - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); return 0; } @@ -1995,7 +1824,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) if (nvm->type != e1000_nvm_flash_sw) goto out; - nvm->ops.acquire_nvm(hw); + nvm->ops.acquire(hw); /* * We're writing to the opposite bank so if we're on bank 1, @@ -2004,7 +1833,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) */ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank); if (ret_val) { - hw_dbg(hw, "Could not detect valid bank, assuming bank 0\n"); + e_dbg("Could not detect valid bank, assuming bank 0\n"); bank = 0; } @@ -2013,7 +1842,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) old_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 1); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } } else { @@ -2021,7 +1850,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) new_bank_offset = 0; ret_val = e1000_erase_flash_bank_ich8lan(hw, 0); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } } @@ -2078,8 +1907,8 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) */ if (ret_val) { /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */ - hw_dbg(hw, "Flash commit failed.\n"); - nvm->ops.release_nvm(hw); + e_dbg("Flash commit failed.\n"); + nvm->ops.release(hw); goto out; } @@ -2092,7 +1921,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD; ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } data &= 0xBFFF; @@ -2100,7 +1929,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset * 2 + 1, (u8)(data >> 8)); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } @@ -2113,17 +1942,17 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1; ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); goto out; } /* Great! Everything worked, we can now clear the cached entries. */ for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) { - dev_spec->shadow_ram[i].modified = 0; + dev_spec->shadow_ram[i].modified = false; dev_spec->shadow_ram[i].value = 0xFFFF; } - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); /* * Reload the EEPROM, or else modifications will not appear @@ -2134,7 +1963,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw) out: if (ret_val) - hw_dbg(hw, "NVM update error: %d\n", ret_val); + e_dbg("NVM update error: %d\n", ret_val); return ret_val; } @@ -2192,7 +2021,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) union ich8_hws_flash_status hsfsts; u32 gfpreg; - nvm->ops.acquire_nvm(hw); + nvm->ops.acquire(hw); gfpreg = er32flash(ICH_FLASH_GFPREG); @@ -2213,7 +2042,7 @@ void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw) hsfsts.hsf_status.flockdn = true; ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval); - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); } /** @@ -2284,7 +2113,7 @@ static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset, /* Repeat for some time before giving up. */ continue; if (hsfsts.hsf_status.flcdone == 0) { - hw_dbg(hw, "Timeout error - flash cycle " + e_dbg("Timeout error - flash cycle " "did not complete."); break; } @@ -2329,7 +2158,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw, return ret_val; for (program_retries = 0; program_retries < 100; program_retries++) { - hw_dbg(hw, "Retrying Byte %2.2X at offset %u\n", byte, offset); + e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset); udelay(100); ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte); if (!ret_val) @@ -2359,9 +2188,7 @@ static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank) u32 flash_bank_size = nvm->flash_bank_size * 2; s32 ret_val; s32 count = 0; - s32 iteration; - s32 sector_size; - s32 j; + s32 j, iteration, sector_size; hsfsts.regval = er16flash(ICH_FLASH_HSFSTS); @@ -2464,7 +2291,7 @@ static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -2594,10 +2421,10 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) */ ret_val = e1000e_disable_pcie_master(hw); if (ret_val) { - hw_dbg(hw, "PCI-E Master disable polling has failed.\n"); + e_dbg("PCI-E Master disable polling has failed.\n"); } - hw_dbg(hw, "Masking off all interrupts\n"); + e_dbg("Masking off all interrupts\n"); ew32(IMC, 0xffffffff); /* @@ -2648,8 +2475,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) ctrl |= E1000_CTRL_PHY_RST; } ret_val = e1000_acquire_swflag_ich8lan(hw); - /* Whether or not the swflag was acquired, we need to reset the part */ - hw_dbg(hw, "Issuing a global reset to ich8lan\n"); + e_dbg("Issuing a global reset to ich8lan\n"); ew32(CTRL, (ctrl | E1000_CTRL_RST)); msleep(20); @@ -2669,7 +2495,7 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * return with an error. This can happen in situations * where there is no eeprom and prevents getting link. */ - hw_dbg(hw, "Auto Read Done did not complete\n"); + e_dbg("Auto Read Done did not complete\n"); } } /* Dummy read to clear the phy wakeup bit after lcd reset */ @@ -2730,16 +2556,15 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) /* Initialize identification LED */ ret_val = mac->ops.id_led_init(hw); - if (ret_val) { - hw_dbg(hw, "Error initializing identification LED\n"); - return ret_val; - } + if (ret_val) + e_dbg("Error initializing identification LED\n"); + /* This is not fatal and we should not stop init due to this */ /* Setup the receive address. */ e1000e_init_rx_addrs(hw, mac->rar_entry_count); /* Zero out the Multicast HASH table */ - hw_dbg(hw, "Zeroing the MTA\n"); + e_dbg("Zeroing the MTA\n"); for (i = 0; i < mac->mta_reg_count; i++) E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); @@ -2749,7 +2574,7 @@ static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw) * Reset the phy after disabling host wakeup to reset the Rx buffer. */ if (hw->phy.type == e1000_phy_82578) { - hw->phy.ops.read_phy_reg(hw, BM_WUC, &i); + hw->phy.ops.read_reg(hw, BM_WUC, &i); ret_val = e1000_phy_hw_reset_ich8lan(hw); if (ret_val) return ret_val; @@ -2885,7 +2710,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) */ hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", + e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Continue to configure the copper link. */ @@ -2896,7 +2721,7 @@ static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) ew32(FCTTV, hw->fc.pause_time); if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82577)) { - ret_val = hw->phy.ops.write_phy_reg(hw, + ret_val = hw->phy.ops.write_reg(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27), hw->fc.pause_time); if (ret_val) @@ -2959,7 +2784,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; break; case e1000_phy_ife: - ret_val = hw->phy.ops.read_phy_reg(hw, IFE_PHY_MDIX_CONTROL, + ret_val = hw->phy.ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, ®_data); if (ret_val) return ret_val; @@ -2978,7 +2803,7 @@ static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw) reg_data |= IFE_PMC_AUTO_MDIX; break; } - ret_val = hw->phy.ops.write_phy_reg(hw, IFE_PHY_MDIX_CONTROL, + ret_val = hw->phy.ops.write_reg(hw, IFE_PHY_MDIX_CONTROL, reg_data); if (ret_val) return ret_val; @@ -3091,8 +2916,8 @@ static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw) * @hw: pointer to the HW structure * @state: boolean value used to set the current Kumeran workaround state * - * If ICH8, set the current Kumeran workaround state (enabled - TRUE - * /disabled - FALSE). + * If ICH8, set the current Kumeran workaround state (enabled - true + * /disabled - false). **/ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, bool state) @@ -3100,7 +2925,7 @@ void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw, struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan; if (hw->mac.type != e1000_ich8lan) { - hw_dbg(hw, "Workaround applies to ICH8 only.\n"); + e_dbg("Workaround applies to ICH8 only.\n"); return; } @@ -3208,6 +3033,7 @@ void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) u32 phy_ctrl; switch (hw->mac.type) { + case e1000_ich8lan: case e1000_ich9lan: case e1000_ich10lan: case e1000_pchlan: @@ -3280,7 +3106,7 @@ static s32 e1000_led_off_ich8lan(struct e1000_hw *hw) **/ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw) { - return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, + return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1); } @@ -3292,7 +3118,7 @@ static s32 e1000_setup_led_pchlan(struct e1000_hw *hw) **/ static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw) { - return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, + return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default); } @@ -3324,7 +3150,7 @@ static s32 e1000_led_on_pchlan(struct e1000_hw *hw) } } - return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data); + return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data); } /** @@ -3355,7 +3181,7 @@ static s32 e1000_led_off_pchlan(struct e1000_hw *hw) } } - return hw->phy.ops.write_phy_reg(hw, HV_LED_CONFIG, data); + return hw->phy.ops.write_reg(hw, HV_LED_CONFIG, data); } /** @@ -3378,8 +3204,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) if (status & E1000_STATUS_PHYRA) ew32(STATUS, status & ~E1000_STATUS_PHYRA); else - hw_dbg(hw, - "PHY Reset Asserted not set - needs delay\n"); + e_dbg("PHY Reset Asserted not set - needs delay\n"); } e1000e_get_cfg_done(hw); @@ -3394,7 +3219,7 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) } else { if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) { /* Maybe we should do a basic PHY config */ - hw_dbg(hw, "EEPROM not present\n"); + e_dbg("EEPROM not present\n"); return -E1000_ERR_CONFIG; } } @@ -3403,6 +3228,23 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) } /** + * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, remove the link. + **/ +static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw) +{ + /* If the management interface is not enabled, then power down */ + if (!(hw->mac.ops.check_mng_mode(hw) || + hw->phy.ops.check_reset_block(hw))) + e1000_power_down_phy_copper(hw); + + return; +} + +/** * e1000_clear_hw_cntrs_ich8lan - Clear statistical counters * @hw: pointer to the HW structure * @@ -3411,42 +3253,41 @@ static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw) **/ static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw) { - u32 temp; u16 phy_data; e1000e_clear_hw_cntrs_base(hw); - temp = er32(ALGNERRC); - temp = er32(RXERRC); - temp = er32(TNCRS); - temp = er32(CEXTERR); - temp = er32(TSCTC); - temp = er32(TSCTFC); + er32(ALGNERRC); + er32(RXERRC); + er32(TNCRS); + er32(CEXTERR); + er32(TSCTC); + er32(TSCTFC); - temp = er32(MGTPRC); - temp = er32(MGTPDC); - temp = er32(MGTPTC); + er32(MGTPRC); + er32(MGTPDC); + er32(MGTPTC); - temp = er32(IAC); - temp = er32(ICRXOC); + er32(IAC); + er32(ICRXOC); /* Clear PHY statistics registers */ if ((hw->phy.type == e1000_phy_82578) || (hw->phy.type == e1000_phy_82577)) { - hw->phy.ops.read_phy_reg(hw, HV_SCC_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_SCC_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_ECOL_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_ECOL_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_MCC_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_MCC_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_LATECOL_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_LATECOL_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_COLC_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_COLC_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_DC_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_DC_LOWER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_TNCRS_UPPER, &phy_data); - hw->phy.ops.read_phy_reg(hw, HV_TNCRS_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_SCC_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_SCC_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_ECOL_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_ECOL_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_MCC_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_MCC_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_LATECOL_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_LATECOL_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_COLC_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_COLC_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_DC_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_DC_LOWER, &phy_data); + hw->phy.ops.read_reg(hw, HV_TNCRS_UPPER, &phy_data); + hw->phy.ops.read_reg(hw, HV_TNCRS_LOWER, &phy_data); } } @@ -3469,29 +3310,27 @@ static struct e1000_mac_operations ich8_mac_ops = { }; static struct e1000_phy_operations ich8_phy_ops = { - .acquire_phy = e1000_acquire_swflag_ich8lan, + .acquire = e1000_acquire_swflag_ich8lan, .check_reset_block = e1000_check_reset_block_ich8lan, - .commit_phy = NULL, - .force_speed_duplex = e1000_phy_force_speed_duplex_ich8lan, + .commit = NULL, .get_cfg_done = e1000_get_cfg_done_ich8lan, .get_cable_length = e1000e_get_cable_length_igp_2, - .get_phy_info = e1000_get_phy_info_ich8lan, - .read_phy_reg = e1000e_read_phy_reg_igp, - .release_phy = e1000_release_swflag_ich8lan, - .reset_phy = e1000_phy_hw_reset_ich8lan, + .read_reg = e1000e_read_phy_reg_igp, + .release = e1000_release_swflag_ich8lan, + .reset = e1000_phy_hw_reset_ich8lan, .set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan, .set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan, - .write_phy_reg = e1000e_write_phy_reg_igp, + .write_reg = e1000e_write_phy_reg_igp, }; static struct e1000_nvm_operations ich8_nvm_ops = { - .acquire_nvm = e1000_acquire_nvm_ich8lan, - .read_nvm = e1000_read_nvm_ich8lan, - .release_nvm = e1000_release_nvm_ich8lan, - .update_nvm = e1000_update_nvm_checksum_ich8lan, + .acquire = e1000_acquire_nvm_ich8lan, + .read = e1000_read_nvm_ich8lan, + .release = e1000_release_nvm_ich8lan, + .update = e1000_update_nvm_checksum_ich8lan, .valid_led_default = e1000_valid_led_default_ich8lan, - .validate_nvm = e1000_validate_nvm_checksum_ich8lan, - .write_nvm = e1000_write_nvm_ich8lan, + .validate = e1000_validate_nvm_checksum_ich8lan, + .write = e1000_write_nvm_ich8lan, }; struct e1000_info e1000_ich8_info = { @@ -3558,6 +3397,7 @@ struct e1000_info e1000_pch_info = { | FLAG_HAS_AMT | FLAG_HAS_FLASH | FLAG_HAS_JUMBO_FRAMES + | FLAG_DISABLE_FC_PAUSE_TIME /* errata */ | FLAG_APME_IN_WUC, .pba = 26, .max_hw_frame_size = 4096, diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 99ba2b8a2a0..a86c17548c1 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -26,11 +26,6 @@ *******************************************************************************/ -#include <linux/netdevice.h> -#include <linux/ethtool.h> -#include <linux/delay.h> -#include <linux/pci.h> - #include "e1000.h" enum e1000_mng_mode { @@ -87,7 +82,24 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw) } /** - * e1000e_write_vfta - Write value to VLAN filter table + * e1000_clear_vfta_generic - Clear VLAN filter table + * @hw: pointer to the HW structure + * + * Clears the register array which contains the VLAN filter table by + * setting all the values to 0. + **/ +void e1000_clear_vfta_generic(struct e1000_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0); + e1e_flush(); + } +} + +/** + * e1000_write_vfta_generic - Write value to VLAN filter table * @hw: pointer to the HW structure * @offset: register offset in VLAN filter table * @value: register value written to VLAN filter table @@ -95,7 +107,7 @@ s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw) * Writes value at the given offset in the register array which stores * the VLAN filter table. **/ -void e1000e_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) +void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value) { E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value); e1e_flush(); @@ -115,12 +127,12 @@ void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count) u32 i; /* Setup the receive address */ - hw_dbg(hw, "Programming MAC Address into RAR[0]\n"); + e_dbg("Programming MAC Address into RAR[0]\n"); e1000e_rar_set(hw, hw->mac.addr, 0); /* Zero out the other (rar_entry_count - 1) receive addresses */ - hw_dbg(hw, "Clearing RAR[1-%u]\n", rar_count-1); + e_dbg("Clearing RAR[1-%u]\n", rar_count-1); for (i = 1; i < rar_count; i++) { E1000_WRITE_REG_ARRAY(hw, E1000_RA, (i << 1), 0); e1e_flush(); @@ -276,7 +288,7 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, for (; mc_addr_count > 0; mc_addr_count--) { u32 hash_value, hash_reg, hash_bit, mta; hash_value = e1000_hash_mc_addr(hw, mc_addr_list); - hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); + e_dbg("Hash value = 0x%03X\n", hash_value); hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); hash_bit = hash_value & 0x1F; mta = (1 << hash_bit); @@ -300,45 +312,43 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, **/ void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw) { - u32 temp; - - temp = er32(CRCERRS); - temp = er32(SYMERRS); - temp = er32(MPC); - temp = er32(SCC); - temp = er32(ECOL); - temp = er32(MCC); - temp = er32(LATECOL); - temp = er32(COLC); - temp = er32(DC); - temp = er32(SEC); - temp = er32(RLEC); - temp = er32(XONRXC); - temp = er32(XONTXC); - temp = er32(XOFFRXC); - temp = er32(XOFFTXC); - temp = er32(FCRUC); - temp = er32(GPRC); - temp = er32(BPRC); - temp = er32(MPRC); - temp = er32(GPTC); - temp = er32(GORCL); - temp = er32(GORCH); - temp = er32(GOTCL); - temp = er32(GOTCH); - temp = er32(RNBC); - temp = er32(RUC); - temp = er32(RFC); - temp = er32(ROC); - temp = er32(RJC); - temp = er32(TORL); - temp = er32(TORH); - temp = er32(TOTL); - temp = er32(TOTH); - temp = er32(TPR); - temp = er32(TPT); - temp = er32(MPTC); - temp = er32(BPTC); + er32(CRCERRS); + er32(SYMERRS); + er32(MPC); + er32(SCC); + er32(ECOL); + er32(MCC); + er32(LATECOL); + er32(COLC); + er32(DC); + er32(SEC); + er32(RLEC); + er32(XONRXC); + er32(XONTXC); + er32(XOFFRXC); + er32(XOFFTXC); + er32(FCRUC); + er32(GPRC); + er32(BPRC); + er32(MPRC); + er32(GPTC); + er32(GORCL); + er32(GORCH); + er32(GOTCL); + er32(GOTCH); + er32(RNBC); + er32(RUC); + er32(RFC); + er32(ROC); + er32(RJC); + er32(TORL); + er32(TORH); + er32(TOTL); + er32(TOTH); + er32(TPR); + er32(TPT); + er32(MPTC); + er32(BPTC); } /** @@ -376,7 +386,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) if (!link) return ret_val; /* No link detected */ - mac->get_link_status = 0; + mac->get_link_status = false; /* * Check if there was DownShift, must be checked @@ -408,7 +418,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); } return ret_val; @@ -448,7 +458,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -461,7 +471,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) /* Configure Flow Control after forcing link up. */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); return ret_val; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { @@ -471,7 +481,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -513,7 +523,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - hw_dbg(hw, "NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -526,7 +536,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) /* Configure Flow Control after forcing link up. */ ret_val = e1000e_config_fc_after_link_up(hw); if (ret_val) { - hw_dbg(hw, "Error configuring flow control\n"); + e_dbg("Error configuring flow control\n"); return ret_val; } } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) { @@ -536,7 +546,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - hw_dbg(hw, "RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -553,11 +563,11 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; - hw_dbg(hw, "SERDES: Link up - forced.\n"); + e_dbg("SERDES: Link up - forced.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - force failed.\n"); + e_dbg("SERDES: Link down - force failed.\n"); } } @@ -570,20 +580,20 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) if (rxcw & E1000_RXCW_SYNCH) { if (!(rxcw & E1000_RXCW_IV)) { mac->serdes_has_link = true; - hw_dbg(hw, "SERDES: Link up - autoneg " + e_dbg("SERDES: Link up - autoneg " "completed sucessfully.\n"); } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - invalid" + e_dbg("SERDES: Link down - invalid" "codewords detected in autoneg.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - no sync.\n"); + e_dbg("SERDES: Link down - no sync.\n"); } } else { mac->serdes_has_link = false; - hw_dbg(hw, "SERDES: Link down - autoneg failed\n"); + e_dbg("SERDES: Link down - autoneg failed\n"); } } @@ -614,7 +624,7 @@ static s32 e1000_set_default_fc_generic(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -667,7 +677,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw) */ hw->fc.current_mode = hw->fc.requested_mode; - hw_dbg(hw, "After fix-ups FlowControl is now = %x\n", + e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); /* Call the necessary media_type subroutine to configure the link. */ @@ -681,7 +691,7 @@ s32 e1000e_setup_link(struct e1000_hw *hw) * control is disabled, because it does not hurt anything to * initialize these registers. */ - hw_dbg(hw, "Initializing the Flow Control address, type and timer regs\n"); + e_dbg("Initializing the Flow Control address, type and timer regs\n"); ew32(FCT, FLOW_CONTROL_TYPE); ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH); ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW); @@ -751,7 +761,7 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; break; } @@ -789,7 +799,7 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) break; } if (i == FIBER_LINK_UP_LIMIT) { - hw_dbg(hw, "Never got a valid link from auto-neg!!!\n"); + e_dbg("Never got a valid link from auto-neg!!!\n"); mac->autoneg_failed = 1; /* * AutoNeg failed to achieve a link, so we'll call @@ -799,13 +809,13 @@ static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw) */ ret_val = mac->ops.check_for_link(hw); if (ret_val) { - hw_dbg(hw, "Error while checking for link\n"); + e_dbg("Error while checking for link\n"); return ret_val; } mac->autoneg_failed = 0; } else { mac->autoneg_failed = 0; - hw_dbg(hw, "Valid Link Found\n"); + e_dbg("Valid Link Found\n"); } return 0; @@ -841,7 +851,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) * then the link-up status bit will be set and the flow control enable * bits (RFCE and TFCE) will be set according to their negotiated value. */ - hw_dbg(hw, "Auto-negotiation enabled\n"); + e_dbg("Auto-negotiation enabled\n"); ew32(CTRL, ctrl); e1e_flush(); @@ -856,7 +866,7 @@ s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw) (er32(CTRL) & E1000_CTRL_SWDPIN1)) { ret_val = e1000_poll_fiber_serdes_link_generic(hw); } else { - hw_dbg(hw, "No signal detected\n"); + e_dbg("No signal detected\n"); } return 0; @@ -952,7 +962,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) * 3: Both Rx and Tx flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ - hw_dbg(hw, "hw->fc.current_mode = %u\n", hw->fc.current_mode); + e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode); switch (hw->fc.current_mode) { case e1000_fc_none: @@ -970,7 +980,7 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); return -E1000_ERR_CONFIG; } @@ -1011,7 +1021,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + e_dbg("Error forcing flow control settings\n"); return ret_val; } @@ -1035,7 +1045,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) return ret_val; if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) { - hw_dbg(hw, "Copper PHY and Auto Neg " + e_dbg("Copper PHY and Auto Neg " "has not completed.\n"); return ret_val; } @@ -1076,7 +1086,6 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * 1 | 1 | 0 | 0 | e1000_fc_none * 1 | 1 | 0 | 1 | e1000_fc_rx_pause * - * * Are both PAUSE bits set to 1? If so, this implies * Symmetric Flow Control is enabled at both ends. The * ASM_DIR bits are irrelevant per the spec. @@ -1100,10 +1109,10 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ if (hw->fc.requested_mode == e1000_fc_full) { hw->fc.current_mode = e1000_fc_full; - hw_dbg(hw, "Flow Control = FULL.\r\n"); + e_dbg("Flow Control = FULL.\r\n"); } else { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = " + e_dbg("Flow Control = " "RX PAUSE frames only.\r\n"); } } @@ -1114,14 +1123,13 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause - * */ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_tx_pause; - hw_dbg(hw, "Flow Control = Tx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Tx PAUSE frames only.\r\n"); } /* * For transmitting PAUSE frames ONLY. @@ -1130,21 +1138,20 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result *-------|---------|-------|---------|-------------------- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause - * */ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_rx_pause; - hw_dbg(hw, "Flow Control = Rx PAUSE frames only.\r\n"); + e_dbg("Flow Control = Rx PAUSE frames only.\r\n"); } else { /* * Per the IEEE spec, at this point flow control * should be disabled. */ hw->fc.current_mode = e1000_fc_none; - hw_dbg(hw, "Flow Control = NONE.\r\n"); + e_dbg("Flow Control = NONE.\r\n"); } /* @@ -1154,7 +1161,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex); if (ret_val) { - hw_dbg(hw, "Error getting link speed and duplex\n"); + e_dbg("Error getting link speed and duplex\n"); return ret_val; } @@ -1167,7 +1174,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) */ ret_val = e1000e_force_mac_fc(hw); if (ret_val) { - hw_dbg(hw, "Error forcing flow control settings\n"); + e_dbg("Error forcing flow control settings\n"); return ret_val; } } @@ -1191,21 +1198,21 @@ s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *dup status = er32(STATUS); if (status & E1000_STATUS_SPEED_1000) { *speed = SPEED_1000; - hw_dbg(hw, "1000 Mbs, "); + e_dbg("1000 Mbs, "); } else if (status & E1000_STATUS_SPEED_100) { *speed = SPEED_100; - hw_dbg(hw, "100 Mbs, "); + e_dbg("100 Mbs, "); } else { *speed = SPEED_10; - hw_dbg(hw, "10 Mbs, "); + e_dbg("10 Mbs, "); } if (status & E1000_STATUS_FD) { *duplex = FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + e_dbg("Full Duplex\n"); } else { *duplex = HALF_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + e_dbg("Half Duplex\n"); } return 0; @@ -1251,7 +1258,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) } if (i == timeout) { - hw_dbg(hw, "Driver can't access device - SMBI bit is set.\n"); + e_dbg("Driver can't access device - SMBI bit is set.\n"); return -E1000_ERR_NVM; } @@ -1270,7 +1277,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw) if (i == timeout) { /* Release semaphores */ e1000e_put_hw_semaphore(hw); - hw_dbg(hw, "Driver can't access the NVM\n"); + e_dbg("Driver can't access the NVM\n"); return -E1000_ERR_NVM; } @@ -1310,7 +1317,7 @@ s32 e1000e_get_auto_rd_done(struct e1000_hw *hw) } if (i == AUTO_READ_DONE_TIMEOUT) { - hw_dbg(hw, "Auto read by HW from NVM has not completed.\n"); + e_dbg("Auto read by HW from NVM has not completed.\n"); return -E1000_ERR_RESET; } @@ -1331,7 +1338,7 @@ s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data) ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } @@ -1585,7 +1592,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "Master requests are pending.\n"); + e_dbg("Master requests are pending.\n"); return -E1000_ERR_MASTER_REQUESTS_PENDING; } @@ -1608,7 +1615,7 @@ void e1000e_reset_adaptive(struct e1000_hw *hw) mac->ifs_step_size = IFS_STEP; mac->ifs_ratio = IFS_RATIO; - mac->in_ifs_mode = 0; + mac->in_ifs_mode = false; ew32(AIT, 0); } @@ -1625,7 +1632,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw) if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) { if (mac->tx_packet_delta > MIN_NUM_XMITS) { - mac->in_ifs_mode = 1; + mac->in_ifs_mode = true; if (mac->current_ifs_val < mac->ifs_max_val) { if (!mac->current_ifs_val) mac->current_ifs_val = mac->ifs_min_val; @@ -1639,7 +1646,7 @@ void e1000e_update_adaptive(struct e1000_hw *hw) if (mac->in_ifs_mode && (mac->tx_packet_delta <= MIN_NUM_XMITS)) { mac->current_ifs_val = 0; - mac->in_ifs_mode = 0; + mac->in_ifs_mode = false; ew32(AIT, 0); } } @@ -1809,7 +1816,7 @@ s32 e1000e_acquire_nvm(struct e1000_hw *hw) if (!timeout) { eecd &= ~E1000_EECD_REQ; ew32(EECD, eecd); - hw_dbg(hw, "Could not acquire NVM grant\n"); + e_dbg("Could not acquire NVM grant\n"); return -E1000_ERR_NVM; } @@ -1914,7 +1921,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) } if (!timeout) { - hw_dbg(hw, "SPI NVM Status error\n"); + e_dbg("SPI NVM Status error\n"); return -E1000_ERR_NVM; } } @@ -1943,7 +1950,7 @@ s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } @@ -1986,11 +1993,11 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) */ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) || (words == 0)) { - hw_dbg(hw, "nvm parameter(s) out of bounds\n"); + e_dbg("nvm parameter(s) out of bounds\n"); return -E1000_ERR_NVM; } - ret_val = nvm->ops.acquire_nvm(hw); + ret_val = nvm->ops.acquire(hw); if (ret_val) return ret_val; @@ -2001,7 +2008,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) ret_val = e1000_ready_nvm_eeprom(hw); if (ret_val) { - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); return ret_val; } @@ -2040,7 +2047,7 @@ s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) } msleep(10); - nvm->ops.release_nvm(hw); + nvm->ops.release(hw); return 0; } @@ -2066,7 +2073,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1, &mac_addr_offset); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } if (mac_addr_offset == 0xFFFF) @@ -2081,7 +2088,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) ret_val = e1000_read_nvm(hw, mac_addr_offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } if (nvm_data & 0x0001) @@ -2096,7 +2103,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw) offset = mac_addr_offset + (i >> 1); ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF); @@ -2129,14 +2136,14 @@ s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw) for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) { ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } checksum += nvm_data; } if (checksum != (u16) NVM_SUM) { - hw_dbg(hw, "NVM Checksum Invalid\n"); + e_dbg("NVM Checksum Invalid\n"); return -E1000_ERR_NVM; } @@ -2160,7 +2167,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) for (i = 0; i < NVM_CHECKSUM_REG; i++) { ret_val = e1000_read_nvm(hw, i, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error while updating checksum.\n"); + e_dbg("NVM Read Error while updating checksum.\n"); return ret_val; } checksum += nvm_data; @@ -2168,7 +2175,7 @@ s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw) checksum = (u16) NVM_SUM - checksum; ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum); if (ret_val) - hw_dbg(hw, "NVM Write Error while updating checksum.\n"); + e_dbg("NVM Write Error while updating checksum.\n"); return ret_val; } @@ -2231,7 +2238,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) /* Check that the host interface is enabled. */ hicr = er32(HICR); if ((hicr & E1000_HICR_EN) == 0) { - hw_dbg(hw, "E1000_HOST_EN bit disabled.\n"); + e_dbg("E1000_HOST_EN bit disabled.\n"); return -E1000_ERR_HOST_INTERFACE_COMMAND; } /* check the previous command is completed */ @@ -2243,7 +2250,7 @@ static s32 e1000_mng_enable_host_if(struct e1000_hw *hw) } if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { - hw_dbg(hw, "Previous command timeout failed .\n"); + e_dbg("Previous command timeout failed .\n"); return -E1000_ERR_HOST_INTERFACE_COMMAND; } @@ -2282,7 +2289,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) /* No manageability, no filtering */ if (!e1000e_check_mng_mode(hw)) { - hw->mac.tx_pkt_filtering = 0; + hw->mac.tx_pkt_filtering = false; return 0; } @@ -2292,7 +2299,7 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) */ ret_val = e1000_mng_enable_host_if(hw); if (ret_val != 0) { - hw->mac.tx_pkt_filtering = 0; + hw->mac.tx_pkt_filtering = false; return ret_val; } @@ -2311,17 +2318,17 @@ bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw) * take the safe route of assuming Tx filtering is enabled. */ if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) { - hw->mac.tx_pkt_filtering = 1; + hw->mac.tx_pkt_filtering = true; return 1; } /* Cookie area is valid, make the final check for filtering. */ if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) { - hw->mac.tx_pkt_filtering = 0; + hw->mac.tx_pkt_filtering = false; return 0; } - hw->mac.tx_pkt_filtering = 1; + hw->mac.tx_pkt_filtering = true; return 1; } @@ -2353,7 +2360,7 @@ static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, } /** - * e1000_mng_host_if_write - Writes to the manageability host interface + * e1000_mng_host_if_write - Write to the manageability host interface * @hw: pointer to the HW structure * @buffer: pointer to the host interface buffer * @length: size of the buffer @@ -2478,7 +2485,7 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) { u32 manc; u32 fwsm, factps; - bool ret_val = 0; + bool ret_val = false; manc = er32(MANC); @@ -2493,13 +2500,13 @@ bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw) if (!(factps & E1000_FACTPS_MNGCG) && ((fwsm & E1000_FWSM_MODE_MASK) == (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) { - ret_val = 1; + ret_val = true; return ret_val; } } else { if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) { - ret_val = 1; + ret_val = true; return ret_val; } } @@ -2514,14 +2521,14 @@ s32 e1000e_read_pba_num(struct e1000_hw *hw, u32 *pba_num) ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } *pba_num = (u32)(nvm_data << 16); ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &nvm_data); if (ret_val) { - hw_dbg(hw, "NVM Read Error\n"); + e_dbg("NVM Read Error\n"); return ret_val; } *pba_num |= nvm_data; diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 0687c6aa4e4..c3105c5087e 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -65,17 +65,6 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_pchlan] = &e1000_pch_info, }; -#ifdef DEBUG -/** - * e1000_get_hw_dev_name - return device name string - * used by hardware layer to print debugging information - **/ -char *e1000e_get_hw_dev_name(struct e1000_hw *hw) -{ - return hw->adapter->netdev->name; -} -#endif - /** * e1000_desc_unused - calculate if we have unused descriptors **/ @@ -167,7 +156,7 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info; struct sk_buff *skb; unsigned int i; - unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; + unsigned int bufsz = adapter->rx_buffer_len; i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; @@ -179,20 +168,13 @@ static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter, goto map_skb; } - skb = netdev_alloc_skb(netdev, bufsz); + skb = netdev_alloc_skb_ip_align(netdev, bufsz); if (!skb) { /* Better luck next round */ adapter->alloc_rx_buff_failed++; break; } - /* - * Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); - buffer_info->skb = skb; map_skb: buffer_info->dma = pci_map_single(pdev, skb->data, @@ -284,21 +266,14 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, cpu_to_le64(ps_page->dma); } - skb = netdev_alloc_skb(netdev, - adapter->rx_ps_bsize0 + NET_IP_ALIGN); + skb = netdev_alloc_skb_ip_align(netdev, + adapter->rx_ps_bsize0); if (!skb) { adapter->alloc_rx_buff_failed++; break; } - /* - * Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); - buffer_info->skb = skb; buffer_info->dma = pci_map_single(pdev, skb->data, adapter->rx_ps_bsize0, @@ -359,9 +334,7 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info; struct sk_buff *skb; unsigned int i; - unsigned int bufsz = 256 - - 16 /* for skb_reserve */ - - NET_IP_ALIGN; + unsigned int bufsz = 256 - 16 /* for skb_reserve */; i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; @@ -373,19 +346,13 @@ static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter, goto check_page; } - skb = netdev_alloc_skb(netdev, bufsz); + skb = netdev_alloc_skb_ip_align(netdev, bufsz); if (unlikely(!skb)) { /* Better luck next round */ adapter->alloc_rx_buff_failed++; break; } - /* Make buffer alignment 2 beyond a 16 byte boundary - * this will result in a 16 byte aligned IP header after - * the 14 byte MAC header is removed - */ - skb_reserve(skb, NET_IP_ALIGN); - buffer_info->skb = skb; check_page: /* allocate a new page if necessary */ @@ -437,6 +404,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, { struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; + struct e1000_hw *hw = &adapter->hw; struct e1000_ring *rx_ring = adapter->rx_ring; struct e1000_rx_desc *rx_desc, *next_rxd; struct e1000_buffer *buffer_info, *next_buffer; @@ -486,8 +454,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, * packet, also make sure the frame isn't just CRC only */ if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { /* All receives must fit into a single buffer */ - e_dbg("%s: Receive packet consumed multiple buffers\n", - netdev->name); + e_dbg("Receive packet consumed multiple buffers\n"); /* recycle */ buffer_info->skb = skb; goto next_desc; @@ -513,9 +480,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, */ if (length < copybreak) { struct sk_buff *new_skb = - netdev_alloc_skb(netdev, length + NET_IP_ALIGN); + netdev_alloc_skb_ip_align(netdev, length); if (new_skb) { - skb_reserve(new_skb, NET_IP_ALIGN); skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN, (skb->data - @@ -560,33 +526,52 @@ next_desc: adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; - adapter->net_stats.rx_bytes += total_rx_bytes; - adapter->net_stats.rx_packets += total_rx_packets; + netdev->stats.rx_bytes += total_rx_bytes; + netdev->stats.rx_packets += total_rx_packets; return cleaned; } static void e1000_put_txbuf(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info) { - buffer_info->dma = 0; + if (buffer_info->dma) { + if (buffer_info->mapped_as_page) + pci_unmap_page(adapter->pdev, buffer_info->dma, + buffer_info->length, PCI_DMA_TODEVICE); + else + pci_unmap_single(adapter->pdev, buffer_info->dma, + buffer_info->length, + PCI_DMA_TODEVICE); + buffer_info->dma = 0; + } if (buffer_info->skb) { - skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb, - DMA_TO_DEVICE); dev_kfree_skb_any(buffer_info->skb); buffer_info->skb = NULL; } buffer_info->time_stamp = 0; } -static void e1000_print_tx_hang(struct e1000_adapter *adapter) +static void e1000_print_hw_hang(struct work_struct *work) { + struct e1000_adapter *adapter = container_of(work, + struct e1000_adapter, + print_hang_task); struct e1000_ring *tx_ring = adapter->tx_ring; unsigned int i = tx_ring->next_to_clean; unsigned int eop = tx_ring->buffer_info[i].next_to_watch; struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); + struct e1000_hw *hw = &adapter->hw; + u16 phy_status, phy_1000t_status, phy_ext_status; + u16 pci_status; + + e1e_rphy(hw, PHY_STATUS, &phy_status); + e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status); + e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status); + + pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status); - /* detected Tx unit hang */ - e_err("Detected Tx Unit Hang:\n" + /* detected Hardware unit hang */ + e_err("Detected Hardware Unit Hang:\n" " TDH <%x>\n" " TDT <%x>\n" " next_to_use <%x>\n" @@ -595,7 +580,12 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter) " time_stamp <%lx>\n" " next_to_watch <%x>\n" " jiffies <%lx>\n" - " next_to_watch.status <%x>\n", + " next_to_watch.status <%x>\n" + "MAC Status <%x>\n" + "PHY Status <%x>\n" + "PHY 1000BASE-T Status <%x>\n" + "PHY Extended Status <%x>\n" + "PCI Status <%x>\n", readl(adapter->hw.hw_addr + tx_ring->head), readl(adapter->hw.hw_addr + tx_ring->tail), tx_ring->next_to_use, @@ -603,7 +593,12 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter) tx_ring->buffer_info[eop].time_stamp, eop, jiffies, - eop_desc->upper.fields.status); + eop_desc->upper.fields.status, + er32(STATUS), + phy_status, + phy_1000t_status, + phy_ext_status, + pci_status); } /** @@ -677,21 +672,23 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) } if (adapter->detect_tx_hung) { - /* Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i */ + /* + * Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i + */ adapter->detect_tx_hung = 0; if (tx_ring->buffer_info[i].time_stamp && time_after(jiffies, tx_ring->buffer_info[i].time_stamp - + (adapter->tx_timeout_factor * HZ)) - && !(er32(STATUS) & E1000_STATUS_TXOFF)) { - e1000_print_tx_hang(adapter); + + (adapter->tx_timeout_factor * HZ)) && + !(er32(STATUS) & E1000_STATUS_TXOFF)) { + schedule_work(&adapter->print_hang_task); netif_stop_queue(netdev); } } adapter->total_tx_bytes += total_tx_bytes; adapter->total_tx_packets += total_tx_packets; - adapter->net_stats.tx_bytes += total_tx_bytes; - adapter->net_stats.tx_packets += total_tx_packets; + netdev->stats.tx_bytes += total_tx_bytes; + netdev->stats.tx_packets += total_tx_packets; return (count < tx_ring->count); } @@ -705,6 +702,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done, int work_to_do) { + struct e1000_hw *hw = &adapter->hw; union e1000_rx_desc_packet_split *rx_desc, *next_rxd; struct net_device *netdev = adapter->netdev; struct pci_dev *pdev = adapter->pdev; @@ -748,8 +746,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, buffer_info->dma = 0; if (!(staterr & E1000_RXD_STAT_EOP)) { - e_dbg("%s: Packet Split buffers didn't pick up the " - "full packet\n", netdev->name); + e_dbg("Packet Split buffers didn't pick up the full " + "packet\n"); dev_kfree_skb_irq(skb); goto next_desc; } @@ -762,8 +760,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->wb.middle.length0); if (!length) { - e_dbg("%s: Last part of the packet spanning multiple " - "descriptors\n", netdev->name); + e_dbg("Last part of the packet spanning multiple " + "descriptors\n"); dev_kfree_skb_irq(skb); goto next_desc; } @@ -871,8 +869,8 @@ next_desc: adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; - adapter->net_stats.rx_bytes += total_rx_bytes; - adapter->net_stats.rx_packets += total_rx_packets; + netdev->stats.rx_bytes += total_rx_bytes; + netdev->stats.rx_packets += total_rx_packets; return cleaned; } @@ -1051,8 +1049,8 @@ next_desc: adapter->total_rx_bytes += total_rx_bytes; adapter->total_rx_packets += total_rx_packets; - adapter->net_stats.rx_bytes += total_rx_bytes; - adapter->net_stats.rx_packets += total_rx_packets; + netdev->stats.rx_bytes += total_rx_bytes; + netdev->stats.rx_packets += total_rx_packets; return cleaned; } @@ -1199,7 +1197,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (!icr) + if (!icr || test_bit(__E1000_DOWN, &adapter->state)) return IRQ_NONE; /* Not our interrupt */ /* @@ -1481,7 +1479,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter) else memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ); err = request_irq(adapter->msix_entries[vector].vector, - &e1000_intr_msix_rx, 0, adapter->rx_ring->name, + e1000_intr_msix_rx, 0, adapter->rx_ring->name, netdev); if (err) goto out; @@ -1494,7 +1492,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter) else memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ); err = request_irq(adapter->msix_entries[vector].vector, - &e1000_intr_msix_tx, 0, adapter->tx_ring->name, + e1000_intr_msix_tx, 0, adapter->tx_ring->name, netdev); if (err) goto out; @@ -1503,7 +1501,7 @@ static int e1000_request_msix(struct e1000_adapter *adapter) vector++; err = request_irq(adapter->msix_entries[vector].vector, - &e1000_msix_other, 0, netdev->name, netdev); + e1000_msix_other, 0, netdev->name, netdev); if (err) goto out; @@ -1534,7 +1532,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) e1000e_set_interrupt_capability(adapter); } if (adapter->flags & FLAG_MSI_ENABLED) { - err = request_irq(adapter->pdev->irq, &e1000_intr_msi, 0, + err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0, netdev->name, netdev); if (!err) return err; @@ -1544,7 +1542,7 @@ static int e1000_request_irq(struct e1000_adapter *adapter) adapter->int_mode = E1000E_INT_MODE_LEGACY; } - err = request_irq(adapter->pdev->irq, &e1000_intr, IRQF_SHARED, + err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED, netdev->name, netdev); if (err) e_err("Unable to allocate interrupt, Error: %d\n", err); @@ -2040,11 +2038,14 @@ static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid) E1000_MNG_DHCP_COOKIE_STATUS_VLAN) && (vid == adapter->mng_vlan_id)) return; + /* add VID to filter table */ - index = (vid >> 5) & 0x7F; - vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); - vfta |= (1 << (vid & 0x1F)); - e1000e_write_vfta(hw, index, vfta); + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { + index = (vid >> 5) & 0x7F; + vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); + vfta |= (1 << (vid & 0x1F)); + hw->mac.ops.write_vfta(hw, index, vfta); + } } static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) @@ -2069,10 +2070,12 @@ static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) } /* remove VID from filter table */ - index = (vid >> 5) & 0x7F; - vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); - vfta &= ~(1 << (vid & 0x1F)); - e1000e_write_vfta(hw, index, vfta); + if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) { + index = (vid >> 5) & 0x7F; + vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index); + vfta &= ~(1 << (vid & 0x1F)); + hw->mac.ops.write_vfta(hw, index, vfta); + } } static void e1000_update_mng_vlan(struct e1000_adapter *adapter) @@ -2464,8 +2467,6 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) ew32(ITR, 1000000000 / (adapter->itr * 256)); ctrl_ext = er32(CTRL_EXT); - /* Reset delay timers after every interrupt */ - ctrl_ext |= E1000_CTRL_EXT_INT_TIMER_CLR; /* Auto-Mask interrupts upon ICR access */ ctrl_ext |= E1000_CTRL_EXT_IAME; ew32(IAM, 0xffffffff); @@ -2507,21 +2508,23 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) * packet size is equal or larger than the specified value (in 8 byte * units), e.g. using jumbo frames when setting to E1000_ERT_2048 */ - if ((adapter->flags & FLAG_HAS_ERT) && - (adapter->netdev->mtu > ETH_DATA_LEN)) { - u32 rxdctl = er32(RXDCTL(0)); - ew32(RXDCTL(0), rxdctl | 0x3); - ew32(ERT, E1000_ERT_2048 | (1 << 13)); - /* - * With jumbo frames and early-receive enabled, excessive - * C4->C2 latencies result in dropped transactions. - */ - pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, - e1000e_driver_name, 55); - } else { - pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, - e1000e_driver_name, - PM_QOS_DEFAULT_VALUE); + if (adapter->flags & FLAG_HAS_ERT) { + if (adapter->netdev->mtu > ETH_DATA_LEN) { + u32 rxdctl = er32(RXDCTL(0)); + ew32(RXDCTL(0), rxdctl | 0x3); + ew32(ERT, E1000_ERT_2048 | (1 << 13)); + /* + * With jumbo frames and early-receive enabled, + * excessive C-state transition latencies result in + * dropped transactions. + */ + pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, + adapter->netdev->name, 55); + } else { + pm_qos_update_requirement(PM_QOS_CPU_DMA_LATENCY, + adapter->netdev->name, + PM_QOS_DEFAULT_VALUE); + } } /* Enable Receives */ @@ -2645,18 +2648,8 @@ static void e1000_configure(struct e1000_adapter *adapter) **/ void e1000e_power_up_phy(struct e1000_adapter *adapter) { - u16 mii_reg = 0; - - /* Just clear the power down bit to wake the phy back up */ - if (adapter->hw.phy.media_type == e1000_media_type_copper) { - /* - * According to the manual, the phy will retain its - * settings across a power-down/up cycle - */ - e1e_rphy(&adapter->hw, PHY_CONTROL, &mii_reg); - mii_reg &= ~MII_CR_POWER_DOWN; - e1e_wphy(&adapter->hw, PHY_CONTROL, mii_reg); - } + if (adapter->hw.phy.ops.power_up) + adapter->hw.phy.ops.power_up(&adapter->hw); adapter->hw.mac.ops.setup_link(&adapter->hw); } @@ -2664,35 +2657,17 @@ void e1000e_power_up_phy(struct e1000_adapter *adapter) /** * e1000_power_down_phy - Power down the PHY * - * Power down the PHY so no link is implied when interface is down - * The PHY cannot be powered down is management or WoL is active + * Power down the PHY so no link is implied when interface is down. + * The PHY cannot be powered down if management or WoL is active. */ static void e1000_power_down_phy(struct e1000_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; - u16 mii_reg; - /* WoL is enabled */ if (adapter->wol) return; - /* non-copper PHY? */ - if (adapter->hw.phy.media_type != e1000_media_type_copper) - return; - - /* reset is blocked because of a SoL/IDER session */ - if (e1000e_check_mng_mode(hw) || e1000_check_reset_block(hw)) - return; - - /* manageability (AMT) is enabled */ - if (er32(MANC) & E1000_MANC_SMBUS_EN) - return; - - /* power down the PHY */ - e1e_rphy(hw, PHY_CONTROL, &mii_reg); - mii_reg |= MII_CR_POWER_DOWN; - e1e_wphy(hw, PHY_CONTROL, mii_reg); - mdelay(1); + if (adapter->hw.phy.ops.power_down) + adapter->hw.phy.ops.power_down(&adapter->hw); } /** @@ -2769,25 +2744,38 @@ void e1000e_reset(struct e1000_adapter *adapter) /* * flow control settings * - * The high water mark must be low enough to fit two full frame + * The high water mark must be low enough to fit one full frame * (or the size used for early receive) above it in the Rx FIFO. * Set it to the lower of: * - 90% of the Rx FIFO size, and * - the full Rx FIFO size minus the early receive size (for parts * with ERT support assuming ERT set to E1000_ERT_2048), or - * - the full Rx FIFO size minus two full frames + * - the full Rx FIFO size minus one full frame */ - if ((adapter->flags & FLAG_HAS_ERT) && - (adapter->netdev->mtu > ETH_DATA_LEN)) - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (E1000_ERT_2048 << 3))); - else - hwm = min(((pba << 10) * 9 / 10), - ((pba << 10) - (2 * adapter->max_frame_size))); + if (hw->mac.type == e1000_pchlan) { + /* + * Workaround PCH LOM adapter hangs with certain network + * loads. If hangs persist, try disabling Tx flow control. + */ + if (adapter->netdev->mtu > ETH_DATA_LEN) { + fc->high_water = 0x3500; + fc->low_water = 0x1500; + } else { + fc->high_water = 0x5000; + fc->low_water = 0x3000; + } + } else { + if ((adapter->flags & FLAG_HAS_ERT) && + (adapter->netdev->mtu > ETH_DATA_LEN)) + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - (E1000_ERT_2048 << 3))); + else + hwm = min(((pba << 10) * 9 / 10), + ((pba << 10) - adapter->max_frame_size)); - fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ - fc->low_water = (fc->high_water - (2 * adapter->max_frame_size)); - fc->low_water &= E1000_FCRTL_RTL; /* 8-byte granularity */ + fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */ + fc->low_water = fc->high_water - 8; + } if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME) fc->pause_time = 0xFFFF; @@ -2813,6 +2801,10 @@ void e1000e_reset(struct e1000_adapter *adapter) if (mac->ops.init_hw(hw)) e_err("Hardware Error\n"); + /* additional part of the flow-control workaround above */ + if (hw->mac.type == e1000_pchlan) + ew32(FCRTV_PCH, 0x1000); + e1000_update_mng_vlan(adapter); /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ @@ -2839,6 +2831,12 @@ int e1000e_up(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; + /* DMA latency requirement to workaround early-receive/jumbo issue */ + if (adapter->flags & FLAG_HAS_ERT) + pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, + adapter->netdev->name, + PM_QOS_DEFAULT_VALUE); + /* hardware has been reset, we need to reload some things */ e1000_configure(adapter); @@ -2899,6 +2897,10 @@ void e1000e_down(struct e1000_adapter *adapter) e1000_clean_tx_ring(adapter); e1000_clean_rx_ring(adapter); + if (adapter->flags & FLAG_HAS_ERT) + pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, + adapter->netdev->name); + /* * TODO: for power management, we could drop the link and * pci_disable_device here. @@ -2956,7 +2958,7 @@ static irqreturn_t e1000_intr_msi_test(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 icr = er32(ICR); - e_dbg("%s: icr is %08X\n", netdev->name, icr); + e_dbg("icr is %08X\n", icr); if (icr & E1000_ICR_RXSEQ) { adapter->flags &= ~FLAG_MSI_TEST_FAILED; wmb(); @@ -2993,7 +2995,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) if (err) goto msi_test_failed; - err = request_irq(adapter->pdev->irq, &e1000_intr_msi_test, 0, + err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0, netdev->name, netdev); if (err) { pci_disable_msi(adapter->pdev); @@ -3026,7 +3028,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) goto msi_test_failed; /* okay so the test worked, restore settings */ - e_dbg("%s: MSI interrupt test succeeded!\n", netdev->name); + e_dbg("MSI interrupt test succeeded!\n"); msi_test_failed: e1000e_set_interrupt_capability(adapter); e1000_request_irq(adapter); @@ -3287,6 +3289,7 @@ static void e1000_update_phy_info(unsigned long data) **/ void e1000e_update_stats(struct e1000_adapter *adapter) { + struct net_device *netdev = adapter->netdev; struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; u16 phy_data; @@ -3381,8 +3384,8 @@ void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.tsctfc += er32(TSCTFC); /* Fill out the OS statistics structure */ - adapter->net_stats.multicast = adapter->stats.mprc; - adapter->net_stats.collisions = adapter->stats.colc; + netdev->stats.multicast = adapter->stats.mprc; + netdev->stats.collisions = adapter->stats.colc; /* Rx Errors */ @@ -3390,22 +3393,22 @@ void e1000e_update_stats(struct e1000_adapter *adapter) * RLEC on some newer hardware can be incorrect so build * our own version based on RUC and ROC */ - adapter->net_stats.rx_errors = adapter->stats.rxerrc + + netdev->stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + adapter->stats.ruc + adapter->stats.roc + adapter->stats.cexterr; - adapter->net_stats.rx_length_errors = adapter->stats.ruc + + netdev->stats.rx_length_errors = adapter->stats.ruc + adapter->stats.roc; - adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; - adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; - adapter->net_stats.rx_missed_errors = adapter->stats.mpc; + netdev->stats.rx_crc_errors = adapter->stats.crcerrs; + netdev->stats.rx_frame_errors = adapter->stats.algnerrc; + netdev->stats.rx_missed_errors = adapter->stats.mpc; /* Tx Errors */ - adapter->net_stats.tx_errors = adapter->stats.ecol + + netdev->stats.tx_errors = adapter->stats.ecol + adapter->stats.latecol; - adapter->net_stats.tx_aborted_errors = adapter->stats.ecol; - adapter->net_stats.tx_window_errors = adapter->stats.latecol; - adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs; + netdev->stats.tx_aborted_errors = adapter->stats.ecol; + netdev->stats.tx_window_errors = adapter->stats.latecol; + netdev->stats.tx_carrier_errors = adapter->stats.tncrs; /* Tx Dropped needs to be maintained elsewhere */ @@ -3610,7 +3613,7 @@ static void e1000_watchdog_task(struct work_struct *work) case SPEED_100: txb2b = 0; netdev->tx_queue_len = 100; - /* maybe add some timeout factor ? */ + adapter->tx_timeout_factor = 10; break; } @@ -3759,68 +3762,64 @@ static int e1000_tso(struct e1000_adapter *adapter, u8 ipcss, ipcso, tucss, tucso, hdr_len; int err; - if (skb_is_gso(skb)) { - if (skb_header_cloned(skb)) { - err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); - if (err) - return err; - } + if (!skb_is_gso(skb)) + return 0; - hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); - mss = skb_shinfo(skb)->gso_size; - if (skb->protocol == htons(ETH_P_IP)) { - struct iphdr *iph = ip_hdr(skb); - iph->tot_len = 0; - iph->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, - iph->daddr, 0, - IPPROTO_TCP, - 0); - cmd_length = E1000_TXD_CMD_IP; - ipcse = skb_transport_offset(skb) - 1; - } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { - ipv6_hdr(skb)->payload_len = 0; - tcp_hdr(skb)->check = - ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, - 0, IPPROTO_TCP, 0); - ipcse = 0; - } - ipcss = skb_network_offset(skb); - ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data; - tucss = skb_transport_offset(skb); - tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; - tucse = 0; + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) + return err; + } - cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | - E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); + hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb); + mss = skb_shinfo(skb)->gso_size; + if (skb->protocol == htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr, + 0, IPPROTO_TCP, 0); + cmd_length = E1000_TXD_CMD_IP; + ipcse = skb_transport_offset(skb) - 1; + } else if (skb_shinfo(skb)->gso_type == SKB_GSO_TCPV6) { + ipv6_hdr(skb)->payload_len = 0; + tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + ipcse = 0; + } + ipcss = skb_network_offset(skb); + ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data; + tucss = skb_transport_offset(skb); + tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data; + tucse = 0; - i = tx_ring->next_to_use; - context_desc = E1000_CONTEXT_DESC(*tx_ring, i); - buffer_info = &tx_ring->buffer_info[i]; + cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | + E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); - context_desc->lower_setup.ip_fields.ipcss = ipcss; - context_desc->lower_setup.ip_fields.ipcso = ipcso; - context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); - context_desc->upper_setup.tcp_fields.tucss = tucss; - context_desc->upper_setup.tcp_fields.tucso = tucso; - context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse); - context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); - context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; - context_desc->cmd_and_length = cpu_to_le32(cmd_length); + i = tx_ring->next_to_use; + context_desc = E1000_CONTEXT_DESC(*tx_ring, i); + buffer_info = &tx_ring->buffer_info[i]; - buffer_info->time_stamp = jiffies; - buffer_info->next_to_watch = i; + context_desc->lower_setup.ip_fields.ipcss = ipcss; + context_desc->lower_setup.ip_fields.ipcso = ipcso; + context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse); + context_desc->upper_setup.tcp_fields.tucss = tucss; + context_desc->upper_setup.tcp_fields.tucso = tucso; + context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse); + context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss); + context_desc->tcp_seg_setup.fields.hdr_len = hdr_len; + context_desc->cmd_and_length = cpu_to_le32(cmd_length); - i++; - if (i == tx_ring->count) - i = 0; - tx_ring->next_to_use = i; + buffer_info->time_stamp = jiffies; + buffer_info->next_to_watch = i; - return 1; - } + i++; + if (i == tx_ring->count) + i = 0; + tx_ring->next_to_use = i; - return 0; + return 1; } static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) @@ -3892,23 +3891,14 @@ static int e1000_tx_map(struct e1000_adapter *adapter, unsigned int mss) { struct e1000_ring *tx_ring = adapter->tx_ring; + struct pci_dev *pdev = adapter->pdev; struct e1000_buffer *buffer_info; unsigned int len = skb_headlen(skb); - unsigned int offset, size, count = 0, i; + unsigned int offset = 0, size, count = 0, i; unsigned int f; - dma_addr_t *map; i = tx_ring->next_to_use; - if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) { - dev_err(&adapter->pdev->dev, "TX DMA map failed\n"); - adapter->tx_dma_failed++; - return 0; - } - - map = skb_shinfo(skb)->dma_maps; - offset = 0; - while (len) { buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); @@ -3916,11 +3906,15 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info->length = size; buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; - buffer_info->dma = skb_shinfo(skb)->dma_head + offset; - count++; + buffer_info->dma = pci_map_single(pdev, skb->data + offset, + size, PCI_DMA_TODEVICE); + buffer_info->mapped_as_page = false; + if (pci_dma_mapping_error(pdev, buffer_info->dma)) + goto dma_error; len -= size; offset += size; + count++; if (len) { i++; @@ -3934,7 +3928,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter, frag = &skb_shinfo(skb)->frags[f]; len = frag->size; - offset = 0; + offset = frag->page_offset; while (len) { i++; @@ -3947,7 +3941,12 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info->length = size; buffer_info->time_stamp = jiffies; buffer_info->next_to_watch = i; - buffer_info->dma = map[f] + offset; + buffer_info->dma = pci_map_page(pdev, frag->page, + offset, size, + PCI_DMA_TODEVICE); + buffer_info->mapped_as_page = true; + if (pci_dma_mapping_error(pdev, buffer_info->dma)) + goto dma_error; len -= size; offset += size; @@ -3959,6 +3958,22 @@ static int e1000_tx_map(struct e1000_adapter *adapter, tx_ring->buffer_info[first].next_to_watch = i; return count; + +dma_error: + dev_err(&pdev->dev, "TX DMA map failed\n"); + buffer_info->dma = 0; + count--; + + while (count >= 0) { + count--; + i--; + if (i < 0) + i += tx_ring->count; + buffer_info = &tx_ring->buffer_info[i]; + e1000_put_txbuf(adapter, buffer_info);; + } + + return 0; } static void e1000_tx_queue(struct e1000_adapter *adapter, @@ -4031,8 +4046,8 @@ static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter, u16 length, offset; if (vlan_tx_tag_present(skb)) { - if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) - && (adapter->hw.mng_cookie.status & + if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && + (adapter->hw.mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN))) return 0; } @@ -4254,10 +4269,8 @@ static void e1000_reset_task(struct work_struct *work) **/ static struct net_device_stats *e1000_get_stats(struct net_device *netdev) { - struct e1000_adapter *adapter = netdev_priv(netdev); - /* only return the current stats */ - return &adapter->net_stats; + return &netdev->stats; } /** @@ -4288,8 +4301,10 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) msleep(1); - /* e1000e_down has a dependency on max_frame_size */ + /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */ adapter->max_frame_size = max_frame; + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); + netdev->mtu = new_mtu; if (netif_running(netdev)) e1000e_down(adapter); @@ -4319,9 +4334,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; - e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); - netdev->mtu = new_mtu; - if (netif_running(netdev)) e1000e_up(adapter); else @@ -4346,6 +4358,8 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, data->phy_id = adapter->hw.phy.addr; break; case SIOCGMIIREG: + e1000_phy_read_status(adapter); + switch (data->reg_num & 0x1F) { case MII_BMCR: data->val_out = adapter->phy_regs.bmcr; @@ -4453,7 +4467,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) e1e_wphy(&adapter->hw, BM_WUC, E1000_WUC_PME_EN); /* activate PHY wakeup */ - retval = hw->phy.ops.acquire_phy(hw); + retval = hw->phy.ops.acquire(hw); if (retval) { e_err("Could not acquire PHY\n"); return retval; @@ -4470,7 +4484,7 @@ static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc) if (retval) e_err("Could not set PHY Host Wakeup bit\n"); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return retval; } @@ -5144,6 +5158,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task); INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround); INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task); + INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang); /* Initialize link parameters. User can change them with ethtool */ adapter->hw.mac.autoneg = 1; @@ -5267,19 +5282,24 @@ static void __devexit e1000_remove(struct pci_dev *pdev) del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); + cancel_work_sync(&adapter->reset_task); + cancel_work_sync(&adapter->watchdog_task); + cancel_work_sync(&adapter->downshift_task); + cancel_work_sync(&adapter->update_phy_task); + cancel_work_sync(&adapter->print_hang_task); flush_scheduled_work(); + if (!(netdev->flags & IFF_UP)) + e1000_power_down_phy(adapter); + + unregister_netdev(netdev); + /* * Release control of h/w to f/w. If f/w is AMT enabled, this * would have already happened in close and is redundant. */ e1000_release_hw_control(adapter); - unregister_netdev(netdev); - - if (!e1000_check_reset_block(&adapter->hw)) - e1000_phy_hw_reset(&adapter->hw); - e1000e_reset_interrupt_capability(adapter); kfree(adapter->tx_ring); kfree(adapter->rx_ring); @@ -5345,6 +5365,7 @@ static struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan }, @@ -5398,12 +5419,10 @@ static int __init e1000_init_module(void) int ret; printk(KERN_INFO "%s: Intel(R) PRO/1000 Network Driver - %s\n", e1000e_driver_name, e1000e_driver_version); - printk(KERN_INFO "%s: Copyright (c) 1999-2008 Intel Corporation.\n", + printk(KERN_INFO "%s: Copyright (c) 1999 - 2009 Intel Corporation.\n", e1000e_driver_name); ret = pci_register_driver(&e1000_driver); - pm_qos_add_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name, - PM_QOS_DEFAULT_VALUE); - + return ret; } module_init(e1000_init_module); @@ -5417,7 +5436,6 @@ module_init(e1000_init_module); static void __exit e1000_exit_module(void) { pci_unregister_driver(&e1000_driver); - pm_qos_remove_requirement(PM_QOS_CPU_DMA_LATENCY, e1000e_driver_name); } module_exit(e1000_exit_module); diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 1342e0b1815..2e399778cae 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 03175b3a2c9..55a2c0acfee 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -1,7 +1,7 @@ /******************************************************************************* Intel PRO/1000 Linux driver - Copyright(c) 1999 - 2008 Intel Corporation. + Copyright(c) 1999 - 2009 Intel Corporation. This program is free software; you can redistribute it and/or modify it under the terms and conditions of the GNU General Public License, @@ -44,6 +44,8 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, /* Cable length tables */ static const u16 e1000_m88_cable_length_table[] = { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; +#define M88E1000_CABLE_LENGTH_TABLE_SIZE \ + ARRAY_SIZE(e1000_m88_cable_length_table) static const u16 e1000_igp_2_cable_length_table[] = { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, @@ -71,7 +73,6 @@ static const u16 e1000_igp_2_cable_length_table[] = #define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) #define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ #define I82577_CTRL_REG 23 -#define I82577_CTRL_DOWNSHIFT_MASK (7 << 10) /* 82577 specific PHY registers */ #define I82577_PHY_CTRL_2 18 @@ -131,7 +132,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) u16 phy_id; u16 retry_count = 0; - if (!(phy->ops.read_phy_reg)) + if (!(phy->ops.read_reg)) goto out; while (retry_count < 2) { @@ -152,29 +153,29 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw) goto out; /* - * If the PHY ID is still unknown, we may have an 82577i - * without link. We will try again after setting Slow - * MDIC mode. No harm in trying again in this case since - * the PHY ID is unknown at this point anyway + * If the PHY ID is still unknown, we may have an 82577 + * without link. We will try again after setting Slow MDIC + * mode. No harm in trying again in this case since the PHY + * ID is unknown at this point anyway. */ - ret_val = phy->ops.acquire_phy(hw); + ret_val = phy->ops.acquire(hw); if (ret_val) goto out; ret_val = e1000_set_mdio_slow_mode_hv(hw, true); if (ret_val) goto out; - phy->ops.release_phy(hw); + phy->ops.release(hw); retry_count++; } out: /* Revert to MDIO fast mode, if applicable */ if (retry_count) { - ret_val = phy->ops.acquire_phy(hw); + ret_val = phy->ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000_set_mdio_slow_mode_hv(hw, false); - phy->ops.release_phy(hw); + phy->ops.release(hw); } return ret_val; @@ -212,7 +213,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) u32 i, mdic = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -239,11 +240,11 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Read did not complete\n"); + e_dbg("MDI Read did not complete\n"); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } *data = (u16) mdic; @@ -265,7 +266,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) u32 i, mdic = 0; if (offset > MAX_PHY_REG_ADDRESS) { - hw_dbg(hw, "PHY Address %d is out of range\n", offset); + e_dbg("PHY Address %d is out of range\n", offset); return -E1000_ERR_PARAM; } @@ -293,11 +294,11 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) break; } if (!(mdic & E1000_MDIC_READY)) { - hw_dbg(hw, "MDI Write did not complete\n"); + e_dbg("MDI Write did not complete\n"); return -E1000_ERR_PHY; } if (mdic & E1000_MDIC_ERROR) { - hw_dbg(hw, "MDI Error\n"); + e_dbg("MDI Error\n"); return -E1000_ERR_PHY; } @@ -318,14 +319,14 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) { s32 ret_val; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -343,14 +344,14 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) { s32 ret_val; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -372,10 +373,10 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, s32 ret_val = 0; if (!locked) { - if (!(hw->phy.ops.acquire_phy)) + if (!(hw->phy.ops.acquire)) goto out; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; } @@ -393,7 +394,7 @@ static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, release: if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; } @@ -443,10 +444,10 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, s32 ret_val = 0; if (!locked) { - if (!(hw->phy.ops.acquire_phy)) + if (!(hw->phy.ops.acquire)) goto out; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; } @@ -464,7 +465,7 @@ static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, release: if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; @@ -516,10 +517,10 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, s32 ret_val = 0; if (!locked) { - if (!(hw->phy.ops.acquire_phy)) + if (!(hw->phy.ops.acquire)) goto out; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; } @@ -534,7 +535,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, *data = (u16)kmrnctrlsta; if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; @@ -588,10 +589,10 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, s32 ret_val = 0; if (!locked) { - if (!(hw->phy.ops.acquire_phy)) + if (!(hw->phy.ops.acquire)) goto out; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) goto out; } @@ -603,7 +604,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, udelay(2); if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); out: return ret_val; @@ -650,7 +651,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) u16 phy_data; /* Enable CRS on TX. This must be set for half-duplex operation. */ - ret_val = phy->ops.read_phy_reg(hw, I82577_CFG_REG, &phy_data); + ret_val = phy->ops.read_reg(hw, I82577_CFG_REG, &phy_data); if (ret_val) goto out; @@ -659,16 +660,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) /* Enable downshift */ phy_data |= I82577_CFG_ENABLE_DOWNSHIFT; - ret_val = phy->ops.write_phy_reg(hw, I82577_CFG_REG, phy_data); - if (ret_val) - goto out; - - /* Set number of link attempts before downshift */ - ret_val = phy->ops.read_phy_reg(hw, I82577_CTRL_REG, &phy_data); - if (ret_val) - goto out; - phy_data &= ~I82577_CTRL_DOWNSHIFT_MASK; - ret_val = phy->ops.write_phy_reg(hw, I82577_CTRL_REG, phy_data); + ret_val = phy->ops.write_reg(hw, I82577_CFG_REG, phy_data); out: return ret_val; @@ -786,12 +778,12 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) /* Commit the changes. */ ret_val = e1000e_commit_phy(hw); if (ret_val) { - hw_dbg(hw, "Error committing the PHY changes\n"); + e_dbg("Error committing the PHY changes\n"); return ret_val; } if (phy->type == e1000_phy_82578) { - ret_val = phy->ops.read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); if (ret_val) return ret_val; @@ -799,7 +791,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw) /* 82578 PHY - set the downshift count to 1x. */ phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE; phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK; - ret_val = phy->ops.write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, + ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); if (ret_val) return ret_val; @@ -823,7 +815,7 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) ret_val = e1000_phy_hw_reset(hw); if (ret_val) { - hw_dbg(hw, "Error resetting the PHY.\n"); + e_dbg("Error resetting the PHY.\n"); return ret_val; } @@ -834,9 +826,9 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw) msleep(100); /* disable lplu d0 during driver init */ - ret_val = e1000_set_d0_lplu_state(hw, 0); + ret_val = e1000_set_d0_lplu_state(hw, false); if (ret_val) { - hw_dbg(hw, "Error Disabling LPLU D0\n"); + e_dbg("Error Disabling LPLU D0\n"); return ret_val; } /* Configure mdi-mdix settings */ @@ -972,39 +964,39 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) NWAY_AR_10T_HD_CAPS); mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); - hw_dbg(hw, "autoneg_advertised %x\n", phy->autoneg_advertised); + e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised); /* Do we want to advertise 10 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_HALF) { - hw_dbg(hw, "Advertise 10mb Half duplex\n"); + e_dbg("Advertise 10mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS; } /* Do we want to advertise 10 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_10_FULL) { - hw_dbg(hw, "Advertise 10mb Full duplex\n"); + e_dbg("Advertise 10mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS; } /* Do we want to advertise 100 Mb Half Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_HALF) { - hw_dbg(hw, "Advertise 100mb Half duplex\n"); + e_dbg("Advertise 100mb Half duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS; } /* Do we want to advertise 100 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_100_FULL) { - hw_dbg(hw, "Advertise 100mb Full duplex\n"); + e_dbg("Advertise 100mb Full duplex\n"); mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS; } /* We do not allow the Phy to advertise 1000 Mb Half Duplex */ if (phy->autoneg_advertised & ADVERTISE_1000_HALF) - hw_dbg(hw, "Advertise 1000mb Half duplex request denied!\n"); + e_dbg("Advertise 1000mb Half duplex request denied!\n"); /* Do we want to advertise 1000 Mb Full Duplex? */ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) { - hw_dbg(hw, "Advertise 1000mb Full duplex\n"); + e_dbg("Advertise 1000mb Full duplex\n"); mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS; } @@ -1063,7 +1055,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE); break; default: - hw_dbg(hw, "Flow control param set incorrectly\n"); + e_dbg("Flow control param set incorrectly\n"); ret_val = -E1000_ERR_CONFIG; return ret_val; } @@ -1072,7 +1064,7 @@ static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); + e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); if (phy->autoneg_mask & ADVERTISE_1000_FULL) { ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); @@ -1109,13 +1101,13 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_advertised == 0) phy->autoneg_advertised = phy->autoneg_mask; - hw_dbg(hw, "Reconfiguring auto-neg advertisement params\n"); + e_dbg("Reconfiguring auto-neg advertisement params\n"); ret_val = e1000_phy_setup_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error Setting up Auto-Negotiation\n"); + e_dbg("Error Setting up Auto-Negotiation\n"); return ret_val; } - hw_dbg(hw, "Restarting Auto-Neg\n"); + e_dbg("Restarting Auto-Neg\n"); /* * Restart auto-negotiation by setting the Auto Neg Enable bit and @@ -1137,7 +1129,7 @@ static s32 e1000_copper_link_autoneg(struct e1000_hw *hw) if (phy->autoneg_wait_to_complete) { ret_val = e1000_wait_autoneg(hw); if (ret_val) { - hw_dbg(hw, "Error while waiting for " + e_dbg("Error while waiting for " "autoneg to complete\n"); return ret_val; } @@ -1175,10 +1167,10 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) * PHY will be set to 10H, 10F, 100H or 100F * depending on user settings. */ - hw_dbg(hw, "Forcing Speed and Duplex\n"); + e_dbg("Forcing Speed and Duplex\n"); ret_val = e1000_phy_force_speed_duplex(hw); if (ret_val) { - hw_dbg(hw, "Error Forcing Speed and Duplex\n"); + e_dbg("Error Forcing Speed and Duplex\n"); return ret_val; } } @@ -1195,11 +1187,11 @@ s32 e1000e_setup_copper_link(struct e1000_hw *hw) return ret_val; if (link) { - hw_dbg(hw, "Valid link established!!!\n"); + e_dbg("Valid link established!!!\n"); e1000e_config_collision_dist(hw); ret_val = e1000e_config_fc_after_link_up(hw); } else { - hw_dbg(hw, "Unable to establish link!!!\n"); + e_dbg("Unable to establish link!!!\n"); } return ret_val; @@ -1245,12 +1237,12 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "IGP PSCR: %X\n", phy_data); + e_dbg("IGP PSCR: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on IGP phy.\n"); + e_dbg("Waiting for forced speed/duplex link on IGP phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -1260,7 +1252,7 @@ s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw) return ret_val; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -1304,7 +1296,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) if (ret_val) return ret_val; - hw_dbg(hw, "M88E1000 PSCR: %X\n", phy_data); + e_dbg("M88E1000 PSCR: %X\n", phy_data); ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data); if (ret_val) @@ -1322,7 +1314,7 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n"); + e_dbg("Waiting for forced speed/duplex link on M88 phy.\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, 100000, &link); @@ -1330,17 +1322,22 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; if (!link) { - /* - * We didn't get link. - * Reset the DSP and cross our fingers. - */ - ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT, - 0x001d); - if (ret_val) - return ret_val; - ret_val = e1000e_phy_reset_dsp(hw); - if (ret_val) - return ret_val; + if (hw->phy.type != e1000_phy_m88) { + e_dbg("Link taking longer than expected.\n"); + } else { + /* + * We didn't get link. + * Reset the DSP and cross our fingers. + */ + ret_val = e1e_wphy(hw, + M88E1000_PHY_PAGE_SELECT, + 0x001d); + if (ret_val) + return ret_val; + ret_val = e1000e_phy_reset_dsp(hw); + if (ret_val) + return ret_val; + } } /* Try once more */ @@ -1350,6 +1347,9 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) return ret_val; } + if (hw->phy.type != e1000_phy_m88) + return 0; + ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); if (ret_val) return ret_val; @@ -1379,6 +1379,73 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) } /** + * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex + * @hw: pointer to the HW structure + * + * Forces the speed and duplex settings of the PHY. + * This is a function pointer entry point only called by + * PHY setup routines. + **/ +s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + ret_val = e1e_rphy(hw, PHY_CONTROL, &data); + if (ret_val) + goto out; + + e1000e_phy_force_speed_duplex_setup(hw, &data); + + ret_val = e1e_wphy(hw, PHY_CONTROL, data); + if (ret_val) + goto out; + + /* Disable MDI-X support for 10/100 */ + ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + goto out; + + data &= ~IFE_PMC_AUTO_MDIX; + data &= ~IFE_PMC_FORCE_MDIX; + + ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data); + if (ret_val) + goto out; + + e_dbg("IFE PMC: %X\n", data); + + udelay(1); + + if (phy->autoneg_wait_to_complete) { + e_dbg("Waiting for forced speed/duplex link on IFE phy.\n"); + + ret_val = e1000e_phy_has_link_generic(hw, + PHY_FORCE_LIMIT, + 100000, + &link); + if (ret_val) + goto out; + + if (!link) + e_dbg("Link taking longer than expected.\n"); + + /* Try once more */ + ret_val = e1000e_phy_has_link_generic(hw, + PHY_FORCE_LIMIT, + 100000, + &link); + if (ret_val) + goto out; + } + +out: + return ret_val; +} + +/** * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex * @hw: pointer to the HW structure * @phy_ctrl: pointer to current value of PHY_CONTROL @@ -1413,11 +1480,11 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) { ctrl &= ~E1000_CTRL_FD; *phy_ctrl &= ~MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Half Duplex\n"); + e_dbg("Half Duplex\n"); } else { ctrl |= E1000_CTRL_FD; *phy_ctrl |= MII_CR_FULL_DUPLEX; - hw_dbg(hw, "Full Duplex\n"); + e_dbg("Full Duplex\n"); } /* Forcing 10mb or 100mb? */ @@ -1425,12 +1492,12 @@ void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl) ctrl |= E1000_CTRL_SPD_100; *phy_ctrl |= MII_CR_SPEED_100; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10); - hw_dbg(hw, "Forcing 100mb\n"); + e_dbg("Forcing 100mb\n"); } else { ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100); *phy_ctrl |= MII_CR_SPEED_10; *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100); - hw_dbg(hw, "Forcing 10mb\n"); + e_dbg("Forcing 10mb\n"); } e1000e_config_collision_dist(hw); @@ -1533,8 +1600,8 @@ s32 e1000e_check_downshift(struct e1000_hw *hw) switch (phy->type) { case e1000_phy_m88: case e1000_phy_gg82563: + case e1000_phy_bm: case e1000_phy_82578: - case e1000_phy_82577: offset = M88E1000_PHY_SPEC_STATUS; mask = M88E1000_PSSR_DOWNSHIFT; break; @@ -1545,7 +1612,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw) break; default: /* speed downshift not supported */ - phy->speed_downgraded = 0; + phy->speed_downgraded = false; return 0; } @@ -1565,7 +1632,7 @@ s32 e1000e_check_downshift(struct e1000_hw *hw) * * Polarity is determined based on the PHY specific status register. **/ -static s32 e1000_check_polarity_m88(struct e1000_hw *hw) +s32 e1000_check_polarity_m88(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val; @@ -1590,7 +1657,7 @@ static s32 e1000_check_polarity_m88(struct e1000_hw *hw) * Polarity is determined based on the PHY port status register, and the * current speed (since there is no polarity at 100Mbps). **/ -static s32 e1000_check_polarity_igp(struct e1000_hw *hw) +s32 e1000_check_polarity_igp(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; s32 ret_val; @@ -1628,6 +1695,39 @@ static s32 e1000_check_polarity_igp(struct e1000_hw *hw) } /** + * e1000_check_polarity_ife - Check cable polarity for IFE PHY + * @hw: pointer to the HW structure + * + * Polarity is determined on the polarity reversal feature being enabled. + **/ +s32 e1000_check_polarity_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 phy_data, offset, mask; + + /* + * Polarity is determined based on the reversal feature being enabled. + */ + if (phy->polarity_correction) { + offset = IFE_PHY_EXTENDED_STATUS_CONTROL; + mask = IFE_PESC_POLARITY_REVERSED; + } else { + offset = IFE_PHY_SPECIAL_CONTROL; + mask = IFE_PSC_FORCE_POLARITY; + } + + ret_val = e1e_rphy(hw, offset, &phy_data); + + if (!ret_val) + phy->cable_polarity = (phy_data & mask) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; + + return ret_val; +} + +/** * e1000_wait_autoneg - Wait for auto-neg completion * @hw: pointer to the HW structure * @@ -1727,15 +1827,21 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); if (ret_val) - return ret_val; + goto out; index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT; + M88E1000_PSSR_CABLE_LENGTH_SHIFT; + if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) { + ret_val = -E1000_ERR_PHY; + goto out; + } + phy->min_cable_length = e1000_m88_cable_length_table[index]; - phy->max_cable_length = e1000_m88_cable_length_table[index+1]; + phy->max_cable_length = e1000_m88_cable_length_table[index + 1]; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; +out: return ret_val; } @@ -1746,7 +1852,7 @@ s32 e1000e_get_cable_length_m88(struct e1000_hw *hw) * The automatic gain control (agc) normalizes the amplitude of the * received signal, adjusting for the attenuation produced by the * cable. By reading the AGC registers, which represent the - * combination of course and fine gain value, the value can be put + * combination of coarse and fine gain value, the value can be put * into a lookup table to obtain the approximate cable length * for each channel. **/ @@ -1771,7 +1877,7 @@ s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw) /* * Getting bits 15:9, which represent the combination of - * course and fine gain values. The result is a number + * coarse and fine gain values. The result is a number * that can be put into the lookup table to obtain the * approximate cable length. */ @@ -1825,8 +1931,8 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) u16 phy_data; bool link; - if (hw->phy.media_type != e1000_media_type_copper) { - hw_dbg(hw, "Phy info is only valid for copper media\n"); + if (phy->media_type != e1000_media_type_copper) { + e_dbg("Phy info is only valid for copper media\n"); return -E1000_ERR_CONFIG; } @@ -1835,7 +1941,7 @@ s32 e1000e_get_phy_info_m88(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } @@ -1903,11 +2009,11 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) return ret_val; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); return -E1000_ERR_CONFIG; } - phy->polarity_correction = 1; + phy->polarity_correction = true; ret_val = e1000_check_polarity_igp(hw); if (ret_val) @@ -1946,6 +2052,61 @@ s32 e1000e_get_phy_info_igp(struct e1000_hw *hw) } /** + * e1000_get_phy_info_ife - Retrieves various IFE PHY states + * @hw: pointer to the HW structure + * + * Populates "phy" structure with various feature states. + **/ +s32 e1000_get_phy_info_ife(struct e1000_hw *hw) +{ + struct e1000_phy_info *phy = &hw->phy; + s32 ret_val; + u16 data; + bool link; + + ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link); + if (ret_val) + goto out; + + if (!link) { + e_dbg("Phy info is only valid if link is up\n"); + ret_val = -E1000_ERR_CONFIG; + goto out; + } + + ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data); + if (ret_val) + goto out; + phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE) + ? false : true; + + if (phy->polarity_correction) { + ret_val = e1000_check_polarity_ife(hw); + if (ret_val) + goto out; + } else { + /* Polarity is forced */ + phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY) + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; + } + + ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data); + if (ret_val) + goto out; + + phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false; + + /* The following parameters are undefined for 10/100 operation. */ + phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; + phy->local_rx = e1000_1000t_rx_status_undefined; + phy->remote_rx = e1000_1000t_rx_status_undefined; + +out: + return ret_val; +} + +/** * e1000e_phy_sw_reset - PHY software reset * @hw: pointer to the HW structure * @@ -1990,7 +2151,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) if (ret_val) return 0; - ret_val = phy->ops.acquire_phy(hw); + ret_val = phy->ops.acquire(hw); if (ret_val) return ret_val; @@ -2005,7 +2166,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw) udelay(150); - phy->ops.release_phy(hw); + phy->ops.release(hw); return e1000_get_phy_cfg_done(hw); } @@ -2031,7 +2192,7 @@ s32 e1000e_get_cfg_done(struct e1000_hw *hw) **/ s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw) { - hw_dbg(hw, "Running IGP 3 PHY init script\n"); + e_dbg("Running IGP 3 PHY init script\n"); /* PHY init IGP 3 */ /* Enable rise/fall, 10-mode work in class-A */ @@ -2199,28 +2360,34 @@ enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id) s32 e1000e_determine_phy_address(struct e1000_hw *hw) { s32 ret_val = -E1000_ERR_PHY_TYPE; - u32 phy_addr= 0; - u32 i = 0; + u32 phy_addr = 0; + u32 i; enum e1000_phy_type phy_type = e1000_phy_unknown; - do { - for (phy_addr = 0; phy_addr < 4; phy_addr++) { - hw->phy.addr = phy_addr; + hw->phy.id = phy_type; + + for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) { + hw->phy.addr = phy_addr; + i = 0; + + do { e1000e_get_phy_id(hw); phy_type = e1000e_get_phy_type_from_id(hw->phy.id); - /* + /* * If phy_type is valid, break - we found our * PHY address */ if (phy_type != e1000_phy_unknown) { ret_val = 0; - break; + goto out; } - } - i++; - } while ((ret_val != 0) && (i < 100)); + msleep(1); + i++; + } while (i < 10); + } +out: return ret_val; } @@ -2256,7 +2423,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -2294,7 +2461,7 @@ s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data) data); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2315,7 +2482,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) u32 page = offset >> IGP_PAGE_SHIFT; u32 page_shift = 0; - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -2352,7 +2519,7 @@ s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2371,7 +2538,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -2397,7 +2564,7 @@ s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data) ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, data); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2415,7 +2582,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) s32 ret_val; u16 page = (u16)(offset >> IGP_PAGE_SHIFT); - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; @@ -2441,7 +2608,7 @@ s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data) data); out: - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2474,7 +2641,7 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Gig must be disabled for MDIO accesses to page 800 */ if ((hw->mac.type == e1000_pchlan) && (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE))) - hw_dbg(hw, "Attempting to access page 800 while gig enabled\n"); + e_dbg("Attempting to access page 800 while gig enabled.\n"); /* All operations in this function are phy address 1 */ hw->phy.addr = 1; @@ -2484,20 +2651,26 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, (BM_WUC_ENABLE_PAGE << IGP_PAGE_SHIFT)); ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, &phy_reg); - if (ret_val) + if (ret_val) { + e_dbg("Could not read PHY page 769\n"); goto out; + } /* First clear bit 4 to avoid a power state change */ phy_reg &= ~(BM_WUC_HOST_WU_BIT); ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); - if (ret_val) + if (ret_val) { + e_dbg("Could not clear PHY page 769 bit 4\n"); goto out; + } /* Write bit 2 = 1, and clear bit 4 to 769_17 */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg | BM_WUC_ENABLE_BIT); - if (ret_val) + if (ret_val) { + e_dbg("Could not write PHY page 769 bit 2\n"); goto out; + } /* Select page 800 */ ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, @@ -2505,21 +2678,25 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Write the page 800 offset value using opcode 0x11 */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg); - if (ret_val) + if (ret_val) { + e_dbg("Could not write address opcode to page 800\n"); goto out; + } if (read) { /* Read the page 800 value using opcode 0x12 */ ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE, data); } else { - /* Read the page 800 value using opcode 0x12 */ + /* Write the page 800 value using opcode 0x12 */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE, *data); } - if (ret_val) + if (ret_val) { + e_dbg("Could not access data value from page 800\n"); goto out; + } /* * Restore 769_17.2 to its original value @@ -2530,12 +2707,53 @@ static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset, /* Clear 769_17.2 */ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg); + if (ret_val) { + e_dbg("Could not clear PHY page 769 bit 2\n"); + goto out; + } out: return ret_val; } /** + * e1000_power_up_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_up_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + e1e_rphy(hw, PHY_CONTROL, &mii_reg); + mii_reg &= ~MII_CR_POWER_DOWN; + e1e_wphy(hw, PHY_CONTROL, mii_reg); +} + +/** + * e1000_power_down_phy_copper - Restore copper link in case of PHY power down + * @hw: pointer to the HW structure + * + * In the case of a PHY power down to save power, or to turn off link during a + * driver unload, or wake on lan is not enabled, restore the link to previous + * settings. + **/ +void e1000_power_down_phy_copper(struct e1000_hw *hw) +{ + u16 mii_reg = 0; + + /* The PHY will retain its settings across a power down/up cycle */ + e1e_rphy(hw, PHY_CONTROL, &mii_reg); + mii_reg |= MII_CR_POWER_DOWN; + e1e_wphy(hw, PHY_CONTROL, mii_reg); + msleep(1); +} + +/** * e1000e_commit_phy - Soft PHY reset * @hw: pointer to the HW structure * @@ -2544,8 +2762,8 @@ out: **/ s32 e1000e_commit_phy(struct e1000_hw *hw) { - if (hw->phy.ops.commit_phy) - return hw->phy.ops.commit_phy(hw); + if (hw->phy.ops.commit) + return hw->phy.ops.commit(hw); return 0; } @@ -2624,7 +2842,7 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, bool in_slow_mode = false; if (!locked) { - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; } @@ -2658,19 +2876,18 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, page = 0; if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; - - hw->phy.addr = 1; - - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - hw->phy.addr = phy_addr; - } + u32 phy_addr = hw->phy.addr; + + hw->phy.addr = 1; + + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, @@ -2678,10 +2895,10 @@ static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data, out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2734,7 +2951,7 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, bool in_slow_mode = false; if (!locked) { - ret_val = hw->phy.ops.acquire_phy(hw); + ret_val = hw->phy.ops.acquire(hw); if (ret_val) return ret_val; } @@ -2784,19 +3001,18 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, } if (reg > MAX_PHY_MULTI_PAGE_REG) { - if ((hw->phy.type != e1000_phy_82578) || - ((reg != I82578_ADDR_REG) && - (reg != I82578_ADDR_REG + 1))) { - u32 phy_addr = hw->phy.addr; - - hw->phy.addr = 1; - - /* Page is shifted left, PHY expects (page x 32) */ - ret_val = e1000e_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (page << IGP_PAGE_SHIFT)); - hw->phy.addr = phy_addr; - } + u32 phy_addr = hw->phy.addr; + + hw->phy.addr = 1; + + /* Page is shifted left, PHY expects (page x 32) */ + ret_val = e1000e_write_phy_reg_mdic(hw, + IGP01E1000_PHY_PAGE_SELECT, + (page << IGP_PAGE_SHIFT)); + hw->phy.addr = phy_addr; + + if (ret_val) + goto out; } ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg, @@ -2805,10 +3021,10 @@ static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data, out: /* Revert to MDIO fast mode, if applicable */ if ((hw->phy.type == e1000_phy_82577) && in_slow_mode) - ret_val = e1000_set_mdio_slow_mode_hv(hw, false); + ret_val |= e1000_set_mdio_slow_mode_hv(hw, false); if (!locked) - hw->phy.ops.release_phy(hw); + hw->phy.ops.release(hw); return ret_val; } @@ -2884,7 +3100,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, /* masking with 0x3F to remove the page from offset */ ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F); if (ret_val) { - hw_dbg(hw, "Could not write PHY the HV address register\n"); + e_dbg("Could not write PHY the HV address register\n"); goto out; } @@ -2895,7 +3111,7 @@ static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data); if (ret_val) { - hw_dbg(hw, "Could not read data value from HV data register\n"); + e_dbg("Could not read data value from HV data register\n"); goto out; } @@ -2923,12 +3139,12 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) goto out; /* Do not apply workaround if in PHY loopback bit 14 set */ - hw->phy.ops.read_phy_reg(hw, PHY_CONTROL, &data); + hw->phy.ops.read_reg(hw, PHY_CONTROL, &data); if (data & PHY_CONTROL_LB) goto out; /* check if link is up and at 1Gbps */ - ret_val = hw->phy.ops.read_phy_reg(hw, BM_CS_STATUS, &data); + ret_val = hw->phy.ops.read_reg(hw, BM_CS_STATUS, &data); if (ret_val) goto out; @@ -2944,13 +3160,13 @@ s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw) mdelay(200); /* flush the packets in the fifo buffer */ - ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL, + ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC | HV_MUX_DATA_CTRL_FORCE_SPEED); if (ret_val) goto out; - ret_val = hw->phy.ops.write_phy_reg(hw, HV_MUX_DATA_CTRL, + ret_val = hw->phy.ops.write_reg(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC); out: @@ -2971,7 +3187,7 @@ s32 e1000_check_polarity_82577(struct e1000_hw *hw) s32 ret_val; u16 data; - ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data); + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); if (!ret_val) phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY) @@ -2996,13 +3212,13 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) u16 phy_data; bool link; - ret_val = phy->ops.read_phy_reg(hw, PHY_CONTROL, &phy_data); + ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data); if (ret_val) goto out; e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - ret_val = phy->ops.write_phy_reg(hw, PHY_CONTROL, phy_data); + ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data); if (ret_val) goto out; @@ -3010,23 +3226,23 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) * Clear Auto-Crossover to force MDI manually. 82577 requires MDI * forced whenever speed and duplex are forced. */ - ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_CTRL_2, &phy_data); + ret_val = phy->ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); if (ret_val) goto out; phy_data &= ~I82577_PHY_CTRL2_AUTO_MDIX; phy_data &= ~I82577_PHY_CTRL2_FORCE_MDI_MDIX; - ret_val = phy->ops.write_phy_reg(hw, I82577_PHY_CTRL_2, phy_data); + ret_val = phy->ops.write_reg(hw, I82577_PHY_CTRL_2, phy_data); if (ret_val) goto out; - hw_dbg(hw, "I82577_PHY_CTRL_2: %X\n", phy_data); + e_dbg("I82577_PHY_CTRL_2: %X\n", phy_data); udelay(1); if (phy->autoneg_wait_to_complete) { - hw_dbg(hw, "Waiting for forced speed/duplex link on 82577 phy\n"); + e_dbg("Waiting for forced speed/duplex link on 82577 phy\n"); ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT, @@ -3036,7 +3252,7 @@ s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw) goto out; if (!link) - hw_dbg(hw, "Link taking longer than expected.\n"); + e_dbg("Link taking longer than expected.\n"); /* Try once more */ ret_val = e1000e_phy_has_link_generic(hw, @@ -3072,7 +3288,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) goto out; if (!link) { - hw_dbg(hw, "Phy info is only valid if link is up\n"); + e_dbg("Phy info is only valid if link is up\n"); ret_val = -E1000_ERR_CONFIG; goto out; } @@ -3083,7 +3299,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) goto out; - ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_STATUS_2, &data); + ret_val = phy->ops.read_reg(hw, I82577_PHY_STATUS_2, &data); if (ret_val) goto out; @@ -3095,7 +3311,7 @@ s32 e1000_get_phy_info_82577(struct e1000_hw *hw) if (ret_val) goto out; - ret_val = phy->ops.read_phy_reg(hw, PHY_1000T_STATUS, &data); + ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data); if (ret_val) goto out; @@ -3129,7 +3345,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw) s32 ret_val; u16 phy_data, length; - ret_val = phy->ops.read_phy_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); + ret_val = phy->ops.read_reg(hw, I82577_PHY_DIAG_STATUS, &phy_data); if (ret_val) goto out; @@ -3137,7 +3353,7 @@ s32 e1000_get_cable_length_82577(struct e1000_hw *hw) I82577_DSTATUS_CABLE_LENGTH_SHIFT; if (length == E1000_CABLE_LENGTH_UNDEFINED) - ret_val = E1000_ERR_PHY; + ret_val = -E1000_ERR_PHY; phy->cable_length = length; |