diff options
Diffstat (limited to 'drivers/net/e1000e')
-rw-r--r-- | drivers/net/e1000e/82571.c | 273 | ||||
-rw-r--r-- | drivers/net/e1000e/defines.h | 1 | ||||
-rw-r--r-- | drivers/net/e1000e/e1000.h | 4 | ||||
-rw-r--r-- | drivers/net/e1000e/ethtool.c | 3 | ||||
-rw-r--r-- | drivers/net/e1000e/hw.h | 11 | ||||
-rw-r--r-- | drivers/net/e1000e/ich8lan.c | 17 | ||||
-rw-r--r-- | drivers/net/e1000e/lib.c | 66 | ||||
-rw-r--r-- | drivers/net/e1000e/netdev.c | 261 |
8 files changed, 407 insertions, 229 deletions
diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 0890162953e..6c01a2072c8 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -40,6 +40,7 @@ * 82573E Gigabit Ethernet Controller (Copper) * 82573L Gigabit Ethernet Controller * 82574L Gigabit Network Connection + * 82583V Gigabit Network Connection */ #include <linux/netdevice.h> @@ -61,6 +62,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw); static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw); static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw); +static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw); static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw); @@ -99,6 +101,7 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) phy->type = e1000_phy_m88; break; case e1000_82574: + case e1000_82583: phy->type = e1000_phy_bm; break; default: @@ -121,6 +124,7 @@ static s32 e1000_init_phy_params_82571(struct e1000_hw *hw) return -E1000_ERR_PHY; break; case e1000_82574: + case e1000_82583: if (phy->id != BME1000_E_PHY_ID_R2) return -E1000_ERR_PHY; break; @@ -164,6 +168,7 @@ static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw) switch (hw->mac.type) { case e1000_82573: case e1000_82574: + case e1000_82583: if (((eecd >> 15) & 0x3) == 0x3) { nvm->type = e1000_nvm_flash_hw; nvm->word_size = 2048; @@ -250,7 +255,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) case e1000_media_type_internal_serdes: func->setup_physical_interface = e1000_setup_fiber_serdes_link_82571; - func->check_for_link = e1000e_check_for_serdes_link; + func->check_for_link = e1000_check_for_serdes_link_82571; func->get_link_up_info = e1000e_get_speed_and_duplex_fiber_serdes; break; @@ -261,6 +266,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) switch (hw->mac.type) { case e1000_82574: + case e1000_82583: func->check_mng_mode = e1000_check_mng_mode_82574; func->led_on = e1000_led_on_82574; break; @@ -374,6 +380,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw) return e1000e_get_phy_id(hw); break; case e1000_82574: + case e1000_82583: ret_val = e1e_rphy(hw, PHY_ID1, &phy_id); if (ret_val) return ret_val; @@ -463,8 +470,15 @@ static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw) if (ret_val) return ret_val; - if (hw->mac.type != e1000_82573 && hw->mac.type != e1000_82574) + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + break; + default: ret_val = e1000e_acquire_nvm(hw); + break; + } if (ret_val) e1000_put_hw_semaphore_82571(hw); @@ -504,6 +518,7 @@ static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words, switch (hw->mac.type) { case e1000_82573: case e1000_82574: + case e1000_82583: ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data); break; case e1000_82571: @@ -778,7 +793,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) * Must acquire the MDIO ownership before MAC reset. * Ownership defaults to firmware after a reset. */ - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: extcnf_ctrl = er32(EXTCNF_CTRL); extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; @@ -794,6 +812,9 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) msleep(2); i++; } while (i < MDIO_OWNERSHIP_TIMEOUT); + break; + default: + break; } ctrl = er32(CTRL); @@ -819,8 +840,16 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) * Need to wait for Phy configuration completion before accessing * NVM and Phy. */ - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) + + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: msleep(25); + break; + default: + break; + } /* Clear any pending interrupt events. */ ew32(IMC, 0xffffffff); @@ -830,6 +859,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw) hw->dev_spec.e82571.alt_mac_addr_is_present) e1000e_set_laa_state_82571(hw, true); + /* Reinitialize the 82571 serdes link state machine */ + if (hw->phy.media_type == e1000_media_type_internal_serdes) + hw->mac.serdes_link_state = e1000_serdes_link_down; + return 0; } @@ -886,17 +919,22 @@ static s32 e1000_init_hw_82571(struct e1000_hw *hw) ew32(TXDCTL(0), reg_data); /* ...for both queues. */ - if (mac->type != e1000_82573 && mac->type != e1000_82574) { + switch (mac->type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + e1000e_enable_tx_pkt_filtering(hw); + reg_data = er32(GCR); + reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; + ew32(GCR, reg_data); + break; + default: reg_data = er32(TXDCTL(1)); reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC; ew32(TXDCTL(1), reg_data); - } else { - e1000e_enable_tx_pkt_filtering(hw); - reg_data = er32(GCR); - reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX; - ew32(GCR, reg_data); + break; } /* @@ -961,18 +999,30 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) } /* Device Control */ - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: reg = er32(CTRL); reg &= ~(1 << 29); ew32(CTRL, reg); + break; + default: + break; } /* Extended Device Control */ - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: reg = er32(CTRL_EXT); reg &= ~(1 << 23); reg |= (1 << 22); ew32(CTRL_EXT, reg); + break; + default: + break; } if (hw->mac.type == e1000_82571) { @@ -980,9 +1030,23 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg |= E1000_PBA_ECC_CORR_EN; ew32(PBA_ECC, reg); } + /* + * Workaround for hardware errata. + * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572 + */ + + if ((hw->mac.type == e1000_82571) || + (hw->mac.type == e1000_82572)) { + reg = er32(CTRL_EXT); + reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN; + ew32(CTRL_EXT, reg); + } + /* PCI-Ex Control Registers */ - if (hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82574: + case e1000_82583: reg = er32(GCR); reg |= (1 << 22); ew32(GCR, reg); @@ -990,6 +1054,9 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) reg = er32(GCR2); reg |= 1; ew32(GCR2, reg); + break; + default: + break; } return; @@ -1009,7 +1076,10 @@ void e1000e_clear_vfta(struct e1000_hw *hw) u32 vfta_offset = 0; u32 vfta_bit_in_reg = 0; - if (hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) { + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: if (hw->mng_cookie.vlan_id != 0) { /* * The VFTA is a 4096b bit-field, each identifying @@ -1024,6 +1094,9 @@ void e1000e_clear_vfta(struct e1000_hw *hw) vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & E1000_VFTA_ENTRY_BIT_SHIFT_MASK); } + break; + default: + break; } for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { /* @@ -1122,9 +1195,16 @@ static s32 e1000_setup_link_82571(struct e1000_hw *hw) * the default flow control setting, so we explicitly * set it to full. */ - if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) && - hw->fc.requested_mode == e1000_fc_default) - hw->fc.requested_mode = e1000_fc_full; + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + if (hw->fc.requested_mode == e1000_fc_default) + hw->fc.requested_mode = e1000_fc_full; + break; + default: + break; + } return e1000e_setup_link(hw); } @@ -1203,6 +1283,131 @@ static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw) } /** + * e1000_check_for_serdes_link_82571 - Check for link (Serdes) + * @hw: pointer to the HW structure + * + * Checks for link up on the hardware. If link is not up and we have + * a signal, then we need to force link up. + **/ +static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + u32 rxcw; + u32 ctrl; + u32 status; + s32 ret_val = 0; + + ctrl = er32(CTRL); + status = er32(STATUS); + rxcw = er32(RXCW); + + if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) { + + /* Receiver is synchronized with no invalid bits. */ + switch (mac->serdes_link_state) { + case e1000_serdes_link_autoneg_complete: + if (!(status & E1000_STATUS_LU)) { + /* + * We have lost link, retry autoneg before + * reporting link failure + */ + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + hw_dbg(hw, "AN_UP -> AN_PROG\n"); + } + break; + + case e1000_serdes_link_forced_up: + /* + * If we are receiving /C/ ordered sets, re-enable + * auto-negotiation in the TXCW register and disable + * forced link in the Device Control register in an + * attempt to auto-negotiate with our link partner. + */ + if (rxcw & E1000_RXCW_C) { + /* Enable autoneg, and unforce link up */ + ew32(TXCW, mac->txcw); + ew32(CTRL, + (ctrl & ~E1000_CTRL_SLU)); + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + hw_dbg(hw, "FORCED_UP -> AN_PROG\n"); + } + break; + + case e1000_serdes_link_autoneg_progress: + /* + * If the LU bit is set in the STATUS register, + * autoneg has completed sucessfully. If not, + * try foring the link because the far end may be + * available but not capable of autonegotiation. + */ + if (status & E1000_STATUS_LU) { + mac->serdes_link_state = + e1000_serdes_link_autoneg_complete; + hw_dbg(hw, "AN_PROG -> AN_UP\n"); + } else { + /* + * Disable autoneg, force link up and + * full duplex, and change state to forced + */ + ew32(TXCW, + (mac->txcw & ~E1000_TXCW_ANE)); + ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD); + ew32(CTRL, ctrl); + + /* Configure Flow Control after link up. */ + ret_val = + e1000e_config_fc_after_link_up(hw); + if (ret_val) { + hw_dbg(hw, "Error config flow control\n"); + break; + } + mac->serdes_link_state = + e1000_serdes_link_forced_up; + hw_dbg(hw, "AN_PROG -> FORCED_UP\n"); + } + mac->serdes_has_link = true; + break; + + case e1000_serdes_link_down: + default: + /* The link was down but the receiver has now gained + * valid sync, so lets see if we can bring the link + * up. */ + ew32(TXCW, mac->txcw); + ew32(CTRL, + (ctrl & ~E1000_CTRL_SLU)); + mac->serdes_link_state = + e1000_serdes_link_autoneg_progress; + hw_dbg(hw, "DOWN -> AN_PROG\n"); + break; + } + } else { + if (!(rxcw & E1000_RXCW_SYNCH)) { + mac->serdes_has_link = false; + mac->serdes_link_state = e1000_serdes_link_down; + hw_dbg(hw, "ANYSTATE -> DOWN\n"); + } else { + /* + * We have sync, and can tolerate one + * invalid (IV) codeword before declaring + * link down, so reread to look again + */ + udelay(10); + rxcw = er32(RXCW); + if (rxcw & E1000_RXCW_IV) { + mac->serdes_link_state = e1000_serdes_link_down; + mac->serdes_has_link = false; + hw_dbg(hw, "ANYSTATE -> DOWN\n"); + } + } + } + + return ret_val; +} + +/** * e1000_valid_led_default_82571 - Verify a valid default LED config * @hw: pointer to the HW structure * @data: pointer to the NVM (EEPROM) @@ -1220,11 +1425,19 @@ static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data) return ret_val; } - if ((hw->mac.type == e1000_82573 || hw->mac.type == e1000_82574) && - *data == ID_LED_RESERVED_F746) - *data = ID_LED_DEFAULT_82573; - else if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) - *data = ID_LED_DEFAULT; + switch (hw->mac.type) { + case e1000_82573: + case e1000_82574: + case e1000_82583: + if (*data == ID_LED_RESERVED_F746) + *data = ID_LED_DEFAULT_82573; + break; + default: + if (*data == ID_LED_RESERVED_0000 || + *data == ID_LED_RESERVED_FFFF) + *data = ID_LED_DEFAULT; + break; + } return 0; } @@ -1517,3 +1730,19 @@ struct e1000_info e1000_82574_info = { .nvm_ops = &e82571_nvm_ops, }; +struct e1000_info e1000_82583_info = { + .mac = e1000_82583, + .flags = FLAG_HAS_HW_VLAN_FILTER + | FLAG_HAS_WOL + | FLAG_APME_IN_CTRL3 + | FLAG_RX_CSUM_ENABLED + | FLAG_HAS_SMART_POWER_DOWN + | FLAG_HAS_AMT + | FLAG_HAS_CTRLEXT_ON_LOAD, + .pba = 20, + .get_variants = e1000_get_variants_82571, + .mac_ops = &e82571_mac_ops, + .phy_ops = &e82_phy_ops_bm, + .nvm_ops = &e82571_nvm_ops, +}; + diff --git a/drivers/net/e1000e/defines.h b/drivers/net/e1000e/defines.h index e6caf29d425..243aa499fe9 100644 --- a/drivers/net/e1000e/defines.h +++ b/drivers/net/e1000e/defines.h @@ -69,6 +69,7 @@ #define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Definable Pin 7 */ #define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ #define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */ #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 #define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 #define E1000_CTRL_EXT_EIAME 0x01000000 diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 37bcb190eef..f37360aa12a 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -101,6 +101,7 @@ enum e1000_boards { board_82572, board_82573, board_82574, + board_82583, board_80003es2lan, board_ich8lan, board_ich9lan, @@ -195,8 +196,6 @@ struct e1000_adapter { u16 link_duplex; u16 eeprom_vers; - spinlock_t tx_queue_lock; /* prevent concurrent tail updates */ - /* track device up/down/testing state */ unsigned long state; @@ -401,6 +400,7 @@ extern struct e1000_info e1000_82571_info; extern struct e1000_info e1000_82572_info; extern struct e1000_info e1000_82573_info; extern struct e1000_info e1000_82574_info; +extern struct e1000_info e1000_82583_info; extern struct e1000_info e1000_ich8_info; extern struct e1000_info e1000_ich9_info; extern struct e1000_info e1000_ich10_info; diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index e48956d924b..4d25ede8836 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -790,6 +790,7 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) break; case e1000_82573: case e1000_82574: + case e1000_82583: case e1000_ich8lan: case e1000_ich9lan: case e1000_ich10lan: @@ -1589,7 +1590,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data) *data = 0; if (hw->phy.media_type == e1000_media_type_internal_serdes) { int i = 0; - hw->mac.serdes_has_link = 0; + hw->mac.serdes_has_link = false; /* * On some blade server designs, link establishment diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 2d4ce0492df..d8b82296f41 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -339,6 +339,8 @@ enum e1e_registers { #define E1000_DEV_ID_82573E_IAMT 0x108C #define E1000_DEV_ID_82573L 0x109A #define E1000_DEV_ID_82574L 0x10D3 +#define E1000_DEV_ID_82574LA 0x10F6 +#define E1000_DEV_ID_82583V 0x150C #define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096 #define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098 @@ -376,6 +378,7 @@ enum e1000_mac_type { e1000_82572, e1000_82573, e1000_82574, + e1000_82583, e1000_80003es2lan, e1000_ich8lan, e1000_ich9lan, @@ -459,6 +462,13 @@ enum e1000_smart_speed { e1000_smart_speed_off }; +enum e1000_serdes_link_state { + e1000_serdes_link_down = 0, + e1000_serdes_link_autoneg_progress, + e1000_serdes_link_autoneg_complete, + e1000_serdes_link_forced_up +}; + /* Receive Descriptor */ struct e1000_rx_desc { __le64 buffer_addr; /* Address of the descriptor's data buffer */ @@ -787,6 +797,7 @@ struct e1000_mac_info { bool in_ifs_mode; bool serdes_has_link; bool tx_pkt_filtering; + enum e1000_serdes_link_state serdes_link_state; }; struct e1000_phy_info { diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index e415e81ecd3..6d1aab6316b 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -390,8 +390,6 @@ static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) } static DEFINE_MUTEX(nvm_mutex); -static pid_t nvm_owner_pid = -1; -static char nvm_owner_name[TASK_COMM_LEN] = ""; /** * e1000_acquire_swflag_ich8lan - Acquire software control flag @@ -408,16 +406,7 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) might_sleep(); - if (!mutex_trylock(&nvm_mutex)) { - WARN(1, KERN_ERR "e1000e mutex contention. Owned by process " - "%s (pid %d), required by process %s (pid %d)\n", - nvm_owner_name, nvm_owner_pid, - current->comm, current->pid); - - mutex_lock(&nvm_mutex); - } - nvm_owner_pid = current->pid; - strncpy(nvm_owner_name, current->comm, TASK_COMM_LEN); + mutex_lock(&nvm_mutex); while (timeout) { extcnf_ctrl = er32(EXTCNF_CTRL); @@ -435,8 +424,6 @@ static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw) hw_dbg(hw, "FW or HW has locked the resource for too long.\n"); extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); - nvm_owner_pid = -1; - strcpy(nvm_owner_name, ""); mutex_unlock(&nvm_mutex); return -E1000_ERR_CONFIG; } @@ -460,8 +447,6 @@ static void e1000_release_swflag_ich8lan(struct e1000_hw *hw) extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG; ew32(EXTCNF_CTRL, extcnf_ctrl); - nvm_owner_pid = -1; - strcpy(nvm_owner_name, ""); mutex_unlock(&nvm_mutex); } diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 66741104ffd..18a4f5902f3 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -159,41 +159,6 @@ void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) } /** - * e1000_mta_set - Set multicast filter table address - * @hw: pointer to the HW structure - * @hash_value: determines the MTA register and bit to set - * - * The multicast table address is a register array of 32-bit registers. - * The hash_value is used to determine what register the bit is in, the - * current value is read, the new bit is OR'd in and the new value is - * written back into the register. - **/ -static void e1000_mta_set(struct e1000_hw *hw, u32 hash_value) -{ - u32 hash_bit, hash_reg, mta; - - /* - * The MTA is a register array of 32-bit registers. It is - * treated like an array of (32*mta_reg_count) bits. We want to - * set bit BitArray[hash_value]. So we figure out what register - * the bit is in, read it, OR in the new bit, then write - * back the new value. The (hw->mac.mta_reg_count - 1) serves as a - * mask to bits 31:5 of the hash value which gives us the - * register we're modifying. The hash bit within that register - * is determined by the lower 5 bits of the hash value. - */ - hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); - hash_bit = hash_value & 0x1F; - - mta = E1000_READ_REG_ARRAY(hw, E1000_MTA, hash_reg); - - mta |= (1 << hash_bit); - - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, hash_reg, mta); - e1e_flush(); -} - -/** * e1000_hash_mc_addr - Generate a multicast hash value * @hw: pointer to the HW structure * @mc_addr: pointer to a multicast address @@ -281,8 +246,13 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, u8 *mc_addr_list, u32 mc_addr_count, u32 rar_used_count, u32 rar_count) { - u32 hash_value; u32 i; + u32 *mcarray = kzalloc(hw->mac.mta_reg_count * sizeof(u32), GFP_ATOMIC); + + if (!mcarray) { + printk(KERN_ERR "multicast array memory allocation failed\n"); + return; + } /* * Load the first set of multicast addresses into the exact @@ -302,20 +272,24 @@ void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw, } } - /* Clear the old settings from the MTA */ - hw_dbg(hw, "Clearing MTA\n"); - for (i = 0; i < hw->mac.mta_reg_count; i++) { - E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0); - e1e_flush(); - } - /* Load any remaining multicast addresses into the hash table. */ for (; mc_addr_count > 0; mc_addr_count--) { + u32 hash_value, hash_reg, hash_bit, mta; hash_value = e1000_hash_mc_addr(hw, mc_addr_list); hw_dbg(hw, "Hash value = 0x%03X\n", hash_value); - e1000_mta_set(hw, hash_value); + hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1); + hash_bit = hash_value & 0x1F; + mta = (1 << hash_bit); + mcarray[hash_reg] |= mta; mc_addr_list += ETH_ALEN; } + + /* write the hash table completely */ + for (i = 0; i < hw->mac.mta_reg_count; i++) + E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, mcarray[i]); + + e1e_flush(); + kfree(mcarray); } /** @@ -501,7 +475,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); - mac->serdes_has_link = 1; + mac->serdes_has_link = true; } return 0; @@ -566,7 +540,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); - mac->serdes_has_link = 1; + mac->serdes_has_link = true; } else if (!(E1000_TXCW_ANE & er32(TXCW))) { /* * If we force link for non-auto-negotiation switch, check diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 91817d0afca..bfb2d6c85c5 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -44,10 +44,11 @@ #include <linux/cpu.h> #include <linux/smp.h> #include <linux/pm_qos_params.h> +#include <linux/aer.h> #include "e1000.h" -#define DRV_VERSION "0.3.3.3-k6" +#define DRV_VERSION "0.3.3.4-k4" char e1000e_driver_name[] = "e1000e"; const char e1000e_driver_version[] = DRV_VERSION; @@ -56,6 +57,7 @@ static const struct e1000_info *e1000_info_tbl[] = { [board_82572] = &e1000_82572_info, [board_82573] = &e1000_82573_info, [board_82574] = &e1000_82574_info, + [board_82583] = &e1000_82583_info, [board_80003es2lan] = &e1000_es2_info, [board_ich8lan] = &e1000_ich8_info, [board_ich9lan] = &e1000_ich9_info, @@ -99,8 +101,8 @@ static void e1000_receive_skb(struct e1000_adapter *adapter, skb->protocol = eth_type_trans(skb, netdev); if (adapter->vlgrp && (status & E1000_RXD_STAT_VP)) - vlan_hwaccel_receive_skb(skb, adapter->vlgrp, - le16_to_cpu(vlan)); + vlan_gro_receive(&adapter->napi, adapter->vlgrp, + le16_to_cpu(vlan), skb); else napi_gro_receive(&adapter->napi, skb); } @@ -565,15 +567,14 @@ next_desc: static void e1000_put_txbuf(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info) { - if (buffer_info->dma) { - pci_unmap_page(adapter->pdev, buffer_info->dma, - buffer_info->length, PCI_DMA_TODEVICE); - buffer_info->dma = 0; - } + buffer_info->dma = 0; if (buffer_info->skb) { + skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb, + DMA_TO_DEVICE); dev_kfree_skb_any(buffer_info->skb); buffer_info->skb = NULL; } + buffer_info->time_stamp = 0; } static void e1000_print_tx_hang(struct e1000_adapter *adapter) @@ -620,15 +621,16 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) struct e1000_buffer *buffer_info; unsigned int i, eop; unsigned int count = 0; - bool cleaned = 0; + bool cleaned; unsigned int total_tx_bytes = 0, total_tx_packets = 0; i = tx_ring->next_to_clean; eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); - while (eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - for (cleaned = 0; !cleaned; ) { + while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && + (count < tx_ring->count)) { + for (cleaned = 0; !cleaned; count++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); @@ -654,10 +656,6 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) eop = tx_ring->buffer_info[i].next_to_watch; eop_desc = E1000_TX_DESC(*tx_ring, eop); -#define E1000_TX_WEIGHT 64 - /* weight of a sort for tx, to avoid endless transmit cleanup */ - if (count++ == E1000_TX_WEIGHT) - break; } tx_ring->next_to_clean = i; @@ -678,13 +676,11 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) } if (adapter->detect_tx_hung) { - /* - * Detect a transmit hang in hardware, this serializes the - * check with the clearing of time_stamp and movement of i - */ + /* Detect a transmit hang in hardware, this serializes the + * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = 0; - if (tx_ring->buffer_info[eop].dma && - time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + if (tx_ring->buffer_info[i].time_stamp && + time_after(jiffies, tx_ring->buffer_info[i].time_stamp + (adapter->tx_timeout_factor * HZ)) && !(er32(STATUS) & E1000_STATUS_TXOFF)) { e1000_print_tx_hang(adapter); @@ -695,7 +691,7 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter) adapter->total_tx_packets += total_tx_packets; adapter->net_stats.tx_bytes += total_tx_bytes; adapter->net_stats.tx_packets += total_tx_packets; - return cleaned; + return (count < tx_ring->count); } /** @@ -1152,7 +1148,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) * read ICR disables interrupts using IAM */ - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + if (icr & E1000_ICR_LSC) { hw->mac.get_link_status = 1; /* * ICH8 workaround-- Call gig speed drop workaround on cable @@ -1179,12 +1175,12 @@ static irqreturn_t e1000_intr_msi(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } - if (netif_rx_schedule_prep(&adapter->napi)) { + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; - __netif_rx_schedule(&adapter->napi); + __napi_schedule(&adapter->napi); } return IRQ_HANDLED; @@ -1218,7 +1214,7 @@ static irqreturn_t e1000_intr(int irq, void *data) * IMC write */ - if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) { + if (icr & E1000_ICR_LSC) { hw->mac.get_link_status = 1; /* * ICH8 workaround-- Call gig speed drop workaround on cable @@ -1246,12 +1242,12 @@ static irqreturn_t e1000_intr(int irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } - if (netif_rx_schedule_prep(&adapter->napi)) { + if (napi_schedule_prep(&adapter->napi)) { adapter->total_tx_bytes = 0; adapter->total_tx_packets = 0; adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; - __netif_rx_schedule(&adapter->napi); + __napi_schedule(&adapter->napi); } return IRQ_HANDLED; @@ -1265,7 +1261,8 @@ static irqreturn_t e1000_msix_other(int irq, void *data) u32 icr = er32(ICR); if (!(icr & E1000_ICR_INT_ASSERTED)) { - ew32(IMS, E1000_IMS_OTHER); + if (!test_bit(__E1000_DOWN, &adapter->state)) + ew32(IMS, E1000_IMS_OTHER); return IRQ_NONE; } @@ -1282,7 +1279,8 @@ static irqreturn_t e1000_msix_other(int irq, void *data) } no_link_interrupt: - ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER); + if (!test_bit(__E1000_DOWN, &adapter->state)) + ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER); return IRQ_HANDLED; } @@ -1320,10 +1318,10 @@ static irqreturn_t e1000_intr_msix_rx(int irq, void *data) adapter->rx_ring->set_itr = 0; } - if (netif_rx_schedule_prep(&adapter->napi)) { + if (napi_schedule_prep(&adapter->napi)) { adapter->total_rx_bytes = 0; adapter->total_rx_packets = 0; - __netif_rx_schedule(&adapter->napi); + __napi_schedule(&adapter->napi); } return IRQ_HANDLED; } @@ -1698,7 +1696,6 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter) tx_ring->next_to_use = 0; tx_ring->next_to_clean = 0; - spin_lock_init(&adapter->tx_queue_lock); return 0; err: @@ -2007,32 +2004,25 @@ static int e1000_clean(struct napi_struct *napi, int budget) !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val)) goto clean_rx; - /* - * e1000_clean is called per-cpu. This lock protects - * tx_ring from being cleaned by multiple cpus - * simultaneously. A failure obtaining the lock means - * tx_ring is currently being cleaned anyway. - */ - if (spin_trylock(&adapter->tx_queue_lock)) { - tx_cleaned = e1000_clean_tx_irq(adapter); - spin_unlock(&adapter->tx_queue_lock); - } + tx_cleaned = e1000_clean_tx_irq(adapter); clean_rx: adapter->clean_rx(adapter, &work_done, budget); - if (tx_cleaned) + if (!tx_cleaned) work_done = budget; /* If budget not fully consumed, exit the polling mode */ if (work_done < budget) { if (adapter->itr_setting & 3) e1000_set_itr(adapter); - netif_rx_complete(napi); - if (adapter->msix_entries) - ew32(IMS, adapter->rx_ring->ims_val); - else - e1000_irq_enable(adapter); + napi_complete(napi); + if (!test_bit(__E1000_DOWN, &adapter->state)) { + if (adapter->msix_entries) + ew32(IMS, adapter->rx_ring->ims_val); + else + e1000_irq_enable(adapter); + } } return work_done; @@ -2922,8 +2912,6 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) if (e1000_alloc_queues(adapter)) return -ENOMEM; - spin_lock_init(&adapter->tx_queue_lock); - /* Explicitly disable IRQ since the NIC can be in any state. */ e1000_irq_disable(adapter); @@ -3320,7 +3308,7 @@ void e1000e_update_stats(struct e1000_adapter *adapter) adapter->stats.algnerrc += er32(ALGNERRC); adapter->stats.rxerrc += er32(RXERRC); - if (hw->mac.type != e1000_82574) + if ((hw->mac.type != e1000_82574) && (hw->mac.type != e1000_82583)) adapter->stats.tncrs += er32(TNCRS); adapter->stats.cexterr += er32(CEXTERR); adapter->stats.tsctc += er32(TSCTC); @@ -3777,23 +3765,30 @@ static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb) unsigned int i; u8 css; u32 cmd_len = E1000_TXD_CMD_DEXT; + __be16 protocol; if (skb->ip_summed != CHECKSUM_PARTIAL) return 0; - switch (skb->protocol) { - case __constant_htons(ETH_P_IP): + if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) + protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto; + else + protocol = skb->protocol; + + switch (protocol) { + case cpu_to_be16(ETH_P_IP): if (ip_hdr(skb)->protocol == IPPROTO_TCP) cmd_len |= E1000_TXD_CMD_TCP; break; - case __constant_htons(ETH_P_IPV6): + case cpu_to_be16(ETH_P_IPV6): /* XXX not handling all IPV6 headers */ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) cmd_len |= E1000_TXD_CMD_TCP; break; default: if (unlikely(net_ratelimit())) - e_warn("checksum_partial proto=%x!\n", skb->protocol); + e_warn("checksum_partial proto=%x!\n", + be16_to_cpu(protocol)); break; } @@ -3832,42 +3827,40 @@ static int e1000_tx_map(struct e1000_adapter *adapter, { struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_buffer *buffer_info; - unsigned int len = skb->len - skb->data_len; - unsigned int offset = 0, size, count = 0, i; + unsigned int len = skb_headlen(skb); + unsigned int offset, size, count = 0, i; unsigned int f; + dma_addr_t *map; i = tx_ring->next_to_use; + if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) { + dev_err(&adapter->pdev->dev, "TX DMA map failed\n"); + adapter->tx_dma_failed++; + return 0; + } + + map = skb_shinfo(skb)->dma_maps; + offset = 0; + while (len) { buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); - /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ - if (mss && !nr_frags && size == len && size > 8) - size -= 4; - buffer_info->length = size; - /* set time_stamp *before* dma to help avoid a possible race */ buffer_info->time_stamp = jiffies; - buffer_info->dma = - pci_map_single(adapter->pdev, - skb->data + offset, - size, - PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(adapter->pdev, buffer_info->dma)) { - dev_err(&adapter->pdev->dev, "TX DMA map failed\n"); - adapter->tx_dma_failed++; - return -1; - } buffer_info->next_to_watch = i; + buffer_info->dma = map[0] + offset; + count++; len -= size; offset += size; - count++; - i++; - if (i == tx_ring->count) - i = 0; + + if (len) { + i++; + if (i == tx_ring->count) + i = 0; + } } for (f = 0; f < nr_frags; f++) { @@ -3875,49 +3868,27 @@ static int e1000_tx_map(struct e1000_adapter *adapter, frag = &skb_shinfo(skb)->frags[f]; len = frag->size; - offset = frag->page_offset; + offset = 0; while (len) { + i++; + if (i == tx_ring->count) + i = 0; + buffer_info = &tx_ring->buffer_info[i]; size = min(len, max_per_txd); - /* Workaround for premature desc write-backs - * in TSO mode. Append 4-byte sentinel desc */ - if (mss && f == (nr_frags-1) && size == len && size > 8) - size -= 4; buffer_info->length = size; buffer_info->time_stamp = jiffies; - buffer_info->dma = - pci_map_page(adapter->pdev, - frag->page, - offset, - size, - PCI_DMA_TODEVICE); - if (pci_dma_mapping_error(adapter->pdev, - buffer_info->dma)) { - dev_err(&adapter->pdev->dev, - "TX DMA page map failed\n"); - adapter->tx_dma_failed++; - return -1; - } - buffer_info->next_to_watch = i; + buffer_info->dma = map[f + 1] + offset; len -= size; offset += size; count++; - - i++; - if (i == tx_ring->count) - i = 0; } } - if (i == 0) - i = tx_ring->count - 1; - else - i--; - tx_ring->buffer_info[i].skb = skb; tx_ring->buffer_info[first].next_to_watch = i; @@ -4069,7 +4040,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) unsigned int max_txd_pwr = E1000_MAX_TXD_PWR; unsigned int tx_flags = 0; unsigned int len = skb->len - skb->data_len; - unsigned long irq_flags; unsigned int nr_frags; unsigned int mss; int count = 0; @@ -4138,18 +4108,12 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (adapter->hw.mac.tx_pkt_filtering) e1000_transfer_dhcp_info(adapter, skb); - if (!spin_trylock_irqsave(&adapter->tx_queue_lock, irq_flags)) - /* Collision - tell upper layer to requeue */ - return NETDEV_TX_LOCKED; - /* * need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ - if (e1000_maybe_stop_tx(netdev, count + 2)) { - spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); + if (e1000_maybe_stop_tx(netdev, count + 2)) return NETDEV_TX_BUSY; - } if (adapter->vlgrp && vlan_tx_tag_present(skb)) { tx_flags |= E1000_TX_FLAGS_VLAN; @@ -4161,7 +4125,6 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tso = e1000_tso(adapter, skb); if (tso < 0) { dev_kfree_skb_any(skb); - spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); return NETDEV_TX_OK; } @@ -4178,22 +4141,20 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if (skb->protocol == htons(ETH_P_IP)) tx_flags |= E1000_TX_FLAGS_IPV4; + /* if count is 0 then mapping error has occured */ count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss); - if (count < 0) { - /* handle pci_map_single() error in e1000_tx_map */ + if (count) { + e1000_tx_queue(adapter, tx_flags, count); + netdev->trans_start = jiffies; + /* Make sure there is space in the ring for the next send. */ + e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2); + + } else { dev_kfree_skb_any(skb); - spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); - return NETDEV_TX_OK; + tx_ring->buffer_info[first].time_stamp = 0; + tx_ring->next_to_use = first; } - e1000_tx_queue(adapter, tx_flags, count); - - netdev->trans_start = jiffies; - - /* Make sure there is space in the ring for the next send. */ - e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2); - - spin_unlock_irqrestore(&adapter->tx_queue_lock, irq_flags); return NETDEV_TX_OK; } @@ -4543,6 +4504,14 @@ static int e1000_resume(struct pci_dev *pdev) return err; } + /* AER (Advanced Error Reporting) hooks */ + err = pci_enable_pcie_error_reporting(pdev); + if (err) { + dev_err(&pdev->dev, "pci_enable_pcie_error_reporting failed " + "0x%x\n", err); + /* non-fatal, continue */ + } + pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); @@ -4637,24 +4606,29 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; int err; + pci_ers_result_t result; e1000e_disable_l1aspm(pdev); err = pci_enable_device_mem(pdev); if (err) { dev_err(&pdev->dev, "Cannot re-enable PCI device after reset.\n"); - return PCI_ERS_RESULT_DISCONNECT; - } - pci_set_master(pdev); - pci_restore_state(pdev); + result = PCI_ERS_RESULT_DISCONNECT; + } else { + pci_set_master(pdev); + pci_restore_state(pdev); - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_enable_wake(pdev, PCI_D3cold, 0); + pci_enable_wake(pdev, PCI_D3hot, 0); + pci_enable_wake(pdev, PCI_D3cold, 0); - e1000e_reset(adapter); - ew32(WUS, ~0); + e1000e_reset(adapter); + ew32(WUS, ~0); + result = PCI_ERS_RESULT_RECOVERED; + } + + pci_cleanup_aer_uncorrect_error_status(pdev); - return PCI_ERS_RESULT_RECOVERED; + return result; } /** @@ -4922,12 +4896,6 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; - /* - * We should not be using LLTX anymore, but we are still Tx faster with - * it. - */ - netdev->features |= NETIF_F_LLTX; - if (e1000e_enable_mng_pass_thru(&adapter->hw)) adapter->flags |= FLAG_MNG_PT_ENABLED; @@ -5091,6 +5059,7 @@ static void __devexit e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); + int err; /* * flush_scheduled work may reschedule our watchdog task, so @@ -5125,6 +5094,12 @@ static void __devexit e1000_remove(struct pci_dev *pdev) free_netdev(netdev); + /* AER disable */ + err = pci_disable_pcie_error_reporting(pdev); + if (err) + dev_err(&pdev->dev, + "pci_disable_pcie_error_reporting failed 0x%x\n", err); + pci_disable_device(pdev); } @@ -5156,6 +5131,8 @@ static struct pci_device_id e1000_pci_tbl[] = { { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 }, + { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 }, { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT), board_80003es2lan }, |