summaryrefslogtreecommitdiffstats
path: root/drivers/net/eth16i.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/eth16i.c')
-rw-r--r--drivers/net/eth16i.c1509
1 files changed, 1509 insertions, 0 deletions
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
new file mode 100644
index 00000000000..ccae6ba5f7c
--- /dev/null
+++ b/drivers/net/eth16i.c
@@ -0,0 +1,1509 @@
+/* eth16i.c An ICL EtherTeam 16i and 32 EISA ethernet driver for Linux
+
+ Written 1994-1999 by Mika Kuoppala
+
+ Copyright (C) 1994-1999 by Mika Kuoppala
+ Based on skeleton.c and heavily on at1700.c by Donald Becker
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ The author may be reached as miku@iki.fi
+
+ This driver supports following cards :
+ - ICL EtherTeam 16i
+ - ICL EtherTeam 32 EISA
+ (Uses true 32 bit transfers rather than 16i compability mode)
+
+ Example Module usage:
+ insmod eth16i.o io=0x2a0 mediatype=bnc
+
+ mediatype can be one of the following: bnc,tp,dix,auto,eprom
+
+ 'auto' will try to autoprobe mediatype.
+ 'eprom' will use whatever type defined in eprom.
+
+ I have benchmarked driver with PII/300Mhz as a ftp client
+ and 486/33Mhz as a ftp server. Top speed was 1128.37 kilobytes/sec.
+
+ Sources:
+ - skeleton.c a sample network driver core for linux,
+ written by Donald Becker <becker@scyld.com>
+ - at1700.c a driver for Allied Telesis AT1700, written
+ by Donald Becker.
+ - e16iSRV.asm a Netware 3.X Server Driver for ICL EtherTeam16i
+ written by Markku Viima
+ - The Fujitsu MB86965 databook.
+
+ Author thanks following persons due to their valueble assistance:
+ Markku Viima (ICL)
+ Ari Valve (ICL)
+ Donald Becker
+ Kurt Huwig <kurt@huwig.de>
+
+ Revision history:
+
+ Version Date Description
+
+ 0.01 15.12-94 Initial version (card detection)
+ 0.02 23.01-95 Interrupt is now hooked correctly
+ 0.03 01.02-95 Rewrote initialization part
+ 0.04 07.02-95 Base skeleton done...
+ Made a few changes to signature checking
+ to make it a bit reliable.
+ - fixed bug in tx_buf mapping
+ - fixed bug in initialization (DLC_EN
+ wasn't enabled when initialization
+ was done.)
+ 0.05 08.02-95 If there were more than one packet to send,
+ transmit was jammed due to invalid
+ register write...now fixed
+ 0.06 19.02-95 Rewrote interrupt handling
+ 0.07 13.04-95 Wrote EEPROM read routines
+ Card configuration now set according to
+ data read from EEPROM
+ 0.08 23.06-95 Wrote part that tries to probe used interface
+ port if AUTO is selected
+
+ 0.09 01.09-95 Added module support
+
+ 0.10 04.09-95 Fixed receive packet allocation to work
+ with kernels > 1.3.x
+
+ 0.20 20.09-95 Added support for EtherTeam32 EISA
+
+ 0.21 17.10-95 Removed the unnecessary extern
+ init_etherdev() declaration. Some
+ other cleanups.
+
+ 0.22 22.02-96 Receive buffer was not flushed
+ correctly when faulty packet was
+ received. Now fixed.
+
+ 0.23 26.02-96 Made resetting the adapter
+ more reliable.
+
+ 0.24 27.02-96 Rewrote faulty packet handling in eth16i_rx
+
+ 0.25 22.05-96 kfree() was missing from cleanup_module.
+
+ 0.26 11.06-96 Sometimes card was not found by
+ check_signature(). Now made more reliable.
+
+ 0.27 23.06-96 Oops. 16 consecutive collisions halted
+ adapter. Now will try to retransmit
+ MAX_COL_16 times before finally giving up.
+
+ 0.28 28.10-97 Added dev_id parameter (NULL) for free_irq
+
+ 0.29 29.10-97 Multiple card support for module users
+
+ 0.30 30.10-97 Fixed irq allocation bug.
+ (request_irq moved from probe to open)
+
+ 0.30a 21.08-98 Card detection made more relaxed. Driver
+ had problems with some TCP/IP-PROM boots
+ to find the card. Suggested by
+ Kurt Huwig <kurt@huwig.de>
+
+ 0.31 28.08-98 Media interface port can now be selected
+ with module parameters or kernel
+ boot parameters.
+
+ 0.32 31.08-98 IRQ was never freed if open/close
+ pair wasn't called. Now fixed.
+
+ 0.33 10.09-98 When eth16i_open() was called after
+ eth16i_close() chip never recovered.
+ Now more shallow reset is made on
+ close.
+
+ 0.34 29.06-99 Fixed one bad #ifdef.
+ Changed ioaddr -> io for consistency
+
+ 0.35 01.07-99 transmit,-receive bytes were never
+ updated in stats.
+
+ Bugs:
+ In some cases the media interface autoprobing code doesn't find
+ the correct interface type. In this case you can
+ manually choose the interface type in DOS with E16IC.EXE which is
+ configuration software for EtherTeam16i and EtherTeam32 cards.
+ This is also true for IRQ setting. You cannot use module
+ parameter to configure IRQ of the card (yet).
+
+ To do:
+ - Real multicast support
+ - Rewrite the media interface autoprobing code. Its _horrible_ !
+ - Possibly merge all the MB86965 specific code to external
+ module for use by eth16.c and Donald's at1700.c
+ - IRQ configuration with module parameter. I will do
+ this when i will get enough info about setting
+ irq without configuration utility.
+*/
+
+static char *version =
+ "eth16i.c: v0.35 01-Jul-1999 Mika Kuoppala (miku@iki.fi)\n";
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+
+
+/* Few macros */
+#define BIT(a) ( (1 << (a)) )
+#define BITSET(ioaddr, bnum) ((outb(((inb(ioaddr)) | (bnum)), ioaddr)))
+#define BITCLR(ioaddr, bnum) ((outb(((inb(ioaddr)) & (~(bnum))), ioaddr)))
+
+/* This is the I/O address space for Etherteam 16i adapter. */
+#define ETH16I_IO_EXTENT 32
+
+/* Ticks before deciding that transmit has timed out */
+#define TX_TIMEOUT (400*HZ/1000)
+
+/* Maximum loop count when receiving packets */
+#define MAX_RX_LOOP 20
+
+/* Some interrupt masks */
+#define ETH16I_INTR_ON 0xef8a /* Higher is receive mask */
+#define ETH16I_INTR_OFF 0x0000
+
+/* Buffers header status byte meanings */
+#define PKT_GOOD BIT(5)
+#define PKT_GOOD_RMT BIT(4)
+#define PKT_SHORT BIT(3)
+#define PKT_ALIGN_ERR BIT(2)
+#define PKT_CRC_ERR BIT(1)
+#define PKT_RX_BUF_OVERFLOW BIT(0)
+
+/* Transmit status register (DLCR0) */
+#define TX_STATUS_REG 0
+#define TX_DONE BIT(7)
+#define NET_BUSY BIT(6)
+#define TX_PKT_RCD BIT(5)
+#define CR_LOST BIT(4)
+#define TX_JABBER_ERR BIT(3)
+#define COLLISION BIT(2)
+#define COLLISIONS_16 BIT(1)
+
+/* Receive status register (DLCR1) */
+#define RX_STATUS_REG 1
+#define RX_PKT BIT(7) /* Packet received */
+#define BUS_RD_ERR BIT(6)
+#define SHORT_PKT_ERR BIT(3)
+#define ALIGN_ERR BIT(2)
+#define CRC_ERR BIT(1)
+#define RX_BUF_OVERFLOW BIT(0)
+
+/* Transmit Interrupt Enable Register (DLCR2) */
+#define TX_INTR_REG 2
+#define TX_INTR_DONE BIT(7)
+#define TX_INTR_COL BIT(2)
+#define TX_INTR_16_COL BIT(1)
+
+/* Receive Interrupt Enable Register (DLCR3) */
+#define RX_INTR_REG 3
+#define RX_INTR_RECEIVE BIT(7)
+#define RX_INTR_SHORT_PKT BIT(3)
+#define RX_INTR_CRC_ERR BIT(1)
+#define RX_INTR_BUF_OVERFLOW BIT(0)
+
+/* Transmit Mode Register (DLCR4) */
+#define TRANSMIT_MODE_REG 4
+#define LOOPBACK_CONTROL BIT(1)
+#define CONTROL_OUTPUT BIT(2)
+
+/* Receive Mode Register (DLCR5) */
+#define RECEIVE_MODE_REG 5
+#define RX_BUFFER_EMPTY BIT(6)
+#define ACCEPT_BAD_PACKETS BIT(5)
+#define RECEIVE_SHORT_ADDR BIT(4)
+#define ACCEPT_SHORT_PACKETS BIT(3)
+#define REMOTE_RESET BIT(2)
+
+#define ADDRESS_FILTER_MODE BIT(1) | BIT(0)
+#define REJECT_ALL 0
+#define ACCEPT_ALL 3
+#define MODE_1 1 /* NODE ID, BC, MC, 2-24th bit */
+#define MODE_2 2 /* NODE ID, BC, MC, Hash Table */
+
+/* Configuration Register 0 (DLCR6) */
+#define CONFIG_REG_0 6
+#define DLC_EN BIT(7)
+#define SRAM_CYCLE_TIME_100NS BIT(6)
+#define SYSTEM_BUS_WIDTH_8 BIT(5) /* 1 = 8bit, 0 = 16bit */
+#define BUFFER_WIDTH_8 BIT(4) /* 1 = 8bit, 0 = 16bit */
+#define TBS1 BIT(3)
+#define TBS0 BIT(2)
+#define SRAM_BS1 BIT(1) /* 00=8kb, 01=16kb */
+#define SRAM_BS0 BIT(0) /* 10=32kb, 11=64kb */
+
+#ifndef ETH16I_TX_BUF_SIZE /* 0 = 2kb, 1 = 4kb */
+#define ETH16I_TX_BUF_SIZE 3 /* 2 = 8kb, 3 = 16kb */
+#endif
+#define TX_BUF_1x2048 0
+#define TX_BUF_2x2048 1
+#define TX_BUF_2x4098 2
+#define TX_BUF_2x8192 3
+
+/* Configuration Register 1 (DLCR7) */
+#define CONFIG_REG_1 7
+#define POWERUP BIT(5)
+
+/* Transmit start register */
+#define TRANSMIT_START_REG 10
+#define TRANSMIT_START_RB 2
+#define TX_START BIT(7) /* Rest of register bit indicate*/
+ /* number of packets in tx buffer*/
+/* Node ID registers (DLCR8-13) */
+#define NODE_ID_0 8
+#define NODE_ID_RB 0
+
+/* Hash Table registers (HT8-15) */
+#define HASH_TABLE_0 8
+#define HASH_TABLE_RB 1
+
+/* Buffer memory ports */
+#define BUFFER_MEM_PORT_LB 8
+#define DATAPORT BUFFER_MEM_PORT_LB
+#define BUFFER_MEM_PORT_HB 9
+
+/* 16 Collision control register (BMPR11) */
+#define COL_16_REG 11
+#define HALT_ON_16 0x00
+#define RETRANS_AND_HALT_ON_16 0x02
+
+/* Maximum number of attempts to send after 16 concecutive collisions */
+#define MAX_COL_16 10
+
+/* DMA Burst and Transceiver Mode Register (BMPR13) */
+#define TRANSCEIVER_MODE_REG 13
+#define TRANSCEIVER_MODE_RB 2
+#define IO_BASE_UNLOCK BIT(7)
+#define LOWER_SQUELCH_TRESH BIT(6)
+#define LINK_TEST_DISABLE BIT(5)
+#define AUI_SELECT BIT(4)
+#define DIS_AUTO_PORT_SEL BIT(3)
+
+/* Filter Self Receive Register (BMPR14) */
+#define FILTER_SELF_RX_REG 14
+#define SKIP_RX_PACKET BIT(2)
+#define FILTER_SELF_RECEIVE BIT(0)
+
+/* EEPROM Control Register (BMPR 16) */
+#define EEPROM_CTRL_REG 16
+
+/* EEPROM Data Register (BMPR 17) */
+#define EEPROM_DATA_REG 17
+
+/* NMC93CSx6 EEPROM Control Bits */
+#define CS_0 0x00
+#define CS_1 0x20
+#define SK_0 0x00
+#define SK_1 0x40
+#define DI_0 0x00
+#define DI_1 0x80
+
+/* NMC93CSx6 EEPROM Instructions */
+#define EEPROM_READ 0x80
+
+/* NMC93CSx6 EEPROM Addresses */
+#define E_NODEID_0 0x02
+#define E_NODEID_1 0x03
+#define E_NODEID_2 0x04
+#define E_PORT_SELECT 0x14
+ #define E_PORT_BNC 0x00
+ #define E_PORT_DIX 0x01
+ #define E_PORT_TP 0x02
+ #define E_PORT_AUTO 0x03
+ #define E_PORT_FROM_EPROM 0x04
+#define E_PRODUCT_CFG 0x30
+
+
+/* Macro to slow down io between EEPROM clock transitions */
+#define eeprom_slow_io() do { int _i = 40; while(--_i > 0) { inb(0x80); }}while(0)
+
+/* Jumperless Configuration Register (BMPR19) */
+#define JUMPERLESS_CONFIG 19
+
+/* ID ROM registers, writing to them also resets some parts of chip */
+#define ID_ROM_0 24
+#define ID_ROM_7 31
+#define RESET ID_ROM_0
+
+/* This is the I/O address list to be probed when seeking the card */
+static unsigned int eth16i_portlist[] __initdata = {
+ 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300, 0
+};
+
+static unsigned int eth32i_portlist[] __initdata = {
+ 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000, 0x7000, 0x8000,
+ 0x9000, 0xA000, 0xB000, 0xC000, 0xD000, 0xE000, 0xF000, 0
+};
+
+/* This is the Interrupt lookup table for Eth16i card */
+static unsigned int eth16i_irqmap[] __initdata = { 9, 10, 5, 15, 0 };
+#define NUM_OF_ISA_IRQS 4
+
+/* This is the Interrupt lookup table for Eth32i card */
+static unsigned int eth32i_irqmap[] __initdata = { 3, 5, 7, 9, 10, 11, 12, 15, 0 };
+#define EISA_IRQ_REG 0xc89
+#define NUM_OF_EISA_IRQS 8
+
+static unsigned int eth16i_tx_buf_map[] = { 2048, 2048, 4096, 8192 };
+
+/* Use 0 for production, 1 for verification, >2 for debug */
+#ifndef ETH16I_DEBUG
+#define ETH16I_DEBUG 0
+#endif
+static unsigned int eth16i_debug = ETH16I_DEBUG;
+
+/* Information for each board */
+
+struct eth16i_local {
+ struct net_device_stats stats;
+ unsigned char tx_started;
+ unsigned char tx_buf_busy;
+ unsigned short tx_queue; /* Number of packets in transmit buffer */
+ unsigned short tx_queue_len;
+ unsigned int tx_buf_size;
+ unsigned long open_time;
+ unsigned long tx_buffered_packets;
+ unsigned long tx_buffered_bytes;
+ unsigned long col_16;
+ spinlock_t lock;
+};
+
+/* Function prototypes */
+
+static int eth16i_probe1(struct net_device *dev, int ioaddr);
+static int eth16i_check_signature(int ioaddr);
+static int eth16i_probe_port(int ioaddr);
+static void eth16i_set_port(int ioaddr, int porttype);
+static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l);
+static int eth16i_receive_probe_packet(int ioaddr);
+static int eth16i_get_irq(int ioaddr);
+static int eth16i_read_eeprom(int ioaddr, int offset);
+static int eth16i_read_eeprom_word(int ioaddr);
+static void eth16i_eeprom_cmd(int ioaddr, unsigned char command);
+static int eth16i_open(struct net_device *dev);
+static int eth16i_close(struct net_device *dev);
+static int eth16i_tx(struct sk_buff *skb, struct net_device *dev);
+static void eth16i_rx(struct net_device *dev);
+static void eth16i_timeout(struct net_device *dev);
+static irqreturn_t eth16i_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void eth16i_reset(struct net_device *dev);
+static void eth16i_timeout(struct net_device *dev);
+static void eth16i_skip_packet(struct net_device *dev);
+static void eth16i_multicast(struct net_device *dev);
+static void eth16i_select_regbank(unsigned char regbank, int ioaddr);
+static void eth16i_initialize(struct net_device *dev, int boot);
+
+#if 0
+static int eth16i_set_irq(struct net_device *dev);
+#endif
+
+#ifdef MODULE
+static ushort eth16i_parse_mediatype(const char* s);
+#endif
+
+static struct net_device_stats *eth16i_get_stats(struct net_device *dev);
+
+static char cardname[] __initdata = "ICL EtherTeam 16i/32";
+
+static int __init do_eth16i_probe(struct net_device *dev)
+{
+ int i;
+ int ioaddr;
+ int base_addr = dev->base_addr;
+
+ SET_MODULE_OWNER(dev);
+
+ if(eth16i_debug > 4)
+ printk(KERN_DEBUG "Probing started for %s\n", cardname);
+
+ if(base_addr > 0x1ff) /* Check only single location */
+ return eth16i_probe1(dev, base_addr);
+ else if(base_addr != 0) /* Don't probe at all */
+ return -ENXIO;
+
+ /* Seek card from the ISA io address space */
+ for(i = 0; (ioaddr = eth16i_portlist[i]) ; i++)
+ if(eth16i_probe1(dev, ioaddr) == 0)
+ return 0;
+
+ /* Seek card from the EISA io address space */
+ for(i = 0; (ioaddr = eth32i_portlist[i]) ; i++)
+ if(eth16i_probe1(dev, ioaddr) == 0)
+ return 0;
+
+ return -ENODEV;
+}
+
+#ifndef MODULE
+struct net_device * __init eth16i_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct eth16i_local));
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ err = do_eth16i_probe(dev);
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, ETH16I_IO_EXTENT);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+#endif
+
+static int __init eth16i_probe1(struct net_device *dev, int ioaddr)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ static unsigned version_printed;
+ int retval;
+
+ /* Let's grab the region */
+ if (!request_region(ioaddr, ETH16I_IO_EXTENT, cardname))
+ return -EBUSY;
+
+ /*
+ The MB86985 chip has on register which holds information in which
+ io address the chip lies. First read this register and compare
+ it to our current io address and if match then this could
+ be our chip.
+ */
+
+ if(ioaddr < 0x1000) {
+ if(eth16i_portlist[(inb(ioaddr + JUMPERLESS_CONFIG) & 0x07)]
+ != ioaddr) {
+ retval = -ENODEV;
+ goto out;
+ }
+ }
+
+ /* Now we will go a bit deeper and try to find the chip's signature */
+
+ if(eth16i_check_signature(ioaddr) != 0) {
+ retval = -ENODEV;
+ goto out;
+ }
+
+ /*
+ Now it seems that we have found a ethernet chip in this particular
+ ioaddr. The MB86985 chip has this feature, that when you read a
+ certain register it will increase it's io base address to next
+ configurable slot. Now when we have found the chip, first thing is
+ to make sure that the chip's ioaddr will hold still here.
+ */
+
+ eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
+ outb(0x00, ioaddr + TRANSCEIVER_MODE_REG);
+
+ outb(0x00, ioaddr + RESET); /* Reset some parts of chip */
+ BITSET(ioaddr + CONFIG_REG_0, BIT(7)); /* Disable the data link */
+
+ if( (eth16i_debug & version_printed++) == 0)
+ printk(KERN_INFO "%s", version);
+
+ dev->base_addr = ioaddr;
+ dev->irq = eth16i_get_irq(ioaddr);
+
+ /* Try to obtain interrupt vector */
+
+ if ((retval = request_irq(dev->irq, (void *)&eth16i_interrupt, 0, cardname, dev))) {
+ printk(KERN_WARNING "%s at %#3x, but is unusable due to conflicting IRQ %d.\n",
+ cardname, ioaddr, dev->irq);
+ goto out;
+ }
+
+ printk(KERN_INFO "%s: %s at %#3x, IRQ %d, ",
+ dev->name, cardname, ioaddr, dev->irq);
+
+
+ /* Now we will have to lock the chip's io address */
+ eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
+ outb(0x38, ioaddr + TRANSCEIVER_MODE_REG);
+
+ eth16i_initialize(dev, 1); /* Initialize rest of the chip's registers */
+
+ /* Now let's same some energy by shutting down the chip ;) */
+ BITCLR(ioaddr + CONFIG_REG_1, POWERUP);
+
+ /* Initialize the device structure */
+ memset(lp, 0, sizeof(struct eth16i_local));
+ dev->open = eth16i_open;
+ dev->stop = eth16i_close;
+ dev->hard_start_xmit = eth16i_tx;
+ dev->get_stats = eth16i_get_stats;
+ dev->set_multicast_list = eth16i_multicast;
+ dev->tx_timeout = eth16i_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ spin_lock_init(&lp->lock);
+ return 0;
+out:
+ release_region(ioaddr, ETH16I_IO_EXTENT);
+ return retval;
+}
+
+
+static void eth16i_initialize(struct net_device *dev, int boot)
+{
+ int ioaddr = dev->base_addr;
+ int i, node_w = 0;
+ unsigned char node_byte = 0;
+
+ /* Setup station address */
+ eth16i_select_regbank(NODE_ID_RB, ioaddr);
+ for(i = 0 ; i < 3 ; i++) {
+ unsigned short node_val = eth16i_read_eeprom(ioaddr, E_NODEID_0 + i);
+ ((unsigned short *)dev->dev_addr)[i] = ntohs(node_val);
+ }
+
+ for(i = 0; i < 6; i++) {
+ outb( ((unsigned char *)dev->dev_addr)[i], ioaddr + NODE_ID_0 + i);
+ if(boot) {
+ printk("%02x", inb(ioaddr + NODE_ID_0 + i));
+ if(i != 5)
+ printk(":");
+ }
+ }
+
+ /* Now we will set multicast addresses to accept none */
+ eth16i_select_regbank(HASH_TABLE_RB, ioaddr);
+ for(i = 0; i < 8; i++)
+ outb(0x00, ioaddr + HASH_TABLE_0 + i);
+
+ /*
+ Now let's disable the transmitter and receiver, set the buffer ram
+ cycle time, bus width and buffer data path width. Also we shall
+ set transmit buffer size and total buffer size.
+ */
+
+ eth16i_select_regbank(2, ioaddr);
+
+ node_byte = 0;
+ node_w = eth16i_read_eeprom(ioaddr, E_PRODUCT_CFG);
+
+ if( (node_w & 0xFF00) == 0x0800)
+ node_byte |= BUFFER_WIDTH_8;
+
+ node_byte |= SRAM_BS1;
+
+ if( (node_w & 0x00FF) == 64)
+ node_byte |= SRAM_BS0;
+
+ node_byte |= DLC_EN | SRAM_CYCLE_TIME_100NS | (ETH16I_TX_BUF_SIZE << 2);
+
+ outb(node_byte, ioaddr + CONFIG_REG_0);
+
+ /* We shall halt the transmitting, if 16 collisions are detected */
+ outb(HALT_ON_16, ioaddr + COL_16_REG);
+
+#ifdef MODULE
+ /* if_port already set by init_module() */
+#else
+ dev->if_port = (dev->mem_start < E_PORT_FROM_EPROM) ?
+ dev->mem_start : E_PORT_FROM_EPROM;
+#endif
+
+ /* Set interface port type */
+ if(boot) {
+ char *porttype[] = {"BNC", "DIX", "TP", "AUTO", "FROM_EPROM" };
+
+ switch(dev->if_port)
+ {
+
+ case E_PORT_FROM_EPROM:
+ dev->if_port = eth16i_read_eeprom(ioaddr, E_PORT_SELECT);
+ break;
+
+ case E_PORT_AUTO:
+ dev->if_port = eth16i_probe_port(ioaddr);
+ break;
+
+ case E_PORT_BNC:
+ case E_PORT_TP:
+ case E_PORT_DIX:
+ break;
+ }
+
+ printk(" %s interface.\n", porttype[dev->if_port]);
+
+ eth16i_set_port(ioaddr, dev->if_port);
+ }
+
+ /* Set Receive Mode to normal operation */
+ outb(MODE_2, ioaddr + RECEIVE_MODE_REG);
+}
+
+static int eth16i_probe_port(int ioaddr)
+{
+ int i;
+ int retcode;
+ unsigned char dummy_packet[64];
+
+ /* Powerup the chip */
+ outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
+
+ BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
+
+ eth16i_select_regbank(NODE_ID_RB, ioaddr);
+
+ for(i = 0; i < 6; i++) {
+ dummy_packet[i] = inb(ioaddr + NODE_ID_0 + i);
+ dummy_packet[i+6] = inb(ioaddr + NODE_ID_0 + i);
+ }
+
+ dummy_packet[12] = 0x00;
+ dummy_packet[13] = 0x04;
+ memset(dummy_packet + 14, 0, sizeof(dummy_packet) - 14);
+
+ eth16i_select_regbank(2, ioaddr);
+
+ for(i = 0; i < 3; i++) {
+ BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
+ BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
+ eth16i_set_port(ioaddr, i);
+
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "Set port number %d\n", i);
+
+ retcode = eth16i_send_probe_packet(ioaddr, dummy_packet, 64);
+ if(retcode == 0) {
+ retcode = eth16i_receive_probe_packet(ioaddr);
+ if(retcode != -1) {
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "Eth16i interface port found at %d\n", i);
+ return i;
+ }
+ }
+ else {
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "TRANSMIT_DONE timeout when probing interface port\n");
+ }
+ }
+
+ if( eth16i_debug > 1)
+ printk(KERN_DEBUG "Using default port\n");
+
+ return E_PORT_BNC;
+}
+
+static void eth16i_set_port(int ioaddr, int porttype)
+{
+ unsigned short temp = 0;
+
+ eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
+ outb(LOOPBACK_CONTROL, ioaddr + TRANSMIT_MODE_REG);
+
+ temp |= DIS_AUTO_PORT_SEL;
+
+ switch(porttype) {
+
+ case E_PORT_BNC :
+ temp |= AUI_SELECT;
+ break;
+
+ case E_PORT_TP :
+ break;
+
+ case E_PORT_DIX :
+ temp |= AUI_SELECT;
+ BITSET(ioaddr + TRANSMIT_MODE_REG, CONTROL_OUTPUT);
+ break;
+ }
+
+ outb(temp, ioaddr + TRANSCEIVER_MODE_REG);
+
+ if(eth16i_debug > 1) {
+ printk(KERN_DEBUG "TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG));
+ printk(KERN_DEBUG "TRANSCEIVER_MODE_REG = %x\n",
+ inb(ioaddr+TRANSCEIVER_MODE_REG));
+ }
+}
+
+static int eth16i_send_probe_packet(int ioaddr, unsigned char *b, int l)
+{
+ int starttime;
+
+ outb(0xff, ioaddr + TX_STATUS_REG);
+
+ outw(l, ioaddr + DATAPORT);
+ outsw(ioaddr + DATAPORT, (unsigned short *)b, (l + 1) >> 1);
+
+ starttime = jiffies;
+ outb(TX_START | 1, ioaddr + TRANSMIT_START_REG);
+
+ while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
+ if( (jiffies - starttime) > TX_TIMEOUT) {
+ return -1;
+ }
+ }
+
+ return 0;
+}
+
+static int eth16i_receive_probe_packet(int ioaddr)
+{
+ int starttime;
+
+ starttime = jiffies;
+
+ while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
+ if( (jiffies - starttime) > TX_TIMEOUT) {
+
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "Timeout occurred waiting transmit packet received\n");
+ starttime = jiffies;
+ while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
+ if( (jiffies - starttime) > TX_TIMEOUT) {
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "Timeout occurred waiting receive packet\n");
+ return -1;
+ }
+ }
+
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "RECEIVE_PACKET\n");
+ return(0); /* Found receive packet */
+ }
+ }
+
+ if(eth16i_debug > 1) {
+ printk(KERN_DEBUG "TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG));
+ printk(KERN_DEBUG "RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG));
+ }
+
+ return(0); /* Return success */
+}
+
+#if 0
+static int eth16i_set_irq(struct net_device* dev)
+{
+ const int ioaddr = dev->base_addr;
+ const int irq = dev->irq;
+ int i = 0;
+
+ if(ioaddr < 0x1000) {
+ while(eth16i_irqmap[i] && eth16i_irqmap[i] != irq)
+ i++;
+
+ if(i < NUM_OF_ISA_IRQS) {
+ u8 cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
+ cbyte = (cbyte & 0x3F) | (i << 6);
+ outb(cbyte, ioaddr + JUMPERLESS_CONFIG);
+ return 0;
+ }
+ }
+ else {
+ printk(KERN_NOTICE "%s: EISA Interrupt cannot be set. Use EISA Configuration utility.\n", dev->name);
+ }
+
+ return -1;
+
+}
+#endif
+
+static int __init eth16i_get_irq(int ioaddr)
+{
+ unsigned char cbyte;
+
+ if( ioaddr < 0x1000) {
+ cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
+ return( eth16i_irqmap[ ((cbyte & 0xC0) >> 6) ] );
+ } else { /* Oh..the card is EISA so method getting IRQ different */
+ unsigned short index = 0;
+ cbyte = inb(ioaddr + EISA_IRQ_REG);
+ while( (cbyte & 0x01) == 0) {
+ cbyte = cbyte >> 1;
+ index++;
+ }
+ return( eth32i_irqmap[ index ] );
+ }
+}
+
+static int __init eth16i_check_signature(int ioaddr)
+{
+ int i;
+ unsigned char creg[4] = { 0 };
+
+ for(i = 0; i < 4 ; i++) {
+
+ creg[i] = inb(ioaddr + TRANSMIT_MODE_REG + i);
+
+ if(eth16i_debug > 1)
+ printk("eth16i: read signature byte %x at %x\n",
+ creg[i],
+ ioaddr + TRANSMIT_MODE_REG + i);
+ }
+
+ creg[0] &= 0x0F; /* Mask collision cnr */
+ creg[2] &= 0x7F; /* Mask DCLEN bit */
+
+#if 0
+ /*
+ This was removed because the card was sometimes left to state
+ from which it couldn't be find anymore. If there is need
+ to more strict check still this have to be fixed.
+ */
+ if( ! ((creg[0] == 0x06) && (creg[1] == 0x41)) ) {
+ if(creg[1] != 0x42)
+ return -1;
+ }
+#endif
+
+ if( !((creg[2] == 0x36) && (creg[3] == 0xE0)) ) {
+ creg[2] &= 0x40;
+ creg[3] &= 0x03;
+
+ if( !((creg[2] == 0x40) && (creg[3] == 0x00)) )
+ return -1;
+ }
+
+ if(eth16i_read_eeprom(ioaddr, E_NODEID_0) != 0)
+ return -1;
+
+ if((eth16i_read_eeprom(ioaddr, E_NODEID_1) & 0xFF00) != 0x4B00)
+ return -1;
+
+ return 0;
+}
+
+static int eth16i_read_eeprom(int ioaddr, int offset)
+{
+ int data = 0;
+
+ eth16i_eeprom_cmd(ioaddr, EEPROM_READ | offset);
+ outb(CS_1, ioaddr + EEPROM_CTRL_REG);
+ data = eth16i_read_eeprom_word(ioaddr);
+ outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
+
+ return(data);
+}
+
+static int eth16i_read_eeprom_word(int ioaddr)
+{
+ int i;
+ int data = 0;
+
+ for(i = 16; i > 0; i--) {
+ outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
+ eeprom_slow_io();
+ outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
+ eeprom_slow_io();
+ data = (data << 1) |
+ ((inb(ioaddr + EEPROM_DATA_REG) & DI_1) ? 1 : 0);
+
+ eeprom_slow_io();
+ }
+
+ return(data);
+}
+
+static void eth16i_eeprom_cmd(int ioaddr, unsigned char command)
+{
+ int i;
+
+ outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
+ outb(DI_0, ioaddr + EEPROM_DATA_REG);
+ outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
+ outb(DI_1, ioaddr + EEPROM_DATA_REG);
+ outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
+
+ for(i = 7; i >= 0; i--) {
+ short cmd = ( (command & (1 << i)) ? DI_1 : DI_0 );
+ outb(cmd, ioaddr + EEPROM_DATA_REG);
+ outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
+ eeprom_slow_io();
+ outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
+ eeprom_slow_io();
+ }
+}
+
+static int eth16i_open(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ /* Powerup the chip */
+ outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
+
+ /* Initialize the chip */
+ eth16i_initialize(dev, 0);
+
+ /* Set the transmit buffer size */
+ lp->tx_buf_size = eth16i_tx_buf_map[ETH16I_TX_BUF_SIZE & 0x03];
+
+ if(eth16i_debug > 0)
+ printk(KERN_DEBUG "%s: transmit buffer size %d\n",
+ dev->name, lp->tx_buf_size);
+
+ /* Now enable Transmitter and Receiver sections */
+ BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
+
+ /* Now switch to register bank 2, for run time operation */
+ eth16i_select_regbank(2, ioaddr);
+
+ lp->open_time = jiffies;
+ lp->tx_started = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+
+ /* Turn on interrupts*/
+ outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
+
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int eth16i_close(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ eth16i_reset(dev);
+
+ /* Turn off interrupts*/
+ outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
+
+ netif_stop_queue(dev);
+
+ lp->open_time = 0;
+
+ /* Disable transmit and receive */
+ BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
+
+ /* Reset the chip */
+ /* outb(0xff, ioaddr + RESET); */
+ /* outw(0xffff, ioaddr + TX_STATUS_REG); */
+
+ outb(0x00, ioaddr + CONFIG_REG_1);
+
+ return 0;
+}
+
+static void eth16i_timeout(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ /*
+ If we get here, some higher level has decided that
+ we are broken. There should really be a "kick me"
+ function call instead.
+ */
+
+ outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
+ printk(KERN_WARNING "%s: transmit timed out with status %04x, %s ?\n",
+ dev->name,
+ inw(ioaddr + TX_STATUS_REG), (inb(ioaddr + TX_STATUS_REG) & TX_DONE) ?
+ "IRQ conflict" : "network cable problem");
+
+ dev->trans_start = jiffies;
+
+ /* Let's dump all registers */
+ if(eth16i_debug > 0) {
+ printk(KERN_DEBUG "%s: timeout: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
+ dev->name, inb(ioaddr + 0),
+ inb(ioaddr + 1), inb(ioaddr + 2),
+ inb(ioaddr + 3), inb(ioaddr + 4),
+ inb(ioaddr + 5),
+ inb(ioaddr + 6), inb(ioaddr + 7));
+
+ printk(KERN_DEBUG "%s: transmit start reg: %02x. collision reg %02x\n",
+ dev->name, inb(ioaddr + TRANSMIT_START_REG),
+ inb(ioaddr + COL_16_REG));
+ printk(KERN_DEBUG "lp->tx_queue = %d\n", lp->tx_queue);
+ printk(KERN_DEBUG "lp->tx_queue_len = %d\n", lp->tx_queue_len);
+ printk(KERN_DEBUG "lp->tx_started = %d\n", lp->tx_started);
+ }
+ lp->stats.tx_errors++;
+ eth16i_reset(dev);
+ dev->trans_start = jiffies;
+ outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
+ netif_wake_queue(dev);
+}
+
+static int eth16i_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ int status = 0;
+ ushort length = skb->len;
+ unsigned char *buf;
+ unsigned long flags;
+
+ if (length < ETH_ZLEN) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL)
+ return 0;
+ length = ETH_ZLEN;
+ }
+ buf = skb->data;
+
+ netif_stop_queue(dev);
+
+ /* Turn off TX interrupts */
+ outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
+
+ /* We would be better doing the disable_irq tricks the 3c509 does,
+ that would make this suck a lot less */
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ if( (length + 2) > (lp->tx_buf_size - lp->tx_queue_len)) {
+ if(eth16i_debug > 0)
+ printk(KERN_WARNING "%s: Transmit buffer full.\n", dev->name);
+ }
+ else {
+ outw(length, ioaddr + DATAPORT);
+
+ if( ioaddr < 0x1000 )
+ outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
+ else {
+ unsigned char frag = length % 4;
+ outsl(ioaddr + DATAPORT, buf, length >> 2);
+ if( frag != 0 ) {
+ outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC)), 1);
+ if( frag == 3 )
+ outsw(ioaddr + DATAPORT,
+ (buf + (length & 0xFFFC) + 2), 1);
+ }
+ }
+ lp->tx_buffered_packets++;
+ lp->tx_buffered_bytes = length;
+ lp->tx_queue++;
+ lp->tx_queue_len += length + 2;
+ }
+ lp->tx_buf_busy = 0;
+
+ if(lp->tx_started == 0) {
+ /* If the transmitter is idle..always trigger a transmit */
+ outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ dev->trans_start = jiffies;
+ lp->tx_started = 1;
+ netif_wake_queue(dev);
+ }
+ else if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
+ /* There is still more room for one more packet in tx buffer */
+ netif_wake_queue(dev);
+ }
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
+ /* Turn TX interrupts back on */
+ /* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */
+ status = 0;
+ dev_kfree_skb(skb);
+ return 0;
+}
+
+static void eth16i_rx(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ int boguscount = MAX_RX_LOOP;
+
+ /* Loop until all packets have been read */
+ while( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) {
+
+ /* Read status byte from receive buffer */
+ ushort status = inw(ioaddr + DATAPORT);
+
+ /* Get the size of the packet from receive buffer */
+ ushort pkt_len = inw(ioaddr + DATAPORT);
+
+ if(eth16i_debug > 4)
+ printk(KERN_DEBUG "%s: Receiving packet mode %02x status %04x.\n",
+ dev->name,
+ inb(ioaddr + RECEIVE_MODE_REG), status);
+
+ if( !(status & PKT_GOOD) ) {
+ lp->stats.rx_errors++;
+
+ if( (pkt_len < ETH_ZLEN) || (pkt_len > ETH_FRAME_LEN) ) {
+ lp->stats.rx_length_errors++;
+ eth16i_reset(dev);
+ return;
+ }
+ else {
+ eth16i_skip_packet(dev);
+ lp->stats.rx_dropped++;
+ }
+ }
+ else { /* Ok so now we should have a good packet */
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_len + 3);
+ if( skb == NULL ) {
+ printk(KERN_WARNING "%s: Could'n allocate memory for packet (len %d)\n",
+ dev->name, pkt_len);
+ eth16i_skip_packet(dev);
+ lp->stats.rx_dropped++;
+ break;
+ }
+
+ skb->dev = dev;
+ skb_reserve(skb,2);
+
+ /*
+ Now let's get the packet out of buffer.
+ size is (pkt_len + 1) >> 1, cause we are now reading words
+ and it have to be even aligned.
+ */
+
+ if(ioaddr < 0x1000)
+ insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
+ (pkt_len + 1) >> 1);
+ else {
+ unsigned char *buf = skb_put(skb, pkt_len);
+ unsigned char frag = pkt_len % 4;
+
+ insl(ioaddr + DATAPORT, buf, pkt_len >> 2);
+
+ if(frag != 0) {
+ unsigned short rest[2];
+ rest[0] = inw( ioaddr + DATAPORT );
+ if(frag == 3)
+ rest[1] = inw( ioaddr + DATAPORT );
+
+ memcpy(buf + (pkt_len & 0xfffc), (char *)rest, frag);
+ }
+ }
+
+ skb->protocol=eth_type_trans(skb, dev);
+
+ if( eth16i_debug > 5 ) {
+ int i;
+ printk(KERN_DEBUG "%s: Received packet of length %d.\n",
+ dev->name, pkt_len);
+ for(i = 0; i < 14; i++)
+ printk(KERN_DEBUG " %02x", skb->data[i]);
+ printk(KERN_DEBUG ".\n");
+ }
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += pkt_len;
+
+ } /* else */
+
+ if(--boguscount <= 0)
+ break;
+
+ } /* while */
+}
+
+static irqreturn_t eth16i_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct eth16i_local *lp;
+ int ioaddr = 0, status;
+ int handled = 0;
+
+ ioaddr = dev->base_addr;
+ lp = netdev_priv(dev);
+
+ /* Turn off all interrupts from adapter */
+ outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
+
+ /* eth16i_tx won't be called */
+ spin_lock(&lp->lock);
+
+ status = inw(ioaddr + TX_STATUS_REG); /* Get the status */
+ outw(status, ioaddr + TX_STATUS_REG); /* Clear status bits */
+
+ if (status)
+ handled = 1;
+
+ if(eth16i_debug > 3)
+ printk(KERN_DEBUG "%s: Interrupt with status %04x.\n", dev->name, status);
+
+ if( status & 0x7f00 ) {
+
+ lp->stats.rx_errors++;
+
+ if(status & (BUS_RD_ERR << 8) )
+ printk(KERN_WARNING "%s: Bus read error.\n",dev->name);
+ if(status & (SHORT_PKT_ERR << 8) ) lp->stats.rx_length_errors++;
+ if(status & (ALIGN_ERR << 8) ) lp->stats.rx_frame_errors++;
+ if(status & (CRC_ERR << 8) ) lp->stats.rx_crc_errors++;
+ if(status & (RX_BUF_OVERFLOW << 8) ) lp->stats.rx_over_errors++;
+ }
+ if( status & 0x001a) {
+
+ lp->stats.tx_errors++;
+
+ if(status & CR_LOST) lp->stats.tx_carrier_errors++;
+ if(status & TX_JABBER_ERR) lp->stats.tx_window_errors++;
+
+#if 0
+ if(status & COLLISION) {
+ lp->stats.collisions +=
+ ((inb(ioaddr+TRANSMIT_MODE_REG) & 0xF0) >> 4);
+ }
+#endif
+ if(status & COLLISIONS_16) {
+ if(lp->col_16 < MAX_COL_16) {
+ lp->col_16++;
+ lp->stats.collisions++;
+ /* Resume transmitting, skip failed packet */
+ outb(0x02, ioaddr + COL_16_REG);
+ }
+ else {
+ printk(KERN_WARNING "%s: bailing out due to many consecutive 16-in-a-row collisions. Network cable problem?\n", dev->name);
+ }
+ }
+ }
+
+ if( status & 0x00ff ) { /* Let's check the transmit status reg */
+
+ if(status & TX_DONE) { /* The transmit has been done */
+ lp->stats.tx_packets = lp->tx_buffered_packets;
+ lp->stats.tx_bytes += lp->tx_buffered_bytes;
+ lp->col_16 = 0;
+
+ if(lp->tx_queue) { /* Is there still packets ? */
+ /* There was packet(s) so start transmitting and write also
+ how many packets there is to be sended */
+ outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ lp->tx_started = 1;
+ }
+ else {
+ lp->tx_started = 0;
+ }
+ netif_wake_queue(dev);
+ }
+ }
+
+ if( ( status & 0x8000 ) ||
+ ( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) ) {
+ eth16i_rx(dev); /* We have packet in receive buffer */
+ }
+
+ /* Turn interrupts back on */
+ outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
+
+ if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
+ /* There is still more room for one more packet in tx buffer */
+ netif_wake_queue(dev);
+ }
+
+ spin_unlock(&lp->lock);
+
+ return IRQ_RETVAL(handled);
+}
+
+static void eth16i_skip_packet(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ inw(ioaddr + DATAPORT);
+ inw(ioaddr + DATAPORT);
+ inw(ioaddr + DATAPORT);
+
+ outb(SKIP_RX_PACKET, ioaddr + FILTER_SELF_RX_REG);
+ while( inb( ioaddr + FILTER_SELF_RX_REG ) != 0);
+}
+
+static void eth16i_reset(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ if(eth16i_debug > 1)
+ printk(KERN_DEBUG "%s: Resetting device.\n", dev->name);
+
+ BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
+ outw(0xffff, ioaddr + TX_STATUS_REG);
+ eth16i_select_regbank(2, ioaddr);
+
+ lp->tx_started = 0;
+ lp->tx_buf_busy = 0;
+ lp->tx_queue = 0;
+ lp->tx_queue_len = 0;
+ BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
+}
+
+static void eth16i_multicast(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ if(dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC))
+ {
+ dev->flags|=IFF_PROMISC; /* Must do this */
+ outb(3, ioaddr + RECEIVE_MODE_REG);
+ } else {
+ outb(2, ioaddr + RECEIVE_MODE_REG);
+ }
+}
+
+static struct net_device_stats *eth16i_get_stats(struct net_device *dev)
+{
+ struct eth16i_local *lp = netdev_priv(dev);
+ return &lp->stats;
+}
+
+static void eth16i_select_regbank(unsigned char banknbr, int ioaddr)
+{
+ unsigned char data;
+
+ data = inb(ioaddr + CONFIG_REG_1);
+ outb( ((data & 0xF3) | ( (banknbr & 0x03) << 2)), ioaddr + CONFIG_REG_1);
+}
+
+#ifdef MODULE
+
+static ushort eth16i_parse_mediatype(const char* s)
+{
+ if(!s)
+ return E_PORT_FROM_EPROM;
+
+ if (!strncmp(s, "bnc", 3))
+ return E_PORT_BNC;
+ else if (!strncmp(s, "tp", 2))
+ return E_PORT_TP;
+ else if (!strncmp(s, "dix", 3))
+ return E_PORT_DIX;
+ else if (!strncmp(s, "auto", 4))
+ return E_PORT_AUTO;
+ else
+ return E_PORT_FROM_EPROM;
+}
+
+#define MAX_ETH16I_CARDS 4 /* Max number of Eth16i cards per module */
+
+static struct net_device *dev_eth16i[MAX_ETH16I_CARDS];
+static int io[MAX_ETH16I_CARDS];
+#if 0
+static int irq[MAX_ETH16I_CARDS];
+#endif
+static char* mediatype[MAX_ETH16I_CARDS];
+static int debug = -1;
+
+MODULE_AUTHOR("Mika Kuoppala <miku@iki.fi>");
+MODULE_DESCRIPTION("ICL EtherTeam 16i/32 driver");
+MODULE_LICENSE("GPL");
+
+
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "eth16i I/O base address(es)");
+
+#if 0
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(irq, "eth16i interrupt request number");
+#endif
+
+module_param_array(mediatype, charp, NULL, 0);
+MODULE_PARM_DESC(mediatype, "eth16i media type of interface(s) (bnc,tp,dix,auto,eprom)");
+
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "eth16i debug level (0-6)");
+
+int init_module(void)
+{
+ int this_dev, found = 0;
+ struct net_device *dev;
+
+ for (this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
+ dev = alloc_etherdev(sizeof(struct eth16i_local));
+ if (!dev)
+ break;
+
+ dev->base_addr = io[this_dev];
+
+ if(debug != -1)
+ eth16i_debug = debug;
+
+ if(eth16i_debug > 1)
+ printk(KERN_NOTICE "eth16i(%d): interface type %s\n", this_dev, mediatype[this_dev] ? mediatype[this_dev] : "none" );
+
+ dev->if_port = eth16i_parse_mediatype(mediatype[this_dev]);
+
+ if(io[this_dev] == 0) {
+ if(this_dev != 0) /* Only autoprobe 1st one */
+ break;
+
+ printk(KERN_NOTICE "eth16i.c: Presently autoprobing (not recommended) for a single card.\n");
+ }
+
+ if (do_eth16i_probe(dev) == 0) {
+ if (register_netdev(dev) == 0) {
+ dev_eth16i[found++] = dev;
+ continue;
+ }
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, ETH16I_IO_EXTENT);
+ }
+ printk(KERN_WARNING "eth16i.c No Eth16i card found (i/o = 0x%x).\n",
+ io[this_dev]);
+ free_netdev(dev);
+ break;
+ }
+ if (found)
+ return 0;
+ return -ENXIO;
+}
+
+void cleanup_module(void)
+{
+ int this_dev;
+
+ for(this_dev = 0; this_dev < MAX_ETH16I_CARDS; this_dev++) {
+ struct net_device *dev = dev_eth16i[this_dev];
+
+ if(dev->priv) {
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ release_region(dev->base_addr, ETH16I_IO_EXTENT);
+ free_netdev(dev);
+ }
+ }
+}
+#endif /* MODULE */
+
+/*
+ * Local variables:
+ * compile-command: "gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O6 -c eth16i.c"
+ * alt-compile-command: "gcc -DMODVERSIONS -DMODULE -D__KERNEL__ -Wall -Wstrict -prototypes -O6 -c eth16i.c"
+ * tab-width: 8
+ * c-basic-offset: 8
+ * c-indent-level: 8
+ * End:
+ */
+
+/* End of file eth16i.c */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-11-17 14:45:48 +0000