diff options
Diffstat (limited to 'drivers/net/ethernet/8390/3c503.c')
| -rw-r--r-- | drivers/net/ethernet/8390/3c503.c | 777 |
1 files changed, 0 insertions, 777 deletions
diff --git a/drivers/net/ethernet/8390/3c503.c b/drivers/net/ethernet/8390/3c503.c deleted file mode 100644 index 49d76bd0dc8..00000000000 --- a/drivers/net/ethernet/8390/3c503.c +++ /dev/null @@ -1,777 +0,0 @@ -/* 3c503.c: A shared-memory NS8390 ethernet driver for linux. */ -/* - Written 1992-94 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - This driver should work with the 3c503 and 3c503/16. It should be used - in shared memory mode for best performance, although it may also work - in programmed-I/O mode. - - Sources: - EtherLink II Technical Reference Manual, - EtherLink II/16 Technical Reference Manual Supplement, - 3Com Corporation, 5400 Bayfront Plaza, Santa Clara CA 95052-8145 - - The Crynwr 3c503 packet driver. - - Changelog: - - Paul Gortmaker : add support for the 2nd 8kB of RAM on 16 bit cards. - Paul Gortmaker : multiple card support for module users. - rjohnson@analogic.com : Fix up PIO interface for efficient operation. - Jeff Garzik : ethtool support - -*/ - -#define DRV_NAME "3c503" -#define DRV_VERSION "1.10a" -#define DRV_RELDATE "11/17/2001" - - -static const char version[] = - DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/ethtool.h> - -#include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/byteorder.h> - -#include "8390.h" -#include "3c503.h" -#define WRD_COUNT 4 - -static int el2_pio_probe(struct net_device *dev); -static int el2_probe1(struct net_device *dev, int ioaddr); - -/* A zero-terminated list of I/O addresses to be probed in PIO mode. */ -static unsigned int netcard_portlist[] __initdata = - { 0x300,0x310,0x330,0x350,0x250,0x280,0x2a0,0x2e0,0}; - -#define EL2_IO_EXTENT 16 - -static int el2_open(struct net_device *dev); -static int el2_close(struct net_device *dev); -static void el2_reset_8390(struct net_device *dev); -static void el2_init_card(struct net_device *dev); -static void el2_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, - int ring_offset); -static void el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static const struct ethtool_ops netdev_ethtool_ops; - - -/* This routine probes for a memory-mapped 3c503 board by looking for - the "location register" at the end of the jumpered boot PROM space. - This works even if a PROM isn't there. - - If the ethercard isn't found there is an optional probe for - ethercard jumpered to programmed-I/O mode. - */ -static int __init do_el2_probe(struct net_device *dev) -{ - int *addr, addrs[] = { 0xddffe, 0xd9ffe, 0xcdffe, 0xc9ffe, 0}; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return el2_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (addr = addrs; *addr; addr++) { - void __iomem *p = ioremap(*addr, 1); - unsigned base_bits; - int i; - - if (!p) - continue; - base_bits = readb(p); - iounmap(p); - i = ffs(base_bits) - 1; - if (i == -1 || base_bits != (1 << i)) - continue; - if (el2_probe1(dev, netcard_portlist[i]) == 0) - return 0; - dev->irq = irq; - } -#if ! defined(no_probe_nonshared_memory) - return el2_pio_probe(dev); -#else - return -ENODEV; -#endif -} - -/* Try all of the locations that aren't obviously empty. This touches - a lot of locations, and is much riskier than the code above. */ -static int __init -el2_pio_probe(struct net_device *dev) -{ - int i; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return el2_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (i = 0; netcard_portlist[i]; i++) { - if (el2_probe1(dev, netcard_portlist[i]) == 0) - return 0; - dev->irq = irq; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init el2_probe(int unit) -{ - struct net_device *dev = alloc_eip_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_el2_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops el2_netdev_ops = { - .ndo_open = el2_open, - .ndo_stop = el2_close, - - .ndo_start_xmit = eip_start_xmit, - .ndo_tx_timeout = eip_tx_timeout, - .ndo_get_stats = eip_get_stats, - .ndo_set_rx_mode = eip_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = eip_poll, -#endif -}; - -/* Probe for the Etherlink II card at I/O port base IOADDR, - returning non-zero on success. If found, set the station - address and memory parameters in DEVICE. */ -static int __init -el2_probe1(struct net_device *dev, int ioaddr) -{ - int i, iobase_reg, membase_reg, saved_406, wordlength, retval; - static unsigned version_printed; - unsigned long vendor_id; - - if (!request_region(ioaddr, EL2_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - if (!request_region(ioaddr + 0x400, 8, DRV_NAME)) { - retval = -EBUSY; - goto out; - } - - /* Reset and/or avoid any lurking NE2000 */ - if (inb(ioaddr + 0x408) == 0xff) { - mdelay(1); - retval = -ENODEV; - goto out1; - } - - /* We verify that it's a 3C503 board by checking the first three octets - of its ethernet address. */ - iobase_reg = inb(ioaddr+0x403); - membase_reg = inb(ioaddr+0x404); - /* ASIC location registers should be 0 or have only a single bit set. */ - if ((iobase_reg & (iobase_reg - 1)) || - (membase_reg & (membase_reg - 1))) { - retval = -ENODEV; - goto out1; - } - saved_406 = inb_p(ioaddr + 0x406); - outb_p(ECNTRL_RESET|ECNTRL_THIN, ioaddr + 0x406); /* Reset it... */ - outb_p(ECNTRL_THIN, ioaddr + 0x406); - /* Map the station addr PROM into the lower I/O ports. We now check - for both the old and new 3Com prefix */ - outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406); - vendor_id = inb(ioaddr)*0x10000 + inb(ioaddr + 1)*0x100 + inb(ioaddr + 2); - if ((vendor_id != OLD_3COM_ID) && (vendor_id != NEW_3COM_ID)) { - /* Restore the register we frobbed. */ - outb(saved_406, ioaddr + 0x406); - retval = -ENODEV; - goto out1; - } - - if (ei_debug && version_printed++ == 0) - pr_debug("%s", version); - - dev->base_addr = ioaddr; - - pr_info("%s: 3c503 at i/o base %#3x, node ", dev->name, ioaddr); - - /* Retrieve and print the ethernet address. */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + i); - pr_cont("%pM", dev->dev_addr); - - /* Map the 8390 back into the window. */ - outb(ECNTRL_THIN, ioaddr + 0x406); - - /* Check for EL2/16 as described in tech. man. */ - outb_p(E8390_PAGE0, ioaddr + E8390_CMD); - outb_p(0, ioaddr + EN0_DCFG); - outb_p(E8390_PAGE2, ioaddr + E8390_CMD); - wordlength = inb_p(ioaddr + EN0_DCFG) & ENDCFG_WTS; - outb_p(E8390_PAGE0, ioaddr + E8390_CMD); - - /* Probe for, turn on and clear the board's shared memory. */ - if (ei_debug > 2) - pr_cont(" memory jumpers %2.2x ", membase_reg); - outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */ - - /* This should be probed for (or set via an ioctl()) at run-time. - Right now we use a sleazy hack to pass in the interface number - at boot-time via the low bits of the mem_end field. That value is - unused, and the low bits would be discarded even if it was used. */ -#if defined(EI8390_THICK) || defined(EL2_AUI) - ei_status.interface_num = 1; -#else - ei_status.interface_num = dev->mem_end & 0xf; -#endif - pr_cont(", using %sternal xcvr.\n", ei_status.interface_num == 0 ? "in" : "ex"); - - if ((membase_reg & 0xf0) == 0) { - dev->mem_start = 0; - ei_status.name = "3c503-PIO"; - ei_status.mem = NULL; - } else { - dev->mem_start = ((membase_reg & 0xc0) ? 0xD8000 : 0xC8000) + - ((membase_reg & 0xA0) ? 0x4000 : 0); -#define EL2_MEMSIZE (EL2_MB1_STOP_PG - EL2_MB1_START_PG)*256 - ei_status.mem = ioremap(dev->mem_start, EL2_MEMSIZE); - -#ifdef EL2MEMTEST - /* This has never found an error, but someone might care. - Note that it only tests the 2nd 8kB on 16kB 3c503/16 - cards between card addr. 0x2000 and 0x3fff. */ - { /* Check the card's memory. */ - void __iomem *mem_base = ei_status.mem; - unsigned int test_val = 0xbbadf00d; - writel(0xba5eba5e, mem_base); - for (i = sizeof(test_val); i < EL2_MEMSIZE; i+=sizeof(test_val)) { - writel(test_val, mem_base + i); - if (readl(mem_base) != 0xba5eba5e || - readl(mem_base + i) != test_val) { - pr_warning("3c503: memory failure or memory address conflict.\n"); - dev->mem_start = 0; - ei_status.name = "3c503-PIO"; - iounmap(mem_base); - ei_status.mem = NULL; - break; - } - test_val += 0x55555555; - writel(0, mem_base + i); - } - } -#endif /* EL2MEMTEST */ - - if (dev->mem_start) - dev->mem_end = dev->mem_start + EL2_MEMSIZE; - - if (wordlength) { /* No Tx pages to skip over to get to Rx */ - ei_status.priv = 0; - ei_status.name = "3c503/16"; - } else { - ei_status.priv = TX_PAGES * 256; - ei_status.name = "3c503"; - } - } - - /* - Divide up the memory on the card. This is the same regardless of - whether shared-mem or PIO is used. For 16 bit cards (16kB RAM), - we use the entire 8k of bank1 for an Rx ring. We only use 3k - of the bank0 for 2 full size Tx packet slots. For 8 bit cards, - (8kB RAM) we use 3kB of bank1 for two Tx slots, and the remaining - 5kB for an Rx ring. */ - - if (wordlength) { - ei_status.tx_start_page = EL2_MB0_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG; - } else { - ei_status.tx_start_page = EL2_MB1_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES; - } - - /* Finish setting the board's parameters. */ - ei_status.stop_page = EL2_MB1_STOP_PG; - ei_status.word16 = wordlength; - ei_status.reset_8390 = el2_reset_8390; - ei_status.get_8390_hdr = el2_get_8390_hdr; - ei_status.block_input = el2_block_input; - ei_status.block_output = el2_block_output; - - if (dev->irq == 2) - dev->irq = 9; - else if (dev->irq > 5 && dev->irq != 9) { - pr_warning("3c503: configured interrupt %d invalid, will use autoIRQ.\n", - dev->irq); - dev->irq = 0; - } - - ei_status.saved_irq = dev->irq; - - dev->netdev_ops = &el2_netdev_ops; - dev->ethtool_ops = &netdev_ethtool_ops; - - retval = register_netdev(dev); - if (retval) - goto out1; - - if (dev->mem_start) - pr_info("%s: %s - %dkB RAM, 8kB shared mem window at %#6lx-%#6lx.\n", - dev->name, ei_status.name, (wordlength+1)<<3, - dev->mem_start, dev->mem_end-1); - - else - { - ei_status.tx_start_page = EL2_MB1_START_PG; - ei_status.rx_start_page = EL2_MB1_START_PG + TX_PAGES; - pr_info("%s: %s, %dkB RAM, using programmed I/O (REJUMPER for SHARED MEMORY).\n", - dev->name, ei_status.name, (wordlength+1)<<3); - } - release_region(ioaddr + 0x400, 8); - return 0; -out1: - release_region(ioaddr + 0x400, 8); -out: - release_region(ioaddr, EL2_IO_EXTENT); - return retval; -} - -static irqreturn_t el2_probe_interrupt(int irq, void *seen) -{ - *(bool *)seen = true; - return IRQ_HANDLED; -} - -static int -el2_open(struct net_device *dev) -{ - int retval; - - if (dev->irq < 2) { - static const int irqlist[] = {5, 9, 3, 4, 0}; - const int *irqp = irqlist; - - outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ - do { - bool seen; - - retval = request_irq(*irqp, el2_probe_interrupt, 0, - dev->name, &seen); - if (retval == -EBUSY) - continue; - if (retval < 0) - goto err_disable; - - /* Twinkle the interrupt, and check if it's seen. */ - seen = false; - smp_wmb(); - outb_p(0x04 << ((*irqp == 9) ? 2 : *irqp), E33G_IDCFR); - outb_p(0x00, E33G_IDCFR); - msleep(1); - free_irq(*irqp, &seen); - if (!seen) - continue; - - retval = request_irq(dev->irq = *irqp, eip_interrupt, 0, - dev->name, dev); - if (retval == -EBUSY) - continue; - if (retval < 0) - goto err_disable; - break; - } while (*++irqp); - - if (*irqp == 0) { - err_disable: - outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ - return -EAGAIN; - } - } else { - if ((retval = request_irq(dev->irq, eip_interrupt, 0, dev->name, dev))) { - return retval; - } - } - - el2_init_card(dev); - eip_open(dev); - return 0; -} - -static int -el2_close(struct net_device *dev) -{ - free_irq(dev->irq, dev); - dev->irq = ei_status.saved_irq; - outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ - - eip_close(dev); - return 0; -} - -/* This is called whenever we have a unrecoverable failure: - transmit timeout - Bad ring buffer packet header - */ -static void -el2_reset_8390(struct net_device *dev) -{ - if (ei_debug > 1) { - pr_debug("%s: Resetting the 3c503 board...", dev->name); - pr_cont(" %#lx=%#02x %#lx=%#02x %#lx=%#02x...", E33G_IDCFR, inb(E33G_IDCFR), - E33G_CNTRL, inb(E33G_CNTRL), E33G_GACFR, inb(E33G_GACFR)); - } - outb_p(ECNTRL_RESET|ECNTRL_THIN, E33G_CNTRL); - ei_status.txing = 0; - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); - el2_init_card(dev); - if (ei_debug > 1) - pr_cont("done\n"); -} - -/* Initialize the 3c503 GA registers after a reset. */ -static void -el2_init_card(struct net_device *dev) -{ - /* Unmap the station PROM and select the DIX or BNC connector. */ - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); - - /* Set ASIC copy of rx's first and last+1 buffer pages */ - /* These must be the same as in the 8390. */ - outb(ei_status.rx_start_page, E33G_STARTPG); - outb(ei_status.stop_page, E33G_STOPPG); - - /* Point the vector pointer registers somewhere ?harmless?. */ - outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */ - outb(0xff, E33G_VP1); - outb(0x00, E33G_VP0); - /* Turn off all interrupts until we're opened. */ - outb_p(0x00, dev->base_addr + EN0_IMR); - /* Enable IRQs iff started. */ - outb(EGACFR_NORM, E33G_GACFR); - - /* Set the interrupt line. */ - outb_p((0x04 << (dev->irq == 9 ? 2 : dev->irq)), E33G_IDCFR); - outb_p((WRD_COUNT << 1), E33G_DRQCNT); /* Set burst size to 8 */ - outb_p(0x20, E33G_DMAAH); /* Put a valid addr in the GA DMA */ - outb_p(0x00, E33G_DMAAL); - return; /* We always succeed */ -} - -/* - * Either use the shared memory (if enabled on the board) or put the packet - * out through the ASIC FIFO. - */ -static void -el2_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page) -{ - unsigned short int *wrd; - int boguscount; /* timeout counter */ - unsigned short word; /* temporary for better machine code */ - void __iomem *base = ei_status.mem; - - if (ei_status.word16) /* Tx packets go into bank 0 on EL2/16 card */ - outb(EGACFR_RSEL|EGACFR_TCM, E33G_GACFR); - else - outb(EGACFR_NORM, E33G_GACFR); - - if (base) { /* Shared memory transfer */ - memcpy_toio(base + ((start_page - ei_status.tx_start_page) << 8), - buf, count); - outb(EGACFR_NORM, E33G_GACFR); /* Back to bank1 in case on bank0 */ - return; - } - -/* - * No shared memory, put the packet out the other way. - * Set up then start the internal memory transfer to Tx Start Page - */ - - word = (unsigned short)start_page; - outb(word&0xFF, E33G_DMAAH); - outb(word>>8, E33G_DMAAL); - - outb_p((ei_status.interface_num ? ECNTRL_AUI : ECNTRL_THIN ) | ECNTRL_OUTPUT - | ECNTRL_START, E33G_CNTRL); - -/* - * Here I am going to write data to the FIFO as quickly as possible. - * Note that E33G_FIFOH is defined incorrectly. It is really - * E33G_FIFOL, the lowest port address for both the byte and - * word write. Variable 'count' is NOT checked. Caller must supply a - * valid count. Note that I may write a harmless extra byte to the - * 8390 if the byte-count was not even. - */ - wrd = (unsigned short int *) buf; - count = (count + 1) >> 1; - for(;;) - { - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_block_output.\n", dev->name); - el2_reset_8390(dev); - goto blocked; - } - } - if(count > WRD_COUNT) - { - outsw(E33G_FIFOH, wrd, WRD_COUNT); - wrd += WRD_COUNT; - count -= WRD_COUNT; - } - else - { - outsw(E33G_FIFOH, wrd, count); - break; - } - } - blocked:; - outb_p(ei_status.interface_num==0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - -/* Read the 4 byte, page aligned 8390 specific header. */ -static void -el2_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - int boguscount; - void __iomem *base = ei_status.mem; - unsigned short word; - - if (base) { /* Use the shared memory. */ - void __iomem *hdr_start = base + ((ring_page - EL2_MB1_START_PG)<<8); - memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr)); - hdr->count = le16_to_cpu(hdr->count); - return; - } - -/* - * No shared memory, use programmed I/O. - */ - - word = (unsigned short)ring_page; - outb(word&0xFF, E33G_DMAAH); - outb(word>>8, E33G_DMAAL); - - outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT - | ECNTRL_START, E33G_CNTRL); - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_get_8390_hdr.\n", dev->name); - memset(hdr, 0x00, sizeof(struct e8390_pkt_hdr)); - el2_reset_8390(dev); - goto blocked; - } - } - insw(E33G_FIFOH, hdr, (sizeof(struct e8390_pkt_hdr))>> 1); - blocked:; - outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - - -static void -el2_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - int boguscount = 0; - void __iomem *base = ei_status.mem; - unsigned short int *buf; - unsigned short word; - - /* Maybe enable shared memory just be to be safe... nahh.*/ - if (base) { /* Use the shared memory. */ - ring_offset -= (EL2_MB1_START_PG<<8); - if (ring_offset + count > EL2_MEMSIZE) { - /* We must wrap the input move. */ - int semi_count = EL2_MEMSIZE - ring_offset; - memcpy_fromio(skb->data, base + ring_offset, semi_count); - count -= semi_count; - memcpy_fromio(skb->data + semi_count, base + ei_status.priv, count); - } else { - memcpy_fromio(skb->data, base + ring_offset, count); - } - return; - } - -/* - * No shared memory, use programmed I/O. - */ - word = (unsigned short) ring_offset; - outb(word>>8, E33G_DMAAH); - outb(word&0xFF, E33G_DMAAL); - - outb_p((ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI) | ECNTRL_INPUT - | ECNTRL_START, E33G_CNTRL); - -/* - * Here I also try to get data as fast as possible. I am betting that I - * can read one extra byte without clobbering anything in the kernel because - * this would only occur on an odd byte-count and allocation of skb->data - * is word-aligned. Variable 'count' is NOT checked. Caller must check - * for a valid count. - * [This is currently quite safe.... but if one day the 3c503 explodes - * you know where to come looking ;)] - */ - - buf = (unsigned short int *) skb->data; - count = (count + 1) >> 1; - for(;;) - { - boguscount = 0x1000; - while ((inb(E33G_STATUS) & ESTAT_DPRDY) == 0) - { - if(!boguscount--) - { - pr_notice("%s: FIFO blocked in el2_block_input.\n", dev->name); - el2_reset_8390(dev); - goto blocked; - } - } - if(count > WRD_COUNT) - { - insw(E33G_FIFOH, buf, WRD_COUNT); - buf += WRD_COUNT; - count -= WRD_COUNT; - } - else - { - insw(E33G_FIFOH, buf, count); - break; - } - } - blocked:; - outb_p(ei_status.interface_num == 0 ? ECNTRL_THIN : ECNTRL_AUI, E33G_CNTRL); -} - - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, -}; - -#ifdef MODULE -#define MAX_EL2_CARDS 4 /* Max number of EL2 cards per module */ - -static struct net_device *dev_el2[MAX_EL2_CARDS]; -static int io[MAX_EL2_CARDS]; -static int irq[MAX_EL2_CARDS]; -static int xcvr[MAX_EL2_CARDS]; /* choose int. or ext. xcvr */ -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(xcvr, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)"); -MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)"); -MODULE_DESCRIPTION("3Com ISA EtherLink II, II/16 (3c503, 3c503/16) driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ -int __init -init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - pr_notice("3c503.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_eip_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */ - if (do_el2_probe(dev) == 0) { - dev_el2[found++] = dev; - continue; - } - free_netdev(dev); - pr_warning("3c503.c: No 3c503 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: el2_close() handles free_irq */ - release_region(dev->base_addr, EL2_IO_EXTENT); - if (ei_status.mem) - iounmap(ei_status.mem); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_EL2_CARDS; this_dev++) { - struct net_device *dev = dev_el2[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ |