diff options
Diffstat (limited to 'drivers/net/ethernet/8390/e2100.c')
| -rw-r--r-- | drivers/net/ethernet/8390/e2100.c | 489 |
1 files changed, 0 insertions, 489 deletions
diff --git a/drivers/net/ethernet/8390/e2100.c b/drivers/net/ethernet/8390/e2100.c deleted file mode 100644 index ed55ce85ebb..00000000000 --- a/drivers/net/ethernet/8390/e2100.c +++ /dev/null @@ -1,489 +0,0 @@ -/* e2100.c: A Cabletron E2100 series ethernet driver for linux. */ -/* - Written 1993-1994 by Donald Becker. - - Copyright 1994 by Donald Becker. - Copyright 1993 United States Government as represented by the - Director, National Security Agency. This software may be used and - distributed according to the terms of the GNU General Public License, - incorporated herein by reference. - - This is a driver for the Cabletron E2100 series ethercards. - - The Author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - The E2100 series ethercard is a fairly generic shared memory 8390 - implementation. The only unusual aspect is the way the shared memory - registers are set: first you do an inb() in what is normally the - station address region, and the low three bits of next outb() *address* - is used as the write value for that register. Either someone wasn't - too used to dem bit en bites, or they were trying to obfuscate the - programming interface. - - There is an additional complication when setting the window on the packet - buffer. You must first do a read into the packet buffer region with the - low 8 address bits the address setting the page for the start of the packet - buffer window, and then do the above operation. See mem_on() for details. - - One bug on the chip is that even a hard reset won't disable the memory - window, usually resulting in a hung machine if mem_off() isn't called. - If this happens, you must power down the machine for about 30 seconds. -*/ - -static const char version[] = - "e2100.c:v1.01 7/21/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/delay.h> - -#include <asm/io.h> - -#include "8390.h" - -#define DRV_NAME "e2100" - -static int e21_probe_list[] = {0x300, 0x280, 0x380, 0x220, 0}; - -/* Offsets from the base_addr. - Read from the ASIC register, and the low three bits of the next outb() - address is used to set the corresponding register. */ -#define E21_NIC_OFFSET 0 /* Offset to the 8390 NIC. */ -#define E21_ASIC 0x10 -#define E21_MEM_ENABLE 0x10 -#define E21_MEM_ON 0x05 /* Enable memory in 16 bit mode. */ -#define E21_MEM_ON_8 0x07 /* Enable memory in 8 bit mode. */ -#define E21_MEM_BASE 0x11 -#define E21_IRQ_LOW 0x12 /* The low three bits of the IRQ number. */ -#define E21_IRQ_HIGH 0x14 /* The high IRQ bit and media select ... */ -#define E21_MEDIA 0x14 /* (alias). */ -#define E21_ALT_IFPORT 0x02 /* Set to use the other (BNC,AUI) port. */ -#define E21_BIG_MEM 0x04 /* Use a bigger (64K) buffer (we don't) */ -#define E21_SAPROM 0x10 /* Offset to station address data. */ -#define E21_IO_EXTENT 0x20 - -static inline void mem_on(short port, volatile char __iomem *mem_base, - unsigned char start_page ) -{ - /* This is a little weird: set the shared memory window by doing a - read. The low address bits specify the starting page. */ - readb(mem_base+start_page); - inb(port + E21_MEM_ENABLE); - outb(E21_MEM_ON, port + E21_MEM_ENABLE + E21_MEM_ON); -} - -static inline void mem_off(short port) -{ - inb(port + E21_MEM_ENABLE); - outb(0x00, port + E21_MEM_ENABLE); -} - -/* In other drivers I put the TX pages first, but the E2100 window circuitry - is designed to have a 4K Tx region last. The windowing circuitry wraps the - window at 0x2fff->0x0000 so that the packets at e.g. 0x2f00 in the RX ring - appear contiguously in the window. */ -#define E21_RX_START_PG 0x00 /* First page of RX buffer */ -#define E21_RX_STOP_PG 0x30 /* Last page +1 of RX ring */ -#define E21_BIG_RX_STOP_PG 0xF0 /* Last page +1 of RX ring */ -#define E21_TX_START_PG E21_RX_STOP_PG /* First page of TX buffer */ - -static int e21_probe1(struct net_device *dev, int ioaddr); - -static int e21_open(struct net_device *dev); -static void e21_reset_8390(struct net_device *dev); -static void e21_block_input(struct net_device *dev, int count, - struct sk_buff *skb, int ring_offset); -static void e21_block_output(struct net_device *dev, int count, - const unsigned char *buf, int start_page); -static void e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, - int ring_page); -static int e21_open(struct net_device *dev); -static int e21_close(struct net_device *dev); - - -/* Probe for the E2100 series ethercards. These cards have an 8390 at the - base address and the station address at both offset 0x10 and 0x18. I read - the station address from offset 0x18 to avoid the dataport of NE2000 - ethercards, and look for Ctron's unique ID (first three octets of the - station address). - */ - -static int __init do_e2100_probe(struct net_device *dev) -{ - int *port; - int base_addr = dev->base_addr; - int irq = dev->irq; - - if (base_addr > 0x1ff) /* Check a single specified location. */ - return e21_probe1(dev, base_addr); - else if (base_addr != 0) /* Don't probe at all. */ - return -ENXIO; - - for (port = e21_probe_list; *port; port++) { - dev->irq = irq; - if (e21_probe1(dev, *port) == 0) - return 0; - } - - return -ENODEV; -} - -#ifndef MODULE -struct net_device * __init e2100_probe(int unit) -{ - struct net_device *dev = alloc_ei_netdev(); - int err; - - if (!dev) - return ERR_PTR(-ENOMEM); - - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - - err = do_e2100_probe(dev); - if (err) - goto out; - return dev; -out: - free_netdev(dev); - return ERR_PTR(err); -} -#endif - -static const struct net_device_ops e21_netdev_ops = { - .ndo_open = e21_open, - .ndo_stop = e21_close, - - .ndo_start_xmit = ei_start_xmit, - .ndo_tx_timeout = ei_tx_timeout, - .ndo_get_stats = ei_get_stats, - .ndo_set_rx_mode = ei_set_multicast_list, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_change_mtu = eth_change_mtu, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = ei_poll, -#endif -}; - -static int __init e21_probe1(struct net_device *dev, int ioaddr) -{ - int i, status, retval; - unsigned char *station_addr = dev->dev_addr; - static unsigned version_printed; - - if (!request_region(ioaddr, E21_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - /* First check the station address for the Ctron prefix. */ - if (inb(ioaddr + E21_SAPROM + 0) != 0x00 || - inb(ioaddr + E21_SAPROM + 1) != 0x00 || - inb(ioaddr + E21_SAPROM + 2) != 0x1d) { - retval = -ENODEV; - goto out; - } - - /* Verify by making certain that there is a 8390 at there. */ - outb(E8390_NODMA + E8390_STOP, ioaddr); - udelay(1); /* we want to delay one I/O cycle - which is 2MHz */ - status = inb(ioaddr); - if (status != 0x21 && status != 0x23) { - retval = -ENODEV; - goto out; - } - - /* Read the station address PROM. */ - for (i = 0; i < 6; i++) - station_addr[i] = inb(ioaddr + E21_SAPROM + i); - - inb(ioaddr + E21_MEDIA); /* Point to media selection. */ - outb(0, ioaddr + E21_ASIC); /* and disable the secondary interface. */ - - if (ei_debug && version_printed++ == 0) - printk(version); - - for (i = 0; i < 6; i++) - printk(" %02X", station_addr[i]); - - if (dev->irq < 2) { - static const int irqlist[] = {15, 11, 10, 12, 5, 9, 3, 4}; - for (i = 0; i < ARRAY_SIZE(irqlist); i++) - if (request_irq (irqlist[i], NULL, 0, "bogus", NULL) != -EBUSY) { - dev->irq = irqlist[i]; - break; - } - if (i >= ARRAY_SIZE(irqlist)) { - printk(" unable to get IRQ %d.\n", dev->irq); - retval = -EAGAIN; - goto out; - } - } else if (dev->irq == 2) /* Fixup luser bogosity: IRQ2 is really IRQ9 */ - dev->irq = 9; - - /* The 8390 is at the base address. */ - dev->base_addr = ioaddr; - - ei_status.name = "E2100"; - ei_status.word16 = 1; - ei_status.tx_start_page = E21_TX_START_PG; - ei_status.rx_start_page = E21_RX_START_PG; - ei_status.stop_page = E21_RX_STOP_PG; - ei_status.saved_irq = dev->irq; - - /* Check the media port used. The port can be passed in on the - low mem_end bits. */ - if (dev->mem_end & 15) - dev->if_port = dev->mem_end & 7; - else { - dev->if_port = 0; - inb(ioaddr + E21_MEDIA); /* Turn automatic media detection on. */ - for(i = 0; i < 6; i++) - if (station_addr[i] != inb(ioaddr + E21_SAPROM + 8 + i)) { - dev->if_port = 1; - break; - } - } - - /* Never map in the E21 shared memory unless you are actively using it. - Also, the shared memory has effective only one setting -- spread all - over the 128K region! */ - if (dev->mem_start == 0) - dev->mem_start = 0xd0000; - - ei_status.mem = ioremap(dev->mem_start, 2*1024); - if (!ei_status.mem) { - printk("unable to remap memory\n"); - retval = -EAGAIN; - goto out; - } - -#ifdef notdef - /* These values are unused. The E2100 has a 2K window into the packet - buffer. The window can be set to start on any page boundary. */ - ei_status.rmem_start = dev->mem_start + TX_PAGES*256; - dev->mem_end = ei_status.rmem_end = dev->mem_start + 2*1024; -#endif - - printk(", IRQ %d, %s media, memory @ %#lx.\n", dev->irq, - dev->if_port ? "secondary" : "primary", dev->mem_start); - - ei_status.reset_8390 = &e21_reset_8390; - ei_status.block_input = &e21_block_input; - ei_status.block_output = &e21_block_output; - ei_status.get_8390_hdr = &e21_get_8390_hdr; - - dev->netdev_ops = &e21_netdev_ops; - NS8390_init(dev, 0); - - retval = register_netdev(dev); - if (retval) - goto out; - return 0; -out: - release_region(ioaddr, E21_IO_EXTENT); - return retval; -} - -static int -e21_open(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - int retval; - - if ((retval = request_irq(dev->irq, ei_interrupt, 0, dev->name, dev))) - return retval; - - /* Set the interrupt line and memory base on the hardware. */ - inb(ioaddr + E21_IRQ_LOW); - outb(0, ioaddr + E21_ASIC + (dev->irq & 7)); - inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */ - outb(0, ioaddr + E21_ASIC + (dev->irq > 7 ? 1:0) - + (dev->if_port ? E21_ALT_IFPORT : 0)); - inb(ioaddr + E21_MEM_BASE); - outb(0, ioaddr + E21_ASIC + ((dev->mem_start >> 17) & 7)); - - ei_open(dev); - return 0; -} - -static void -e21_reset_8390(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - - outb(0x01, ioaddr); - if (ei_debug > 1) printk("resetting the E2180x3 t=%ld...", jiffies); - ei_status.txing = 0; - - /* Set up the ASIC registers, just in case something changed them. */ - - if (ei_debug > 1) printk("reset done\n"); -} - -/* Grab the 8390 specific header. We put the 2k window so the header page - appears at the start of the shared memory. */ - -static void -e21_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_page) -{ - - short ioaddr = dev->base_addr; - char __iomem *shared_mem = ei_status.mem; - - mem_on(ioaddr, shared_mem, ring_page); - -#ifdef notdef - /* Officially this is what we are doing, but the readl() is faster */ - memcpy_fromio(hdr, shared_mem, sizeof(struct e8390_pkt_hdr)); -#else - ((unsigned int*)hdr)[0] = readl(shared_mem); -#endif - - /* Turn off memory access: we would need to reprogram the window anyway. */ - mem_off(ioaddr); - -} - -/* Block input and output are easy on shared memory ethercards. - The E21xx makes block_input() especially easy by wrapping the top - ring buffer to the bottom automatically. */ -static void -e21_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) -{ - short ioaddr = dev->base_addr; - char __iomem *shared_mem = ei_status.mem; - - mem_on(ioaddr, shared_mem, (ring_offset>>8)); - - memcpy_fromio(skb->data, ei_status.mem + (ring_offset & 0xff), count); - - mem_off(ioaddr); -} - -static void -e21_block_output(struct net_device *dev, int count, const unsigned char *buf, - int start_page) -{ - short ioaddr = dev->base_addr; - volatile char __iomem *shared_mem = ei_status.mem; - - /* Set the shared memory window start by doing a read, with the low address - bits specifying the starting page. */ - readb(shared_mem + start_page); - mem_on(ioaddr, shared_mem, start_page); - - memcpy_toio(shared_mem, buf, count); - mem_off(ioaddr); -} - -static int -e21_close(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - - if (ei_debug > 1) - printk("%s: Shutting down ethercard.\n", dev->name); - - free_irq(dev->irq, dev); - dev->irq = ei_status.saved_irq; - - /* Shut off the interrupt line and secondary interface. */ - inb(ioaddr + E21_IRQ_LOW); - outb(0, ioaddr + E21_ASIC); - inb(ioaddr + E21_IRQ_HIGH); /* High IRQ bit, and if_port. */ - outb(0, ioaddr + E21_ASIC); - - ei_close(dev); - - /* Double-check that the memory has been turned off, because really - really bad things happen if it isn't. */ - mem_off(ioaddr); - - return 0; -} - - -#ifdef MODULE -#define MAX_E21_CARDS 4 /* Max number of E21 cards per module */ -static struct net_device *dev_e21[MAX_E21_CARDS]; -static int io[MAX_E21_CARDS]; -static int irq[MAX_E21_CARDS]; -static int mem[MAX_E21_CARDS]; -static int xcvr[MAX_E21_CARDS]; /* choose int. or ext. xcvr */ - -module_param_array(io, int, NULL, 0); -module_param_array(irq, int, NULL, 0); -module_param_array(mem, int, NULL, 0); -module_param_array(xcvr, int, NULL, 0); -MODULE_PARM_DESC(io, "I/O base address(es)"); -MODULE_PARM_DESC(irq, "IRQ number(s)"); -MODULE_PARM_DESC(mem, " memory base address(es)"); -MODULE_PARM_DESC(xcvr, "transceiver(s) (0=internal, 1=external)"); -MODULE_DESCRIPTION("Cabletron E2100 ISA ethernet driver"); -MODULE_LICENSE("GPL"); - -/* This is set up so that only a single autoprobe takes place per call. -ISA device autoprobes on a running machine are not recommended. */ - -int __init init_module(void) -{ - struct net_device *dev; - int this_dev, found = 0; - - for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) { - if (io[this_dev] == 0) { - if (this_dev != 0) break; /* only autoprobe 1st one */ - printk(KERN_NOTICE "e2100.c: Presently autoprobing (not recommended) for a single card.\n"); - } - dev = alloc_ei_netdev(); - if (!dev) - break; - dev->irq = irq[this_dev]; - dev->base_addr = io[this_dev]; - dev->mem_start = mem[this_dev]; - dev->mem_end = xcvr[this_dev]; /* low 4bits = xcvr sel. */ - if (do_e2100_probe(dev) == 0) { - dev_e21[found++] = dev; - continue; - } - free_netdev(dev); - printk(KERN_WARNING "e2100.c: No E2100 card found (i/o = 0x%x).\n", io[this_dev]); - break; - } - if (found) - return 0; - return -ENXIO; -} - -static void cleanup_card(struct net_device *dev) -{ - /* NB: e21_close() handles free_irq */ - iounmap(ei_status.mem); - release_region(dev->base_addr, E21_IO_EXTENT); -} - -void __exit -cleanup_module(void) -{ - int this_dev; - - for (this_dev = 0; this_dev < MAX_E21_CARDS; this_dev++) { - struct net_device *dev = dev_e21[this_dev]; - if (dev) { - unregister_netdev(dev); - cleanup_card(dev); - free_netdev(dev); - } - } -} -#endif /* MODULE */ |