diff options
Diffstat (limited to 'drivers/net/ethernet/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/Kconfig | 177 |
1 files changed, 177 insertions, 0 deletions
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig new file mode 100644 index 00000000000..6dff5a0e733 --- /dev/null +++ b/drivers/net/ethernet/Kconfig @@ -0,0 +1,177 @@ +# +# Ethernet LAN device configuration +# + +menuconfig ETHERNET + bool "Ethernet driver support" + depends on NET + default y + ---help--- + This section contains all the Ethernet device drivers. + +if ETHERNET + +config MDIO + tristate + +config SUNGEM_PHY + tristate + +source "drivers/net/ethernet/3com/Kconfig" +source "drivers/net/ethernet/adaptec/Kconfig" +source "drivers/net/ethernet/aeroflex/Kconfig" +source "drivers/net/ethernet/alteon/Kconfig" +source "drivers/net/ethernet/amd/Kconfig" +source "drivers/net/ethernet/apple/Kconfig" +source "drivers/net/ethernet/atheros/Kconfig" +source "drivers/net/ethernet/cadence/Kconfig" +source "drivers/net/ethernet/adi/Kconfig" +source "drivers/net/ethernet/broadcom/Kconfig" +source "drivers/net/ethernet/brocade/Kconfig" +source "drivers/net/ethernet/chelsio/Kconfig" +source "drivers/net/ethernet/cirrus/Kconfig" +source "drivers/net/ethernet/cisco/Kconfig" +source "drivers/net/ethernet/davicom/Kconfig" + +config DNET + tristate "Dave ethernet support (DNET)" + depends on HAS_IOMEM + select PHYLIB + ---help--- + The Dave ethernet interface (DNET) is found on Qong Board FPGA. + Say Y to include support for the DNET chip. + + To compile this driver as a module, choose M here: the module + will be called dnet. + +source "drivers/net/ethernet/dec/Kconfig" +source "drivers/net/ethernet/dlink/Kconfig" +source "drivers/net/ethernet/emulex/Kconfig" +source "drivers/net/ethernet/neterion/Kconfig" +source "drivers/net/ethernet/faraday/Kconfig" +source "drivers/net/ethernet/freescale/Kconfig" +source "drivers/net/ethernet/fujitsu/Kconfig" +source "drivers/net/ethernet/hp/Kconfig" +source "drivers/net/ethernet/ibm/Kconfig" +source "drivers/net/ethernet/intel/Kconfig" +source "drivers/net/ethernet/i825xx/Kconfig" +source "drivers/net/ethernet/xscale/Kconfig" +source "drivers/net/ethernet/icplus/Kconfig" + +config JME + tristate "JMicron(R) PCI-Express Gigabit Ethernet support" + depends on PCI + select CRC32 + select NET_CORE + select MII + ---help--- + This driver supports the PCI-Express gigabit ethernet adapters + based on JMicron JMC250 chipset. + + To compile this driver as a module, choose M here. The module + will be called jme. + +config KORINA + tristate "Korina (IDT RC32434) Ethernet support" + depends on MIKROTIK_RB532 + ---help--- + If you have a Mikrotik RouterBoard 500 or IDT RC32434 + based system say Y. Otherwise say N. + +config LANTIQ_ETOP + tristate "Lantiq SoC ETOP driver" + depends on SOC_TYPE_XWAY + ---help--- + Support for the MII0 inside the Lantiq SoC + +source "drivers/net/ethernet/marvell/Kconfig" +source "drivers/net/ethernet/mellanox/Kconfig" +source "drivers/net/ethernet/micrel/Kconfig" +source "drivers/net/ethernet/microchip/Kconfig" + +config MIPS_SIM_NET + tristate "MIPS simulator Network device" + depends on MIPS_SIM + ---help--- + The MIPSNET device is a simple Ethernet network device which is + emulated by the MIPS Simulator. + If you are not using a MIPSsim or are unsure, say N. + +source "drivers/net/ethernet/myricom/Kconfig" + +config FEALNX + tristate "Myson MTD-8xx PCI Ethernet support" + depends on PCI + select CRC32 + select NET_CORE + select MII + ---help--- + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet + cards. <http://www.myson.com.tw/> + +source "drivers/net/ethernet/natsemi/Kconfig" +source "drivers/net/ethernet/8390/Kconfig" + +config NET_NETX + tristate "NetX Ethernet support" + select NET_CORE + select MII + depends on ARCH_NETX + ---help--- + This is support for the Hilscher netX builtin Ethernet ports + + To compile this driver as a module, choose M here. The module + will be called netx-eth. + +source "drivers/net/ethernet/nuvoton/Kconfig" +source "drivers/net/ethernet/nvidia/Kconfig" +source "drivers/net/ethernet/octeon/Kconfig" +source "drivers/net/ethernet/oki-semi/Kconfig" + +config ETHOC + tristate "OpenCores 10/100 Mbps Ethernet MAC support" + depends on HAS_IOMEM && HAS_DMA + select NET_CORE + select MII + select PHYLIB + select CRC32 + select BITREVERSE + ---help--- + Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC. + +source "drivers/net/ethernet/packetengines/Kconfig" +source "drivers/net/ethernet/pasemi/Kconfig" +source "drivers/net/ethernet/qlogic/Kconfig" +source "drivers/net/ethernet/racal/Kconfig" +source "drivers/net/ethernet/realtek/Kconfig" +source "drivers/net/ethernet/renesas/Kconfig" +source "drivers/net/ethernet/rdc/Kconfig" + +config S6GMAC + tristate "S6105 GMAC ethernet support" + depends on XTENSA_VARIANT_S6000 + select PHYLIB + ---help--- + This driver supports the on chip ethernet device on the + S6105 xtensa processor. + + To compile this driver as a module, choose M here. The module + will be called s6gmac. + +source "drivers/net/ethernet/seeq/Kconfig" +source "drivers/net/ethernet/sis/Kconfig" +source "drivers/net/ethernet/sfc/Kconfig" +source "drivers/net/ethernet/sgi/Kconfig" +source "drivers/net/ethernet/smsc/Kconfig" +source "drivers/net/ethernet/stmicro/Kconfig" +source "drivers/net/ethernet/sun/Kconfig" +source "drivers/net/ethernet/tehuti/Kconfig" +source "drivers/net/ethernet/ti/Kconfig" +source "drivers/net/ethernet/tile/Kconfig" +source "drivers/net/ethernet/toshiba/Kconfig" +source "drivers/net/ethernet/tundra/Kconfig" +source "drivers/net/ethernet/via/Kconfig" +source "drivers/net/ethernet/xilinx/Kconfig" +source "drivers/net/ethernet/xircom/Kconfig" + +endif # ETHERNET |