diff options
Diffstat (limited to 'drivers/net/ethernet/adi/bfin_mac.c')
| -rw-r--r-- | drivers/net/ethernet/adi/bfin_mac.c | 1767 |
1 files changed, 1767 insertions, 0 deletions
diff --git a/drivers/net/ethernet/adi/bfin_mac.c b/drivers/net/ethernet/adi/bfin_mac.c new file mode 100644 index 00000000000..b6d69c91db9 --- /dev/null +++ b/drivers/net/ethernet/adi/bfin_mac.c @@ -0,0 +1,1767 @@ +/* + * Blackfin On-Chip MAC Driver + * + * Copyright 2004-2010 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#define DRV_VERSION "1.1" +#define DRV_DESC "Blackfin on-chip Ethernet MAC driver" + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/crc32.h> +#include <linux/device.h> +#include <linux/spinlock.h> +#include <linux/mii.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/skbuff.h> +#include <linux/platform_device.h> + +#include <asm/dma.h> +#include <linux/dma-mapping.h> + +#include <asm/div64.h> +#include <asm/dpmc.h> +#include <asm/blackfin.h> +#include <asm/cacheflush.h> +#include <asm/portmux.h> +#include <mach/pll.h> + +#include "bfin_mac.h" + +MODULE_AUTHOR("Bryan Wu, Luke Yang"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION(DRV_DESC); +MODULE_ALIAS("platform:bfin_mac"); + +#if defined(CONFIG_BFIN_MAC_USE_L1) +# define bfin_mac_alloc(dma_handle, size, num) l1_data_sram_zalloc(size*num) +# define bfin_mac_free(dma_handle, ptr, num) l1_data_sram_free(ptr) +#else +# define bfin_mac_alloc(dma_handle, size, num) \ + dma_alloc_coherent(NULL, size*num, dma_handle, GFP_KERNEL) +# define bfin_mac_free(dma_handle, ptr, num) \ + dma_free_coherent(NULL, sizeof(*ptr)*num, ptr, dma_handle) +#endif + +#define PKT_BUF_SZ 1580 + +#define MAX_TIMEOUT_CNT 500 + +/* pointers to maintain transmit list */ +static struct net_dma_desc_tx *tx_list_head; +static struct net_dma_desc_tx *tx_list_tail; +static struct net_dma_desc_rx *rx_list_head; +static struct net_dma_desc_rx *rx_list_tail; +static struct net_dma_desc_rx *current_rx_ptr; +static struct net_dma_desc_tx *current_tx_ptr; +static struct net_dma_desc_tx *tx_desc; +static struct net_dma_desc_rx *rx_desc; + +static void desc_list_free(void) +{ + struct net_dma_desc_rx *r; + struct net_dma_desc_tx *t; + int i; +#if !defined(CONFIG_BFIN_MAC_USE_L1) + dma_addr_t dma_handle = 0; +#endif + + if (tx_desc) { + t = tx_list_head; + for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) { + if (t) { + if (t->skb) { + dev_kfree_skb(t->skb); + t->skb = NULL; + } + t = t->next; + } + } + bfin_mac_free(dma_handle, tx_desc, CONFIG_BFIN_TX_DESC_NUM); + } + + if (rx_desc) { + r = rx_list_head; + for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) { + if (r) { + if (r->skb) { + dev_kfree_skb(r->skb); + r->skb = NULL; + } + r = r->next; + } + } + bfin_mac_free(dma_handle, rx_desc, CONFIG_BFIN_RX_DESC_NUM); + } +} + +static int desc_list_init(void) +{ + int i; + struct sk_buff *new_skb; +#if !defined(CONFIG_BFIN_MAC_USE_L1) + /* + * This dma_handle is useless in Blackfin dma_alloc_coherent(). + * The real dma handler is the return value of dma_alloc_coherent(). + */ + dma_addr_t dma_handle; +#endif + + tx_desc = bfin_mac_alloc(&dma_handle, + sizeof(struct net_dma_desc_tx), + CONFIG_BFIN_TX_DESC_NUM); + if (tx_desc == NULL) + goto init_error; + + rx_desc = bfin_mac_alloc(&dma_handle, + sizeof(struct net_dma_desc_rx), + CONFIG_BFIN_RX_DESC_NUM); + if (rx_desc == NULL) + goto init_error; + + /* init tx_list */ + tx_list_head = tx_list_tail = tx_desc; + + for (i = 0; i < CONFIG_BFIN_TX_DESC_NUM; i++) { + struct net_dma_desc_tx *t = tx_desc + i; + struct dma_descriptor *a = &(t->desc_a); + struct dma_descriptor *b = &(t->desc_b); + + /* + * disable DMA + * read from memory WNR = 0 + * wordsize is 32 bits + * 6 half words is desc size + * large desc flow + */ + a->config = WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; + a->start_addr = (unsigned long)t->packet; + a->x_count = 0; + a->next_dma_desc = b; + + /* + * enabled DMA + * write to memory WNR = 1 + * wordsize is 32 bits + * disable interrupt + * 6 half words is desc size + * large desc flow + */ + b->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; + b->start_addr = (unsigned long)(&(t->status)); + b->x_count = 0; + + t->skb = NULL; + tx_list_tail->desc_b.next_dma_desc = a; + tx_list_tail->next = t; + tx_list_tail = t; + } + tx_list_tail->next = tx_list_head; /* tx_list is a circle */ + tx_list_tail->desc_b.next_dma_desc = &(tx_list_head->desc_a); + current_tx_ptr = tx_list_head; + + /* init rx_list */ + rx_list_head = rx_list_tail = rx_desc; + + for (i = 0; i < CONFIG_BFIN_RX_DESC_NUM; i++) { + struct net_dma_desc_rx *r = rx_desc + i; + struct dma_descriptor *a = &(r->desc_a); + struct dma_descriptor *b = &(r->desc_b); + + /* allocate a new skb for next time receive */ + new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN); + if (!new_skb) { + pr_notice("init: low on mem - packet dropped\n"); + goto init_error; + } + skb_reserve(new_skb, NET_IP_ALIGN); + /* Invidate the data cache of skb->data range when it is write back + * cache. It will prevent overwritting the new data from DMA + */ + blackfin_dcache_invalidate_range((unsigned long)new_skb->head, + (unsigned long)new_skb->end); + r->skb = new_skb; + + /* + * enabled DMA + * write to memory WNR = 1 + * wordsize is 32 bits + * disable interrupt + * 6 half words is desc size + * large desc flow + */ + a->config = DMAEN | WNR | WDSIZE_32 | NDSIZE_6 | DMAFLOW_LARGE; + /* since RXDWA is enabled */ + a->start_addr = (unsigned long)new_skb->data - 2; + a->x_count = 0; + a->next_dma_desc = b; + + /* + * enabled DMA + * write to memory WNR = 1 + * wordsize is 32 bits + * enable interrupt + * 6 half words is desc size + * large desc flow + */ + b->config = DMAEN | WNR | WDSIZE_32 | DI_EN | + NDSIZE_6 | DMAFLOW_LARGE; + b->start_addr = (unsigned long)(&(r->status)); + b->x_count = 0; + + rx_list_tail->desc_b.next_dma_desc = a; + rx_list_tail->next = r; + rx_list_tail = r; + } + rx_list_tail->next = rx_list_head; /* rx_list is a circle */ + rx_list_tail->desc_b.next_dma_desc = &(rx_list_head->desc_a); + current_rx_ptr = rx_list_head; + + return 0; + +init_error: + desc_list_free(); + pr_err("kmalloc failed\n"); + return -ENOMEM; +} + + +/*---PHY CONTROL AND CONFIGURATION-----------------------------------------*/ + +/* + * MII operations + */ +/* Wait until the previous MDC/MDIO transaction has completed */ +static int bfin_mdio_poll(void) +{ + int timeout_cnt = MAX_TIMEOUT_CNT; + + /* poll the STABUSY bit */ + while ((bfin_read_EMAC_STAADD()) & STABUSY) { + udelay(1); + if (timeout_cnt-- < 0) { + pr_err("wait MDC/MDIO transaction to complete timeout\n"); + return -ETIMEDOUT; + } + } + + return 0; +} + +/* Read an off-chip register in a PHY through the MDC/MDIO port */ +static int bfin_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) +{ + int ret; + + ret = bfin_mdio_poll(); + if (ret) + return ret; + + /* read mode */ + bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) | + SET_REGAD((u16) regnum) | + STABUSY); + + ret = bfin_mdio_poll(); + if (ret) + return ret; + + return (int) bfin_read_EMAC_STADAT(); +} + +/* Write an off-chip register in a PHY through the MDC/MDIO port */ +static int bfin_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, + u16 value) +{ + int ret; + + ret = bfin_mdio_poll(); + if (ret) + return ret; + + bfin_write_EMAC_STADAT((u32) value); + + /* write mode */ + bfin_write_EMAC_STAADD(SET_PHYAD((u16) phy_addr) | + SET_REGAD((u16) regnum) | + STAOP | + STABUSY); + + return bfin_mdio_poll(); +} + +static int bfin_mdiobus_reset(struct mii_bus *bus) +{ + return 0; +} + +static void bfin_mac_adjust_link(struct net_device *dev) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + struct phy_device *phydev = lp->phydev; + unsigned long flags; + int new_state = 0; + + spin_lock_irqsave(&lp->lock, flags); + if (phydev->link) { + /* Now we make sure that we can be in full duplex mode. + * If not, we operate in half-duplex mode. */ + if (phydev->duplex != lp->old_duplex) { + u32 opmode = bfin_read_EMAC_OPMODE(); + new_state = 1; + + if (phydev->duplex) + opmode |= FDMODE; + else + opmode &= ~(FDMODE); + + bfin_write_EMAC_OPMODE(opmode); + lp->old_duplex = phydev->duplex; + } + + if (phydev->speed != lp->old_speed) { + if (phydev->interface == PHY_INTERFACE_MODE_RMII) { + u32 opmode = bfin_read_EMAC_OPMODE(); + switch (phydev->speed) { + case 10: + opmode |= RMII_10; + break; + case 100: + opmode &= ~RMII_10; + break; + default: + netdev_warn(dev, + "Ack! Speed (%d) is not 10/100!\n", + phydev->speed); + break; + } + bfin_write_EMAC_OPMODE(opmode); + } + + new_state = 1; + lp->old_speed = phydev->speed; + } + + if (!lp->old_link) { + new_state = 1; + lp->old_link = 1; + } + } else if (lp->old_link) { + new_state = 1; + lp->old_link = 0; + lp->old_speed = 0; + lp->old_duplex = -1; + } + + if (new_state) { + u32 opmode = bfin_read_EMAC_OPMODE(); + phy_print_status(phydev); + pr_debug("EMAC_OPMODE = 0x%08x\n", opmode); + } + + spin_unlock_irqrestore(&lp->lock, flags); +} + +/* MDC = 2.5 MHz */ +#define MDC_CLK 2500000 + +static int mii_probe(struct net_device *dev, int phy_mode) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + struct phy_device *phydev = NULL; + unsigned short sysctl; + int i; + u32 sclk, mdc_div; + + /* Enable PHY output early */ + if (!(bfin_read_VR_CTL() & CLKBUFOE)) + bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE); + + sclk = get_sclk(); + mdc_div = ((sclk / MDC_CLK) / 2) - 1; + + sysctl = bfin_read_EMAC_SYSCTL(); + sysctl = (sysctl & ~MDCDIV) | SET_MDCDIV(mdc_div); + bfin_write_EMAC_SYSCTL(sysctl); + + /* search for connected PHY device */ + for (i = 0; i < PHY_MAX_ADDR; ++i) { + struct phy_device *const tmp_phydev = lp->mii_bus->phy_map[i]; + + if (!tmp_phydev) + continue; /* no PHY here... */ + + phydev = tmp_phydev; + break; /* found it */ + } + + /* now we are supposed to have a proper phydev, to attach to... */ + if (!phydev) { + netdev_err(dev, "no phy device found\n"); + return -ENODEV; + } + + if (phy_mode != PHY_INTERFACE_MODE_RMII && + phy_mode != PHY_INTERFACE_MODE_MII) { + netdev_err(dev, "invalid phy interface mode\n"); + return -EINVAL; + } + + phydev = phy_connect(dev, dev_name(&phydev->dev), &bfin_mac_adjust_link, + 0, phy_mode); + + if (IS_ERR(phydev)) { + netdev_err(dev, "could not attach PHY\n"); + return PTR_ERR(phydev); + } + + /* mask with MAC supported features */ + phydev->supported &= (SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_Autoneg + | SUPPORTED_Pause | SUPPORTED_Asym_Pause + | SUPPORTED_MII + | SUPPORTED_TP); + + phydev->advertising = phydev->supported; + + lp->old_link = 0; + lp->old_speed = 0; + lp->old_duplex = -1; + lp->phydev = phydev; + + pr_info("attached PHY driver [%s] " + "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)@sclk=%dMHz)\n", + phydev->drv->name, dev_name(&phydev->dev), phydev->irq, + MDC_CLK, mdc_div, sclk/1000000); + + return 0; +} + +/* + * Ethtool support + */ + +/* + * interrupt routine for magic packet wakeup + */ +static irqreturn_t bfin_mac_wake_interrupt(int irq, void *dev_id) +{ + return IRQ_HANDLED; +} + +static int +bfin_mac_ethtool_getsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + + if (lp->phydev) + return phy_ethtool_gset(lp->phydev, cmd); + + return -EINVAL; +} + +static int +bfin_mac_ethtool_setsettings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + if (lp->phydev) + return phy_ethtool_sset(lp->phydev, cmd); + + return -EINVAL; +} + +static void bfin_mac_ethtool_getdrvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + strcpy(info->driver, KBUILD_MODNAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, dev_name(&dev->dev)); +} + +static void bfin_mac_ethtool_getwol(struct net_device *dev, + struct ethtool_wolinfo *wolinfo) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + + wolinfo->supported = WAKE_MAGIC; + wolinfo->wolopts = lp->wol; +} + +static int bfin_mac_ethtool_setwol(struct net_device *dev, + struct ethtool_wolinfo *wolinfo) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + int rc; + + if (wolinfo->wolopts & (WAKE_MAGICSECURE | + WAKE_UCAST | + WAKE_MCAST | + WAKE_BCAST | + WAKE_ARP)) + return -EOPNOTSUPP; + + lp->wol = wolinfo->wolopts; + + if (lp->wol && !lp->irq_wake_requested) { + /* register wake irq handler */ + rc = request_irq(IRQ_MAC_WAKEDET, bfin_mac_wake_interrupt, + IRQF_DISABLED, "EMAC_WAKE", dev); + if (rc) + return rc; + lp->irq_wake_requested = true; + } + + if (!lp->wol && lp->irq_wake_requested) { + free_irq(IRQ_MAC_WAKEDET, dev); + lp->irq_wake_requested = false; + } + + /* Make sure the PHY driver doesn't suspend */ + device_init_wakeup(&dev->dev, lp->wol); + + return 0; +} + +static const struct ethtool_ops bfin_mac_ethtool_ops = { + .get_settings = bfin_mac_ethtool_getsettings, + .set_settings = bfin_mac_ethtool_setsettings, + .get_link = ethtool_op_get_link, + .get_drvinfo = bfin_mac_ethtool_getdrvinfo, + .get_wol = bfin_mac_ethtool_getwol, + .set_wol = bfin_mac_ethtool_setwol, +}; + +/**************************************************************************/ +static void setup_system_regs(struct net_device *dev) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + int i; + unsigned short sysctl; + + /* + * Odd word alignment for Receive Frame DMA word + * Configure checksum support and rcve frame word alignment + */ + sysctl = bfin_read_EMAC_SYSCTL(); + /* + * check if interrupt is requested for any PHY, + * enable PHY interrupt only if needed + */ + for (i = 0; i < PHY_MAX_ADDR; ++i) + if (lp->mii_bus->irq[i] != PHY_POLL) + break; + if (i < PHY_MAX_ADDR) + sysctl |= PHYIE; + sysctl |= RXDWA; +#if defined(BFIN_MAC_CSUM_OFFLOAD) + sysctl |= RXCKS; +#else + sysctl &= ~RXCKS; +#endif + bfin_write_EMAC_SYSCTL(sysctl); + + bfin_write_EMAC_MMC_CTL(RSTC | CROLL); + + /* Set vlan regs to let 1522 bytes long packets pass through */ + bfin_write_EMAC_VLAN1(lp->vlan1_mask); + bfin_write_EMAC_VLAN2(lp->vlan2_mask); + + /* Initialize the TX DMA channel registers */ + bfin_write_DMA2_X_COUNT(0); + bfin_write_DMA2_X_MODIFY(4); + bfin_write_DMA2_Y_COUNT(0); + bfin_write_DMA2_Y_MODIFY(0); + + /* Initialize the RX DMA channel registers */ + bfin_write_DMA1_X_COUNT(0); + bfin_write_DMA1_X_MODIFY(4); + bfin_write_DMA1_Y_COUNT(0); + bfin_write_DMA1_Y_MODIFY(0); +} + +static void setup_mac_addr(u8 *mac_addr) +{ + u32 addr_low = le32_to_cpu(*(__le32 *) & mac_addr[0]); + u16 addr_hi = le16_to_cpu(*(__le16 *) & mac_addr[4]); + + /* this depends on a little-endian machine */ + bfin_write_EMAC_ADDRLO(addr_low); + bfin_write_EMAC_ADDRHI(addr_hi); +} + +static int bfin_mac_set_mac_address(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + if (netif_running(dev)) + return -EBUSY; + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + setup_mac_addr(dev->dev_addr); + return 0; +} + +#ifdef CONFIG_BFIN_MAC_USE_HWSTAMP +#define bfin_mac_hwtstamp_is_none(cfg) ((cfg) == HWTSTAMP_FILTER_NONE) + +static int bfin_mac_hwtstamp_ioctl(struct net_device *netdev, + struct ifreq *ifr, int cmd) +{ + struct hwtstamp_config config; + struct bfin_mac_local *lp = netdev_priv(netdev); + u16 ptpctl; + u32 ptpfv1, ptpfv2, ptpfv3, ptpfoff; + + if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) + return -EFAULT; + + pr_debug("%s config flag:0x%x, tx_type:0x%x, rx_filter:0x%x\n", + __func__, config.flags, config.tx_type, config.rx_filter); + + /* reserved for future extensions */ + if (config.flags) + return -EINVAL; + + if ((config.tx_type != HWTSTAMP_TX_OFF) && + (config.tx_type != HWTSTAMP_TX_ON)) + return -ERANGE; + + ptpctl = bfin_read_EMAC_PTP_CTL(); + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + /* + * Dont allow any timestamping + */ + ptpfv3 = 0xFFFFFFFF; + bfin_write_EMAC_PTP_FV3(ptpfv3); + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + /* + * Clear the five comparison mask bits (bits[12:8]) in EMAC_PTP_CTL) + * to enable all the field matches. + */ + ptpctl &= ~0x1F00; + bfin_write_EMAC_PTP_CTL(ptpctl); + /* + * Keep the default values of the EMAC_PTP_FOFF register. + */ + ptpfoff = 0x4A24170C; + bfin_write_EMAC_PTP_FOFF(ptpfoff); + /* + * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2 + * registers. + */ + ptpfv1 = 0x11040800; + bfin_write_EMAC_PTP_FV1(ptpfv1); + ptpfv2 = 0x0140013F; + bfin_write_EMAC_PTP_FV2(ptpfv2); + /* + * The default value (0xFFFC) allows the timestamping of both + * received Sync messages and Delay_Req messages. + */ + ptpfv3 = 0xFFFFFFFC; + bfin_write_EMAC_PTP_FV3(ptpfv3); + + config.rx_filter = HWTSTAMP_FILTER_PTP_V1_L4_EVENT; + break; + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + /* Clear all five comparison mask bits (bits[12:8]) in the + * EMAC_PTP_CTL register to enable all the field matches. + */ + ptpctl &= ~0x1F00; + bfin_write_EMAC_PTP_CTL(ptpctl); + /* + * Keep the default values of the EMAC_PTP_FOFF register, except set + * the PTPCOF field to 0x2A. + */ + ptpfoff = 0x2A24170C; + bfin_write_EMAC_PTP_FOFF(ptpfoff); + /* + * Keep the default values of the EMAC_PTP_FV1 and EMAC_PTP_FV2 + * registers. + */ + ptpfv1 = 0x11040800; + bfin_write_EMAC_PTP_FV1(ptpfv1); + ptpfv2 = 0x0140013F; + bfin_write_EMAC_PTP_FV2(ptpfv2); + /* + * To allow the timestamping of Pdelay_Req and Pdelay_Resp, set + * the value to 0xFFF0. + */ + ptpfv3 = 0xFFFFFFF0; + bfin_write_EMAC_PTP_FV3(ptpfv3); + + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L4_EVENT; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + /* + * Clear bits 8 and 12 of the EMAC_PTP_CTL register to enable only the + * EFTM and PTPCM field comparison. + */ + ptpctl &= ~0x1100; + bfin_write_EMAC_PTP_CTL(ptpctl); + /* + * Keep the default values of all the fields of the EMAC_PTP_FOFF + * register, except set the PTPCOF field to 0x0E. + */ + ptpfoff = 0x0E24170C; + bfin_write_EMAC_PTP_FOFF(ptpfoff); + /* + * Program bits [15:0] of the EMAC_PTP_FV1 register to 0x88F7, which + * corresponds to PTP messages on the MAC layer. + */ + ptpfv1 = 0x110488F7; + bfin_write_EMAC_PTP_FV1(ptpfv1); + ptpfv2 = 0x0140013F; + bfin_write_EMAC_PTP_FV2(ptpfv2); + /* + * To allow the timestamping of Pdelay_Req and Pdelay_Resp + * messages, set the value to 0xFFF0. + */ + ptpfv3 = 0xFFFFFFF0; + bfin_write_EMAC_PTP_FV3(ptpfv3); + + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; + break; + default: + return -ERANGE; + } + + if (config.tx_type == HWTSTAMP_TX_OFF && + bfin_mac_hwtstamp_is_none(config.rx_filter)) { + ptpctl &= ~PTP_EN; + bfin_write_EMAC_PTP_CTL(ptpctl); + + SSYNC(); + } else { + ptpctl |= PTP_EN; + bfin_write_EMAC_PTP_CTL(ptpctl); + + /* + * clear any existing timestamp + */ + bfin_read_EMAC_PTP_RXSNAPLO(); + bfin_read_EMAC_PTP_RXSNAPHI(); + + bfin_read_EMAC_PTP_TXSNAPLO(); + bfin_read_EMAC_PTP_TXSNAPHI(); + + /* + * Set registers so that rollover occurs soon to test this. + */ + bfin_write_EMAC_PTP_TIMELO(0x00000000); + bfin_write_EMAC_PTP_TIMEHI(0xFF800000); + + SSYNC(); + + lp->compare.last_update = 0; + timecounter_init(&lp->clock, + &lp->cycles, + ktime_to_ns(ktime_get_real())); + timecompare_update(&lp->compare, 0); + } + + lp->stamp_cfg = config; + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; +} + +static void bfin_dump_hwtamp(char *s, ktime_t *hw, ktime_t *ts, struct timecompare *cmp) +{ + ktime_t sys = ktime_get_real(); + + pr_debug("%s %s hardware:%d,%d transform system:%d,%d system:%d,%d, cmp:%lld, %lld\n", + __func__, s, hw->tv.sec, hw->tv.nsec, ts->tv.sec, ts->tv.nsec, sys.tv.sec, + sys.tv.nsec, cmp->offset, cmp->skew); +} + +static void bfin_tx_hwtstamp(struct net_device *netdev, struct sk_buff *skb) +{ + struct bfin_mac_local *lp = netdev_priv(netdev); + + if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) { + int timeout_cnt = MAX_TIMEOUT_CNT; + + /* When doing time stamping, keep the connection to the socket + * a while longer + */ + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + + /* + * The timestamping is done at the EMAC module's MII/RMII interface + * when the module sees the Start of Frame of an event message packet. This + * interface is the closest possible place to the physical Ethernet transmission + * medium, providing the best timing accuracy. + */ + while ((!(bfin_read_EMAC_PTP_ISTAT() & TXTL)) && (--timeout_cnt)) + udelay(1); + if (timeout_cnt == 0) + netdev_err(netdev, "timestamp the TX packet failed\n"); + else { + struct skb_shared_hwtstamps shhwtstamps; + u64 ns; + u64 regval; + + regval = bfin_read_EMAC_PTP_TXSNAPLO(); + regval |= (u64)bfin_read_EMAC_PTP_TXSNAPHI() << 32; + memset(&shhwtstamps, 0, sizeof(shhwtstamps)); + ns = timecounter_cyc2time(&lp->clock, + regval); + timecompare_update(&lp->compare, ns); + shhwtstamps.hwtstamp = ns_to_ktime(ns); + shhwtstamps.syststamp = + timecompare_transform(&lp->compare, ns); + skb_tstamp_tx(skb, &shhwtstamps); + + bfin_dump_hwtamp("TX", &shhwtstamps.hwtstamp, &shhwtstamps.syststamp, &lp->compare); + } + } +} + +static void bfin_rx_hwtstamp(struct net_device *netdev, struct sk_buff *skb) +{ + struct bfin_mac_local *lp = netdev_priv(netdev); + u32 valid; + u64 regval, ns; + struct skb_shared_hwtstamps *shhwtstamps; + + if (bfin_mac_hwtstamp_is_none(lp->stamp_cfg.rx_filter)) + return; + + valid = bfin_read_EMAC_PTP_ISTAT() & RXEL; + if (!valid) + return; + + shhwtstamps = skb_hwtstamps(skb); + + regval = bfin_read_EMAC_PTP_RXSNAPLO(); + regval |= (u64)bfin_read_EMAC_PTP_RXSNAPHI() << 32; + ns = timecounter_cyc2time(&lp->clock, regval); + timecompare_update(&lp->compare, ns); + memset(shhwtstamps, 0, sizeof(*shhwtstamps)); + shhwtstamps->hwtstamp = ns_to_ktime(ns); + shhwtstamps->syststamp = timecompare_transform(&lp->compare, ns); + + bfin_dump_hwtamp("RX", &shhwtstamps->hwtstamp, &shhwtstamps->syststamp, &lp->compare); +} + +/* + * bfin_read_clock - read raw cycle counter (to be used by time counter) + */ +static cycle_t bfin_read_clock(const struct cyclecounter *tc) +{ + u64 stamp; + + stamp = bfin_read_EMAC_PTP_TIMELO(); + stamp |= (u64)bfin_read_EMAC_PTP_TIMEHI() << 32ULL; + + return stamp; +} + +#define PTP_CLK 25000000 + +static void bfin_mac_hwtstamp_init(struct net_device *netdev) +{ + struct bfin_mac_local *lp = netdev_priv(netdev); + u64 append; + + /* Initialize hardware timer */ + append = PTP_CLK * (1ULL << 32); + do_div(append, get_sclk()); + bfin_write_EMAC_PTP_ADDEND((u32)append); + + memset(&lp->cycles, 0, sizeof(lp->cycles)); + lp->cycles.read = bfin_read_clock; + lp->cycles.mask = CLOCKSOURCE_MASK(64); + lp->cycles.mult = 1000000000 / PTP_CLK; + lp->cycles.shift = 0; + + /* Synchronize our NIC clock against system wall clock */ + memset(&lp->compare, 0, sizeof(lp->compare)); + lp->compare.source = &lp->clock; + lp->compare.target = ktime_get_real; + lp->compare.num_samples = 10; + + /* Initialize hwstamp config */ + lp->stamp_cfg.rx_filter = HWTSTAMP_FILTER_NONE; + lp->stamp_cfg.tx_type = HWTSTAMP_TX_OFF; +} + +#else +# define bfin_mac_hwtstamp_is_none(cfg) 0 +# define bfin_mac_hwtstamp_init(dev) +# define bfin_mac_hwtstamp_ioctl(dev, ifr, cmd) (-EOPNOTSUPP) +# define bfin_rx_hwtstamp(dev, skb) +# define bfin_tx_hwtstamp(dev, skb) +#endif + +static inline void _tx_reclaim_skb(void) +{ + do { + tx_list_head->desc_a.config &= ~DMAEN; + tx_list_head->status.status_word = 0; + if (tx_list_head->skb) { + dev_kfree_skb(tx_list_head->skb); + tx_list_head->skb = NULL; + } + tx_list_head = tx_list_head->next; + + } while (tx_list_head->status.status_word != 0); +} + +static void tx_reclaim_skb(struct bfin_mac_local *lp) +{ + int timeout_cnt = MAX_TIMEOUT_CNT; + + if (tx_list_head->status.status_word != 0) + _tx_reclaim_skb(); + + if (current_tx_ptr->next == tx_list_head) { + while (tx_list_head->status.status_word == 0) { + /* slow down polling to avoid too many queue stop. */ + udelay(10); + /* reclaim skb if DMA is not running. */ + if (!(bfin_read_DMA2_IRQ_STATUS() & DMA_RUN)) + break; + if (timeout_cnt-- < 0) + break; + } + + if (timeout_cnt >= 0) + _tx_reclaim_skb(); + else + netif_stop_queue(lp->ndev); + } + + if (current_tx_ptr->next != tx_list_head && + netif_queue_stopped(lp->ndev)) + netif_wake_queue(lp->ndev); + + if (tx_list_head != current_tx_ptr) { + /* shorten the timer interval if tx queue is stopped */ + if (netif_queue_stopped(lp->ndev)) + lp->tx_reclaim_timer.expires = + jiffies + (TX_RECLAIM_JIFFIES >> 4); + else + lp->tx_reclaim_timer.expires = + jiffies + TX_RECLAIM_JIFFIES; + + mod_timer(&lp->tx_reclaim_timer, + lp->tx_reclaim_timer.expires); + } + + return; +} + +static void tx_reclaim_skb_timeout(unsigned long lp) +{ + tx_reclaim_skb((struct bfin_mac_local *)lp); +} + +static int bfin_mac_hard_start_xmit(struct sk_buff *skb, + struct net_device *dev) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + u16 *data; + u32 data_align = (unsigned long)(skb->data) & 0x3; + + current_tx_ptr->skb = skb; + + if (data_align == 0x2) { + /* move skb->data to current_tx_ptr payload */ + data = (u16 *)(skb->data) - 1; + *data = (u16)(skb->len); + /* + * When transmitting an Ethernet packet, the PTP_TSYNC module requires + * a DMA_Length_Word field associated with the packet. The lower 12 bits + * of this field are the length of the packet payload in bytes and the higher + * 4 bits are the timestamping enable field. + */ + if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) + *data |= 0x1000; + + current_tx_ptr->desc_a.start_addr = (u32)data; + /* this is important! */ + blackfin_dcache_flush_range((u32)data, + (u32)((u8 *)data + skb->len + 4)); + } else { + *((u16 *)(current_tx_ptr->packet)) = (u16)(skb->len); + /* enable timestamping for the sent packet */ + if (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) + *((u16 *)(current_tx_ptr->packet)) |= 0x1000; + memcpy((u8 *)(current_tx_ptr->packet + 2), skb->data, + skb->len); + current_tx_ptr->desc_a.start_addr = + (u32)current_tx_ptr->packet; + blackfin_dcache_flush_range( + (u32)current_tx_ptr->packet, + (u32)(current_tx_ptr->packet + skb->len + 2)); + } + + /* make sure the internal data buffers in the core are drained + * so that the DMA descriptors are completely written when the + * DMA engine goes to fetch them below + */ + SSYNC(); + + /* always clear status buffer before start tx dma */ + current_tx_ptr->status.status_word = 0; + + /* enable this packet's dma */ + current_tx_ptr->desc_a.config |= DMAEN; + + /* tx dma is running, just return */ + if (bfin_read_DMA2_IRQ_STATUS() & DMA_RUN) + goto out; + + /* tx dma is not running */ + bfin_write_DMA2_NEXT_DESC_PTR(&(current_tx_ptr->desc_a)); + /* dma enabled, read from memory, size is 6 */ + bfin_write_DMA2_CONFIG(current_tx_ptr->desc_a.config); + /* Turn on the EMAC tx */ + bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE); + +out: + bfin_tx_hwtstamp(dev, skb); + + current_tx_ptr = current_tx_ptr->next; + dev->stats.tx_packets++; + dev->stats.tx_bytes += (skb->len); + + tx_reclaim_skb(lp); + + return NETDEV_TX_OK; +} + +#define IP_HEADER_OFF 0 +#define RX_ERROR_MASK (RX_LONG | RX_ALIGN | RX_CRC | RX_LEN | \ + RX_FRAG | RX_ADDR | RX_DMAO | RX_PHY | RX_LATE | RX_RANGE) + +static void bfin_mac_rx(struct net_device *dev) +{ + struct sk_buff *skb, *new_skb; + unsigned short len; + struct bfin_mac_local *lp __maybe_unused = netdev_priv(dev); +#if defined(BFIN_MAC_CSUM_OFFLOAD) + unsigned int i; + unsigned char fcs[ETH_FCS_LEN + 1]; +#endif + + /* check if frame status word reports an error condition + * we which case we simply drop the packet + */ + if (current_rx_ptr->status.status_word & RX_ERROR_MASK) { + netdev_notice(dev, "rx: receive error - packet dropped\n"); + dev->stats.rx_dropped++; + goto out; + } + + /* allocate a new skb for next time receive */ + skb = current_rx_ptr->skb; + + new_skb = dev_alloc_skb(PKT_BUF_SZ + NET_IP_ALIGN); + if (!new_skb) { + netdev_notice(dev, "rx: low on mem - packet dropped\n"); + dev->stats.rx_dropped++; + goto out; + } + /* reserve 2 bytes for RXDWA padding */ + skb_reserve(new_skb, NET_IP_ALIGN); + /* Invidate the data cache of skb->data range when it is write back + * cache. It will prevent overwritting the new data from DMA + */ + blackfin_dcache_invalidate_range((unsigned long)new_skb->head, + (unsigned long)new_skb->end); + + current_rx_ptr->skb = new_skb; + current_rx_ptr->desc_a.start_addr = (unsigned long)new_skb->data - 2; + + len = (unsigned short)((current_rx_ptr->status.status_word) & RX_FRLEN); + /* Deduce Ethernet FCS length from Ethernet payload length */ + len -= ETH_FCS_LEN; + skb_put(skb, len); + + skb->protocol = eth_type_trans(skb, dev); + + bfin_rx_hwtstamp(dev, skb); + +#if defined(BFIN_MAC_CSUM_OFFLOAD) + /* Checksum offloading only works for IPv4 packets with the standard IP header + * length of 20 bytes, because the blackfin MAC checksum calculation is + * based on that assumption. We must NOT use the calculated checksum if our + * IP version or header break that assumption. + */ + if (skb->data[IP_HEADER_OFF] == 0x45) { + skb->csum = current_rx_ptr->status.ip_payload_csum; + /* + * Deduce Ethernet FCS from hardware generated IP payload checksum. + * IP checksum is based on 16-bit one's complement algorithm. + * To deduce a value from checksum is equal to add its inversion. + * If the IP payload len is odd, the inversed FCS should also + * begin from odd address and leave first byte zero. + */ + if (skb->len % 2) { + fcs[0] = 0; + for (i = 0; i < ETH_FCS_LEN; i++) + fcs[i + 1] = ~skb->data[skb->len + i]; + skb->csum = csum_partial(fcs, ETH_FCS_LEN + 1, skb->csum); + } else { + for (i = 0; i < ETH_FCS_LEN; i++) + fcs[i] = ~skb->data[skb->len + i]; + skb->csum = csum_partial(fcs, ETH_FCS_LEN, skb->csum); + } + skb->ip_summed = CHECKSUM_COMPLETE; + } +#endif + + netif_rx(skb); + dev->stats.rx_packets++; + dev->stats.rx_bytes += len; +out: + current_rx_ptr->status.status_word = 0x00000000; + current_rx_ptr = current_rx_ptr->next; +} + +/* interrupt routine to handle rx and error signal */ +static irqreturn_t bfin_mac_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + int number = 0; + +get_one_packet: + if (current_rx_ptr->status.status_word == 0) { + /* no more new packet received */ + if (number == 0) { + if (current_rx_ptr->next->status.status_word != 0) { + current_rx_ptr = current_rx_ptr->next; + goto real_rx; + } + } + bfin_write_DMA1_IRQ_STATUS(bfin_read_DMA1_IRQ_STATUS() | + DMA_DONE | DMA_ERR); + return IRQ_HANDLED; + } + +real_rx: + bfin_mac_rx(dev); + number++; + goto get_one_packet; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void bfin_mac_poll(struct net_device *dev) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + + disable_irq(IRQ_MAC_RX); + bfin_mac_interrupt(IRQ_MAC_RX, dev); + tx_reclaim_skb(lp); + enable_irq(IRQ_MAC_RX); +} +#endif /* CONFIG_NET_POLL_CONTROLLER */ + +static void bfin_mac_disable(void) +{ + unsigned int opmode; + + opmode = bfin_read_EMAC_OPMODE(); + opmode &= (~RE); + opmode &= (~TE); + /* Turn off the EMAC */ + bfin_write_EMAC_OPMODE(opmode); +} + +/* + * Enable Interrupts, Receive, and Transmit + */ +static int bfin_mac_enable(struct phy_device *phydev) +{ + int ret; + u32 opmode; + + pr_debug("%s\n", __func__); + + /* Set RX DMA */ + bfin_write_DMA1_NEXT_DESC_PTR(&(rx_list_head->desc_a)); + bfin_write_DMA1_CONFIG(rx_list_head->desc_a.config); + + /* Wait MII done */ + ret = bfin_mdio_poll(); + if (ret) + return ret; + + /* We enable only RX here */ + /* ASTP : Enable Automatic Pad Stripping + PR : Promiscuous Mode for test + PSF : Receive frames with total length less than 64 bytes. + FDMODE : Full Duplex Mode + LB : Internal Loopback for test + RE : Receiver Enable */ + opmode = bfin_read_EMAC_OPMODE(); + if (opmode & FDMODE) + opmode |= PSF; + else + opmode |= DRO | DC | PSF; + opmode |= RE; + + if (phydev->interface == PHY_INTERFACE_MODE_RMII) { + opmode |= RMII; /* For Now only 100MBit are supported */ +#if defined(CONFIG_BF537) || defined(CONFIG_BF536) + if (__SILICON_REVISION__ < 3) { + /* + * This isn't publicly documented (fun times!), but in + * silicon <=0.2, the RX and TX pins are clocked together. + * So in order to recv, we must enable the transmit side + * as well. This will cause a spurious TX interrupt too, + * but we can easily consume that. + */ + opmode |= TE; + } +#endif + } + + /* Turn on the EMAC rx */ + bfin_write_EMAC_OPMODE(opmode); + + return 0; +} + +/* Our watchdog timed out. Called by the networking layer */ +static void bfin_mac_timeout(struct net_device *dev) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + + pr_debug("%s: %s\n", dev->name, __func__); + + bfin_mac_disable(); + + del_timer(&lp->tx_reclaim_timer); + + /* reset tx queue and free skb */ + while (tx_list_head != current_tx_ptr) { + tx_list_head->desc_a.config &= ~DMAEN; + tx_list_head->status.status_word = 0; + if (tx_list_head->skb) { + dev_kfree_skb(tx_list_head->skb); + tx_list_head->skb = NULL; + } + tx_list_head = tx_list_head->next; + } + + if (netif_queue_stopped(lp->ndev)) + netif_wake_queue(lp->ndev); + + bfin_mac_enable(lp->phydev); + + /* We can accept TX packets again */ + dev->trans_start = jiffies; /* prevent tx timeout */ + netif_wake_queue(dev); +} + +static void bfin_mac_multicast_hash(struct net_device *dev) +{ + u32 emac_hashhi, emac_hashlo; + struct netdev_hw_addr *ha; + u32 crc; + + emac_hashhi = emac_hashlo = 0; + + netdev_for_each_mc_addr(ha, dev) { + crc = ether_crc(ETH_ALEN, ha->addr); + crc >>= 26; + + if (crc & 0x20) + emac_hashhi |= 1 << (crc & 0x1f); + else + emac_hashlo |= 1 << (crc & 0x1f); + } + + bfin_write_EMAC_HASHHI(emac_hashhi); + bfin_write_EMAC_HASHLO(emac_hashlo); +} + +/* + * This routine will, depending on the values passed to it, + * either make it accept multicast packets, go into + * promiscuous mode (for TCPDUMP and cousins) or accept + * a select set of multicast packets + */ +static void bfin_mac_set_multicast_list(struct net_device *dev) +{ + u32 sysctl; + + if (dev->flags & IFF_PROMISC) { + netdev_info(dev, "set promisc mode\n"); + sysctl = bfin_read_EMAC_OPMODE(); + sysctl |= PR; + bfin_write_EMAC_OPMODE(sysctl); + } else if (dev->flags & IFF_ALLMULTI) { + /* accept all multicast */ + sysctl = bfin_read_EMAC_OPMODE(); + sysctl |= PAM; + bfin_write_EMAC_OPMODE(sysctl); + } else if (!netdev_mc_empty(dev)) { + /* set up multicast hash table */ + sysctl = bfin_read_EMAC_OPMODE(); + sysctl |= HM; + bfin_write_EMAC_OPMODE(sysctl); + bfin_mac_multicast_hash(dev); + } else { + /* clear promisc or multicast mode */ + sysctl = bfin_read_EMAC_OPMODE(); + sysctl &= ~(RAF | PAM); + bfin_write_EMAC_OPMODE(sysctl); + } +} + +static int bfin_mac_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + struct bfin_mac_local *lp = netdev_priv(netdev); + + if (!netif_running(netdev)) + return -EINVAL; + + switch (cmd) { + case SIOCSHWTSTAMP: + return bfin_mac_hwtstamp_ioctl(netdev, ifr, cmd); + default: + if (lp->phydev) + return phy_mii_ioctl(lp->phydev, ifr, cmd); + else + return -EOPNOTSUPP; + } +} + +/* + * this puts the device in an inactive state + */ +static void bfin_mac_shutdown(struct net_device *dev) +{ + /* Turn off the EMAC */ + bfin_write_EMAC_OPMODE(0x00000000); + /* Turn off the EMAC RX DMA */ + bfin_write_DMA1_CONFIG(0x0000); + bfin_write_DMA2_CONFIG(0x0000); +} + +/* + * Open and Initialize the interface + * + * Set up everything, reset the card, etc.. + */ +static int bfin_mac_open(struct net_device *dev) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + int ret; + pr_debug("%s: %s\n", dev->name, __func__); + + /* + * Check that the address is valid. If its not, refuse + * to bring the device up. The user must specify an + * address using ifconfig eth0 hw ether xx:xx:xx:xx:xx:xx + */ + if (!is_valid_ether_addr(dev->dev_addr)) { + netdev_warn(dev, "no valid ethernet hw addr\n"); + return -EINVAL; + } + + /* initial rx and tx list */ + ret = desc_list_init(); + if (ret) + return ret; + + phy_start(lp->phydev); + phy_write(lp->phydev, MII_BMCR, BMCR_RESET); + setup_system_regs(dev); + setup_mac_addr(dev->dev_addr); + + bfin_mac_disable(); + ret = bfin_mac_enable(lp->phydev); + if (ret) + return ret; + pr_debug("hardware init finished\n"); + + netif_start_queue(dev); + netif_carrier_on(dev); + + return 0; +} + +/* + * this makes the board clean up everything that it can + * and not talk to the outside world. Caused by + * an 'ifconfig ethX down' + */ +static int bfin_mac_close(struct net_device *dev) +{ + struct bfin_mac_local *lp = netdev_priv(dev); + pr_debug("%s: %s\n", dev->name, __func__); + + netif_stop_queue(dev); + netif_carrier_off(dev); + + phy_stop(lp->phydev); + phy_write(lp->phydev, MII_BMCR, BMCR_PDOWN); + + /* clear everything */ + bfin_mac_shutdown(dev); + + /* free the rx/tx buffers */ + desc_list_free(); + + return 0; +} + +static const struct net_device_ops bfin_mac_netdev_ops = { + .ndo_open = bfin_mac_open, + .ndo_stop = bfin_mac_close, + .ndo_start_xmit = bfin_mac_hard_start_xmit, + .ndo_set_mac_address = bfin_mac_set_mac_address, + .ndo_tx_timeout = bfin_mac_timeout, + .ndo_set_rx_mode = bfin_mac_set_multicast_list, + .ndo_do_ioctl = bfin_mac_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_change_mtu = eth_change_mtu, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = bfin_mac_poll, +#endif +}; + +static int __devinit bfin_mac_probe(struct platform_device *pdev) +{ + struct net_device *ndev; + struct bfin_mac_local *lp; + struct platform_device *pd; + struct bfin_mii_bus_platform_data *mii_bus_data; + int rc; + + ndev = alloc_etherdev(sizeof(struct bfin_mac_local)); + if (!ndev) { + dev_err(&pdev->dev, "Cannot allocate net device!\n"); + return -ENOMEM; + } + + SET_NETDEV_DEV(ndev, &pdev->dev); + platform_set_drvdata(pdev, ndev); + lp = netdev_priv(ndev); + lp->ndev = ndev; + + /* Grab the MAC address in the MAC */ + *(__le32 *) (&(ndev->dev_addr[0])) = cpu_to_le32(bfin_read_EMAC_ADDRLO()); + *(__le16 *) (&(ndev->dev_addr[4])) = cpu_to_le16((u16) bfin_read_EMAC_ADDRHI()); + + /* probe mac */ + /*todo: how to proble? which is revision_register */ + bfin_write_EMAC_ADDRLO(0x12345678); + if (bfin_read_EMAC_ADDRLO() != 0x12345678) { + dev_err(&pdev->dev, "Cannot detect Blackfin on-chip ethernet MAC controller!\n"); + rc = -ENODEV; + goto out_err_probe_mac; + } + + + /* + * Is it valid? (Did bootloader initialize it?) + * Grab the MAC from the board somehow + * this is done in the arch/blackfin/mach-bfxxx/boards/eth_mac.c + */ + if (!is_valid_ether_addr(ndev->dev_addr)) + bfin_get_ether_addr(ndev->dev_addr); + + /* If still not valid, get a random one */ + if (!is_valid_ether_addr(ndev->dev_addr)) + random_ether_addr(ndev->dev_addr); + + setup_mac_addr(ndev->dev_addr); + + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "Cannot get platform device bfin_mii_bus!\n"); + rc = -ENODEV; + goto out_err_probe_mac; + } + pd = pdev->dev.platform_data; + lp->mii_bus = platform_get_drvdata(pd); + if (!lp->mii_bus) { + dev_err(&pdev->dev, "Cannot get mii_bus!\n"); + rc = -ENODEV; + goto out_err_probe_mac; + } + lp->mii_bus->priv = ndev; + mii_bus_data = pd->dev.platform_data; + + rc = mii_probe(ndev, mii_bus_data->phy_mode); + if (rc) { + dev_err(&pdev->dev, "MII Probe failed!\n"); + goto out_err_mii_probe; + } + + lp->vlan1_mask = ETH_P_8021Q | mii_bus_data->vlan1_mask; + lp->vlan2_mask = ETH_P_8021Q | mii_bus_data->vlan2_mask; + + /* Fill in the fields of the device structure with ethernet values. */ + ether_setup(ndev); + + ndev->netdev_ops = &bfin_mac_netdev_ops; + ndev->ethtool_ops = &bfin_mac_ethtool_ops; + + init_timer(&lp->tx_reclaim_timer); + lp->tx_reclaim_timer.data = (unsigned long)lp; + lp->tx_reclaim_timer.function = tx_reclaim_skb_timeout; + + spin_lock_init(&lp->lock); + + /* now, enable interrupts */ + /* register irq handler */ + rc = request_irq(IRQ_MAC_RX, bfin_mac_interrupt, + IRQF_DISABLED, "EMAC_RX", ndev); + if (rc) { + dev_err(&pdev->dev, "Cannot request Blackfin MAC RX IRQ!\n"); + rc = -EBUSY; + goto out_err_request_irq; + } + + rc = register_netdev(ndev); + if (rc) { + dev_err(&pdev->dev, "Cannot register net device!\n"); + goto out_err_reg_ndev; + } + + bfin_mac_hwtstamp_init(ndev); + + /* now, print out the card info, in a short format.. */ + netdev_info(ndev, "%s, Version %s\n", DRV_DESC, DRV_VERSION); + + return 0; + +out_err_reg_ndev: + free_irq(IRQ_MAC_RX, ndev); +out_err_request_irq: +out_err_mii_probe: + mdiobus_unregister(lp->mii_bus); + mdiobus_free(lp->mii_bus); +out_err_probe_mac: + platform_set_drvdata(pdev, NULL); + free_netdev(ndev); + + return rc; +} + +static int __devexit bfin_mac_remove(struct platform_device *pdev) +{ + struct net_device *ndev = platform_get_drvdata(pdev); + struct bfin_mac_local *lp = netdev_priv(ndev); + + platform_set_drvdata(pdev, NULL); + + lp->mii_bus->priv = NULL; + + unregister_netdev(ndev); + + free_irq(IRQ_MAC_RX, ndev); + + free_netdev(ndev); + + return 0; +} + +#ifdef CONFIG_PM +static int bfin_mac_suspend(struct platform_device *pdev, pm_message_t mesg) +{ + struct net_device *net_dev = platform_get_drvdata(pdev); + struct bfin_mac_local *lp = netdev_priv(net_dev); + + if (lp->wol) { + bfin_write_EMAC_OPMODE((bfin_read_EMAC_OPMODE() & ~TE) | RE); + bfin_write_EMAC_WKUP_CTL(MPKE); + enable_irq_wake(IRQ_MAC_WAKEDET); + } else { + if (netif_running(net_dev)) + bfin_mac_close(net_dev); + } + + return 0; +} + +static int bfin_mac_resume(struct platform_device *pdev) +{ + struct net_device *net_dev = platform_get_drvdata(pdev); + struct bfin_mac_local *lp = netdev_priv(net_dev); + + if (lp->wol) { + bfin_write_EMAC_OPMODE(bfin_read_EMAC_OPMODE() | TE); + bfin_write_EMAC_WKUP_CTL(0); + disable_irq_wake(IRQ_MAC_WAKEDET); + } else { + if (netif_running(net_dev)) + bfin_mac_open(net_dev); + } + + return 0; +} +#else +#define bfin_mac_suspend NULL +#define bfin_mac_resume NULL +#endif /* CONFIG_PM */ + +static int __devinit bfin_mii_bus_probe(struct platform_device *pdev) +{ + struct mii_bus *miibus; + struct bfin_mii_bus_platform_data *mii_bus_pd; + const unsigned short *pin_req; + int rc, i; + + mii_bus_pd = dev_get_platdata(&pdev->dev); + if (!mii_bus_pd) { + dev_err(&pdev->dev, "No peripherals in platform data!\n"); + return -EINVAL; + } + + /* + * We are setting up a network card, + * so set the GPIO pins to Ethernet mode + */ + pin_req = mii_bus_pd->mac_peripherals; + rc = peripheral_request_list(pin_req, KBUILD_MODNAME); + if (rc) { + dev_err(&pdev->dev, "Requesting peripherals failed!\n"); + return rc; + } + + rc = -ENOMEM; + miibus = mdiobus_alloc(); + if (miibus == NULL) + goto out_err_alloc; + miibus->read = bfin_mdiobus_read; + miibus->write = bfin_mdiobus_write; + miibus->reset = bfin_mdiobus_reset; + + miibus->parent = &pdev->dev; + miibus->name = "bfin_mii_bus"; + miibus->phy_mask = mii_bus_pd->phy_mask; + + snprintf(miibus->id, MII_BUS_ID_SIZE, "0"); + miibus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); + if (!miibus->irq) + goto out_err_irq_alloc; + + for (i = rc; i < PHY_MAX_ADDR; ++i) + miibus->irq[i] = PHY_POLL; + + rc = clamp(mii_bus_pd->phydev_number, 0, PHY_MAX_ADDR); + if (rc != mii_bus_pd->phydev_number) + dev_err(&pdev->dev, "Invalid number (%i) of phydevs\n", + mii_bus_pd->phydev_number); + for (i = 0; i < rc; ++i) { + unsigned short phyaddr = mii_bus_pd->phydev_data[i].addr; + if (phyaddr < PHY_MAX_ADDR) + miibus->irq[phyaddr] = mii_bus_pd->phydev_data[i].irq; + else + dev_err(&pdev->dev, + "Invalid PHY address %i for phydev %i\n", + phyaddr, i); + } + + rc = mdiobus_register(miibus); + if (rc) { + dev_err(&pdev->dev, "Cannot register MDIO bus!\n"); + goto out_err_mdiobus_register; + } + + platform_set_drvdata(pdev, miibus); + return 0; + +out_err_mdiobus_register: + kfree(miibus->irq); +out_err_irq_alloc: + mdiobus_free(miibus); +out_err_alloc: + peripheral_free_list(pin_req); + + return rc; +} + +static int __devexit bfin_mii_bus_remove(struct platform_device *pdev) +{ + struct mii_bus *miibus = platform_get_drvdata(pdev); + struct bfin_mii_bus_platform_data *mii_bus_pd = + dev_get_platdata(&pdev->dev); + + platform_set_drvdata(pdev, NULL); + mdiobus_unregister(miibus); + kfree(miibus->irq); + mdiobus_free(miibus); + peripheral_free_list(mii_bus_pd->mac_peripherals); + + return 0; +} + +static struct platform_driver bfin_mii_bus_driver = { + .probe = bfin_mii_bus_probe, + .remove = __devexit_p(bfin_mii_bus_remove), + .driver = { + .name = "bfin_mii_bus", + .owner = THIS_MODULE, + }, +}; + +static struct platform_driver bfin_mac_driver = { + .probe = bfin_mac_probe, + .remove = __devexit_p(bfin_mac_remove), + .resume = bfin_mac_resume, + .suspend = bfin_mac_suspend, + .driver = { + .name = KBUILD_MODNAME, + .owner = THIS_MODULE, + }, +}; + +static int __init bfin_mac_init(void) +{ + int ret; + ret = platform_driver_register(&bfin_mii_bus_driver); + if (!ret) + return platform_driver_register(&bfin_mac_driver); + return -ENODEV; +} + +module_init(bfin_mac_init); + +static void __exit bfin_mac_cleanup(void) +{ + platform_driver_unregister(&bfin_mac_driver); + platform_driver_unregister(&bfin_mii_bus_driver); +} + +module_exit(bfin_mac_cleanup); + |