diff options
Diffstat (limited to 'drivers/net/ethernet/atheros')
-rw-r--r-- | drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/atheros/atl1c/atl1c_hw.h | 34 | ||||
-rw-r--r-- | drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 40 |
3 files changed, 49 insertions, 27 deletions
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c b/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c index 3feb846d40e..859ea844ba0 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c @@ -153,7 +153,7 @@ static void atl1c_get_regs(struct net_device *netdev, AT_READ_REG(hw, REG_LINK_CTRL, p++); AT_READ_REG(hw, REG_IDLE_STATUS, p++); AT_READ_REG(hw, REG_MDIO_CTRL, p++); - AT_READ_REG(hw, REG_SERDES_LOCK, p++); + AT_READ_REG(hw, REG_SERDES, p++); AT_READ_REG(hw, REG_MAC_CTRL, p++); AT_READ_REG(hw, REG_MAC_IPG_IFG, p++); AT_READ_REG(hw, REG_MAC_STA_ADDR, p++); diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h index cb2d20b6998..113e67bf179 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_hw.h @@ -327,18 +327,28 @@ int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, #define BIST1_FUSE_FLAG 0x4 /* SerDes Lock Detect Control and Status Register */ -#define REG_SERDES_LOCK 0x1424 -#define SERDES_LOCK_DETECT 0x1 /* SerDes lock detected. This signal - * comes from Analog SerDes */ -#define SERDES_LOCK_DETECT_EN 0x2 /* 1: Enable SerDes Lock detect function */ -#define SERDES_LOCK_STS_SELFB_PLL_SHIFT 0xE -#define SERDES_LOCK_STS_SELFB_PLL_MASK 0x3 -#define SERDES_OVCLK_18_25 0x0 -#define SERDES_OVCLK_12_18 0x1 -#define SERDES_OVCLK_0_4 0x2 -#define SERDES_OVCLK_4_12 0x3 -#define SERDES_MAC_CLK_SLOWDOWN 0x20000 -#define SERDES_PYH_CLK_SLOWDOWN 0x40000 +#define REG_SERDES 0x1424 +#define SERDES_PHY_CLK_SLOWDOWN BIT(18) +#define SERDES_MAC_CLK_SLOWDOWN BIT(17) +#define SERDES_SELFB_PLL_MASK 0x3UL +#define SERDES_SELFB_PLL_SHIFT 14 +#define SERDES_PHYCLK_SEL_GTX BIT(13) /* 1:gtx_clk, 0:25M */ +#define SERDES_PCIECLK_SEL_SRDS BIT(12) /* 1:serdes,0:25M */ +#define SERDES_BUFS_RX_EN BIT(11) +#define SERDES_PD_RX BIT(10) +#define SERDES_PLL_EN BIT(9) +#define SERDES_EN BIT(8) +#define SERDES_SELFB_PLL_SEL_CSR BIT(6) /* 0:state-machine,1:csr */ +#define SERDES_SELFB_PLL_CSR_MASK 0x3UL +#define SERDES_SELFB_PLL_CSR_SHIFT 4 +#define SERDES_SELFB_PLL_CSR_4 3 /* 4-12% OV-CLK */ +#define SERDES_SELFB_PLL_CSR_0 2 /* 0-4% OV-CLK */ +#define SERDES_SELFB_PLL_CSR_12 1 /* 12-18% OV-CLK */ +#define SERDES_SELFB_PLL_CSR_18 0 /* 18-25% OV-CLK */ +#define SERDES_VCO_SLOW BIT(3) +#define SERDES_VCO_FAST BIT(2) +#define SERDES_LOCK_DETECT_EN BIT(1) +#define SERDES_LOCK_DETECT BIT(0) /* MAC Control Register */ #define REG_MAC_CTRL 0x1480 diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index f0f348bf6c1..cf78287d0e5 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1008,7 +1008,6 @@ static void atl1c_configure_des_ring(struct atl1c_adapter *adapter) struct atl1c_rrd_ring *rrd_ring = &adapter->rrd_ring; struct atl1c_tpd_ring *tpd_ring = (struct atl1c_tpd_ring *) adapter->tpd_ring; - u32 data; /* TPD */ AT_WRITE_REG(hw, REG_TX_BASE_ADDR_HI, @@ -1052,13 +1051,6 @@ static void atl1c_configure_des_ring(struct atl1c_adapter *adapter) AT_WRITE_REG(hw, REG_TXF_WATER_MARK, 0); /* TX watermark, to enter l1 state.*/ AT_WRITE_REG(hw, REG_RXD_DMA_CTRL, 0); /* RXD threshold.*/ } - if (hw->nic_type == athr_l2c_b || hw->nic_type == athr_l1d_2) { - /* Power Saving for L2c_B */ - AT_READ_REG(hw, REG_SERDES_LOCK, &data); - data |= SERDES_MAC_CLK_SLOWDOWN; - data |= SERDES_PYH_CLK_SLOWDOWN; - AT_WRITE_REG(hw, REG_SERDES_LOCK, data); - } /* Load all of base address above */ AT_WRITE_REG(hw, REG_LOAD_PTR, 1); } @@ -1177,7 +1169,7 @@ static int atl1c_reset_mac(struct atl1c_hw *hw) { struct atl1c_adapter *adapter = (struct atl1c_adapter *)hw->adapter; struct pci_dev *pdev = adapter->pdev; - u32 master_ctrl_data = 0; + u32 ctrl_data = 0; AT_WRITE_REG(hw, REG_IMR, 0); AT_WRITE_REG(hw, REG_ISR, ISR_DIS_INT); @@ -1189,10 +1181,9 @@ static int atl1c_reset_mac(struct atl1c_hw *hw) * the current PCI configuration. The global reset bit is self- * clearing, and should clear within a microsecond. */ - AT_READ_REG(hw, REG_MASTER_CTRL, &master_ctrl_data); - master_ctrl_data |= MASTER_CTRL_OOB_DIS; - AT_WRITE_REG(hw, REG_MASTER_CTRL, - master_ctrl_data | MASTER_CTRL_SOFT_RST); + AT_READ_REG(hw, REG_MASTER_CTRL, &ctrl_data); + ctrl_data |= MASTER_CTRL_OOB_DIS; + AT_WRITE_REG(hw, REG_MASTER_CTRL, ctrl_data | MASTER_CTRL_SOFT_RST); AT_WRITE_FLUSH(hw); msleep(10); @@ -1204,7 +1195,28 @@ static int atl1c_reset_mac(struct atl1c_hw *hw) " disabled for 10ms second\n"); return -1; } - AT_WRITE_REG(hw, REG_MASTER_CTRL, master_ctrl_data); + AT_WRITE_REG(hw, REG_MASTER_CTRL, ctrl_data); + + /* driver control speed/duplex */ + AT_READ_REG(hw, REG_MAC_CTRL, &ctrl_data); + AT_WRITE_REG(hw, REG_MAC_CTRL, ctrl_data | MAC_CTRL_SPEED_MODE_SW); + + /* clk switch setting */ + AT_READ_REG(hw, REG_SERDES, &ctrl_data); + switch (hw->nic_type) { + case athr_l2c_b: + ctrl_data &= ~(SERDES_PHY_CLK_SLOWDOWN | + SERDES_MAC_CLK_SLOWDOWN); + AT_WRITE_REG(hw, REG_SERDES, ctrl_data); + break; + case athr_l2c_b2: + case athr_l1d_2: + ctrl_data |= SERDES_PHY_CLK_SLOWDOWN | SERDES_MAC_CLK_SLOWDOWN; + AT_WRITE_REG(hw, REG_SERDES, ctrl_data); + break; + default: + break; + } return 0; } |