diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3598 |
1 files changed, 3598 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c new file mode 100644 index 00000000000..580b44edb06 --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -0,0 +1,3598 @@ +/* bnx2x_cmn.c: Broadcom Everest network driver. + * + * Copyright (c) 2007-2011 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Maintained by: Eilon Greenstein <eilong@broadcom.com> + * Written by: Eliezer Tamir + * Based on code from Michael Chan's bnx2 driver + * UDP CSUM errata workaround by Arik Gendelman + * Slowpath and fastpath rework by Vladislav Zolotarov + * Statistics and Link management by Yitchak Gertner + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/etherdevice.h> +#include <linux/if_vlan.h> +#include <linux/interrupt.h> +#include <linux/ip.h> +#include <net/ipv6.h> +#include <net/ip6_checksum.h> +#include <linux/firmware.h> +#include <linux/prefetch.h> +#include "bnx2x_cmn.h" +#include "bnx2x_init.h" +#include "bnx2x_sp.h" + + + +/** + * bnx2x_bz_fp - zero content of the fastpath structure. + * + * @bp: driver handle + * @index: fastpath index to be zeroed + * + * Makes sure the contents of the bp->fp[index].napi is kept + * intact. + */ +static inline void bnx2x_bz_fp(struct bnx2x *bp, int index) +{ + struct bnx2x_fastpath *fp = &bp->fp[index]; + struct napi_struct orig_napi = fp->napi; + /* bzero bnx2x_fastpath contents */ + memset(fp, 0, sizeof(*fp)); + + /* Restore the NAPI object as it has been already initialized */ + fp->napi = orig_napi; + + fp->bp = bp; + fp->index = index; + if (IS_ETH_FP(fp)) + fp->max_cos = bp->max_cos; + else + /* Special queues support only one CoS */ + fp->max_cos = 1; + + /* + * set the tpa flag for each queue. The tpa flag determines the queue + * minimal size so it must be set prior to queue memory allocation + */ + fp->disable_tpa = ((bp->flags & TPA_ENABLE_FLAG) == 0); + +#ifdef BCM_CNIC + /* We don't want TPA on an FCoE L2 ring */ + if (IS_FCOE_FP(fp)) + fp->disable_tpa = 1; +#endif +} + +/** + * bnx2x_move_fp - move content of the fastpath structure. + * + * @bp: driver handle + * @from: source FP index + * @to: destination FP index + * + * Makes sure the contents of the bp->fp[to].napi is kept + * intact. + */ +static inline void bnx2x_move_fp(struct bnx2x *bp, int from, int to) +{ + struct bnx2x_fastpath *from_fp = &bp->fp[from]; + struct bnx2x_fastpath *to_fp = &bp->fp[to]; + struct napi_struct orig_napi = to_fp->napi; + /* Move bnx2x_fastpath contents */ + memcpy(to_fp, from_fp, sizeof(*to_fp)); + to_fp->index = to; + + /* Restore the NAPI object as it has been already initialized */ + to_fp->napi = orig_napi; +} + +int load_count[2][3] = { {0} }; /* per-path: 0-common, 1-port0, 2-port1 */ + +/* free skb in the packet ring at pos idx + * return idx of last bd freed + */ +static u16 bnx2x_free_tx_pkt(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata, + u16 idx) +{ + struct sw_tx_bd *tx_buf = &txdata->tx_buf_ring[idx]; + struct eth_tx_start_bd *tx_start_bd; + struct eth_tx_bd *tx_data_bd; + struct sk_buff *skb = tx_buf->skb; + u16 bd_idx = TX_BD(tx_buf->first_bd), new_cons; + int nbd; + + /* prefetch skb end pointer to speedup dev_kfree_skb() */ + prefetch(&skb->end); + + DP(BNX2X_MSG_FP, "fp[%d]: pkt_idx %d buff @(%p)->skb %p\n", + txdata->txq_index, idx, tx_buf, skb); + + /* unmap first bd */ + DP(BNX2X_MSG_OFF, "free bd_idx %d\n", bd_idx); + tx_start_bd = &txdata->tx_desc_ring[bd_idx].start_bd; + dma_unmap_single(&bp->pdev->dev, BD_UNMAP_ADDR(tx_start_bd), + BD_UNMAP_LEN(tx_start_bd), DMA_TO_DEVICE); + + + nbd = le16_to_cpu(tx_start_bd->nbd) - 1; +#ifdef BNX2X_STOP_ON_ERROR + if ((nbd - 1) > (MAX_SKB_FRAGS + 2)) { + BNX2X_ERR("BAD nbd!\n"); + bnx2x_panic(); + } +#endif + new_cons = nbd + tx_buf->first_bd; + + /* Get the next bd */ + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + + /* Skip a parse bd... */ + --nbd; + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + + /* ...and the TSO split header bd since they have no mapping */ + if (tx_buf->flags & BNX2X_TSO_SPLIT_BD) { + --nbd; + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + } + + /* now free frags */ + while (nbd > 0) { + + DP(BNX2X_MSG_OFF, "free frag bd_idx %d\n", bd_idx); + tx_data_bd = &txdata->tx_desc_ring[bd_idx].reg_bd; + dma_unmap_page(&bp->pdev->dev, BD_UNMAP_ADDR(tx_data_bd), + BD_UNMAP_LEN(tx_data_bd), DMA_TO_DEVICE); + if (--nbd) + bd_idx = TX_BD(NEXT_TX_IDX(bd_idx)); + } + + /* release skb */ + WARN_ON(!skb); + dev_kfree_skb_any(skb); + tx_buf->first_bd = 0; + tx_buf->skb = NULL; + + return new_cons; +} + +int bnx2x_tx_int(struct bnx2x *bp, struct bnx2x_fp_txdata *txdata) +{ + struct netdev_queue *txq; + u16 hw_cons, sw_cons, bd_cons = txdata->tx_bd_cons; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return -1; +#endif + + txq = netdev_get_tx_queue(bp->dev, txdata->txq_index); + hw_cons = le16_to_cpu(*txdata->tx_cons_sb); + sw_cons = txdata->tx_pkt_cons; + + while (sw_cons != hw_cons) { + u16 pkt_cons; + + pkt_cons = TX_BD(sw_cons); + + DP(NETIF_MSG_TX_DONE, "queue[%d]: hw_cons %u sw_cons %u " + " pkt_cons %u\n", + txdata->txq_index, hw_cons, sw_cons, pkt_cons); + + bd_cons = bnx2x_free_tx_pkt(bp, txdata, pkt_cons); + sw_cons++; + } + + txdata->tx_pkt_cons = sw_cons; + txdata->tx_bd_cons = bd_cons; + + /* Need to make the tx_bd_cons update visible to start_xmit() + * before checking for netif_tx_queue_stopped(). Without the + * memory barrier, there is a small possibility that + * start_xmit() will miss it and cause the queue to be stopped + * forever. + * On the other hand we need an rmb() here to ensure the proper + * ordering of bit testing in the following + * netif_tx_queue_stopped(txq) call. + */ + smp_mb(); + + if (unlikely(netif_tx_queue_stopped(txq))) { + /* Taking tx_lock() is needed to prevent reenabling the queue + * while it's empty. This could have happen if rx_action() gets + * suspended in bnx2x_tx_int() after the condition before + * netif_tx_wake_queue(), while tx_action (bnx2x_start_xmit()): + * + * stops the queue->sees fresh tx_bd_cons->releases the queue-> + * sends some packets consuming the whole queue again-> + * stops the queue + */ + + __netif_tx_lock(txq, smp_processor_id()); + + if ((netif_tx_queue_stopped(txq)) && + (bp->state == BNX2X_STATE_OPEN) && + (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3)) + netif_tx_wake_queue(txq); + + __netif_tx_unlock(txq); + } + return 0; +} + +static inline void bnx2x_update_last_max_sge(struct bnx2x_fastpath *fp, + u16 idx) +{ + u16 last_max = fp->last_max_sge; + + if (SUB_S16(idx, last_max) > 0) + fp->last_max_sge = idx; +} + +static void bnx2x_update_sge_prod(struct bnx2x_fastpath *fp, + struct eth_fast_path_rx_cqe *fp_cqe) +{ + struct bnx2x *bp = fp->bp; + u16 sge_len = SGE_PAGE_ALIGN(le16_to_cpu(fp_cqe->pkt_len) - + le16_to_cpu(fp_cqe->len_on_bd)) >> + SGE_PAGE_SHIFT; + u16 last_max, last_elem, first_elem; + u16 delta = 0; + u16 i; + + if (!sge_len) + return; + + /* First mark all used pages */ + for (i = 0; i < sge_len; i++) + BIT_VEC64_CLEAR_BIT(fp->sge_mask, + RX_SGE(le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[i]))); + + DP(NETIF_MSG_RX_STATUS, "fp_cqe->sgl[%d] = %d\n", + sge_len - 1, le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[sge_len - 1])); + + /* Here we assume that the last SGE index is the biggest */ + prefetch((void *)(fp->sge_mask)); + bnx2x_update_last_max_sge(fp, + le16_to_cpu(fp_cqe->sgl_or_raw_data.sgl[sge_len - 1])); + + last_max = RX_SGE(fp->last_max_sge); + last_elem = last_max >> BIT_VEC64_ELEM_SHIFT; + first_elem = RX_SGE(fp->rx_sge_prod) >> BIT_VEC64_ELEM_SHIFT; + + /* If ring is not full */ + if (last_elem + 1 != first_elem) + last_elem++; + + /* Now update the prod */ + for (i = first_elem; i != last_elem; i = NEXT_SGE_MASK_ELEM(i)) { + if (likely(fp->sge_mask[i])) + break; + + fp->sge_mask[i] = BIT_VEC64_ELEM_ONE_MASK; + delta += BIT_VEC64_ELEM_SZ; + } + + if (delta > 0) { + fp->rx_sge_prod += delta; + /* clear page-end entries */ + bnx2x_clear_sge_mask_next_elems(fp); + } + + DP(NETIF_MSG_RX_STATUS, + "fp->last_max_sge = %d fp->rx_sge_prod = %d\n", + fp->last_max_sge, fp->rx_sge_prod); +} + +static void bnx2x_tpa_start(struct bnx2x_fastpath *fp, u16 queue, + struct sk_buff *skb, u16 cons, u16 prod, + struct eth_fast_path_rx_cqe *cqe) +{ + struct bnx2x *bp = fp->bp; + struct sw_rx_bd *cons_rx_buf = &fp->rx_buf_ring[cons]; + struct sw_rx_bd *prod_rx_buf = &fp->rx_buf_ring[prod]; + struct eth_rx_bd *prod_bd = &fp->rx_desc_ring[prod]; + dma_addr_t mapping; + struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue]; + struct sw_rx_bd *first_buf = &tpa_info->first_buf; + + /* print error if current state != stop */ + if (tpa_info->tpa_state != BNX2X_TPA_STOP) + BNX2X_ERR("start of bin not in stop [%d]\n", queue); + + /* Try to map an empty skb from the aggregation info */ + mapping = dma_map_single(&bp->pdev->dev, + first_buf->skb->data, + fp->rx_buf_size, DMA_FROM_DEVICE); + /* + * ...if it fails - move the skb from the consumer to the producer + * and set the current aggregation state as ERROR to drop it + * when TPA_STOP arrives. + */ + + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + /* Move the BD from the consumer to the producer */ + bnx2x_reuse_rx_skb(fp, cons, prod); + tpa_info->tpa_state = BNX2X_TPA_ERROR; + return; + } + + /* move empty skb from pool to prod */ + prod_rx_buf->skb = first_buf->skb; + dma_unmap_addr_set(prod_rx_buf, mapping, mapping); + /* point prod_bd to new skb */ + prod_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + prod_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + + /* move partial skb from cons to pool (don't unmap yet) */ + *first_buf = *cons_rx_buf; + + /* mark bin state as START */ + tpa_info->parsing_flags = + le16_to_cpu(cqe->pars_flags.flags); + tpa_info->vlan_tag = le16_to_cpu(cqe->vlan_tag); + tpa_info->tpa_state = BNX2X_TPA_START; + tpa_info->len_on_bd = le16_to_cpu(cqe->len_on_bd); + tpa_info->placement_offset = cqe->placement_offset; + +#ifdef BNX2X_STOP_ON_ERROR + fp->tpa_queue_used |= (1 << queue); +#ifdef _ASM_GENERIC_INT_L64_H + DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%lx\n", +#else + DP(NETIF_MSG_RX_STATUS, "fp->tpa_queue_used = 0x%llx\n", +#endif + fp->tpa_queue_used); +#endif +} + +/* Timestamp option length allowed for TPA aggregation: + * + * nop nop kind length echo val + */ +#define TPA_TSTAMP_OPT_LEN 12 +/** + * bnx2x_set_lro_mss - calculate the approximate value of the MSS + * + * @bp: driver handle + * @parsing_flags: parsing flags from the START CQE + * @len_on_bd: total length of the first packet for the + * aggregation. + * + * Approximate value of the MSS for this aggregation calculated using + * the first packet of it. + */ +static inline u16 bnx2x_set_lro_mss(struct bnx2x *bp, u16 parsing_flags, + u16 len_on_bd) +{ + /* + * TPA arrgregation won't have either IP options or TCP options + * other than timestamp or IPv6 extension headers. + */ + u16 hdrs_len = ETH_HLEN + sizeof(struct tcphdr); + + if (GET_FLAG(parsing_flags, PARSING_FLAGS_OVER_ETHERNET_PROTOCOL) == + PRS_FLAG_OVERETH_IPV6) + hdrs_len += sizeof(struct ipv6hdr); + else /* IPv4 */ + hdrs_len += sizeof(struct iphdr); + + + /* Check if there was a TCP timestamp, if there is it's will + * always be 12 bytes length: nop nop kind length echo val. + * + * Otherwise FW would close the aggregation. + */ + if (parsing_flags & PARSING_FLAGS_TIME_STAMP_EXIST_FLAG) + hdrs_len += TPA_TSTAMP_OPT_LEN; + + return len_on_bd - hdrs_len; +} + +static int bnx2x_fill_frag_skb(struct bnx2x *bp, struct bnx2x_fastpath *fp, + u16 queue, struct sk_buff *skb, + struct eth_end_agg_rx_cqe *cqe, + u16 cqe_idx) +{ + struct sw_rx_page *rx_pg, old_rx_pg; + u32 i, frag_len, frag_size, pages; + int err; + int j; + struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue]; + u16 len_on_bd = tpa_info->len_on_bd; + + frag_size = le16_to_cpu(cqe->pkt_len) - len_on_bd; + pages = SGE_PAGE_ALIGN(frag_size) >> SGE_PAGE_SHIFT; + + /* This is needed in order to enable forwarding support */ + if (frag_size) + skb_shinfo(skb)->gso_size = bnx2x_set_lro_mss(bp, + tpa_info->parsing_flags, len_on_bd); + +#ifdef BNX2X_STOP_ON_ERROR + if (pages > min_t(u32, 8, MAX_SKB_FRAGS)*SGE_PAGE_SIZE*PAGES_PER_SGE) { + BNX2X_ERR("SGL length is too long: %d. CQE index is %d\n", + pages, cqe_idx); + BNX2X_ERR("cqe->pkt_len = %d\n", cqe->pkt_len); + bnx2x_panic(); + return -EINVAL; + } +#endif + + /* Run through the SGL and compose the fragmented skb */ + for (i = 0, j = 0; i < pages; i += PAGES_PER_SGE, j++) { + u16 sge_idx = RX_SGE(le16_to_cpu(cqe->sgl_or_raw_data.sgl[j])); + + /* FW gives the indices of the SGE as if the ring is an array + (meaning that "next" element will consume 2 indices) */ + frag_len = min(frag_size, (u32)(SGE_PAGE_SIZE*PAGES_PER_SGE)); + rx_pg = &fp->rx_page_ring[sge_idx]; + old_rx_pg = *rx_pg; + + /* If we fail to allocate a substitute page, we simply stop + where we are and drop the whole packet */ + err = bnx2x_alloc_rx_sge(bp, fp, sge_idx); + if (unlikely(err)) { + fp->eth_q_stats.rx_skb_alloc_failed++; + return err; + } + + /* Unmap the page as we r going to pass it to the stack */ + dma_unmap_page(&bp->pdev->dev, + dma_unmap_addr(&old_rx_pg, mapping), + SGE_PAGE_SIZE*PAGES_PER_SGE, DMA_FROM_DEVICE); + + /* Add one frag and update the appropriate fields in the skb */ + skb_fill_page_desc(skb, j, old_rx_pg.page, 0, frag_len); + + skb->data_len += frag_len; + skb->truesize += SGE_PAGE_SIZE * PAGES_PER_SGE; + skb->len += frag_len; + + frag_size -= frag_len; + } + + return 0; +} + +static void bnx2x_tpa_stop(struct bnx2x *bp, struct bnx2x_fastpath *fp, + u16 queue, struct eth_end_agg_rx_cqe *cqe, + u16 cqe_idx) +{ + struct bnx2x_agg_info *tpa_info = &fp->tpa_info[queue]; + struct sw_rx_bd *rx_buf = &tpa_info->first_buf; + u8 pad = tpa_info->placement_offset; + u16 len = tpa_info->len_on_bd; + struct sk_buff *skb = rx_buf->skb; + /* alloc new skb */ + struct sk_buff *new_skb; + u8 old_tpa_state = tpa_info->tpa_state; + + tpa_info->tpa_state = BNX2X_TPA_STOP; + + /* If we there was an error during the handling of the TPA_START - + * drop this aggregation. + */ + if (old_tpa_state == BNX2X_TPA_ERROR) + goto drop; + + /* Try to allocate the new skb */ + new_skb = netdev_alloc_skb(bp->dev, fp->rx_buf_size); + + /* Unmap skb in the pool anyway, as we are going to change + pool entry status to BNX2X_TPA_STOP even if new skb allocation + fails. */ + dma_unmap_single(&bp->pdev->dev, dma_unmap_addr(rx_buf, mapping), + fp->rx_buf_size, DMA_FROM_DEVICE); + + if (likely(new_skb)) { + prefetch(skb); + prefetch(((char *)(skb)) + L1_CACHE_BYTES); + +#ifdef BNX2X_STOP_ON_ERROR + if (pad + len > fp->rx_buf_size) { + BNX2X_ERR("skb_put is about to fail... " + "pad %d len %d rx_buf_size %d\n", + pad, len, fp->rx_buf_size); + bnx2x_panic(); + return; + } +#endif + + skb_reserve(skb, pad); + skb_put(skb, len); + + skb->protocol = eth_type_trans(skb, bp->dev); + skb->ip_summed = CHECKSUM_UNNECESSARY; + + if (!bnx2x_fill_frag_skb(bp, fp, queue, skb, cqe, cqe_idx)) { + if (tpa_info->parsing_flags & PARSING_FLAGS_VLAN) + __vlan_hwaccel_put_tag(skb, tpa_info->vlan_tag); + napi_gro_receive(&fp->napi, skb); + } else { + DP(NETIF_MSG_RX_STATUS, "Failed to allocate new pages" + " - dropping packet!\n"); + dev_kfree_skb_any(skb); + } + + + /* put new skb in bin */ + rx_buf->skb = new_skb; + + return; + } + +drop: + /* drop the packet and keep the buffer in the bin */ + DP(NETIF_MSG_RX_STATUS, + "Failed to allocate or map a new skb - dropping packet!\n"); + fp->eth_q_stats.rx_skb_alloc_failed++; +} + +/* Set Toeplitz hash value in the skb using the value from the + * CQE (calculated by HW). + */ +static inline void bnx2x_set_skb_rxhash(struct bnx2x *bp, union eth_rx_cqe *cqe, + struct sk_buff *skb) +{ + /* Set Toeplitz hash from CQE */ + if ((bp->dev->features & NETIF_F_RXHASH) && + (cqe->fast_path_cqe.status_flags & + ETH_FAST_PATH_RX_CQE_RSS_HASH_FLG)) + skb->rxhash = + le32_to_cpu(cqe->fast_path_cqe.rss_hash_result); +} + +int bnx2x_rx_int(struct bnx2x_fastpath *fp, int budget) +{ + struct bnx2x *bp = fp->bp; + u16 bd_cons, bd_prod, bd_prod_fw, comp_ring_cons; + u16 hw_comp_cons, sw_comp_cons, sw_comp_prod; + int rx_pkt = 0; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return 0; +#endif + + /* CQ "next element" is of the size of the regular element, + that's why it's ok here */ + hw_comp_cons = le16_to_cpu(*fp->rx_cons_sb); + if ((hw_comp_cons & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) + hw_comp_cons++; + + bd_cons = fp->rx_bd_cons; + bd_prod = fp->rx_bd_prod; + bd_prod_fw = bd_prod; + sw_comp_cons = fp->rx_comp_cons; + sw_comp_prod = fp->rx_comp_prod; + + /* Memory barrier necessary as speculative reads of the rx + * buffer can be ahead of the index in the status block + */ + rmb(); + + DP(NETIF_MSG_RX_STATUS, + "queue[%d]: hw_comp_cons %u sw_comp_cons %u\n", + fp->index, hw_comp_cons, sw_comp_cons); + + while (sw_comp_cons != hw_comp_cons) { + struct sw_rx_bd *rx_buf = NULL; + struct sk_buff *skb; + union eth_rx_cqe *cqe; + struct eth_fast_path_rx_cqe *cqe_fp; + u8 cqe_fp_flags; + enum eth_rx_cqe_type cqe_fp_type; + u16 len, pad; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return 0; +#endif + + comp_ring_cons = RCQ_BD(sw_comp_cons); + bd_prod = RX_BD(bd_prod); + bd_cons = RX_BD(bd_cons); + + /* Prefetch the page containing the BD descriptor + at producer's index. It will be needed when new skb is + allocated */ + prefetch((void *)(PAGE_ALIGN((unsigned long) + (&fp->rx_desc_ring[bd_prod])) - + PAGE_SIZE + 1)); + + cqe = &fp->rx_comp_ring[comp_ring_cons]; + cqe_fp = &cqe->fast_path_cqe; + cqe_fp_flags = cqe_fp->type_error_flags; + cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE; + + DP(NETIF_MSG_RX_STATUS, "CQE type %x err %x status %x" + " queue %x vlan %x len %u\n", CQE_TYPE(cqe_fp_flags), + cqe_fp_flags, cqe_fp->status_flags, + le32_to_cpu(cqe_fp->rss_hash_result), + le16_to_cpu(cqe_fp->vlan_tag), le16_to_cpu(cqe_fp->pkt_len)); + + /* is this a slowpath msg? */ + if (unlikely(CQE_TYPE_SLOW(cqe_fp_type))) { + bnx2x_sp_event(fp, cqe); + goto next_cqe; + + /* this is an rx packet */ + } else { + rx_buf = &fp->rx_buf_ring[bd_cons]; + skb = rx_buf->skb; + prefetch(skb); + + if (!CQE_TYPE_FAST(cqe_fp_type)) { +#ifdef BNX2X_STOP_ON_ERROR + /* sanity check */ + if (fp->disable_tpa && + (CQE_TYPE_START(cqe_fp_type) || + CQE_TYPE_STOP(cqe_fp_type))) + BNX2X_ERR("START/STOP packet while " + "disable_tpa type %x\n", + CQE_TYPE(cqe_fp_type)); +#endif + + if (CQE_TYPE_START(cqe_fp_type)) { + u16 queue = cqe_fp->queue_index; + DP(NETIF_MSG_RX_STATUS, + "calling tpa_start on queue %d\n", + queue); + + bnx2x_tpa_start(fp, queue, skb, + bd_cons, bd_prod, + cqe_fp); + + /* Set Toeplitz hash for LRO skb */ + bnx2x_set_skb_rxhash(bp, cqe, skb); + + goto next_rx; + + } else { + u16 queue = + cqe->end_agg_cqe.queue_index; + DP(NETIF_MSG_RX_STATUS, + "calling tpa_stop on queue %d\n", + queue); + + bnx2x_tpa_stop(bp, fp, queue, + &cqe->end_agg_cqe, + comp_ring_cons); +#ifdef BNX2X_STOP_ON_ERROR + if (bp->panic) + return 0; +#endif + + bnx2x_update_sge_prod(fp, cqe_fp); + goto next_cqe; + } + } + /* non TPA */ + len = le16_to_cpu(cqe_fp->pkt_len); + pad = cqe_fp->placement_offset; + dma_sync_single_for_cpu(&bp->pdev->dev, + dma_unmap_addr(rx_buf, mapping), + pad + RX_COPY_THRESH, + DMA_FROM_DEVICE); + prefetch(((char *)(skb)) + L1_CACHE_BYTES); + + /* is this an error packet? */ + if (unlikely(cqe_fp_flags & ETH_RX_ERROR_FALGS)) { + DP(NETIF_MSG_RX_ERR, + "ERROR flags %x rx packet %u\n", + cqe_fp_flags, sw_comp_cons); + fp->eth_q_stats.rx_err_discard_pkt++; + goto reuse_rx; + } + + /* Since we don't have a jumbo ring + * copy small packets if mtu > 1500 + */ + if ((bp->dev->mtu > ETH_MAX_PACKET_SIZE) && + (len <= RX_COPY_THRESH)) { + struct sk_buff *new_skb; + + new_skb = netdev_alloc_skb(bp->dev, len + pad); + if (new_skb == NULL) { + DP(NETIF_MSG_RX_ERR, + "ERROR packet dropped " + "because of alloc failure\n"); + fp->eth_q_stats.rx_skb_alloc_failed++; + goto reuse_rx; + } + + /* aligned copy */ + skb_copy_from_linear_data_offset(skb, pad, + new_skb->data + pad, len); + skb_reserve(new_skb, pad); + skb_put(new_skb, len); + + bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod); + + skb = new_skb; + + } else + if (likely(bnx2x_alloc_rx_skb(bp, fp, bd_prod) == 0)) { + dma_unmap_single(&bp->pdev->dev, + dma_unmap_addr(rx_buf, mapping), + fp->rx_buf_size, + DMA_FROM_DEVICE); + skb_reserve(skb, pad); + skb_put(skb, len); + + } else { + DP(NETIF_MSG_RX_ERR, + "ERROR packet dropped because " + "of alloc failure\n"); + fp->eth_q_stats.rx_skb_alloc_failed++; +reuse_rx: + bnx2x_reuse_rx_skb(fp, bd_cons, bd_prod); + goto next_rx; + } + + skb->protocol = eth_type_trans(skb, bp->dev); + + /* Set Toeplitz hash for a none-LRO skb */ + bnx2x_set_skb_rxhash(bp, cqe, skb); + + skb_checksum_none_assert(skb); + + if (bp->dev->features & NETIF_F_RXCSUM) { + + if (likely(BNX2X_RX_CSUM_OK(cqe))) + skb->ip_summed = CHECKSUM_UNNECESSARY; + else + fp->eth_q_stats.hw_csum_err++; + } + } + + skb_record_rx_queue(skb, fp->index); + + if (le16_to_cpu(cqe_fp->pars_flags.flags) & + PARSING_FLAGS_VLAN) + __vlan_hwaccel_put_tag(skb, + le16_to_cpu(cqe_fp->vlan_tag)); + napi_gro_receive(&fp->napi, skb); + + +next_rx: + rx_buf->skb = NULL; + + bd_cons = NEXT_RX_IDX(bd_cons); + bd_prod = NEXT_RX_IDX(bd_prod); + bd_prod_fw = NEXT_RX_IDX(bd_prod_fw); + rx_pkt++; +next_cqe: + sw_comp_prod = NEXT_RCQ_IDX(sw_comp_prod); + sw_comp_cons = NEXT_RCQ_IDX(sw_comp_cons); + + if (rx_pkt == budget) + break; + } /* while */ + + fp->rx_bd_cons = bd_cons; + fp->rx_bd_prod = bd_prod_fw; + fp->rx_comp_cons = sw_comp_cons; + fp->rx_comp_prod = sw_comp_prod; + + /* Update producers */ + bnx2x_update_rx_prod(bp, fp, bd_prod_fw, sw_comp_prod, + fp->rx_sge_prod); + + fp->rx_pkt += rx_pkt; + fp->rx_calls++; + + return rx_pkt; +} + +static irqreturn_t bnx2x_msix_fp_int(int irq, void *fp_cookie) +{ + struct bnx2x_fastpath *fp = fp_cookie; + struct bnx2x *bp = fp->bp; + u8 cos; + + DP(BNX2X_MSG_FP, "got an MSI-X interrupt on IDX:SB " + "[fp %d fw_sd %d igusb %d]\n", + fp->index, fp->fw_sb_id, fp->igu_sb_id); + bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, 0, IGU_INT_DISABLE, 0); + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return IRQ_HANDLED; +#endif + + /* Handle Rx and Tx according to MSI-X vector */ + prefetch(fp->rx_cons_sb); + + for_each_cos_in_tx_queue(fp, cos) + prefetch(fp->txdata[cos].tx_cons_sb); + + prefetch(&fp->sb_running_index[SM_RX_ID]); + napi_schedule(&bnx2x_fp(bp, fp->index, napi)); + + return IRQ_HANDLED; +} + +/* HW Lock for shared dual port PHYs */ +void bnx2x_acquire_phy_lock(struct bnx2x *bp) +{ + mutex_lock(&bp->port.phy_mutex); + + if (bp->port.need_hw_lock) + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_MDIO); +} + +void bnx2x_release_phy_lock(struct bnx2x *bp) +{ + if (bp->port.need_hw_lock) + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_MDIO); + + mutex_unlock(&bp->port.phy_mutex); +} + +/* calculates MF speed according to current linespeed and MF configuration */ +u16 bnx2x_get_mf_speed(struct bnx2x *bp) +{ + u16 line_speed = bp->link_vars.line_speed; + if (IS_MF(bp)) { + u16 maxCfg = bnx2x_extract_max_cfg(bp, + bp->mf_config[BP_VN(bp)]); + + /* Calculate the current MAX line speed limit for the MF + * devices + */ + if (IS_MF_SI(bp)) + line_speed = (line_speed * maxCfg) / 100; + else { /* SD mode */ + u16 vn_max_rate = maxCfg * 100; + + if (vn_max_rate < line_speed) + line_speed = vn_max_rate; + } + } + + return line_speed; +} + +/** + * bnx2x_fill_report_data - fill link report data to report + * + * @bp: driver handle + * @data: link state to update + * + * It uses a none-atomic bit operations because is called under the mutex. + */ +static inline void bnx2x_fill_report_data(struct bnx2x *bp, + struct bnx2x_link_report_data *data) +{ + u16 line_speed = bnx2x_get_mf_speed(bp); + + memset(data, 0, sizeof(*data)); + + /* Fill the report data: efective line speed */ + data->line_speed = line_speed; + + /* Link is down */ + if (!bp->link_vars.link_up || (bp->flags & MF_FUNC_DIS)) + __set_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &data->link_report_flags); + + /* Full DUPLEX */ + if (bp->link_vars.duplex == DUPLEX_FULL) + __set_bit(BNX2X_LINK_REPORT_FD, &data->link_report_flags); + + /* Rx Flow Control is ON */ + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_RX) + __set_bit(BNX2X_LINK_REPORT_RX_FC_ON, &data->link_report_flags); + + /* Tx Flow Control is ON */ + if (bp->link_vars.flow_ctrl & BNX2X_FLOW_CTRL_TX) + __set_bit(BNX2X_LINK_REPORT_TX_FC_ON, &data->link_report_flags); +} + +/** + * bnx2x_link_report - report link status to OS. + * + * @bp: driver handle + * + * Calls the __bnx2x_link_report() under the same locking scheme + * as a link/PHY state managing code to ensure a consistent link + * reporting. + */ + +void bnx2x_link_report(struct bnx2x *bp) +{ + bnx2x_acquire_phy_lock(bp); + __bnx2x_link_report(bp); + bnx2x_release_phy_lock(bp); +} + +/** + * __bnx2x_link_report - report link status to OS. + * + * @bp: driver handle + * + * None atomic inmlementation. + * Should be called under the phy_lock. + */ +void __bnx2x_link_report(struct bnx2x *bp) +{ + struct bnx2x_link_report_data cur_data; + + /* reread mf_cfg */ + if (!CHIP_IS_E1(bp)) + bnx2x_read_mf_cfg(bp); + + /* Read the current link report info */ + bnx2x_fill_report_data(bp, &cur_data); + + /* Don't report link down or exactly the same link status twice */ + if (!memcmp(&cur_data, &bp->last_reported_link, sizeof(cur_data)) || + (test_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &bp->last_reported_link.link_report_flags) && + test_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &cur_data.link_report_flags))) + return; + + bp->link_cnt++; + + /* We are going to report a new link parameters now - + * remember the current data for the next time. + */ + memcpy(&bp->last_reported_link, &cur_data, sizeof(cur_data)); + + if (test_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &cur_data.link_report_flags)) { + netif_carrier_off(bp->dev); + netdev_err(bp->dev, "NIC Link is Down\n"); + return; + } else { + const char *duplex; + const char *flow; + + netif_carrier_on(bp->dev); + + if (test_and_clear_bit(BNX2X_LINK_REPORT_FD, + &cur_data.link_report_flags)) + duplex = "full"; + else + duplex = "half"; + + /* Handle the FC at the end so that only these flags would be + * possibly set. This way we may easily check if there is no FC + * enabled. + */ + if (cur_data.link_report_flags) { + if (test_bit(BNX2X_LINK_REPORT_RX_FC_ON, + &cur_data.link_report_flags)) { + if (test_bit(BNX2X_LINK_REPORT_TX_FC_ON, + &cur_data.link_report_flags)) + flow = "ON - receive & transmit"; + else + flow = "ON - receive"; + } else { + flow = "ON - transmit"; + } + } else { + flow = "none"; + } + netdev_info(bp->dev, "NIC Link is Up, %d Mbps %s duplex, Flow control: %s\n", + cur_data.line_speed, duplex, flow); + } +} + +void bnx2x_init_rx_rings(struct bnx2x *bp) +{ + int func = BP_FUNC(bp); + u16 ring_prod; + int i, j; + + /* Allocate TPA resources */ + for_each_rx_queue(bp, j) { + struct bnx2x_fastpath *fp = &bp->fp[j]; + + DP(NETIF_MSG_IFUP, + "mtu %d rx_buf_size %d\n", bp->dev->mtu, fp->rx_buf_size); + + if (!fp->disable_tpa) { + /* Fill the per-aggregtion pool */ + for (i = 0; i < MAX_AGG_QS(bp); i++) { + struct bnx2x_agg_info *tpa_info = + &fp->tpa_info[i]; + struct sw_rx_bd *first_buf = + &tpa_info->first_buf; + + first_buf->skb = netdev_alloc_skb(bp->dev, + fp->rx_buf_size); + if (!first_buf->skb) { + BNX2X_ERR("Failed to allocate TPA " + "skb pool for queue[%d] - " + "disabling TPA on this " + "queue!\n", j); + bnx2x_free_tpa_pool(bp, fp, i); + fp->disable_tpa = 1; + break; + } + dma_unmap_addr_set(first_buf, mapping, 0); + tpa_info->tpa_state = BNX2X_TPA_STOP; + } + + /* "next page" elements initialization */ + bnx2x_set_next_page_sgl(fp); + + /* set SGEs bit mask */ + bnx2x_init_sge_ring_bit_mask(fp); + + /* Allocate SGEs and initialize the ring elements */ + for (i = 0, ring_prod = 0; + i < MAX_RX_SGE_CNT*NUM_RX_SGE_PAGES; i++) { + + if (bnx2x_alloc_rx_sge(bp, fp, ring_prod) < 0) { + BNX2X_ERR("was only able to allocate " + "%d rx sges\n", i); + BNX2X_ERR("disabling TPA for " + "queue[%d]\n", j); + /* Cleanup already allocated elements */ + bnx2x_free_rx_sge_range(bp, fp, + ring_prod); + bnx2x_free_tpa_pool(bp, fp, + MAX_AGG_QS(bp)); + fp->disable_tpa = 1; + ring_prod = 0; + break; + } + ring_prod = NEXT_SGE_IDX(ring_prod); + } + + fp->rx_sge_prod = ring_prod; + } + } + + for_each_rx_queue(bp, j) { + struct bnx2x_fastpath *fp = &bp->fp[j]; + + fp->rx_bd_cons = 0; + + /* Activate BD ring */ + /* Warning! + * this will generate an interrupt (to the TSTORM) + * must only be done after chip is initialized + */ + bnx2x_update_rx_prod(bp, fp, fp->rx_bd_prod, fp->rx_comp_prod, + fp->rx_sge_prod); + + if (j != 0) + continue; + + if (CHIP_IS_E1(bp)) { + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func), + U64_LO(fp->rx_comp_mapping)); + REG_WR(bp, BAR_USTRORM_INTMEM + + USTORM_MEM_WORKAROUND_ADDRESS_OFFSET(func) + 4, + U64_HI(fp->rx_comp_mapping)); + } + } +} + +static void bnx2x_free_tx_skbs(struct bnx2x *bp) +{ + int i; + u8 cos; + + for_each_tx_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = &fp->txdata[cos]; + + u16 bd_cons = txdata->tx_bd_cons; + u16 sw_prod = txdata->tx_pkt_prod; + u16 sw_cons = txdata->tx_pkt_cons; + + while (sw_cons != sw_prod) { + bd_cons = bnx2x_free_tx_pkt(bp, txdata, + TX_BD(sw_cons)); + sw_cons++; + } + } + } +} + +static void bnx2x_free_rx_bds(struct bnx2x_fastpath *fp) +{ + struct bnx2x *bp = fp->bp; + int i; + + /* ring wasn't allocated */ + if (fp->rx_buf_ring == NULL) + return; + + for (i = 0; i < NUM_RX_BD; i++) { + struct sw_rx_bd *rx_buf = &fp->rx_buf_ring[i]; + struct sk_buff *skb = rx_buf->skb; + + if (skb == NULL) + continue; + dma_unmap_single(&bp->pdev->dev, + dma_unmap_addr(rx_buf, mapping), + fp->rx_buf_size, DMA_FROM_DEVICE); + + rx_buf->skb = NULL; + dev_kfree_skb(skb); + } +} + +static void bnx2x_free_rx_skbs(struct bnx2x *bp) +{ + int j; + + for_each_rx_queue(bp, j) { + struct bnx2x_fastpath *fp = &bp->fp[j]; + + bnx2x_free_rx_bds(fp); + + if (!fp->disable_tpa) + bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp)); + } +} + +void bnx2x_free_skbs(struct bnx2x *bp) +{ + bnx2x_free_tx_skbs(bp); + bnx2x_free_rx_skbs(bp); +} + +void bnx2x_update_max_mf_config(struct bnx2x *bp, u32 value) +{ + /* load old values */ + u32 mf_cfg = bp->mf_config[BP_VN(bp)]; + + if (value != bnx2x_extract_max_cfg(bp, mf_cfg)) { + /* leave all but MAX value */ + mf_cfg &= ~FUNC_MF_CFG_MAX_BW_MASK; + + /* set new MAX value */ + mf_cfg |= (value << FUNC_MF_CFG_MAX_BW_SHIFT) + & FUNC_MF_CFG_MAX_BW_MASK; + + bnx2x_fw_command(bp, DRV_MSG_CODE_SET_MF_BW, mf_cfg); + } +} + +/** + * bnx2x_free_msix_irqs - free previously requested MSI-X IRQ vectors + * + * @bp: driver handle + * @nvecs: number of vectors to be released + */ +static void bnx2x_free_msix_irqs(struct bnx2x *bp, int nvecs) +{ + int i, offset = 0; + + if (nvecs == offset) + return; + free_irq(bp->msix_table[offset].vector, bp->dev); + DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n", + bp->msix_table[offset].vector); + offset++; +#ifdef BCM_CNIC + if (nvecs == offset) + return; + offset++; +#endif + + for_each_eth_queue(bp, i) { + if (nvecs == offset) + return; + DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d " + "irq\n", i, bp->msix_table[offset].vector); + + free_irq(bp->msix_table[offset++].vector, &bp->fp[i]); + } +} + +void bnx2x_free_irq(struct bnx2x *bp) +{ + if (bp->flags & USING_MSIX_FLAG) + bnx2x_free_msix_irqs(bp, BNX2X_NUM_ETH_QUEUES(bp) + + CNIC_PRESENT + 1); + else if (bp->flags & USING_MSI_FLAG) + free_irq(bp->pdev->irq, bp->dev); + else + free_irq(bp->pdev->irq, bp->dev); +} + +int bnx2x_enable_msix(struct bnx2x *bp) +{ + int msix_vec = 0, i, rc, req_cnt; + + bp->msix_table[msix_vec].entry = msix_vec; + DP(NETIF_MSG_IFUP, "msix_table[0].entry = %d (slowpath)\n", + bp->msix_table[0].entry); + msix_vec++; + +#ifdef BCM_CNIC + bp->msix_table[msix_vec].entry = msix_vec; + DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d (CNIC)\n", + bp->msix_table[msix_vec].entry, bp->msix_table[msix_vec].entry); + msix_vec++; +#endif + /* We need separate vectors for ETH queues only (not FCoE) */ + for_each_eth_queue(bp, i) { + bp->msix_table[msix_vec].entry = msix_vec; + DP(NETIF_MSG_IFUP, "msix_table[%d].entry = %d " + "(fastpath #%u)\n", msix_vec, msix_vec, i); + msix_vec++; + } + + req_cnt = BNX2X_NUM_ETH_QUEUES(bp) + CNIC_PRESENT + 1; + + rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], req_cnt); + + /* + * reconfigure number of tx/rx queues according to available + * MSI-X vectors + */ + if (rc >= BNX2X_MIN_MSIX_VEC_CNT) { + /* how less vectors we will have? */ + int diff = req_cnt - rc; + + DP(NETIF_MSG_IFUP, + "Trying to use less MSI-X vectors: %d\n", rc); + + rc = pci_enable_msix(bp->pdev, &bp->msix_table[0], rc); + + if (rc) { + DP(NETIF_MSG_IFUP, + "MSI-X is not attainable rc %d\n", rc); + return rc; + } + /* + * decrease number of queues by number of unallocated entries + */ + bp->num_queues -= diff; + + DP(NETIF_MSG_IFUP, "New queue configuration set: %d\n", + bp->num_queues); + } else if (rc) { + /* fall to INTx if not enough memory */ + if (rc == -ENOMEM) + bp->flags |= DISABLE_MSI_FLAG; + DP(NETIF_MSG_IFUP, "MSI-X is not attainable rc %d\n", rc); + return rc; + } + + bp->flags |= USING_MSIX_FLAG; + + return 0; +} + +static int bnx2x_req_msix_irqs(struct bnx2x *bp) +{ + int i, rc, offset = 0; + + rc = request_irq(bp->msix_table[offset++].vector, + bnx2x_msix_sp_int, 0, + bp->dev->name, bp->dev); + if (rc) { + BNX2X_ERR("request sp irq failed\n"); + return -EBUSY; + } + +#ifdef BCM_CNIC + offset++; +#endif + for_each_eth_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + snprintf(fp->name, sizeof(fp->name), "%s-fp-%d", + bp->dev->name, i); + + rc = request_irq(bp->msix_table[offset].vector, + bnx2x_msix_fp_int, 0, fp->name, fp); + if (rc) { + BNX2X_ERR("request fp #%d irq (%d) failed rc %d\n", i, + bp->msix_table[offset].vector, rc); + bnx2x_free_msix_irqs(bp, offset); + return -EBUSY; + } + + offset++; + } + + i = BNX2X_NUM_ETH_QUEUES(bp); + offset = 1 + CNIC_PRESENT; + netdev_info(bp->dev, "using MSI-X IRQs: sp %d fp[%d] %d" + " ... fp[%d] %d\n", + bp->msix_table[0].vector, + 0, bp->msix_table[offset].vector, + i - 1, bp->msix_table[offset + i - 1].vector); + + return 0; +} + +int bnx2x_enable_msi(struct bnx2x *bp) +{ + int rc; + + rc = pci_enable_msi(bp->pdev); + if (rc) { + DP(NETIF_MSG_IFUP, "MSI is not attainable\n"); + return -1; + } + bp->flags |= USING_MSI_FLAG; + + return 0; +} + +static int bnx2x_req_irq(struct bnx2x *bp) +{ + unsigned long flags; + int rc; + + if (bp->flags & USING_MSI_FLAG) + flags = 0; + else + flags = IRQF_SHARED; + + rc = request_irq(bp->pdev->irq, bnx2x_interrupt, flags, + bp->dev->name, bp->dev); + return rc; +} + +static inline int bnx2x_setup_irqs(struct bnx2x *bp) +{ + int rc = 0; + if (bp->flags & USING_MSIX_FLAG) { + rc = bnx2x_req_msix_irqs(bp); + if (rc) + return rc; + } else { + bnx2x_ack_int(bp); + rc = bnx2x_req_irq(bp); + if (rc) { + BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc); + return rc; + } + if (bp->flags & USING_MSI_FLAG) { + bp->dev->irq = bp->pdev->irq; + netdev_info(bp->dev, "using MSI IRQ %d\n", + bp->pdev->irq); + } + } + + return 0; +} + +static inline void bnx2x_napi_enable(struct bnx2x *bp) +{ + int i; + + for_each_rx_queue(bp, i) + napi_enable(&bnx2x_fp(bp, i, napi)); +} + +static inline void bnx2x_napi_disable(struct bnx2x *bp) +{ + int i; + + for_each_rx_queue(bp, i) + napi_disable(&bnx2x_fp(bp, i, napi)); +} + +void bnx2x_netif_start(struct bnx2x *bp) +{ + if (netif_running(bp->dev)) { + bnx2x_napi_enable(bp); + bnx2x_int_enable(bp); + if (bp->state == BNX2X_STATE_OPEN) + netif_tx_wake_all_queues(bp->dev); + } +} + +void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) +{ + bnx2x_int_disable_sync(bp, disable_hw); + bnx2x_napi_disable(bp); +} + +u16 bnx2x_select_queue(struct net_device *dev, struct sk_buff *skb) +{ + struct bnx2x *bp = netdev_priv(dev); + +#ifdef BCM_CNIC + if (!NO_FCOE(bp)) { + struct ethhdr *hdr = (struct ethhdr *)skb->data; + u16 ether_type = ntohs(hdr->h_proto); + + /* Skip VLAN tag if present */ + if (ether_type == ETH_P_8021Q) { + struct vlan_ethhdr *vhdr = + (struct vlan_ethhdr *)skb->data; + + ether_type = ntohs(vhdr->h_vlan_encapsulated_proto); + } + + /* If ethertype is FCoE or FIP - use FCoE ring */ + if ((ether_type == ETH_P_FCOE) || (ether_type == ETH_P_FIP)) + return bnx2x_fcoe_tx(bp, txq_index); + } +#endif + /* select a non-FCoE queue */ + return __skb_tx_hash(dev, skb, BNX2X_NUM_ETH_QUEUES(bp)); +} + +void bnx2x_set_num_queues(struct bnx2x *bp) +{ + switch (bp->multi_mode) { + case ETH_RSS_MODE_DISABLED: + bp->num_queues = 1; + break; + case ETH_RSS_MODE_REGULAR: + bp->num_queues = bnx2x_calc_num_queues(bp); + break; + + default: + bp->num_queues = 1; + break; + } + + /* Add special queues */ + bp->num_queues += NON_ETH_CONTEXT_USE; +} + +/** + * bnx2x_set_real_num_queues - configure netdev->real_num_[tx,rx]_queues + * + * @bp: Driver handle + * + * We currently support for at most 16 Tx queues for each CoS thus we will + * allocate a multiple of 16 for ETH L2 rings according to the value of the + * bp->max_cos. + * + * If there is an FCoE L2 queue the appropriate Tx queue will have the next + * index after all ETH L2 indices. + * + * If the actual number of Tx queues (for each CoS) is less than 16 then there + * will be the holes at the end of each group of 16 ETh L2 indices (0..15, + * 16..31,...) with indicies that are not coupled with any real Tx queue. + * + * The proper configuration of skb->queue_mapping is handled by + * bnx2x_select_queue() and __skb_tx_hash(). + * + * bnx2x_setup_tc() takes care of the proper TC mappings so that __skb_tx_hash() + * will return a proper Tx index if TC is enabled (netdev->num_tc > 0). + */ +static inline int bnx2x_set_real_num_queues(struct bnx2x *bp) +{ + int rc, tx, rx; + + tx = MAX_TXQS_PER_COS * bp->max_cos; + rx = BNX2X_NUM_ETH_QUEUES(bp); + +/* account for fcoe queue */ +#ifdef BCM_CNIC + if (!NO_FCOE(bp)) { + rx += FCOE_PRESENT; + tx += FCOE_PRESENT; + } +#endif + + rc = netif_set_real_num_tx_queues(bp->dev, tx); + if (rc) { + BNX2X_ERR("Failed to set real number of Tx queues: %d\n", rc); + return rc; + } + rc = netif_set_real_num_rx_queues(bp->dev, rx); + if (rc) { + BNX2X_ERR("Failed to set real number of Rx queues: %d\n", rc); + return rc; + } + + DP(NETIF_MSG_DRV, "Setting real num queues to (tx, rx) (%d, %d)\n", + tx, rx); + + return rc; +} + +static inline void bnx2x_set_rx_buf_size(struct bnx2x *bp) +{ + int i; + + for_each_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + /* Always use a mini-jumbo MTU for the FCoE L2 ring */ + if (IS_FCOE_IDX(i)) + /* + * Although there are no IP frames expected to arrive to + * this ring we still want to add an + * IP_HEADER_ALIGNMENT_PADDING to prevent a buffer + * overrun attack. + */ + fp->rx_buf_size = + BNX2X_FCOE_MINI_JUMBO_MTU + ETH_OVREHEAD + + BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING; + else + fp->rx_buf_size = + bp->dev->mtu + ETH_OVREHEAD + + BNX2X_FW_RX_ALIGN + IP_HEADER_ALIGNMENT_PADDING; + } +} + +static inline int bnx2x_init_rss_pf(struct bnx2x *bp) +{ + int i; + u8 ind_table[T_ETH_INDIRECTION_TABLE_SIZE] = {0}; + u8 num_eth_queues = BNX2X_NUM_ETH_QUEUES(bp); + + /* + * Prepare the inital contents fo the indirection table if RSS is + * enabled + */ + if (bp->multi_mode != ETH_RSS_MODE_DISABLED) { + for (i = 0; i < sizeof(ind_table); i++) + ind_table[i] = + bp->fp->cl_id + (i % num_eth_queues); + } + + /* + * For 57710 and 57711 SEARCHER configuration (rss_keys) is + * per-port, so if explicit configuration is needed , do it only + * for a PMF. + * + * For 57712 and newer on the other hand it's a per-function + * configuration. + */ + return bnx2x_config_rss_pf(bp, ind_table, + bp->port.pmf || !CHIP_IS_E1x(bp)); +} + +int bnx2x_config_rss_pf(struct bnx2x *bp, u8 *ind_table, bool config_hash) +{ + struct bnx2x_config_rss_params params = {0}; + int i; + + /* Although RSS is meaningless when there is a single HW queue we + * still need it enabled in order to have HW Rx hash generated. + * + * if (!is_eth_multi(bp)) + * bp->multi_mode = ETH_RSS_MODE_DISABLED; + */ + + params.rss_obj = &bp->rss_conf_obj; + + __set_bit(RAMROD_COMP_WAIT, ¶ms.ramrod_flags); + + /* RSS mode */ + switch (bp->multi_mode) { + case ETH_RSS_MODE_DISABLED: + __set_bit(BNX2X_RSS_MODE_DISABLED, ¶ms.rss_flags); + break; + case ETH_RSS_MODE_REGULAR: + __set_bit(BNX2X_RSS_MODE_REGULAR, ¶ms.rss_flags); + break; + case ETH_RSS_MODE_VLAN_PRI: + __set_bit(BNX2X_RSS_MODE_VLAN_PRI, ¶ms.rss_flags); + break; + case ETH_RSS_MODE_E1HOV_PRI: + __set_bit(BNX2X_RSS_MODE_E1HOV_PRI, ¶ms.rss_flags); + break; + case ETH_RSS_MODE_IP_DSCP: + __set_bit(BNX2X_RSS_MODE_IP_DSCP, ¶ms.rss_flags); + break; + default: + BNX2X_ERR("Unknown multi_mode: %d\n", bp->multi_mode); + return -EINVAL; + } + + /* If RSS is enabled */ + if (bp->multi_mode != ETH_RSS_MODE_DISABLED) { + /* RSS configuration */ + __set_bit(BNX2X_RSS_IPV4, ¶ms.rss_flags); + __set_bit(BNX2X_RSS_IPV4_TCP, ¶ms.rss_flags); + __set_bit(BNX2X_RSS_IPV6, ¶ms.rss_flags); + __set_bit(BNX2X_RSS_IPV6_TCP, ¶ms.rss_flags); + + /* Hash bits */ + params.rss_result_mask = MULTI_MASK; + + memcpy(params.ind_table, ind_table, sizeof(params.ind_table)); + + if (config_hash) { + /* RSS keys */ + for (i = 0; i < sizeof(params.rss_key) / 4; i++) + params.rss_key[i] = random32(); + + __set_bit(BNX2X_RSS_SET_SRCH, ¶ms.rss_flags); + } + } + + return bnx2x_config_rss(bp, ¶ms); +} + +static inline int bnx2x_init_hw(struct bnx2x *bp, u32 load_code) +{ + struct bnx2x_func_state_params func_params = {0}; + + /* Prepare parameters for function state transitions */ + __set_bit(RAMROD_COMP_WAIT, &func_params.ramrod_flags); + + func_params.f_obj = &bp->func_obj; + func_params.cmd = BNX2X_F_CMD_HW_INIT; + + func_params.params.hw_init.load_phase = load_code; + + return bnx2x_func_state_change(bp, &func_params); +} + +/* + * Cleans the object that have internal lists without sending + * ramrods. Should be run when interrutps are disabled. + */ +static void bnx2x_squeeze_objects(struct bnx2x *bp) +{ + int rc; + unsigned long ramrod_flags = 0, vlan_mac_flags = 0; + struct bnx2x_mcast_ramrod_params rparam = {0}; + struct bnx2x_vlan_mac_obj *mac_obj = &bp->fp->mac_obj; + + /***************** Cleanup MACs' object first *************************/ + + /* Wait for completion of requested */ + __set_bit(RAMROD_COMP_WAIT, &ramrod_flags); + /* Perform a dry cleanup */ + __set_bit(RAMROD_DRV_CLR_ONLY, &ramrod_flags); + + /* Clean ETH primary MAC */ + __set_bit(BNX2X_ETH_MAC, &vlan_mac_flags); + rc = mac_obj->delete_all(bp, &bp->fp->mac_obj, &vlan_mac_flags, + &ramrod_flags); + if (rc != 0) + BNX2X_ERR("Failed to clean ETH MACs: %d\n", rc); + + /* Cleanup UC list */ + vlan_mac_flags = 0; + __set_bit(BNX2X_UC_LIST_MAC, &vlan_mac_flags); + rc = mac_obj->delete_all(bp, mac_obj, &vlan_mac_flags, + &ramrod_flags); + if (rc != 0) + BNX2X_ERR("Failed to clean UC list MACs: %d\n", rc); + + /***************** Now clean mcast object *****************************/ + rparam.mcast_obj = &bp->mcast_obj; + __set_bit(RAMROD_DRV_CLR_ONLY, &rparam.ramrod_flags); + + /* Add a DEL command... */ + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_DEL); + if (rc < 0) + BNX2X_ERR("Failed to add a new DEL command to a multi-cast " + "object: %d\n", rc); + + /* ...and wait until all pending commands are cleared */ + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + while (rc != 0) { + if (rc < 0) { + BNX2X_ERR("Failed to clean multi-cast object: %d\n", + rc); + return; + } + + rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_CONT); + } +} + +#ifndef BNX2X_STOP_ON_ERROR +#define LOAD_ERROR_EXIT(bp, label) \ + do { \ + (bp)->state = BNX2X_STATE_ERROR; \ + goto label; \ + } while (0) +#else +#define LOAD_ERROR_EXIT(bp, label) \ + do { \ + (bp)->state = BNX2X_STATE_ERROR; \ + (bp)->panic = 1; \ + return -EBUSY; \ + } while (0) +#endif + +/* must be called with rtnl_lock */ +int bnx2x_nic_load(struct bnx2x *bp, int load_mode) +{ + int port = BP_PORT(bp); + u32 load_code; + int i, rc; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return -EPERM; +#endif + + bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; + + /* Set the initial link reported state to link down */ + bnx2x_acquire_phy_lock(bp); + memset(&bp->last_reported_link, 0, sizeof(bp->last_reported_link)); + __set_bit(BNX2X_LINK_REPORT_LINK_DOWN, + &bp->last_reported_link.link_report_flags); + bnx2x_release_phy_lock(bp); + + /* must be called before memory allocation and HW init */ + bnx2x_ilt_set_info(bp); + + /* + * Zero fastpath structures preserving invariants like napi, which are + * allocated only once, fp index, max_cos, bp pointer. + * Also set fp->disable_tpa. + */ + for_each_queue(bp, i) + bnx2x_bz_fp(bp, i); + + + /* Set the receive queues buffer size */ + bnx2x_set_rx_buf_size(bp); + + if (bnx2x_alloc_mem(bp)) + return -ENOMEM; + + /* As long as bnx2x_alloc_mem() may possibly update + * bp->num_queues, bnx2x_set_real_num_queues() should always + * come after it. + */ + rc = bnx2x_set_real_num_queues(bp); + if (rc) { + BNX2X_ERR("Unable to set real_num_queues\n"); + LOAD_ERROR_EXIT(bp, load_error0); + } + + /* configure multi cos mappings in kernel. + * this configuration may be overriden by a multi class queue discipline + * or by a dcbx negotiation result. + */ + bnx2x_setup_tc(bp->dev, bp->max_cos); + + bnx2x_napi_enable(bp); + + /* Send LOAD_REQUEST command to MCP + * Returns the type of LOAD command: + * if it is the first port to be initialized + * common blocks should be initialized, otherwise - not + */ + if (!BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 0); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + LOAD_ERROR_EXIT(bp, load_error1); + } + if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) { + rc = -EBUSY; /* other port in diagnostic mode */ + LOAD_ERROR_EXIT(bp, load_error1); + } + + } else { + int path = BP_PATH(bp); + + DP(NETIF_MSG_IFUP, "NO MCP - load counts[%d] %d, %d, %d\n", + path, load_count[path][0], load_count[path][1], + load_count[path][2]); + load_count[path][0]++; + load_count[path][1 + port]++; + DP(NETIF_MSG_IFUP, "NO MCP - new load counts[%d] %d, %d, %d\n", + path, load_count[path][0], load_count[path][1], + load_count[path][2]); + if (load_count[path][0] == 1) + load_code = FW_MSG_CODE_DRV_LOAD_COMMON; + else if (load_count[path][1 + port] == 1) + load_code = FW_MSG_CODE_DRV_LOAD_PORT; + else + load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; + } + + if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) || + (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) { + bp->port.pmf = 1; + /* + * We need the barrier to ensure the ordering between the + * writing to bp->port.pmf here and reading it from the + * bnx2x_periodic_task(). + */ + smp_mb(); + queue_delayed_work(bnx2x_wq, &bp->period_task, 0); + } else + bp->port.pmf = 0; + + DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); + + /* Init Function state controlling object */ + bnx2x__init_func_obj(bp); + + /* Initialize HW */ + rc = bnx2x_init_hw(bp, load_code); + if (rc) { + BNX2X_ERR("HW init failed, aborting\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + LOAD_ERROR_EXIT(bp, load_error2); + } + + /* Connect to IRQs */ + rc = bnx2x_setup_irqs(bp); + if (rc) { + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + LOAD_ERROR_EXIT(bp, load_error2); + } + + /* Setup NIC internals and enable interrupts */ + bnx2x_nic_init(bp, load_code); + + /* Init per-function objects */ + bnx2x_init_bp_objs(bp); + + if (((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_COMMON_CHIP)) && + (bp->common.shmem2_base)) { + if (SHMEM2_HAS(bp, dcc_support)) + SHMEM2_WR(bp, dcc_support, + (SHMEM_DCC_SUPPORT_DISABLE_ENABLE_PF_TLV | + SHMEM_DCC_SUPPORT_BANDWIDTH_ALLOCATION_TLV)); + } + + bp->state = BNX2X_STATE_OPENING_WAIT4_PORT; + rc = bnx2x_func_start(bp); + if (rc) { + BNX2X_ERR("Function start failed!\n"); + bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + LOAD_ERROR_EXIT(bp, load_error3); + } + + /* Send LOAD_DONE command to MCP */ + if (!BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + LOAD_ERROR_EXIT(bp, load_error3); + } + } + + rc = bnx2x_setup_leading(bp); + if (rc) { + BNX2X_ERR("Setup leading failed!\n"); + LOAD_ERROR_EXIT(bp, load_error3); + } + +#ifdef BCM_CNIC + /* Enable Timer scan */ + REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 1); +#endif + + for_each_nondefault_queue(bp, i) { + rc = bnx2x_setup_queue(bp, &bp->fp[i], 0); + if (rc) + LOAD_ERROR_EXIT(bp, load_error4); + } + + rc = bnx2x_init_rss_pf(bp); + if (rc) + LOAD_ERROR_EXIT(bp, load_error4); + + /* Now when Clients are configured we are ready to work */ + bp->state = BNX2X_STATE_OPEN; + + /* Configure a ucast MAC */ + rc = bnx2x_set_eth_mac(bp, true); + if (rc) + LOAD_ERROR_EXIT(bp, load_error4); + + if (bp->pending_max) { + bnx2x_update_max_mf_config(bp, bp->pending_max); + bp->pending_max = 0; + } + + if (bp->port.pmf) + bnx2x_initial_phy_init(bp, load_mode); + + /* Start fast path */ + + /* Initialize Rx filter. */ + netif_addr_lock_bh(bp->dev); + bnx2x_set_rx_mode(bp->dev); + netif_addr_unlock_bh(bp->dev); + + /* Start the Tx */ + switch (load_mode) { + case LOAD_NORMAL: + /* Tx queue should be only reenabled */ + netif_tx_wake_all_queues(bp->dev); + break; + + case LOAD_OPEN: + netif_tx_start_all_queues(bp->dev); + smp_mb__after_clear_bit(); + break; + + case LOAD_DIAG: + bp->state = BNX2X_STATE_DIAG; + break; + + default: + break; + } + + if (!bp->port.pmf) + bnx2x__link_status_update(bp); + + /* start the timer */ + mod_timer(&bp->timer, jiffies + bp->current_interval); + +#ifdef BCM_CNIC + bnx2x_setup_cnic_irq_info(bp); + if (bp->state == BNX2X_STATE_OPEN) + bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD); +#endif + bnx2x_inc_load_cnt(bp); + + /* Wait for all pending SP commands to complete */ + if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) { + BNX2X_ERR("Timeout waiting for SP elements to complete\n"); + bnx2x_nic_unload(bp, UNLOAD_CLOSE); + return -EBUSY; + } + + bnx2x_dcbx_init(bp); + return 0; + +#ifndef BNX2X_STOP_ON_ERROR +load_error4: +#ifdef BCM_CNIC + /* Disable Timer scan */ + REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0); +#endif +load_error3: + bnx2x_int_disable_sync(bp, 1); + + /* Clean queueable objects */ + bnx2x_squeeze_objects(bp); + + /* Free SKBs, SGEs, TPA pool and driver internals */ + bnx2x_free_skbs(bp); + for_each_rx_queue(bp, i) + bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + + /* Release IRQs */ + bnx2x_free_irq(bp); +load_error2: + if (!BP_NOMCP(bp)) { + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0); + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); + } + + bp->port.pmf = 0; +load_error1: + bnx2x_napi_disable(bp); +load_error0: + bnx2x_free_mem(bp); + + return rc; +#endif /* ! BNX2X_STOP_ON_ERROR */ +} + +/* must be called with rtnl_lock */ +int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) +{ + int i; + bool global = false; + + if ((bp->state == BNX2X_STATE_CLOSED) || + (bp->state == BNX2X_STATE_ERROR)) { + /* We can get here if the driver has been unloaded + * during parity error recovery and is either waiting for a + * leader to complete or for other functions to unload and + * then ifdown has been issued. In this case we want to + * unload and let other functions to complete a recovery + * process. + */ + bp->recovery_state = BNX2X_RECOVERY_DONE; + bp->is_leader = 0; + bnx2x_release_leader_lock(bp); + smp_mb(); + + DP(NETIF_MSG_HW, "Releasing a leadership...\n"); + + return -EINVAL; + } + + /* + * It's important to set the bp->state to the value different from + * BNX2X_STATE_OPEN and only then stop the Tx. Otherwise bnx2x_tx_int() + * may restart the Tx from the NAPI context (see bnx2x_tx_int()). + */ + bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT; + smp_mb(); + + /* Stop Tx */ + bnx2x_tx_disable(bp); + +#ifdef BCM_CNIC + bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD); +#endif + + bp->rx_mode = BNX2X_RX_MODE_NONE; + + del_timer_sync(&bp->timer); + + /* Set ALWAYS_ALIVE bit in shmem */ + bp->fw_drv_pulse_wr_seq |= DRV_PULSE_ALWAYS_ALIVE; + + bnx2x_drv_pulse(bp); + + bnx2x_stats_handle(bp, STATS_EVENT_STOP); + + /* Cleanup the chip if needed */ + if (unload_mode != UNLOAD_RECOVERY) + bnx2x_chip_cleanup(bp, unload_mode); + else { + /* Send the UNLOAD_REQUEST to the MCP */ + bnx2x_send_unload_req(bp, unload_mode); + + /* + * Prevent transactions to host from the functions on the + * engine that doesn't reset global blocks in case of global + * attention once gloabl blocks are reset and gates are opened + * (the engine which leader will perform the recovery + * last). + */ + if (!CHIP_IS_E1x(bp)) + bnx2x_pf_disable(bp); + + /* Disable HW interrupts, NAPI */ + bnx2x_netif_stop(bp, 1); + + /* Release IRQs */ + bnx2x_free_irq(bp); + + /* Report UNLOAD_DONE to MCP */ + bnx2x_send_unload_done(bp); + } + + /* + * At this stage no more interrupts will arrive so we may safly clean + * the queueable objects here in case they failed to get cleaned so far. + */ + bnx2x_squeeze_objects(bp); + + /* There should be no more pending SP commands at this stage */ + bp->sp_state = 0; + + bp->port.pmf = 0; + + /* Free SKBs, SGEs, TPA pool and driver internals */ + bnx2x_free_skbs(bp); + for_each_rx_queue(bp, i) + bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + + bnx2x_free_mem(bp); + + bp->state = BNX2X_STATE_CLOSED; + + /* Check if there are pending parity attentions. If there are - set + * RECOVERY_IN_PROGRESS. + */ + if (bnx2x_chk_parity_attn(bp, &global, false)) { + bnx2x_set_reset_in_progress(bp); + + /* Set RESET_IS_GLOBAL if needed */ + if (global) + bnx2x_set_reset_global(bp); + } + + + /* The last driver must disable a "close the gate" if there is no + * parity attention or "process kill" pending. + */ + if (!bnx2x_dec_load_cnt(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp))) + bnx2x_disable_close_the_gate(bp); + + return 0; +} + +int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) +{ + u16 pmcsr; + + /* If there is no power capability, silently succeed */ + if (!bp->pm_cap) { + DP(NETIF_MSG_HW, "No power capability. Breaking.\n"); + return 0; + } + + pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr); + + switch (state) { + case PCI_D0: + pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, + ((pmcsr & ~PCI_PM_CTRL_STATE_MASK) | + PCI_PM_CTRL_PME_STATUS)); + + if (pmcsr & PCI_PM_CTRL_STATE_MASK) + /* delay required during transition out of D3hot */ + msleep(20); + break; + + case PCI_D3hot: + /* If there are other clients above don't + shut down the power */ + if (atomic_read(&bp->pdev->enable_cnt) != 1) + return 0; + /* Don't shut down the power for emulation and FPGA */ + if (CHIP_REV_IS_SLOW(bp)) + return 0; + + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= 3; + + if (bp->wol) + pmcsr |= PCI_PM_CTRL_PME_ENABLE; + + pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, + pmcsr); + + /* No more memory access after this point until + * device is brought back to D0. + */ + break; + + default: + return -EINVAL; + } + return 0; +} + +/* + * net_device service functions + */ +int bnx2x_poll(struct napi_struct *napi, int budget) +{ + int work_done = 0; + u8 cos; + struct bnx2x_fastpath *fp = container_of(napi, struct bnx2x_fastpath, + napi); + struct bnx2x *bp = fp->bp; + + while (1) { +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) { + napi_complete(napi); + return 0; + } +#endif + + for_each_cos_in_tx_queue(fp, cos) + if (bnx2x_tx_queue_has_work(&fp->txdata[cos])) + bnx2x_tx_int(bp, &fp->txdata[cos]); + + + if (bnx2x_has_rx_work(fp)) { + work_done += bnx2x_rx_int(fp, budget - work_done); + + /* must not complete if we consumed full budget */ + if (work_done >= budget) + break; + } + + /* Fall out from the NAPI loop if needed */ + if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { +#ifdef BCM_CNIC + /* No need to update SB for FCoE L2 ring as long as + * it's connected to the default SB and the SB + * has been updated when NAPI was scheduled. + */ + if (IS_FCOE_FP(fp)) { + napi_complete(napi); + break; + } +#endif + + bnx2x_update_fpsb_idx(fp); + /* bnx2x_has_rx_work() reads the status block, + * thus we need to ensure that status block indices + * have been actually read (bnx2x_update_fpsb_idx) + * prior to this check (bnx2x_has_rx_work) so that + * we won't write the "newer" value of the status block + * to IGU (if there was a DMA right after + * bnx2x_has_rx_work and if there is no rmb, the memory + * reading (bnx2x_update_fpsb_idx) may be postponed + * to right before bnx2x_ack_sb). In this case there + * will never be another interrupt until there is + * another update of the status block, while there + * is still unhandled work. + */ + rmb(); + + if (!(bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp))) { + napi_complete(napi); + /* Re-enable interrupts */ + DP(NETIF_MSG_HW, + "Update index to %d\n", fp->fp_hc_idx); + bnx2x_ack_sb(bp, fp->igu_sb_id, USTORM_ID, + le16_to_cpu(fp->fp_hc_idx), + IGU_INT_ENABLE, 1); + break; + } + } + } + + return work_done; +} + +/* we split the first BD into headers and data BDs + * to ease the pain of our fellow microcode engineers + * we use one mapping for both BDs + * So far this has only been observed to happen + * in Other Operating Systems(TM) + */ +static noinline u16 bnx2x_tx_split(struct bnx2x *bp, + struct bnx2x_fp_txdata *txdata, + struct sw_tx_bd *tx_buf, + struct eth_tx_start_bd **tx_bd, u16 hlen, + u16 bd_prod, int nbd) +{ + struct eth_tx_start_bd *h_tx_bd = *tx_bd; + struct eth_tx_bd *d_tx_bd; + dma_addr_t mapping; + int old_len = le16_to_cpu(h_tx_bd->nbytes); + + /* first fix first BD */ + h_tx_bd->nbd = cpu_to_le16(nbd); + h_tx_bd->nbytes = cpu_to_le16(hlen); + + DP(NETIF_MSG_TX_QUEUED, "TSO split header size is %d " + "(%x:%x) nbd %d\n", h_tx_bd->nbytes, h_tx_bd->addr_hi, + h_tx_bd->addr_lo, h_tx_bd->nbd); + + /* now get a new data BD + * (after the pbd) and fill it */ + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + d_tx_bd = &txdata->tx_desc_ring[bd_prod].reg_bd; + + mapping = HILO_U64(le32_to_cpu(h_tx_bd->addr_hi), + le32_to_cpu(h_tx_bd->addr_lo)) + hlen; + + d_tx_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + d_tx_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + d_tx_bd->nbytes = cpu_to_le16(old_len - hlen); + + /* this marks the BD as one that has no individual mapping */ + tx_buf->flags |= BNX2X_TSO_SPLIT_BD; + + DP(NETIF_MSG_TX_QUEUED, + "TSO split data size is %d (%x:%x)\n", + d_tx_bd->nbytes, d_tx_bd->addr_hi, d_tx_bd->addr_lo); + + /* update tx_bd */ + *tx_bd = (struct eth_tx_start_bd *)d_tx_bd; + + return bd_prod; +} + +static inline u16 bnx2x_csum_fix(unsigned char *t_header, u16 csum, s8 fix) +{ + if (fix > 0) + csum = (u16) ~csum_fold(csum_sub(csum, + csum_partial(t_header - fix, fix, 0))); + + else if (fix < 0) + csum = (u16) ~csum_fold(csum_add(csum, + csum_partial(t_header, -fix, 0))); + + return swab16(csum); +} + +static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) +{ + u32 rc; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + rc = XMIT_PLAIN; + + else { + if (vlan_get_protocol(skb) == htons(ETH_P_IPV6)) { + rc = XMIT_CSUM_V6; + if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) + rc |= XMIT_CSUM_TCP; + + } else { + rc = XMIT_CSUM_V4; + if (ip_hdr(skb)->protocol == IPPROTO_TCP) + rc |= XMIT_CSUM_TCP; + } + } + + if (skb_is_gso_v6(skb)) + rc |= XMIT_GSO_V6 | XMIT_CSUM_TCP | XMIT_CSUM_V6; + else if (skb_is_gso(skb)) + rc |= XMIT_GSO_V4 | XMIT_CSUM_V4 | XMIT_CSUM_TCP; + + return rc; +} + +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) +/* check if packet requires linearization (packet is too fragmented) + no need to check fragmentation if page size > 8K (there will be no + violation to FW restrictions) */ +static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, + u32 xmit_type) +{ + int to_copy = 0; + int hlen = 0; + int first_bd_sz = 0; + + /* 3 = 1 (for linear data BD) + 2 (for PBD and last BD) */ + if (skb_shinfo(skb)->nr_frags >= (MAX_FETCH_BD - 3)) { + + if (xmit_type & XMIT_GSO) { + unsigned short lso_mss = skb_shinfo(skb)->gso_size; + /* Check if LSO packet needs to be copied: + 3 = 1 (for headers BD) + 2 (for PBD and last BD) */ + int wnd_size = MAX_FETCH_BD - 3; + /* Number of windows to check */ + int num_wnds = skb_shinfo(skb)->nr_frags - wnd_size; + int wnd_idx = 0; + int frag_idx = 0; + u32 wnd_sum = 0; + + /* Headers length */ + hlen = (int)(skb_transport_header(skb) - skb->data) + + tcp_hdrlen(skb); + + /* Amount of data (w/o headers) on linear part of SKB*/ + first_bd_sz = skb_headlen(skb) - hlen; + + wnd_sum = first_bd_sz; + + /* Calculate the first sum - it's special */ + for (frag_idx = 0; frag_idx < wnd_size - 1; frag_idx++) + wnd_sum += + skb_frag_size(&skb_shinfo(skb)->frags[frag_idx]); + + /* If there was data on linear skb data - check it */ + if (first_bd_sz > 0) { + if (unlikely(wnd_sum < lso_mss)) { + to_copy = 1; + goto exit_lbl; + } + + wnd_sum -= first_bd_sz; + } + + /* Others are easier: run through the frag list and + check all windows */ + for (wnd_idx = 0; wnd_idx <= num_wnds; wnd_idx++) { + wnd_sum += + skb_frag_size(&skb_shinfo(skb)->frags[wnd_idx + wnd_size - 1]); + + if (unlikely(wnd_sum < lso_mss)) { + to_copy = 1; + break; + } + wnd_sum -= + skb_frag_size(&skb_shinfo(skb)->frags[wnd_idx]); + } + } else { + /* in non-LSO too fragmented packet should always + be linearized */ + to_copy = 1; + } + } + +exit_lbl: + if (unlikely(to_copy)) + DP(NETIF_MSG_TX_QUEUED, + "Linearization IS REQUIRED for %s packet. " + "num_frags %d hlen %d first_bd_sz %d\n", + (xmit_type & XMIT_GSO) ? "LSO" : "non-LSO", + skb_shinfo(skb)->nr_frags, hlen, first_bd_sz); + + return to_copy; +} +#endif + +static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data, + u32 xmit_type) +{ + *parsing_data |= (skb_shinfo(skb)->gso_size << + ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) & + ETH_TX_PARSE_BD_E2_LSO_MSS; + if ((xmit_type & XMIT_GSO_V6) && + (ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6)) + *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR; +} + +/** + * bnx2x_set_pbd_gso - update PBD in GSO case. + * + * @skb: packet skb + * @pbd: parse BD + * @xmit_type: xmit flags + */ +static inline void bnx2x_set_pbd_gso(struct sk_buff *skb, + struct eth_tx_parse_bd_e1x *pbd, + u32 xmit_type) +{ + pbd->lso_mss = cpu_to_le16(skb_shinfo(skb)->gso_size); + pbd->tcp_send_seq = swab32(tcp_hdr(skb)->seq); + pbd->tcp_flags = pbd_tcp_flags(skb); + + if (xmit_type & XMIT_GSO_V4) { + pbd->ip_id = swab16(ip_hdr(skb)->id); + pbd->tcp_pseudo_csum = + swab16(~csum_tcpudp_magic(ip_hdr(skb)->saddr, + ip_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0)); + + } else + pbd->tcp_pseudo_csum = + swab16(~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0)); + + pbd->global_data |= ETH_TX_PARSE_BD_E1X_PSEUDO_CS_WITHOUT_LEN; +} + +/** + * bnx2x_set_pbd_csum_e2 - update PBD with checksum and return header length + * + * @bp: driver handle + * @skb: packet skb + * @parsing_data: data to be updated + * @xmit_type: xmit flags + * + * 57712 related + */ +static inline u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb, + u32 *parsing_data, u32 xmit_type) +{ + *parsing_data |= + ((((u8 *)skb_transport_header(skb) - skb->data) >> 1) << + ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) & + ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W; + + if (xmit_type & XMIT_CSUM_TCP) { + *parsing_data |= ((tcp_hdrlen(skb) / 4) << + ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) & + ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW; + + return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data; + } else + /* We support checksum offload for TCP and UDP only. + * No need to pass the UDP header length - it's a constant. + */ + return skb_transport_header(skb) + + sizeof(struct udphdr) - skb->data; +} + +static inline void bnx2x_set_sbd_csum(struct bnx2x *bp, struct sk_buff *skb, + struct eth_tx_start_bd *tx_start_bd, u32 xmit_type) +{ + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_L4_CSUM; + + if (xmit_type & XMIT_CSUM_V4) + tx_start_bd->bd_flags.as_bitfield |= + ETH_TX_BD_FLAGS_IP_CSUM; + else + tx_start_bd->bd_flags.as_bitfield |= + ETH_TX_BD_FLAGS_IPV6; + + if (!(xmit_type & XMIT_CSUM_TCP)) + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_IS_UDP; +} + +/** + * bnx2x_set_pbd_csum - update PBD with checksum and return header length + * + * @bp: driver handle + * @skb: packet skb + * @pbd: parse BD to be updated + * @xmit_type: xmit flags + */ +static inline u8 bnx2x_set_pbd_csum(struct bnx2x *bp, struct sk_buff *skb, + struct eth_tx_parse_bd_e1x *pbd, + u32 xmit_type) +{ + u8 hlen = (skb_network_header(skb) - skb->data) >> 1; + + /* for now NS flag is not used in Linux */ + pbd->global_data = + (hlen | ((skb->protocol == cpu_to_be16(ETH_P_8021Q)) << + ETH_TX_PARSE_BD_E1X_LLC_SNAP_EN_SHIFT)); + + pbd->ip_hlen_w = (skb_transport_header(skb) - + skb_network_header(skb)) >> 1; + + hlen += pbd->ip_hlen_w; + + /* We support checksum offload for TCP and UDP only */ + if (xmit_type & XMIT_CSUM_TCP) + hlen += tcp_hdrlen(skb) / 2; + else + hlen += sizeof(struct udphdr) / 2; + + pbd->total_hlen_w = cpu_to_le16(hlen); + hlen = hlen*2; + + if (xmit_type & XMIT_CSUM_TCP) { + pbd->tcp_pseudo_csum = swab16(tcp_hdr(skb)->check); + + } else { + s8 fix = SKB_CS_OFF(skb); /* signed! */ + + DP(NETIF_MSG_TX_QUEUED, + "hlen %d fix %d csum before fix %x\n", + le16_to_cpu(pbd->total_hlen_w), fix, SKB_CS(skb)); + + /* HW bug: fixup the CSUM */ + pbd->tcp_pseudo_csum = + bnx2x_csum_fix(skb_transport_header(skb), + SKB_CS(skb), fix); + + DP(NETIF_MSG_TX_QUEUED, "csum after fix %x\n", + pbd->tcp_pseudo_csum); + } + + return hlen; +} + +/* called with netif_tx_lock + * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call + * netif_wake_queue() + */ +netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + struct bnx2x_fastpath *fp; + struct netdev_queue *txq; + struct bnx2x_fp_txdata *txdata; + struct sw_tx_bd *tx_buf; + struct eth_tx_start_bd *tx_start_bd, *first_bd; + struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL; + struct eth_tx_parse_bd_e1x *pbd_e1x = NULL; + struct eth_tx_parse_bd_e2 *pbd_e2 = NULL; + u32 pbd_e2_parsing_data = 0; + u16 pkt_prod, bd_prod; + int nbd, txq_index, fp_index, txdata_index; + dma_addr_t mapping; + u32 xmit_type = bnx2x_xmit_type(bp, skb); + int i; + u8 hlen = 0; + __le16 pkt_size = 0; + struct ethhdr *eth; + u8 mac_type = UNICAST_ADDRESS; + +#ifdef BNX2X_STOP_ON_ERROR + if (unlikely(bp->panic)) + return NETDEV_TX_BUSY; +#endif + + txq_index = skb_get_queue_mapping(skb); + txq = netdev_get_tx_queue(dev, txq_index); + + BUG_ON(txq_index >= MAX_ETH_TXQ_IDX(bp) + FCOE_PRESENT); + + /* decode the fastpath index and the cos index from the txq */ + fp_index = TXQ_TO_FP(txq_index); + txdata_index = TXQ_TO_COS(txq_index); + +#ifdef BCM_CNIC + /* + * Override the above for the FCoE queue: + * - FCoE fp entry is right after the ETH entries. + * - FCoE L2 queue uses bp->txdata[0] only. + */ + if (unlikely(!NO_FCOE(bp) && (txq_index == + bnx2x_fcoe_tx(bp, txq_index)))) { + fp_index = FCOE_IDX; + txdata_index = 0; + } +#endif + + /* enable this debug print to view the transmission queue being used + DP(BNX2X_MSG_FP, "indices: txq %d, fp %d, txdata %d\n", + txq_index, fp_index, txdata_index); */ + + /* locate the fastpath and the txdata */ + fp = &bp->fp[fp_index]; + txdata = &fp->txdata[txdata_index]; + + /* enable this debug print to view the tranmission details + DP(BNX2X_MSG_FP,"transmitting packet cid %d fp index %d txdata_index %d" + " tx_data ptr %p fp pointer %p\n", + txdata->cid, fp_index, txdata_index, txdata, fp); */ + + if (unlikely(bnx2x_tx_avail(bp, txdata) < + (skb_shinfo(skb)->nr_frags + 3))) { + fp->eth_q_stats.driver_xoff++; + netif_tx_stop_queue(txq); + BNX2X_ERR("BUG! Tx ring full when queue awake!\n"); + return NETDEV_TX_BUSY; + } + + DP(NETIF_MSG_TX_QUEUED, "queue[%d]: SKB: summed %x protocol %x " + "protocol(%x,%x) gso type %x xmit_type %x\n", + txq_index, skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, + ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type); + + eth = (struct ethhdr *)skb->data; + + /* set flag according to packet type (UNICAST_ADDRESS is default)*/ + if (unlikely(is_multicast_ether_addr(eth->h_dest))) { + if (is_broadcast_ether_addr(eth->h_dest)) + mac_type = BROADCAST_ADDRESS; + else + mac_type = MULTICAST_ADDRESS; + } + +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) + /* First, check if we need to linearize the skb (due to FW + restrictions). No need to check fragmentation if page size > 8K + (there will be no violation to FW restrictions) */ + if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) { + /* Statistics of linearization */ + bp->lin_cnt++; + if (skb_linearize(skb) != 0) { + DP(NETIF_MSG_TX_QUEUED, "SKB linearization failed - " + "silently dropping this SKB\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + } +#endif + /* Map skb linear data for DMA */ + mapping = dma_map_single(&bp->pdev->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + DP(NETIF_MSG_TX_QUEUED, "SKB mapping failed - " + "silently dropping this SKB\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + /* + Please read carefully. First we use one BD which we mark as start, + then we have a parsing info BD (used for TSO or xsum), + and only then we have the rest of the TSO BDs. + (don't forget to mark the last one as last, + and to unmap only AFTER you write to the BD ...) + And above all, all pdb sizes are in words - NOT DWORDS! + */ + + /* get current pkt produced now - advance it just before sending packet + * since mapping of pages may fail and cause packet to be dropped + */ + pkt_prod = txdata->tx_pkt_prod; + bd_prod = TX_BD(txdata->tx_bd_prod); + + /* get a tx_buf and first BD + * tx_start_bd may be changed during SPLIT, + * but first_bd will always stay first + */ + tx_buf = &txdata->tx_buf_ring[TX_BD(pkt_prod)]; + tx_start_bd = &txdata->tx_desc_ring[bd_prod].start_bd; + first_bd = tx_start_bd; + + tx_start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD; + SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_ETH_ADDR_TYPE, + mac_type); + + /* header nbd */ + SET_FLAG(tx_start_bd->general_data, ETH_TX_START_BD_HDR_NBDS, 1); + + /* remember the first BD of the packet */ + tx_buf->first_bd = txdata->tx_bd_prod; + tx_buf->skb = skb; + tx_buf->flags = 0; + + DP(NETIF_MSG_TX_QUEUED, + "sending pkt %u @%p next_idx %u bd %u @%p\n", + pkt_prod, tx_buf, txdata->tx_pkt_prod, bd_prod, tx_start_bd); + + if (vlan_tx_tag_present(skb)) { + tx_start_bd->vlan_or_ethertype = + cpu_to_le16(vlan_tx_tag_get(skb)); + tx_start_bd->bd_flags.as_bitfield |= + (X_ETH_OUTBAND_VLAN << ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT); + } else + tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod); + + /* turn on parsing and get a BD */ + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + + if (xmit_type & XMIT_CSUM) + bnx2x_set_sbd_csum(bp, skb, tx_start_bd, xmit_type); + + if (!CHIP_IS_E1x(bp)) { + pbd_e2 = &txdata->tx_desc_ring[bd_prod].parse_bd_e2; + memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2)); + /* Set PBD in checksum offload case */ + if (xmit_type & XMIT_CSUM) + hlen = bnx2x_set_pbd_csum_e2(bp, skb, + &pbd_e2_parsing_data, + xmit_type); + if (IS_MF_SI(bp)) { + /* + * fill in the MAC addresses in the PBD - for local + * switching + */ + bnx2x_set_fw_mac_addr(&pbd_e2->src_mac_addr_hi, + &pbd_e2->src_mac_addr_mid, + &pbd_e2->src_mac_addr_lo, + eth->h_source); + bnx2x_set_fw_mac_addr(&pbd_e2->dst_mac_addr_hi, + &pbd_e2->dst_mac_addr_mid, + &pbd_e2->dst_mac_addr_lo, + eth->h_dest); + } + } else { + pbd_e1x = &txdata->tx_desc_ring[bd_prod].parse_bd_e1x; + memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x)); + /* Set PBD in checksum offload case */ + if (xmit_type & XMIT_CSUM) + hlen = bnx2x_set_pbd_csum(bp, skb, pbd_e1x, xmit_type); + + } + + /* Setup the data pointer of the first BD of the packet */ + tx_start_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + tx_start_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + nbd = 2; /* start_bd + pbd + frags (updated when pages are mapped) */ + tx_start_bd->nbytes = cpu_to_le16(skb_headlen(skb)); + pkt_size = tx_start_bd->nbytes; + + DP(NETIF_MSG_TX_QUEUED, "first bd @%p addr (%x:%x) nbd %d" + " nbytes %d flags %x vlan %x\n", + tx_start_bd, tx_start_bd->addr_hi, tx_start_bd->addr_lo, + le16_to_cpu(tx_start_bd->nbd), le16_to_cpu(tx_start_bd->nbytes), + tx_start_bd->bd_flags.as_bitfield, + le16_to_cpu(tx_start_bd->vlan_or_ethertype)); + + if (xmit_type & XMIT_GSO) { + + DP(NETIF_MSG_TX_QUEUED, + "TSO packet len %d hlen %d total len %d tso size %d\n", + skb->len, hlen, skb_headlen(skb), + skb_shinfo(skb)->gso_size); + + tx_start_bd->bd_flags.as_bitfield |= ETH_TX_BD_FLAGS_SW_LSO; + + if (unlikely(skb_headlen(skb) > hlen)) + bd_prod = bnx2x_tx_split(bp, txdata, tx_buf, + &tx_start_bd, hlen, + bd_prod, ++nbd); + if (!CHIP_IS_E1x(bp)) + bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data, + xmit_type); + else + bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type); + } + + /* Set the PBD's parsing_data field if not zero + * (for the chips newer than 57711). + */ + if (pbd_e2_parsing_data) + pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data); + + tx_data_bd = (struct eth_tx_bd *)tx_start_bd; + + /* Handle fragmented skb */ + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + mapping = skb_frag_dma_map(&bp->pdev->dev, frag, 0, + skb_frag_size(frag), DMA_TO_DEVICE); + if (unlikely(dma_mapping_error(&bp->pdev->dev, mapping))) { + + DP(NETIF_MSG_TX_QUEUED, "Unable to map page - " + "dropping packet...\n"); + + /* we need unmap all buffers already mapped + * for this SKB; + * first_bd->nbd need to be properly updated + * before call to bnx2x_free_tx_pkt + */ + first_bd->nbd = cpu_to_le16(nbd); + bnx2x_free_tx_pkt(bp, txdata, + TX_BD(txdata->tx_pkt_prod)); + return NETDEV_TX_OK; + } + + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + tx_data_bd = &txdata->tx_desc_ring[bd_prod].reg_bd; + if (total_pkt_bd == NULL) + total_pkt_bd = &txdata->tx_desc_ring[bd_prod].reg_bd; + + tx_data_bd->addr_hi = cpu_to_le32(U64_HI(mapping)); + tx_data_bd->addr_lo = cpu_to_le32(U64_LO(mapping)); + tx_data_bd->nbytes = cpu_to_le16(skb_frag_size(frag)); + le16_add_cpu(&pkt_size, skb_frag_size(frag)); + nbd++; + + DP(NETIF_MSG_TX_QUEUED, + "frag %d bd @%p addr (%x:%x) nbytes %d\n", + i, tx_data_bd, tx_data_bd->addr_hi, tx_data_bd->addr_lo, + le16_to_cpu(tx_data_bd->nbytes)); + } + + DP(NETIF_MSG_TX_QUEUED, "last bd @%p\n", tx_data_bd); + + /* update with actual num BDs */ + first_bd->nbd = cpu_to_le16(nbd); + + bd_prod = TX_BD(NEXT_TX_IDX(bd_prod)); + + /* now send a tx doorbell, counting the next BD + * if the packet contains or ends with it + */ + if (TX_BD_POFF(bd_prod) < nbd) + nbd++; + + /* total_pkt_bytes should be set on the first data BD if + * it's not an LSO packet and there is more than one + * data BD. In this case pkt_size is limited by an MTU value. + * However we prefer to set it for an LSO packet (while we don't + * have to) in order to save some CPU cycles in a none-LSO + * case, when we much more care about them. + */ + if (total_pkt_bd != NULL) + total_pkt_bd->total_pkt_bytes = pkt_size; + + if (pbd_e1x) + DP(NETIF_MSG_TX_QUEUED, + "PBD (E1X) @%p ip_data %x ip_hlen %u ip_id %u lso_mss %u" + " tcp_flags %x xsum %x seq %u hlen %u\n", + pbd_e1x, pbd_e1x->global_data, pbd_e1x->ip_hlen_w, + pbd_e1x->ip_id, pbd_e1x->lso_mss, pbd_e1x->tcp_flags, + pbd_e1x->tcp_pseudo_csum, pbd_e1x->tcp_send_seq, + le16_to_cpu(pbd_e1x->total_hlen_w)); + if (pbd_e2) + DP(NETIF_MSG_TX_QUEUED, + "PBD (E2) @%p dst %x %x %x src %x %x %x parsing_data %x\n", + pbd_e2, pbd_e2->dst_mac_addr_hi, pbd_e2->dst_mac_addr_mid, + pbd_e2->dst_mac_addr_lo, pbd_e2->src_mac_addr_hi, + pbd_e2->src_mac_addr_mid, pbd_e2->src_mac_addr_lo, + pbd_e2->parsing_data); + DP(NETIF_MSG_TX_QUEUED, "doorbell: nbd %d bd %u\n", nbd, bd_prod); + + txdata->tx_pkt_prod++; + /* + * Make sure that the BD data is updated before updating the producer + * since FW might read the BD right after the producer is updated. + * This is only applicable for weak-ordered memory model archs such + * as IA-64. The following barrier is also mandatory since FW will + * assumes packets must have BDs. + */ + wmb(); + + txdata->tx_db.data.prod += nbd; + barrier(); + + DOORBELL(bp, txdata->cid, txdata->tx_db.raw); + + mmiowb(); + + txdata->tx_bd_prod += nbd; + + if (unlikely(bnx2x_tx_avail(bp, txdata) < MAX_SKB_FRAGS + 3)) { + netif_tx_stop_queue(txq); + + /* paired memory barrier is in bnx2x_tx_int(), we have to keep + * ordering of set_bit() in netif_tx_stop_queue() and read of + * fp->bd_tx_cons */ + smp_mb(); + + fp->eth_q_stats.driver_xoff++; + if (bnx2x_tx_avail(bp, txdata) >= MAX_SKB_FRAGS + 3) + netif_tx_wake_queue(txq); + } + txdata->tx_pkt++; + + return NETDEV_TX_OK; +} + +/** + * bnx2x_setup_tc - routine to configure net_device for multi tc + * + * @netdev: net device to configure + * @tc: number of traffic classes to enable + * + * callback connected to the ndo_setup_tc function pointer + */ +int bnx2x_setup_tc(struct net_device *dev, u8 num_tc) +{ + int cos, prio, count, offset; + struct bnx2x *bp = netdev_priv(dev); + + /* setup tc must be called under rtnl lock */ + ASSERT_RTNL(); + + /* no traffic classes requested. aborting */ + if (!num_tc) { + netdev_reset_tc(dev); + return 0; + } + + /* requested to support too many traffic classes */ + if (num_tc > bp->max_cos) { + DP(NETIF_MSG_TX_ERR, "support for too many traffic classes" + " requested: %d. max supported is %d\n", + num_tc, bp->max_cos); + return -EINVAL; + } + + /* declare amount of supported traffic classes */ + if (netdev_set_num_tc(dev, num_tc)) { + DP(NETIF_MSG_TX_ERR, "failed to declare %d traffic classes\n", + num_tc); + return -EINVAL; + } + + /* configure priority to traffic class mapping */ + for (prio = 0; prio < BNX2X_MAX_PRIORITY; prio++) { + netdev_set_prio_tc_map(dev, prio, bp->prio_to_cos[prio]); + DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", + prio, bp->prio_to_cos[prio]); + } + + + /* Use this configuration to diffrentiate tc0 from other COSes + This can be used for ets or pfc, and save the effort of setting + up a multio class queue disc or negotiating DCBX with a switch + netdev_set_prio_tc_map(dev, 0, 0); + DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", 0, 0); + for (prio = 1; prio < 16; prio++) { + netdev_set_prio_tc_map(dev, prio, 1); + DP(BNX2X_MSG_SP, "mapping priority %d to tc %d\n", prio, 1); + } */ + + /* configure traffic class to transmission queue mapping */ + for (cos = 0; cos < bp->max_cos; cos++) { + count = BNX2X_NUM_ETH_QUEUES(bp); + offset = cos * MAX_TXQS_PER_COS; + netdev_set_tc_queue(dev, cos, count, offset); + DP(BNX2X_MSG_SP, "mapping tc %d to offset %d count %d\n", + cos, offset, count); + } + + return 0; +} + +/* called with rtnl_lock */ +int bnx2x_change_mac_addr(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct bnx2x *bp = netdev_priv(dev); + int rc = 0; + + if (!is_valid_ether_addr((u8 *)(addr->sa_data))) + return -EINVAL; + + if (netif_running(dev)) { + rc = bnx2x_set_eth_mac(bp, false); + if (rc) + return rc; + } + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + + if (netif_running(dev)) + rc = bnx2x_set_eth_mac(bp, true); + + return rc; +} + +static void bnx2x_free_fp_mem_at(struct bnx2x *bp, int fp_index) +{ + union host_hc_status_block *sb = &bnx2x_fp(bp, fp_index, status_blk); + struct bnx2x_fastpath *fp = &bp->fp[fp_index]; + u8 cos; + + /* Common */ +#ifdef BCM_CNIC + if (IS_FCOE_IDX(fp_index)) { + memset(sb, 0, sizeof(union host_hc_status_block)); + fp->status_blk_mapping = 0; + + } else { +#endif + /* status blocks */ + if (!CHIP_IS_E1x(bp)) + BNX2X_PCI_FREE(sb->e2_sb, + bnx2x_fp(bp, fp_index, + status_blk_mapping), + sizeof(struct host_hc_status_block_e2)); + else + BNX2X_PCI_FREE(sb->e1x_sb, + bnx2x_fp(bp, fp_index, + status_blk_mapping), + sizeof(struct host_hc_status_block_e1x)); +#ifdef BCM_CNIC + } +#endif + /* Rx */ + if (!skip_rx_queue(bp, fp_index)) { + bnx2x_free_rx_bds(fp); + + /* fastpath rx rings: rx_buf rx_desc rx_comp */ + BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_buf_ring)); + BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_desc_ring), + bnx2x_fp(bp, fp_index, rx_desc_mapping), + sizeof(struct eth_rx_bd) * NUM_RX_BD); + + BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_comp_ring), + bnx2x_fp(bp, fp_index, rx_comp_mapping), + sizeof(struct eth_fast_path_rx_cqe) * + NUM_RCQ_BD); + + /* SGE ring */ + BNX2X_FREE(bnx2x_fp(bp, fp_index, rx_page_ring)); + BNX2X_PCI_FREE(bnx2x_fp(bp, fp_index, rx_sge_ring), + bnx2x_fp(bp, fp_index, rx_sge_mapping), + BCM_PAGE_SIZE * NUM_RX_SGE_PAGES); + } + + /* Tx */ + if (!skip_tx_queue(bp, fp_index)) { + /* fastpath tx rings: tx_buf tx_desc */ + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = &fp->txdata[cos]; + + DP(BNX2X_MSG_SP, + "freeing tx memory of fp %d cos %d cid %d\n", + fp_index, cos, txdata->cid); + + BNX2X_FREE(txdata->tx_buf_ring); + BNX2X_PCI_FREE(txdata->tx_desc_ring, + txdata->tx_desc_mapping, + sizeof(union eth_tx_bd_types) * NUM_TX_BD); + } + } + /* end of fastpath */ +} + +void bnx2x_free_fp_mem(struct bnx2x *bp) +{ + int i; + for_each_queue(bp, i) + bnx2x_free_fp_mem_at(bp, i); +} + +static inline void set_sb_shortcuts(struct bnx2x *bp, int index) +{ + union host_hc_status_block status_blk = bnx2x_fp(bp, index, status_blk); + if (!CHIP_IS_E1x(bp)) { + bnx2x_fp(bp, index, sb_index_values) = + (__le16 *)status_blk.e2_sb->sb.index_values; + bnx2x_fp(bp, index, sb_running_index) = + (__le16 *)status_blk.e2_sb->sb.running_index; + } else { + bnx2x_fp(bp, index, sb_index_values) = + (__le16 *)status_blk.e1x_sb->sb.index_values; + bnx2x_fp(bp, index, sb_running_index) = + (__le16 *)status_blk.e1x_sb->sb.running_index; + } +} + +static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index) +{ + union host_hc_status_block *sb; + struct bnx2x_fastpath *fp = &bp->fp[index]; + int ring_size = 0; + u8 cos; + int rx_ring_size = 0; + + /* if rx_ring_size specified - use it */ + if (!bp->rx_ring_size) { + + rx_ring_size = MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp); + + /* allocate at least number of buffers required by FW */ + rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA : + MIN_RX_SIZE_TPA, rx_ring_size); + + bp->rx_ring_size = rx_ring_size; + } else + rx_ring_size = bp->rx_ring_size; + + /* Common */ + sb = &bnx2x_fp(bp, index, status_blk); +#ifdef BCM_CNIC + if (!IS_FCOE_IDX(index)) { +#endif + /* status blocks */ + if (!CHIP_IS_E1x(bp)) + BNX2X_PCI_ALLOC(sb->e2_sb, + &bnx2x_fp(bp, index, status_blk_mapping), + sizeof(struct host_hc_status_block_e2)); + else + BNX2X_PCI_ALLOC(sb->e1x_sb, + &bnx2x_fp(bp, index, status_blk_mapping), + sizeof(struct host_hc_status_block_e1x)); +#ifdef BCM_CNIC + } +#endif + + /* FCoE Queue uses Default SB and doesn't ACK the SB, thus no need to + * set shortcuts for it. + */ + if (!IS_FCOE_IDX(index)) + set_sb_shortcuts(bp, index); + + /* Tx */ + if (!skip_tx_queue(bp, index)) { + /* fastpath tx rings: tx_buf tx_desc */ + for_each_cos_in_tx_queue(fp, cos) { + struct bnx2x_fp_txdata *txdata = &fp->txdata[cos]; + + DP(BNX2X_MSG_SP, "allocating tx memory of " + "fp %d cos %d\n", + index, cos); + + BNX2X_ALLOC(txdata->tx_buf_ring, + sizeof(struct sw_tx_bd) * NUM_TX_BD); + BNX2X_PCI_ALLOC(txdata->tx_desc_ring, + &txdata->tx_desc_mapping, + sizeof(union eth_tx_bd_types) * NUM_TX_BD); + } + } + + /* Rx */ + if (!skip_rx_queue(bp, index)) { + /* fastpath rx rings: rx_buf rx_desc rx_comp */ + BNX2X_ALLOC(bnx2x_fp(bp, index, rx_buf_ring), + sizeof(struct sw_rx_bd) * NUM_RX_BD); + BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_desc_ring), + &bnx2x_fp(bp, index, rx_desc_mapping), + sizeof(struct eth_rx_bd) * NUM_RX_BD); + + BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_comp_ring), + &bnx2x_fp(bp, index, rx_comp_mapping), + sizeof(struct eth_fast_path_rx_cqe) * + NUM_RCQ_BD); + + /* SGE ring */ + BNX2X_ALLOC(bnx2x_fp(bp, index, rx_page_ring), + sizeof(struct sw_rx_page) * NUM_RX_SGE); + BNX2X_PCI_ALLOC(bnx2x_fp(bp, index, rx_sge_ring), + &bnx2x_fp(bp, index, rx_sge_mapping), + BCM_PAGE_SIZE * NUM_RX_SGE_PAGES); + /* RX BD ring */ + bnx2x_set_next_page_rx_bd(fp); + + /* CQ ring */ + bnx2x_set_next_page_rx_cq(fp); + + /* BDs */ + ring_size = bnx2x_alloc_rx_bds(fp, rx_ring_size); + if (ring_size < rx_ring_size) + goto alloc_mem_err; + } + + return 0; + +/* handles low memory cases */ +alloc_mem_err: + BNX2X_ERR("Unable to allocate full memory for queue %d (size %d)\n", + index, ring_size); + /* FW will drop all packets if queue is not big enough, + * In these cases we disable the queue + * Min size is different for OOO, TPA and non-TPA queues + */ + if (ring_size < (fp->disable_tpa ? + MIN_RX_SIZE_NONTPA : MIN_RX_SIZE_TPA)) { + /* release memory allocated for this queue */ + bnx2x_free_fp_mem_at(bp, index); + return -ENOMEM; + } + return 0; +} + +int bnx2x_alloc_fp_mem(struct bnx2x *bp) +{ + int i; + + /** + * 1. Allocate FP for leading - fatal if error + * 2. {CNIC} Allocate FCoE FP - fatal if error + * 3. {CNIC} Allocate OOO + FWD - disable OOO if error + * 4. Allocate RSS - fix number of queues if error + */ + + /* leading */ + if (bnx2x_alloc_fp_mem_at(bp, 0)) + return -ENOMEM; + +#ifdef BCM_CNIC + if (!NO_FCOE(bp)) + /* FCoE */ + if (bnx2x_alloc_fp_mem_at(bp, FCOE_IDX)) + /* we will fail load process instead of mark + * NO_FCOE_FLAG + */ + return -ENOMEM; +#endif + + /* RSS */ + for_each_nondefault_eth_queue(bp, i) + if (bnx2x_alloc_fp_mem_at(bp, i)) + break; + + /* handle memory failures */ + if (i != BNX2X_NUM_ETH_QUEUES(bp)) { + int delta = BNX2X_NUM_ETH_QUEUES(bp) - i; + + WARN_ON(delta < 0); +#ifdef BCM_CNIC + /** + * move non eth FPs next to last eth FP + * must be done in that order + * FCOE_IDX < FWD_IDX < OOO_IDX + */ + + /* move FCoE fp even NO_FCOE_FLAG is on */ + bnx2x_move_fp(bp, FCOE_IDX, FCOE_IDX - delta); +#endif + bp->num_queues -= delta; + BNX2X_ERR("Adjusted num of queues from %d to %d\n", + bp->num_queues + delta, bp->num_queues); + } + + return 0; +} + +void bnx2x_free_mem_bp(struct bnx2x *bp) +{ + kfree(bp->fp); + kfree(bp->msix_table); + kfree(bp->ilt); +} + +int __devinit bnx2x_alloc_mem_bp(struct bnx2x *bp) +{ + struct bnx2x_fastpath *fp; + struct msix_entry *tbl; + struct bnx2x_ilt *ilt; + int msix_table_size = 0; + + /* + * The biggest MSI-X table we might need is as a maximum number of fast + * path IGU SBs plus default SB (for PF). + */ + msix_table_size = bp->igu_sb_cnt + 1; + + /* fp array: RSS plus CNIC related L2 queues */ + fp = kzalloc((BNX2X_MAX_RSS_COUNT(bp) + NON_ETH_CONTEXT_USE) * + sizeof(*fp), GFP_KERNEL); + if (!fp) + goto alloc_err; + bp->fp = fp; + + /* msix table */ + tbl = kzalloc(msix_table_size * sizeof(*tbl), GFP_KERNEL); + if (!tbl) + goto alloc_err; + bp->msix_table = tbl; + + /* ilt */ + ilt = kzalloc(sizeof(*ilt), GFP_KERNEL); + if (!ilt) + goto alloc_err; + bp->ilt = ilt; + + return 0; +alloc_err: + bnx2x_free_mem_bp(bp); + return -ENOMEM; + +} + +int bnx2x_reload_if_running(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (unlikely(!netif_running(dev))) + return 0; + + bnx2x_nic_unload(bp, UNLOAD_NORMAL); + return bnx2x_nic_load(bp, LOAD_NORMAL); +} + +int bnx2x_get_cur_phy_idx(struct bnx2x *bp) +{ + u32 sel_phy_idx = 0; + if (bp->link_params.num_phys <= 1) + return INT_PHY; + + if (bp->link_vars.link_up) { + sel_phy_idx = EXT_PHY1; + /* In case link is SERDES, check if the EXT_PHY2 is the one */ + if ((bp->link_vars.link_status & LINK_STATUS_SERDES_LINK) && + (bp->link_params.phy[EXT_PHY2].supported & SUPPORTED_FIBRE)) + sel_phy_idx = EXT_PHY2; + } else { + + switch (bnx2x_phy_selection(&bp->link_params)) { + case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT: + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY: + case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY: + sel_phy_idx = EXT_PHY1; + break; + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY: + case PORT_HW_CFG_PHY_SELECTION_SECOND_PHY_PRIORITY: + sel_phy_idx = EXT_PHY2; + break; + } + } + + return sel_phy_idx; + +} +int bnx2x_get_link_cfg_idx(struct bnx2x *bp) +{ + u32 sel_phy_idx = bnx2x_get_cur_phy_idx(bp); + /* + * The selected actived PHY is always after swapping (in case PHY + * swapping is enabled). So when swapping is enabled, we need to reverse + * the configuration + */ + + if (bp->link_params.multi_phy_config & + PORT_HW_CFG_PHY_SWAPPED_ENABLED) { + if (sel_phy_idx == EXT_PHY1) + sel_phy_idx = EXT_PHY2; + else if (sel_phy_idx == EXT_PHY2) + sel_phy_idx = EXT_PHY1; + } + return LINK_CONFIG_IDX(sel_phy_idx); +} + +#if defined(NETDEV_FCOE_WWNN) && defined(BCM_CNIC) +int bnx2x_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type) +{ + struct bnx2x *bp = netdev_priv(dev); + struct cnic_eth_dev *cp = &bp->cnic_eth_dev; + + switch (type) { + case NETDEV_FCOE_WWNN: + *wwn = HILO_U64(cp->fcoe_wwn_node_name_hi, + cp->fcoe_wwn_node_name_lo); + break; + case NETDEV_FCOE_WWPN: + *wwn = HILO_U64(cp->fcoe_wwn_port_name_hi, + cp->fcoe_wwn_port_name_lo); + break; + default: + return -EINVAL; + } + + return 0; +} +#endif + +/* called with rtnl_lock */ +int bnx2x_change_mtu(struct net_device *dev, int new_mtu) +{ + struct bnx2x *bp = netdev_priv(dev); + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + pr_err("Handling parity error recovery. Try again later\n"); + return -EAGAIN; + } + + if ((new_mtu > ETH_MAX_JUMBO_PACKET_SIZE) || + ((new_mtu + ETH_HLEN) < ETH_MIN_PACKET_SIZE)) + return -EINVAL; + + /* This does not race with packet allocation + * because the actual alloc size is + * only updated as part of load + */ + dev->mtu = new_mtu; + + return bnx2x_reload_if_running(dev); +} + +u32 bnx2x_fix_features(struct net_device *dev, u32 features) +{ + struct bnx2x *bp = netdev_priv(dev); + + /* TPA requires Rx CSUM offloading */ + if (!(features & NETIF_F_RXCSUM) || bp->disable_tpa) + features &= ~NETIF_F_LRO; + + return features; +} + +int bnx2x_set_features(struct net_device *dev, u32 features) +{ + struct bnx2x *bp = netdev_priv(dev); + u32 flags = bp->flags; + bool bnx2x_reload = false; + + if (features & NETIF_F_LRO) + flags |= TPA_ENABLE_FLAG; + else + flags &= ~TPA_ENABLE_FLAG; + + if (features & NETIF_F_LOOPBACK) { + if (bp->link_params.loopback_mode != LOOPBACK_BMAC) { + bp->link_params.loopback_mode = LOOPBACK_BMAC; + bnx2x_reload = true; + } + } else { + if (bp->link_params.loopback_mode != LOOPBACK_NONE) { + bp->link_params.loopback_mode = LOOPBACK_NONE; + bnx2x_reload = true; + } + } + + if (flags ^ bp->flags) { + bp->flags = flags; + bnx2x_reload = true; + } + + if (bnx2x_reload) { + if (bp->recovery_state == BNX2X_RECOVERY_DONE) + return bnx2x_reload_if_running(dev); + /* else: bnx2x_nic_load() will be called at end of recovery */ + } + + return 0; +} + +void bnx2x_tx_timeout(struct net_device *dev) +{ + struct bnx2x *bp = netdev_priv(dev); + +#ifdef BNX2X_STOP_ON_ERROR + if (!bp->panic) + bnx2x_panic(); +#endif + + smp_mb__before_clear_bit(); + set_bit(BNX2X_SP_RTNL_TX_TIMEOUT, &bp->sp_rtnl_state); + smp_mb__after_clear_bit(); + + /* This allows the netif to be shutdown gracefully before resetting */ + schedule_delayed_work(&bp->sp_rtnl_task, 0); +} + +int bnx2x_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + + if (!dev) { + dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); + return -ENODEV; + } + bp = netdev_priv(dev); + + rtnl_lock(); + + pci_save_state(pdev); + + if (!netif_running(dev)) { + rtnl_unlock(); + return 0; + } + + netif_device_detach(dev); + + bnx2x_nic_unload(bp, UNLOAD_CLOSE); + + bnx2x_set_power_state(bp, pci_choose_state(pdev, state)); + + rtnl_unlock(); + + return 0; +} + +int bnx2x_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2x *bp; + int rc; + + if (!dev) { + dev_err(&pdev->dev, "BAD net device from bnx2x_init_one\n"); + return -ENODEV; + } + bp = netdev_priv(dev); + + if (bp->recovery_state != BNX2X_RECOVERY_DONE) { + pr_err("Handling parity error recovery. Try again later\n"); + return -EAGAIN; + } + + rtnl_lock(); + + pci_restore_state(pdev); + + if (!netif_running(dev)) { + rtnl_unlock(); + return 0; + } + + bnx2x_set_power_state(bp, PCI_D0); + netif_device_attach(dev); + + /* Since the chip was reset, clear the FW sequence number */ + bp->fw_seq = 0; + rc = bnx2x_nic_load(bp, LOAD_OPEN); + + rtnl_unlock(); + + return rc; +} + + +void bnx2x_set_ctx_validation(struct bnx2x *bp, struct eth_context *cxt, + u32 cid) +{ + /* ustorm cxt validation */ + cxt->ustorm_ag_context.cdu_usage = + CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid), + CDU_REGION_NUMBER_UCM_AG, ETH_CONNECTION_TYPE); + /* xcontext validation */ + cxt->xstorm_ag_context.cdu_reserved = + CDU_RSRVD_VALUE_TYPE_A(HW_CID(bp, cid), + CDU_REGION_NUMBER_XCM_AG, ETH_CONNECTION_TYPE); +} + +static inline void storm_memset_hc_timeout(struct bnx2x *bp, u8 port, + u8 fw_sb_id, u8 sb_index, + u8 ticks) +{ + + u32 addr = BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_TIMEOUT_OFFSET(fw_sb_id, sb_index); + REG_WR8(bp, addr, ticks); + DP(NETIF_MSG_HW, "port %x fw_sb_id %d sb_index %d ticks %d\n", + port, fw_sb_id, sb_index, ticks); +} + +static inline void storm_memset_hc_disable(struct bnx2x *bp, u8 port, + u16 fw_sb_id, u8 sb_index, + u8 disable) +{ + u32 enable_flag = disable ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT); + u32 addr = BAR_CSTRORM_INTMEM + + CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index); + u16 flags = REG_RD16(bp, addr); + /* clear and set */ + flags &= ~HC_INDEX_DATA_HC_ENABLED; + flags |= enable_flag; + REG_WR16(bp, addr, flags); + DP(NETIF_MSG_HW, "port %x fw_sb_id %d sb_index %d disable %d\n", + port, fw_sb_id, sb_index, disable); +} + +void bnx2x_update_coalesce_sb_index(struct bnx2x *bp, u8 fw_sb_id, + u8 sb_index, u8 disable, u16 usec) +{ + int port = BP_PORT(bp); + u8 ticks = usec / BNX2X_BTR; + + storm_memset_hc_timeout(bp, port, fw_sb_id, sb_index, ticks); + + disable = disable ? 1 : (usec ? 0 : 1); + storm_memset_hc_disable(bp, port, fw_sb_id, sb_index, disable); +} |