diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h')
| -rw-r--r-- | drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h | 496 |
1 files changed, 496 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h new file mode 100644 index 00000000000..2a46e633abe --- /dev/null +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -0,0 +1,496 @@ +/* Copyright 2008-2011 Broadcom Corporation + * + * Unless you and Broadcom execute a separate written software license + * agreement governing use of this software, this software is licensed to you + * under the terms of the GNU General Public License version 2, available + * at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html (the "GPL"). + * + * Notwithstanding the above, under no circumstances may you combine this + * software in any way with any other Broadcom software provided under a + * license other than the GPL, without Broadcom's express prior written + * consent. + * + * Written by Yaniv Rosner + * + */ + +#ifndef BNX2X_LINK_H +#define BNX2X_LINK_H + + + +/***********************************************************/ +/* Defines */ +/***********************************************************/ +#define DEFAULT_PHY_DEV_ADDR 3 +#define E2_DEFAULT_PHY_DEV_ADDR 5 + + + +#define BNX2X_FLOW_CTRL_AUTO PORT_FEATURE_FLOW_CONTROL_AUTO +#define BNX2X_FLOW_CTRL_TX PORT_FEATURE_FLOW_CONTROL_TX +#define BNX2X_FLOW_CTRL_RX PORT_FEATURE_FLOW_CONTROL_RX +#define BNX2X_FLOW_CTRL_BOTH PORT_FEATURE_FLOW_CONTROL_BOTH +#define BNX2X_FLOW_CTRL_NONE PORT_FEATURE_FLOW_CONTROL_NONE + +#define NET_SERDES_IF_XFI 1 +#define NET_SERDES_IF_SFI 2 +#define NET_SERDES_IF_KR 3 +#define NET_SERDES_IF_DXGXS 4 + +#define SPEED_AUTO_NEG 0 +#define SPEED_20000 20000 + +#define SFP_EEPROM_VENDOR_NAME_ADDR 0x14 +#define SFP_EEPROM_VENDOR_NAME_SIZE 16 +#define SFP_EEPROM_VENDOR_OUI_ADDR 0x25 +#define SFP_EEPROM_VENDOR_OUI_SIZE 3 +#define SFP_EEPROM_PART_NO_ADDR 0x28 +#define SFP_EEPROM_PART_NO_SIZE 16 +#define SFP_EEPROM_REVISION_ADDR 0x38 +#define SFP_EEPROM_REVISION_SIZE 4 +#define SFP_EEPROM_SERIAL_ADDR 0x44 +#define SFP_EEPROM_SERIAL_SIZE 16 +#define SFP_EEPROM_DATE_ADDR 0x54 /* ASCII YYMMDD */ +#define SFP_EEPROM_DATE_SIZE 6 +#define PWR_FLT_ERR_MSG_LEN 250 + +#define XGXS_EXT_PHY_TYPE(ext_phy_config) \ + ((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_TYPE_MASK) +#define XGXS_EXT_PHY_ADDR(ext_phy_config) \ + (((ext_phy_config) & PORT_HW_CFG_XGXS_EXT_PHY_ADDR_MASK) >> \ + PORT_HW_CFG_XGXS_EXT_PHY_ADDR_SHIFT) +#define SERDES_EXT_PHY_TYPE(ext_phy_config) \ + ((ext_phy_config) & PORT_HW_CFG_SERDES_EXT_PHY_TYPE_MASK) + +/* Single Media Direct board is the plain 577xx board with CX4/RJ45 jacks */ +#define SINGLE_MEDIA_DIRECT(params) (params->num_phys == 1) +/* Single Media board contains single external phy */ +#define SINGLE_MEDIA(params) (params->num_phys == 2) +/* Dual Media board contains two external phy with different media */ +#define DUAL_MEDIA(params) (params->num_phys == 3) + +#define FW_PARAM_PHY_ADDR_MASK 0x000000FF +#define FW_PARAM_PHY_TYPE_MASK 0x0000FF00 +#define FW_PARAM_MDIO_CTRL_MASK 0xFFFF0000 +#define FW_PARAM_MDIO_CTRL_OFFSET 16 +#define FW_PARAM_PHY_ADDR(fw_param) (fw_param & \ + FW_PARAM_PHY_ADDR_MASK) +#define FW_PARAM_PHY_TYPE(fw_param) (fw_param & \ + FW_PARAM_PHY_TYPE_MASK) +#define FW_PARAM_MDIO_CTRL(fw_param) ((fw_param & \ + FW_PARAM_MDIO_CTRL_MASK) >> \ + FW_PARAM_MDIO_CTRL_OFFSET) +#define FW_PARAM_SET(phy_addr, phy_type, mdio_access) \ + (phy_addr | phy_type | mdio_access << FW_PARAM_MDIO_CTRL_OFFSET) + + +#define PFC_BRB_FULL_LB_XOFF_THRESHOLD 170 +#define PFC_BRB_FULL_LB_XON_THRESHOLD 250 + +#define MAXVAL(a, b) (((a) > (b)) ? (a) : (b)) +/***********************************************************/ +/* Structs */ +/***********************************************************/ +#define INT_PHY 0 +#define EXT_PHY1 1 +#define EXT_PHY2 2 +#define MAX_PHYS 3 + +/* Same configuration is shared between the XGXS and the first external phy */ +#define LINK_CONFIG_SIZE (MAX_PHYS - 1) +#define LINK_CONFIG_IDX(_phy_idx) ((_phy_idx == INT_PHY) ? \ + 0 : (_phy_idx - 1)) +/***********************************************************/ +/* bnx2x_phy struct */ +/* Defines the required arguments and function per phy */ +/***********************************************************/ +struct link_vars; +struct link_params; +struct bnx2x_phy; + +typedef u8 (*config_init_t)(struct bnx2x_phy *phy, struct link_params *params, + struct link_vars *vars); +typedef u8 (*read_status_t)(struct bnx2x_phy *phy, struct link_params *params, + struct link_vars *vars); +typedef void (*link_reset_t)(struct bnx2x_phy *phy, + struct link_params *params); +typedef void (*config_loopback_t)(struct bnx2x_phy *phy, + struct link_params *params); +typedef u8 (*format_fw_ver_t)(u32 raw, u8 *str, u16 *len); +typedef void (*hw_reset_t)(struct bnx2x_phy *phy, struct link_params *params); +typedef void (*set_link_led_t)(struct bnx2x_phy *phy, + struct link_params *params, u8 mode); +typedef void (*phy_specific_func_t)(struct bnx2x_phy *phy, + struct link_params *params, u32 action); + +struct bnx2x_phy { + u32 type; + + /* Loaded during init */ + u8 addr; + u8 def_md_devad; + u16 flags; + /* Require HW lock */ +#define FLAGS_HW_LOCK_REQUIRED (1<<0) + /* No Over-Current detection */ +#define FLAGS_NOC (1<<1) + /* Fan failure detection required */ +#define FLAGS_FAN_FAILURE_DET_REQ (1<<2) + /* Initialize first the XGXS and only then the phy itself */ +#define FLAGS_INIT_XGXS_FIRST (1<<3) +#define FLAGS_WC_DUAL_MODE (1<<4) +#define FLAGS_4_PORT_MODE (1<<5) +#define FLAGS_REARM_LATCH_SIGNAL (1<<6) +#define FLAGS_SFP_NOT_APPROVED (1<<7) +#define FLAGS_MDC_MDIO_WA (1<<8) +#define FLAGS_DUMMY_READ (1<<9) +#define FLAGS_MDC_MDIO_WA_B0 (1<<10) +#define FLAGS_TX_ERROR_CHECK (1<<12) + + /* preemphasis values for the rx side */ + u16 rx_preemphasis[4]; + + /* preemphasis values for the tx side */ + u16 tx_preemphasis[4]; + + /* EMAC address for access MDIO */ + u32 mdio_ctrl; + + u32 supported; + + u32 media_type; +#define ETH_PHY_UNSPECIFIED 0x0 +#define ETH_PHY_SFP_FIBER 0x1 +#define ETH_PHY_XFP_FIBER 0x2 +#define ETH_PHY_DA_TWINAX 0x3 +#define ETH_PHY_BASE_T 0x4 +#define ETH_PHY_KR 0xf0 +#define ETH_PHY_CX4 0xf1 +#define ETH_PHY_NOT_PRESENT 0xff + + /* The address in which version is located*/ + u32 ver_addr; + + u16 req_flow_ctrl; + + u16 req_line_speed; + + u32 speed_cap_mask; + + u16 req_duplex; + u16 rsrv; + /* Called per phy/port init, and it configures LASI, speed, autoneg, + duplex, flow control negotiation, etc. */ + config_init_t config_init; + + /* Called due to interrupt. It determines the link, speed */ + read_status_t read_status; + + /* Called when driver is unloading. Should reset the phy */ + link_reset_t link_reset; + + /* Set the loopback configuration for the phy */ + config_loopback_t config_loopback; + + /* Format the given raw number into str up to len */ + format_fw_ver_t format_fw_ver; + + /* Reset the phy (both ports) */ + hw_reset_t hw_reset; + + /* Set link led mode (on/off/oper)*/ + set_link_led_t set_link_led; + + /* PHY Specific tasks */ + phy_specific_func_t phy_specific_func; +#define DISABLE_TX 1 +#define ENABLE_TX 2 +}; + +/* Inputs parameters to the CLC */ +struct link_params { + + u8 port; + + /* Default / User Configuration */ + u8 loopback_mode; +#define LOOPBACK_NONE 0 +#define LOOPBACK_EMAC 1 +#define LOOPBACK_BMAC 2 +#define LOOPBACK_XGXS 3 +#define LOOPBACK_EXT_PHY 4 +#define LOOPBACK_EXT 5 +#define LOOPBACK_UMAC 6 +#define LOOPBACK_XMAC 7 + + /* Device parameters */ + u8 mac_addr[6]; + + u16 req_duplex[LINK_CONFIG_SIZE]; + u16 req_flow_ctrl[LINK_CONFIG_SIZE]; + + u16 req_line_speed[LINK_CONFIG_SIZE]; /* Also determine AutoNeg */ + + /* shmem parameters */ + u32 shmem_base; + u32 shmem2_base; + u32 speed_cap_mask[LINK_CONFIG_SIZE]; + u32 switch_cfg; +#define SWITCH_CFG_1G PORT_FEATURE_CON_SWITCH_1G_SWITCH +#define SWITCH_CFG_10G PORT_FEATURE_CON_SWITCH_10G_SWITCH +#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT + + u32 lane_config; + + /* Phy register parameter */ + u32 chip_id; + + /* features */ + u32 feature_config_flags; +#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0) +#define FEATURE_CONFIG_PFC_ENABLED (1<<1) +#define FEATURE_CONFIG_BC_SUPPORTS_OPT_MDL_VRFY (1<<2) +#define FEATURE_CONFIG_BC_SUPPORTS_DUAL_PHY_OPT_MDL_VRFY (1<<3) +#define FEATURE_CONFIG_AUTOGREEEN_ENABLED (1<<9) +#define FEATURE_CONFIG_BC_SUPPORTS_SFP_TX_DISABLED (1<<10) + /* Will be populated during common init */ + struct bnx2x_phy phy[MAX_PHYS]; + + /* Will be populated during common init */ + u8 num_phys; + + u8 rsrv; + u16 hw_led_mode; /* part of the hw_config read from the shmem */ + u32 multi_phy_config; + + /* Device pointer passed to all callback functions */ + struct bnx2x *bp; + u16 req_fc_auto_adv; /* Should be set to TX / BOTH when + req_flow_ctrl is set to AUTO */ +}; + +/* Output parameters */ +struct link_vars { + u8 phy_flags; +#define PHY_XGXS_FLAG (1<<0) +#define PHY_SGMII_FLAG (1<<1) +#define PHY_PHYSICAL_LINK_FLAG (1<<2) +#define PHY_HALF_OPEN_CONN_FLAG (1<<3) +#define PHY_OVER_CURRENT_FLAG (1<<4) + + u8 mac_type; +#define MAC_TYPE_NONE 0 +#define MAC_TYPE_EMAC 1 +#define MAC_TYPE_BMAC 2 +#define MAC_TYPE_UMAC 3 +#define MAC_TYPE_XMAC 4 + + u8 phy_link_up; /* internal phy link indication */ + u8 link_up; + + u16 line_speed; + u16 duplex; + + u16 flow_ctrl; + u16 ieee_fc; + + /* The same definitions as the shmem parameter */ + u32 link_status; + u8 fault_detected; + u8 rsrv1; + u16 periodic_flags; +#define PERIODIC_FLAGS_LINK_EVENT 0x0001 + + u32 aeu_int_mask; + u8 rx_tx_asic_rst; + u8 turn_to_run_wc_rt; + u16 rsrv2; +}; + +/***********************************************************/ +/* Functions */ +/***********************************************************/ +int bnx2x_phy_init(struct link_params *params, struct link_vars *vars); + +/* Reset the link. Should be called when driver or interface goes down + Before calling phy firmware upgrade, the reset_ext_phy should be set + to 0 */ +int bnx2x_link_reset(struct link_params *params, struct link_vars *vars, + u8 reset_ext_phy); + +/* bnx2x_link_update should be called upon link interrupt */ +int bnx2x_link_update(struct link_params *params, struct link_vars *vars); + +/* use the following phy functions to read/write from external_phy + In order to use it to read/write internal phy registers, use + DEFAULT_PHY_DEV_ADDR as devad, and (_bank + (_addr & 0xf)) as + the register */ +int bnx2x_phy_read(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 *ret_val); + +int bnx2x_phy_write(struct link_params *params, u8 phy_addr, + u8 devad, u16 reg, u16 val); + +/* Reads the link_status from the shmem, + and update the link vars accordingly */ +void bnx2x_link_status_update(struct link_params *input, + struct link_vars *output); +/* returns string representing the fw_version of the external phy */ +int bnx2x_get_ext_phy_fw_version(struct link_params *params, u8 driver_loaded, + u8 *version, u16 len); + +/* Set/Unset the led + Basically, the CLC takes care of the led for the link, but in case one needs + to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to + blink the led, and LED_MODE_OFF to set the led off.*/ +int bnx2x_set_led(struct link_params *params, + struct link_vars *vars, u8 mode, u32 speed); +#define LED_MODE_OFF 0 +#define LED_MODE_ON 1 +#define LED_MODE_OPER 2 +#define LED_MODE_FRONT_PANEL_OFF 3 + +/* bnx2x_handle_module_detect_int should be called upon module detection + interrupt */ +void bnx2x_handle_module_detect_int(struct link_params *params); + +/* Get the actual link status. In case it returns 0, link is up, + otherwise link is down*/ +int bnx2x_test_link(struct link_params *params, struct link_vars *vars, + u8 is_serdes); + +/* One-time initialization for external phy after power up */ +int bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base_path[], + u32 shmem2_base_path[], u32 chip_id); + +/* Reset the external PHY using GPIO */ +void bnx2x_ext_phy_hw_reset(struct bnx2x *bp, u8 port); + +/* Reset the external of SFX7101 */ +void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy); + +/* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */ +int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, + struct link_params *params, u16 addr, + u8 byte_cnt, u8 *o_buf); + +void bnx2x_hw_reset_phy(struct link_params *params); + +/* Checks if HW lock is required for this phy/board type */ +u8 bnx2x_hw_lock_required(struct bnx2x *bp, u32 shmem_base, + u32 shmem2_base); + +/* Check swap bit and adjust PHY order */ +u32 bnx2x_phy_selection(struct link_params *params); + +/* Probe the phys on board, and populate them in "params" */ +int bnx2x_phy_probe(struct link_params *params); + +/* Checks if fan failure detection is required on one of the phys on board */ +u8 bnx2x_fan_failure_det_req(struct bnx2x *bp, u32 shmem_base, + u32 shmem2_base, u8 port); + + + +/* DCBX structs */ + +/* Number of maximum COS per chip */ +#define DCBX_E2E3_MAX_NUM_COS (2) +#define DCBX_E3B0_MAX_NUM_COS_PORT0 (6) +#define DCBX_E3B0_MAX_NUM_COS_PORT1 (3) +#define DCBX_E3B0_MAX_NUM_COS ( \ + MAXVAL(DCBX_E3B0_MAX_NUM_COS_PORT0, \ + DCBX_E3B0_MAX_NUM_COS_PORT1)) + +#define DCBX_MAX_NUM_COS ( \ + MAXVAL(DCBX_E3B0_MAX_NUM_COS, \ + DCBX_E2E3_MAX_NUM_COS)) + +/* PFC port configuration params */ +struct bnx2x_nig_brb_pfc_port_params { + /* NIG */ + u32 pause_enable; + u32 llfc_out_en; + u32 llfc_enable; + u32 pkt_priority_to_cos; + u8 num_of_rx_cos_priority_mask; + u32 rx_cos_priority_mask[DCBX_MAX_NUM_COS]; + u32 llfc_high_priority_classes; + u32 llfc_low_priority_classes; + /* BRB */ + u32 cos0_pauseable; + u32 cos1_pauseable; +}; + + +/* ETS port configuration params */ +struct bnx2x_ets_bw_params { + u8 bw; +}; + +struct bnx2x_ets_sp_params { + /** + * valid values are 0 - 5. 0 is highest strict priority. + * There can't be two COS's with the same pri. + */ + u8 pri; +}; + +enum bnx2x_cos_state { + bnx2x_cos_state_strict = 0, + bnx2x_cos_state_bw = 1, +}; + +struct bnx2x_ets_cos_params { + enum bnx2x_cos_state state ; + union { + struct bnx2x_ets_bw_params bw_params; + struct bnx2x_ets_sp_params sp_params; + } params; +}; + +struct bnx2x_ets_params { + u8 num_of_cos; /* Number of valid COS entries*/ + struct bnx2x_ets_cos_params cos[DCBX_MAX_NUM_COS]; +}; + +/** + * Used to update the PFC attributes in EMAC, BMAC, NIG and BRB + * when link is already up + */ +int bnx2x_update_pfc(struct link_params *params, + struct link_vars *vars, + struct bnx2x_nig_brb_pfc_port_params *pfc_params); + + +/* Used to configure the ETS to disable */ +int bnx2x_ets_disabled(struct link_params *params, + struct link_vars *vars); + +/* Used to configure the ETS to BW limited */ +void bnx2x_ets_bw_limit(const struct link_params *params, const u32 cos0_bw, + const u32 cos1_bw); + +/* Used to configure the ETS to strict */ +int bnx2x_ets_strict(const struct link_params *params, const u8 strict_cos); + + +/* Configure the COS to ETS according to BW and SP settings.*/ +int bnx2x_ets_e3b0_config(const struct link_params *params, + const struct link_vars *vars, + const struct bnx2x_ets_params *ets_params); +/* Read pfc statistic*/ +void bnx2x_pfc_statistic(struct link_params *params, struct link_vars *vars, + u32 pfc_frames_sent[2], + u32 pfc_frames_received[2]); +void bnx2x_init_mod_abs_int(struct bnx2x *bp, struct link_vars *vars, + u32 chip_id, u32 shmem_base, u32 shmem2_base, + u8 port); + +int bnx2x_sfp_module_detection(struct bnx2x_phy *phy, + struct link_params *params); + +void bnx2x_period_func(struct link_params *params, struct link_vars *vars); + +#endif /* BNX2X_LINK_H */ |