diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom')
26 files changed, 712 insertions, 429 deletions
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index a11a8ad9422..986019b2c84 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -1469,7 +1469,7 @@ static int bcm_enet_set_pauseparam(struct net_device *dev, return 0; } -static struct ethtool_ops bcm_enet_ethtool_ops = { +static const struct ethtool_ops bcm_enet_ethtool_ops = { .get_strings = bcm_enet_get_strings, .get_sset_count = bcm_enet_get_sset_count, .get_ethtool_stats = bcm_enet_get_ethtool_stats, @@ -1727,7 +1727,7 @@ static int __devinit bcm_enet_probe(struct platform_device *pdev) bus->priv = priv; bus->read = bcm_enet_mdio_read_phylib; bus->write = bcm_enet_mdio_write_phylib; - sprintf(bus->id, "%d", priv->mac_id); + sprintf(bus->id, "%s-%d", pdev->name, priv->mac_id); /* only probe bus where we think the PHY is, because * the mdio read operation return 0 instead of 0xffff diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 8c73d34b2ff..7d184fbffaf 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -23,8 +23,8 @@ * (you will need to reboot afterwards) */ /* #define BNX2X_STOP_ON_ERROR */ -#define DRV_MODULE_VERSION "1.70.35-0" -#define DRV_MODULE_RELDATE "2011/11/10" +#define DRV_MODULE_VERSION "1.72.00-0" +#define DRV_MODULE_RELDATE "2012/01/26" #define BNX2X_BC_VER 0x040200 #if defined(CONFIG_DCB) @@ -1088,7 +1088,8 @@ enum bnx2x_recovery_state { BNX2X_RECOVERY_DONE, BNX2X_RECOVERY_INIT, BNX2X_RECOVERY_WAIT, - BNX2X_RECOVERY_FAILED + BNX2X_RECOVERY_FAILED, + BNX2X_RECOVERY_NIC_LOADING }; /* diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index 2b731b25359..6e6a684359b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -1,6 +1,6 @@ /* bnx2x_cmn.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -1767,12 +1767,27 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bnx2x_napi_enable(bp); + /* set pf load just before approaching the MCP */ + bnx2x_set_pf_load(bp); + /* Send LOAD_REQUEST command to MCP * Returns the type of LOAD command: * if it is the first port to be initialized * common blocks should be initialized, otherwise - not */ if (!BP_NOMCP(bp)) { + /* init fw_seq */ + bp->fw_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + + /* Get current FW pulse sequence */ + bp->fw_drv_pulse_wr_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_pulse_mb) & + DRV_PULSE_SEQ_MASK); + BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq); + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 0); if (!load_code) { BNX2X_ERR("MCP response failure, aborting\n"); @@ -1783,6 +1798,29 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) rc = -EBUSY; /* other port in diagnostic mode */ LOAD_ERROR_EXIT(bp, load_error1); } + if (load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP && + load_code != FW_MSG_CODE_DRV_LOAD_COMMON) { + /* build FW version dword */ + u32 my_fw = (BCM_5710_FW_MAJOR_VERSION) + + (BCM_5710_FW_MINOR_VERSION << 8) + + (BCM_5710_FW_REVISION_VERSION << 16) + + (BCM_5710_FW_ENGINEERING_VERSION << 24); + + /* read loaded FW from chip */ + u32 loaded_fw = REG_RD(bp, XSEM_REG_PRAM); + + DP(BNX2X_MSG_SP, "loaded fw %x, my fw %x", + loaded_fw, my_fw); + + /* abort nic load if version mismatch */ + if (my_fw != loaded_fw) { + BNX2X_ERR("bnx2x with FW %x already loaded, " + "which mismatches my %x FW. aborting", + loaded_fw, my_fw); + rc = -EBUSY; + LOAD_ERROR_EXIT(bp, load_error2); + } + } } else { int path = BP_PATH(bp); @@ -1949,7 +1987,6 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (bp->state == BNX2X_STATE_OPEN) bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD); #endif - bnx2x_inc_load_cnt(bp); /* Wait for all pending SP commands to complete */ if (!bnx2x_wait_sp_comp(bp, ~0x0UL)) { @@ -1989,6 +2026,8 @@ load_error2: bp->port.pmf = 0; load_error1: bnx2x_napi_disable(bp); + /* clear pf_load status, as it was already set */ + bnx2x_clear_pf_load(bp); load_error0: bnx2x_free_mem(bp); @@ -2109,7 +2148,7 @@ int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* The last driver must disable a "close the gate" if there is no * parity attention or "process kill" pending. */ - if (!bnx2x_dec_load_cnt(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp))) + if (!bnx2x_clear_pf_load(bp) && bnx2x_reset_is_done(bp, BP_PATH(bp))) bnx2x_disable_close_the_gate(bp); return 0; @@ -3117,7 +3156,7 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index) int rx_ring_size = 0; #ifdef BCM_CNIC - if (IS_MF_ISCSI_SD(bp)) { + if (!bp->rx_ring_size && IS_MF_ISCSI_SD(bp)) { rx_ring_size = MIN_RX_SIZE_NONTPA; bp->rx_ring_size = rx_ring_size; } else @@ -3415,7 +3454,7 @@ int bnx2x_change_mtu(struct net_device *dev, int new_mtu) struct bnx2x *bp = netdev_priv(dev); if (bp->recovery_state != BNX2X_RECOVERY_DONE) { - pr_err("Handling parity error recovery. Try again later\n"); + netdev_err(dev, "Handling parity error recovery. Try again later\n"); return -EAGAIN; } @@ -3542,7 +3581,7 @@ int bnx2x_resume(struct pci_dev *pdev) bp = netdev_priv(dev); if (bp->recovery_state != BNX2X_RECOVERY_DONE) { - pr_err("Handling parity error recovery. Try again later\n"); + netdev_err(dev, "Handling parity error recovery. Try again later\n"); return -EAGAIN; } @@ -3558,8 +3597,6 @@ int bnx2x_resume(struct pci_dev *pdev) bnx2x_set_power_state(bp, PCI_D0); netif_device_attach(dev); - /* Since the chip was reset, clear the FW sequence number */ - bp->fw_seq = 0; rc = bnx2x_nic_load(bp, LOAD_OPEN); rtnl_unlock(); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index bf27c54ff2e..c7c7bf1e573 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -1,6 +1,6 @@ /* bnx2x_cmn.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -379,8 +379,8 @@ void bnx2x_set_q_rx_mode(struct bnx2x *bp, u8 cl_id, unsigned long ramrod_flags); /* Parity errors related */ -void bnx2x_inc_load_cnt(struct bnx2x *bp); -u32 bnx2x_dec_load_cnt(struct bnx2x *bp); +void bnx2x_set_pf_load(struct bnx2x *bp); +bool bnx2x_clear_pf_load(struct bnx2x *bp); bool bnx2x_chk_parity_attn(struct bnx2x *bp, bool *global, bool print); bool bnx2x_reset_is_done(struct bnx2x *bp, int engine); void bnx2x_set_reset_in_progress(struct bnx2x *bp); @@ -984,10 +984,11 @@ static inline int bnx2x_func_start(struct bnx2x *bp) /* Function parameters */ start_params->mf_mode = bp->mf_mode; start_params->sd_vlan_tag = bp->mf_ov; - if (CHIP_IS_E1x(bp)) - start_params->network_cos_mode = OVERRIDE_COS; - else + + if (CHIP_IS_E2(bp) || CHIP_IS_E3(bp)) start_params->network_cos_mode = STATIC_COS; + else /* CHIP_IS_E1X */ + start_params->network_cos_mode = FW_WRR; return bnx2x_func_state_change(bp, &func_params); } @@ -1539,7 +1540,7 @@ static inline void bnx2x_update_drv_flags(struct bnx2x *bp, u32 flags, u32 set) { if (SHMEM2_HAS(bp, drv_flags)) { u32 drv_flags; - bnx2x_acquire_hw_lock(bp, HW_LOCK_DRV_FLAGS); + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_DRV_FLAGS); drv_flags = SHMEM2_RD(bp, drv_flags); if (set) @@ -1549,7 +1550,7 @@ static inline void bnx2x_update_drv_flags(struct bnx2x *bp, u32 flags, u32 set) SHMEM2_WR(bp, drv_flags, drv_flags); DP(NETIF_MSG_HW, "drv_flags 0x%08x\n", drv_flags); - bnx2x_release_hw_lock(bp, HW_LOCK_DRV_FLAGS); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_DRV_FLAGS); } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 5051cf3deb2..9a9bd3ab479 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -1,6 +1,6 @@ /* bnx2x_dcb.c: Broadcom Everest network driver. * - * Copyright 2009-2011 Broadcom Corporation + * Copyright 2009-2012 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h index 2ab9254e2d5..06c7a043594 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h @@ -1,6 +1,6 @@ /* bnx2x_dcb.h: Broadcom Everest network driver. * - * Copyright 2009-2011 Broadcom Corporation + * Copyright 2009-2012 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h index b983825d0ee..3e4cff9b1eb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h @@ -1,6 +1,6 @@ /* bnx2x_dump.h: Broadcom Everest network driver. * - * Copyright (c) 2011 Broadcom Corporation + * Copyright (c) 2012 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index a688b9d975a..137968d33d1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -1,6 +1,6 @@ /* bnx2x_ethtool.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -175,7 +175,11 @@ static const struct { { STATS_OFFSET32(total_tpa_aggregated_frames_hi), 8, STATS_FLAGS_FUNC, "tpa_aggregated_frames"}, { STATS_OFFSET32(total_tpa_bytes_hi), - 8, STATS_FLAGS_FUNC, "tpa_bytes"} + 8, STATS_FLAGS_FUNC, "tpa_bytes"}, + { STATS_OFFSET32(recoverable_error), + 4, STATS_FLAGS_FUNC, "recoverable_errors" }, + { STATS_OFFSET32(unrecoverable_error), + 4, STATS_FLAGS_FUNC, "unrecoverable_errors" }, }; #define BNX2X_NUM_STATS ARRAY_SIZE(bnx2x_stats_arr) @@ -365,13 +369,18 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) DP(NETIF_MSG_LINK, "cfg_idx = %x\n", cfg_idx); if (cmd->autoneg == AUTONEG_ENABLE) { + u32 an_supported_speed = bp->port.supported[cfg_idx]; + if (bp->link_params.phy[EXT_PHY1].type == + PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) + an_supported_speed |= (SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full); if (!(bp->port.supported[cfg_idx] & SUPPORTED_Autoneg)) { DP(NETIF_MSG_LINK, "Autoneg not supported\n"); return -EINVAL; } /* advertise the requested speed and duplex if supported */ - if (cmd->advertising & ~(bp->port.supported[cfg_idx])) { + if (cmd->advertising & ~an_supported_speed) { DP(NETIF_MSG_LINK, "Advertisement parameters " "are not supported\n"); return -EINVAL; @@ -877,11 +886,27 @@ static int bnx2x_get_eeprom_len(struct net_device *dev) return bp->common.flash_size; } +/* Per pf misc lock must be aquired before the per port mcp lock. Otherwise, had + * we done things the other way around, if two pfs from the same port would + * attempt to access nvram at the same time, we could run into a scenario such + * as: + * pf A takes the port lock. + * pf B succeeds in taking the same lock since they are from the same port. + * pf A takes the per pf misc lock. Performs eeprom access. + * pf A finishes. Unlocks the per pf misc lock. + * Pf B takes the lock and proceeds to perform it's own access. + * pf A unlocks the per port lock, while pf B is still working (!). + * mcp takes the per port lock and corrupts pf B's access (and/or has it's own + * acess corrupted by pf B).* + */ static int bnx2x_acquire_nvram_lock(struct bnx2x *bp) { int port = BP_PORT(bp); int count, i; - u32 val = 0; + u32 val; + + /* acquire HW lock: protect against other PFs in PF Direct Assignment */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_NVRAM); /* adjust timeout for emulation/FPGA */ count = BNX2X_NVRAM_TIMEOUT_COUNT; @@ -912,7 +937,7 @@ static int bnx2x_release_nvram_lock(struct bnx2x *bp) { int port = BP_PORT(bp); int count, i; - u32 val = 0; + u32 val; /* adjust timeout for emulation/FPGA */ count = BNX2X_NVRAM_TIMEOUT_COUNT; @@ -936,6 +961,8 @@ static int bnx2x_release_nvram_lock(struct bnx2x *bp) return -EBUSY; } + /* release HW lock: protect against other PFs in PF Direct Assignment */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_NVRAM); return 0; } @@ -1365,7 +1392,8 @@ static int bnx2x_set_ringparam(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); if (bp->recovery_state != BNX2X_RECOVERY_DONE) { - pr_err("Handling parity error recovery. Try again later\n"); + netdev_err(dev, "Handling parity error recovery. " + "Try again later\n"); return -EAGAIN; } @@ -1733,7 +1761,7 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode) struct bnx2x_fp_txdata *txdata = &fp_tx->txdata[0]; u16 tx_start_idx, tx_idx; u16 rx_start_idx, rx_idx; - u16 pkt_prod, bd_prod, rx_comp_cons; + u16 pkt_prod, bd_prod; struct sw_tx_bd *tx_buf; struct eth_tx_start_bd *tx_start_bd; struct eth_tx_parse_bd_e1x *pbd_e1x = NULL; @@ -1868,8 +1896,7 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode) if (rx_idx != rx_start_idx + num_pkts) goto test_loopback_exit; - rx_comp_cons = le16_to_cpu(fp_rx->rx_comp_cons); - cqe = &fp_rx->rx_comp_ring[RCQ_BD(rx_comp_cons)]; + cqe = &fp_rx->rx_comp_ring[RCQ_BD(fp_rx->rx_comp_cons)]; cqe_fp_flags = cqe->fast_path_cqe.type_error_flags; cqe_fp_type = cqe_fp_flags & ETH_FAST_PATH_RX_CQE_TYPE; if (!CQE_TYPE_FAST(cqe_fp_type) || (cqe_fp_flags & ETH_RX_ERROR_FALGS)) @@ -2020,7 +2047,8 @@ static void bnx2x_self_test(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); u8 is_serdes; if (bp->recovery_state != BNX2X_RECOVERY_DONE) { - pr_err("Handling parity error recovery. Try again later\n"); + netdev_err(bp->dev, "Handling parity error recovery. " + "Try again later\n"); etest->flags |= ETH_TEST_FL_FAILED; return; } @@ -2116,18 +2144,16 @@ static int bnx2x_get_sset_count(struct net_device *dev, int stringset) case ETH_SS_STATS: if (is_multi(bp)) { num_stats = bnx2x_num_stat_queues(bp) * - BNX2X_NUM_Q_STATS; - if (!IS_MF_MODE_STAT(bp)) - num_stats += BNX2X_NUM_STATS; - } else { - if (IS_MF_MODE_STAT(bp)) { - num_stats = 0; - for (i = 0; i < BNX2X_NUM_STATS; i++) - if (IS_FUNC_STAT(i)) - num_stats++; - } else - num_stats = BNX2X_NUM_STATS; - } + BNX2X_NUM_Q_STATS; + } else + num_stats = 0; + if (IS_MF_MODE_STAT(bp)) { + for (i = 0; i < BNX2X_NUM_STATS; i++) + if (IS_FUNC_STAT(i)) + num_stats++; + } else + num_stats += BNX2X_NUM_STATS; + return num_stats; case ETH_SS_TEST: @@ -2146,8 +2172,8 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf) switch (stringset) { case ETH_SS_STATS: + k = 0; if (is_multi(bp)) { - k = 0; for_each_eth_queue(bp, i) { memset(queue_name, 0, sizeof(queue_name)); sprintf(queue_name, "%d", i); @@ -2158,20 +2184,17 @@ static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf) queue_name); k += BNX2X_NUM_Q_STATS; } - if (IS_MF_MODE_STAT(bp)) - break; - for (j = 0; j < BNX2X_NUM_STATS; j++) - strcpy(buf + (k + j)*ETH_GSTRING_LEN, - bnx2x_stats_arr[j].string); - } else { - for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) { - if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i)) - continue; - strcpy(buf + j*ETH_GSTRING_LEN, - bnx2x_stats_arr[i].string); - j++; - } } + + + for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) { + if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i)) + continue; + strcpy(buf + (k + j)*ETH_GSTRING_LEN, + bnx2x_stats_arr[i].string); + j++; + } + break; case ETH_SS_TEST: @@ -2185,10 +2208,9 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev, { struct bnx2x *bp = netdev_priv(dev); u32 *hw_stats, *offset; - int i, j, k; + int i, j, k = 0; if (is_multi(bp)) { - k = 0; for_each_eth_queue(bp, i) { hw_stats = (u32 *)&bp->fp[i].eth_q_stats; for (j = 0; j < BNX2X_NUM_Q_STATS; j++) { @@ -2209,46 +2231,28 @@ static void bnx2x_get_ethtool_stats(struct net_device *dev, } k += BNX2X_NUM_Q_STATS; } - if (IS_MF_MODE_STAT(bp)) - return; - hw_stats = (u32 *)&bp->eth_stats; - for (j = 0; j < BNX2X_NUM_STATS; j++) { - if (bnx2x_stats_arr[j].size == 0) { - /* skip this counter */ - buf[k + j] = 0; - continue; - } - offset = (hw_stats + bnx2x_stats_arr[j].offset); - if (bnx2x_stats_arr[j].size == 4) { - /* 4-byte counter */ - buf[k + j] = (u64) *offset; - continue; - } - /* 8-byte counter */ - buf[k + j] = HILO_U64(*offset, *(offset + 1)); + } + + hw_stats = (u32 *)&bp->eth_stats; + for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) { + if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i)) + continue; + if (bnx2x_stats_arr[i].size == 0) { + /* skip this counter */ + buf[k + j] = 0; + j++; + continue; } - } else { - hw_stats = (u32 *)&bp->eth_stats; - for (i = 0, j = 0; i < BNX2X_NUM_STATS; i++) { - if (IS_MF_MODE_STAT(bp) && IS_PORT_STAT(i)) - continue; - if (bnx2x_stats_arr[i].size == 0) { - /* skip this counter */ - buf[j] = 0; - j++; - continue; - } - offset = (hw_stats + bnx2x_stats_arr[i].offset); - if (bnx2x_stats_arr[i].size == 4) { - /* 4-byte counter */ - buf[j] = (u64) *offset; - j++; - continue; - } - /* 8-byte counter */ - buf[j] = HILO_U64(*offset, *(offset + 1)); + offset = (hw_stats + bnx2x_stats_arr[i].offset); + if (bnx2x_stats_arr[i].size == 4) { + /* 4-byte counter */ + buf[k + j] = (u64) *offset; j++; + continue; } + /* 8-byte counter */ + buf[k + j] = HILO_U64(*offset, *(offset + 1)); + j++; } } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h index 998652a1b85..e5c5982ae06 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h @@ -1,6 +1,6 @@ /* bnx2x_fw_defs.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h index f4a07fbaed0..4bed52ba300 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h @@ -1,6 +1,6 @@ /* bnx2x_fw_file_hdr.h: FW binary file header structure. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 3e30c8642c2..78b77de728b 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -1,6 +1,6 @@ /* bnx2x_hsi.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h index 4d748e77d1a..29f5c3cca31 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h @@ -1,7 +1,7 @@ /* bnx2x_init.h: Broadcom Everest network driver. * Structures and macroes needed during the initialization. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h index 7ec1724753a..fe66d902dc6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h @@ -2,7 +2,7 @@ * Static functions needed during the initialization. * This file is "included" in bnx2x_main.c. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -69,12 +69,12 @@ static void bnx2x_write_big_buf(struct bnx2x *bp, u32 addr, u32 len, { if (bp->dmae_ready) bnx2x_write_dmae_phys_len(bp, GUNZIP_PHYS(bp), addr, len); - else if (wb) - /* - * Wide bus registers with no dmae need to be written - * using indirect write. - */ + + /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ + else if (wb && CHIP_IS_E1(bp)) bnx2x_init_ind_wr(bp, addr, GUNZIP_BUF(bp), len); + + /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ else bnx2x_init_str_wr(bp, addr, GUNZIP_BUF(bp), len); } @@ -99,8 +99,14 @@ static void bnx2x_write_big_buf_wb(struct bnx2x *bp, u32 addr, u32 len) { if (bp->dmae_ready) bnx2x_write_dmae_phys_len(bp, GUNZIP_PHYS(bp), addr, len); - else + + /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ + else if (CHIP_IS_E1(bp)) bnx2x_init_ind_wr(bp, addr, GUNZIP_BUF(bp), len); + + /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ + else + bnx2x_init_str_wr(bp, addr, GUNZIP_BUF(bp), len); } static void bnx2x_init_wr_64(struct bnx2x *bp, u32 addr, @@ -177,8 +183,14 @@ static void bnx2x_init_wr_wb(struct bnx2x *bp, u32 addr, { if (bp->dmae_ready) VIRT_WR_DMAE_LEN(bp, data, addr, len, 0); - else + + /* in E1 chips BIOS initiated ZLR may interrupt widebus writes */ + else if (CHIP_IS_E1(bp)) bnx2x_init_ind_wr(bp, addr, data, len); + + /* in later chips PXP root complex handles BIOS ZLR w/o interrupting */ + else + bnx2x_init_str_wr(bp, addr, data, len); } static void bnx2x_wr_64(struct bnx2x *bp, u32 reg, u32 val_lo, @@ -840,25 +852,15 @@ static void bnx2x_qm_init_cid_count(struct bnx2x *bp, int qm_cid_count, } } -static void bnx2x_qm_set_ptr_table(struct bnx2x *bp, int qm_cid_count) +static void bnx2x_qm_set_ptr_table(struct bnx2x *bp, int qm_cid_count, + u32 base_reg, u32 reg) { int i; - u32 wb_data[2]; - - wb_data[0] = wb_data[1] = 0; - + u32 wb_data[2] = {0, 0}; for (i = 0; i < 4 * QM_QUEUES_PER_FUNC; i++) { - REG_WR(bp, QM_REG_BASEADDR + i*4, + REG_WR(bp, base_reg + i*4, qm_cid_count * 4 * (i % QM_QUEUES_PER_FUNC)); - bnx2x_init_ind_wr(bp, QM_REG_PTRTBL + i*8, - wb_data, 2); - - if (CHIP_IS_E1H(bp)) { - REG_WR(bp, QM_REG_BASEADDR_EXT_A + i*4, - qm_cid_count * 4 * (i % QM_QUEUES_PER_FUNC)); - bnx2x_init_ind_wr(bp, QM_REG_PTRTBL_EXT_A + i*8, - wb_data, 2); - } + bnx2x_init_wr_wb(bp, reg + i*8, wb_data, 2); } } @@ -873,7 +875,12 @@ static void bnx2x_qm_init_ptr_table(struct bnx2x *bp, int qm_cid_count, case INITOP_INIT: /* set in the init-value array */ case INITOP_SET: - bnx2x_qm_set_ptr_table(bp, qm_cid_count); + bnx2x_qm_set_ptr_table(bp, qm_cid_count, + QM_REG_BASEADDR, QM_REG_PTRTBL); + if (CHIP_IS_E1H(bp)) + bnx2x_qm_set_ptr_table(bp, qm_cid_count, + QM_REG_BASEADDR_EXT_A, + QM_REG_PTRTBL_EXT_A); break; case INITOP_CLEAR: break; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 4df9505b67b..2102ad593c1 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -1,4 +1,4 @@ -/* Copyright 2008-2011 Broadcom Corporation +/* Copyright 2008-2012 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you @@ -2502,7 +2502,7 @@ static void bnx2x_update_pfc_nig(struct link_params *params, struct bnx2x_nig_brb_pfc_port_params *nig_params) { u32 xcm_mask = 0, ppp_enable = 0, pause_enable = 0, llfc_out_en = 0; - u32 llfc_enable = 0, xcm0_out_en = 0, p0_hwpfc_enable = 0; + u32 llfc_enable = 0, xcm_out_en = 0, hwpfc_enable = 0; u32 pkt_priority_to_cos = 0; struct bnx2x *bp = params->bp; u8 port = params->port; @@ -2516,9 +2516,8 @@ static void bnx2x_update_pfc_nig(struct link_params *params, * MAC control frames (that are not pause packets) * will be forwarded to the XCM. */ - xcm_mask = REG_RD(bp, - port ? NIG_REG_LLH1_XCM_MASK : - NIG_REG_LLH0_XCM_MASK); + xcm_mask = REG_RD(bp, port ? NIG_REG_LLH1_XCM_MASK : + NIG_REG_LLH0_XCM_MASK); /* * nig params will override non PFC params, since it's possible to * do transition from PFC to SAFC @@ -2533,8 +2532,8 @@ static void bnx2x_update_pfc_nig(struct link_params *params, ppp_enable = 1; xcm_mask &= ~(port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); - xcm0_out_en = 0; - p0_hwpfc_enable = 1; + xcm_out_en = 0; + hwpfc_enable = 1; } else { if (nig_params) { llfc_out_en = nig_params->llfc_out_en; @@ -2545,7 +2544,7 @@ static void bnx2x_update_pfc_nig(struct link_params *params, xcm_mask |= (port ? NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN : NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN); - xcm0_out_en = 1; + xcm_out_en = 1; } if (CHIP_IS_E3(bp)) @@ -2564,13 +2563,16 @@ static void bnx2x_update_pfc_nig(struct link_params *params, REG_WR(bp, port ? NIG_REG_LLH1_XCM_MASK : NIG_REG_LLH0_XCM_MASK, xcm_mask); - REG_WR(bp, NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7); + REG_WR(bp, port ? NIG_REG_LLFC_EGRESS_SRC_ENABLE_1 : + NIG_REG_LLFC_EGRESS_SRC_ENABLE_0, 0x7); /* output enable for RX_XCM # IF */ - REG_WR(bp, NIG_REG_XCM0_OUT_EN, xcm0_out_en); + REG_WR(bp, port ? NIG_REG_XCM1_OUT_EN : + NIG_REG_XCM0_OUT_EN, xcm_out_en); /* HW PFC TX enable */ - REG_WR(bp, NIG_REG_P0_HWPFC_ENABLE, p0_hwpfc_enable); + REG_WR(bp, port ? NIG_REG_P1_HWPFC_ENABLE : + NIG_REG_P0_HWPFC_ENABLE, hwpfc_enable); if (nig_params) { u8 i = 0; @@ -3761,7 +3763,15 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, /* Advertise pause */ bnx2x_ext_phy_set_pause(params, phy, vars); - vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + /* + * Set KR Autoneg Work-Around flag for Warpcore version older than D108 + */ + bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, + MDIO_WC_REG_UC_INFO_B1_VERSION, &val16); + if (val16 < 0xd108) { + DP(NETIF_MSG_LINK, "Enable AN KR work-around\n"); + vars->rx_tx_asic_rst = MAX_KR_LINK_RETRY; + } bnx2x_cl45_read(bp, phy, MDIO_WC_DEVAD, MDIO_WC_REG_DIGITAL5_MISC7, &val16); @@ -9266,62 +9276,68 @@ static void bnx2x_8727_link_reset(struct bnx2x_phy *phy, /* BCM8481/BCM84823/BCM84833 PHY SECTION */ /******************************************************************/ static void bnx2x_save_848xx_spirom_version(struct bnx2x_phy *phy, - struct link_params *params) + struct bnx2x *bp, + u8 port) { u16 val, fw_ver1, fw_ver2, cnt; - u8 port; - struct bnx2x *bp = params->bp; - port = params->port; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { + bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, 0x400f, &fw_ver1); + bnx2x_save_spirom_version(bp, port, + ((fw_ver1 & 0xf000)>>5) | (fw_ver1 & 0x7f), + phy->ver_addr); + } else { + /* For 32-bit registers in 848xx, access via MDIO2ARM i/f. */ + /* (1) set reg 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009); + + for (cnt = 0; cnt < 100; cnt++) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); + if (val & 1) + break; + udelay(5); + } + if (cnt == 100) { + DP(NETIF_MSG_LINK, "Unable to read 848xx " + "phy fw version(1)\n"); + bnx2x_save_spirom_version(bp, port, 0, + phy->ver_addr); + return; + } - /* For the 32 bits registers in 848xx, access via MDIO2ARM interface.*/ - /* (1) set register 0xc200_0014(SPI_BRIDGE_CTRL_2) to 0x03000000 */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0014); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81B, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81C, 0x0300); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x0009); - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); - if (val & 1) - break; - udelay(5); - } - if (cnt == 100) { - DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(1)\n"); - bnx2x_save_spirom_version(bp, port, 0, - phy->ver_addr); - return; - } + /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); + bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A); + for (cnt = 0; cnt < 100; cnt++) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); + if (val & 1) + break; + udelay(5); + } + if (cnt == 100) { + DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw " + "version(2)\n"); + bnx2x_save_spirom_version(bp, port, 0, + phy->ver_addr); + return; + } + /* lower 16 bits of the register SPI_FW_STATUS */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1); + /* upper 16 bits of register SPI_FW_STATUS */ + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2); - /* 2) read register 0xc200_0000 (SPI_FW_STATUS) */ - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA819, 0x0000); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA81A, 0xc200); - bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, 0xA817, 0x000A); - for (cnt = 0; cnt < 100; cnt++) { - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA818, &val); - if (val & 1) - break; - udelay(5); - } - if (cnt == 100) { - DP(NETIF_MSG_LINK, "Unable to read 848xx phy fw version(2)\n"); - bnx2x_save_spirom_version(bp, port, 0, + bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1, phy->ver_addr); - return; } - /* lower 16 bits of the register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81B, &fw_ver1); - /* upper 16 bits of register SPI_FW_STATUS */ - bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, 0xA81C, &fw_ver2); - - bnx2x_save_spirom_version(bp, port, (fw_ver2<<16) | fw_ver1, - phy->ver_addr); } - static void bnx2x_848xx_set_led(struct bnx2x *bp, struct bnx2x_phy *phy) { @@ -9392,10 +9408,13 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, u16 tmp_req_line_speed; tmp_req_line_speed = phy->req_line_speed; - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { if (phy->req_line_speed == SPEED_10000) phy->req_line_speed = SPEED_AUTO_NEG; - + } else { + /* Save spirom version */ + bnx2x_save_848xx_spirom_version(phy, bp, params->port); + } /* * This phy uses the NIG latch mechanism since link indication * arrives through its LED4 and not via its LASI signal, so we @@ -9443,13 +9462,10 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, an_1000_val); /* set 100 speed advertisement */ - if (((phy->req_line_speed == SPEED_AUTO_NEG) && + if ((phy->req_line_speed == SPEED_AUTO_NEG) && (phy->speed_cap_mask & (PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL | - PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF)) && - (phy->supported & - (SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full)))) { + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF))) { an_10_100_val |= (1<<7); /* Enable autoneg and restart autoneg for legacy speeds */ autoneg_val |= (1<<9 | 1<<12); @@ -9539,9 +9555,6 @@ static int bnx2x_848xx_cmn_config_init(struct bnx2x_phy *phy, MDIO_AN_REG_8481_10GBASE_T_AN_CTRL, 1); - /* Save spirom version */ - bnx2x_save_848xx_spirom_version(phy, params); - phy->req_line_speed = tmp_req_line_speed; return 0; @@ -9749,17 +9762,7 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, /* Wait for GPHY to come out of reset */ msleep(50); - if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { - /* Bring PHY out of super isolate mode */ - bnx2x_cl45_read(bp, phy, - MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val); - val &= ~MDIO_84833_SUPER_ISOLATE; - bnx2x_cl45_write(bp, phy, - MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_XGPHY_STRAP1, val); - bnx2x_84833_pair_swap_cfg(phy, params, vars); - } else { + if (phy->type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { /* * BCM84823 requires that XGXS links up first @ 10G for normal * behavior. @@ -9816,24 +9819,23 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, DP(NETIF_MSG_LINK, "Multi_phy config = 0x%x, Media control = 0x%x\n", params->multi_phy_config, val); - /* AutogrEEEn */ - if (params->feature_config_flags & - FEATURE_CONFIG_AUTOGREEEN_ENABLED) - cmd_args[0] = 0x2; - else - cmd_args[0] = 0x0; + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { + bnx2x_84833_pair_swap_cfg(phy, params, vars); - cmd_args[1] = 0x0; - cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1; - cmd_args[3] = PHY84833_CONSTANT_LATENCY; - rc = bnx2x_84833_cmd_hdlr(phy, params, - PHY84833_CMD_SET_EEE_MODE, cmd_args); - if (rc != 0) - DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n"); + /* Keep AutogrEEEn disabled. */ + cmd_args[0] = 0x0; + cmd_args[1] = 0x0; + cmd_args[2] = PHY84833_CONSTANT_LATENCY + 1; + cmd_args[3] = PHY84833_CONSTANT_LATENCY; + rc = bnx2x_84833_cmd_hdlr(phy, params, + PHY84833_CMD_SET_EEE_MODE, cmd_args); + if (rc != 0) + DP(NETIF_MSG_LINK, "Cfg AutogrEEEn failed.\n"); + } if (initialize) rc = bnx2x_848xx_cmn_config_init(phy, params, vars); else - bnx2x_save_848xx_spirom_version(phy, params); + bnx2x_save_848xx_spirom_version(phy, bp, params->port); /* 84833 PHY has a better feature and doesn't need to support this. */ if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823) { cms_enable = REG_RD(bp, params->shmem_base + @@ -9851,6 +9853,16 @@ static int bnx2x_848x3_config_init(struct bnx2x_phy *phy, MDIO_CTL_REG_84823_USER_CTRL_REG, val); } + if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) { + /* Bring PHY out of super isolate mode as the final step. */ + bnx2x_cl45_read(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val); + val &= ~MDIO_84833_SUPER_ISOLATE; + bnx2x_cl45_write(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, val); + } return rc; } @@ -9988,10 +10000,11 @@ static void bnx2x_848x3_link_reset(struct bnx2x_phy *phy, } else { bnx2x_cl45_read(bp, phy, MDIO_CTL_DEVAD, - 0x400f, &val16); + MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val16); + val16 |= MDIO_84833_SUPER_ISOLATE; bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_CTRL, 0x800); + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, val16); } } @@ -11516,6 +11529,19 @@ static int bnx2x_populate_ext_phy(struct bnx2x *bp, } phy->mdio_ctrl = bnx2x_get_emac_base(bp, mdc_mdio_access, port); + if ((phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833) && + (phy->ver_addr)) { + /* + * Remove 100Mb link supported for BCM84833 when phy fw + * version lower than or equal to 1.39 + */ + u32 raw_ver = REG_RD(bp, phy->ver_addr); + if (((raw_ver & 0x7F) <= 39) && + (((raw_ver & 0xF80) >> 7) <= 1)) + phy->supported &= ~(SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full); + } + /* * In case mdc/mdio_access of the external phy is different than the * mdc/mdio access of the XGXS, a HW lock must be taken in each access @@ -12333,55 +12359,69 @@ static int bnx2x_84833_common_init_phy(struct bnx2x *bp, u32 chip_id) { u8 reset_gpios; - struct bnx2x_phy phy; - u32 shmem_base, shmem2_base, cnt; - s8 port = 0; - u16 val; - reset_gpios = bnx2x_84833_get_reset_gpios(bp, shmem_base_path, chip_id); bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_LOW); udelay(10); bnx2x_set_mult_gpio(bp, reset_gpios, MISC_REGISTERS_GPIO_OUTPUT_HIGH); DP(NETIF_MSG_LINK, "84833 reset pulse on pin values 0x%x\n", reset_gpios); - for (port = PORT_MAX - 1; port >= PORT_0; port--) { - /* This PHY is for E2 and E3. */ - shmem_base = shmem_base_path[port]; - shmem2_base = shmem2_base_path[port]; - /* Extract the ext phy address for the port */ - if (bnx2x_populate_phy(bp, phy_index, shmem_base, shmem2_base, - 0, &phy) != - 0) { - DP(NETIF_MSG_LINK, "populate_phy failed\n"); - return -EINVAL; - } + return 0; +} - /* Wait for FW completing its initialization. */ - for (cnt = 0; cnt < 1000; cnt++) { - bnx2x_cl45_read(bp, &phy, +static int bnx2x_84833_pre_init_phy(struct bnx2x *bp, + struct bnx2x_phy *phy) +{ + u16 val, cnt; + /* Wait for FW completing its initialization. */ + for (cnt = 0; cnt < 1500; cnt++) { + bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &val); - if (!(val & (1<<15))) - break; - msleep(1); - } - if (cnt >= 1000) - DP(NETIF_MSG_LINK, - "84833 Cmn reset timeout (%d)\n", port); - - /* Put the port in super isolate mode. */ - bnx2x_cl45_read(bp, &phy, - MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val); - val |= MDIO_84833_SUPER_ISOLATE; - bnx2x_cl45_write(bp, &phy, - MDIO_CTL_DEVAD, - MDIO_84833_TOP_CFG_XGPHY_STRAP1, val); + if (!(val & (1<<15))) + break; + msleep(1); + } + if (cnt >= 1500) { + DP(NETIF_MSG_LINK, "84833 reset timeout\n"); + return -EINVAL; } + /* Put the port in super isolate mode. */ + bnx2x_cl45_read(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, &val); + val |= MDIO_84833_SUPER_ISOLATE; + bnx2x_cl45_write(bp, phy, + MDIO_CTL_DEVAD, + MDIO_84833_TOP_CFG_XGPHY_STRAP1, val); + + /* Save spirom version */ + bnx2x_save_848xx_spirom_version(phy, bp, PORT_0); return 0; } +int bnx2x_pre_init_phy(struct bnx2x *bp, + u32 shmem_base, + u32 shmem2_base, + u32 chip_id) +{ + int rc = 0; + struct bnx2x_phy phy; + bnx2x_set_mdio_clk(bp, chip_id, PORT_0); + if (bnx2x_populate_phy(bp, EXT_PHY1, shmem_base, shmem2_base, + PORT_0, &phy)) { + DP(NETIF_MSG_LINK, "populate_phy failed\n"); + return -EINVAL; + } + switch (phy.type) { + case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84833: + rc = bnx2x_84833_pre_init_phy(bp, &phy); + break; + default: + break; + } + return rc; +} static int bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], u32 shmem2_base_path[], u8 phy_index, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index e02a68a7fb8..9cc7bafb3df 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -1,4 +1,4 @@ -/* Copyright 2008-2011 Broadcom Corporation +/* Copyright 2008-2012 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index ffeaaa95ed9..fea96150539 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -1,6 +1,6 @@ /* bnx2x_main.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -468,7 +468,9 @@ static int bnx2x_issue_dmae_with_comp(struct bnx2x *bp, while ((*wb_comp & ~DMAE_PCI_ERR_FLAG) != DMAE_COMP_VAL) { DP(BNX2X_MSG_OFF, "wb_comp 0x%08x\n", *wb_comp); - if (!cnt) { + if (!cnt || + (bp->recovery_state != BNX2X_RECOVERY_DONE && + bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { BNX2X_ERR("DMAE timeout!\n"); rc = DMAE_TIMEOUT; goto unlock; @@ -498,9 +500,13 @@ void bnx2x_write_dmae(struct bnx2x *bp, dma_addr_t dma_addr, u32 dst_addr, if (!bp->dmae_ready) { u32 *data = bnx2x_sp(bp, wb_data[0]); - DP(BNX2X_MSG_OFF, "DMAE is not ready (dst_addr %08x len32 %d)" - " using indirect\n", dst_addr, len32); - bnx2x_init_ind_wr(bp, dst_addr, data, len32); + DP(BNX2X_MSG_OFF, + "DMAE is not ready (dst_addr %08x len32 %d) using indirect\n", + dst_addr, len32); + if (CHIP_IS_E1(bp)) + bnx2x_init_ind_wr(bp, dst_addr, data, len32); + else + bnx2x_init_str_wr(bp, dst_addr, data, len32); return; } @@ -528,10 +534,16 @@ void bnx2x_read_dmae(struct bnx2x *bp, u32 src_addr, u32 len32) u32 *data = bnx2x_sp(bp, wb_data[0]); int i; - DP(BNX2X_MSG_OFF, "DMAE is not ready (src_addr %08x len32 %d)" - " using indirect\n", src_addr, len32); - for (i = 0; i < len32; i++) - data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4); + if (CHIP_IS_E1(bp)) { + DP(BNX2X_MSG_OFF, + "DMAE is not ready (src_addr %08x len32 %d) using indirect\n", + src_addr, len32); + for (i = 0; i < len32; i++) + data[i] = bnx2x_reg_rd_ind(bp, src_addr + i*4); + } else + for (i = 0; i < len32; i++) + data[i] = REG_RD(bp, src_addr + i*4); + return; } @@ -772,6 +784,7 @@ void bnx2x_panic_dump(struct bnx2x *bp) #endif bp->stats_state = STATS_STATE_DISABLED; + bp->eth_stats.unrecoverable_error++; DP(BNX2X_MSG_STATS, "stats_state - DISABLED\n"); BNX2X_ERR("begin crash dump -----------------\n"); @@ -941,7 +954,7 @@ void bnx2x_panic_dump(struct bnx2x *bp) struct sw_rx_bd *sw_bd = &fp->rx_buf_ring[j]; BNX2X_ERR("fp%d: rx_bd[%x]=[%x:%x] sw_bd=[%p]\n", - i, j, rx_bd[1], rx_bd[0], sw_bd->skb); + i, j, rx_bd[1], rx_bd[0], sw_bd->data); } start = RX_SGE(fp->rx_sge_prod); @@ -1007,8 +1020,8 @@ void bnx2x_panic_dump(struct bnx2x *bp) * initialization. */ #define FLR_WAIT_USEC 10000 /* 10 miliseconds */ -#define FLR_WAIT_INTERAVAL 50 /* usec */ -#define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERAVAL) /* 200 */ +#define FLR_WAIT_INTERVAL 50 /* usec */ +#define FLR_POLL_CNT (FLR_WAIT_USEC/FLR_WAIT_INTERVAL) /* 200 */ struct pbf_pN_buf_regs { int pN; @@ -1041,7 +1054,7 @@ static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp, while ((crd != init_crd) && ((u32)SUB_S32(crd_freed, crd_freed_start) < (init_crd - crd_start))) { if (cur_cnt--) { - udelay(FLR_WAIT_INTERAVAL); + udelay(FLR_WAIT_INTERVAL); crd = REG_RD(bp, regs->crd); crd_freed = REG_RD(bp, regs->crd_freed); } else { @@ -1055,7 +1068,7 @@ static void bnx2x_pbf_pN_buf_flushed(struct bnx2x *bp, } } DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF tx buffer[%d]\n", - poll_count-cur_cnt, FLR_WAIT_INTERAVAL, regs->pN); + poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); } static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp, @@ -1073,7 +1086,7 @@ static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp, while (occup && ((u32)SUB_S32(freed, freed_start) < to_free)) { if (cur_cnt--) { - udelay(FLR_WAIT_INTERAVAL); + udelay(FLR_WAIT_INTERVAL); occup = REG_RD(bp, regs->lines_occup); freed = REG_RD(bp, regs->lines_freed); } else { @@ -1087,7 +1100,7 @@ static void bnx2x_pbf_pN_cmd_flushed(struct bnx2x *bp, } } DP(BNX2X_MSG_SP, "Waited %d*%d usec for PBF cmd queue[%d]\n", - poll_count-cur_cnt, FLR_WAIT_INTERAVAL, regs->pN); + poll_count-cur_cnt, FLR_WAIT_INTERVAL, regs->pN); } static inline u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg, @@ -1097,7 +1110,7 @@ static inline u32 bnx2x_flr_clnup_reg_poll(struct bnx2x *bp, u32 reg, u32 val; while ((val = REG_RD(bp, reg)) != expected && cur_cnt--) - udelay(FLR_WAIT_INTERAVAL); + udelay(FLR_WAIT_INTERVAL); return val; } @@ -1210,7 +1223,7 @@ static inline int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, int ret = 0; if (REG_RD(bp, comp_addr)) { - BNX2X_ERR("Cleanup complete is not 0\n"); + BNX2X_ERR("Cleanup complete was not 0 before sending\n"); return 1; } @@ -1219,7 +1232,7 @@ static inline int bnx2x_send_final_clnup(struct bnx2x *bp, u8 clnup_func, op_gen.command |= OP_GEN_AGG_VECT(clnup_func); op_gen.command |= 1 << SDM_OP_GEN_AGG_VECT_IDX_VALID_SHIFT; - DP(BNX2X_MSG_SP, "FW Final cleanup\n"); + DP(BNX2X_MSG_SP, "sending FW Final cleanup\n"); REG_WR(bp, XSDM_REG_OPERATION_GEN, op_gen.command); if (bnx2x_flr_clnup_reg_poll(bp, comp_addr, 1, poll_cnt) != 1) { @@ -1334,6 +1347,7 @@ static int bnx2x_pf_flr_clnup(struct bnx2x *bp) REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); /* Poll HW usage counters */ + DP(BNX2X_MSG_SP, "Polling usage counters\n"); if (bnx2x_poll_hw_usage_counters(bp, poll_cnt)) return -EBUSY; @@ -3713,11 +3727,11 @@ static inline void bnx2x_attn_int_deasserted3(struct bnx2x *bp, u32 attn) */ void bnx2x_set_reset_global(struct bnx2x *bp) { - u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); - + u32 val; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val | BNX2X_GLOBAL_RESET_BIT); - barrier(); - mmiowb(); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); } /* @@ -3727,11 +3741,11 @@ void bnx2x_set_reset_global(struct bnx2x *bp) */ static inline void bnx2x_clear_reset_global(struct bnx2x *bp) { - u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); - + u32 val; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~BNX2X_GLOBAL_RESET_BIT)); - barrier(); - mmiowb(); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); } /* @@ -3754,15 +3768,17 @@ static inline bool bnx2x_reset_is_global(struct bnx2x *bp) */ static inline void bnx2x_set_reset_done(struct bnx2x *bp) { - u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 val; u32 bit = BP_PATH(bp) ? BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); /* Clear the bit */ val &= ~bit; REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); - barrier(); - mmiowb(); + + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); } /* @@ -3772,15 +3788,16 @@ static inline void bnx2x_set_reset_done(struct bnx2x *bp) */ void bnx2x_set_reset_in_progress(struct bnx2x *bp) { - u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 val; u32 bit = BP_PATH(bp) ? BNX2X_PATH1_RST_IN_PROG_BIT : BNX2X_PATH0_RST_IN_PROG_BIT; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); /* Set the bit */ val |= bit; REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); - barrier(); - mmiowb(); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); } /* @@ -3798,25 +3815,28 @@ bool bnx2x_reset_is_done(struct bnx2x *bp, int engine) } /* - * Increment the load counter for the current engine. + * set pf load for the current pf. * * should be run under rtnl lock */ -void bnx2x_inc_load_cnt(struct bnx2x *bp) +void bnx2x_set_pf_load(struct bnx2x *bp) { - u32 val1, val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 val1, val; u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : BNX2X_PATH0_LOAD_CNT_MASK; u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : BNX2X_PATH0_LOAD_CNT_SHIFT; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val); /* get the current counter value */ val1 = (val & mask) >> shift; - /* increment... */ - val1++; + /* set bit of that PF */ + val1 |= (1 << bp->pf_num); /* clear the old value */ val &= ~mask; @@ -3825,34 +3845,35 @@ void bnx2x_inc_load_cnt(struct bnx2x *bp) val |= ((val1 << shift) & mask); REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); - barrier(); - mmiowb(); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); } /** - * bnx2x_dec_load_cnt - decrement the load counter + * bnx2x_clear_pf_load - clear pf load mark * * @bp: driver handle * * Should be run under rtnl lock. * Decrements the load counter for the current engine. Returns - * the new counter value. + * whether other functions are still loaded */ -u32 bnx2x_dec_load_cnt(struct bnx2x *bp) +bool bnx2x_clear_pf_load(struct bnx2x *bp) { - u32 val1, val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 val1, val; u32 mask = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : BNX2X_PATH0_LOAD_CNT_MASK; u32 shift = BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_SHIFT : BNX2X_PATH0_LOAD_CNT_SHIFT; + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); DP(NETIF_MSG_HW, "Old GEN_REG_VAL=0x%08x\n", val); /* get the current counter value */ val1 = (val & mask) >> shift; - /* decrement... */ - val1--; + /* clear bit of that PF */ + val1 &= ~(1 << bp->pf_num); /* clear the old value */ val &= ~mask; @@ -3861,18 +3882,16 @@ u32 bnx2x_dec_load_cnt(struct bnx2x *bp) val |= ((val1 << shift) & mask); REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val); - barrier(); - mmiowb(); - - return val1; + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + return val1 != 0; } /* - * Read the load counter for the current engine. + * Read the load status for the current engine. * * should be run under rtnl lock */ -static inline u32 bnx2x_get_load_cnt(struct bnx2x *bp, int engine) +static inline bool bnx2x_get_load_status(struct bnx2x *bp, int engine) { u32 mask = (engine ? BNX2X_PATH1_LOAD_CNT_MASK : BNX2X_PATH0_LOAD_CNT_MASK); @@ -3884,23 +3903,23 @@ static inline u32 bnx2x_get_load_cnt(struct bnx2x *bp, int engine) val = (val & mask) >> shift; - DP(NETIF_MSG_HW, "load_cnt for engine %d = %d\n", engine, val); + DP(NETIF_MSG_HW, "load mask for engine %d = 0x%x\n", engine, val); - return val; + return val != 0; } /* - * Reset the load counter for the current engine. - * - * should be run under rtnl lock + * Reset the load status for the current engine. */ -static inline void bnx2x_clear_load_cnt(struct bnx2x *bp) +static inline void bnx2x_clear_load_status(struct bnx2x *bp) { - u32 val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); + u32 val; u32 mask = (BP_PATH(bp) ? BNX2X_PATH1_LOAD_CNT_MASK : - BNX2X_PATH0_LOAD_CNT_MASK); - + BNX2X_PATH0_LOAD_CNT_MASK); + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); + val = REG_RD(bp, BNX2X_RECOVERY_GLOB_REG); REG_WR(bp, BNX2X_RECOVERY_GLOB_REG, val & (~mask)); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RECOVERY_REG); } static inline void _print_next_block(int idx, const char *blk) @@ -5423,6 +5442,7 @@ static void bnx2x_init_eth_fp(struct bnx2x *bp, int fp_idx) /* init shortcut */ fp->ustorm_rx_prods_offset = bnx2x_rx_ustorm_prods_offset(fp); + /* Setup SB indicies */ fp->rx_cons_sb = BNX2X_RX_SB_INDEX; @@ -6687,13 +6707,16 @@ static int bnx2x_init_hw_func(struct bnx2x *bp) u16 cdu_ilt_start; u32 addr, val; u32 main_mem_base, main_mem_size, main_mem_prty_clr; - int i, main_mem_width; + int i, main_mem_width, rc; DP(BNX2X_MSG_MCP, "starting func init func %d\n", func); /* FLR cleanup - hmmm */ - if (!CHIP_IS_E1x(bp)) - bnx2x_pf_flr_clnup(bp); + if (!CHIP_IS_E1x(bp)) { + rc = bnx2x_pf_flr_clnup(bp); + if (rc) + return rc; + } /* set MSI reconfigure capability */ if (bp->common.int_block == INT_BLOCK_HC) { @@ -8458,13 +8481,38 @@ int bnx2x_leader_reset(struct bnx2x *bp) { int rc = 0; bool global = bnx2x_reset_is_global(bp); + u32 load_code; + + /* if not going to reset MCP - load "fake" driver to reset HW while + * driver is owner of the HW + */ + if (!global && !BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ, 0); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset; + } + if ((load_code != FW_MSG_CODE_DRV_LOAD_COMMON_CHIP) && + (load_code != FW_MSG_CODE_DRV_LOAD_COMMON)) { + BNX2X_ERR("MCP unexpected resp, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset2; + } + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_DONE, 0); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EAGAIN; + goto exit_leader_reset2; + } + } /* Try to recover after the failure */ if (bnx2x_process_kill(bp, global)) { netdev_err(bp->dev, "Something bad had happen on engine %d! " "Aii!\n", BP_PATH(bp)); rc = -EAGAIN; - goto exit_leader_reset; + goto exit_leader_reset2; } /* @@ -8475,6 +8523,12 @@ int bnx2x_leader_reset(struct bnx2x *bp) if (global) bnx2x_clear_reset_global(bp); +exit_leader_reset2: + /* unload "fake driver" if it was loaded */ + if (!global && !BP_NOMCP(bp)) { + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP, 0); + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE, 0); + } exit_leader_reset: bp->is_leader = 0; bnx2x_release_leader_lock(bp); @@ -8511,13 +8565,16 @@ static inline void bnx2x_recovery_failed(struct bnx2x *bp) static void bnx2x_parity_recover(struct bnx2x *bp) { bool global = false; + u32 error_recovered, error_unrecovered; + bool is_parity; DP(NETIF_MSG_HW, "Handling parity\n"); while (1) { switch (bp->recovery_state) { case BNX2X_RECOVERY_INIT: DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_INIT\n"); - bnx2x_chk_parity_attn(bp, &global, false); + is_parity = bnx2x_chk_parity_attn(bp, &global, false); + WARN_ON(!is_parity); /* Try to get a LEADER_LOCK HW lock */ if (bnx2x_trylock_leader_lock(bp)) { @@ -8541,15 +8598,6 @@ static void bnx2x_parity_recover(struct bnx2x *bp) bp->recovery_state = BNX2X_RECOVERY_WAIT; - /* - * Reset MCP command sequence number and MCP mail box - * sequence as we are going to reset the MCP. - */ - if (global) { - bp->fw_seq = 0; - bp->fw_drv_pulse_wr_seq = 0; - } - /* Ensure "is_leader", MCP command sequence and * "recovery_state" update values are seen on other * CPUs. @@ -8561,10 +8609,10 @@ static void bnx2x_parity_recover(struct bnx2x *bp) DP(NETIF_MSG_HW, "State is BNX2X_RECOVERY_WAIT\n"); if (bp->is_leader) { int other_engine = BP_PATH(bp) ? 0 : 1; - u32 other_load_counter = - bnx2x_get_load_cnt(bp, other_engine); - u32 load_counter = - bnx2x_get_load_cnt(bp, BP_PATH(bp)); + bool other_load_status = + bnx2x_get_load_status(bp, other_engine); + bool load_status = + bnx2x_get_load_status(bp, BP_PATH(bp)); global = bnx2x_reset_is_global(bp); /* @@ -8575,8 +8623,8 @@ static void bnx2x_parity_recover(struct bnx2x *bp) * the the gates will remain closed for that * engine. */ - if (load_counter || - (global && other_load_counter)) { + if (load_status || + (global && other_load_status)) { /* Wait until all other functions get * down. */ @@ -8633,13 +8681,34 @@ static void bnx2x_parity_recover(struct bnx2x *bp) return; } - if (bnx2x_nic_load(bp, LOAD_NORMAL)) - bnx2x_recovery_failed(bp); - else { + error_recovered = + bp->eth_stats.recoverable_error; + error_unrecovered = + bp->eth_stats.unrecoverable_error; + bp->recovery_state = + BNX2X_RECOVERY_NIC_LOADING; + if (bnx2x_nic_load(bp, LOAD_NORMAL)) { + error_unrecovered++; + netdev_err(bp->dev, + "Recovery failed. " + "Power cycle " + "needed\n"); + /* Disconnect this device */ + netif_device_detach(bp->dev); + /* Shut down the power */ + bnx2x_set_power_state( + bp, PCI_D3hot); + smp_mb(); + } else { bp->recovery_state = BNX2X_RECOVERY_DONE; + error_recovered++; smp_mb(); } + bp->eth_stats.recoverable_error = + error_recovered; + bp->eth_stats.unrecoverable_error = + error_unrecovered; return; } @@ -8795,11 +8864,13 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) { u32 val; - /* Check if there is any driver already loaded */ - val = REG_RD(bp, MISC_REG_UNPREPARED); - if (val == 0x1) { + /* possibly another driver is trying to reset the chip */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + + /* check if doorbell queue is reset */ + if (REG_RD(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET) + & MISC_REGISTERS_RESET_REG_1_RST_DORQ) { - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); /* * Check if it is the UNDI driver * UNDI driver initializes CID offset for normal bell to 0x7 @@ -8887,14 +8958,11 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) /* restore our func and fw_seq */ bp->pf_num = orig_pf_num; - bp->fw_seq = - (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); } - - /* now it's safe to release the lock */ - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); } + + /* now it's safe to release the lock */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); } static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) @@ -9915,16 +9983,6 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) bnx2x_get_cnic_info(bp); - /* Get current FW pulse sequence */ - if (!BP_NOMCP(bp)) { - int mb_idx = BP_FW_MB_IDX(bp); - - bp->fw_drv_pulse_wr_seq = - (SHMEM_RD(bp, func_mb[mb_idx].drv_pulse_mb) & - DRV_PULSE_SEQ_MASK); - BNX2X_DEV_INFO("drv_pulse 0x%x\n", bp->fw_drv_pulse_wr_seq); - } - return rc; } @@ -10094,14 +10152,6 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp) if (!BP_NOMCP(bp)) bnx2x_undi_unload(bp); - /* init fw_seq after undi_unload! */ - if (!BP_NOMCP(bp)) { - bp->fw_seq = - (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); - } - if (CHIP_REV_IS_FPGA(bp)) dev_err(&bp->pdev->dev, "FPGA detected\n"); @@ -10183,14 +10233,14 @@ static int bnx2x_open(struct net_device *dev) struct bnx2x *bp = netdev_priv(dev); bool global = false; int other_engine = BP_PATH(bp) ? 0 : 1; - u32 other_load_counter, load_counter; + bool other_load_status, load_status; netif_carrier_off(dev); bnx2x_set_power_state(bp, PCI_D0); - other_load_counter = bnx2x_get_load_cnt(bp, other_engine); - load_counter = bnx2x_get_load_cnt(bp, BP_PATH(bp)); + other_load_status = bnx2x_get_load_status(bp, other_engine); + load_status = bnx2x_get_load_status(bp, BP_PATH(bp)); /* * If parity had happen during the unload, then attentions @@ -10216,8 +10266,8 @@ static int bnx2x_open(struct net_device *dev) * global blocks only the first in the chip should try * to recover. */ - if ((!load_counter && - (!global || !other_load_counter)) && + if ((!load_status && + (!global || !other_load_status)) && bnx2x_trylock_leader_lock(bp) && !bnx2x_leader_reset(bp)) { netdev_info(bp->dev, "Recovered in open\n"); @@ -10536,6 +10586,10 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, { struct bnx2x *bp; int rc; + u32 pci_cfg_dword; + bool chip_is_e1x = (board_type == BCM57710 || + board_type == BCM57711 || + board_type == BCM57711E); SET_NETDEV_DEV(dev, &pdev->dev); bp = netdev_priv(dev); @@ -10543,7 +10597,6 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, bp->dev = dev; bp->pdev = pdev; bp->flags = 0; - bp->pf_num = PCI_FUNC(pdev->devfn); rc = pci_enable_device(pdev); if (rc) { @@ -10610,6 +10663,21 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, goto err_out_release; } + /* In E1/E1H use pci device function given by kernel. + * In E2/E3 read physical function from ME register since these chips + * support Physical Device Assignment where kernel BDF maybe arbitrary + * (depending on hypervisor). + */ + if (chip_is_e1x) + bp->pf_num = PCI_FUNC(pdev->devfn); + else {/* chip is E2/3*/ + pci_read_config_dword(bp->pdev, + PCICFG_ME_REGISTER, &pci_cfg_dword); + bp->pf_num = (u8)((pci_cfg_dword & ME_REG_ABS_PF_NUM) >> + ME_REG_ABS_PF_NUM_SHIFT); + } + DP(BNX2X_MSG_SP, "me reg PF num: %d\n", bp->pf_num); + bnx2x_set_power_state(bp, PCI_D0); /* clean indirect addresses */ @@ -10624,7 +10692,7 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); - if (CHIP_IS_E1x(bp)) { + if (chip_is_e1x) { REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); @@ -10635,13 +10703,11 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, * Enable internal target-read (in case we are probed after PF FLR). * Must be done prior to any BAR read access. Only for 57712 and up */ - if (board_type != BCM57710 && - board_type != BCM57711 && - board_type != BCM57711E) + if (!chip_is_e1x) REG_WR(bp, PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ, 1); /* Reset the load counter */ - bnx2x_clear_load_cnt(bp); + bnx2x_clear_load_status(bp); dev->watchdog_timeo = TX_TIMEOUT; @@ -11294,13 +11360,6 @@ static void bnx2x_eeh_recover(struct bnx2x *bp) if ((val & (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) != (SHR_MEM_VALIDITY_DEV_INFO | SHR_MEM_VALIDITY_MB)) BNX2X_ERR("BAD MCP validity signature\n"); - - if (!BP_NOMCP(bp)) { - bp->fw_seq = - (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); - } } /** @@ -11556,6 +11615,13 @@ static int bnx2x_cnic_sp_queue(struct net_device *dev, return -EIO; #endif + if ((bp->recovery_state != BNX2X_RECOVERY_DONE) && + (bp->recovery_state != BNX2X_RECOVERY_NIC_LOADING)) { + netdev_err(dev, "Handling parity error recovery. Try again " + "later\n"); + return -EAGAIN; + } + spin_lock_bh(&bp->spq_lock); for (i = 0; i < count; i++) { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index 44609de4e5d..c95d9dcac6d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -2176,6 +2176,7 @@ * set to 0x345678021. This is a new register (with 2_) added in E3 B0 to * accommodate the 9 input clients to ETS arbiter. */ #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT2_MSB 0x18684 +#define NIG_REG_P1_HWPFC_ENABLE 0x181d0 #define NIG_REG_P1_MAC_IN_EN 0x185c0 /* [RW 1] Output enable for TX MAC interface */ #define NIG_REG_P1_MAC_OUT_EN 0x185c4 @@ -5730,6 +5731,7 @@ #define MISC_REGISTERS_GPIO_PORT_SHIFT 4 #define MISC_REGISTERS_GPIO_SET_POS 8 #define MISC_REGISTERS_RESET_REG_1_CLEAR 0x588 +#define MISC_REGISTERS_RESET_REG_1_RST_DORQ (0x1<<19) #define MISC_REGISTERS_RESET_REG_1_RST_HC (0x1<<29) #define MISC_REGISTERS_RESET_REG_1_RST_NIG (0x1<<7) #define MISC_REGISTERS_RESET_REG_1_RST_PXP (0x1<<26) @@ -5782,15 +5784,17 @@ #define MISC_REGISTERS_SPIO_OUTPUT_HIGH 1 #define MISC_REGISTERS_SPIO_OUTPUT_LOW 0 #define MISC_REGISTERS_SPIO_SET_POS 8 -#define HW_LOCK_DRV_FLAGS 10 #define HW_LOCK_MAX_RESOURCE_VALUE 31 +#define HW_LOCK_RESOURCE_DRV_FLAGS 10 #define HW_LOCK_RESOURCE_GPIO 1 #define HW_LOCK_RESOURCE_MDIO 0 +#define HW_LOCK_RESOURCE_NVRAM 12 #define HW_LOCK_RESOURCE_PORT0_ATT_MASK 3 #define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8 #define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9 -#define HW_LOCK_RESOURCE_SPIO 2 +#define HW_LOCK_RESOURCE_RECOVERY_REG 11 #define HW_LOCK_RESOURCE_RESET 5 +#define HW_LOCK_RESOURCE_SPIO 2 #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18) @@ -6022,7 +6026,8 @@ #define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP (0x1<<23) #define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE (0x1<<24) #define PCICFG_GRC_ADDRESS 0x78 -#define PCICFG_GRC_DATA 0x80 +#define PCICFG_GRC_DATA 0x80 +#define PCICFG_ME_REGISTER 0x98 #define PCICFG_MSIX_CAP_ID_OFFSET 0xa0 #define PCICFG_MSIX_CONTROL_TABLE_SIZE (0x7ff<<16) #define PCICFG_MSIX_CONTROL_RESERVED (0x7<<27) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c index 5ac616093f9..ac15f747f8d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c @@ -1,6 +1,6 @@ /* bnx2x_sp.c: Broadcom Everest network driver. * - * Copyright 2011 Broadcom Corporation + * Copyright (c) 2011-2012 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you @@ -50,6 +50,7 @@ static inline void bnx2x_exe_queue_init(struct bnx2x *bp, int exe_len, union bnx2x_qable_obj *owner, exe_q_validate validate, + exe_q_remove remove, exe_q_optimize optimize, exe_q_execute exec, exe_q_get get) @@ -66,6 +67,7 @@ static inline void bnx2x_exe_queue_init(struct bnx2x *bp, /* Owner specific callbacks */ o->validate = validate; + o->remove = remove; o->optimize = optimize; o->execute = exec; o->get = get; @@ -1340,6 +1342,35 @@ static int bnx2x_validate_vlan_mac(struct bnx2x *bp, } } +static int bnx2x_remove_vlan_mac(struct bnx2x *bp, + union bnx2x_qable_obj *qo, + struct bnx2x_exeq_elem *elem) +{ + int rc = 0; + + /* If consumption wasn't required, nothing to do */ + if (test_bit(BNX2X_DONT_CONSUME_CAM_CREDIT, + &elem->cmd_data.vlan_mac.vlan_mac_flags)) + return 0; + + switch (elem->cmd_data.vlan_mac.cmd) { + case BNX2X_VLAN_MAC_ADD: + case BNX2X_VLAN_MAC_MOVE: + rc = qo->vlan_mac.put_credit(&qo->vlan_mac); + break; + case BNX2X_VLAN_MAC_DEL: + rc = qo->vlan_mac.get_credit(&qo->vlan_mac); + break; + default: + return -EINVAL; + } + + if (rc != true) + return -EINVAL; + + return 0; +} + /** * bnx2x_wait_vlan_mac - passivly wait for 5 seconds until all work completes. * @@ -1801,8 +1832,15 @@ static int bnx2x_vlan_mac_del_all(struct bnx2x *bp, list_for_each_entry_safe(exeq_pos, exeq_pos_n, &exeq->exe_queue, link) { if (exeq_pos->cmd_data.vlan_mac.vlan_mac_flags == - *vlan_mac_flags) + *vlan_mac_flags) { + rc = exeq->remove(bp, exeq->owner, exeq_pos); + if (rc) { + BNX2X_ERR("Failed to remove command\n"); + spin_unlock_bh(&exeq->lock); + return rc; + } list_del(&exeq_pos->link); + } } spin_unlock_bh(&exeq->lock); @@ -1908,6 +1946,7 @@ void bnx2x_init_mac_obj(struct bnx2x *bp, bnx2x_exe_queue_init(bp, &mac_obj->exe_queue, 1, qable_obj, bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, bnx2x_optimize_vlan_mac, bnx2x_execute_vlan_mac, bnx2x_exeq_get_mac); @@ -1924,6 +1963,7 @@ void bnx2x_init_mac_obj(struct bnx2x *bp, bnx2x_exe_queue_init(bp, &mac_obj->exe_queue, CLASSIFY_RULES_COUNT, qable_obj, bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, bnx2x_optimize_vlan_mac, bnx2x_execute_vlan_mac, bnx2x_exeq_get_mac); @@ -1963,6 +2003,7 @@ void bnx2x_init_vlan_obj(struct bnx2x *bp, bnx2x_exe_queue_init(bp, &vlan_obj->exe_queue, CLASSIFY_RULES_COUNT, qable_obj, bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, bnx2x_optimize_vlan_mac, bnx2x_execute_vlan_mac, bnx2x_exeq_get_vlan); @@ -2009,6 +2050,7 @@ void bnx2x_init_vlan_mac_obj(struct bnx2x *bp, bnx2x_exe_queue_init(bp, &vlan_mac_obj->exe_queue, 1, qable_obj, bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, bnx2x_optimize_vlan_mac, bnx2x_execute_vlan_mac, bnx2x_exeq_get_vlan_mac); @@ -2025,6 +2067,7 @@ void bnx2x_init_vlan_mac_obj(struct bnx2x *bp, &vlan_mac_obj->exe_queue, CLASSIFY_RULES_COUNT, qable_obj, bnx2x_validate_vlan_mac, + bnx2x_remove_vlan_mac, bnx2x_optimize_vlan_mac, bnx2x_execute_vlan_mac, bnx2x_exeq_get_vlan_mac); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h index 992308ff82e..71e039b618a 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h @@ -1,6 +1,6 @@ /* bnx2x_sp.h: Broadcom Everest network driver. * - * Copyright 2011 Broadcom Corporation + * Copyright (c) 2011-2012 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you @@ -161,6 +161,10 @@ typedef int (*exe_q_validate)(struct bnx2x *bp, union bnx2x_qable_obj *o, struct bnx2x_exeq_elem *elem); +typedef int (*exe_q_remove)(struct bnx2x *bp, + union bnx2x_qable_obj *o, + struct bnx2x_exeq_elem *elem); + /** * @return positive is entry was optimized, 0 - if not, negative * in case of an error. @@ -203,11 +207,18 @@ struct bnx2x_exe_queue_obj { */ exe_q_validate validate; + /** + * Called before removing pending commands, cleaning allocated + * resources (e.g., credits from validate) + */ + exe_q_remove remove; /** * This will try to cancel the current pending commands list * considering the new command. * + * Returns the number of optimized commands or a negative error code + * * Must run under exe_queue->lock */ exe_q_optimize optimize; @@ -792,10 +803,10 @@ enum bnx2x_q_type { }; #define BNX2X_PRIMARY_CID_INDEX 0 -#define BNX2X_MULTI_TX_COS_E1X 1 +#define BNX2X_MULTI_TX_COS_E1X 3 /* QM only */ #define BNX2X_MULTI_TX_COS_E2_E3A0 2 #define BNX2X_MULTI_TX_COS_E3B0 3 -#define BNX2X_MULTI_TX_COS BNX2X_MULTI_TX_COS_E3B0 +#define BNX2X_MULTI_TX_COS 3 /* Maximum possible */ struct bnx2x_queue_init_params { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index bc0121ac291..7b9b304b910 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -1,6 +1,6 @@ /* bnx2x_stats.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h index 683deb05310..7e979686cd6 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h @@ -1,6 +1,6 @@ /* bnx2x_stats.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2011 Broadcom Corporation + * Copyright (c) 2007-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -199,6 +199,10 @@ struct bnx2x_eth_stats { u32 pfc_frames_received_lo; u32 pfc_frames_sent_hi; u32 pfc_frames_sent_lo; + + /* Recovery */ + u32 recoverable_error; + u32 unrecoverable_error; }; diff --git a/drivers/net/ethernet/broadcom/cnic.c b/drivers/net/ethernet/broadcom/cnic.c index 4bcb67eedf1..dd3a0a232ea 100644 --- a/drivers/net/ethernet/broadcom/cnic.c +++ b/drivers/net/ethernet/broadcom/cnic.c @@ -1361,7 +1361,7 @@ static int cnic_submit_kwqe_16(struct cnic_dev *dev, u32 cmd, u32 cid, if (ret == 1) return 0; - return -EBUSY; + return ret; } static void cnic_reply_bnx2x_kcqes(struct cnic_dev *dev, int ulp_type, @@ -1849,7 +1849,7 @@ static int cnic_bnx2x_iscsi_ofld1(struct cnic_dev *dev, struct kwqe *wqes[], done: cqes[0] = (struct kcqe *) &kcqe; cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_ISCSI, cqes, 1); - return ret; + return 0; } @@ -1947,7 +1947,7 @@ destroy_reply: cqes[0] = (struct kcqe *) &kcqe; cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_ISCSI, cqes, 1); - return ret; + return 0; } static void cnic_init_storm_conn_bufs(struct cnic_dev *dev, @@ -2513,6 +2513,57 @@ static int cnic_bnx2x_fcoe_fw_destroy(struct cnic_dev *dev, struct kwqe *kwqe) return ret; } +static void cnic_bnx2x_kwqe_err(struct cnic_dev *dev, struct kwqe *kwqe) +{ + struct cnic_local *cp = dev->cnic_priv; + struct kcqe kcqe; + struct kcqe *cqes[1]; + u32 cid; + u32 opcode = KWQE_OPCODE(kwqe->kwqe_op_flag); + u32 layer_code = kwqe->kwqe_op_flag & KWQE_LAYER_MASK; + int ulp_type; + + cid = kwqe->kwqe_info0; + memset(&kcqe, 0, sizeof(kcqe)); + + if (layer_code == KWQE_FLAGS_LAYER_MASK_L5_ISCSI) { + ulp_type = CNIC_ULP_ISCSI; + if (opcode == ISCSI_KWQE_OPCODE_UPDATE_CONN) + cid = kwqe->kwqe_info1; + + kcqe.kcqe_op_flag = (opcode + 0x10) << KCQE_FLAGS_OPCODE_SHIFT; + kcqe.kcqe_op_flag |= KCQE_FLAGS_LAYER_MASK_L5_ISCSI; + kcqe.kcqe_info1 = ISCSI_KCQE_COMPLETION_STATUS_NIC_ERROR; + kcqe.kcqe_info2 = cid; + cnic_get_l5_cid(cp, BNX2X_SW_CID(cid), &kcqe.kcqe_info0); + + } else if (layer_code == KWQE_FLAGS_LAYER_MASK_L4) { + struct l4_kcq *l4kcqe = (struct l4_kcq *) &kcqe; + u32 kcqe_op; + + ulp_type = CNIC_ULP_L4; + if (opcode == L4_KWQE_OPCODE_VALUE_CONNECT1) + kcqe_op = L4_KCQE_OPCODE_VALUE_CONNECT_COMPLETE; + else if (opcode == L4_KWQE_OPCODE_VALUE_RESET) + kcqe_op = L4_KCQE_OPCODE_VALUE_RESET_COMP; + else if (opcode == L4_KWQE_OPCODE_VALUE_CLOSE) + kcqe_op = L4_KCQE_OPCODE_VALUE_CLOSE_COMP; + else + return; + + kcqe.kcqe_op_flag = (kcqe_op << KCQE_FLAGS_OPCODE_SHIFT) | + KCQE_FLAGS_LAYER_MASK_L4; + l4kcqe->status = L4_KCQE_COMPLETION_STATUS_NIC_ERROR; + l4kcqe->cid = cid; + cnic_get_l5_cid(cp, BNX2X_SW_CID(cid), &l4kcqe->conn_id); + } else { + return; + } + + cqes[0] = (struct kcqe *) &kcqe; + cnic_reply_bnx2x_kcqes(dev, ulp_type, cqes, 1); +} + static int cnic_submit_bnx2x_iscsi_kwqes(struct cnic_dev *dev, struct kwqe *wqes[], u32 num_wqes) { @@ -2570,9 +2621,17 @@ static int cnic_submit_bnx2x_iscsi_kwqes(struct cnic_dev *dev, opcode); break; } - if (ret < 0) + if (ret < 0) { netdev_err(dev->netdev, "KWQE(0x%x) failed\n", opcode); + + /* Possibly bnx2x parity error, send completion + * to ulp drivers with error code to speed up + * cleanup and reset recovery. + */ + if (ret == -EIO || ret == -EAGAIN) + cnic_bnx2x_kwqe_err(dev, kwqe); + } i += work; } return 0; @@ -3849,6 +3908,9 @@ static void cnic_cm_process_kcqe(struct cnic_dev *dev, struct kcqe *kcqe) case L4_KCQE_OPCODE_VALUE_RESET_COMP: case L5CM_RAMROD_CMD_ID_SEARCHER_DELETE: case L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD: + if (l4kcqe->status == L4_KCQE_COMPLETION_STATUS_NIC_ERROR) + set_bit(SK_F_HW_ERR, &csk->flags); + cp->close_conn(csk, opcode); break; @@ -3976,7 +4038,9 @@ static void cnic_close_bnx2x_conn(struct cnic_sock *csk, u32 opcode) case L4_KCQE_OPCODE_VALUE_CLOSE_COMP: case L4_KCQE_OPCODE_VALUE_RESET_COMP: if (cnic_ready_to_close(csk, opcode)) { - if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags)) + if (test_bit(SK_F_HW_ERR, &csk->flags)) + close_complete = 1; + else if (test_bit(SK_F_PG_OFFLD_COMPLETE, &csk->flags)) cmd = L5CM_RAMROD_CMD_ID_SEARCHER_DELETE; else close_complete = 1; @@ -4869,6 +4933,7 @@ static int cnic_start_bnx2x_hw(struct cnic_dev *dev) int func = CNIC_FUNC(cp), ret; u32 pfid; + dev->stats_addr = ethdev->addr_drv_info_to_mcp; cp->port_mode = CHIP_PORT_MODE_NONE; if (BNX2X_CHIP_IS_E2_PLUS(cp->chip_id)) { diff --git a/drivers/net/ethernet/broadcom/cnic_defs.h b/drivers/net/ethernet/broadcom/cnic_defs.h index 239de898f07..86936f6b6db 100644 --- a/drivers/net/ethernet/broadcom/cnic_defs.h +++ b/drivers/net/ethernet/broadcom/cnic_defs.h @@ -85,6 +85,7 @@ /* KCQ (kernel completion queue) completion status */ #define L4_KCQE_COMPLETION_STATUS_SUCCESS (0) +#define L4_KCQE_COMPLETION_STATUS_NIC_ERROR (4) #define L4_KCQE_COMPLETION_STATUS_TIMEOUT (0x93) #define L4_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAIL (0x83) diff --git a/drivers/net/ethernet/broadcom/cnic_if.h b/drivers/net/ethernet/broadcom/cnic_if.h index d1f6456d22b..1517763d4e5 100644 --- a/drivers/net/ethernet/broadcom/cnic_if.h +++ b/drivers/net/ethernet/broadcom/cnic_if.h @@ -1,6 +1,6 @@ /* cnic_if.h: Broadcom CNIC core network driver. * - * Copyright (c) 2006-2011 Broadcom Corporation + * Copyright (c) 2006-2012 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -12,8 +12,8 @@ #ifndef CNIC_IF_H #define CNIC_IF_H -#define CNIC_MODULE_VERSION "2.5.7" -#define CNIC_MODULE_RELDATE "July 20, 2011" +#define CNIC_MODULE_VERSION "2.5.8" +#define CNIC_MODULE_RELDATE "Jan 3, 2012" #define CNIC_ULP_RDMA 0 #define CNIC_ULP_ISCSI 1 @@ -261,6 +261,7 @@ struct cnic_sock { #define SK_F_CONNECT_START 4 #define SK_F_IPV6 5 #define SK_F_CLOSING 7 +#define SK_F_HW_ERR 8 atomic_t ref_count; u32 state; diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c index 8fa7abc53ec..084904ceaa3 100644 --- a/drivers/net/ethernet/broadcom/sb1250-mac.c +++ b/drivers/net/ethernet/broadcom/sb1250-mac.c @@ -2259,7 +2259,8 @@ static int sbmac_init(struct platform_device *pldev, long long base) } sc->mii_bus->name = sbmac_mdio_string; - snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%x", idx); + snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", + pldev->name, idx); sc->mii_bus->priv = sc; sc->mii_bus->read = sbmac_mii_read; sc->mii_bus->write = sbmac_mii_write; diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 076e02a415a..a1f2e0fed78 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6667,14 +6667,9 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) iph = ip_hdr(skb); tcp_opt_len = tcp_optlen(skb); - if (skb_is_gso_v6(skb)) { - hdr_len = skb_headlen(skb) - ETH_HLEN; - } else { - u32 ip_tcp_len; - - ip_tcp_len = ip_hdrlen(skb) + sizeof(struct tcphdr); - hdr_len = ip_tcp_len + tcp_opt_len; + hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb) - ETH_HLEN; + if (!skb_is_gso_v6(skb)) { iph->check = 0; iph->tot_len = htons(mss + hdr_len); } @@ -8846,9 +8841,11 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy) tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl); udelay(100); - if (tg3_flag(tp, USING_MSIX) && tp->irq_cnt > 1) { + if (tg3_flag(tp, USING_MSIX)) { val = tr32(MSGINT_MODE); - val |= MSGINT_MODE_MULTIVEC_EN | MSGINT_MODE_ENABLE; + val |= MSGINT_MODE_ENABLE; + if (tp->irq_cnt > 1) + val |= MSGINT_MODE_MULTIVEC_EN; if (!tg3_flag(tp, 1SHOT_MSI)) val |= MSGINT_MODE_ONE_SHOT_DISABLE; tw32(MSGINT_MODE, val); @@ -9548,19 +9545,18 @@ static int tg3_request_firmware(struct tg3 *tp) static bool tg3_enable_msix(struct tg3 *tp) { - int i, rc, cpus = num_online_cpus(); + int i, rc; struct msix_entry msix_ent[tp->irq_max]; - if (cpus == 1) - /* Just fallback to the simpler MSI mode. */ - return false; - - /* - * We want as many rx rings enabled as there are cpus. - * The first MSIX vector only deals with link interrupts, etc, - * so we add one to the number of vectors we are requesting. - */ - tp->irq_cnt = min_t(unsigned, cpus + 1, tp->irq_max); + tp->irq_cnt = num_online_cpus(); + if (tp->irq_cnt > 1) { + /* We want as many rx rings enabled as there are cpus. + * In multiqueue MSI-X mode, the first MSI-X vector + * only deals with link interrupts, etc, so we add + * one to the number of vectors we are requesting. + */ + tp->irq_cnt = min_t(unsigned, tp->irq_cnt + 1, tp->irq_max); + } for (i = 0; i < tp->irq_max; i++) { msix_ent[i].entry = i; |