diff options
Diffstat (limited to 'drivers/net/ethernet/i825xx/3c507.c')
| -rw-r--r-- | drivers/net/ethernet/i825xx/3c507.c | 938 |
1 files changed, 0 insertions, 938 deletions
diff --git a/drivers/net/ethernet/i825xx/3c507.c b/drivers/net/ethernet/i825xx/3c507.c deleted file mode 100644 index e8984b05990..00000000000 --- a/drivers/net/ethernet/i825xx/3c507.c +++ /dev/null @@ -1,938 +0,0 @@ -/* 3c507.c: An EtherLink16 device driver for Linux. */ -/* - Written 1993,1994 by Donald Becker. - - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - - Thanks go to jennings@Montrouge.SMR.slb.com ( Patrick Jennings) - and jrs@world.std.com (Rick Sladkey) for testing and bugfixes. - Mark Salazar <leslie@access.digex.net> made the changes for cards with - only 16K packet buffers. - - Things remaining to do: - Verify that the tx and rx buffers don't have fencepost errors. - Move the theory of operation and memory map documentation. - The statistics need to be updated correctly. -*/ - -#define DRV_NAME "3c507" -#define DRV_VERSION "1.10a" -#define DRV_RELDATE "11/17/2001" - -static const char version[] = - DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Donald Becker (becker@scyld.com)\n"; - -/* - Sources: - This driver wouldn't have been written with the availability of the - Crynwr driver source code. It provided a known-working implementation - that filled in the gaping holes of the Intel documentation. Three cheers - for Russ Nelson. - - Intel Microcommunications Databook, Vol. 1, 1990. It provides just enough - info that the casual reader might think that it documents the i82586 :-<. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/string.h> -#include <linux/spinlock.h> -#include <linux/ethtool.h> -#include <linux/errno.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_ether.h> -#include <linux/skbuff.h> -#include <linux/init.h> -#include <linux/bitops.h> - -#include <asm/dma.h> -#include <asm/io.h> -#include <asm/uaccess.h> - -/* use 0 for production, 1 for verification, 2..7 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; -#define debug net_debug - - -/* - Details of the i82586. - - You'll really need the databook to understand the details of this part, - but the outline is that the i82586 has two separate processing units. - Both are started from a list of three configuration tables, of which only - the last, the System Control Block (SCB), is used after reset-time. The SCB - has the following fields: - Status word - Command word - Tx/Command block addr. - Rx block addr. - The command word accepts the following controls for the Tx and Rx units: - */ - -#define CUC_START 0x0100 -#define CUC_RESUME 0x0200 -#define CUC_SUSPEND 0x0300 -#define RX_START 0x0010 -#define RX_RESUME 0x0020 -#define RX_SUSPEND 0x0030 - -/* The Rx unit uses a list of frame descriptors and a list of data buffer - descriptors. We use full-sized (1518 byte) data buffers, so there is - a one-to-one pairing of frame descriptors to buffer descriptors. - - The Tx ("command") unit executes a list of commands that look like: - Status word Written by the 82586 when the command is done. - Command word Command in lower 3 bits, post-command action in upper 3 - Link word The address of the next command. - Parameters (as needed). - - Some definitions related to the Command Word are: - */ -#define CMD_EOL 0x8000 /* The last command of the list, stop. */ -#define CMD_SUSP 0x4000 /* Suspend after doing cmd. */ -#define CMD_INTR 0x2000 /* Interrupt after doing cmd. */ - -enum commands { - CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3, - CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7}; - -/* Information that need to be kept for each board. */ -struct net_local { - int last_restart; - ushort rx_head; - ushort rx_tail; - ushort tx_head; - ushort tx_cmd_link; - ushort tx_reap; - ushort tx_pkts_in_ring; - spinlock_t lock; - void __iomem *base; -}; - -/* - Details of the EtherLink16 Implementation - The 3c507 is a generic shared-memory i82586 implementation. - The host can map 16K, 32K, 48K, or 64K of the 64K memory into - 0x0[CD][08]0000, or all 64K into 0xF[02468]0000. - */ - -/* Offsets from the base I/O address. */ -#define SA_DATA 0 /* Station address data, or 3Com signature. */ -#define MISC_CTRL 6 /* Switch the SA_DATA banks, and bus config bits. */ -#define RESET_IRQ 10 /* Reset the latched IRQ line. */ -#define SIGNAL_CA 11 /* Frob the 82586 Channel Attention line. */ -#define ROM_CONFIG 13 -#define MEM_CONFIG 14 -#define IRQ_CONFIG 15 -#define EL16_IO_EXTENT 16 - -/* The ID port is used at boot-time to locate the ethercard. */ -#define ID_PORT 0x100 - -/* Offsets to registers in the mailbox (SCB). */ -#define iSCB_STATUS 0x8 -#define iSCB_CMD 0xA -#define iSCB_CBL 0xC /* Command BLock offset. */ -#define iSCB_RFA 0xE /* Rx Frame Area offset. */ - -/* Since the 3c507 maps the shared memory window so that the last byte is - at 82586 address FFFF, the first byte is at 82586 address 0, 16K, 32K, or - 48K corresponding to window sizes of 64K, 48K, 32K and 16K respectively. - We can account for this be setting the 'SBC Base' entry in the ISCP table - below for all the 16 bit offset addresses, and also adding the 'SCB Base' - value to all 24 bit physical addresses (in the SCP table and the TX and RX - Buffer Descriptors). - -Mark - */ -#define SCB_BASE ((unsigned)64*1024 - (dev->mem_end - dev->mem_start)) - -/* - What follows in 'init_words[]' is the "program" that is downloaded to the - 82586 memory. It's mostly tables and command blocks, and starts at the - reset address 0xfffff6. This is designed to be similar to the EtherExpress, - thus the unusual location of the SCB at 0x0008. - - Even with the additional "don't care" values, doing it this way takes less - program space than initializing the individual tables, and I feel it's much - cleaner. - - The databook is particularly useless for the first two structures, I had - to use the Crynwr driver as an example. - - The memory setup is as follows: - */ - -#define CONFIG_CMD 0x0018 -#define SET_SA_CMD 0x0024 -#define SA_OFFSET 0x002A -#define IDLELOOP 0x30 -#define TDR_CMD 0x38 -#define TDR_TIME 0x3C -#define DUMP_CMD 0x40 -#define DIAG_CMD 0x48 -#define SET_MC_CMD 0x4E -#define DUMP_DATA 0x56 /* A 170 byte buffer for dump and Set-MC into. */ - -#define TX_BUF_START 0x0100 -#define NUM_TX_BUFS 5 -#define TX_BUF_SIZE (1518+14+20+16) /* packet+header+TBD */ - -#define RX_BUF_START 0x2000 -#define RX_BUF_SIZE (1518+14+18) /* packet+header+RBD */ -#define RX_BUF_END (dev->mem_end - dev->mem_start) - -#define TX_TIMEOUT (HZ/20) - -/* - That's it: only 86 bytes to set up the beast, including every extra - command available. The 170 byte buffer at DUMP_DATA is shared between the - Dump command (called only by the diagnostic program) and the SetMulticastList - command. - - To complete the memory setup you only have to write the station address at - SA_OFFSET and create the Tx & Rx buffer lists. - - The Tx command chain and buffer list is setup as follows: - A Tx command table, with the data buffer pointing to... - A Tx data buffer descriptor. The packet is in a single buffer, rather than - chaining together several smaller buffers. - A NoOp command, which initially points to itself, - And the packet data. - - A transmit is done by filling in the Tx command table and data buffer, - re-writing the NoOp command, and finally changing the offset of the last - command to point to the current Tx command. When the Tx command is finished, - it jumps to the NoOp, when it loops until the next Tx command changes the - "link offset" in the NoOp. This way the 82586 never has to go through the - slow restart sequence. - - The Rx buffer list is set up in the obvious ring structure. We have enough - memory (and low enough interrupt latency) that we can avoid the complicated - Rx buffer linked lists by alway associating a full-size Rx data buffer with - each Rx data frame. - - I current use four transmit buffers starting at TX_BUF_START (0x0100), and - use the rest of memory, from RX_BUF_START to RX_BUF_END, for Rx buffers. - - */ - -static unsigned short init_words[] = { - /* System Configuration Pointer (SCP). */ - 0x0000, /* Set bus size to 16 bits. */ - 0,0, /* pad words. */ - 0x0000,0x0000, /* ISCP phys addr, set in init_82586_mem(). */ - - /* Intermediate System Configuration Pointer (ISCP). */ - 0x0001, /* Status word that's cleared when init is done. */ - 0x0008,0,0, /* SCB offset, (skip, skip) */ - - /* System Control Block (SCB). */ - 0,0xf000|RX_START|CUC_START, /* SCB status and cmd. */ - CONFIG_CMD, /* Command list pointer, points to Configure. */ - RX_BUF_START, /* Rx block list. */ - 0,0,0,0, /* Error count: CRC, align, buffer, overrun. */ - - /* 0x0018: Configure command. Change to put MAC data with packet. */ - 0, CmdConfigure, /* Status, command. */ - SET_SA_CMD, /* Next command is Set Station Addr. */ - 0x0804, /* "4" bytes of config data, 8 byte FIFO. */ - 0x2e40, /* Magic values, including MAC data location. */ - 0, /* Unused pad word. */ - - /* 0x0024: Setup station address command. */ - 0, CmdSASetup, - SET_MC_CMD, /* Next command. */ - 0xaa00,0xb000,0x0bad, /* Station address (to be filled in) */ - - /* 0x0030: NOP, looping back to itself. Point to first Tx buffer to Tx. */ - 0, CmdNOp, IDLELOOP, 0 /* pad */, - - /* 0x0038: A unused Time-Domain Reflectometer command. */ - 0, CmdTDR, IDLELOOP, 0, - - /* 0x0040: An unused Dump State command. */ - 0, CmdDump, IDLELOOP, DUMP_DATA, - - /* 0x0048: An unused Diagnose command. */ - 0, CmdDiagnose, IDLELOOP, - - /* 0x004E: An empty set-multicast-list command. */ - 0, CmdMulticastList, IDLELOOP, 0, -}; - -/* Index to functions, as function prototypes. */ - -static int el16_probe1(struct net_device *dev, int ioaddr); -static int el16_open(struct net_device *dev); -static netdev_tx_t el16_send_packet(struct sk_buff *skb, - struct net_device *dev); -static irqreturn_t el16_interrupt(int irq, void *dev_id); -static void el16_rx(struct net_device *dev); -static int el16_close(struct net_device *dev); -static void el16_tx_timeout (struct net_device *dev); - -static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad); -static void init_82586_mem(struct net_device *dev); -static const struct ethtool_ops netdev_ethtool_ops; -static void init_rx_bufs(struct net_device *); - -static int io = 0x300; -static int irq; -static int mem_start; - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, (detachable devices only) allocate space for the - device and return success. - */ - -struct net_device * __init el16_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - static const unsigned ports[] = { 0x300, 0x320, 0x340, 0x280, 0}; - const unsigned *port; - int err = -ENODEV; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - mem_start = dev->mem_start & 15; - } - - if (io > 0x1ff) /* Check a single specified location. */ - err = el16_probe1(dev, io); - else if (io != 0) - err = -ENXIO; /* Don't probe at all. */ - else { - for (port = ports; *port; port++) { - err = el16_probe1(dev, *port); - if (!err) - break; - } - } - - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - free_irq(dev->irq, dev); - iounmap(((struct net_local *)netdev_priv(dev))->base); - release_region(dev->base_addr, EL16_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -static const struct net_device_ops netdev_ops = { - .ndo_open = el16_open, - .ndo_stop = el16_close, - .ndo_start_xmit = el16_send_packet, - .ndo_tx_timeout = el16_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init el16_probe1(struct net_device *dev, int ioaddr) -{ - static unsigned char init_ID_done; - int i, irq, irqval, retval; - struct net_local *lp; - - if (init_ID_done == 0) { - ushort lrs_state = 0xff; - /* Send the ID sequence to the ID_PORT to enable the board(s). */ - outb(0x00, ID_PORT); - for(i = 0; i < 255; i++) { - outb(lrs_state, ID_PORT); - lrs_state <<= 1; - if (lrs_state & 0x100) - lrs_state ^= 0xe7; - } - outb(0x00, ID_PORT); - init_ID_done = 1; - } - - if (!request_region(ioaddr, EL16_IO_EXTENT, DRV_NAME)) - return -ENODEV; - - if ((inb(ioaddr) != '*') || (inb(ioaddr + 1) != '3') || - (inb(ioaddr + 2) != 'C') || (inb(ioaddr + 3) != 'O')) { - retval = -ENODEV; - goto out; - } - - pr_info("%s: 3c507 at %#x,", dev->name, ioaddr); - - /* We should make a few more checks here, like the first three octets of - the S.A. for the manufacturer's code. */ - - irq = inb(ioaddr + IRQ_CONFIG) & 0x0f; - - irqval = request_irq(irq, el16_interrupt, 0, DRV_NAME, dev); - if (irqval) { - pr_cont("\n"); - pr_err("3c507: unable to get IRQ %d (irqval=%d).\n", irq, irqval); - retval = -EAGAIN; - goto out; - } - - /* We've committed to using the board, and can start filling in *dev. */ - dev->base_addr = ioaddr; - - outb(0x01, ioaddr + MISC_CTRL); - for (i = 0; i < 6; i++) - dev->dev_addr[i] = inb(ioaddr + i); - pr_cont(" %pM", dev->dev_addr); - - if (mem_start) - net_debug = mem_start & 7; - -#ifdef MEM_BASE - dev->mem_start = MEM_BASE; - dev->mem_end = dev->mem_start + 0x10000; -#else - { - int base; - int size; - char mem_config = inb(ioaddr + MEM_CONFIG); - if (mem_config & 0x20) { - size = 64*1024; - base = 0xf00000 + (mem_config & 0x08 ? 0x080000 - : ((mem_config & 3) << 17)); - } else { - size = ((mem_config & 3) + 1) << 14; - base = 0x0c0000 + ( (mem_config & 0x18) << 12); - } - dev->mem_start = base; - dev->mem_end = base + size; - } -#endif - - dev->if_port = (inb(ioaddr + ROM_CONFIG) & 0x80) ? 1 : 0; - dev->irq = inb(ioaddr + IRQ_CONFIG) & 0x0f; - - pr_cont(", IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->irq, - dev->if_port ? "ex" : "in", dev->mem_start, dev->mem_end-1); - - if (net_debug) - pr_debug("%s", version); - - lp = netdev_priv(dev); - spin_lock_init(&lp->lock); - lp->base = ioremap(dev->mem_start, RX_BUF_END); - if (!lp->base) { - pr_err("3c507: unable to remap memory\n"); - retval = -EAGAIN; - goto out1; - } - - dev->netdev_ops = &netdev_ops; - dev->watchdog_timeo = TX_TIMEOUT; - dev->ethtool_ops = &netdev_ethtool_ops; - dev->flags &= ~IFF_MULTICAST; /* Multicast doesn't work */ - return 0; -out1: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, EL16_IO_EXTENT); - return retval; -} - -static int el16_open(struct net_device *dev) -{ - /* Initialize the 82586 memory and start it. */ - init_82586_mem(dev); - - netif_start_queue(dev); - return 0; -} - - -static void el16_tx_timeout (struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - if (net_debug > 1) - pr_debug("%s: transmit timed out, %s? ", dev->name, - readw(shmem + iSCB_STATUS) & 0x8000 ? "IRQ conflict" : - "network cable problem"); - /* Try to restart the adaptor. */ - if (lp->last_restart == dev->stats.tx_packets) { - if (net_debug > 1) - pr_cont("Resetting board.\n"); - /* Completely reset the adaptor. */ - init_82586_mem (dev); - lp->tx_pkts_in_ring = 0; - } else { - /* Issue the channel attention signal and hope it "gets better". */ - if (net_debug > 1) - pr_cont("Kicking board.\n"); - writew(0xf000 | CUC_START | RX_START, shmem + iSCB_CMD); - outb (0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ - lp->last_restart = dev->stats.tx_packets; - } - dev->trans_start = jiffies; /* prevent tx timeout */ - netif_wake_queue (dev); -} - - -static netdev_tx_t el16_send_packet (struct sk_buff *skb, - struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - unsigned char *buf = skb->data; - - netif_stop_queue (dev); - - spin_lock_irqsave (&lp->lock, flags); - - dev->stats.tx_bytes += length; - /* Disable the 82586's input to the interrupt line. */ - outb (0x80, ioaddr + MISC_CTRL); - - hardware_send_packet (dev, buf, skb->len, length - skb->len); - - /* Enable the 82586 interrupt input. */ - outb (0x84, ioaddr + MISC_CTRL); - - spin_unlock_irqrestore (&lp->lock, flags); - - dev_kfree_skb (skb); - - /* You might need to clean up and record Tx statistics here. */ - - return NETDEV_TX_OK; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t el16_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status, boguscount = 0; - ushort ack_cmd = 0; - void __iomem *shmem; - - if (dev == NULL) { - pr_err("net_interrupt(): irq %d for unknown device.\n", irq); - return IRQ_NONE; - } - - ioaddr = dev->base_addr; - lp = netdev_priv(dev); - shmem = lp->base; - - spin_lock(&lp->lock); - - status = readw(shmem+iSCB_STATUS); - - if (net_debug > 4) { - pr_debug("%s: 3c507 interrupt, status %4.4x.\n", dev->name, status); - } - - /* Disable the 82586's input to the interrupt line. */ - outb(0x80, ioaddr + MISC_CTRL); - - /* Reap the Tx packet buffers. */ - while (lp->tx_pkts_in_ring) { - unsigned short tx_status = readw(shmem+lp->tx_reap); - if (!(tx_status & 0x8000)) { - if (net_debug > 5) - pr_debug("Tx command incomplete (%#x).\n", lp->tx_reap); - break; - } - /* Tx unsuccessful or some interesting status bit set. */ - if (!(tx_status & 0x2000) || (tx_status & 0x0f3f)) { - dev->stats.tx_errors++; - if (tx_status & 0x0600) dev->stats.tx_carrier_errors++; - if (tx_status & 0x0100) dev->stats.tx_fifo_errors++; - if (!(tx_status & 0x0040)) dev->stats.tx_heartbeat_errors++; - if (tx_status & 0x0020) dev->stats.tx_aborted_errors++; - dev->stats.collisions += tx_status & 0xf; - } - dev->stats.tx_packets++; - if (net_debug > 5) - pr_debug("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status); - lp->tx_reap += TX_BUF_SIZE; - if (lp->tx_reap > RX_BUF_START - TX_BUF_SIZE) - lp->tx_reap = TX_BUF_START; - - lp->tx_pkts_in_ring--; - /* There is always more space in the Tx ring buffer now. */ - netif_wake_queue(dev); - - if (++boguscount > 10) - break; - } - - if (status & 0x4000) { /* Packet received. */ - if (net_debug > 5) - pr_debug("Received packet, rx_head %04x.\n", lp->rx_head); - el16_rx(dev); - } - - /* Acknowledge the interrupt sources. */ - ack_cmd = status & 0xf000; - - if ((status & 0x0700) != 0x0200 && netif_running(dev)) { - if (net_debug) - pr_debug("%s: Command unit stopped, status %04x, restarting.\n", - dev->name, status); - /* If this ever occurs we should really re-write the idle loop, reset - the Tx list, and do a complete restart of the command unit. - For now we rely on the Tx timeout if the resume doesn't work. */ - ack_cmd |= CUC_RESUME; - } - - if ((status & 0x0070) != 0x0040 && netif_running(dev)) { - /* The Rx unit is not ready, it must be hung. Restart the receiver by - initializing the rx buffers, and issuing an Rx start command. */ - if (net_debug) - pr_debug("%s: Rx unit stopped, status %04x, restarting.\n", - dev->name, status); - init_rx_bufs(dev); - writew(RX_BUF_START,shmem+iSCB_RFA); - ack_cmd |= RX_START; - } - - writew(ack_cmd,shmem+iSCB_CMD); - outb(0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ - - /* Clear the latched interrupt. */ - outb(0, ioaddr + RESET_IRQ); - - /* Enable the 82586's interrupt input. */ - outb(0x84, ioaddr + MISC_CTRL); - spin_unlock(&lp->lock); - return IRQ_HANDLED; -} - -static int el16_close(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - netif_stop_queue(dev); - - /* Flush the Tx and disable Rx. */ - writew(RX_SUSPEND | CUC_SUSPEND,shmem+iSCB_CMD); - outb(0, ioaddr + SIGNAL_CA); - - /* Disable the 82586's input to the interrupt line. */ - outb(0x80, ioaddr + MISC_CTRL); - - /* We always physically use the IRQ line, so we don't do free_irq(). */ - - /* Update the statistics here. */ - - return 0; -} - -/* Initialize the Rx-block list. */ -static void init_rx_bufs(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - void __iomem *write_ptr; - unsigned short SCB_base = SCB_BASE; - - int cur_rxbuf = lp->rx_head = RX_BUF_START; - - /* Initialize each Rx frame + data buffer. */ - do { /* While there is room for one more. */ - - write_ptr = lp->base + cur_rxbuf; - - writew(0x0000,write_ptr); /* Status */ - writew(0x0000,write_ptr+=2); /* Command */ - writew(cur_rxbuf + RX_BUF_SIZE,write_ptr+=2); /* Link */ - writew(cur_rxbuf + 22,write_ptr+=2); /* Buffer offset */ - writew(0x0000,write_ptr+=2); /* Pad for dest addr. */ - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); /* Pad for source addr. */ - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); - writew(0x0000,write_ptr+=2); /* Pad for protocol. */ - - writew(0x0000,write_ptr+=2); /* Buffer: Actual count */ - writew(-1,write_ptr+=2); /* Buffer: Next (none). */ - writew(cur_rxbuf + 0x20 + SCB_base,write_ptr+=2);/* Buffer: Address low */ - writew(0x0000,write_ptr+=2); - /* Finally, the number of bytes in the buffer. */ - writew(0x8000 + RX_BUF_SIZE-0x20,write_ptr+=2); - - lp->rx_tail = cur_rxbuf; - cur_rxbuf += RX_BUF_SIZE; - } while (cur_rxbuf <= RX_BUF_END - RX_BUF_SIZE); - - /* Terminate the list by setting the EOL bit, and wrap the pointer to make - the list a ring. */ - write_ptr = lp->base + lp->rx_tail + 2; - writew(0xC000,write_ptr); /* Command, mark as last. */ - writew(lp->rx_head,write_ptr+2); /* Link */ -} - -static void init_82586_mem(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - void __iomem *shmem = lp->base; - - /* Enable loopback to protect the wire while starting up, - and hold the 586 in reset during the memory initialization. */ - outb(0x20, ioaddr + MISC_CTRL); - - /* Fix the ISCP address and base. */ - init_words[3] = SCB_BASE; - init_words[7] = SCB_BASE; - - /* Write the words at 0xfff6 (address-aliased to 0xfffff6). */ - memcpy_toio(lp->base + RX_BUF_END - 10, init_words, 10); - - /* Write the words at 0x0000. */ - memcpy_toio(lp->base, init_words + 5, sizeof(init_words) - 10); - - /* Fill in the station address. */ - memcpy_toio(lp->base+SA_OFFSET, dev->dev_addr, ETH_ALEN); - - /* The Tx-block list is written as needed. We just set up the values. */ - lp->tx_cmd_link = IDLELOOP + 4; - lp->tx_head = lp->tx_reap = TX_BUF_START; - - init_rx_bufs(dev); - - /* Start the 586 by releasing the reset line, but leave loopback. */ - outb(0xA0, ioaddr + MISC_CTRL); - - /* This was time consuming to track down: you need to give two channel - attention signals to reliably start up the i82586. */ - outb(0, ioaddr + SIGNAL_CA); - - { - int boguscnt = 50; - while (readw(shmem+iSCB_STATUS) == 0) - if (--boguscnt == 0) { - pr_warning("%s: i82586 initialization timed out with status %04x, cmd %04x.\n", - dev->name, readw(shmem+iSCB_STATUS), readw(shmem+iSCB_CMD)); - break; - } - /* Issue channel-attn -- the 82586 won't start. */ - outb(0, ioaddr + SIGNAL_CA); - } - - /* Disable loopback and enable interrupts. */ - outb(0x84, ioaddr + MISC_CTRL); - if (net_debug > 4) - pr_debug("%s: Initialized 82586, status %04x.\n", dev->name, - readw(shmem+iSCB_STATUS)); -} - -static void hardware_send_packet(struct net_device *dev, void *buf, short length, short pad) -{ - struct net_local *lp = netdev_priv(dev); - short ioaddr = dev->base_addr; - ushort tx_block = lp->tx_head; - void __iomem *write_ptr = lp->base + tx_block; - static char padding[ETH_ZLEN]; - - /* Set the write pointer to the Tx block, and put out the header. */ - writew(0x0000,write_ptr); /* Tx status */ - writew(CMD_INTR|CmdTx,write_ptr+=2); /* Tx command */ - writew(tx_block+16,write_ptr+=2); /* Next command is a NoOp. */ - writew(tx_block+8,write_ptr+=2); /* Data Buffer offset. */ - - /* Output the data buffer descriptor. */ - writew((pad + length) | 0x8000,write_ptr+=2); /* Byte count parameter. */ - writew(-1,write_ptr+=2); /* No next data buffer. */ - writew(tx_block+22+SCB_BASE,write_ptr+=2); /* Buffer follows the NoOp command. */ - writew(0x0000,write_ptr+=2); /* Buffer address high bits (always zero). */ - - /* Output the Loop-back NoOp command. */ - writew(0x0000,write_ptr+=2); /* Tx status */ - writew(CmdNOp,write_ptr+=2); /* Tx command */ - writew(tx_block+16,write_ptr+=2); /* Next is myself. */ - - /* Output the packet at the write pointer. */ - memcpy_toio(write_ptr+2, buf, length); - if (pad) - memcpy_toio(write_ptr+length+2, padding, pad); - - /* Set the old command link pointing to this send packet. */ - writew(tx_block,lp->base + lp->tx_cmd_link); - lp->tx_cmd_link = tx_block + 20; - - /* Set the next free tx region. */ - lp->tx_head = tx_block + TX_BUF_SIZE; - if (lp->tx_head > RX_BUF_START - TX_BUF_SIZE) - lp->tx_head = TX_BUF_START; - - if (net_debug > 4) { - pr_debug("%s: 3c507 @%x send length = %d, tx_block %3x, next %3x.\n", - dev->name, ioaddr, length, tx_block, lp->tx_head); - } - - /* Grimly block further packets if there has been insufficient reaping. */ - if (++lp->tx_pkts_in_ring < NUM_TX_BUFS) - netif_wake_queue(dev); -} - -static void el16_rx(struct net_device *dev) -{ - struct net_local *lp = netdev_priv(dev); - void __iomem *shmem = lp->base; - ushort rx_head = lp->rx_head; - ushort rx_tail = lp->rx_tail; - ushort boguscount = 10; - short frame_status; - - while ((frame_status = readw(shmem+rx_head)) < 0) { /* Command complete */ - void __iomem *read_frame = lp->base + rx_head; - ushort rfd_cmd = readw(read_frame+2); - ushort next_rx_frame = readw(read_frame+4); - ushort data_buffer_addr = readw(read_frame+6); - void __iomem *data_frame = lp->base + data_buffer_addr; - ushort pkt_len = readw(data_frame); - - if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22 || - (pkt_len & 0xC000) != 0xC000) { - pr_err("%s: Rx frame at %#x corrupted, " - "status %04x cmd %04x next %04x " - "data-buf @%04x %04x.\n", - dev->name, rx_head, frame_status, rfd_cmd, - next_rx_frame, data_buffer_addr, pkt_len); - } else if ((frame_status & 0x2000) == 0) { - /* Frame Rxed, but with error. */ - dev->stats.rx_errors++; - if (frame_status & 0x0800) dev->stats.rx_crc_errors++; - if (frame_status & 0x0400) dev->stats.rx_frame_errors++; - if (frame_status & 0x0200) dev->stats.rx_fifo_errors++; - if (frame_status & 0x0100) dev->stats.rx_over_errors++; - if (frame_status & 0x0080) dev->stats.rx_length_errors++; - } else { - /* Malloc up new buffer. */ - struct sk_buff *skb; - - pkt_len &= 0x3fff; - skb = netdev_alloc_skb(dev, pkt_len + 2); - if (skb == NULL) { - pr_err("%s: Memory squeeze, dropping packet.\n", - dev->name); - dev->stats.rx_dropped++; - break; - } - - skb_reserve(skb,2); - - /* 'skb->data' points to the start of sk_buff data area. */ - memcpy_fromio(skb_put(skb,pkt_len), data_frame + 10, pkt_len); - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - dev->stats.rx_bytes += pkt_len; - } - - /* Clear the status word and set End-of-List on the rx frame. */ - writew(0,read_frame); - writew(0xC000,read_frame+2); - /* Clear the end-of-list on the prev. RFD. */ - writew(0x0000,lp->base + rx_tail + 2); - - rx_tail = rx_head; - rx_head = next_rx_frame; - if (--boguscount == 0) - break; - } - - lp->rx_head = rx_head; - lp->rx_tail = rx_tail; -} - -static void netdev_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strcpy(info->driver, DRV_NAME); - strcpy(info->version, DRV_VERSION); - sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr); -} - -static u32 netdev_get_msglevel(struct net_device *dev) -{ - return debug; -} - -static void netdev_set_msglevel(struct net_device *dev, u32 level) -{ - debug = level; -} - -static const struct ethtool_ops netdev_ethtool_ops = { - .get_drvinfo = netdev_get_drvinfo, - .get_msglevel = netdev_get_msglevel, - .set_msglevel = netdev_set_msglevel, -}; - -#ifdef MODULE -static struct net_device *dev_3c507; -module_param(io, int, 0); -module_param(irq, int, 0); -MODULE_PARM_DESC(io, "EtherLink16 I/O base address"); -MODULE_PARM_DESC(irq, "(ignored)"); - -int __init init_module(void) -{ - if (io == 0) - pr_notice("3c507: You should not use auto-probing with insmod!\n"); - dev_3c507 = el16_probe(-1); - return IS_ERR(dev_3c507) ? PTR_ERR(dev_3c507) : 0; -} - -void __exit -cleanup_module(void) -{ - struct net_device *dev = dev_3c507; - unregister_netdev(dev); - free_irq(dev->irq, dev); - iounmap(((struct net_local *)netdev_priv(dev))->base); - release_region(dev->base_addr, EL16_IO_EXTENT); - free_netdev(dev); -} -#endif /* MODULE */ -MODULE_LICENSE("GPL"); |