summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/i825xx/eepro.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/i825xx/eepro.c')
-rw-r--r--drivers/net/ethernet/i825xx/eepro.c1822
1 files changed, 1822 insertions, 0 deletions
diff --git a/drivers/net/ethernet/i825xx/eepro.c b/drivers/net/ethernet/i825xx/eepro.c
new file mode 100644
index 00000000000..067c46069a1
--- /dev/null
+++ b/drivers/net/ethernet/i825xx/eepro.c
@@ -0,0 +1,1822 @@
+/* eepro.c: Intel EtherExpress Pro/10 device driver for Linux. */
+/*
+ Written 1994, 1995,1996 by Bao C. Ha.
+
+ Copyright (C) 1994, 1995,1996 by Bao C. Ha.
+
+ This software may be used and distributed
+ according to the terms of the GNU General Public License,
+ incorporated herein by reference.
+
+ The author may be reached at bao.ha@srs.gov
+ or 418 Hastings Place, Martinez, GA 30907.
+
+ Things remaining to do:
+ Better record keeping of errors.
+ Eliminate transmit interrupt to reduce overhead.
+ Implement "concurrent processing". I won't be doing it!
+
+ Bugs:
+
+ If you have a problem of not detecting the 82595 during a
+ reboot (warm reset), disable the FLASH memory should fix it.
+ This is a compatibility hardware problem.
+
+ Versions:
+ 0.13b basic ethtool support (aris, 09/13/2004)
+ 0.13a in memory shortage, drop packets also in board
+ (Michael Westermann <mw@microdata-pos.de>, 07/30/2002)
+ 0.13 irq sharing, rewrote probe function, fixed a nasty bug in
+ hardware_send_packet and a major cleanup (aris, 11/08/2001)
+ 0.12d fixing a problem with single card detected as eight eth devices
+ fixing a problem with sudden drop in card performance
+ (chris (asdn@go2.pl), 10/29/2001)
+ 0.12c fixing some problems with old cards (aris, 01/08/2001)
+ 0.12b misc fixes (aris, 06/26/2000)
+ 0.12a port of version 0.12a of 2.2.x kernels to 2.3.x
+ (aris (aris@conectiva.com.br), 05/19/2000)
+ 0.11e some tweaks about multiple cards support (PdP, jul/aug 1999)
+ 0.11d added __initdata, __init stuff; call spin_lock_init
+ in eepro_probe1. Replaced "eepro" by dev->name. Augmented
+ the code protected by spin_lock in interrupt routine
+ (PdP, 12/12/1998)
+ 0.11c minor cleanup (PdP, RMC, 09/12/1998)
+ 0.11b Pascal Dupuis (dupuis@lei.ucl.ac.be): works as a module
+ under 2.1.xx. Debug messages are flagged as KERN_DEBUG to
+ avoid console flooding. Added locking at critical parts. Now
+ the dawn thing is SMP safe.
+ 0.11a Attempt to get 2.1.xx support up (RMC)
+ 0.11 Brian Candler added support for multiple cards. Tested as
+ a module, no idea if it works when compiled into kernel.
+
+ 0.10e Rick Bressler notified me that ifconfig up;ifconfig down fails
+ because the irq is lost somewhere. Fixed that by moving
+ request_irq and free_irq to eepro_open and eepro_close respectively.
+ 0.10d Ugh! Now Wakeup works. Was seriously broken in my first attempt.
+ I'll need to find a way to specify an ioport other than
+ the default one in the PnP case. PnP definitively sucks.
+ And, yes, this is not the only reason.
+ 0.10c PnP Wakeup Test for 595FX. uncomment #define PnPWakeup;
+ to use.
+ 0.10b Should work now with (some) Pro/10+. At least for
+ me (and my two cards) it does. _No_ guarantee for
+ function with non-Pro/10+ cards! (don't have any)
+ (RMC, 9/11/96)
+
+ 0.10 Added support for the Etherexpress Pro/10+. The
+ IRQ map was changed significantly from the old
+ pro/10. The new interrupt map was provided by
+ Rainer M. Canavan (Canavan@Zeus.cs.bonn.edu).
+ (BCH, 9/3/96)
+
+ 0.09 Fixed a race condition in the transmit algorithm,
+ which causes crashes under heavy load with fast
+ pentium computers. The performance should also
+ improve a bit. The size of RX buffer, and hence
+ TX buffer, can also be changed via lilo or insmod.
+ (BCH, 7/31/96)
+
+ 0.08 Implement 32-bit I/O for the 82595TX and 82595FX
+ based lan cards. Disable full-duplex mode if TPE
+ is not used. (BCH, 4/8/96)
+
+ 0.07a Fix a stat report which counts every packet as a
+ heart-beat failure. (BCH, 6/3/95)
+
+ 0.07 Modified to support all other 82595-based lan cards.
+ The IRQ vector of the EtherExpress Pro will be set
+ according to the value saved in the EEPROM. For other
+ cards, I will do autoirq_request() to grab the next
+ available interrupt vector. (BCH, 3/17/95)
+
+ 0.06a,b Interim released. Minor changes in the comments and
+ print out format. (BCH, 3/9/95 and 3/14/95)
+
+ 0.06 First stable release that I am comfortable with. (BCH,
+ 3/2/95)
+
+ 0.05 Complete testing of multicast. (BCH, 2/23/95)
+
+ 0.04 Adding multicast support. (BCH, 2/14/95)
+
+ 0.03 First widely alpha release for public testing.
+ (BCH, 2/14/95)
+
+*/
+
+static const char version[] =
+ "eepro.c: v0.13b 09/13/2004 aris@cathedrallabs.org\n";
+
+#include <linux/module.h>
+
+/*
+ Sources:
+
+ This driver wouldn't have been written without the availability
+ of the Crynwr's Lan595 driver source code. It helps me to
+ familiarize with the 82595 chipset while waiting for the Intel
+ documentation. I also learned how to detect the 82595 using
+ the packet driver's technique.
+
+ This driver is written by cutting and pasting the skeleton.c driver
+ provided by Donald Becker. I also borrowed the EEPROM routine from
+ Donald Becker's 82586 driver.
+
+ Datasheet for the Intel 82595 (including the TX and FX version). It
+ provides just enough info that the casual reader might think that it
+ documents the i82595.
+
+ The User Manual for the 82595. It provides a lot of the missing
+ information.
+
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/ethtool.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define DRV_NAME "eepro"
+#define DRV_VERSION "0.13c"
+
+#define compat_dev_kfree_skb( skb, mode ) dev_kfree_skb( (skb) )
+/* I had reports of looong delays with SLOW_DOWN defined as udelay(2) */
+#define SLOW_DOWN inb(0x80)
+/* udelay(2) */
+#define compat_init_data __initdata
+enum iftype { AUI=0, BNC=1, TPE=2 };
+
+/* First, a few definitions that the brave might change. */
+/* A zero-terminated list of I/O addresses to be probed. */
+static unsigned int eepro_portlist[] compat_init_data =
+ { 0x300, 0x210, 0x240, 0x280, 0x2C0, 0x200, 0x320, 0x340, 0x360, 0};
+/* note: 0x300 is default, the 595FX supports ALL IO Ports
+ from 0x000 to 0x3F0, some of which are reserved in PCs */
+
+/* To try the (not-really PnP Wakeup: */
+/*
+#define PnPWakeup
+*/
+
+/* use 0 for production, 1 for verification, >2 for debug */
+#ifndef NET_DEBUG
+#define NET_DEBUG 0
+#endif
+static unsigned int net_debug = NET_DEBUG;
+
+/* The number of low I/O ports used by the ethercard. */
+#define EEPRO_IO_EXTENT 16
+
+/* Different 82595 chips */
+#define LAN595 0
+#define LAN595TX 1
+#define LAN595FX 2
+#define LAN595FX_10ISA 3
+
+/* Information that need to be kept for each board. */
+struct eepro_local {
+ unsigned rx_start;
+ unsigned tx_start; /* start of the transmit chain */
+ int tx_last; /* pointer to last packet in the transmit chain */
+ unsigned tx_end; /* end of the transmit chain (plus 1) */
+ int eepro; /* 1 for the EtherExpress Pro/10,
+ 2 for the EtherExpress Pro/10+,
+ 3 for the EtherExpress 10 (blue cards),
+ 0 for other 82595-based lan cards. */
+ int version; /* a flag to indicate if this is a TX or FX
+ version of the 82595 chip. */
+ int stepping;
+
+ spinlock_t lock; /* Serializing lock */
+
+ unsigned rcv_ram; /* pre-calculated space for rx */
+ unsigned xmt_ram; /* pre-calculated space for tx */
+ unsigned char xmt_bar;
+ unsigned char xmt_lower_limit_reg;
+ unsigned char xmt_upper_limit_reg;
+ short xmt_lower_limit;
+ short xmt_upper_limit;
+ short rcv_lower_limit;
+ short rcv_upper_limit;
+ unsigned char eeprom_reg;
+ unsigned short word[8];
+};
+
+/* The station (ethernet) address prefix, used for IDing the board. */
+#define SA_ADDR0 0x00 /* Etherexpress Pro/10 */
+#define SA_ADDR1 0xaa
+#define SA_ADDR2 0x00
+
+#define GetBit(x,y) ((x & (1<<y))>>y)
+
+/* EEPROM Word 0: */
+#define ee_PnP 0 /* Plug 'n Play enable bit */
+#define ee_Word1 1 /* Word 1? */
+#define ee_BusWidth 2 /* 8/16 bit */
+#define ee_FlashAddr 3 /* Flash Address */
+#define ee_FlashMask 0x7 /* Mask */
+#define ee_AutoIO 6 /* */
+#define ee_reserved0 7 /* =0! */
+#define ee_Flash 8 /* Flash there? */
+#define ee_AutoNeg 9 /* Auto Negotiation enabled? */
+#define ee_IO0 10 /* IO Address LSB */
+#define ee_IO0Mask 0x /*...*/
+#define ee_IO1 15 /* IO MSB */
+
+/* EEPROM Word 1: */
+#define ee_IntSel 0 /* Interrupt */
+#define ee_IntMask 0x7
+#define ee_LI 3 /* Link Integrity 0= enabled */
+#define ee_PC 4 /* Polarity Correction 0= enabled */
+#define ee_TPE_AUI 5 /* PortSelection 1=TPE */
+#define ee_Jabber 6 /* Jabber prevention 0= enabled */
+#define ee_AutoPort 7 /* Auto Port Selection 1= Disabled */
+#define ee_SMOUT 8 /* SMout Pin Control 0= Input */
+#define ee_PROM 9 /* Flash EPROM / PROM 0=Flash */
+#define ee_reserved1 10 /* .. 12 =0! */
+#define ee_AltReady 13 /* Alternate Ready, 0=normal */
+#define ee_reserved2 14 /* =0! */
+#define ee_Duplex 15
+
+/* Word2,3,4: */
+#define ee_IA5 0 /*bit start for individual Addr Byte 5 */
+#define ee_IA4 8 /*bit start for individual Addr Byte 5 */
+#define ee_IA3 0 /*bit start for individual Addr Byte 5 */
+#define ee_IA2 8 /*bit start for individual Addr Byte 5 */
+#define ee_IA1 0 /*bit start for individual Addr Byte 5 */
+#define ee_IA0 8 /*bit start for individual Addr Byte 5 */
+
+/* Word 5: */
+#define ee_BNC_TPE 0 /* 0=TPE */
+#define ee_BootType 1 /* 00=None, 01=IPX, 10=ODI, 11=NDIS */
+#define ee_BootTypeMask 0x3
+#define ee_NumConn 3 /* Number of Connections 0= One or Two */
+#define ee_FlashSock 4 /* Presence of Flash Socket 0= Present */
+#define ee_PortTPE 5
+#define ee_PortBNC 6
+#define ee_PortAUI 7
+#define ee_PowerMgt 10 /* 0= disabled */
+#define ee_CP 13 /* Concurrent Processing */
+#define ee_CPMask 0x7
+
+/* Word 6: */
+#define ee_Stepping 0 /* Stepping info */
+#define ee_StepMask 0x0F
+#define ee_BoardID 4 /* Manucaturer Board ID, reserved */
+#define ee_BoardMask 0x0FFF
+
+/* Word 7: */
+#define ee_INT_TO_IRQ 0 /* int to IRQ Mapping = 0x1EB8 for Pro/10+ */
+#define ee_FX_INT2IRQ 0x1EB8 /* the _only_ mapping allowed for FX chips */
+
+/*..*/
+#define ee_SIZE 0x40 /* total EEprom Size */
+#define ee_Checksum 0xBABA /* initial and final value for adding checksum */
+
+
+/* Card identification via EEprom: */
+#define ee_addr_vendor 0x10 /* Word offset for EISA Vendor ID */
+#define ee_addr_id 0x11 /* Word offset for Card ID */
+#define ee_addr_SN 0x12 /* Serial Number */
+#define ee_addr_CRC_8 0x14 /* CRC over last thee Bytes */
+
+
+#define ee_vendor_intel0 0x25 /* Vendor ID Intel */
+#define ee_vendor_intel1 0xD4
+#define ee_id_eepro10p0 0x10 /* ID for eepro/10+ */
+#define ee_id_eepro10p1 0x31
+
+#define TX_TIMEOUT ((4*HZ)/10)
+
+/* Index to functions, as function prototypes. */
+
+static int eepro_probe1(struct net_device *dev, int autoprobe);
+static int eepro_open(struct net_device *dev);
+static netdev_tx_t eepro_send_packet(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t eepro_interrupt(int irq, void *dev_id);
+static void eepro_rx(struct net_device *dev);
+static void eepro_transmit_interrupt(struct net_device *dev);
+static int eepro_close(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static void eepro_tx_timeout (struct net_device *dev);
+
+static int read_eeprom(int ioaddr, int location, struct net_device *dev);
+static int hardware_send_packet(struct net_device *dev, void *buf, short length);
+static int eepro_grab_irq(struct net_device *dev);
+
+/*
+ Details of the i82595.
+
+You will need either the datasheet or the user manual to understand what
+is going on here. The 82595 is very different from the 82586, 82593.
+
+The receive algorithm in eepro_rx() is just an implementation of the
+RCV ring structure that the Intel 82595 imposes at the hardware level.
+The receive buffer is set at 24K, and the transmit buffer is 8K. I
+am assuming that the total buffer memory is 32K, which is true for the
+Intel EtherExpress Pro/10. If it is less than that on a generic card,
+the driver will be broken.
+
+The transmit algorithm in the hardware_send_packet() is similar to the
+one in the eepro_rx(). The transmit buffer is a ring linked list.
+I just queue the next available packet to the end of the list. In my
+system, the 82595 is so fast that the list seems to always contain a
+single packet. In other systems with faster computers and more congested
+network traffics, the ring linked list should improve performance by
+allowing up to 8K worth of packets to be queued.
+
+The sizes of the receive and transmit buffers can now be changed via lilo
+or insmod. Lilo uses the appended line "ether=io,irq,debug,rx-buffer,eth0"
+where rx-buffer is in KB unit. Modules uses the parameter mem which is
+also in KB unit, for example "insmod io=io-address irq=0 mem=rx-buffer."
+The receive buffer has to be more than 3K or less than 29K. Otherwise,
+it is reset to the default of 24K, and, hence, 8K for the trasnmit
+buffer (transmit-buffer = 32K - receive-buffer).
+
+*/
+#define RAM_SIZE 0x8000
+
+#define RCV_HEADER 8
+#define RCV_DEFAULT_RAM 0x6000
+
+#define XMT_HEADER 8
+#define XMT_DEFAULT_RAM (RAM_SIZE - RCV_DEFAULT_RAM)
+
+#define XMT_START_PRO RCV_DEFAULT_RAM
+#define XMT_START_10 0x0000
+#define RCV_START_PRO 0x0000
+#define RCV_START_10 XMT_DEFAULT_RAM
+
+#define RCV_DONE 0x0008
+#define RX_OK 0x2000
+#define RX_ERROR 0x0d81
+
+#define TX_DONE_BIT 0x0080
+#define TX_OK 0x2000
+#define CHAIN_BIT 0x8000
+#define XMT_STATUS 0x02
+#define XMT_CHAIN 0x04
+#define XMT_COUNT 0x06
+
+#define BANK0_SELECT 0x00
+#define BANK1_SELECT 0x40
+#define BANK2_SELECT 0x80
+
+/* Bank 0 registers */
+#define COMMAND_REG 0x00 /* Register 0 */
+#define MC_SETUP 0x03
+#define XMT_CMD 0x04
+#define DIAGNOSE_CMD 0x07
+#define RCV_ENABLE_CMD 0x08
+#define RCV_DISABLE_CMD 0x0a
+#define STOP_RCV_CMD 0x0b
+#define RESET_CMD 0x0e
+#define POWER_DOWN_CMD 0x18
+#define RESUME_XMT_CMD 0x1c
+#define SEL_RESET_CMD 0x1e
+#define STATUS_REG 0x01 /* Register 1 */
+#define RX_INT 0x02
+#define TX_INT 0x04
+#define EXEC_STATUS 0x30
+#define ID_REG 0x02 /* Register 2 */
+#define R_ROBIN_BITS 0xc0 /* round robin counter */
+#define ID_REG_MASK 0x2c
+#define ID_REG_SIG 0x24
+#define AUTO_ENABLE 0x10
+#define INT_MASK_REG 0x03 /* Register 3 */
+#define RX_STOP_MASK 0x01
+#define RX_MASK 0x02
+#define TX_MASK 0x04
+#define EXEC_MASK 0x08
+#define ALL_MASK 0x0f
+#define IO_32_BIT 0x10
+#define RCV_BAR 0x04 /* The following are word (16-bit) registers */
+#define RCV_STOP 0x06
+
+#define XMT_BAR_PRO 0x0a
+#define XMT_BAR_10 0x0b
+
+#define HOST_ADDRESS_REG 0x0c
+#define IO_PORT 0x0e
+#define IO_PORT_32_BIT 0x0c
+
+/* Bank 1 registers */
+#define REG1 0x01
+#define WORD_WIDTH 0x02
+#define INT_ENABLE 0x80
+#define INT_NO_REG 0x02
+#define RCV_LOWER_LIMIT_REG 0x08
+#define RCV_UPPER_LIMIT_REG 0x09
+
+#define XMT_LOWER_LIMIT_REG_PRO 0x0a
+#define XMT_UPPER_LIMIT_REG_PRO 0x0b
+#define XMT_LOWER_LIMIT_REG_10 0x0b
+#define XMT_UPPER_LIMIT_REG_10 0x0a
+
+/* Bank 2 registers */
+#define XMT_Chain_Int 0x20 /* Interrupt at the end of the transmit chain */
+#define XMT_Chain_ErrStop 0x40 /* Interrupt at the end of the chain even if there are errors */
+#define RCV_Discard_BadFrame 0x80 /* Throw bad frames away, and continue to receive others */
+#define REG2 0x02
+#define PRMSC_Mode 0x01
+#define Multi_IA 0x20
+#define REG3 0x03
+#define TPE_BIT 0x04
+#define BNC_BIT 0x20
+#define REG13 0x0d
+#define FDX 0x00
+#define A_N_ENABLE 0x02
+
+#define I_ADD_REG0 0x04
+#define I_ADD_REG1 0x05
+#define I_ADD_REG2 0x06
+#define I_ADD_REG3 0x07
+#define I_ADD_REG4 0x08
+#define I_ADD_REG5 0x09
+
+#define EEPROM_REG_PRO 0x0a
+#define EEPROM_REG_10 0x0b
+
+#define EESK 0x01
+#define EECS 0x02
+#define EEDI 0x04
+#define EEDO 0x08
+
+/* do a full reset */
+#define eepro_reset(ioaddr) outb(RESET_CMD, ioaddr)
+
+/* do a nice reset */
+#define eepro_sel_reset(ioaddr) { \
+ outb(SEL_RESET_CMD, ioaddr); \
+ SLOW_DOWN; \
+ SLOW_DOWN; \
+ }
+
+/* disable all interrupts */
+#define eepro_dis_int(ioaddr) outb(ALL_MASK, ioaddr + INT_MASK_REG)
+
+/* clear all interrupts */
+#define eepro_clear_int(ioaddr) outb(ALL_MASK, ioaddr + STATUS_REG)
+
+/* enable tx/rx */
+#define eepro_en_int(ioaddr) outb(ALL_MASK & ~(RX_MASK | TX_MASK), \
+ ioaddr + INT_MASK_REG)
+
+/* enable exec event interrupt */
+#define eepro_en_intexec(ioaddr) outb(ALL_MASK & ~(EXEC_MASK), ioaddr + INT_MASK_REG)
+
+/* enable rx */
+#define eepro_en_rx(ioaddr) outb(RCV_ENABLE_CMD, ioaddr)
+
+/* disable rx */
+#define eepro_dis_rx(ioaddr) outb(RCV_DISABLE_CMD, ioaddr)
+
+/* switch bank */
+#define eepro_sw2bank0(ioaddr) outb(BANK0_SELECT, ioaddr)
+#define eepro_sw2bank1(ioaddr) outb(BANK1_SELECT, ioaddr)
+#define eepro_sw2bank2(ioaddr) outb(BANK2_SELECT, ioaddr)
+
+/* enable interrupt line */
+#define eepro_en_intline(ioaddr) outb(inb(ioaddr + REG1) | INT_ENABLE,\
+ ioaddr + REG1)
+
+/* disable interrupt line */
+#define eepro_dis_intline(ioaddr) outb(inb(ioaddr + REG1) & 0x7f, \
+ ioaddr + REG1);
+
+/* set diagnose flag */
+#define eepro_diag(ioaddr) outb(DIAGNOSE_CMD, ioaddr)
+
+/* ack for rx int */
+#define eepro_ack_rx(ioaddr) outb (RX_INT, ioaddr + STATUS_REG)
+
+/* ack for tx int */
+#define eepro_ack_tx(ioaddr) outb (TX_INT, ioaddr + STATUS_REG)
+
+/* a complete sel reset */
+#define eepro_complete_selreset(ioaddr) { \
+ dev->stats.tx_errors++;\
+ eepro_sel_reset(ioaddr);\
+ lp->tx_end = \
+ lp->xmt_lower_limit;\
+ lp->tx_start = lp->tx_end;\
+ lp->tx_last = 0;\
+ dev->trans_start = jiffies;\
+ netif_wake_queue(dev);\
+ eepro_en_rx(ioaddr);\
+ }
+
+/* Check for a network adaptor of this type, and return '0' if one exists.
+ If dev->base_addr == 0, probe all likely locations.
+ If dev->base_addr == 1, always return failure.
+ If dev->base_addr == 2, allocate space for the device and return success
+ (detachable devices only).
+ */
+static int __init do_eepro_probe(struct net_device *dev)
+{
+ int i;
+ int base_addr = dev->base_addr;
+ int irq = dev->irq;
+
+#ifdef PnPWakeup
+ /* XXXX for multiple cards should this only be run once? */
+
+ /* Wakeup: */
+ #define WakeupPort 0x279
+ #define WakeupSeq {0x6A, 0xB5, 0xDA, 0xED, 0xF6, 0xFB, 0x7D, 0xBE,\
+ 0xDF, 0x6F, 0x37, 0x1B, 0x0D, 0x86, 0xC3, 0x61,\
+ 0xB0, 0x58, 0x2C, 0x16, 0x8B, 0x45, 0xA2, 0xD1,\
+ 0xE8, 0x74, 0x3A, 0x9D, 0xCE, 0xE7, 0x73, 0x43}
+
+ {
+ unsigned short int WS[32]=WakeupSeq;
+
+ if (request_region(WakeupPort, 2, "eepro wakeup")) {
+ if (net_debug>5)
+ printk(KERN_DEBUG "Waking UP\n");
+
+ outb_p(0,WakeupPort);
+ outb_p(0,WakeupPort);
+ for (i=0; i<32; i++) {
+ outb_p(WS[i],WakeupPort);
+ if (net_debug>5) printk(KERN_DEBUG ": %#x ",WS[i]);
+ }
+
+ release_region(WakeupPort, 2);
+ } else
+ printk(KERN_WARNING "PnP wakeup region busy!\n");
+ }
+#endif
+
+ if (base_addr > 0x1ff) /* Check a single specified location. */
+ return eepro_probe1(dev, 0);
+
+ else if (base_addr != 0) /* Don't probe at all. */
+ return -ENXIO;
+
+ for (i = 0; eepro_portlist[i]; i++) {
+ dev->base_addr = eepro_portlist[i];
+ dev->irq = irq;
+ if (eepro_probe1(dev, 1) == 0)
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+#ifndef MODULE
+struct net_device * __init eepro_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct eepro_local));
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ err = do_eepro_probe(dev);
+ if (err)
+ goto out;
+ return dev;
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+#endif
+
+static void __init printEEPROMInfo(struct net_device *dev)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ unsigned short Word;
+ int i,j;
+
+ j = ee_Checksum;
+ for (i = 0; i < 8; i++)
+ j += lp->word[i];
+ for ( ; i < ee_SIZE; i++)
+ j += read_eeprom(ioaddr, i, dev);
+
+ printk(KERN_DEBUG "Checksum: %#x\n",j&0xffff);
+
+ Word = lp->word[0];
+ printk(KERN_DEBUG "Word0:\n");
+ printk(KERN_DEBUG " Plug 'n Pray: %d\n",GetBit(Word,ee_PnP));
+ printk(KERN_DEBUG " Buswidth: %d\n",(GetBit(Word,ee_BusWidth)+1)*8 );
+ printk(KERN_DEBUG " AutoNegotiation: %d\n",GetBit(Word,ee_AutoNeg));
+ printk(KERN_DEBUG " IO Address: %#x\n", (Word>>ee_IO0)<<4);
+
+ if (net_debug>4) {
+ Word = lp->word[1];
+ printk(KERN_DEBUG "Word1:\n");
+ printk(KERN_DEBUG " INT: %d\n", Word & ee_IntMask);
+ printk(KERN_DEBUG " LI: %d\n", GetBit(Word,ee_LI));
+ printk(KERN_DEBUG " PC: %d\n", GetBit(Word,ee_PC));
+ printk(KERN_DEBUG " TPE/AUI: %d\n", GetBit(Word,ee_TPE_AUI));
+ printk(KERN_DEBUG " Jabber: %d\n", GetBit(Word,ee_Jabber));
+ printk(KERN_DEBUG " AutoPort: %d\n", !GetBit(Word,ee_AutoPort));
+ printk(KERN_DEBUG " Duplex: %d\n", GetBit(Word,ee_Duplex));
+ }
+
+ Word = lp->word[5];
+ printk(KERN_DEBUG "Word5:\n");
+ printk(KERN_DEBUG " BNC: %d\n",GetBit(Word,ee_BNC_TPE));
+ printk(KERN_DEBUG " NumConnectors: %d\n",GetBit(Word,ee_NumConn));
+ printk(KERN_DEBUG " Has ");
+ if (GetBit(Word,ee_PortTPE)) printk(KERN_DEBUG "TPE ");
+ if (GetBit(Word,ee_PortBNC)) printk(KERN_DEBUG "BNC ");
+ if (GetBit(Word,ee_PortAUI)) printk(KERN_DEBUG "AUI ");
+ printk(KERN_DEBUG "port(s)\n");
+
+ Word = lp->word[6];
+ printk(KERN_DEBUG "Word6:\n");
+ printk(KERN_DEBUG " Stepping: %d\n",Word & ee_StepMask);
+ printk(KERN_DEBUG " BoardID: %d\n",Word>>ee_BoardID);
+
+ Word = lp->word[7];
+ printk(KERN_DEBUG "Word7:\n");
+ printk(KERN_DEBUG " INT to IRQ:\n");
+
+ for (i=0, j=0; i<15; i++)
+ if (GetBit(Word,i)) printk(KERN_DEBUG " INT%d -> IRQ %d;",j++,i);
+
+ printk(KERN_DEBUG "\n");
+}
+
+/* function to recalculate the limits of buffer based on rcv_ram */
+static void eepro_recalc (struct net_device *dev)
+{
+ struct eepro_local * lp;
+
+ lp = netdev_priv(dev);
+ lp->xmt_ram = RAM_SIZE - lp->rcv_ram;
+
+ if (lp->eepro == LAN595FX_10ISA) {
+ lp->xmt_lower_limit = XMT_START_10;
+ lp->xmt_upper_limit = (lp->xmt_ram - 2);
+ lp->rcv_lower_limit = lp->xmt_ram;
+ lp->rcv_upper_limit = (RAM_SIZE - 2);
+ }
+ else {
+ lp->rcv_lower_limit = RCV_START_PRO;
+ lp->rcv_upper_limit = (lp->rcv_ram - 2);
+ lp->xmt_lower_limit = lp->rcv_ram;
+ lp->xmt_upper_limit = (RAM_SIZE - 2);
+ }
+}
+
+/* prints boot-time info */
+static void __init eepro_print_info (struct net_device *dev)
+{
+ struct eepro_local * lp = netdev_priv(dev);
+ int i;
+ const char * ifmap[] = {"AUI", "10Base2", "10BaseT"};
+
+ i = inb(dev->base_addr + ID_REG);
+ printk(KERN_DEBUG " id: %#x ",i);
+ printk(" io: %#x ", (unsigned)dev->base_addr);
+
+ switch (lp->eepro) {
+ case LAN595FX_10ISA:
+ printk("%s: Intel EtherExpress 10 ISA\n at %#x,",
+ dev->name, (unsigned)dev->base_addr);
+ break;
+ case LAN595FX:
+ printk("%s: Intel EtherExpress Pro/10+ ISA\n at %#x,",
+ dev->name, (unsigned)dev->base_addr);
+ break;
+ case LAN595TX:
+ printk("%s: Intel EtherExpress Pro/10 ISA at %#x,",
+ dev->name, (unsigned)dev->base_addr);
+ break;
+ case LAN595:
+ printk("%s: Intel 82595-based lan card at %#x,",
+ dev->name, (unsigned)dev->base_addr);
+ break;
+ }
+
+ printk(" %pM", dev->dev_addr);
+
+ if (net_debug > 3)
+ printk(KERN_DEBUG ", %dK RCV buffer",
+ (int)(lp->rcv_ram)/1024);
+
+ if (dev->irq > 2)
+ printk(", IRQ %d, %s.\n", dev->irq, ifmap[dev->if_port]);
+ else
+ printk(", %s.\n", ifmap[dev->if_port]);
+
+ if (net_debug > 3) {
+ i = lp->word[5];
+ if (i & 0x2000) /* bit 13 of EEPROM word 5 */
+ printk(KERN_DEBUG "%s: Concurrent Processing is "
+ "enabled but not used!\n", dev->name);
+ }
+
+ /* Check the station address for the manufacturer's code */
+ if (net_debug>3)
+ printEEPROMInfo(dev);
+}
+
+static const struct ethtool_ops eepro_ethtool_ops;
+
+static const struct net_device_ops eepro_netdev_ops = {
+ .ndo_open = eepro_open,
+ .ndo_stop = eepro_close,
+ .ndo_start_xmit = eepro_send_packet,
+ .ndo_set_rx_mode = set_multicast_list,
+ .ndo_tx_timeout = eepro_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/* This is the real probe routine. Linux has a history of friendly device
+ probes on the ISA bus. A good device probe avoids doing writes, and
+ verifies that the correct device exists and functions. */
+
+static int __init eepro_probe1(struct net_device *dev, int autoprobe)
+{
+ unsigned short station_addr[3], id, counter;
+ int i;
+ struct eepro_local *lp;
+ int ioaddr = dev->base_addr;
+ int err;
+
+ /* Grab the region so we can find another board if autoIRQ fails. */
+ if (!request_region(ioaddr, EEPRO_IO_EXTENT, DRV_NAME)) {
+ if (!autoprobe)
+ printk(KERN_WARNING "EEPRO: io-port 0x%04x in use\n",
+ ioaddr);
+ return -EBUSY;
+ }
+
+ /* Now, we are going to check for the signature of the
+ ID_REG (register 2 of bank 0) */
+
+ id = inb(ioaddr + ID_REG);
+
+ if ((id & ID_REG_MASK) != ID_REG_SIG)
+ goto exit;
+
+ /* We seem to have the 82595 signature, let's
+ play with its counter (last 2 bits of
+ register 2 of bank 0) to be sure. */
+
+ counter = id & R_ROBIN_BITS;
+
+ if ((inb(ioaddr + ID_REG) & R_ROBIN_BITS) != (counter + 0x40))
+ goto exit;
+
+ lp = netdev_priv(dev);
+ memset(lp, 0, sizeof(struct eepro_local));
+ lp->xmt_bar = XMT_BAR_PRO;
+ lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_PRO;
+ lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_PRO;
+ lp->eeprom_reg = EEPROM_REG_PRO;
+ spin_lock_init(&lp->lock);
+
+ /* Now, get the ethernet hardware address from
+ the EEPROM */
+ station_addr[0] = read_eeprom(ioaddr, 2, dev);
+
+ /* FIXME - find another way to know that we've found
+ * an Etherexpress 10
+ */
+ if (station_addr[0] == 0x0000 || station_addr[0] == 0xffff) {
+ lp->eepro = LAN595FX_10ISA;
+ lp->eeprom_reg = EEPROM_REG_10;
+ lp->xmt_lower_limit_reg = XMT_LOWER_LIMIT_REG_10;
+ lp->xmt_upper_limit_reg = XMT_UPPER_LIMIT_REG_10;
+ lp->xmt_bar = XMT_BAR_10;
+ station_addr[0] = read_eeprom(ioaddr, 2, dev);
+ }
+
+ /* get all words at once. will be used here and for ethtool */
+ for (i = 0; i < 8; i++) {
+ lp->word[i] = read_eeprom(ioaddr, i, dev);
+ }
+ station_addr[1] = lp->word[3];
+ station_addr[2] = lp->word[4];
+
+ if (!lp->eepro) {
+ if (lp->word[7] == ee_FX_INT2IRQ)
+ lp->eepro = 2;
+ else if (station_addr[2] == SA_ADDR1)
+ lp->eepro = 1;
+ }
+
+ /* Fill in the 'dev' fields. */
+ for (i=0; i < 6; i++)
+ dev->dev_addr[i] = ((unsigned char *) station_addr)[5-i];
+
+ /* RX buffer must be more than 3K and less than 29K */
+ if (dev->mem_end < 3072 || dev->mem_end > 29696)
+ lp->rcv_ram = RCV_DEFAULT_RAM;
+
+ /* calculate {xmt,rcv}_{lower,upper}_limit */
+ eepro_recalc(dev);
+
+ if (GetBit(lp->word[5], ee_BNC_TPE))
+ dev->if_port = BNC;
+ else
+ dev->if_port = TPE;
+
+ if (dev->irq < 2 && lp->eepro != 0) {
+ /* Mask off INT number */
+ int count = lp->word[1] & 7;
+ unsigned irqMask = lp->word[7];
+
+ while (count--)
+ irqMask &= irqMask - 1;
+
+ count = ffs(irqMask);
+
+ if (count)
+ dev->irq = count - 1;
+
+ if (dev->irq < 2) {
+ printk(KERN_ERR " Duh! illegal interrupt vector stored in EEPROM.\n");
+ goto exit;
+ } else if (dev->irq == 2) {
+ dev->irq = 9;
+ }
+ }
+
+ dev->netdev_ops = &eepro_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->ethtool_ops = &eepro_ethtool_ops;
+
+ /* print boot time info */
+ eepro_print_info(dev);
+
+ /* reset 82595 */
+ eepro_reset(ioaddr);
+
+ err = register_netdev(dev);
+ if (err)
+ goto err;
+ return 0;
+exit:
+ err = -ENODEV;
+err:
+ release_region(dev->base_addr, EEPRO_IO_EXTENT);
+ return err;
+}
+
+/* Open/initialize the board. This is called (in the current kernel)
+ sometime after booting when the 'ifconfig' program is run.
+
+ This routine should set everything up anew at each open, even
+ registers that "should" only need to be set once at boot, so that
+ there is non-reboot way to recover if something goes wrong.
+ */
+
+static const char irqrmap[] = {-1,-1,0,1,-1,2,-1,-1,-1,0,3,4,-1,-1,-1,-1};
+static const char irqrmap2[] = {-1,-1,4,0,1,2,-1,3,-1,4,5,6,7,-1,-1,-1};
+static int eepro_grab_irq(struct net_device *dev)
+{
+ static const int irqlist[] = { 3, 4, 5, 7, 9, 10, 11, 12, 0 };
+ const int *irqp = irqlist;
+ int temp_reg, ioaddr = dev->base_addr;
+
+ eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
+
+ /* Enable the interrupt line. */
+ eepro_en_intline(ioaddr);
+
+ /* be CAREFUL, BANK 0 now */
+ eepro_sw2bank0(ioaddr);
+
+ /* clear all interrupts */
+ eepro_clear_int(ioaddr);
+
+ /* Let EXEC event to interrupt */
+ eepro_en_intexec(ioaddr);
+
+ do {
+ eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
+
+ temp_reg = inb(ioaddr + INT_NO_REG);
+ outb((temp_reg & 0xf8) | irqrmap[*irqp], ioaddr + INT_NO_REG);
+
+ eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
+
+ if (request_irq (*irqp, NULL, IRQF_SHARED, "bogus", dev) != EBUSY) {
+ unsigned long irq_mask;
+ /* Twinkle the interrupt, and check if it's seen */
+ irq_mask = probe_irq_on();
+
+ eepro_diag(ioaddr); /* RESET the 82595 */
+ mdelay(20);
+
+ if (*irqp == probe_irq_off(irq_mask)) /* It's a good IRQ line */
+ break;
+
+ /* clear all interrupts */
+ eepro_clear_int(ioaddr);
+ }
+ } while (*++irqp);
+
+ eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */
+
+ /* Disable the physical interrupt line. */
+ eepro_dis_intline(ioaddr);
+
+ eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
+
+ /* Mask all the interrupts. */
+ eepro_dis_int(ioaddr);
+
+ /* clear all interrupts */
+ eepro_clear_int(ioaddr);
+
+ return dev->irq;
+}
+
+static int eepro_open(struct net_device *dev)
+{
+ unsigned short temp_reg, old8, old9;
+ int irqMask;
+ int i, ioaddr = dev->base_addr;
+ struct eepro_local *lp = netdev_priv(dev);
+
+ if (net_debug > 3)
+ printk(KERN_DEBUG "%s: entering eepro_open routine.\n", dev->name);
+
+ irqMask = lp->word[7];
+
+ if (lp->eepro == LAN595FX_10ISA) {
+ if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 3;\n");
+ }
+ else if (irqMask == ee_FX_INT2IRQ) /* INT to IRQ Mask */
+ {
+ lp->eepro = 2; /* Yes, an Intel EtherExpress Pro/10+ */
+ if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 2;\n");
+ }
+
+ else if ((dev->dev_addr[0] == SA_ADDR0 &&
+ dev->dev_addr[1] == SA_ADDR1 &&
+ dev->dev_addr[2] == SA_ADDR2))
+ {
+ lp->eepro = 1;
+ if (net_debug > 3) printk(KERN_DEBUG "p->eepro = 1;\n");
+ } /* Yes, an Intel EtherExpress Pro/10 */
+
+ else lp->eepro = 0; /* No, it is a generic 82585 lan card */
+
+ /* Get the interrupt vector for the 82595 */
+ if (dev->irq < 2 && eepro_grab_irq(dev) == 0) {
+ printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
+ return -EAGAIN;
+ }
+
+ if (request_irq(dev->irq , eepro_interrupt, 0, dev->name, dev)) {
+ printk(KERN_ERR "%s: unable to get IRQ %d.\n", dev->name, dev->irq);
+ return -EAGAIN;
+ }
+
+ /* Initialize the 82595. */
+
+ eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
+ temp_reg = inb(ioaddr + lp->eeprom_reg);
+
+ lp->stepping = temp_reg >> 5; /* Get the stepping number of the 595 */
+
+ if (net_debug > 3)
+ printk(KERN_DEBUG "The stepping of the 82595 is %d\n", lp->stepping);
+
+ if (temp_reg & 0x10) /* Check the TurnOff Enable bit */
+ outb(temp_reg & 0xef, ioaddr + lp->eeprom_reg);
+ for (i=0; i < 6; i++)
+ outb(dev->dev_addr[i] , ioaddr + I_ADD_REG0 + i);
+
+ temp_reg = inb(ioaddr + REG1); /* Setup Transmit Chaining */
+ outb(temp_reg | XMT_Chain_Int | XMT_Chain_ErrStop /* and discard bad RCV frames */
+ | RCV_Discard_BadFrame, ioaddr + REG1);
+
+ temp_reg = inb(ioaddr + REG2); /* Match broadcast */
+ outb(temp_reg | 0x14, ioaddr + REG2);
+
+ temp_reg = inb(ioaddr + REG3);
+ outb(temp_reg & 0x3f, ioaddr + REG3); /* clear test mode */
+
+ /* Set the receiving mode */
+ eepro_sw2bank1(ioaddr); /* be CAREFUL, BANK 1 now */
+
+ /* Set the interrupt vector */
+ temp_reg = inb(ioaddr + INT_NO_REG);
+ if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA)
+ outb((temp_reg & 0xf8) | irqrmap2[dev->irq], ioaddr + INT_NO_REG);
+ else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);
+
+
+ temp_reg = inb(ioaddr + INT_NO_REG);
+ if (lp->eepro == LAN595FX || lp->eepro == LAN595FX_10ISA)
+ outb((temp_reg & 0xf0) | irqrmap2[dev->irq] | 0x08,ioaddr+INT_NO_REG);
+ else outb((temp_reg & 0xf8) | irqrmap[dev->irq], ioaddr + INT_NO_REG);
+
+ if (net_debug > 3)
+ printk(KERN_DEBUG "eepro_open: content of INT Reg is %x\n", temp_reg);
+
+
+ /* Initialize the RCV and XMT upper and lower limits */
+ outb(lp->rcv_lower_limit >> 8, ioaddr + RCV_LOWER_LIMIT_REG);
+ outb(lp->rcv_upper_limit >> 8, ioaddr + RCV_UPPER_LIMIT_REG);
+ outb(lp->xmt_lower_limit >> 8, ioaddr + lp->xmt_lower_limit_reg);
+ outb(lp->xmt_upper_limit >> 8, ioaddr + lp->xmt_upper_limit_reg);
+
+ /* Enable the interrupt line. */
+ eepro_en_intline(ioaddr);
+
+ /* Switch back to Bank 0 */
+ eepro_sw2bank0(ioaddr);
+
+ /* Let RX and TX events to interrupt */
+ eepro_en_int(ioaddr);
+
+ /* clear all interrupts */
+ eepro_clear_int(ioaddr);
+
+ /* Initialize RCV */
+ outw(lp->rcv_lower_limit, ioaddr + RCV_BAR);
+ lp->rx_start = lp->rcv_lower_limit;
+ outw(lp->rcv_upper_limit | 0xfe, ioaddr + RCV_STOP);
+
+ /* Initialize XMT */
+ outw(lp->xmt_lower_limit, ioaddr + lp->xmt_bar);
+ lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
+ lp->tx_last = 0;
+
+ /* Check for the i82595TX and i82595FX */
+ old8 = inb(ioaddr + 8);
+ outb(~old8, ioaddr + 8);
+
+ if ((temp_reg = inb(ioaddr + 8)) == old8) {
+ if (net_debug > 3)
+ printk(KERN_DEBUG "i82595 detected!\n");
+ lp->version = LAN595;
+ }
+ else {
+ lp->version = LAN595TX;
+ outb(old8, ioaddr + 8);
+ old9 = inb(ioaddr + 9);
+
+ if (irqMask==ee_FX_INT2IRQ) {
+ if (net_debug > 3) {
+ printk(KERN_DEBUG "IrqMask: %#x\n",irqMask);
+ printk(KERN_DEBUG "i82595FX detected!\n");
+ }
+ lp->version = LAN595FX;
+ outb(old9, ioaddr + 9);
+ if (dev->if_port != TPE) { /* Hopefully, this will fix the
+ problem of using Pentiums and
+ pro/10 w/ BNC. */
+ eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
+ temp_reg = inb(ioaddr + REG13);
+ /* disable the full duplex mode since it is not
+ applicable with the 10Base2 cable. */
+ outb(temp_reg & ~(FDX | A_N_ENABLE), REG13);
+ eepro_sw2bank0(ioaddr); /* be CAREFUL, BANK 0 now */
+ }
+ }
+ else if (net_debug > 3) {
+ printk(KERN_DEBUG "temp_reg: %#x ~old9: %#x\n",temp_reg,((~old9)&0xff));
+ printk(KERN_DEBUG "i82595TX detected!\n");
+ }
+ }
+
+ eepro_sel_reset(ioaddr);
+
+ netif_start_queue(dev);
+
+ if (net_debug > 3)
+ printk(KERN_DEBUG "%s: exiting eepro_open routine.\n", dev->name);
+
+ /* enabling rx */
+ eepro_en_rx(ioaddr);
+
+ return 0;
+}
+
+static void eepro_tx_timeout (struct net_device *dev)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ /* if (net_debug > 1) */
+ printk (KERN_ERR "%s: transmit timed out, %s?\n", dev->name,
+ "network cable problem");
+ /* This is not a duplicate. One message for the console,
+ one for the log file */
+ printk (KERN_DEBUG "%s: transmit timed out, %s?\n", dev->name,
+ "network cable problem");
+ eepro_complete_selreset(ioaddr);
+}
+
+
+static netdev_tx_t eepro_send_packet(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+ unsigned long flags;
+ int ioaddr = dev->base_addr;
+ short length = skb->len;
+
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: entering eepro_send_packet routine.\n", dev->name);
+
+ if (length < ETH_ZLEN) {
+ if (skb_padto(skb, ETH_ZLEN))
+ return NETDEV_TX_OK;
+ length = ETH_ZLEN;
+ }
+ netif_stop_queue (dev);
+
+ eepro_dis_int(ioaddr);
+ spin_lock_irqsave(&lp->lock, flags);
+
+ {
+ unsigned char *buf = skb->data;
+
+ if (hardware_send_packet(dev, buf, length))
+ /* we won't wake queue here because we're out of space */
+ dev->stats.tx_dropped++;
+ else {
+ dev->stats.tx_bytes+=skb->len;
+ netif_wake_queue(dev);
+ }
+
+ }
+
+ dev_kfree_skb (skb);
+
+ /* You might need to clean up and record Tx statistics here. */
+ /* dev->stats.tx_aborted_errors++; */
+
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: exiting eepro_send_packet routine.\n", dev->name);
+
+ eepro_en_int(ioaddr);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ return NETDEV_TX_OK;
+}
+
+
+/* The typical workload of the driver:
+ Handle the network interface interrupts. */
+
+static irqreturn_t
+eepro_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct eepro_local *lp;
+ int ioaddr, status, boguscount = 20;
+ int handled = 0;
+
+ lp = netdev_priv(dev);
+
+ spin_lock(&lp->lock);
+
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: entering eepro_interrupt routine.\n", dev->name);
+
+ ioaddr = dev->base_addr;
+
+ while (((status = inb(ioaddr + STATUS_REG)) & (RX_INT|TX_INT)) && (boguscount--))
+ {
+ handled = 1;
+ if (status & RX_INT) {
+ if (net_debug > 4)
+ printk(KERN_DEBUG "%s: packet received interrupt.\n", dev->name);
+
+ eepro_dis_int(ioaddr);
+
+ /* Get the received packets */
+ eepro_ack_rx(ioaddr);
+ eepro_rx(dev);
+
+ eepro_en_int(ioaddr);
+ }
+ if (status & TX_INT) {
+ if (net_debug > 4)
+ printk(KERN_DEBUG "%s: packet transmit interrupt.\n", dev->name);
+
+
+ eepro_dis_int(ioaddr);
+
+ /* Process the status of transmitted packets */
+ eepro_ack_tx(ioaddr);
+ eepro_transmit_interrupt(dev);
+
+ eepro_en_int(ioaddr);
+ }
+ }
+
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: exiting eepro_interrupt routine.\n", dev->name);
+
+ spin_unlock(&lp->lock);
+ return IRQ_RETVAL(handled);
+}
+
+static int eepro_close(struct net_device *dev)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ short temp_reg;
+
+ netif_stop_queue(dev);
+
+ eepro_sw2bank1(ioaddr); /* Switch back to Bank 1 */
+
+ /* Disable the physical interrupt line. */
+ temp_reg = inb(ioaddr + REG1);
+ outb(temp_reg & 0x7f, ioaddr + REG1);
+
+ eepro_sw2bank0(ioaddr); /* Switch back to Bank 0 */
+
+ /* Flush the Tx and disable Rx. */
+ outb(STOP_RCV_CMD, ioaddr);
+ lp->tx_start = lp->tx_end = lp->xmt_lower_limit;
+ lp->tx_last = 0;
+
+ /* Mask all the interrupts. */
+ eepro_dis_int(ioaddr);
+
+ /* clear all interrupts */
+ eepro_clear_int(ioaddr);
+
+ /* Reset the 82595 */
+ eepro_reset(ioaddr);
+
+ /* release the interrupt */
+ free_irq(dev->irq, dev);
+
+ /* Update the statistics here. What statistics? */
+
+ return 0;
+}
+
+/* Set or clear the multicast filter for this adaptor.
+ */
+static void
+set_multicast_list(struct net_device *dev)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+ short ioaddr = dev->base_addr;
+ unsigned short mode;
+ struct netdev_hw_addr *ha;
+ int mc_count = netdev_mc_count(dev);
+
+ if (dev->flags&(IFF_ALLMULTI|IFF_PROMISC) || mc_count > 63)
+ {
+ eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
+ mode = inb(ioaddr + REG2);
+ outb(mode | PRMSC_Mode, ioaddr + REG2);
+ mode = inb(ioaddr + REG3);
+ outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
+ eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
+ }
+
+ else if (mc_count == 0)
+ {
+ eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
+ mode = inb(ioaddr + REG2);
+ outb(mode & 0xd6, ioaddr + REG2); /* Turn off Multi-IA and PRMSC_Mode bits */
+ mode = inb(ioaddr + REG3);
+ outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
+ eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
+ }
+
+ else
+ {
+ unsigned short status, *eaddrs;
+ int i, boguscount = 0;
+
+ /* Disable RX and TX interrupts. Necessary to avoid
+ corruption of the HOST_ADDRESS_REG by interrupt
+ service routines. */
+ eepro_dis_int(ioaddr);
+
+ eepro_sw2bank2(ioaddr); /* be CAREFUL, BANK 2 now */
+ mode = inb(ioaddr + REG2);
+ outb(mode | Multi_IA, ioaddr + REG2);
+ mode = inb(ioaddr + REG3);
+ outb(mode, ioaddr + REG3); /* writing reg. 3 to complete the update */
+ eepro_sw2bank0(ioaddr); /* Return to BANK 0 now */
+ outw(lp->tx_end, ioaddr + HOST_ADDRESS_REG);
+ outw(MC_SETUP, ioaddr + IO_PORT);
+ outw(0, ioaddr + IO_PORT);
+ outw(0, ioaddr + IO_PORT);
+ outw(6 * (mc_count + 1), ioaddr + IO_PORT);
+
+ netdev_for_each_mc_addr(ha, dev) {
+ eaddrs = (unsigned short *) ha->addr;
+ outw(*eaddrs++, ioaddr + IO_PORT);
+ outw(*eaddrs++, ioaddr + IO_PORT);
+ outw(*eaddrs++, ioaddr + IO_PORT);
+ }
+
+ eaddrs = (unsigned short *) dev->dev_addr;
+ outw(eaddrs[0], ioaddr + IO_PORT);
+ outw(eaddrs[1], ioaddr + IO_PORT);
+ outw(eaddrs[2], ioaddr + IO_PORT);
+ outw(lp->tx_end, ioaddr + lp->xmt_bar);
+ outb(MC_SETUP, ioaddr);
+
+ /* Update the transmit queue */
+ i = lp->tx_end + XMT_HEADER + 6 * (mc_count + 1);
+
+ if (lp->tx_start != lp->tx_end)
+ {
+ /* update the next address and the chain bit in the
+ last packet */
+ outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
+ outw(i, ioaddr + IO_PORT);
+ outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
+ status = inw(ioaddr + IO_PORT);
+ outw(status | CHAIN_BIT, ioaddr + IO_PORT);
+ lp->tx_end = i ;
+ }
+ else {
+ lp->tx_start = lp->tx_end = i ;
+ }
+
+ /* Acknowledge that the MC setup is done */
+ do { /* We should be doing this in the eepro_interrupt()! */
+ SLOW_DOWN;
+ SLOW_DOWN;
+ if (inb(ioaddr + STATUS_REG) & 0x08)
+ {
+ i = inb(ioaddr);
+ outb(0x08, ioaddr + STATUS_REG);
+
+ if (i & 0x20) { /* command ABORTed */
+ printk(KERN_NOTICE "%s: multicast setup failed.\n",
+ dev->name);
+ break;
+ } else if ((i & 0x0f) == 0x03) { /* MC-Done */
+ printk(KERN_DEBUG "%s: set Rx mode to %d address%s.\n",
+ dev->name, mc_count,
+ mc_count > 1 ? "es":"");
+ break;
+ }
+ }
+ } while (++boguscount < 100);
+
+ /* Re-enable RX and TX interrupts */
+ eepro_en_int(ioaddr);
+ }
+ if (lp->eepro == LAN595FX_10ISA) {
+ eepro_complete_selreset(ioaddr);
+ }
+ else
+ eepro_en_rx(ioaddr);
+}
+
+/* The horrible routine to read a word from the serial EEPROM. */
+/* IMPORTANT - the 82595 will be set to Bank 0 after the eeprom is read */
+
+/* The delay between EEPROM clock transitions. */
+#define eeprom_delay() { udelay(40); }
+#define EE_READ_CMD (6 << 6)
+
+static int
+read_eeprom(int ioaddr, int location, struct net_device *dev)
+{
+ int i;
+ unsigned short retval = 0;
+ struct eepro_local *lp = netdev_priv(dev);
+ short ee_addr = ioaddr + lp->eeprom_reg;
+ int read_cmd = location | EE_READ_CMD;
+ short ctrl_val = EECS ;
+
+ /* XXXX - black magic */
+ eepro_sw2bank1(ioaddr);
+ outb(0x00, ioaddr + STATUS_REG);
+ /* XXXX - black magic */
+
+ eepro_sw2bank2(ioaddr);
+ outb(ctrl_val, ee_addr);
+
+ /* Shift the read command bits out. */
+ for (i = 8; i >= 0; i--) {
+ short outval = (read_cmd & (1 << i)) ? ctrl_val | EEDI
+ : ctrl_val;
+ outb(outval, ee_addr);
+ outb(outval | EESK, ee_addr); /* EEPROM clock tick. */
+ eeprom_delay();
+ outb(outval, ee_addr); /* Finish EEPROM a clock tick. */
+ eeprom_delay();
+ }
+ outb(ctrl_val, ee_addr);
+
+ for (i = 16; i > 0; i--) {
+ outb(ctrl_val | EESK, ee_addr); eeprom_delay();
+ retval = (retval << 1) | ((inb(ee_addr) & EEDO) ? 1 : 0);
+ outb(ctrl_val, ee_addr); eeprom_delay();
+ }
+
+ /* Terminate the EEPROM access. */
+ ctrl_val &= ~EECS;
+ outb(ctrl_val | EESK, ee_addr);
+ eeprom_delay();
+ outb(ctrl_val, ee_addr);
+ eeprom_delay();
+ eepro_sw2bank0(ioaddr);
+ return retval;
+}
+
+static int
+hardware_send_packet(struct net_device *dev, void *buf, short length)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+ short ioaddr = dev->base_addr;
+ unsigned status, tx_available, last, end;
+
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: entering hardware_send_packet routine.\n", dev->name);
+
+ /* determine how much of the transmit buffer space is available */
+ if (lp->tx_end > lp->tx_start)
+ tx_available = lp->xmt_ram - (lp->tx_end - lp->tx_start);
+ else if (lp->tx_end < lp->tx_start)
+ tx_available = lp->tx_start - lp->tx_end;
+ else tx_available = lp->xmt_ram;
+
+ if (((((length + 3) >> 1) << 1) + 2*XMT_HEADER) >= tx_available) {
+ /* No space available ??? */
+ return 1;
+ }
+
+ last = lp->tx_end;
+ end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
+
+ if (end >= lp->xmt_upper_limit + 2) { /* the transmit buffer is wrapped around */
+ if ((lp->xmt_upper_limit + 2 - last) <= XMT_HEADER) {
+ /* Arrrr!!!, must keep the xmt header together,
+ several days were lost to chase this one down. */
+ last = lp->xmt_lower_limit;
+ end = last + (((length + 3) >> 1) << 1) + XMT_HEADER;
+ }
+ else end = lp->xmt_lower_limit + (end -
+ lp->xmt_upper_limit + 2);
+ }
+
+ outw(last, ioaddr + HOST_ADDRESS_REG);
+ outw(XMT_CMD, ioaddr + IO_PORT);
+ outw(0, ioaddr + IO_PORT);
+ outw(end, ioaddr + IO_PORT);
+ outw(length, ioaddr + IO_PORT);
+
+ if (lp->version == LAN595)
+ outsw(ioaddr + IO_PORT, buf, (length + 3) >> 1);
+ else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
+ unsigned short temp = inb(ioaddr + INT_MASK_REG);
+ outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG);
+ outsl(ioaddr + IO_PORT_32_BIT, buf, (length + 3) >> 2);
+ outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG);
+ }
+
+ /* A dummy read to flush the DRAM write pipeline */
+ status = inw(ioaddr + IO_PORT);
+
+ if (lp->tx_start == lp->tx_end) {
+ outw(last, ioaddr + lp->xmt_bar);
+ outb(XMT_CMD, ioaddr);
+ lp->tx_start = last; /* I don't like to change tx_start here */
+ }
+ else {
+ /* update the next address and the chain bit in the
+ last packet */
+
+ if (lp->tx_end != last) {
+ outw(lp->tx_last + XMT_CHAIN, ioaddr + HOST_ADDRESS_REG);
+ outw(last, ioaddr + IO_PORT);
+ }
+
+ outw(lp->tx_last + XMT_COUNT, ioaddr + HOST_ADDRESS_REG);
+ status = inw(ioaddr + IO_PORT);
+ outw(status | CHAIN_BIT, ioaddr + IO_PORT);
+
+ /* Continue the transmit command */
+ outb(RESUME_XMT_CMD, ioaddr);
+ }
+
+ lp->tx_last = last;
+ lp->tx_end = end;
+
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: exiting hardware_send_packet routine.\n", dev->name);
+
+ return 0;
+}
+
+static void
+eepro_rx(struct net_device *dev)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+ short ioaddr = dev->base_addr;
+ short boguscount = 20;
+ short rcv_car = lp->rx_start;
+ unsigned rcv_event, rcv_status, rcv_next_frame, rcv_size;
+
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: entering eepro_rx routine.\n", dev->name);
+
+ /* Set the read pointer to the start of the RCV */
+ outw(rcv_car, ioaddr + HOST_ADDRESS_REG);
+
+ rcv_event = inw(ioaddr + IO_PORT);
+
+ while (rcv_event == RCV_DONE) {
+
+ rcv_status = inw(ioaddr + IO_PORT);
+ rcv_next_frame = inw(ioaddr + IO_PORT);
+ rcv_size = inw(ioaddr + IO_PORT);
+
+ if ((rcv_status & (RX_OK | RX_ERROR)) == RX_OK) {
+
+ /* Malloc up new buffer. */
+ struct sk_buff *skb;
+
+ dev->stats.rx_bytes+=rcv_size;
+ rcv_size &= 0x3fff;
+ skb = dev_alloc_skb(rcv_size+5);
+ if (skb == NULL) {
+ printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
+ dev->stats.rx_dropped++;
+ rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
+ lp->rx_start = rcv_next_frame;
+ outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
+
+ break;
+ }
+ skb_reserve(skb,2);
+
+ if (lp->version == LAN595)
+ insw(ioaddr+IO_PORT, skb_put(skb,rcv_size), (rcv_size + 3) >> 1);
+ else { /* LAN595TX or LAN595FX, capable of 32-bit I/O processing */
+ unsigned short temp = inb(ioaddr + INT_MASK_REG);
+ outb(temp | IO_32_BIT, ioaddr + INT_MASK_REG);
+ insl(ioaddr+IO_PORT_32_BIT, skb_put(skb,rcv_size),
+ (rcv_size + 3) >> 2);
+ outb(temp & ~(IO_32_BIT), ioaddr + INT_MASK_REG);
+ }
+
+ skb->protocol = eth_type_trans(skb,dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ }
+
+ else { /* Not sure will ever reach here,
+ I set the 595 to discard bad received frames */
+ dev->stats.rx_errors++;
+
+ if (rcv_status & 0x0100)
+ dev->stats.rx_over_errors++;
+
+ else if (rcv_status & 0x0400)
+ dev->stats.rx_frame_errors++;
+
+ else if (rcv_status & 0x0800)
+ dev->stats.rx_crc_errors++;
+
+ printk(KERN_DEBUG "%s: event = %#x, status = %#x, next = %#x, size = %#x\n",
+ dev->name, rcv_event, rcv_status, rcv_next_frame, rcv_size);
+ }
+
+ if (rcv_status & 0x1000)
+ dev->stats.rx_length_errors++;
+
+ rcv_car = lp->rx_start + RCV_HEADER + rcv_size;
+ lp->rx_start = rcv_next_frame;
+
+ if (--boguscount == 0)
+ break;
+
+ outw(rcv_next_frame, ioaddr + HOST_ADDRESS_REG);
+ rcv_event = inw(ioaddr + IO_PORT);
+
+ }
+ if (rcv_car == 0)
+ rcv_car = lp->rcv_upper_limit | 0xff;
+
+ outw(rcv_car - 1, ioaddr + RCV_STOP);
+
+ if (net_debug > 5)
+ printk(KERN_DEBUG "%s: exiting eepro_rx routine.\n", dev->name);
+}
+
+static void
+eepro_transmit_interrupt(struct net_device *dev)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+ short ioaddr = dev->base_addr;
+ short boguscount = 25;
+ short xmt_status;
+
+ while ((lp->tx_start != lp->tx_end) && boguscount--) {
+
+ outw(lp->tx_start, ioaddr + HOST_ADDRESS_REG);
+ xmt_status = inw(ioaddr+IO_PORT);
+
+ if (!(xmt_status & TX_DONE_BIT))
+ break;
+
+ xmt_status = inw(ioaddr+IO_PORT);
+ lp->tx_start = inw(ioaddr+IO_PORT);
+
+ netif_wake_queue (dev);
+
+ if (xmt_status & TX_OK)
+ dev->stats.tx_packets++;
+ else {
+ dev->stats.tx_errors++;
+ if (xmt_status & 0x0400) {
+ dev->stats.tx_carrier_errors++;
+ printk(KERN_DEBUG "%s: carrier error\n",
+ dev->name);
+ printk(KERN_DEBUG "%s: XMT status = %#x\n",
+ dev->name, xmt_status);
+ }
+ else {
+ printk(KERN_DEBUG "%s: XMT status = %#x\n",
+ dev->name, xmt_status);
+ printk(KERN_DEBUG "%s: XMT status = %#x\n",
+ dev->name, xmt_status);
+ }
+ }
+ if (xmt_status & 0x000f) {
+ dev->stats.collisions += (xmt_status & 0x000f);
+ }
+
+ if ((xmt_status & 0x0040) == 0x0) {
+ dev->stats.tx_heartbeat_errors++;
+ }
+ }
+}
+
+static int eepro_ethtool_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct eepro_local *lp = netdev_priv(dev);
+
+ cmd->supported = SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_Autoneg;
+ cmd->advertising = ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_Autoneg;
+
+ if (GetBit(lp->word[5], ee_PortTPE)) {
+ cmd->supported |= SUPPORTED_TP;
+ cmd->advertising |= ADVERTISED_TP;
+ }
+ if (GetBit(lp->word[5], ee_PortBNC)) {
+ cmd->supported |= SUPPORTED_BNC;
+ cmd->advertising |= ADVERTISED_BNC;
+ }
+ if (GetBit(lp->word[5], ee_PortAUI)) {
+ cmd->supported |= SUPPORTED_AUI;
+ cmd->advertising |= ADVERTISED_AUI;
+ }
+
+ ethtool_cmd_speed_set(cmd, SPEED_10);
+
+ if (dev->if_port == TPE && lp->word[1] & ee_Duplex) {
+ cmd->duplex = DUPLEX_FULL;
+ }
+ else {
+ cmd->duplex = DUPLEX_HALF;
+ }
+
+ cmd->port = dev->if_port;
+ cmd->phy_address = dev->base_addr;
+ cmd->transceiver = XCVR_INTERNAL;
+
+ if (lp->word[0] & ee_AutoNeg) {
+ cmd->autoneg = 1;
+ }
+
+ return 0;
+}
+
+static void eepro_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ strcpy(drvinfo->driver, DRV_NAME);
+ strcpy(drvinfo->version, DRV_VERSION);
+ sprintf(drvinfo->bus_info, "ISA 0x%lx", dev->base_addr);
+}
+
+static const struct ethtool_ops eepro_ethtool_ops = {
+ .get_settings = eepro_ethtool_get_settings,
+ .get_drvinfo = eepro_ethtool_get_drvinfo,
+};
+
+#ifdef MODULE
+
+#define MAX_EEPRO 8
+static struct net_device *dev_eepro[MAX_EEPRO];
+
+static int io[MAX_EEPRO] = {
+ [0 ... MAX_EEPRO-1] = -1
+};
+static int irq[MAX_EEPRO];
+static int mem[MAX_EEPRO] = { /* Size of the rx buffer in KB */
+ [0 ... MAX_EEPRO-1] = RCV_DEFAULT_RAM/1024
+};
+static int autodetect;
+
+static int n_eepro;
+/* For linux 2.1.xx */
+
+MODULE_AUTHOR("Pascal Dupuis and others");
+MODULE_DESCRIPTION("Intel i82595 ISA EtherExpressPro10/10+ driver");
+MODULE_LICENSE("GPL");
+
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(mem, int, NULL, 0);
+module_param(autodetect, int, 0);
+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
+MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
+MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
+MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");
+
+int __init init_module(void)
+{
+ struct net_device *dev;
+ int i;
+ if (io[0] == -1 && autodetect == 0) {
+ printk(KERN_WARNING "eepro_init_module: Probe is very dangerous in ISA boards!\n");
+ printk(KERN_WARNING "eepro_init_module: Please add \"autodetect=1\" to force probe\n");
+ return -ENODEV;
+ }
+ else if (autodetect) {
+ /* if autodetect is set then we must force detection */
+ for (i = 0; i < MAX_EEPRO; i++) {
+ io[i] = 0;
+ }
+
+ printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
+ }
+
+ for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) {
+ dev = alloc_etherdev(sizeof(struct eepro_local));
+ if (!dev)
+ break;
+
+ dev->mem_end = mem[i];
+ dev->base_addr = io[i];
+ dev->irq = irq[i];
+
+ if (do_eepro_probe(dev) == 0) {
+ dev_eepro[n_eepro++] = dev;
+ continue;
+ }
+ free_netdev(dev);
+ break;
+ }
+
+ if (n_eepro)
+ printk(KERN_INFO "%s", version);
+
+ return n_eepro ? 0 : -ENODEV;
+}
+
+void __exit
+cleanup_module(void)
+{
+ int i;
+
+ for (i=0; i<n_eepro; i++) {
+ struct net_device *dev = dev_eepro[i];
+ unregister_netdev(dev);
+ release_region(dev->base_addr, EEPRO_IO_EXTENT);
+ free_netdev(dev);
+ }
+}
+#endif /* MODULE */