diff options
Diffstat (limited to 'drivers/net/ethernet/i825xx/lp486e.c')
| -rw-r--r-- | drivers/net/ethernet/i825xx/lp486e.c | 1337 |
1 files changed, 0 insertions, 1337 deletions
diff --git a/drivers/net/ethernet/i825xx/lp486e.c b/drivers/net/ethernet/i825xx/lp486e.c deleted file mode 100644 index 3735bfa5360..00000000000 --- a/drivers/net/ethernet/i825xx/lp486e.c +++ /dev/null @@ -1,1337 +0,0 @@ -/* Intel Professional Workstation/panther ethernet driver */ -/* lp486e.c: A panther 82596 ethernet driver for linux. */ -/* - History and copyrights: - - Driver skeleton - Written 1993 by Donald Becker. - Copyright 1993 United States Government as represented by the Director, - National Security Agency. This software may only be used and - distributed according to the terms of the GNU General Public License - as modified by SRC, incorporated herein by reference. - - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Apricot - Written 1994 by Mark Evans. - This driver is for the Apricot 82596 bus-master interface - - Modularised 12/94 Mark Evans - - Professional Workstation - Derived from apricot.c by Ard van Breemen - <ard@murphy.nl>|<ard@cstmel.hobby.nl>|<ard@cstmel.nl.eu.org> - - Credits: - Thanks to Murphy Software BV for letting me write this in their time. - Well, actually, I get paid doing this... - (Also: see http://www.murphy.nl for murphy, and my homepage ~ard for - more information on the Professional Workstation) - - Present version - aeb@cwi.nl -*/ -/* - There are currently two motherboards that I know of in the - professional workstation. The only one that I know is the - intel panther motherboard. -- ard -*/ -/* -The pws is equipped with an intel 82596. This is a very intelligent controller -which runs its own micro-code. Communication with the hostprocessor is done -through linked lists of commands and buffers in the hostprocessors memory. -A complete description of the 82596 is available from intel. Search for -a file called "29021806.pdf". It is a complete description of the chip itself. -To use it for the pws some additions are needed regarding generation of -the PORT and CA signal, and the interrupt glue needed for a pc. -I/O map: -PORT SIZE ACTION MEANING -0xCB0 2 WRITE Lower 16 bits for PORT command -0xCB2 2 WRITE Upper 16 bits for PORT command, and issue of PORT command -0xCB4 1 WRITE Generation of CA signal -0xCB8 1 WRITE Clear interrupt glue -All other communication is through memory! -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/bitops.h> - -#include <asm/io.h> -#include <asm/dma.h> - -#define DRV_NAME "lp486e" - -/* debug print flags */ -#define LOG_SRCDST 0x80000000 -#define LOG_STATINT 0x40000000 -#define LOG_STARTINT 0x20000000 - -#define i596_debug debug - -static int i596_debug = 0; - -static const char * const medianame[] = { - "10baseT", "AUI", - "10baseT-FD", "AUI-FD", -}; - -#define LP486E_TOTAL_SIZE 16 - -#define I596_NULL (0xffffffff) - -#define CMD_EOL 0x8000 /* The last command of the list, stop. */ -#define CMD_SUSP 0x4000 /* Suspend after doing cmd. */ -#define CMD_INTR 0x2000 /* Interrupt after doing cmd. */ - -#define CMD_FLEX 0x0008 /* Enable flexible memory model */ - -enum commands { - CmdNOP = 0, - CmdIASetup = 1, - CmdConfigure = 2, - CmdMulticastList = 3, - CmdTx = 4, - CmdTDR = 5, - CmdDump = 6, - CmdDiagnose = 7 -}; - -#if 0 -static const char *CUcmdnames[8] = { "NOP", "IASetup", "Configure", "MulticastList", - "Tx", "TDR", "Dump", "Diagnose" }; -#endif - -/* Status word bits */ -#define STAT_CX 0x8000 /* The CU finished executing a command - with the Interrupt bit set */ -#define STAT_FR 0x4000 /* The RU finished receiving a frame */ -#define STAT_CNA 0x2000 /* The CU left the active state */ -#define STAT_RNR 0x1000 /* The RU left the active state */ -#define STAT_ACK (STAT_CX | STAT_FR | STAT_CNA | STAT_RNR) -#define STAT_CUS 0x0700 /* Status of CU: 0: idle, 1: suspended, - 2: active, 3-7: unused */ -#define STAT_RUS 0x00f0 /* Status of RU: 0: idle, 1: suspended, - 2: no resources, 4: ready, - 10: no resources due to no more RBDs, - 12: no more RBDs, other: unused */ -#define STAT_T 0x0008 /* Bus throttle timers loaded */ -#define STAT_ZERO 0x0807 /* Always zero */ - -#if 0 -static char *CUstates[8] = { - "idle", "suspended", "active", 0, 0, 0, 0, 0 -}; -static char *RUstates[16] = { - "idle", "suspended", "no resources", 0, "ready", 0, 0, 0, - 0, 0, "no RBDs", 0, "out of RBDs", 0, 0, 0 -}; - -static void -i596_out_status(int status) { - int bad = 0; - char *s; - - printk("status %4.4x:", status); - if (status == 0xffff) - printk(" strange..\n"); - else { - if (status & STAT_CX) - printk(" CU done"); - if (status & STAT_CNA) - printk(" CU stopped"); - if (status & STAT_FR) - printk(" got a frame"); - if (status & STAT_RNR) - printk(" RU stopped"); - if (status & STAT_T) - printk(" throttled"); - if (status & STAT_ZERO) - bad = 1; - s = CUstates[(status & STAT_CUS) >> 8]; - if (!s) - bad = 1; - else - printk(" CU(%s)", s); - s = RUstates[(status & STAT_RUS) >> 4]; - if (!s) - bad = 1; - else - printk(" RU(%s)", s); - if (bad) - printk(" bad status"); - printk("\n"); - } -} -#endif - -/* Command word bits */ -#define ACK_CX 0x8000 -#define ACK_FR 0x4000 -#define ACK_CNA 0x2000 -#define ACK_RNR 0x1000 - -#define CUC_START 0x0100 -#define CUC_RESUME 0x0200 -#define CUC_SUSPEND 0x0300 -#define CUC_ABORT 0x0400 - -#define RX_START 0x0010 -#define RX_RESUME 0x0020 -#define RX_SUSPEND 0x0030 -#define RX_ABORT 0x0040 - -typedef u32 phys_addr; - -static inline phys_addr -va_to_pa(void *x) { - return x ? virt_to_bus(x) : I596_NULL; -} - -static inline void * -pa_to_va(phys_addr x) { - return (x == I596_NULL) ? NULL : bus_to_virt(x); -} - -/* status bits for cmd */ -#define CMD_STAT_C 0x8000 /* CU command complete */ -#define CMD_STAT_B 0x4000 /* CU command in progress */ -#define CMD_STAT_OK 0x2000 /* CU command completed without errors */ -#define CMD_STAT_A 0x1000 /* CU command abnormally terminated */ - -struct i596_cmd { /* 8 bytes */ - unsigned short status; - unsigned short command; - phys_addr pa_next; /* va_to_pa(struct i596_cmd *next) */ -}; - -#define EOF 0x8000 -#define SIZE_MASK 0x3fff - -struct i596_tbd { - unsigned short size; - unsigned short pad; - phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */ - phys_addr pa_data; /* va_to_pa(char *data) */ - struct sk_buff *skb; -}; - -struct tx_cmd { - struct i596_cmd cmd; - phys_addr pa_tbd; /* va_to_pa(struct i596_tbd *tbd) */ - unsigned short size; - unsigned short pad; -}; - -/* status bits for rfd */ -#define RFD_STAT_C 0x8000 /* Frame reception complete */ -#define RFD_STAT_B 0x4000 /* Frame reception in progress */ -#define RFD_STAT_OK 0x2000 /* Frame received without errors */ -#define RFD_STATUS 0x1fff -#define RFD_LENGTH_ERR 0x1000 -#define RFD_CRC_ERR 0x0800 -#define RFD_ALIGN_ERR 0x0400 -#define RFD_NOBUFS_ERR 0x0200 -#define RFD_DMA_ERR 0x0100 /* DMA overrun failure to acquire system bus */ -#define RFD_SHORT_FRAME_ERR 0x0080 -#define RFD_NOEOP_ERR 0x0040 -#define RFD_TRUNC_ERR 0x0020 -#define RFD_MULTICAST 0x0002 /* 0: destination had our address - 1: destination was broadcast/multicast */ -#define RFD_COLLISION 0x0001 - -/* receive frame descriptor */ -struct i596_rfd { - unsigned short stat; - unsigned short cmd; - phys_addr pa_next; /* va_to_pa(struct i596_rfd *next) */ - phys_addr pa_rbd; /* va_to_pa(struct i596_rbd *rbd) */ - unsigned short count; - unsigned short size; - char data[1532]; -}; - -#define RBD_EL 0x8000 -#define RBD_P 0x4000 -#define RBD_SIZEMASK 0x3fff -#define RBD_EOF 0x8000 -#define RBD_F 0x4000 - -/* receive buffer descriptor */ -struct i596_rbd { - unsigned short size; - unsigned short pad; - phys_addr pa_next; /* va_to_pa(struct i596_tbd *next) */ - phys_addr pa_data; /* va_to_pa(char *data) */ - phys_addr pa_prev; /* va_to_pa(struct i596_tbd *prev) */ - - /* Driver private part */ - struct sk_buff *skb; -}; - -#define RX_RING_SIZE 64 -#define RX_SKBSIZE (ETH_FRAME_LEN+10) -#define RX_RBD_SIZE 32 - -/* System Control Block - 40 bytes */ -struct i596_scb { - u16 status; /* 0 */ - u16 command; /* 2 */ - phys_addr pa_cmd; /* 4 - va_to_pa(struct i596_cmd *cmd) */ - phys_addr pa_rfd; /* 8 - va_to_pa(struct i596_rfd *rfd) */ - u32 crc_err; /* 12 */ - u32 align_err; /* 16 */ - u32 resource_err; /* 20 */ - u32 over_err; /* 24 */ - u32 rcvdt_err; /* 28 */ - u32 short_err; /* 32 */ - u16 t_on; /* 36 */ - u16 t_off; /* 38 */ -}; - -/* Intermediate System Configuration Pointer - 8 bytes */ -struct i596_iscp { - u32 busy; /* 0 */ - phys_addr pa_scb; /* 4 - va_to_pa(struct i596_scb *scb) */ -}; - -/* System Configuration Pointer - 12 bytes */ -struct i596_scp { - u32 sysbus; /* 0 */ - u32 pad; /* 4 */ - phys_addr pa_iscp; /* 8 - va_to_pa(struct i596_iscp *iscp) */ -}; - -/* Selftest and dump results - needs 16-byte alignment */ -/* - * The size of the dump area is 304 bytes. When the dump is executed - * by the Port command an extra word will be appended to the dump area. - * The extra word is a copy of the Dump status word (containing the - * C, B, OK bits). [I find 0xa006, with a0 for C+OK and 6 for dump] - */ -struct i596_dump { - u16 dump[153]; /* (304 = 130h) + 2 bytes */ -}; - -struct i596_private { /* aligned to a 16-byte boundary */ - struct i596_scp scp; /* 0 - needs 16-byte alignment */ - struct i596_iscp iscp; /* 12 */ - struct i596_scb scb; /* 20 */ - u32 dummy; /* 60 */ - struct i596_dump dump; /* 64 - needs 16-byte alignment */ - - struct i596_cmd set_add; - char eth_addr[8]; /* directly follows set_add */ - - struct i596_cmd set_conf; - char i596_config[16]; /* directly follows set_conf */ - - struct i596_cmd tdr; - unsigned long tdr_stat; /* directly follows tdr */ - - int last_restart; - struct i596_rbd *rbd_list; - struct i596_rbd *rbd_tail; - struct i596_rfd *rx_tail; - struct i596_cmd *cmd_tail; - struct i596_cmd *cmd_head; - int cmd_backlog; - unsigned long last_cmd; - spinlock_t cmd_lock; -}; - -static char init_setup[14] = { - 0x8E, /* length 14 bytes, prefetch on */ - 0xC8, /* default: fifo to 8, monitor off */ - 0x40, /* default: don't save bad frames (apricot.c had 0x80) */ - 0x2E, /* (default is 0x26) - No source address insertion, 8 byte preamble */ - 0x00, /* default priority and backoff */ - 0x60, /* default interframe spacing */ - 0x00, /* default slot time LSB */ - 0xf2, /* default slot time and nr of retries */ - 0x00, /* default various bits - (0: promiscuous mode, 1: broadcast disable, - 2: encoding mode, 3: transmit on no CRS, - 4: no CRC insertion, 5: CRC type, - 6: bit stuffing, 7: padding) */ - 0x00, /* default carrier sense and collision detect */ - 0x40, /* default minimum frame length */ - 0xff, /* (default is 0xff, and that is what apricot.c has; - elp486.c has 0xfb: Enable crc append in memory.) */ - 0x00, /* default: not full duplex */ - 0x7f /* (default is 0x3f) multi IA */ -}; - -static int i596_open(struct net_device *dev); -static netdev_tx_t i596_start_xmit(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t i596_interrupt(int irq, void *dev_id); -static int i596_close(struct net_device *dev); -static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd); -static void print_eth(char *); -static void set_multicast_list(struct net_device *dev); -static void i596_tx_timeout(struct net_device *dev); - -static int -i596_timeout(struct net_device *dev, char *msg, int ct) { - struct i596_private *lp; - int boguscnt = ct; - - lp = netdev_priv(dev); - while (lp->scb.command) { - if (--boguscnt == 0) { - printk("%s: %s timed out - stat %4.4x, cmd %4.4x\n", - dev->name, msg, - lp->scb.status, lp->scb.command); - return 1; - } - udelay(5); - barrier(); - } - return 0; -} - -static inline int -init_rx_bufs(struct net_device *dev, int num) { - struct i596_private *lp; - struct i596_rfd *rfd; - int i; - // struct i596_rbd *rbd; - - lp = netdev_priv(dev); - lp->scb.pa_rfd = I596_NULL; - - for (i = 0; i < num; i++) { - rfd = kmalloc(sizeof(struct i596_rfd), GFP_KERNEL); - if (rfd == NULL) - break; - - rfd->stat = 0; - rfd->pa_rbd = I596_NULL; - rfd->count = 0; - rfd->size = 1532; - if (i == 0) { - rfd->cmd = CMD_EOL; - lp->rx_tail = rfd; - } else { - rfd->cmd = 0; - } - rfd->pa_next = lp->scb.pa_rfd; - lp->scb.pa_rfd = va_to_pa(rfd); - lp->rx_tail->pa_next = lp->scb.pa_rfd; - } - -#if 0 - for (i = 0; i<RX_RBD_SIZE; i++) { - rbd = kmalloc(sizeof(struct i596_rbd), GFP_KERNEL); - if (rbd) { - rbd->pad = 0; - rbd->count = 0; - rbd->skb = dev_alloc_skb(RX_SKBSIZE); - if (!rbd->skb) { - printk("dev_alloc_skb failed"); - } - rbd->next = rfd->rbd; - if (i) { - rfd->rbd->prev = rbd; - rbd->size = RX_SKBSIZE; - } else { - rbd->size = (RX_SKBSIZE | RBD_EL); - lp->rbd_tail = rbd; - } - - rfd->rbd = rbd; - } - } - lp->rbd_tail->next = rfd->rbd; -#endif - return i; -} - -static inline void -remove_rx_bufs(struct net_device *dev) { - struct i596_private *lp; - struct i596_rfd *rfd; - - lp = netdev_priv(dev); - lp->rx_tail->pa_next = I596_NULL; - - do { - rfd = pa_to_va(lp->scb.pa_rfd); - lp->scb.pa_rfd = rfd->pa_next; - kfree(rfd); - } while (rfd != lp->rx_tail); - - lp->rx_tail = NULL; - -#if 0 - for (lp->rbd_list) { - } -#endif -} - -#define PORT_RESET 0x00 /* reset 82596 */ -#define PORT_SELFTEST 0x01 /* selftest */ -#define PORT_ALTSCP 0x02 /* alternate SCB address */ -#define PORT_DUMP 0x03 /* dump */ - -#define IOADDR 0xcb0 /* real constant */ -#define IRQ 10 /* default IRQ - can be changed by ECU */ - -/* The 82596 requires two 16-bit write cycles for a port command */ -static inline void -PORT(phys_addr a, unsigned int cmd) { - if (a & 0xf) - printk("lp486e.c: PORT: address not aligned\n"); - outw(((a & 0xffff) | cmd), IOADDR); - outw(((a>>16) & 0xffff), IOADDR+2); -} - -static inline void -CA(void) { - outb(0, IOADDR+4); - udelay(8); -} - -static inline void -CLEAR_INT(void) { - outb(0, IOADDR+8); -} - -#if 0 -/* selftest or dump */ -static void -i596_port_do(struct net_device *dev, int portcmd, char *cmdname) { - struct i596_private *lp = netdev_priv(dev); - u16 *outp; - int i, m; - - memset((void *)&(lp->dump), 0, sizeof(struct i596_dump)); - outp = &(lp->dump.dump[0]); - - PORT(va_to_pa(outp), portcmd); - mdelay(30); /* random, unmotivated */ - - printk("lp486e i82596 %s result:\n", cmdname); - for (m = ARRAY_SIZE(lp->dump.dump); m && lp->dump.dump[m-1] == 0; m--) - ; - for (i = 0; i < m; i++) { - printk(" %04x", lp->dump.dump[i]); - if (i%8 == 7) - printk("\n"); - } - printk("\n"); -} -#endif - -static int -i596_scp_setup(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - int boguscnt; - - /* Setup SCP, ISCP, SCB */ - /* - * sysbus bits: - * only a single byte is significant - here 0x44 - * 0x80: big endian mode (details depend on stepping) - * 0x40: 1 - * 0x20: interrupt pin is active low - * 0x10: lock function disabled - * 0x08: external triggering of bus throttle timers - * 0x06: 00: 82586 compat mode, 01: segmented mode, 10: linear mode - * 0x01: unused - */ - lp->scp.sysbus = 0x00440000; /* linear mode */ - lp->scp.pad = 0; /* must be zero */ - lp->scp.pa_iscp = va_to_pa(&(lp->iscp)); - - /* - * The CPU sets the ISCP to 1 before it gives the first CA() - */ - lp->iscp.busy = 0x0001; - lp->iscp.pa_scb = va_to_pa(&(lp->scb)); - - lp->scb.command = 0; - lp->scb.status = 0; - lp->scb.pa_cmd = I596_NULL; - /* lp->scb.pa_rfd has been initialised already */ - - lp->last_cmd = jiffies; - lp->cmd_backlog = 0; - lp->cmd_head = NULL; - - /* - * Reset the 82596. - * We need to wait 10 systemclock cycles, and - * 5 serial clock cycles. - */ - PORT(0, PORT_RESET); /* address part ignored */ - udelay(100); - - /* - * Before the CA signal is asserted, the default SCP address - * (0x00fffff4) can be changed to a 16-byte aligned value - */ - PORT(va_to_pa(&lp->scp), PORT_ALTSCP); /* change the scp address */ - - /* - * The initialization procedure begins when a - * Channel Attention signal is asserted after a reset. - */ - - CA(); - - /* - * The ISCP busy is cleared by the 82596 after the SCB address is read. - */ - boguscnt = 100; - while (lp->iscp.busy) { - if (--boguscnt == 0) { - /* No i82596 present? */ - printk("%s: i82596 initialization timed out\n", - dev->name); - return 1; - } - udelay(5); - barrier(); - } - /* I find here boguscnt==100, so no delay was required. */ - - return 0; -} - -static int -init_i596(struct net_device *dev) { - struct i596_private *lp; - - if (i596_scp_setup(dev)) - return 1; - - lp = netdev_priv(dev); - lp->scb.command = 0; - - memcpy ((void *)lp->i596_config, init_setup, 14); - lp->set_conf.command = CmdConfigure; - i596_add_cmd(dev, (void *)&lp->set_conf); - - memcpy ((void *)lp->eth_addr, dev->dev_addr, 6); - lp->set_add.command = CmdIASetup; - i596_add_cmd(dev, &lp->set_add); - - lp->tdr.command = CmdTDR; - i596_add_cmd(dev, &lp->tdr); - - if (lp->scb.command && i596_timeout(dev, "i82596 init", 200)) - return 1; - - lp->scb.command = RX_START; - CA(); - - barrier(); - - if (lp->scb.command && i596_timeout(dev, "Receive Unit start", 100)) - return 1; - - return 0; -} - -/* Receive a single frame */ -static inline int -i596_rx_one(struct net_device *dev, struct i596_private *lp, - struct i596_rfd *rfd, int *frames) { - - if (rfd->stat & RFD_STAT_OK) { - /* a good frame */ - int pkt_len = (rfd->count & 0x3fff); - struct sk_buff *skb = netdev_alloc_skb(dev, pkt_len); - - (*frames)++; - - if (rfd->cmd & CMD_EOL) - printk("Received on EOL\n"); - - if (skb == NULL) { - printk ("%s: i596_rx Memory squeeze, " - "dropping packet.\n", dev->name); - dev->stats.rx_dropped++; - return 1; - } - - memcpy(skb_put(skb,pkt_len), rfd->data, pkt_len); - - skb->protocol = eth_type_trans(skb,dev); - netif_rx(skb); - dev->stats.rx_packets++; - } else { -#if 0 - printk("Frame reception error status %04x\n", - rfd->stat); -#endif - dev->stats.rx_errors++; - if (rfd->stat & RFD_COLLISION) - dev->stats.collisions++; - if (rfd->stat & RFD_SHORT_FRAME_ERR) - dev->stats.rx_length_errors++; - if (rfd->stat & RFD_DMA_ERR) - dev->stats.rx_over_errors++; - if (rfd->stat & RFD_NOBUFS_ERR) - dev->stats.rx_fifo_errors++; - if (rfd->stat & RFD_ALIGN_ERR) - dev->stats.rx_frame_errors++; - if (rfd->stat & RFD_CRC_ERR) - dev->stats.rx_crc_errors++; - if (rfd->stat & RFD_LENGTH_ERR) - dev->stats.rx_length_errors++; - } - rfd->stat = rfd->count = 0; - return 0; -} - -static int -i596_rx(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - struct i596_rfd *rfd; - int frames = 0; - - while (1) { - rfd = pa_to_va(lp->scb.pa_rfd); - if (!rfd) { - printk(KERN_ERR "i596_rx: NULL rfd?\n"); - return 0; - } -#if 1 - if (rfd->stat && !(rfd->stat & (RFD_STAT_C | RFD_STAT_B))) - printk("SF:%p-%04x\n", rfd, rfd->stat); -#endif - if (!(rfd->stat & RFD_STAT_C)) - break; /* next one not ready */ - if (i596_rx_one(dev, lp, rfd, &frames)) - break; /* out of memory */ - rfd->cmd = CMD_EOL; - lp->rx_tail->cmd = 0; - lp->rx_tail = rfd; - lp->scb.pa_rfd = rfd->pa_next; - barrier(); - } - - return frames; -} - -static void -i596_cleanup_cmd(struct net_device *dev) { - struct i596_private *lp; - struct i596_cmd *cmd; - - lp = netdev_priv(dev); - while (lp->cmd_head) { - cmd = lp->cmd_head; - - lp->cmd_head = pa_to_va(lp->cmd_head->pa_next); - lp->cmd_backlog--; - - switch ((cmd->command) & 0x7) { - case CmdTx: { - struct tx_cmd *tx_cmd = (struct tx_cmd *) cmd; - struct i596_tbd * tx_cmd_tbd; - tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd); - - dev_kfree_skb_any(tx_cmd_tbd->skb); - - dev->stats.tx_errors++; - dev->stats.tx_aborted_errors++; - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)tx_cmd); - netif_wake_queue(dev); - break; - } - case CmdMulticastList: { - // unsigned short count = *((unsigned short *) (ptr + 1)); - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)cmd); - break; - } - default: { - cmd->pa_next = I596_NULL; - break; - } - } - barrier(); - } - - if (lp->scb.command && i596_timeout(dev, "i596_cleanup_cmd", 100)) - ; - - lp->scb.pa_cmd = va_to_pa(lp->cmd_head); -} - -static void i596_reset(struct net_device *dev, struct i596_private *lp, int ioaddr) { - - if (lp->scb.command && i596_timeout(dev, "i596_reset", 100)) - ; - - netif_stop_queue(dev); - - lp->scb.command = CUC_ABORT | RX_ABORT; - CA(); - barrier(); - - /* wait for shutdown */ - if (lp->scb.command && i596_timeout(dev, "i596_reset(2)", 400)) - ; - - i596_cleanup_cmd(dev); - i596_rx(dev); - - netif_start_queue(dev); - /*dev_kfree_skb(skb, FREE_WRITE);*/ - init_i596(dev); -} - -static void i596_add_cmd(struct net_device *dev, struct i596_cmd *cmd) { - struct i596_private *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - unsigned long flags; - - cmd->status = 0; - cmd->command |= (CMD_EOL | CMD_INTR); - cmd->pa_next = I596_NULL; - - spin_lock_irqsave(&lp->cmd_lock, flags); - - if (lp->cmd_head) { - lp->cmd_tail->pa_next = va_to_pa(cmd); - } else { - lp->cmd_head = cmd; - if (lp->scb.command && i596_timeout(dev, "i596_add_cmd", 100)) - ; - lp->scb.pa_cmd = va_to_pa(cmd); - lp->scb.command = CUC_START; - CA(); - } - lp->cmd_tail = cmd; - lp->cmd_backlog++; - - lp->cmd_head = pa_to_va(lp->scb.pa_cmd); - spin_unlock_irqrestore(&lp->cmd_lock, flags); - - if (lp->cmd_backlog > 16) { - int tickssofar = jiffies - lp->last_cmd; - if (tickssofar < HZ/4) - return; - - printk(KERN_WARNING "%s: command unit timed out, status resetting.\n", dev->name); - i596_reset(dev, lp, ioaddr); - } -} - -static int i596_open(struct net_device *dev) -{ - int i; - - i = request_irq(dev->irq, i596_interrupt, IRQF_SHARED, dev->name, dev); - if (i) { - printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq); - return i; - } - - if ((i = init_rx_bufs(dev, RX_RING_SIZE)) < RX_RING_SIZE) - printk(KERN_ERR "%s: only able to allocate %d receive buffers\n", dev->name, i); - - if (i < 4) { - free_irq(dev->irq, dev); - return -EAGAIN; - } - netif_start_queue(dev); - init_i596(dev); - return 0; /* Always succeed */ -} - -static netdev_tx_t i596_start_xmit (struct sk_buff *skb, struct net_device *dev) { - struct tx_cmd *tx_cmd; - short length; - - length = skb->len; - - if (length < ETH_ZLEN) { - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - length = ETH_ZLEN; - } - - tx_cmd = kmalloc((sizeof (struct tx_cmd) + sizeof (struct i596_tbd)), GFP_ATOMIC); - if (tx_cmd == NULL) { - printk(KERN_WARNING "%s: i596_xmit Memory squeeze, dropping packet.\n", dev->name); - dev->stats.tx_dropped++; - dev_kfree_skb (skb); - } else { - struct i596_tbd *tx_cmd_tbd; - tx_cmd_tbd = (struct i596_tbd *) (tx_cmd + 1); - tx_cmd->pa_tbd = va_to_pa (tx_cmd_tbd); - tx_cmd_tbd->pa_next = I596_NULL; - - tx_cmd->cmd.command = (CMD_FLEX | CmdTx); - - tx_cmd->pad = 0; - tx_cmd->size = 0; - tx_cmd_tbd->pad = 0; - tx_cmd_tbd->size = (EOF | length); - - tx_cmd_tbd->pa_data = va_to_pa (skb->data); - tx_cmd_tbd->skb = skb; - - if (i596_debug & LOG_SRCDST) - print_eth (skb->data); - - i596_add_cmd (dev, (struct i596_cmd *) tx_cmd); - - dev->stats.tx_packets++; - } - - return NETDEV_TX_OK; -} - -static void -i596_tx_timeout (struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - int ioaddr = dev->base_addr; - - /* Transmitter timeout, serious problems. */ - printk(KERN_WARNING "%s: transmit timed out, status resetting.\n", dev->name); - dev->stats.tx_errors++; - - /* Try to restart the adaptor */ - if (lp->last_restart == dev->stats.tx_packets) { - printk ("Resetting board.\n"); - - /* Shutdown and restart */ - i596_reset (dev, lp, ioaddr); - } else { - /* Issue a channel attention signal */ - printk ("Kicking board.\n"); - lp->scb.command = (CUC_START | RX_START); - CA(); - lp->last_restart = dev->stats.tx_packets; - } - netif_wake_queue(dev); -} - -static void print_eth(char *add) -{ - int i; - - printk ("Dest "); - for (i = 0; i < 6; i++) - printk(" %2.2X", (unsigned char) add[i]); - printk ("\n"); - - printk ("Source"); - for (i = 0; i < 6; i++) - printk(" %2.2X", (unsigned char) add[i+6]); - printk ("\n"); - - printk ("type %2.2X%2.2X\n", - (unsigned char) add[12], (unsigned char) add[13]); -} - -static const struct net_device_ops i596_netdev_ops = { - .ndo_open = i596_open, - .ndo_stop = i596_close, - .ndo_start_xmit = i596_start_xmit, - .ndo_set_rx_mode = set_multicast_list, - .ndo_tx_timeout = i596_tx_timeout, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int __init lp486e_probe(struct net_device *dev) { - struct i596_private *lp; - unsigned char eth_addr[6] = { 0, 0xaa, 0, 0, 0, 0 }; - unsigned char *bios; - int i, j; - int ret = -ENOMEM; - static int probed; - - if (probed) - return -ENODEV; - probed++; - - if (!request_region(IOADDR, LP486E_TOTAL_SIZE, DRV_NAME)) { - printk(KERN_ERR "lp486e: IO address 0x%x in use\n", IOADDR); - return -EBUSY; - } - - lp = netdev_priv(dev); - spin_lock_init(&lp->cmd_lock); - - /* - * Do we really have this thing? - */ - if (i596_scp_setup(dev)) { - ret = -ENODEV; - goto err_out_kfree; - } - - dev->base_addr = IOADDR; - dev->irq = IRQ; - - - /* - * How do we find the ethernet address? I don't know. - * One possibility is to look at the EISA configuration area - * [0xe8000-0xe9fff]. This contains the ethernet address - * but not at a fixed address - things depend on setup options. - * - * If we find no address, or the wrong address, use - * ifconfig eth0 hw ether a1:a2:a3:a4:a5:a6 - * with the value found in the BIOS setup. - */ - bios = bus_to_virt(0xe8000); - for (j = 0; j < 0x2000; j++) { - if (bios[j] == 0 && bios[j+1] == 0xaa && bios[j+2] == 0) { - printk("%s: maybe address at BIOS 0x%x:", - dev->name, 0xe8000+j); - for (i = 0; i < 6; i++) { - eth_addr[i] = bios[i+j]; - printk(" %2.2X", eth_addr[i]); - } - printk("\n"); - } - } - - printk("%s: lp486e 82596 at %#3lx, IRQ %d,", - dev->name, dev->base_addr, dev->irq); - for (i = 0; i < 6; i++) - printk(" %2.2X", dev->dev_addr[i] = eth_addr[i]); - printk("\n"); - - /* The LP486E-specific entries in the device structure. */ - dev->netdev_ops = &i596_netdev_ops; - dev->watchdog_timeo = 5*HZ; - -#if 0 - /* selftest reports 0x320925ae - don't know what that means */ - i596_port_do(dev, PORT_SELFTEST, "selftest"); - i596_port_do(dev, PORT_DUMP, "dump"); -#endif - return 0; - -err_out_kfree: - release_region(IOADDR, LP486E_TOTAL_SIZE); - return ret; -} - -static inline void -i596_handle_CU_completion(struct net_device *dev, - struct i596_private *lp, - unsigned short status, - unsigned short *ack_cmdp) { - struct i596_cmd *cmd; - int frames_out = 0; - int commands_done = 0; - int cmd_val; - unsigned long flags; - - spin_lock_irqsave(&lp->cmd_lock, flags); - cmd = lp->cmd_head; - - while (lp->cmd_head && (lp->cmd_head->status & CMD_STAT_C)) { - cmd = lp->cmd_head; - - lp->cmd_head = pa_to_va(lp->cmd_head->pa_next); - lp->cmd_backlog--; - - commands_done++; - cmd_val = cmd->command & 0x7; -#if 0 - printk("finished CU %s command (%d)\n", - CUcmdnames[cmd_val], cmd_val); -#endif - switch (cmd_val) { - case CmdTx: - { - struct tx_cmd *tx_cmd; - struct i596_tbd *tx_cmd_tbd; - - tx_cmd = (struct tx_cmd *) cmd; - tx_cmd_tbd = pa_to_va(tx_cmd->pa_tbd); - - frames_out++; - if (cmd->status & CMD_STAT_OK) { - if (i596_debug) - print_eth(pa_to_va(tx_cmd_tbd->pa_data)); - } else { - dev->stats.tx_errors++; - if (i596_debug) - printk("transmission failure:%04x\n", - cmd->status); - if (cmd->status & 0x0020) - dev->stats.collisions++; - if (!(cmd->status & 0x0040)) - dev->stats.tx_heartbeat_errors++; - if (cmd->status & 0x0400) - dev->stats.tx_carrier_errors++; - if (cmd->status & 0x0800) - dev->stats.collisions++; - if (cmd->status & 0x1000) - dev->stats.tx_aborted_errors++; - } - dev_kfree_skb_irq(tx_cmd_tbd->skb); - - cmd->pa_next = I596_NULL; - kfree((unsigned char *)tx_cmd); - netif_wake_queue(dev); - break; - } - - case CmdMulticastList: - cmd->pa_next = I596_NULL; - kfree((unsigned char *)cmd); - break; - - case CmdTDR: - { - unsigned long status = *((unsigned long *) (cmd + 1)); - if (status & 0x8000) { - if (i596_debug) - printk("%s: link ok.\n", dev->name); - } else { - if (status & 0x4000) - printk("%s: Transceiver problem.\n", - dev->name); - if (status & 0x2000) - printk("%s: Termination problem.\n", - dev->name); - if (status & 0x1000) - printk("%s: Short circuit.\n", - dev->name); - printk("%s: Time %ld.\n", - dev->name, status & 0x07ff); - } - } - default: - cmd->pa_next = I596_NULL; - lp->last_cmd = jiffies; - - } - barrier(); - } - - cmd = lp->cmd_head; - while (cmd && (cmd != lp->cmd_tail)) { - cmd->command &= 0x1fff; - cmd = pa_to_va(cmd->pa_next); - barrier(); - } - - if (lp->cmd_head) - *ack_cmdp |= CUC_START; - lp->scb.pa_cmd = va_to_pa(lp->cmd_head); - spin_unlock_irqrestore(&lp->cmd_lock, flags); -} - -static irqreturn_t -i596_interrupt(int irq, void *dev_instance) -{ - struct net_device *dev = dev_instance; - struct i596_private *lp = netdev_priv(dev); - unsigned short status, ack_cmd = 0; - int frames_in = 0; - - /* - * The 82596 examines the command, performs the required action, - * and then clears the SCB command word. - */ - if (lp->scb.command && i596_timeout(dev, "interrupt", 40)) - ; - - /* - * The status word indicates the status of the 82596. - * It is modified only by the 82596. - * - * [So, we must not clear it. I find often status 0xffff, - * which is not one of the values allowed by the docs.] - */ - status = lp->scb.status; -#if 0 - if (i596_debug) { - printk("%s: i596 interrupt, ", dev->name); - i596_out_status(status); - } -#endif - /* Impossible, but it happens - perhaps when we get - a receive interrupt but scb.pa_rfd is I596_NULL. */ - if (status == 0xffff) { - printk("%s: i596_interrupt: got status 0xffff\n", dev->name); - goto out; - } - - ack_cmd = (status & STAT_ACK); - - if (status & (STAT_CX | STAT_CNA)) - i596_handle_CU_completion(dev, lp, status, &ack_cmd); - - if (status & (STAT_FR | STAT_RNR)) { - /* Restart the receive unit when it got inactive somehow */ - if ((status & STAT_RNR) && netif_running(dev)) - ack_cmd |= RX_START; - - if (status & STAT_FR) { - frames_in = i596_rx(dev); - if (!frames_in) - printk("receive frame reported, but no frames\n"); - } - } - - /* acknowledge the interrupt */ - /* - if ((lp->scb.pa_cmd != I596_NULL) && netif_running(dev)) - ack_cmd |= CUC_START; - */ - - if (lp->scb.command && i596_timeout(dev, "i596 interrupt", 100)) - ; - - lp->scb.command = ack_cmd; - - CLEAR_INT(); - CA(); - - out: - return IRQ_HANDLED; -} - -static int i596_close(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - - netif_stop_queue(dev); - - if (i596_debug) - printk("%s: Shutting down ethercard, status was %4.4x.\n", - dev->name, lp->scb.status); - - lp->scb.command = (CUC_ABORT | RX_ABORT); - CA(); - - i596_cleanup_cmd(dev); - - if (lp->scb.command && i596_timeout(dev, "i596_close", 200)) - ; - - free_irq(dev->irq, dev); - remove_rx_bufs(dev); - - return 0; -} - -/* -* Set or clear the multicast filter for this adaptor. -*/ - -static void set_multicast_list(struct net_device *dev) { - struct i596_private *lp = netdev_priv(dev); - struct i596_cmd *cmd; - - if (i596_debug > 1) - printk ("%s: set multicast list %d\n", - dev->name, netdev_mc_count(dev)); - - if (!netdev_mc_empty(dev)) { - struct netdev_hw_addr *ha; - char *cp; - cmd = kmalloc(sizeof(struct i596_cmd) + 2 + - netdev_mc_count(dev) * 6, GFP_ATOMIC); - if (cmd == NULL) { - printk (KERN_ERR "%s: set_multicast Memory squeeze.\n", dev->name); - return; - } - cmd->command = CmdMulticastList; - *((unsigned short *) (cmd + 1)) = netdev_mc_count(dev) * 6; - cp = ((char *)(cmd + 1))+2; - netdev_for_each_mc_addr(ha, dev) { - memcpy(cp, ha->addr, 6); - cp += 6; - } - if (i596_debug & LOG_SRCDST) - print_eth (((char *)(cmd + 1)) + 2); - i596_add_cmd(dev, cmd); - } else { - if (lp->set_conf.pa_next != I596_NULL) { - return; - } - if (netdev_mc_empty(dev) && - !(dev->flags & (IFF_PROMISC | IFF_ALLMULTI))) { - lp->i596_config[8] &= ~0x01; - } else { - lp->i596_config[8] |= 0x01; - } - - i596_add_cmd(dev, &lp->set_conf); - } -} - -MODULE_AUTHOR("Ard van Breemen <ard@cstmel.nl.eu.org>"); -MODULE_DESCRIPTION("Intel Panther onboard i82596 driver"); -MODULE_LICENSE("GPL"); - -static struct net_device *dev_lp486e; -static int full_duplex; -static int options; -static int io = IOADDR; -static int irq = IRQ; - -module_param(debug, int, 0); -//module_param(max_interrupt_work, int, 0); -//module_param(reverse_probe, int, 0); -//module_param(rx_copybreak, int, 0); -module_param(options, int, 0); -module_param(full_duplex, int, 0); - -static int __init lp486e_init_module(void) { - int err; - struct net_device *dev = alloc_etherdev(sizeof(struct i596_private)); - if (!dev) - return -ENOMEM; - - dev->irq = irq; - dev->base_addr = io; - err = lp486e_probe(dev); - if (err) { - free_netdev(dev); - return err; - } - err = register_netdev(dev); - if (err) { - release_region(dev->base_addr, LP486E_TOTAL_SIZE); - free_netdev(dev); - return err; - } - dev_lp486e = dev; - full_duplex = 0; - options = 0; - return 0; -} - -static void __exit lp486e_cleanup_module(void) { - unregister_netdev(dev_lp486e); - release_region(dev_lp486e->base_addr, LP486E_TOTAL_SIZE); - free_netdev(dev_lp486e); -} - -module_init(lp486e_init_module); -module_exit(lp486e_cleanup_module); |