diff options
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ethtool.c | 13 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.c | 71 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.h | 2 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 89 | ||||
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/regs.h | 1 |
5 files changed, 113 insertions, 63 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 2c1813737f6..f91a8f3f9d4 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -36,6 +36,7 @@ #include <linux/delay.h> #include <linux/vmalloc.h> #include <linux/mdio.h> +#include <linux/pm_runtime.h> #include "e1000.h" @@ -2229,7 +2230,19 @@ static int e1000e_get_ts_info(struct net_device *netdev, return 0; } +static int e1000e_ethtool_begin(struct net_device *netdev) +{ + return pm_runtime_get_sync(netdev->dev.parent); +} + +static void e1000e_ethtool_complete(struct net_device *netdev) +{ + pm_runtime_put_sync(netdev->dev.parent); +} + static const struct ethtool_ops e1000_ethtool_ops = { + .begin = e1000e_ethtool_begin, + .complete = e1000e_ethtool_complete, .get_settings = e1000_get_settings, .set_settings = e1000_set_settings, .get_drvinfo = e1000_get_drvinfo, diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index dff7bff8b8e..121a865c7fb 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -782,6 +782,59 @@ release: } /** + * e1000_k1_workaround_lpt_lp - K1 workaround on Lynxpoint-LP + * @hw: pointer to the HW structure + * @link: link up bool flag + * + * When K1 is enabled for 1Gbps, the MAC can miss 2 DMA completion indications + * preventing further DMA write requests. Workaround the issue by disabling + * the de-assertion of the clock request when in 1Gpbs mode. + **/ +static s32 e1000_k1_workaround_lpt_lp(struct e1000_hw *hw, bool link) +{ + u32 fextnvm6 = er32(FEXTNVM6); + s32 ret_val = 0; + + if (link && (er32(STATUS) & E1000_STATUS_SPEED_1000)) { + u16 kmrn_reg; + + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return ret_val; + + ret_val = + e1000e_read_kmrn_reg_locked(hw, E1000_KMRNCTRLSTA_K1_CONFIG, + &kmrn_reg); + if (ret_val) + goto release; + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg & + ~E1000_KMRNCTRLSTA_K1_ENABLE); + if (ret_val) + goto release; + + usleep_range(10, 20); + + ew32(FEXTNVM6, fextnvm6 | E1000_FEXTNVM6_REQ_PLL_CLK); + + ret_val = + e1000e_write_kmrn_reg_locked(hw, + E1000_KMRNCTRLSTA_K1_CONFIG, + kmrn_reg); +release: + hw->phy.ops.release(hw); + } else { + /* clear FEXTNVM6 bit 8 on link down or 10/100 */ + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } + + return ret_val; +} + +/** * e1000_check_for_copper_link_ich8lan - Check for link (Copper) * @hw: pointer to the HW structure * @@ -818,6 +871,14 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) return ret_val; } + /* Work-around I218 hang issue */ + if ((hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (hw->adapter->pdev->device == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + ret_val = e1000_k1_workaround_lpt_lp(hw, link); + if (ret_val) + return ret_val; + } + /* Clear link partner's EEE ability */ hw->dev_spec.ich8lan.eee_lp_ability = 0; @@ -3954,8 +4015,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw) phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_GBE_DISABLE; + if (hw->phy.type == e1000_phy_i217) { - u16 phy_reg; + u16 phy_reg, device_id = hw->adapter->pdev->device; + + if ((device_id == E1000_DEV_ID_PCH_LPTLP_I218_LM) || + (device_id == E1000_DEV_ID_PCH_LPTLP_I218_V)) { + u32 fextnvm6 = er32(FEXTNVM6); + + ew32(FEXTNVM6, fextnvm6 & ~E1000_FEXTNVM6_REQ_PLL_CLK); + } ret_val = hw->phy.ops.acquire(hw); if (ret_val) diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index b6d3174d7d2..8bf4655c2e1 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -92,6 +92,8 @@ #define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 +#define E1000_FEXTNVM6_REQ_PLL_CLK 0x00000100 + #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index a177b8b65c4..7e615e2bf7e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -848,11 +848,16 @@ check_page: } } - if (!buffer_info->dma) + if (!buffer_info->dma) { buffer_info->dma = dma_map_page(&pdev->dev, buffer_info->page, 0, PAGE_SIZE, DMA_FROM_DEVICE); + if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { + adapter->alloc_rx_buff_failed++; + break; + } + } rx_desc = E1000_RX_DESC_EXT(*rx_ring, i); rx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma); @@ -4303,6 +4308,7 @@ static int e1000_open(struct net_device *netdev) netif_start_queue(netdev); adapter->idle_check = true; + hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); /* fire a link status change interrupt to start the watchdog */ @@ -4662,6 +4668,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) (adapter->hw.phy.media_type == e1000_media_type_copper)) { int ret_val; + pm_runtime_get_sync(&adapter->pdev->dev); ret_val = e1e_rphy(hw, MII_BMCR, &phy->bmcr); ret_val |= e1e_rphy(hw, MII_BMSR, &phy->bmsr); ret_val |= e1e_rphy(hw, MII_ADVERTISE, &phy->advertise); @@ -4672,6 +4679,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, MII_ESTATUS, &phy->estatus); if (ret_val) e_warn("Error reading PHY register\n"); + pm_runtime_put_sync(&adapter->pdev->dev); } else { /* Do not read PHY registers if link is not up * Set values to typical power-on defaults @@ -5887,8 +5895,7 @@ release: return retval; } -static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, - bool runtime) +static int __e1000_shutdown(struct pci_dev *pdev, bool runtime) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); @@ -5912,10 +5919,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, } e1000e_reset_interrupt_capability(adapter); - retval = pci_save_state(pdev); - if (retval) - return retval; - status = er32(STATUS); if (status & E1000_STATUS_LU) wufc &= ~E1000_WUFC_LNKC; @@ -5971,13 +5974,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, ew32(WUFC, 0); } - *enable_wake = !!wufc; - - /* make sure adapter isn't asleep if manageability is enabled */ - if ((adapter->flags & FLAG_MNG_PT_ENABLED) || - (hw->mac.ops.check_mng_mode(hw))) - *enable_wake = true; - if (adapter->hw.phy.type == e1000_phy_igp_3) e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw); @@ -5986,27 +5982,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, */ e1000e_release_hw_control(adapter); - pci_disable_device(pdev); - - return 0; -} - -static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake) -{ - if (sleep && wake) { - pci_prepare_to_sleep(pdev); - return; - } - - pci_wake_from_d3(pdev, wake); - pci_set_power_state(pdev, PCI_D3hot); -} - -static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, - bool wake) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct e1000_adapter *adapter = netdev_priv(netdev); + pci_clear_master(pdev); /* The pci-e switch on some quad port adapters will report a * correctable error when the MAC transitions from D0 to D3. To @@ -6021,12 +5997,13 @@ static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep, pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, (devctl & ~PCI_EXP_DEVCTL_CERE)); - e1000_power_off(pdev, sleep, wake); + pci_save_state(pdev); + pci_prepare_to_sleep(pdev); pcie_capability_write_word(us_dev, PCI_EXP_DEVCTL, devctl); - } else { - e1000_power_off(pdev, sleep, wake); } + + return 0; } #ifdef CONFIG_PCIEASPM @@ -6084,9 +6061,7 @@ static int __e1000_resume(struct pci_dev *pdev) if (aspm_disable_flag) e1000e_disable_aspm(pdev, aspm_disable_flag); - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - pci_save_state(pdev); + pci_set_master(pdev); e1000e_set_interrupt_capability(adapter); if (netif_running(netdev)) { @@ -6152,14 +6127,8 @@ static int __e1000_resume(struct pci_dev *pdev) static int e1000_suspend(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); - int retval; - bool wake; - retval = __e1000_shutdown(pdev, &wake, false); - if (!retval) - e1000_complete_shutdown(pdev, true, wake); - - return retval; + return __e1000_shutdown(pdev, false); } static int e1000_resume(struct device *dev) @@ -6182,13 +6151,10 @@ static int e1000_runtime_suspend(struct device *dev) struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev_priv(netdev); - if (e1000e_pm_ready(adapter)) { - bool wake; - - __e1000_shutdown(pdev, &wake, true); - } + if (!e1000e_pm_ready(adapter)) + return 0; - return 0; + return __e1000_shutdown(pdev, true); } static int e1000_idle(struct device *dev) @@ -6226,12 +6192,7 @@ static int e1000_runtime_resume(struct device *dev) static void e1000_shutdown(struct pci_dev *pdev) { - bool wake = false; - - __e1000_shutdown(pdev, &wake, false); - - if (system_state == SYSTEM_POWER_OFF) - e1000_complete_shutdown(pdev, false, wake); + __e1000_shutdown(pdev, false); } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -6352,9 +6313,9 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev) "Cannot re-enable PCI device after reset.\n"); result = PCI_ERS_RESULT_DISCONNECT; } else { - pci_set_master(pdev); pdev->state_saved = true; pci_restore_state(pdev); + pci_set_master(pdev); pci_enable_wake(pdev, PCI_D3hot, 0); pci_enable_wake(pdev, PCI_D3cold, 0); @@ -6783,7 +6744,11 @@ static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; - device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + /* make sure adapter isn't asleep if manageability is enabled */ + if (adapter->wol || (adapter->flags & FLAG_MNG_PT_ENABLED) || + (hw->mac.ops.check_mng_mode(hw))) + device_wakeup_enable(&pdev->dev); /* save off EEPROM version number */ e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers); diff --git a/drivers/net/ethernet/intel/e1000e/regs.h b/drivers/net/ethernet/intel/e1000e/regs.h index 794fe149766..a7e6a3e3725 100644 --- a/drivers/net/ethernet/intel/e1000e/regs.h +++ b/drivers/net/ethernet/intel/e1000e/regs.h @@ -42,6 +42,7 @@ #define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ #define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ +#define E1000_FEXTNVM6 0x00010 /* Future Extended NVM 6 - RW */ #define E1000_FEXTNVM7 0x000E4 /* Future Extended NVM 7 - RW */ #define E1000_FCT 0x00030 /* Flow Control Type - RW */ #define E1000_VET 0x00038 /* VLAN Ether Type - RW */ |