diff options
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k')
21 files changed, 16166 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/Makefile b/drivers/net/ethernet/intel/fm10k/Makefile new file mode 100644 index 00000000000..08859dd220a --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/Makefile @@ -0,0 +1,33 @@ +################################################################################ +# +# Intel Ethernet Switch Host Interface Driver +# Copyright(c) 2013 - 2014 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# +# Contact Information: +# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> +# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 +# +################################################################################ + +# +# Makefile for the Intel(R) FM10000 Ethernet Switch Host Interface driver +# + +obj-$(CONFIG_FM10K) += fm10k.o + +fm10k-objs := fm10k_main.o fm10k_common.o fm10k_pci.o \ + fm10k_netdev.o fm10k_ethtool.o fm10k_pf.o fm10k_vf.o \ + fm10k_mbx.o fm10k_iov.o fm10k_tlv.o \ + fm10k_debugfs.o fm10k_ptp.o fm10k_dcbnl.o diff --git a/drivers/net/ethernet/intel/fm10k/fm10k.h b/drivers/net/ethernet/intel/fm10k/fm10k.h new file mode 100644 index 00000000000..42eb4344a9d --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k.h @@ -0,0 +1,530 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#ifndef _FM10K_H_ +#define _FM10K_H_ + +#include <linux/types.h> +#include <linux/etherdevice.h> +#include <linux/rtnetlink.h> +#include <linux/if_vlan.h> +#include <linux/pci.h> +#include <linux/net_tstamp.h> +#include <linux/clocksource.h> +#include <linux/ptp_clock_kernel.h> + +#include "fm10k_pf.h" +#include "fm10k_vf.h" + +#define FM10K_MAX_JUMBO_FRAME_SIZE 15358 /* Maximum supported size 15K */ + +#define MAX_QUEUES FM10K_MAX_QUEUES_PF + +#define FM10K_MIN_RXD 128 +#define FM10K_MAX_RXD 4096 +#define FM10K_DEFAULT_RXD 256 + +#define FM10K_MIN_TXD 128 +#define FM10K_MAX_TXD 4096 +#define FM10K_DEFAULT_TXD 256 +#define FM10K_DEFAULT_TX_WORK 256 + +#define FM10K_RXBUFFER_256 256 +#define FM10K_RX_HDR_LEN FM10K_RXBUFFER_256 +#define FM10K_RXBUFFER_2048 2048 +#define FM10K_RX_BUFSZ FM10K_RXBUFFER_2048 + +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define FM10K_RX_BUFFER_WRITE 16 /* Must be power of 2 */ + +#define FM10K_MAX_STATIONS 63 +struct fm10k_l2_accel { + int size; + u16 count; + u16 dglort; + struct rcu_head rcu; + struct net_device *macvlan[0]; +}; + +enum fm10k_ring_state_t { + __FM10K_TX_DETECT_HANG, + __FM10K_HANG_CHECK_ARMED, +}; + +#define check_for_tx_hang(ring) \ + test_bit(__FM10K_TX_DETECT_HANG, &(ring)->state) +#define set_check_for_tx_hang(ring) \ + set_bit(__FM10K_TX_DETECT_HANG, &(ring)->state) +#define clear_check_for_tx_hang(ring) \ + clear_bit(__FM10K_TX_DETECT_HANG, &(ring)->state) + +struct fm10k_tx_buffer { + struct fm10k_tx_desc *next_to_watch; + struct sk_buff *skb; + unsigned int bytecount; + u16 gso_segs; + u16 tx_flags; + DEFINE_DMA_UNMAP_ADDR(dma); + DEFINE_DMA_UNMAP_LEN(len); +}; + +struct fm10k_rx_buffer { + dma_addr_t dma; + struct page *page; + u32 page_offset; +}; + +struct fm10k_queue_stats { + u64 packets; + u64 bytes; +}; + +struct fm10k_tx_queue_stats { + u64 restart_queue; + u64 csum_err; + u64 tx_busy; + u64 tx_done_old; +}; + +struct fm10k_rx_queue_stats { + u64 alloc_failed; + u64 csum_err; + u64 errors; +}; + +struct fm10k_ring { + struct fm10k_q_vector *q_vector;/* backpointer to host q_vector */ + struct net_device *netdev; /* netdev ring belongs to */ + struct device *dev; /* device for DMA mapping */ + struct fm10k_l2_accel __rcu *l2_accel; /* L2 acceleration list */ + void *desc; /* descriptor ring memory */ + union { + struct fm10k_tx_buffer *tx_buffer; + struct fm10k_rx_buffer *rx_buffer; + }; + u32 __iomem *tail; + unsigned long state; + dma_addr_t dma; /* phys. address of descriptor ring */ + unsigned int size; /* length in bytes */ + + u8 queue_index; /* needed for queue management */ + u8 reg_idx; /* holds the special value that gets + * the hardware register offset + * associated with this ring, which is + * different for DCB and RSS modes + */ + u8 qos_pc; /* priority class of queue */ + u16 vid; /* default vlan ID of queue */ + u16 count; /* amount of descriptors */ + + u16 next_to_alloc; + u16 next_to_use; + u16 next_to_clean; + + struct fm10k_queue_stats stats; + struct u64_stats_sync syncp; + union { + /* Tx */ + struct fm10k_tx_queue_stats tx_stats; + /* Rx */ + struct { + struct fm10k_rx_queue_stats rx_stats; + struct sk_buff *skb; + }; + }; +} ____cacheline_internodealigned_in_smp; + +struct fm10k_ring_container { + struct fm10k_ring *ring; /* pointer to linked list of rings */ + unsigned int total_bytes; /* total bytes processed this int */ + unsigned int total_packets; /* total packets processed this int */ + u16 work_limit; /* total work allowed per interrupt */ + u16 itr; /* interrupt throttle rate value */ + u8 count; /* total number of rings in vector */ +}; + +#define FM10K_ITR_MAX 0x0FFF /* maximum value for ITR */ +#define FM10K_ITR_10K 100 /* 100us */ +#define FM10K_ITR_20K 50 /* 50us */ +#define FM10K_ITR_ADAPTIVE 0x8000 /* adaptive interrupt moderation flag */ + +#define FM10K_ITR_ENABLE (FM10K_ITR_AUTOMASK | FM10K_ITR_MASK_CLEAR) + +static inline struct netdev_queue *txring_txq(const struct fm10k_ring *ring) +{ + return &ring->netdev->_tx[ring->queue_index]; +} + +/* iterator for handling rings in ring container */ +#define fm10k_for_each_ring(pos, head) \ + for (pos = &(head).ring[(head).count]; (--pos) >= (head).ring;) + +#define MAX_Q_VECTORS 256 +#define MIN_Q_VECTORS 1 +enum fm10k_non_q_vectors { + FM10K_MBX_VECTOR, +#define NON_Q_VECTORS_VF NON_Q_VECTORS_PF + NON_Q_VECTORS_PF +}; + +#define NON_Q_VECTORS(hw) (((hw)->mac.type == fm10k_mac_pf) ? \ + NON_Q_VECTORS_PF : \ + NON_Q_VECTORS_VF) +#define MIN_MSIX_COUNT(hw) (MIN_Q_VECTORS + NON_Q_VECTORS(hw)) + +struct fm10k_q_vector { + struct fm10k_intfc *interface; + u32 __iomem *itr; /* pointer to ITR register for this vector */ + u16 v_idx; /* index of q_vector within interface array */ + struct fm10k_ring_container rx, tx; + + struct napi_struct napi; + char name[IFNAMSIZ + 9]; + +#ifdef CONFIG_DEBUG_FS + struct dentry *dbg_q_vector; +#endif /* CONFIG_DEBUG_FS */ + struct rcu_head rcu; /* to avoid race with update stats on free */ + + /* for dynamic allocation of rings associated with this q_vector */ + struct fm10k_ring ring[0] ____cacheline_internodealigned_in_smp; +}; + +enum fm10k_ring_f_enum { + RING_F_RSS, + RING_F_QOS, + RING_F_ARRAY_SIZE /* must be last in enum set */ +}; + +struct fm10k_ring_feature { + u16 limit; /* upper limit on feature indices */ + u16 indices; /* current value of indices */ + u16 mask; /* Mask used for feature to ring mapping */ + u16 offset; /* offset to start of feature */ +}; + +struct fm10k_iov_data { + unsigned int num_vfs; + unsigned int next_vf_mbx; + struct rcu_head rcu; + struct fm10k_vf_info vf_info[0]; +}; + +#define fm10k_vxlan_port_for_each(vp, intfc) \ + list_for_each_entry(vp, &(intfc)->vxlan_port, list) +struct fm10k_vxlan_port { + struct list_head list; + sa_family_t sa_family; + __be16 port; +}; + +struct fm10k_intfc { + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; + struct net_device *netdev; + struct fm10k_l2_accel *l2_accel; /* pointer to L2 acceleration list */ + struct pci_dev *pdev; + unsigned long state; + + u32 flags; +#define FM10K_FLAG_RESET_REQUESTED (u32)(1 << 0) +#define FM10K_FLAG_RSS_FIELD_IPV4_UDP (u32)(1 << 1) +#define FM10K_FLAG_RSS_FIELD_IPV6_UDP (u32)(1 << 2) +#define FM10K_FLAG_RX_TS_ENABLED (u32)(1 << 3) +#define FM10K_FLAG_SWPRI_CONFIG (u32)(1 << 4) + int xcast_mode; + + /* Tx fast path data */ + int num_tx_queues; + u16 tx_itr; + + /* Rx fast path data */ + int num_rx_queues; + u16 rx_itr; + + /* TX */ + struct fm10k_ring *tx_ring[MAX_QUEUES] ____cacheline_aligned_in_smp; + + u64 restart_queue; + u64 tx_busy; + u64 tx_csum_errors; + u64 alloc_failed; + u64 rx_csum_errors; + u64 rx_errors; + + u64 tx_bytes_nic; + u64 tx_packets_nic; + u64 rx_bytes_nic; + u64 rx_packets_nic; + u64 rx_drops_nic; + u64 rx_overrun_pf; + u64 rx_overrun_vf; + u32 tx_timeout_count; + + /* RX */ + struct fm10k_ring *rx_ring[MAX_QUEUES]; + + /* Queueing vectors */ + struct fm10k_q_vector *q_vector[MAX_Q_VECTORS]; + struct msix_entry *msix_entries; + int num_q_vectors; /* current number of q_vectors for device */ + struct fm10k_ring_feature ring_feature[RING_F_ARRAY_SIZE]; + + /* SR-IOV information management structure */ + struct fm10k_iov_data *iov_data; + + struct fm10k_hw_stats stats; + struct fm10k_hw hw; + u32 __iomem *uc_addr; + u32 __iomem *sw_addr; + u16 msg_enable; + u16 tx_ring_count; + u16 rx_ring_count; + struct timer_list service_timer; + struct work_struct service_task; + unsigned long next_stats_update; + unsigned long next_tx_hang_check; + unsigned long last_reset; + unsigned long link_down_event; + bool host_ready; + + u32 reta[FM10K_RETA_SIZE]; + u32 rssrk[FM10K_RSSRK_SIZE]; + + /* VXLAN port tracking information */ + struct list_head vxlan_port; + +#ifdef CONFIG_DEBUG_FS + struct dentry *dbg_intfc; + +#endif /* CONFIG_DEBUG_FS */ + struct ptp_clock_info ptp_caps; + struct ptp_clock *ptp_clock; + + struct sk_buff_head ts_tx_skb_queue; + u32 tx_hwtstamp_timeouts; + + struct hwtstamp_config ts_config; + /* We are unable to actually adjust the clock beyond the frequency + * value. Once the clock is started there is no resetting it. As + * such we maintain a separate offset from the actual hardware clock + * to allow for offset adjustment. + */ + s64 ptp_adjust; + rwlock_t systime_lock; +#ifdef CONFIG_DCB + u8 pfc_en; +#endif + u8 rx_pause; + + /* GLORT resources in use by PF */ + u16 glort; + u16 glort_count; + + /* VLAN ID for updating multicast/unicast lists */ + u16 vid; +}; + +enum fm10k_state_t { + __FM10K_RESETTING, + __FM10K_DOWN, + __FM10K_SERVICE_SCHED, + __FM10K_SERVICE_DISABLE, + __FM10K_MBX_LOCK, + __FM10K_LINK_DOWN, +}; + +static inline void fm10k_mbx_lock(struct fm10k_intfc *interface) +{ + /* busy loop if we cannot obtain the lock as some calls + * such as ndo_set_rx_mode may be made in atomic context + */ + while (test_and_set_bit(__FM10K_MBX_LOCK, &interface->state)) + udelay(20); +} + +static inline void fm10k_mbx_unlock(struct fm10k_intfc *interface) +{ + /* flush memory to make sure state is correct */ + smp_mb__before_atomic(); + clear_bit(__FM10K_MBX_LOCK, &interface->state); +} + +static inline int fm10k_mbx_trylock(struct fm10k_intfc *interface) +{ + return !test_and_set_bit(__FM10K_MBX_LOCK, &interface->state); +} + +/* fm10k_test_staterr - test bits in Rx descriptor status and error fields */ +static inline __le32 fm10k_test_staterr(union fm10k_rx_desc *rx_desc, + const u32 stat_err_bits) +{ + return rx_desc->d.staterr & cpu_to_le32(stat_err_bits); +} + +/* fm10k_desc_unused - calculate if we have unused descriptors */ +static inline u16 fm10k_desc_unused(struct fm10k_ring *ring) +{ + s16 unused = ring->next_to_clean - ring->next_to_use - 1; + + return likely(unused < 0) ? unused + ring->count : unused; +} + +#define FM10K_TX_DESC(R, i) \ + (&(((struct fm10k_tx_desc *)((R)->desc))[i])) +#define FM10K_RX_DESC(R, i) \ + (&(((union fm10k_rx_desc *)((R)->desc))[i])) + +#define FM10K_MAX_TXD_PWR 14 +#define FM10K_MAX_DATA_PER_TXD (1 << FM10K_MAX_TXD_PWR) + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), FM10K_MAX_DATA_PER_TXD) +#define DESC_NEEDED (MAX_SKB_FRAGS + 4) + +enum fm10k_tx_flags { + /* Tx offload flags */ + FM10K_TX_FLAGS_CSUM = 0x01, +}; + +/* This structure is stored as little endian values as that is the native + * format of the Rx descriptor. The ordering of these fields is reversed + * from the actual ftag header to allow for a single bswap to take care + * of placing all of the values in network order + */ +union fm10k_ftag_info { + __le64 ftag; + struct { + /* dglort and sglort combined into a single 32bit desc read */ + __le32 glort; + /* upper 16 bits of vlan are reserved 0 for swpri_type_user */ + __le32 vlan; + } d; + struct { + __le16 dglort; + __le16 sglort; + __le16 vlan; + __le16 swpri_type_user; + } w; +}; + +struct fm10k_cb { + union { + __le64 tstamp; + unsigned long ts_tx_timeout; + }; + union fm10k_ftag_info fi; +}; + +#define FM10K_CB(skb) ((struct fm10k_cb *)(skb)->cb) + +/* main */ +extern char fm10k_driver_name[]; +extern const char fm10k_driver_version[]; +int fm10k_init_queueing_scheme(struct fm10k_intfc *interface); +void fm10k_clear_queueing_scheme(struct fm10k_intfc *interface); +netdev_tx_t fm10k_xmit_frame_ring(struct sk_buff *skb, + struct fm10k_ring *tx_ring); +void fm10k_tx_timeout_reset(struct fm10k_intfc *interface); +bool fm10k_check_tx_hang(struct fm10k_ring *tx_ring); +void fm10k_alloc_rx_buffers(struct fm10k_ring *rx_ring, u16 cleaned_count); + +/* PCI */ +void fm10k_mbx_free_irq(struct fm10k_intfc *); +int fm10k_mbx_request_irq(struct fm10k_intfc *); +void fm10k_qv_free_irq(struct fm10k_intfc *interface); +int fm10k_qv_request_irq(struct fm10k_intfc *interface); +int fm10k_register_pci_driver(void); +void fm10k_unregister_pci_driver(void); +void fm10k_up(struct fm10k_intfc *interface); +void fm10k_down(struct fm10k_intfc *interface); +void fm10k_update_stats(struct fm10k_intfc *interface); +void fm10k_service_event_schedule(struct fm10k_intfc *interface); +void fm10k_update_rx_drop_en(struct fm10k_intfc *interface); + +/* Netdev */ +struct net_device *fm10k_alloc_netdev(void); +int fm10k_setup_rx_resources(struct fm10k_ring *); +int fm10k_setup_tx_resources(struct fm10k_ring *); +void fm10k_free_rx_resources(struct fm10k_ring *); +void fm10k_free_tx_resources(struct fm10k_ring *); +void fm10k_clean_all_rx_rings(struct fm10k_intfc *); +void fm10k_clean_all_tx_rings(struct fm10k_intfc *); +void fm10k_unmap_and_free_tx_resource(struct fm10k_ring *, + struct fm10k_tx_buffer *); +void fm10k_restore_rx_state(struct fm10k_intfc *); +void fm10k_reset_rx_state(struct fm10k_intfc *); +int fm10k_setup_tc(struct net_device *dev, u8 tc); +int fm10k_open(struct net_device *netdev); +int fm10k_close(struct net_device *netdev); + +/* Ethtool */ +void fm10k_set_ethtool_ops(struct net_device *dev); + +/* IOV */ +s32 fm10k_iov_event(struct fm10k_intfc *interface); +s32 fm10k_iov_mbx(struct fm10k_intfc *interface); +void fm10k_iov_suspend(struct pci_dev *pdev); +int fm10k_iov_resume(struct pci_dev *pdev); +void fm10k_iov_disable(struct pci_dev *pdev); +int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs); +s32 fm10k_iov_update_pvid(struct fm10k_intfc *interface, u16 glort, u16 pvid); +int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac); +int fm10k_ndo_set_vf_vlan(struct net_device *netdev, + int vf_idx, u16 vid, u8 qos); +int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, int rate, + int unused); +int fm10k_ndo_get_vf_config(struct net_device *netdev, + int vf_idx, struct ifla_vf_info *ivi); + +/* DebugFS */ +#ifdef CONFIG_DEBUG_FS +void fm10k_dbg_q_vector_init(struct fm10k_q_vector *q_vector); +void fm10k_dbg_q_vector_exit(struct fm10k_q_vector *q_vector); +void fm10k_dbg_intfc_init(struct fm10k_intfc *interface); +void fm10k_dbg_intfc_exit(struct fm10k_intfc *interface); +void fm10k_dbg_init(void); +void fm10k_dbg_exit(void); +#else +static inline void fm10k_dbg_q_vector_init(struct fm10k_q_vector *q_vector) {} +static inline void fm10k_dbg_q_vector_exit(struct fm10k_q_vector *q_vector) {} +static inline void fm10k_dbg_intfc_init(struct fm10k_intfc *interface) {} +static inline void fm10k_dbg_intfc_exit(struct fm10k_intfc *interface) {} +static inline void fm10k_dbg_init(void) {} +static inline void fm10k_dbg_exit(void) {} +#endif /* CONFIG_DEBUG_FS */ + +/* Time Stamping */ +void fm10k_systime_to_hwtstamp(struct fm10k_intfc *interface, + struct skb_shared_hwtstamps *hwtstamp, + u64 systime); +void fm10k_ts_tx_enqueue(struct fm10k_intfc *interface, struct sk_buff *skb); +void fm10k_ts_tx_hwtstamp(struct fm10k_intfc *interface, __le16 dglort, + u64 systime); +void fm10k_ts_reset(struct fm10k_intfc *interface); +void fm10k_ts_init(struct fm10k_intfc *interface); +void fm10k_ts_tx_subtask(struct fm10k_intfc *interface); +void fm10k_ptp_register(struct fm10k_intfc *interface); +void fm10k_ptp_unregister(struct fm10k_intfc *interface); +int fm10k_get_ts_config(struct net_device *netdev, struct ifreq *ifr); +int fm10k_set_ts_config(struct net_device *netdev, struct ifreq *ifr); + +/* DCB */ +void fm10k_dcbnl_set_ops(struct net_device *dev); +#endif /* _FM10K_H_ */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_common.c b/drivers/net/ethernet/intel/fm10k/fm10k_common.c new file mode 100644 index 00000000000..bf19dccd428 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_common.c @@ -0,0 +1,534 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k_common.h" + +/** + * fm10k_get_bus_info_generic - Generic set PCI bus info + * @hw: pointer to hardware structure + * + * Gets the PCI bus info (speed, width, type) then calls helper function to + * store this data within the fm10k_hw structure. + **/ +s32 fm10k_get_bus_info_generic(struct fm10k_hw *hw) +{ + u16 link_cap, link_status, device_cap, device_control; + + /* Get the maximum link width and speed from PCIe config space */ + link_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_CAP); + + switch (link_cap & FM10K_PCIE_LINK_WIDTH) { + case FM10K_PCIE_LINK_WIDTH_1: + hw->bus_caps.width = fm10k_bus_width_pcie_x1; + break; + case FM10K_PCIE_LINK_WIDTH_2: + hw->bus_caps.width = fm10k_bus_width_pcie_x2; + break; + case FM10K_PCIE_LINK_WIDTH_4: + hw->bus_caps.width = fm10k_bus_width_pcie_x4; + break; + case FM10K_PCIE_LINK_WIDTH_8: + hw->bus_caps.width = fm10k_bus_width_pcie_x8; + break; + default: + hw->bus_caps.width = fm10k_bus_width_unknown; + break; + } + + switch (link_cap & FM10K_PCIE_LINK_SPEED) { + case FM10K_PCIE_LINK_SPEED_2500: + hw->bus_caps.speed = fm10k_bus_speed_2500; + break; + case FM10K_PCIE_LINK_SPEED_5000: + hw->bus_caps.speed = fm10k_bus_speed_5000; + break; + case FM10K_PCIE_LINK_SPEED_8000: + hw->bus_caps.speed = fm10k_bus_speed_8000; + break; + default: + hw->bus_caps.speed = fm10k_bus_speed_unknown; + break; + } + + /* Get the PCIe maximum payload size for the PCIe function */ + device_cap = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CAP); + + switch (device_cap & FM10K_PCIE_DEV_CAP_PAYLOAD) { + case FM10K_PCIE_DEV_CAP_PAYLOAD_128: + hw->bus_caps.payload = fm10k_bus_payload_128; + break; + case FM10K_PCIE_DEV_CAP_PAYLOAD_256: + hw->bus_caps.payload = fm10k_bus_payload_256; + break; + case FM10K_PCIE_DEV_CAP_PAYLOAD_512: + hw->bus_caps.payload = fm10k_bus_payload_512; + break; + default: + hw->bus_caps.payload = fm10k_bus_payload_unknown; + break; + } + + /* Get the negotiated link width and speed from PCIe config space */ + link_status = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_LINK_STATUS); + + switch (link_status & FM10K_PCIE_LINK_WIDTH) { + case FM10K_PCIE_LINK_WIDTH_1: + hw->bus.width = fm10k_bus_width_pcie_x1; + break; + case FM10K_PCIE_LINK_WIDTH_2: + hw->bus.width = fm10k_bus_width_pcie_x2; + break; + case FM10K_PCIE_LINK_WIDTH_4: + hw->bus.width = fm10k_bus_width_pcie_x4; + break; + case FM10K_PCIE_LINK_WIDTH_8: + hw->bus.width = fm10k_bus_width_pcie_x8; + break; + default: + hw->bus.width = fm10k_bus_width_unknown; + break; + } + + switch (link_status & FM10K_PCIE_LINK_SPEED) { + case FM10K_PCIE_LINK_SPEED_2500: + hw->bus.speed = fm10k_bus_speed_2500; + break; + case FM10K_PCIE_LINK_SPEED_5000: + hw->bus.speed = fm10k_bus_speed_5000; + break; + case FM10K_PCIE_LINK_SPEED_8000: + hw->bus.speed = fm10k_bus_speed_8000; + break; + default: + hw->bus.speed = fm10k_bus_speed_unknown; + break; + } + + /* Get the negotiated PCIe maximum payload size for the PCIe function */ + device_control = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_DEV_CTRL); + + switch (device_control & FM10K_PCIE_DEV_CTRL_PAYLOAD) { + case FM10K_PCIE_DEV_CTRL_PAYLOAD_128: + hw->bus.payload = fm10k_bus_payload_128; + break; + case FM10K_PCIE_DEV_CTRL_PAYLOAD_256: + hw->bus.payload = fm10k_bus_payload_256; + break; + case FM10K_PCIE_DEV_CTRL_PAYLOAD_512: + hw->bus.payload = fm10k_bus_payload_512; + break; + default: + hw->bus.payload = fm10k_bus_payload_unknown; + break; + } + + return 0; +} + +static u16 fm10k_get_pcie_msix_count_generic(struct fm10k_hw *hw) +{ + u16 msix_count; + + /* read in value from MSI-X capability register */ + msix_count = fm10k_read_pci_cfg_word(hw, FM10K_PCI_MSIX_MSG_CTRL); + msix_count &= FM10K_PCI_MSIX_MSG_CTRL_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW */ + msix_count++; + + if (msix_count > FM10K_MAX_MSIX_VECTORS) + msix_count = FM10K_MAX_MSIX_VECTORS; + + return msix_count; +} + +/** + * fm10k_get_invariants_generic - Inits constant values + * @hw: pointer to the hardware structure + * + * Initialize the common invariants for the device. + **/ +s32 fm10k_get_invariants_generic(struct fm10k_hw *hw) +{ + struct fm10k_mac_info *mac = &hw->mac; + + /* initialize GLORT state to avoid any false hits */ + mac->dglort_map = FM10K_DGLORTMAP_NONE; + + /* record maximum number of MSI-X vectors */ + mac->max_msix_vectors = fm10k_get_pcie_msix_count_generic(hw); + + return 0; +} + +/** + * fm10k_start_hw_generic - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * This function sets the Tx ready flag to indicate that the Tx path has + * been initialized. + **/ +s32 fm10k_start_hw_generic(struct fm10k_hw *hw) +{ + /* set flag indicating we are beginning Tx */ + hw->mac.tx_ready = true; + + return 0; +} + +/** + * fm10k_disable_queues_generic - Stop Tx/Rx queues + * @hw: pointer to hardware structure + * @q_cnt: number of queues to be disabled + * + **/ +s32 fm10k_disable_queues_generic(struct fm10k_hw *hw, u16 q_cnt) +{ + u32 reg; + u16 i, time; + + /* clear tx_ready to prevent any false hits for reset */ + hw->mac.tx_ready = false; + + /* clear the enable bit for all rings */ + for (i = 0; i < q_cnt; i++) { + reg = fm10k_read_reg(hw, FM10K_TXDCTL(i)); + fm10k_write_reg(hw, FM10K_TXDCTL(i), + reg & ~FM10K_TXDCTL_ENABLE); + reg = fm10k_read_reg(hw, FM10K_RXQCTL(i)); + fm10k_write_reg(hw, FM10K_RXQCTL(i), + reg & ~FM10K_RXQCTL_ENABLE); + } + + fm10k_write_flush(hw); + udelay(1); + + /* loop through all queues to verify that they are all disabled */ + for (i = 0, time = FM10K_QUEUE_DISABLE_TIMEOUT; time;) { + /* if we are at end of rings all rings are disabled */ + if (i == q_cnt) + return 0; + + /* if queue enables cleared, then move to next ring pair */ + reg = fm10k_read_reg(hw, FM10K_TXDCTL(i)); + if (!~reg || !(reg & FM10K_TXDCTL_ENABLE)) { + reg = fm10k_read_reg(hw, FM10K_RXQCTL(i)); + if (!~reg || !(reg & FM10K_RXQCTL_ENABLE)) { + i++; + continue; + } + } + + /* decrement time and wait 1 usec */ + time--; + if (time) + udelay(1); + } + + return FM10K_ERR_REQUESTS_PENDING; +} + +/** + * fm10k_stop_hw_generic - Stop Tx/Rx units + * @hw: pointer to hardware structure + * + **/ +s32 fm10k_stop_hw_generic(struct fm10k_hw *hw) +{ + return fm10k_disable_queues_generic(hw, hw->mac.max_queues); +} + +/** + * fm10k_read_hw_stats_32b - Reads value of 32-bit registers + * @hw: pointer to the hardware structure + * @addr: address of register containing a 32-bit value + * + * Function reads the content of the register and returns the delta + * between the base and the current value. + * **/ +u32 fm10k_read_hw_stats_32b(struct fm10k_hw *hw, u32 addr, + struct fm10k_hw_stat *stat) +{ + u32 delta = fm10k_read_reg(hw, addr) - stat->base_l; + + if (FM10K_REMOVED(hw->hw_addr)) + stat->base_h = 0; + + return delta; +} + +/** + * fm10k_read_hw_stats_48b - Reads value of 48-bit registers + * @hw: pointer to the hardware structure + * @addr: address of register containing the lower 32-bit value + * + * Function reads the content of 2 registers, combined to represent a 48-bit + * statistical value. Extra processing is required to handle overflowing. + * Finally, a delta value is returned representing the difference between the + * values stored in registers and values stored in the statistic counters. + * **/ +static u64 fm10k_read_hw_stats_48b(struct fm10k_hw *hw, u32 addr, + struct fm10k_hw_stat *stat) +{ + u32 count_l; + u32 count_h; + u32 count_tmp; + u64 delta; + + count_h = fm10k_read_reg(hw, addr + 1); + + /* Check for overflow */ + do { + count_tmp = count_h; + count_l = fm10k_read_reg(hw, addr); + count_h = fm10k_read_reg(hw, addr + 1); + } while (count_h != count_tmp); + + delta = ((u64)(count_h - stat->base_h) << 32) + count_l; + delta -= stat->base_l; + + return delta & FM10K_48_BIT_MASK; +} + +/** + * fm10k_update_hw_base_48b - Updates 48-bit statistic base value + * @stat: pointer to the hardware statistic structure + * @delta: value to be updated into the hardware statistic structure + * + * Function receives a value and determines if an update is required based on + * a delta calculation. Only the base value will be updated. + **/ +static void fm10k_update_hw_base_48b(struct fm10k_hw_stat *stat, u64 delta) +{ + if (!delta) + return; + + /* update lower 32 bits */ + delta += stat->base_l; + stat->base_l = (u32)delta; + + /* update upper 32 bits */ + stat->base_h += (u32)(delta >> 32); +} + +/** + * fm10k_update_hw_stats_tx_q - Updates TX queue statistics counters + * @hw: pointer to the hardware structure + * @q: pointer to the ring of hardware statistics queue + * @idx: index pointing to the start of the ring iteration + * + * Function updates the TX queue statistics counters that are related to the + * hardware. + **/ +static void fm10k_update_hw_stats_tx_q(struct fm10k_hw *hw, + struct fm10k_hw_stats_q *q, + u32 idx) +{ + u32 id_tx, id_tx_prev, tx_packets; + u64 tx_bytes = 0; + + /* Retrieve TX Owner Data */ + id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx)); + + /* Process TX Ring */ + do { + tx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPTC(idx), + &q->tx_packets); + + if (tx_packets) + tx_bytes = fm10k_read_hw_stats_48b(hw, + FM10K_QBTC_L(idx), + &q->tx_bytes); + + /* Re-Check Owner Data */ + id_tx_prev = id_tx; + id_tx = fm10k_read_reg(hw, FM10K_TXQCTL(idx)); + } while ((id_tx ^ id_tx_prev) & FM10K_TXQCTL_ID_MASK); + + /* drop non-ID bits and set VALID ID bit */ + id_tx &= FM10K_TXQCTL_ID_MASK; + id_tx |= FM10K_STAT_VALID; + + /* update packet counts */ + if (q->tx_stats_idx == id_tx) { + q->tx_packets.count += tx_packets; + q->tx_bytes.count += tx_bytes; + } + + /* update bases and record ID */ + fm10k_update_hw_base_32b(&q->tx_packets, tx_packets); + fm10k_update_hw_base_48b(&q->tx_bytes, tx_bytes); + + q->tx_stats_idx = id_tx; +} + +/** + * fm10k_update_hw_stats_rx_q - Updates RX queue statistics counters + * @hw: pointer to the hardware structure + * @q: pointer to the ring of hardware statistics queue + * @idx: index pointing to the start of the ring iteration + * + * Function updates the RX queue statistics counters that are related to the + * hardware. + **/ +static void fm10k_update_hw_stats_rx_q(struct fm10k_hw *hw, + struct fm10k_hw_stats_q *q, + u32 idx) +{ + u32 id_rx, id_rx_prev, rx_packets, rx_drops; + u64 rx_bytes = 0; + + /* Retrieve RX Owner Data */ + id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx)); + + /* Process RX Ring*/ + do { + rx_drops = fm10k_read_hw_stats_32b(hw, FM10K_QPRDC(idx), + &q->rx_drops); + + rx_packets = fm10k_read_hw_stats_32b(hw, FM10K_QPRC(idx), + &q->rx_packets); + + if (rx_packets) + rx_bytes = fm10k_read_hw_stats_48b(hw, + FM10K_QBRC_L(idx), + &q->rx_bytes); + + /* Re-Check Owner Data */ + id_rx_prev = id_rx; + id_rx = fm10k_read_reg(hw, FM10K_RXQCTL(idx)); + } while ((id_rx ^ id_rx_prev) & FM10K_RXQCTL_ID_MASK); + + /* drop non-ID bits and set VALID ID bit */ + id_rx &= FM10K_RXQCTL_ID_MASK; + id_rx |= FM10K_STAT_VALID; + + /* update packet counts */ + if (q->rx_stats_idx == id_rx) { + q->rx_drops.count += rx_drops; + q->rx_packets.count += rx_packets; + q->rx_bytes.count += rx_bytes; + } + + /* update bases and record ID */ + fm10k_update_hw_base_32b(&q->rx_drops, rx_drops); + fm10k_update_hw_base_32b(&q->rx_packets, rx_packets); + fm10k_update_hw_base_48b(&q->rx_bytes, rx_bytes); + + q->rx_stats_idx = id_rx; +} + +/** + * fm10k_update_hw_stats_q - Updates queue statistics counters + * @hw: pointer to the hardware structure + * @q: pointer to the ring of hardware statistics queue + * @idx: index pointing to the start of the ring iteration + * @count: number of queues to iterate over + * + * Function updates the queue statistics counters that are related to the + * hardware. + **/ +void fm10k_update_hw_stats_q(struct fm10k_hw *hw, struct fm10k_hw_stats_q *q, + u32 idx, u32 count) +{ + u32 i; + + for (i = 0; i < count; i++, idx++, q++) { + fm10k_update_hw_stats_tx_q(hw, q, idx); + fm10k_update_hw_stats_rx_q(hw, q, idx); + } +} + +/** + * fm10k_unbind_hw_stats_q - Unbind the queue counters from their queues + * @hw: pointer to the hardware structure + * @q: pointer to the ring of hardware statistics queue + * @idx: index pointing to the start of the ring iteration + * @count: number of queues to iterate over + * + * Function invalidates the index values for the queues so any updates that + * may have happened are ignored and the base for the queue stats is reset. + **/ + +void fm10k_unbind_hw_stats_q(struct fm10k_hw_stats_q *q, u32 idx, u32 count) +{ + u32 i; + + for (i = 0; i < count; i++, idx++, q++) { + q->rx_stats_idx = 0; + q->tx_stats_idx = 0; + } +} + +/** + * fm10k_get_host_state_generic - Returns the state of the host + * @hw: pointer to hardware structure + * @host_ready: pointer to boolean value that will record host state + * + * This function will check the health of the mailbox and Tx queue 0 + * in order to determine if we should report that the link is up or not. + **/ +s32 fm10k_get_host_state_generic(struct fm10k_hw *hw, bool *host_ready) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + struct fm10k_mac_info *mac = &hw->mac; + s32 ret_val = 0; + u32 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(0)); + + /* process upstream mailbox in case interrupts were disabled */ + mbx->ops.process(hw, mbx); + + /* If Tx is no longer enabled link should come down */ + if (!(~txdctl) || !(txdctl & FM10K_TXDCTL_ENABLE)) + mac->get_host_state = true; + + /* exit if not checking for link, or link cannot be changed */ + if (!mac->get_host_state || !(~txdctl)) + goto out; + + /* if we somehow dropped the Tx enable we should reset */ + if (hw->mac.tx_ready && !(txdctl & FM10K_TXDCTL_ENABLE)) { + ret_val = FM10K_ERR_RESET_REQUESTED; + goto out; + } + + /* if Mailbox timed out we should request reset */ + if (!mbx->timeout) { + ret_val = FM10K_ERR_RESET_REQUESTED; + goto out; + } + + /* verify Mailbox is still valid */ + if (!mbx->ops.tx_ready(mbx, FM10K_VFMBX_MSG_MTU)) + goto out; + + /* interface cannot receive traffic without logical ports */ + if (mac->dglort_map == FM10K_DGLORTMAP_NONE) + goto out; + + /* if we passed all the tests above then the switch is ready and we no + * longer need to check for link + */ + mac->get_host_state = false; + +out: + *host_ready = !mac->get_host_state; + return ret_val; +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_common.h b/drivers/net/ethernet/intel/fm10k/fm10k_common.h new file mode 100644 index 00000000000..45e4e5b1f20 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_common.h @@ -0,0 +1,65 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#ifndef _FM10K_COMMON_H_ +#define _FM10K_COMMON_H_ + +#include "fm10k_type.h" + +#define FM10K_REMOVED(hw_addr) unlikely(!(hw_addr)) + +/* PCI configuration read */ +u16 fm10k_read_pci_cfg_word(struct fm10k_hw *hw, u32 reg); + +/* read operations, indexed using DWORDS */ +u32 fm10k_read_reg(struct fm10k_hw *hw, int reg); + +/* write operations, indexed using DWORDS */ +#define fm10k_write_reg(hw, reg, val) \ +do { \ + u32 __iomem *hw_addr = ACCESS_ONCE((hw)->hw_addr); \ + if (!FM10K_REMOVED(hw_addr)) \ + writel((val), &hw_addr[(reg)]); \ +} while (0) + +/* Switch register write operations, index using DWORDS */ +#define fm10k_write_sw_reg(hw, reg, val) \ +do { \ + u32 __iomem *sw_addr = ACCESS_ONCE((hw)->sw_addr); \ + if (!FM10K_REMOVED(sw_addr)) \ + writel((val), &sw_addr[(reg)]); \ +} while (0) + +/* read ctrl register which has no clear on read fields as PCIe flush */ +#define fm10k_write_flush(hw) fm10k_read_reg((hw), FM10K_CTRL) +s32 fm10k_get_bus_info_generic(struct fm10k_hw *hw); +s32 fm10k_get_invariants_generic(struct fm10k_hw *hw); +s32 fm10k_disable_queues_generic(struct fm10k_hw *hw, u16 q_cnt); +s32 fm10k_start_hw_generic(struct fm10k_hw *hw); +s32 fm10k_stop_hw_generic(struct fm10k_hw *hw); +u32 fm10k_read_hw_stats_32b(struct fm10k_hw *hw, u32 addr, + struct fm10k_hw_stat *stat); +#define fm10k_update_hw_base_32b(stat, delta) ((stat)->base_l += (delta)) +void fm10k_update_hw_stats_q(struct fm10k_hw *hw, struct fm10k_hw_stats_q *q, + u32 idx, u32 count); +#define fm10k_unbind_hw_stats_32b(s) ((s)->base_h = 0) +void fm10k_unbind_hw_stats_q(struct fm10k_hw_stats_q *q, u32 idx, u32 count); +s32 fm10k_get_host_state_generic(struct fm10k_hw *hw, bool *host_ready); +#endif /* _FM10K_COMMON_H_ */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c b/drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c new file mode 100644 index 00000000000..212a92dad22 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_dcbnl.c @@ -0,0 +1,174 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k.h" + +#ifdef CONFIG_DCB +/** + * fm10k_dcbnl_ieee_getets - get the ETS configuration for the device + * @dev: netdev interface for the device + * @ets: ETS structure to push configuration to + **/ +static int fm10k_dcbnl_ieee_getets(struct net_device *dev, struct ieee_ets *ets) +{ + int i; + + /* we support 8 TCs in all modes */ + ets->ets_cap = IEEE_8021QAZ_MAX_TCS; + ets->cbs = 0; + + /* we only support strict priority and cannot do traffic shaping */ + memset(ets->tc_tx_bw, 0, sizeof(ets->tc_tx_bw)); + memset(ets->tc_rx_bw, 0, sizeof(ets->tc_rx_bw)); + memset(ets->tc_tsa, IEEE_8021QAZ_TSA_STRICT, sizeof(ets->tc_tsa)); + + /* populate the prio map based on the netdev */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + ets->prio_tc[i] = netdev_get_prio_tc_map(dev, i); + + return 0; +} + +/** + * fm10k_dcbnl_ieee_setets - set the ETS configuration for the device + * @dev: netdev interface for the device + * @ets: ETS structure to pull configuration from + **/ +static int fm10k_dcbnl_ieee_setets(struct net_device *dev, struct ieee_ets *ets) +{ + u8 num_tc = 0; + int i, err; + + /* verify type and determine num_tcs needed */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + if (ets->tc_tx_bw[i] || ets->tc_rx_bw[i]) + return -EINVAL; + if (ets->tc_tsa[i] != IEEE_8021QAZ_TSA_STRICT) + return -EINVAL; + if (ets->prio_tc[i] > num_tc) + num_tc = ets->prio_tc[i]; + } + + /* if requested TC is greater than 0 then num_tcs is max + 1 */ + if (num_tc) + num_tc++; + + if (num_tc > IEEE_8021QAZ_MAX_TCS) + return -EINVAL; + + /* update TC hardware mapping if necessary */ + if (num_tc != netdev_get_num_tc(dev)) { + err = fm10k_setup_tc(dev, num_tc); + if (err) + return err; + } + + /* update priority mapping */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + netdev_set_prio_tc_map(dev, i, ets->prio_tc[i]); + + return 0; +} + +/** + * fm10k_dcbnl_ieee_getpfc - get the PFC configuration for the device + * @dev: netdev interface for the device + * @pfc: PFC structure to push configuration to + **/ +static int fm10k_dcbnl_ieee_getpfc(struct net_device *dev, struct ieee_pfc *pfc) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + /* record flow control max count and state of TCs */ + pfc->pfc_cap = IEEE_8021QAZ_MAX_TCS; + pfc->pfc_en = interface->pfc_en; + + return 0; +} + +/** + * fm10k_dcbnl_ieee_setpfc - set the PFC configuration for the device + * @dev: netdev interface for the device + * @pfc: PFC structure to pull configuration from + **/ +static int fm10k_dcbnl_ieee_setpfc(struct net_device *dev, struct ieee_pfc *pfc) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + /* record PFC configuration to interface */ + interface->pfc_en = pfc->pfc_en; + + /* if we are running update the drop_en state for all queues */ + if (netif_running(dev)) + fm10k_update_rx_drop_en(interface); + + return 0; +} + +/** + * fm10k_dcbnl_ieee_getdcbx - get the DCBX configuration for the device + * @dev: netdev interface for the device + * + * Returns that we support only IEEE DCB for this interface + **/ +static u8 fm10k_dcbnl_getdcbx(struct net_device *dev) +{ + return DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE; +} + +/** + * fm10k_dcbnl_ieee_setdcbx - get the DCBX configuration for the device + * @dev: netdev interface for the device + * @mode: new mode for this device + * + * Returns error on attempt to enable anything but IEEE DCB for this interface + **/ +static u8 fm10k_dcbnl_setdcbx(struct net_device *dev, u8 mode) +{ + return (mode != (DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_IEEE)) ? 1 : 0; +} + +static const struct dcbnl_rtnl_ops fm10k_dcbnl_ops = { + .ieee_getets = fm10k_dcbnl_ieee_getets, + .ieee_setets = fm10k_dcbnl_ieee_setets, + .ieee_getpfc = fm10k_dcbnl_ieee_getpfc, + .ieee_setpfc = fm10k_dcbnl_ieee_setpfc, + + .getdcbx = fm10k_dcbnl_getdcbx, + .setdcbx = fm10k_dcbnl_setdcbx, +}; + +#endif /* CONFIG_DCB */ +/** + * fm10k_dcbnl_set_ops - Configures dcbnl ops pointer for netdev + * @dev: netdev interface for the device + * + * Enables PF for DCB by assigning DCBNL ops pointer. + **/ +void fm10k_dcbnl_set_ops(struct net_device *dev) +{ +#ifdef CONFIG_DCB + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + + if (hw->mac.type == fm10k_mac_pf) + dev->dcbnl_ops = &fm10k_dcbnl_ops; +#endif /* CONFIG_DCB */ +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_debugfs.c b/drivers/net/ethernet/intel/fm10k/fm10k_debugfs.c new file mode 100644 index 00000000000..4327f86218b --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_debugfs.c @@ -0,0 +1,259 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#ifdef CONFIG_DEBUG_FS + +#include "fm10k.h" + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +static struct dentry *dbg_root; + +/* Descriptor Seq Functions */ + +static void *fm10k_dbg_desc_seq_start(struct seq_file *s, loff_t *pos) +{ + struct fm10k_ring *ring = s->private; + + return (*pos < ring->count) ? pos : NULL; +} + +static void *fm10k_dbg_desc_seq_next(struct seq_file *s, void *v, loff_t *pos) +{ + struct fm10k_ring *ring = s->private; + + return (++(*pos) < ring->count) ? pos : NULL; +} + +static void fm10k_dbg_desc_seq_stop(struct seq_file *s, void *v) +{ + /* Do nothing. */ +} + +static void fm10k_dbg_desc_break(struct seq_file *s, int i) +{ + while (i--) + seq_puts(s, "-"); + + seq_puts(s, "\n"); +} + +static int fm10k_dbg_tx_desc_seq_show(struct seq_file *s, void *v) +{ + struct fm10k_ring *ring = s->private; + int i = *(loff_t *)v; + static const char tx_desc_hdr[] = + "DES BUFFER_ADDRESS LENGTH VLAN MSS HDRLEN FLAGS\n"; + + /* Generate header */ + if (!i) { + seq_printf(s, tx_desc_hdr); + fm10k_dbg_desc_break(s, sizeof(tx_desc_hdr) - 1); + } + + /* Validate descriptor allocation */ + if (!ring->desc) { + seq_printf(s, "%03X Descriptor ring not allocated.\n", i); + } else { + struct fm10k_tx_desc *txd = FM10K_TX_DESC(ring, i); + + seq_printf(s, "%03X %#018llx %#06x %#06x %#06x %#06x %#04x\n", + i, txd->buffer_addr, txd->buflen, txd->vlan, + txd->mss, txd->hdrlen, txd->flags); + } + + return 0; +} + +static int fm10k_dbg_rx_desc_seq_show(struct seq_file *s, void *v) +{ + struct fm10k_ring *ring = s->private; + int i = *(loff_t *)v; + static const char rx_desc_hdr[] = + "DES DATA RSS STATERR LENGTH VLAN DGLORT SGLORT TIMESTAMP\n"; + + /* Generate header */ + if (!i) { + seq_printf(s, rx_desc_hdr); + fm10k_dbg_desc_break(s, sizeof(rx_desc_hdr) - 1); + } + + /* Validate descriptor allocation */ + if (!ring->desc) { + seq_printf(s, "%03X Descriptor ring not allocated.\n", i); + } else { + union fm10k_rx_desc *rxd = FM10K_RX_DESC(ring, i); + + seq_printf(s, + "%03X %#010x %#010x %#010x %#06x %#06x %#06x %#06x %#018llx\n", + i, rxd->d.data, rxd->d.rss, rxd->d.staterr, + rxd->w.length, rxd->w.vlan, rxd->w.dglort, + rxd->w.sglort, rxd->q.timestamp); + } + + return 0; +} + +static const struct seq_operations fm10k_dbg_tx_desc_seq_ops = { + .start = fm10k_dbg_desc_seq_start, + .next = fm10k_dbg_desc_seq_next, + .stop = fm10k_dbg_desc_seq_stop, + .show = fm10k_dbg_tx_desc_seq_show, +}; + +static const struct seq_operations fm10k_dbg_rx_desc_seq_ops = { + .start = fm10k_dbg_desc_seq_start, + .next = fm10k_dbg_desc_seq_next, + .stop = fm10k_dbg_desc_seq_stop, + .show = fm10k_dbg_rx_desc_seq_show, +}; + +static int fm10k_dbg_desc_open(struct inode *inode, struct file *filep) +{ + struct fm10k_ring *ring = inode->i_private; + struct fm10k_q_vector *q_vector = ring->q_vector; + const struct seq_operations *desc_seq_ops; + int err; + + if (ring < q_vector->rx.ring) + desc_seq_ops = &fm10k_dbg_tx_desc_seq_ops; + else + desc_seq_ops = &fm10k_dbg_rx_desc_seq_ops; + + err = seq_open(filep, desc_seq_ops); + if (err) + return err; + + ((struct seq_file *)filep->private_data)->private = ring; + + return 0; +} + +static const struct file_operations fm10k_dbg_desc_fops = { + .owner = THIS_MODULE, + .open = fm10k_dbg_desc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +/** + * fm10k_dbg_q_vector_init - setup debugfs for the q_vectors + * @q_vector: q_vector to allocate directories for + * + * A folder is created for each q_vector found. In each q_vector + * folder, a debugfs file is created for each tx and rx ring + * allocated to the q_vector. + **/ +void fm10k_dbg_q_vector_init(struct fm10k_q_vector *q_vector) +{ + struct fm10k_intfc *interface = q_vector->interface; + char name[16]; + int i; + + if (!interface->dbg_intfc) + return; + + /* Generate a folder for each q_vector */ + sprintf(name, "q_vector.%03d", q_vector->v_idx); + + q_vector->dbg_q_vector = debugfs_create_dir(name, interface->dbg_intfc); + if (!q_vector->dbg_q_vector) + return; + + /* Generate a file for each rx ring in the q_vector */ + for (i = 0; i < q_vector->tx.count; i++) { + struct fm10k_ring *ring = &q_vector->tx.ring[i]; + + sprintf(name, "tx_ring.%03d", ring->queue_index); + + debugfs_create_file(name, 0600, + q_vector->dbg_q_vector, ring, + &fm10k_dbg_desc_fops); + } + + /* Generate a file for each rx ring in the q_vector */ + for (i = 0; i < q_vector->rx.count; i++) { + struct fm10k_ring *ring = &q_vector->rx.ring[i]; + + sprintf(name, "rx_ring.%03d", ring->queue_index); + + debugfs_create_file(name, 0600, + q_vector->dbg_q_vector, ring, + &fm10k_dbg_desc_fops); + } +} + +/** + * fm10k_dbg_free_q_vector_dir - setup debugfs for the q_vectors + * @q_vector: q_vector to allocate directories for + **/ +void fm10k_dbg_q_vector_exit(struct fm10k_q_vector *q_vector) +{ + struct fm10k_intfc *interface = q_vector->interface; + + if (interface->dbg_intfc) + debugfs_remove_recursive(q_vector->dbg_q_vector); + q_vector->dbg_q_vector = NULL; +} + +/** + * fm10k_dbg_intfc_init - setup the debugfs directory for the intferface + * @interface: the interface that is starting up + **/ + +void fm10k_dbg_intfc_init(struct fm10k_intfc *interface) +{ + const char *name = pci_name(interface->pdev); + + if (dbg_root) + interface->dbg_intfc = debugfs_create_dir(name, dbg_root); +} + +/** + * fm10k_dbg_intfc_exit - clean out the interface's debugfs entries + * @interface: the interface that is stopping + **/ +void fm10k_dbg_intfc_exit(struct fm10k_intfc *interface) +{ + if (dbg_root) + debugfs_remove_recursive(interface->dbg_intfc); + interface->dbg_intfc = NULL; +} + +/** + * fm10k_dbg_init - start up debugfs for the driver + **/ +void fm10k_dbg_init(void) +{ + dbg_root = debugfs_create_dir(fm10k_driver_name, NULL); +} + +/** + * fm10k_dbg_exit - clean out the driver's debugfs entries + **/ +void fm10k_dbg_exit(void) +{ + debugfs_remove_recursive(dbg_root); + dbg_root = NULL; +} + +#endif /* CONFIG_DEBUG_FS */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c b/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c new file mode 100644 index 00000000000..2d04464e6aa --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_ethtool.c @@ -0,0 +1,1071 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include <linux/vmalloc.h> + +#include "fm10k.h" + +struct fm10k_stats { + char stat_string[ETH_GSTRING_LEN]; + int sizeof_stat; + int stat_offset; +}; + +#define FM10K_NETDEV_STAT(_net_stat) { \ + .stat_string = #_net_stat, \ + .sizeof_stat = FIELD_SIZEOF(struct net_device_stats, _net_stat), \ + .stat_offset = offsetof(struct net_device_stats, _net_stat) \ +} + +static const struct fm10k_stats fm10k_gstrings_net_stats[] = { + FM10K_NETDEV_STAT(tx_packets), + FM10K_NETDEV_STAT(tx_bytes), + FM10K_NETDEV_STAT(tx_errors), + FM10K_NETDEV_STAT(rx_packets), + FM10K_NETDEV_STAT(rx_bytes), + FM10K_NETDEV_STAT(rx_errors), + FM10K_NETDEV_STAT(rx_dropped), + + /* detailed Rx errors */ + FM10K_NETDEV_STAT(rx_length_errors), + FM10K_NETDEV_STAT(rx_crc_errors), + FM10K_NETDEV_STAT(rx_fifo_errors), +}; + +#define FM10K_NETDEV_STATS_LEN ARRAY_SIZE(fm10k_gstrings_net_stats) + +#define FM10K_STAT(_name, _stat) { \ + .stat_string = _name, \ + .sizeof_stat = FIELD_SIZEOF(struct fm10k_intfc, _stat), \ + .stat_offset = offsetof(struct fm10k_intfc, _stat) \ +} + +static const struct fm10k_stats fm10k_gstrings_stats[] = { + FM10K_STAT("tx_restart_queue", restart_queue), + FM10K_STAT("tx_busy", tx_busy), + FM10K_STAT("tx_csum_errors", tx_csum_errors), + FM10K_STAT("rx_alloc_failed", alloc_failed), + FM10K_STAT("rx_csum_errors", rx_csum_errors), + FM10K_STAT("rx_errors", rx_errors), + + FM10K_STAT("tx_packets_nic", tx_packets_nic), + FM10K_STAT("tx_bytes_nic", tx_bytes_nic), + FM10K_STAT("rx_packets_nic", rx_packets_nic), + FM10K_STAT("rx_bytes_nic", rx_bytes_nic), + FM10K_STAT("rx_drops_nic", rx_drops_nic), + FM10K_STAT("rx_overrun_pf", rx_overrun_pf), + FM10K_STAT("rx_overrun_vf", rx_overrun_vf), + + FM10K_STAT("timeout", stats.timeout.count), + FM10K_STAT("ur", stats.ur.count), + FM10K_STAT("ca", stats.ca.count), + FM10K_STAT("um", stats.um.count), + FM10K_STAT("xec", stats.xec.count), + FM10K_STAT("vlan_drop", stats.vlan_drop.count), + FM10K_STAT("loopback_drop", stats.loopback_drop.count), + FM10K_STAT("nodesc_drop", stats.nodesc_drop.count), + + FM10K_STAT("swapi_status", hw.swapi.status), + FM10K_STAT("mac_rules_used", hw.swapi.mac.used), + FM10K_STAT("mac_rules_avail", hw.swapi.mac.avail), + + FM10K_STAT("mbx_tx_busy", hw.mbx.tx_busy), + FM10K_STAT("mbx_tx_dropped", hw.mbx.tx_dropped), + FM10K_STAT("mbx_tx_messages", hw.mbx.tx_messages), + FM10K_STAT("mbx_tx_dwords", hw.mbx.tx_dwords), + FM10K_STAT("mbx_rx_messages", hw.mbx.rx_messages), + FM10K_STAT("mbx_rx_dwords", hw.mbx.rx_dwords), + FM10K_STAT("mbx_rx_parse_err", hw.mbx.rx_parse_err), + + FM10K_STAT("tx_hwtstamp_timeouts", tx_hwtstamp_timeouts), +}; + +#define FM10K_GLOBAL_STATS_LEN ARRAY_SIZE(fm10k_gstrings_stats) + +#define FM10K_QUEUE_STATS_LEN \ + (MAX_QUEUES * 2 * (sizeof(struct fm10k_queue_stats) / sizeof(u64))) + +#define FM10K_STATS_LEN (FM10K_GLOBAL_STATS_LEN + \ + FM10K_NETDEV_STATS_LEN + \ + FM10K_QUEUE_STATS_LEN) + +static const char fm10k_gstrings_test[][ETH_GSTRING_LEN] = { + "Mailbox test (on/offline)" +}; + +#define FM10K_TEST_LEN (sizeof(fm10k_gstrings_test) / ETH_GSTRING_LEN) + +enum fm10k_self_test_types { + FM10K_TEST_MBX, + FM10K_TEST_MAX = FM10K_TEST_LEN +}; + +static void fm10k_get_strings(struct net_device *dev, u32 stringset, + u8 *data) +{ + char *p = (char *)data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *fm10k_gstrings_test, + FM10K_TEST_LEN * ETH_GSTRING_LEN); + break; + case ETH_SS_STATS: + for (i = 0; i < FM10K_NETDEV_STATS_LEN; i++) { + memcpy(p, fm10k_gstrings_net_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < FM10K_GLOBAL_STATS_LEN; i++) { + memcpy(p, fm10k_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + + for (i = 0; i < MAX_QUEUES; i++) { + sprintf(p, "tx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } + break; + } +} + +static int fm10k_get_sset_count(struct net_device *dev, int sset) +{ + switch (sset) { + case ETH_SS_TEST: + return FM10K_TEST_LEN; + case ETH_SS_STATS: + return FM10K_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +static void fm10k_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + const int stat_count = sizeof(struct fm10k_queue_stats) / sizeof(u64); + struct fm10k_intfc *interface = netdev_priv(netdev); + struct net_device_stats *net_stats = &netdev->stats; + char *p; + int i, j; + + fm10k_update_stats(interface); + + for (i = 0; i < FM10K_NETDEV_STATS_LEN; i++) { + p = (char *)net_stats + fm10k_gstrings_net_stats[i].stat_offset; + *(data++) = (fm10k_gstrings_net_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + + for (i = 0; i < FM10K_GLOBAL_STATS_LEN; i++) { + p = (char *)interface + fm10k_gstrings_stats[i].stat_offset; + *(data++) = (fm10k_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + + for (i = 0; i < MAX_QUEUES; i++) { + struct fm10k_ring *ring; + u64 *queue_stat; + + ring = interface->tx_ring[i]; + if (ring) + queue_stat = (u64 *)&ring->stats; + for (j = 0; j < stat_count; j++) + *(data++) = ring ? queue_stat[j] : 0; + + ring = interface->rx_ring[i]; + if (ring) + queue_stat = (u64 *)&ring->stats; + for (j = 0; j < stat_count; j++) + *(data++) = ring ? queue_stat[j] : 0; + } +} + +/* If function below adds more registers this define needs to be updated */ +#define FM10K_REGS_LEN_Q 29 + +static void fm10k_get_reg_q(struct fm10k_hw *hw, u32 *buff, int i) +{ + int idx = 0; + + buff[idx++] = fm10k_read_reg(hw, FM10K_RDBAL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_RDBAH(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_RDLEN(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TPH_RXCTRL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_RDH(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_RDT(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_RXQCTL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_RXDCTL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_RXINT(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_SRRCTL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_QPRC(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_QPRDC(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_QBRC_L(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_QBRC_H(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TDBAL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TDBAH(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TDLEN(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TPH_TXCTRL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TDH(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TDT(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TXDCTL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TXQCTL(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TXINT(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_QPTC(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_QBTC_L(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_QBTC_H(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TQDLOC(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_TX_SGLORT(i)); + buff[idx++] = fm10k_read_reg(hw, FM10K_PFVTCTL(i)); + + BUG_ON(idx != FM10K_REGS_LEN_Q); +} + +/* If function above adds more registers this define needs to be updated */ +#define FM10K_REGS_LEN_VSI 43 + +static void fm10k_get_reg_vsi(struct fm10k_hw *hw, u32 *buff, int i) +{ + int idx = 0, j; + + buff[idx++] = fm10k_read_reg(hw, FM10K_MRQC(i)); + for (j = 0; j < 10; j++) + buff[idx++] = fm10k_read_reg(hw, FM10K_RSSRK(i, j)); + for (j = 0; j < 32; j++) + buff[idx++] = fm10k_read_reg(hw, FM10K_RETA(i, j)); + + BUG_ON(idx != FM10K_REGS_LEN_VSI); +} + +static void fm10k_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_hw *hw = &interface->hw; + u32 *buff = p; + u16 i; + + regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id; + + switch (hw->mac.type) { + case fm10k_mac_pf: + /* General PF Registers */ + *(buff++) = fm10k_read_reg(hw, FM10K_CTRL); + *(buff++) = fm10k_read_reg(hw, FM10K_CTRL_EXT); + *(buff++) = fm10k_read_reg(hw, FM10K_GCR); + *(buff++) = fm10k_read_reg(hw, FM10K_GCR_EXT); + + for (i = 0; i < 8; i++) { + *(buff++) = fm10k_read_reg(hw, FM10K_DGLORTMAP(i)); + *(buff++) = fm10k_read_reg(hw, FM10K_DGLORTDEC(i)); + } + + for (i = 0; i < 65; i++) { + fm10k_get_reg_vsi(hw, buff, i); + buff += FM10K_REGS_LEN_VSI; + } + + *(buff++) = fm10k_read_reg(hw, FM10K_DMA_CTRL); + *(buff++) = fm10k_read_reg(hw, FM10K_DMA_CTRL2); + + for (i = 0; i < FM10K_MAX_QUEUES_PF; i++) { + fm10k_get_reg_q(hw, buff, i); + buff += FM10K_REGS_LEN_Q; + } + + *(buff++) = fm10k_read_reg(hw, FM10K_TPH_CTRL); + + for (i = 0; i < 8; i++) + *(buff++) = fm10k_read_reg(hw, FM10K_INT_MAP(i)); + + /* Interrupt Throttling Registers */ + for (i = 0; i < 130; i++) + *(buff++) = fm10k_read_reg(hw, FM10K_ITR(i)); + + break; + case fm10k_mac_vf: + /* General VF registers */ + *(buff++) = fm10k_read_reg(hw, FM10K_VFCTRL); + *(buff++) = fm10k_read_reg(hw, FM10K_VFINT_MAP); + *(buff++) = fm10k_read_reg(hw, FM10K_VFSYSTIME); + + /* Interrupt Throttling Registers */ + for (i = 0; i < 8; i++) + *(buff++) = fm10k_read_reg(hw, FM10K_VFITR(i)); + + fm10k_get_reg_vsi(hw, buff, 0); + buff += FM10K_REGS_LEN_VSI; + + for (i = 0; i < FM10K_MAX_QUEUES_POOL; i++) { + if (i < hw->mac.max_queues) + fm10k_get_reg_q(hw, buff, i); + else + memset(buff, 0, sizeof(u32) * FM10K_REGS_LEN_Q); + buff += FM10K_REGS_LEN_Q; + } + + break; + default: + return; + } +} + +/* If function above adds more registers these define need to be updated */ +#define FM10K_REGS_LEN_PF \ +(162 + (65 * FM10K_REGS_LEN_VSI) + (FM10K_MAX_QUEUES_PF * FM10K_REGS_LEN_Q)) +#define FM10K_REGS_LEN_VF \ +(11 + FM10K_REGS_LEN_VSI + (FM10K_MAX_QUEUES_POOL * FM10K_REGS_LEN_Q)) + +static int fm10k_get_regs_len(struct net_device *netdev) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_hw *hw = &interface->hw; + + switch (hw->mac.type) { + case fm10k_mac_pf: + return FM10K_REGS_LEN_PF * sizeof(u32); + case fm10k_mac_vf: + return FM10K_REGS_LEN_VF * sizeof(u32); + default: + return 0; + } +} + +static void fm10k_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + strncpy(info->driver, fm10k_driver_name, + sizeof(info->driver) - 1); + strncpy(info->version, fm10k_driver_version, + sizeof(info->version) - 1); + strncpy(info->bus_info, pci_name(interface->pdev), + sizeof(info->bus_info) - 1); + + info->n_stats = FM10K_STATS_LEN; + + info->regdump_len = fm10k_get_regs_len(dev); +} + +static void fm10k_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + /* record fixed values for autoneg and tx pause */ + pause->autoneg = 0; + pause->tx_pause = 1; + + pause->rx_pause = interface->rx_pause ? 1 : 0; +} + +static int fm10k_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + + if (pause->autoneg || !pause->tx_pause) + return -EINVAL; + + /* we can only support pause on the PF to avoid head-of-line blocking */ + if (hw->mac.type == fm10k_mac_pf) + interface->rx_pause = pause->rx_pause ? ~0 : 0; + else if (pause->rx_pause) + return -EINVAL; + + if (netif_running(dev)) + fm10k_update_rx_drop_en(interface); + + return 0; +} + +static u32 fm10k_get_msglevel(struct net_device *netdev) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + + return interface->msg_enable; +} + +static void fm10k_set_msglevel(struct net_device *netdev, u32 data) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + + interface->msg_enable = data; +} + +static void fm10k_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + + ring->rx_max_pending = FM10K_MAX_RXD; + ring->tx_max_pending = FM10K_MAX_TXD; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->rx_pending = interface->rx_ring_count; + ring->tx_pending = interface->tx_ring_count; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; +} + +static int fm10k_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_ring *temp_ring; + int i, err = 0; + u32 new_rx_count, new_tx_count; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + new_tx_count = clamp_t(u32, ring->tx_pending, + FM10K_MIN_TXD, FM10K_MAX_TXD); + new_tx_count = ALIGN(new_tx_count, FM10K_REQ_TX_DESCRIPTOR_MULTIPLE); + + new_rx_count = clamp_t(u32, ring->rx_pending, + FM10K_MIN_RXD, FM10K_MAX_RXD); + new_rx_count = ALIGN(new_rx_count, FM10K_REQ_RX_DESCRIPTOR_MULTIPLE); + + if ((new_tx_count == interface->tx_ring_count) && + (new_rx_count == interface->rx_ring_count)) { + /* nothing to do */ + return 0; + } + + while (test_and_set_bit(__FM10K_RESETTING, &interface->state)) + usleep_range(1000, 2000); + + if (!netif_running(interface->netdev)) { + for (i = 0; i < interface->num_tx_queues; i++) + interface->tx_ring[i]->count = new_tx_count; + for (i = 0; i < interface->num_rx_queues; i++) + interface->rx_ring[i]->count = new_rx_count; + interface->tx_ring_count = new_tx_count; + interface->rx_ring_count = new_rx_count; + goto clear_reset; + } + + /* allocate temporary buffer to store rings in */ + i = max_t(int, interface->num_tx_queues, interface->num_rx_queues); + temp_ring = vmalloc(i * sizeof(struct fm10k_ring)); + + if (!temp_ring) { + err = -ENOMEM; + goto clear_reset; + } + + fm10k_down(interface); + + /* Setup new Tx resources and free the old Tx resources in that order. + * We can then assign the new resources to the rings via a memcpy. + * The advantage to this approach is that we are guaranteed to still + * have resources even in the case of an allocation failure. + */ + if (new_tx_count != interface->tx_ring_count) { + for (i = 0; i < interface->num_tx_queues; i++) { + memcpy(&temp_ring[i], interface->tx_ring[i], + sizeof(struct fm10k_ring)); + + temp_ring[i].count = new_tx_count; + err = fm10k_setup_tx_resources(&temp_ring[i]); + if (err) { + while (i) { + i--; + fm10k_free_tx_resources(&temp_ring[i]); + } + goto err_setup; + } + } + + for (i = 0; i < interface->num_tx_queues; i++) { + fm10k_free_tx_resources(interface->tx_ring[i]); + + memcpy(interface->tx_ring[i], &temp_ring[i], + sizeof(struct fm10k_ring)); + } + + interface->tx_ring_count = new_tx_count; + } + + /* Repeat the process for the Rx rings if needed */ + if (new_rx_count != interface->rx_ring_count) { + for (i = 0; i < interface->num_rx_queues; i++) { + memcpy(&temp_ring[i], interface->rx_ring[i], + sizeof(struct fm10k_ring)); + + temp_ring[i].count = new_rx_count; + err = fm10k_setup_rx_resources(&temp_ring[i]); + if (err) { + while (i) { + i--; + fm10k_free_rx_resources(&temp_ring[i]); + } + goto err_setup; + } + } + + for (i = 0; i < interface->num_rx_queues; i++) { + fm10k_free_rx_resources(interface->rx_ring[i]); + + memcpy(interface->rx_ring[i], &temp_ring[i], + sizeof(struct fm10k_ring)); + } + + interface->rx_ring_count = new_rx_count; + } + +err_setup: + fm10k_up(interface); + vfree(temp_ring); +clear_reset: + clear_bit(__FM10K_RESETTING, &interface->state); + return err; +} + +static int fm10k_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ec) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + ec->use_adaptive_tx_coalesce = + !!(interface->tx_itr & FM10K_ITR_ADAPTIVE); + ec->tx_coalesce_usecs = interface->tx_itr & ~FM10K_ITR_ADAPTIVE; + + ec->use_adaptive_rx_coalesce = + !!(interface->rx_itr & FM10K_ITR_ADAPTIVE); + ec->rx_coalesce_usecs = interface->rx_itr & ~FM10K_ITR_ADAPTIVE; + + return 0; +} + +static int fm10k_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ec) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_q_vector *qv; + u16 tx_itr, rx_itr; + int i; + + /* verify limits */ + if ((ec->rx_coalesce_usecs > FM10K_ITR_MAX) || + (ec->tx_coalesce_usecs > FM10K_ITR_MAX)) + return -EINVAL; + + /* record settings */ + tx_itr = ec->tx_coalesce_usecs; + rx_itr = ec->rx_coalesce_usecs; + + /* set initial values for adaptive ITR */ + if (ec->use_adaptive_tx_coalesce) + tx_itr = FM10K_ITR_ADAPTIVE | FM10K_ITR_10K; + + if (ec->use_adaptive_rx_coalesce) + rx_itr = FM10K_ITR_ADAPTIVE | FM10K_ITR_20K; + + /* update interface */ + interface->tx_itr = tx_itr; + interface->rx_itr = rx_itr; + + /* update q_vectors */ + for (i = 0; i < interface->num_q_vectors; i++) { + qv = interface->q_vector[i]; + qv->tx.itr = tx_itr; + qv->rx.itr = rx_itr; + } + + return 0; +} + +static int fm10k_get_rss_hash_opts(struct fm10k_intfc *interface, + struct ethtool_rxnfc *cmd) +{ + cmd->data = 0; + + /* Report default options for RSS on fm10k */ + switch (cmd->flow_type) { + case TCP_V4_FLOW: + case TCP_V6_FLOW: + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + /* fall through */ + case UDP_V4_FLOW: + if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV4_UDP) + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + /* fall through */ + case SCTP_V4_FLOW: + case SCTP_V6_FLOW: + case AH_ESP_V4_FLOW: + case AH_ESP_V6_FLOW: + case AH_V4_FLOW: + case AH_V6_FLOW: + case ESP_V4_FLOW: + case ESP_V6_FLOW: + case IPV4_FLOW: + case IPV6_FLOW: + cmd->data |= RXH_IP_SRC | RXH_IP_DST; + break; + case UDP_V6_FLOW: + if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV6_UDP) + cmd->data |= RXH_L4_B_0_1 | RXH_L4_B_2_3; + cmd->data |= RXH_IP_SRC | RXH_IP_DST; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int fm10k_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, + u32 *rule_locs) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_GRXRINGS: + cmd->data = interface->num_rx_queues; + ret = 0; + break; + case ETHTOOL_GRXFH: + ret = fm10k_get_rss_hash_opts(interface, cmd); + break; + default: + break; + } + + return ret; +} + +#define UDP_RSS_FLAGS (FM10K_FLAG_RSS_FIELD_IPV4_UDP | \ + FM10K_FLAG_RSS_FIELD_IPV6_UDP) +static int fm10k_set_rss_hash_opt(struct fm10k_intfc *interface, + struct ethtool_rxnfc *nfc) +{ + u32 flags = interface->flags; + + /* RSS does not support anything other than hashing + * to queues on src and dst IPs and ports + */ + if (nfc->data & ~(RXH_IP_SRC | RXH_IP_DST | + RXH_L4_B_0_1 | RXH_L4_B_2_3)) + return -EINVAL; + + switch (nfc->flow_type) { + case TCP_V4_FLOW: + case TCP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST) || + !(nfc->data & RXH_L4_B_0_1) || + !(nfc->data & RXH_L4_B_2_3)) + return -EINVAL; + break; + case UDP_V4_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST)) + return -EINVAL; + switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + case 0: + flags &= ~FM10K_FLAG_RSS_FIELD_IPV4_UDP; + break; + case (RXH_L4_B_0_1 | RXH_L4_B_2_3): + flags |= FM10K_FLAG_RSS_FIELD_IPV4_UDP; + break; + default: + return -EINVAL; + } + break; + case UDP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST)) + return -EINVAL; + switch (nfc->data & (RXH_L4_B_0_1 | RXH_L4_B_2_3)) { + case 0: + flags &= ~FM10K_FLAG_RSS_FIELD_IPV6_UDP; + break; + case (RXH_L4_B_0_1 | RXH_L4_B_2_3): + flags |= FM10K_FLAG_RSS_FIELD_IPV6_UDP; + break; + default: + return -EINVAL; + } + break; + case AH_ESP_V4_FLOW: + case AH_V4_FLOW: + case ESP_V4_FLOW: + case SCTP_V4_FLOW: + case AH_ESP_V6_FLOW: + case AH_V6_FLOW: + case ESP_V6_FLOW: + case SCTP_V6_FLOW: + if (!(nfc->data & RXH_IP_SRC) || + !(nfc->data & RXH_IP_DST) || + (nfc->data & RXH_L4_B_0_1) || + (nfc->data & RXH_L4_B_2_3)) + return -EINVAL; + break; + default: + return -EINVAL; + } + + /* if we changed something we need to update flags */ + if (flags != interface->flags) { + struct fm10k_hw *hw = &interface->hw; + u32 mrqc; + + if ((flags & UDP_RSS_FLAGS) && + !(interface->flags & UDP_RSS_FLAGS)) + netif_warn(interface, drv, interface->netdev, + "enabling UDP RSS: fragmented packets may arrive out of order to the stack above\n"); + + interface->flags = flags; + + /* Perform hash on these packet types */ + mrqc = FM10K_MRQC_IPV4 | + FM10K_MRQC_TCP_IPV4 | + FM10K_MRQC_IPV6 | + FM10K_MRQC_TCP_IPV6; + + if (flags & FM10K_FLAG_RSS_FIELD_IPV4_UDP) + mrqc |= FM10K_MRQC_UDP_IPV4; + if (flags & FM10K_FLAG_RSS_FIELD_IPV6_UDP) + mrqc |= FM10K_MRQC_UDP_IPV6; + + fm10k_write_reg(hw, FM10K_MRQC(0), mrqc); + } + + return 0; +} + +static int fm10k_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_SRXFH: + ret = fm10k_set_rss_hash_opt(interface, cmd); + break; + default: + break; + } + + return ret; +} + +static int fm10k_mbx_test(struct fm10k_intfc *interface, u64 *data) +{ + struct fm10k_hw *hw = &interface->hw; + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 attr_flag, test_msg[6]; + unsigned long timeout; + int err; + + /* For now this is a VF only feature */ + if (hw->mac.type != fm10k_mac_vf) + return 0; + + /* loop through both nested and unnested attribute types */ + for (attr_flag = (1 << FM10K_TEST_MSG_UNSET); + attr_flag < (1 << (2 * FM10K_TEST_MSG_NESTED)); + attr_flag += attr_flag) { + /* generate message to be tested */ + fm10k_tlv_msg_test_create(test_msg, attr_flag); + + fm10k_mbx_lock(interface); + mbx->test_result = FM10K_NOT_IMPLEMENTED; + err = mbx->ops.enqueue_tx(hw, mbx, test_msg); + fm10k_mbx_unlock(interface); + + /* wait up to 1 second for response */ + timeout = jiffies + HZ; + do { + if (err < 0) + goto err_out; + + usleep_range(500, 1000); + + fm10k_mbx_lock(interface); + mbx->ops.process(hw, mbx); + fm10k_mbx_unlock(interface); + + err = mbx->test_result; + if (!err) + break; + } while (time_is_after_jiffies(timeout)); + + /* reporting errors */ + if (err) + goto err_out; + } + +err_out: + *data = err < 0 ? (attr_flag) : (err > 0); + return err; +} + +static void fm10k_self_test(struct net_device *dev, + struct ethtool_test *eth_test, u64 *data) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + + memset(data, 0, sizeof(*data) * FM10K_TEST_LEN); + + if (FM10K_REMOVED(hw)) { + netif_err(interface, drv, dev, + "Interface removed - test blocked\n"); + eth_test->flags |= ETH_TEST_FL_FAILED; + return; + } + + if (fm10k_mbx_test(interface, &data[FM10K_TEST_MBX])) + eth_test->flags |= ETH_TEST_FL_FAILED; +} + +static u32 fm10k_get_reta_size(struct net_device *netdev) +{ + return FM10K_RETA_SIZE * FM10K_RETA_ENTRIES_PER_REG; +} + +static int fm10k_get_reta(struct net_device *netdev, u32 *indir) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + int i; + + if (!indir) + return 0; + + for (i = 0; i < FM10K_RETA_SIZE; i++, indir += 4) { + u32 reta = interface->reta[i]; + + indir[0] = (reta << 24) >> 24; + indir[1] = (reta << 16) >> 24; + indir[2] = (reta << 8) >> 24; + indir[3] = (reta) >> 24; + } + + return 0; +} + +static int fm10k_set_reta(struct net_device *netdev, const u32 *indir) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_hw *hw = &interface->hw; + int i; + u16 rss_i; + + if (!indir) + return 0; + + /* Verify user input. */ + rss_i = interface->ring_feature[RING_F_RSS].indices; + for (i = fm10k_get_reta_size(netdev); i--;) { + if (indir[i] < rss_i) + continue; + return -EINVAL; + } + + /* record entries to reta table */ + for (i = 0; i < FM10K_RETA_SIZE; i++, indir += 4) { + u32 reta = indir[0] | + (indir[1] << 8) | + (indir[2] << 16) | + (indir[3] << 24); + + if (interface->reta[i] == reta) + continue; + + interface->reta[i] = reta; + fm10k_write_reg(hw, FM10K_RETA(0, i), reta); + } + + return 0; +} + +static u32 fm10k_get_rssrk_size(struct net_device *netdev) +{ + return FM10K_RSSRK_SIZE * FM10K_RSSRK_ENTRIES_PER_REG; +} + +static int fm10k_get_rssh(struct net_device *netdev, u32 *indir, u8 *key) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + int i, err; + + err = fm10k_get_reta(netdev, indir); + if (err || !key) + return err; + + for (i = 0; i < FM10K_RSSRK_SIZE; i++, key += 4) + *(__le32 *)key = cpu_to_le32(interface->rssrk[i]); + + return 0; +} + +static int fm10k_set_rssh(struct net_device *netdev, const u32 *indir, + const u8 *key) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_hw *hw = &interface->hw; + int i, err; + + err = fm10k_set_reta(netdev, indir); + if (err || !key) + return err; + + for (i = 0; i < FM10K_RSSRK_SIZE; i++, key += 4) { + u32 rssrk = le32_to_cpu(*(__le32 *)key); + + if (interface->rssrk[i] == rssrk) + continue; + + interface->rssrk[i] = rssrk; + fm10k_write_reg(hw, FM10K_RSSRK(0, i), rssrk); + } + + return 0; +} + +static unsigned int fm10k_max_channels(struct net_device *dev) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + unsigned int max_combined = interface->hw.mac.max_queues; + u8 tcs = netdev_get_num_tc(dev); + + /* For QoS report channels per traffic class */ + if (tcs > 1) + max_combined = 1 << (fls(max_combined / tcs) - 1); + + return max_combined; +} + +static void fm10k_get_channels(struct net_device *dev, + struct ethtool_channels *ch) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + + /* report maximum channels */ + ch->max_combined = fm10k_max_channels(dev); + + /* report info for other vector */ + ch->max_other = NON_Q_VECTORS(hw); + ch->other_count = ch->max_other; + + /* record RSS queues */ + ch->combined_count = interface->ring_feature[RING_F_RSS].indices; +} + +static int fm10k_set_channels(struct net_device *dev, + struct ethtool_channels *ch) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + unsigned int count = ch->combined_count; + struct fm10k_hw *hw = &interface->hw; + + /* verify they are not requesting separate vectors */ + if (!count || ch->rx_count || ch->tx_count) + return -EINVAL; + + /* verify other_count has not changed */ + if (ch->other_count != NON_Q_VECTORS(hw)) + return -EINVAL; + + /* verify the number of channels does not exceed hardware limits */ + if (count > fm10k_max_channels(dev)) + return -EINVAL; + + interface->ring_feature[RING_F_RSS].limit = count; + + /* use setup TC to update any traffic class queue mapping */ + return fm10k_setup_tc(dev, netdev_get_num_tc(dev)); +} + +static int fm10k_get_ts_info(struct net_device *dev, + struct ethtool_ts_info *info) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + info->so_timestamping = + SOF_TIMESTAMPING_TX_SOFTWARE | + SOF_TIMESTAMPING_RX_SOFTWARE | + SOF_TIMESTAMPING_SOFTWARE | + SOF_TIMESTAMPING_TX_HARDWARE | + SOF_TIMESTAMPING_RX_HARDWARE | + SOF_TIMESTAMPING_RAW_HARDWARE; + + if (interface->ptp_clock) + info->phc_index = ptp_clock_index(interface->ptp_clock); + else + info->phc_index = -1; + + info->tx_types = (1 << HWTSTAMP_TX_OFF) | + (1 << HWTSTAMP_TX_ON); + + info->rx_filters = (1 << HWTSTAMP_FILTER_NONE) | + (1 << HWTSTAMP_FILTER_ALL); + + return 0; +} + +static const struct ethtool_ops fm10k_ethtool_ops = { + .get_strings = fm10k_get_strings, + .get_sset_count = fm10k_get_sset_count, + .get_ethtool_stats = fm10k_get_ethtool_stats, + .get_drvinfo = fm10k_get_drvinfo, + .get_link = ethtool_op_get_link, + .get_pauseparam = fm10k_get_pauseparam, + .set_pauseparam = fm10k_set_pauseparam, + .get_msglevel = fm10k_get_msglevel, + .set_msglevel = fm10k_set_msglevel, + .get_ringparam = fm10k_get_ringparam, + .set_ringparam = fm10k_set_ringparam, + .get_coalesce = fm10k_get_coalesce, + .set_coalesce = fm10k_set_coalesce, + .get_rxnfc = fm10k_get_rxnfc, + .set_rxnfc = fm10k_set_rxnfc, + .get_regs = fm10k_get_regs, + .get_regs_len = fm10k_get_regs_len, + .self_test = fm10k_self_test, + .get_rxfh_indir_size = fm10k_get_reta_size, + .get_rxfh_key_size = fm10k_get_rssrk_size, + .get_rxfh = fm10k_get_rssh, + .set_rxfh = fm10k_set_rssh, + .get_channels = fm10k_get_channels, + .set_channels = fm10k_set_channels, + .get_ts_info = fm10k_get_ts_info, +}; + +void fm10k_set_ethtool_ops(struct net_device *dev) +{ + dev->ethtool_ops = &fm10k_ethtool_ops; +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_iov.c b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c new file mode 100644 index 00000000000..06019086423 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_iov.c @@ -0,0 +1,536 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k.h" +#include "fm10k_vf.h" +#include "fm10k_pf.h" + +static s32 fm10k_iov_msg_error(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; + struct fm10k_intfc *interface = hw->back; + struct pci_dev *pdev = interface->pdev; + + dev_err(&pdev->dev, "Unknown message ID %u on VF %d\n", + **results & FM10K_TLV_ID_MASK, vf_info->vf_idx); + + return fm10k_tlv_msg_error(hw, results, mbx); +} + +static const struct fm10k_msg_data iov_mbx_data[] = { + FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test), + FM10K_VF_MSG_MSIX_HANDLER(fm10k_iov_msg_msix_pf), + FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_iov_msg_mac_vlan_pf), + FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_iov_msg_lport_state_pf), + FM10K_TLV_MSG_ERROR_HANDLER(fm10k_iov_msg_error), +}; + +s32 fm10k_iov_event(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + struct fm10k_iov_data *iov_data; + s64 mbicr, vflre; + int i; + + /* if there is no iov_data then there is no mailboxes to process */ + if (!ACCESS_ONCE(interface->iov_data)) + return 0; + + rcu_read_lock(); + + iov_data = interface->iov_data; + + /* check again now that we are in the RCU block */ + if (!iov_data) + goto read_unlock; + + if (!(fm10k_read_reg(hw, FM10K_EICR) & FM10K_EICR_VFLR)) + goto process_mbx; + + /* read VFLRE to determine if any VFs have been reset */ + do { + vflre = fm10k_read_reg(hw, FM10K_PFVFLRE(0)); + vflre <<= 32; + vflre |= fm10k_read_reg(hw, FM10K_PFVFLRE(1)); + vflre = (vflre << 32) | (vflre >> 32); + vflre |= fm10k_read_reg(hw, FM10K_PFVFLRE(0)); + + i = iov_data->num_vfs; + + for (vflre <<= 64 - i; vflre && i--; vflre += vflre) { + struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; + + if (vflre >= 0) + continue; + + hw->iov.ops.reset_resources(hw, vf_info); + vf_info->mbx.ops.connect(hw, &vf_info->mbx); + } + } while (i != iov_data->num_vfs); + +process_mbx: + /* read MBICR to determine which VFs require attention */ + mbicr = fm10k_read_reg(hw, FM10K_MBICR(1)); + mbicr <<= 32; + mbicr |= fm10k_read_reg(hw, FM10K_MBICR(0)); + + i = iov_data->next_vf_mbx ? : iov_data->num_vfs; + + for (mbicr <<= 64 - i; i--; mbicr += mbicr) { + struct fm10k_mbx_info *mbx = &iov_data->vf_info[i].mbx; + + if (mbicr >= 0) + continue; + + if (!hw->mbx.ops.tx_ready(&hw->mbx, FM10K_VFMBX_MSG_MTU)) + break; + + mbx->ops.process(hw, mbx); + } + + if (i >= 0) { + iov_data->next_vf_mbx = i + 1; + } else if (iov_data->next_vf_mbx) { + iov_data->next_vf_mbx = 0; + goto process_mbx; + } +read_unlock: + rcu_read_unlock(); + + return 0; +} + +s32 fm10k_iov_mbx(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + struct fm10k_iov_data *iov_data; + int i; + + /* if there is no iov_data then there is no mailboxes to process */ + if (!ACCESS_ONCE(interface->iov_data)) + return 0; + + rcu_read_lock(); + + iov_data = interface->iov_data; + + /* check again now that we are in the RCU block */ + if (!iov_data) + goto read_unlock; + + /* lock the mailbox for transmit and receive */ + fm10k_mbx_lock(interface); + +process_mbx: + for (i = iov_data->next_vf_mbx ? : iov_data->num_vfs; i--;) { + struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; + struct fm10k_mbx_info *mbx = &vf_info->mbx; + u16 glort = vf_info->glort; + + /* verify port mapping is valid, if not reset port */ + if (vf_info->vf_flags && !fm10k_glort_valid_pf(hw, glort)) + hw->iov.ops.reset_lport(hw, vf_info); + + /* reset VFs that have mailbox timed out */ + if (!mbx->timeout) { + hw->iov.ops.reset_resources(hw, vf_info); + mbx->ops.connect(hw, mbx); + } + + /* no work pending, then just continue */ + if (mbx->ops.tx_complete(mbx) && !mbx->ops.rx_ready(mbx)) + continue; + + /* guarantee we have free space in the SM mailbox */ + if (!hw->mbx.ops.tx_ready(&hw->mbx, FM10K_VFMBX_MSG_MTU)) + break; + + /* cleanup mailbox and process received messages */ + mbx->ops.process(hw, mbx); + } + + if (i >= 0) { + iov_data->next_vf_mbx = i + 1; + } else if (iov_data->next_vf_mbx) { + iov_data->next_vf_mbx = 0; + goto process_mbx; + } + + /* free the lock */ + fm10k_mbx_unlock(interface); + +read_unlock: + rcu_read_unlock(); + + return 0; +} + +void fm10k_iov_suspend(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct fm10k_iov_data *iov_data = interface->iov_data; + struct fm10k_hw *hw = &interface->hw; + int num_vfs, i; + + /* pull out num_vfs from iov_data */ + num_vfs = iov_data ? iov_data->num_vfs : 0; + + /* shut down queue mapping for VFs */ + fm10k_write_reg(hw, FM10K_DGLORTMAP(fm10k_dglort_vf_rss), + FM10K_DGLORTMAP_NONE); + + /* Stop any active VFs and reset their resources */ + for (i = 0; i < num_vfs; i++) { + struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; + + hw->iov.ops.reset_resources(hw, vf_info); + hw->iov.ops.reset_lport(hw, vf_info); + } +} + +int fm10k_iov_resume(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct fm10k_iov_data *iov_data = interface->iov_data; + struct fm10k_dglort_cfg dglort = { 0 }; + struct fm10k_hw *hw = &interface->hw; + int num_vfs, i; + + /* pull out num_vfs from iov_data */ + num_vfs = iov_data ? iov_data->num_vfs : 0; + + /* return error if iov_data is not already populated */ + if (!iov_data) + return -ENOMEM; + + /* allocate hardware resources for the VFs */ + hw->iov.ops.assign_resources(hw, num_vfs, num_vfs); + + /* configure DGLORT mapping for RSS */ + dglort.glort = hw->mac.dglort_map & FM10K_DGLORTMAP_NONE; + dglort.idx = fm10k_dglort_vf_rss; + dglort.inner_rss = 1; + dglort.rss_l = fls(fm10k_queues_per_pool(hw) - 1); + dglort.queue_b = fm10k_vf_queue_index(hw, 0); + dglort.vsi_l = fls(hw->iov.total_vfs - 1); + dglort.vsi_b = 1; + + hw->mac.ops.configure_dglort_map(hw, &dglort); + + /* assign resources to the device */ + for (i = 0; i < num_vfs; i++) { + struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; + + /* allocate all but the last GLORT to the VFs */ + if (i == ((~hw->mac.dglort_map) >> FM10K_DGLORTMAP_MASK_SHIFT)) + break; + + /* assign GLORT to VF, and restrict it to multicast */ + hw->iov.ops.set_lport(hw, vf_info, i, + FM10K_VF_FLAG_MULTI_CAPABLE); + + /* assign our default vid to the VF following reset */ + vf_info->sw_vid = hw->mac.default_vid; + + /* mailbox is disconnected so we don't send a message */ + hw->iov.ops.assign_default_mac_vlan(hw, vf_info); + + /* now we are ready so we can connect */ + vf_info->mbx.ops.connect(hw, &vf_info->mbx); + } + + return 0; +} + +s32 fm10k_iov_update_pvid(struct fm10k_intfc *interface, u16 glort, u16 pvid) +{ + struct fm10k_iov_data *iov_data = interface->iov_data; + struct fm10k_hw *hw = &interface->hw; + struct fm10k_vf_info *vf_info; + u16 vf_idx = (glort - hw->mac.dglort_map) & FM10K_DGLORTMAP_NONE; + + /* no IOV support, not our message to process */ + if (!iov_data) + return FM10K_ERR_PARAM; + + /* glort outside our range, not our message to process */ + if (vf_idx >= iov_data->num_vfs) + return FM10K_ERR_PARAM; + + /* determine if an update has occured and if so notify the VF */ + vf_info = &iov_data->vf_info[vf_idx]; + if (vf_info->sw_vid != pvid) { + vf_info->sw_vid = pvid; + hw->iov.ops.assign_default_mac_vlan(hw, vf_info); + } + + return 0; +} + +static void fm10k_iov_free_data(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + + if (!interface->iov_data) + return; + + /* reclaim hardware resources */ + fm10k_iov_suspend(pdev); + + /* drop iov_data from interface */ + kfree_rcu(interface->iov_data, rcu); + interface->iov_data = NULL; +} + +static s32 fm10k_iov_alloc_data(struct pci_dev *pdev, int num_vfs) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct fm10k_iov_data *iov_data = interface->iov_data; + struct fm10k_hw *hw = &interface->hw; + size_t size; + int i, err; + + /* return error if iov_data is already populated */ + if (iov_data) + return -EBUSY; + + /* The PF should always be able to assign resources */ + if (!hw->iov.ops.assign_resources) + return -ENODEV; + + /* nothing to do if no VFs are requested */ + if (!num_vfs) + return 0; + + /* allocate memory for VF storage */ + size = offsetof(struct fm10k_iov_data, vf_info[num_vfs]); + iov_data = kzalloc(size, GFP_KERNEL); + if (!iov_data) + return -ENOMEM; + + /* record number of VFs */ + iov_data->num_vfs = num_vfs; + + /* loop through vf_info structures initializing each entry */ + for (i = 0; i < num_vfs; i++) { + struct fm10k_vf_info *vf_info = &iov_data->vf_info[i]; + + /* Record VF VSI value */ + vf_info->vsi = i + 1; + vf_info->vf_idx = i; + + /* initialize mailbox memory */ + err = fm10k_pfvf_mbx_init(hw, &vf_info->mbx, iov_mbx_data, i); + if (err) { + dev_err(&pdev->dev, + "Unable to initialize SR-IOV mailbox\n"); + kfree(iov_data); + return err; + } + } + + /* assign iov_data to interface */ + interface->iov_data = iov_data; + + /* allocate hardware resources for the VFs */ + fm10k_iov_resume(pdev); + + return 0; +} + +void fm10k_iov_disable(struct pci_dev *pdev) +{ + if (pci_num_vf(pdev) && pci_vfs_assigned(pdev)) + dev_err(&pdev->dev, + "Cannot disable SR-IOV while VFs are assigned\n"); + else + pci_disable_sriov(pdev); + + fm10k_iov_free_data(pdev); +} + +static void fm10k_disable_aer_comp_abort(struct pci_dev *pdev) +{ + u32 err_sev; + int pos; + + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); + if (!pos) + return; + + pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, &err_sev); + err_sev &= ~PCI_ERR_UNC_COMP_ABORT; + pci_write_config_dword(pdev, pos + PCI_ERR_UNCOR_SEVER, err_sev); +} + +int fm10k_iov_configure(struct pci_dev *pdev, int num_vfs) +{ + int current_vfs = pci_num_vf(pdev); + int err = 0; + + if (current_vfs && pci_vfs_assigned(pdev)) { + dev_err(&pdev->dev, + "Cannot modify SR-IOV while VFs are assigned\n"); + num_vfs = current_vfs; + } else { + pci_disable_sriov(pdev); + fm10k_iov_free_data(pdev); + } + + /* allocate resources for the VFs */ + err = fm10k_iov_alloc_data(pdev, num_vfs); + if (err) + return err; + + /* allocate VFs if not already allocated */ + if (num_vfs && (num_vfs != current_vfs)) { + /* Disable completer abort error reporting as + * the VFs can trigger this any time they read a queue + * that they don't own. + */ + fm10k_disable_aer_comp_abort(pdev); + + err = pci_enable_sriov(pdev, num_vfs); + if (err) { + dev_err(&pdev->dev, + "Enable PCI SR-IOV failed: %d\n", err); + return err; + } + } + + return num_vfs; +} + +int fm10k_ndo_set_vf_mac(struct net_device *netdev, int vf_idx, u8 *mac) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_iov_data *iov_data = interface->iov_data; + struct fm10k_hw *hw = &interface->hw; + struct fm10k_vf_info *vf_info; + + /* verify SR-IOV is active and that vf idx is valid */ + if (!iov_data || vf_idx >= iov_data->num_vfs) + return -EINVAL; + + /* verify MAC addr is valid */ + if (!is_zero_ether_addr(mac) && !is_valid_ether_addr(mac)) + return -EINVAL; + + /* record new MAC address */ + vf_info = &iov_data->vf_info[vf_idx]; + ether_addr_copy(vf_info->mac, mac); + + /* assigning the MAC will send a mailbox message so lock is needed */ + fm10k_mbx_lock(interface); + + /* assign MAC address to VF */ + hw->iov.ops.assign_default_mac_vlan(hw, vf_info); + + fm10k_mbx_unlock(interface); + + return 0; +} + +int fm10k_ndo_set_vf_vlan(struct net_device *netdev, int vf_idx, u16 vid, + u8 qos) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_iov_data *iov_data = interface->iov_data; + struct fm10k_hw *hw = &interface->hw; + struct fm10k_vf_info *vf_info; + + /* verify SR-IOV is active and that vf idx is valid */ + if (!iov_data || vf_idx >= iov_data->num_vfs) + return -EINVAL; + + /* QOS is unsupported and VLAN IDs accepted range 0-4094 */ + if (qos || (vid > (VLAN_VID_MASK - 1))) + return -EINVAL; + + vf_info = &iov_data->vf_info[vf_idx]; + + /* exit if there is nothing to do */ + if (vf_info->pf_vid == vid) + return 0; + + /* record default VLAN ID for VF */ + vf_info->pf_vid = vid; + + /* assigning the VLAN will send a mailbox message so lock is needed */ + fm10k_mbx_lock(interface); + + /* Clear the VLAN table for the VF */ + hw->mac.ops.update_vlan(hw, FM10K_VLAN_ALL, vf_info->vsi, false); + + /* Update VF assignment and trigger reset */ + hw->iov.ops.assign_default_mac_vlan(hw, vf_info); + + fm10k_mbx_unlock(interface); + + return 0; +} + +int fm10k_ndo_set_vf_bw(struct net_device *netdev, int vf_idx, int unused, + int rate) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_iov_data *iov_data = interface->iov_data; + struct fm10k_hw *hw = &interface->hw; + + /* verify SR-IOV is active and that vf idx is valid */ + if (!iov_data || vf_idx >= iov_data->num_vfs) + return -EINVAL; + + /* rate limit cannot be less than 10Mbs or greater than link speed */ + if (rate && ((rate < FM10K_VF_TC_MIN) || rate > FM10K_VF_TC_MAX)) + return -EINVAL; + + /* store values */ + iov_data->vf_info[vf_idx].rate = rate; + + /* update hardware configuration */ + hw->iov.ops.configure_tc(hw, vf_idx, rate); + + return 0; +} + +int fm10k_ndo_get_vf_config(struct net_device *netdev, + int vf_idx, struct ifla_vf_info *ivi) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_iov_data *iov_data = interface->iov_data; + struct fm10k_vf_info *vf_info; + + /* verify SR-IOV is active and that vf idx is valid */ + if (!iov_data || vf_idx >= iov_data->num_vfs) + return -EINVAL; + + vf_info = &iov_data->vf_info[vf_idx]; + + ivi->vf = vf_idx; + ivi->max_tx_rate = vf_info->rate; + ivi->min_tx_rate = 0; + ether_addr_copy(ivi->mac, vf_info->mac); + ivi->vlan = vf_info->pf_vid; + ivi->qos = 0; + + return 0; +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c new file mode 100644 index 00000000000..9d7118a0d67 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c @@ -0,0 +1,1978 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <net/ipv6.h> +#include <net/ip.h> +#include <net/tcp.h> +#include <linux/if_macvlan.h> +#include <linux/prefetch.h> + +#include "fm10k.h" + +#define DRV_VERSION "0.12.2-k" +const char fm10k_driver_version[] = DRV_VERSION; +char fm10k_driver_name[] = "fm10k"; +static const char fm10k_driver_string[] = + "Intel(R) Ethernet Switch Host Interface Driver"; +static const char fm10k_copyright[] = + "Copyright (c) 2013 Intel Corporation."; + +MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); +MODULE_DESCRIPTION("Intel(R) Ethernet Switch Host Interface Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +/** + * fm10k_init_module - Driver Registration Routine + * + * fm10k_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ +static int __init fm10k_init_module(void) +{ + pr_info("%s - version %s\n", fm10k_driver_string, fm10k_driver_version); + pr_info("%s\n", fm10k_copyright); + + fm10k_dbg_init(); + + return fm10k_register_pci_driver(); +} +module_init(fm10k_init_module); + +/** + * fm10k_exit_module - Driver Exit Cleanup Routine + * + * fm10k_exit_module is called just before the driver is removed + * from memory. + **/ +static void __exit fm10k_exit_module(void) +{ + fm10k_unregister_pci_driver(); + + fm10k_dbg_exit(); +} +module_exit(fm10k_exit_module); + +static bool fm10k_alloc_mapped_page(struct fm10k_ring *rx_ring, + struct fm10k_rx_buffer *bi) +{ + struct page *page = bi->page; + dma_addr_t dma; + + /* Only page will be NULL if buffer was consumed */ + if (likely(page)) + return true; + + /* alloc new page for storage */ + page = alloc_page(GFP_ATOMIC | __GFP_COLD); + if (unlikely(!page)) { + rx_ring->rx_stats.alloc_failed++; + return false; + } + + /* map page for use */ + dma = dma_map_page(rx_ring->dev, page, 0, PAGE_SIZE, DMA_FROM_DEVICE); + + /* if mapping failed free memory back to system since + * there isn't much point in holding memory we can't use + */ + if (dma_mapping_error(rx_ring->dev, dma)) { + __free_page(page); + bi->page = NULL; + + rx_ring->rx_stats.alloc_failed++; + return false; + } + + bi->dma = dma; + bi->page = page; + bi->page_offset = 0; + + return true; +} + +/** + * fm10k_alloc_rx_buffers - Replace used receive buffers + * @rx_ring: ring to place buffers on + * @cleaned_count: number of buffers to replace + **/ +void fm10k_alloc_rx_buffers(struct fm10k_ring *rx_ring, u16 cleaned_count) +{ + union fm10k_rx_desc *rx_desc; + struct fm10k_rx_buffer *bi; + u16 i = rx_ring->next_to_use; + + /* nothing to do */ + if (!cleaned_count) + return; + + rx_desc = FM10K_RX_DESC(rx_ring, i); + bi = &rx_ring->rx_buffer[i]; + i -= rx_ring->count; + + do { + if (!fm10k_alloc_mapped_page(rx_ring, bi)) + break; + + /* Refresh the desc even if buffer_addrs didn't change + * because each write-back erases this info. + */ + rx_desc->q.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); + + rx_desc++; + bi++; + i++; + if (unlikely(!i)) { + rx_desc = FM10K_RX_DESC(rx_ring, 0); + bi = rx_ring->rx_buffer; + i -= rx_ring->count; + } + + /* clear the hdr_addr for the next_to_use descriptor */ + rx_desc->q.hdr_addr = 0; + + cleaned_count--; + } while (cleaned_count); + + i += rx_ring->count; + + if (rx_ring->next_to_use != i) { + /* record the next descriptor to use */ + rx_ring->next_to_use = i; + + /* update next to alloc since we have filled the ring */ + rx_ring->next_to_alloc = i; + + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + + /* notify hardware of new descriptors */ + writel(i, rx_ring->tail); + } +} + +/** + * fm10k_reuse_rx_page - page flip buffer and store it back on the ring + * @rx_ring: rx descriptor ring to store buffers on + * @old_buff: donor buffer to have page reused + * + * Synchronizes page for reuse by the interface + **/ +static void fm10k_reuse_rx_page(struct fm10k_ring *rx_ring, + struct fm10k_rx_buffer *old_buff) +{ + struct fm10k_rx_buffer *new_buff; + u16 nta = rx_ring->next_to_alloc; + + new_buff = &rx_ring->rx_buffer[nta]; + + /* update, and store next to alloc */ + nta++; + rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; + + /* transfer page from old buffer to new buffer */ + memcpy(new_buff, old_buff, sizeof(struct fm10k_rx_buffer)); + + /* sync the buffer for use by the device */ + dma_sync_single_range_for_device(rx_ring->dev, old_buff->dma, + old_buff->page_offset, + FM10K_RX_BUFSZ, + DMA_FROM_DEVICE); +} + +static bool fm10k_can_reuse_rx_page(struct fm10k_rx_buffer *rx_buffer, + struct page *page, + unsigned int truesize) +{ + /* avoid re-using remote pages */ + if (unlikely(page_to_nid(page) != numa_mem_id())) + return false; + +#if (PAGE_SIZE < 8192) + /* if we are only owner of page we can reuse it */ + if (unlikely(page_count(page) != 1)) + return false; + + /* flip page offset to other buffer */ + rx_buffer->page_offset ^= FM10K_RX_BUFSZ; + + /* Even if we own the page, we are not allowed to use atomic_set() + * This would break get_page_unless_zero() users. + */ + atomic_inc(&page->_count); +#else + /* move offset up to the next cache line */ + rx_buffer->page_offset += truesize; + + if (rx_buffer->page_offset > (PAGE_SIZE - FM10K_RX_BUFSZ)) + return false; + + /* bump ref count on page before it is given to the stack */ + get_page(page); +#endif + + return true; +} + +/** + * fm10k_add_rx_frag - Add contents of Rx buffer to sk_buff + * @rx_ring: rx descriptor ring to transact packets on + * @rx_buffer: buffer containing page to add + * @rx_desc: descriptor containing length of buffer written by hardware + * @skb: sk_buff to place the data into + * + * This function will add the data contained in rx_buffer->page to the skb. + * This is done either through a direct copy if the data in the buffer is + * less than the skb header size, otherwise it will just attach the page as + * a frag to the skb. + * + * The function will then update the page offset if necessary and return + * true if the buffer can be reused by the interface. + **/ +static bool fm10k_add_rx_frag(struct fm10k_ring *rx_ring, + struct fm10k_rx_buffer *rx_buffer, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct page *page = rx_buffer->page; + unsigned int size = le16_to_cpu(rx_desc->w.length); +#if (PAGE_SIZE < 8192) + unsigned int truesize = FM10K_RX_BUFSZ; +#else + unsigned int truesize = ALIGN(size, L1_CACHE_BYTES); +#endif + + if ((size <= FM10K_RX_HDR_LEN) && !skb_is_nonlinear(skb)) { + unsigned char *va = page_address(page) + rx_buffer->page_offset; + + memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long))); + + /* we can reuse buffer as-is, just make sure it is local */ + if (likely(page_to_nid(page) == numa_mem_id())) + return true; + + /* this page cannot be reused so discard it */ + put_page(page); + return false; + } + + skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, + rx_buffer->page_offset, size, truesize); + + return fm10k_can_reuse_rx_page(rx_buffer, page, truesize); +} + +static struct sk_buff *fm10k_fetch_rx_buffer(struct fm10k_ring *rx_ring, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct fm10k_rx_buffer *rx_buffer; + struct page *page; + + rx_buffer = &rx_ring->rx_buffer[rx_ring->next_to_clean]; + + page = rx_buffer->page; + prefetchw(page); + + if (likely(!skb)) { + void *page_addr = page_address(page) + + rx_buffer->page_offset; + + /* prefetch first cache line of first page */ + prefetch(page_addr); +#if L1_CACHE_BYTES < 128 + prefetch(page_addr + L1_CACHE_BYTES); +#endif + + /* allocate a skb to store the frags */ + skb = netdev_alloc_skb_ip_align(rx_ring->netdev, + FM10K_RX_HDR_LEN); + if (unlikely(!skb)) { + rx_ring->rx_stats.alloc_failed++; + return NULL; + } + + /* we will be copying header into skb->data in + * pskb_may_pull so it is in our interest to prefetch + * it now to avoid a possible cache miss + */ + prefetchw(skb->data); + } + + /* we are reusing so sync this buffer for CPU use */ + dma_sync_single_range_for_cpu(rx_ring->dev, + rx_buffer->dma, + rx_buffer->page_offset, + FM10K_RX_BUFSZ, + DMA_FROM_DEVICE); + + /* pull page into skb */ + if (fm10k_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) { + /* hand second half of page back to the ring */ + fm10k_reuse_rx_page(rx_ring, rx_buffer); + } else { + /* we are not reusing the buffer so unmap it */ + dma_unmap_page(rx_ring->dev, rx_buffer->dma, + PAGE_SIZE, DMA_FROM_DEVICE); + } + + /* clear contents of rx_buffer */ + rx_buffer->page = NULL; + + return skb; +} + +static inline void fm10k_rx_checksum(struct fm10k_ring *ring, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + skb_checksum_none_assert(skb); + + /* Rx checksum disabled via ethtool */ + if (!(ring->netdev->features & NETIF_F_RXCSUM)) + return; + + /* TCP/UDP checksum error bit is set */ + if (fm10k_test_staterr(rx_desc, + FM10K_RXD_STATUS_L4E | + FM10K_RXD_STATUS_L4E2 | + FM10K_RXD_STATUS_IPE | + FM10K_RXD_STATUS_IPE2)) { + ring->rx_stats.csum_err++; + return; + } + + /* It must be a TCP or UDP packet with a valid checksum */ + if (fm10k_test_staterr(rx_desc, FM10K_RXD_STATUS_L4CS2)) + skb->encapsulation = true; + else if (!fm10k_test_staterr(rx_desc, FM10K_RXD_STATUS_L4CS)) + return; + + skb->ip_summed = CHECKSUM_UNNECESSARY; +} + +#define FM10K_RSS_L4_TYPES_MASK \ + ((1ul << FM10K_RSSTYPE_IPV4_TCP) | \ + (1ul << FM10K_RSSTYPE_IPV4_UDP) | \ + (1ul << FM10K_RSSTYPE_IPV6_TCP) | \ + (1ul << FM10K_RSSTYPE_IPV6_UDP)) + +static inline void fm10k_rx_hash(struct fm10k_ring *ring, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + u16 rss_type; + + if (!(ring->netdev->features & NETIF_F_RXHASH)) + return; + + rss_type = le16_to_cpu(rx_desc->w.pkt_info) & FM10K_RXD_RSSTYPE_MASK; + if (!rss_type) + return; + + skb_set_hash(skb, le32_to_cpu(rx_desc->d.rss), + (FM10K_RSS_L4_TYPES_MASK & (1ul << rss_type)) ? + PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3); +} + +static void fm10k_rx_hwtstamp(struct fm10k_ring *rx_ring, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct fm10k_intfc *interface = rx_ring->q_vector->interface; + + FM10K_CB(skb)->tstamp = rx_desc->q.timestamp; + + if (unlikely(interface->flags & FM10K_FLAG_RX_TS_ENABLED)) + fm10k_systime_to_hwtstamp(interface, skb_hwtstamps(skb), + le64_to_cpu(rx_desc->q.timestamp)); +} + +static void fm10k_type_trans(struct fm10k_ring *rx_ring, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct net_device *dev = rx_ring->netdev; + struct fm10k_l2_accel *l2_accel = rcu_dereference_bh(rx_ring->l2_accel); + + /* check to see if DGLORT belongs to a MACVLAN */ + if (l2_accel) { + u16 idx = le16_to_cpu(FM10K_CB(skb)->fi.w.dglort) - 1; + + idx -= l2_accel->dglort; + if (idx < l2_accel->size && l2_accel->macvlan[idx]) + dev = l2_accel->macvlan[idx]; + else + l2_accel = NULL; + } + + skb->protocol = eth_type_trans(skb, dev); + + if (!l2_accel) + return; + + /* update MACVLAN statistics */ + macvlan_count_rx(netdev_priv(dev), skb->len + ETH_HLEN, 1, + !!(rx_desc->w.hdr_info & + cpu_to_le16(FM10K_RXD_HDR_INFO_XC_MASK))); +} + +/** + * fm10k_process_skb_fields - Populate skb header fields from Rx descriptor + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being populated + * + * This function checks the ring, descriptor, and packet information in + * order to populate the hash, checksum, VLAN, timestamp, protocol, and + * other fields within the skb. + **/ +static unsigned int fm10k_process_skb_fields(struct fm10k_ring *rx_ring, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + unsigned int len = skb->len; + + fm10k_rx_hash(rx_ring, rx_desc, skb); + + fm10k_rx_checksum(rx_ring, rx_desc, skb); + + fm10k_rx_hwtstamp(rx_ring, rx_desc, skb); + + FM10K_CB(skb)->fi.w.vlan = rx_desc->w.vlan; + + skb_record_rx_queue(skb, rx_ring->queue_index); + + FM10K_CB(skb)->fi.d.glort = rx_desc->d.glort; + + if (rx_desc->w.vlan) { + u16 vid = le16_to_cpu(rx_desc->w.vlan); + + if (vid != rx_ring->vid) + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); + } + + fm10k_type_trans(rx_ring, rx_desc, skb); + + return len; +} + +/** + * fm10k_is_non_eop - process handling of non-EOP buffers + * @rx_ring: Rx ring being processed + * @rx_desc: Rx descriptor for current buffer + * + * This function updates next to clean. If the buffer is an EOP buffer + * this function exits returning false, otherwise it will place the + * sk_buff in the next buffer to be chained and return true indicating + * that this is in fact a non-EOP buffer. + **/ +static bool fm10k_is_non_eop(struct fm10k_ring *rx_ring, + union fm10k_rx_desc *rx_desc) +{ + u32 ntc = rx_ring->next_to_clean + 1; + + /* fetch, update, and store next to clean */ + ntc = (ntc < rx_ring->count) ? ntc : 0; + rx_ring->next_to_clean = ntc; + + prefetch(FM10K_RX_DESC(rx_ring, ntc)); + + if (likely(fm10k_test_staterr(rx_desc, FM10K_RXD_STATUS_EOP))) + return false; + + return true; +} + +/** + * fm10k_pull_tail - fm10k specific version of skb_pull_tail + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being adjusted + * + * This function is an fm10k specific version of __pskb_pull_tail. The + * main difference between this version and the original function is that + * this function can make several assumptions about the state of things + * that allow for significant optimizations versus the standard function. + * As a result we can do things like drop a frag and maintain an accurate + * truesize for the skb. + */ +static void fm10k_pull_tail(struct fm10k_ring *rx_ring, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; + unsigned char *va; + unsigned int pull_len; + + /* it is valid to use page_address instead of kmap since we are + * working with pages allocated out of the lomem pool per + * alloc_page(GFP_ATOMIC) + */ + va = skb_frag_address(frag); + + /* we need the header to contain the greater of either ETH_HLEN or + * 60 bytes if the skb->len is less than 60 for skb_pad. + */ + pull_len = eth_get_headlen(va, FM10K_RX_HDR_LEN); + + /* align pull length to size of long to optimize memcpy performance */ + skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long))); + + /* update all of the pointers */ + skb_frag_size_sub(frag, pull_len); + frag->page_offset += pull_len; + skb->data_len -= pull_len; + skb->tail += pull_len; +} + +/** + * fm10k_cleanup_headers - Correct corrupted or empty headers + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being fixed + * + * Address the case where we are pulling data in on pages only + * and as such no data is present in the skb header. + * + * In addition if skb is not at least 60 bytes we need to pad it so that + * it is large enough to qualify as a valid Ethernet frame. + * + * Returns true if an error was encountered and skb was freed. + **/ +static bool fm10k_cleanup_headers(struct fm10k_ring *rx_ring, + union fm10k_rx_desc *rx_desc, + struct sk_buff *skb) +{ + if (unlikely((fm10k_test_staterr(rx_desc, + FM10K_RXD_STATUS_RXE)))) { + dev_kfree_skb_any(skb); + rx_ring->rx_stats.errors++; + return true; + } + + /* place header in linear portion of buffer */ + if (skb_is_nonlinear(skb)) + fm10k_pull_tail(rx_ring, rx_desc, skb); + + /* if skb_pad returns an error the skb was freed */ + if (unlikely(skb->len < 60)) { + int pad_len = 60 - skb->len; + + if (skb_pad(skb, pad_len)) + return true; + __skb_put(skb, pad_len); + } + + return false; +} + +/** + * fm10k_receive_skb - helper function to handle rx indications + * @q_vector: structure containing interrupt and ring information + * @skb: packet to send up + **/ +static void fm10k_receive_skb(struct fm10k_q_vector *q_vector, + struct sk_buff *skb) +{ + napi_gro_receive(&q_vector->napi, skb); +} + +static bool fm10k_clean_rx_irq(struct fm10k_q_vector *q_vector, + struct fm10k_ring *rx_ring, + int budget) +{ + struct sk_buff *skb = rx_ring->skb; + unsigned int total_bytes = 0, total_packets = 0; + u16 cleaned_count = fm10k_desc_unused(rx_ring); + + do { + union fm10k_rx_desc *rx_desc; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= FM10K_RX_BUFFER_WRITE) { + fm10k_alloc_rx_buffers(rx_ring, cleaned_count); + cleaned_count = 0; + } + + rx_desc = FM10K_RX_DESC(rx_ring, rx_ring->next_to_clean); + + if (!fm10k_test_staterr(rx_desc, FM10K_RXD_STATUS_DD)) + break; + + /* This memory barrier is needed to keep us from reading + * any other fields out of the rx_desc until we know the + * RXD_STATUS_DD bit is set + */ + rmb(); + + /* retrieve a buffer from the ring */ + skb = fm10k_fetch_rx_buffer(rx_ring, rx_desc, skb); + + /* exit if we failed to retrieve a buffer */ + if (!skb) + break; + + cleaned_count++; + + /* fetch next buffer in frame if non-eop */ + if (fm10k_is_non_eop(rx_ring, rx_desc)) + continue; + + /* verify the packet layout is correct */ + if (fm10k_cleanup_headers(rx_ring, rx_desc, skb)) { + skb = NULL; + continue; + } + + /* populate checksum, timestamp, VLAN, and protocol */ + total_bytes += fm10k_process_skb_fields(rx_ring, rx_desc, skb); + + fm10k_receive_skb(q_vector, skb); + + /* reset skb pointer */ + skb = NULL; + + /* update budget accounting */ + total_packets++; + } while (likely(total_packets < budget)); + + /* place incomplete frames back on ring for completion */ + rx_ring->skb = skb; + + u64_stats_update_begin(&rx_ring->syncp); + rx_ring->stats.packets += total_packets; + rx_ring->stats.bytes += total_bytes; + u64_stats_update_end(&rx_ring->syncp); + q_vector->rx.total_packets += total_packets; + q_vector->rx.total_bytes += total_bytes; + + return total_packets < budget; +} + +#define VXLAN_HLEN (sizeof(struct udphdr) + 8) +static struct ethhdr *fm10k_port_is_vxlan(struct sk_buff *skb) +{ + struct fm10k_intfc *interface = netdev_priv(skb->dev); + struct fm10k_vxlan_port *vxlan_port; + + /* we can only offload a vxlan if we recognize it as such */ + vxlan_port = list_first_entry_or_null(&interface->vxlan_port, + struct fm10k_vxlan_port, list); + + if (!vxlan_port) + return NULL; + if (vxlan_port->port != udp_hdr(skb)->dest) + return NULL; + + /* return offset of udp_hdr plus 8 bytes for VXLAN header */ + return (struct ethhdr *)(skb_transport_header(skb) + VXLAN_HLEN); +} + +#define FM10K_NVGRE_RESERVED0_FLAGS htons(0x9FFF) +#define NVGRE_TNI htons(0x2000) +struct fm10k_nvgre_hdr { + __be16 flags; + __be16 proto; + __be32 tni; +}; + +static struct ethhdr *fm10k_gre_is_nvgre(struct sk_buff *skb) +{ + struct fm10k_nvgre_hdr *nvgre_hdr; + int hlen = ip_hdrlen(skb); + + /* currently only IPv4 is supported due to hlen above */ + if (vlan_get_protocol(skb) != htons(ETH_P_IP)) + return NULL; + + /* our transport header should be NVGRE */ + nvgre_hdr = (struct fm10k_nvgre_hdr *)(skb_network_header(skb) + hlen); + + /* verify all reserved flags are 0 */ + if (nvgre_hdr->flags & FM10K_NVGRE_RESERVED0_FLAGS) + return NULL; + + /* verify protocol is transparent Ethernet bridging */ + if (nvgre_hdr->proto != htons(ETH_P_TEB)) + return NULL; + + /* report start of ethernet header */ + if (nvgre_hdr->flags & NVGRE_TNI) + return (struct ethhdr *)(nvgre_hdr + 1); + + return (struct ethhdr *)(&nvgre_hdr->tni); +} + +static __be16 fm10k_tx_encap_offload(struct sk_buff *skb) +{ + struct ethhdr *eth_hdr; + u8 l4_hdr = 0; + + switch (vlan_get_protocol(skb)) { + case htons(ETH_P_IP): + l4_hdr = ip_hdr(skb)->protocol; + break; + case htons(ETH_P_IPV6): + l4_hdr = ipv6_hdr(skb)->nexthdr; + break; + default: + return 0; + } + + switch (l4_hdr) { + case IPPROTO_UDP: + eth_hdr = fm10k_port_is_vxlan(skb); + break; + case IPPROTO_GRE: + eth_hdr = fm10k_gre_is_nvgre(skb); + break; + default: + return 0; + } + + if (!eth_hdr) + return 0; + + switch (eth_hdr->h_proto) { + case htons(ETH_P_IP): + case htons(ETH_P_IPV6): + break; + default: + return 0; + } + + return eth_hdr->h_proto; +} + +static int fm10k_tso(struct fm10k_ring *tx_ring, + struct fm10k_tx_buffer *first) +{ + struct sk_buff *skb = first->skb; + struct fm10k_tx_desc *tx_desc; + unsigned char *th; + u8 hdrlen; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + if (!skb_is_gso(skb)) + return 0; + + /* compute header lengths */ + if (skb->encapsulation) { + if (!fm10k_tx_encap_offload(skb)) + goto err_vxlan; + th = skb_inner_transport_header(skb); + } else { + th = skb_transport_header(skb); + } + + /* compute offset from SOF to transport header and add header len */ + hdrlen = (th - skb->data) + (((struct tcphdr *)th)->doff << 2); + + first->tx_flags |= FM10K_TX_FLAGS_CSUM; + + /* update gso size and bytecount with header size */ + first->gso_segs = skb_shinfo(skb)->gso_segs; + first->bytecount += (first->gso_segs - 1) * hdrlen; + + /* populate Tx descriptor header size and mss */ + tx_desc = FM10K_TX_DESC(tx_ring, tx_ring->next_to_use); + tx_desc->hdrlen = hdrlen; + tx_desc->mss = cpu_to_le16(skb_shinfo(skb)->gso_size); + + return 1; +err_vxlan: + tx_ring->netdev->features &= ~NETIF_F_GSO_UDP_TUNNEL; + if (!net_ratelimit()) + netdev_err(tx_ring->netdev, + "TSO requested for unsupported tunnel, disabling offload\n"); + return -1; +} + +static void fm10k_tx_csum(struct fm10k_ring *tx_ring, + struct fm10k_tx_buffer *first) +{ + struct sk_buff *skb = first->skb; + struct fm10k_tx_desc *tx_desc; + union { + struct iphdr *ipv4; + struct ipv6hdr *ipv6; + u8 *raw; + } network_hdr; + __be16 protocol; + u8 l4_hdr = 0; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + goto no_csum; + + if (skb->encapsulation) { + protocol = fm10k_tx_encap_offload(skb); + if (!protocol) { + if (skb_checksum_help(skb)) { + dev_warn(tx_ring->dev, + "failed to offload encap csum!\n"); + tx_ring->tx_stats.csum_err++; + } + goto no_csum; + } + network_hdr.raw = skb_inner_network_header(skb); + } else { + protocol = vlan_get_protocol(skb); + network_hdr.raw = skb_network_header(skb); + } + + switch (protocol) { + case htons(ETH_P_IP): + l4_hdr = network_hdr.ipv4->protocol; + break; + case htons(ETH_P_IPV6): + l4_hdr = network_hdr.ipv6->nexthdr; + break; + default: + if (unlikely(net_ratelimit())) { + dev_warn(tx_ring->dev, + "partial checksum but ip version=%x!\n", + protocol); + } + tx_ring->tx_stats.csum_err++; + goto no_csum; + } + + switch (l4_hdr) { + case IPPROTO_TCP: + case IPPROTO_UDP: + break; + case IPPROTO_GRE: + if (skb->encapsulation) + break; + default: + if (unlikely(net_ratelimit())) { + dev_warn(tx_ring->dev, + "partial checksum but l4 proto=%x!\n", + l4_hdr); + } + tx_ring->tx_stats.csum_err++; + goto no_csum; + } + + /* update TX checksum flag */ + first->tx_flags |= FM10K_TX_FLAGS_CSUM; + +no_csum: + /* populate Tx descriptor header size and mss */ + tx_desc = FM10K_TX_DESC(tx_ring, tx_ring->next_to_use); + tx_desc->hdrlen = 0; + tx_desc->mss = 0; +} + +#define FM10K_SET_FLAG(_input, _flag, _result) \ + ((_flag <= _result) ? \ + ((u32)(_input & _flag) * (_result / _flag)) : \ + ((u32)(_input & _flag) / (_flag / _result))) + +static u8 fm10k_tx_desc_flags(struct sk_buff *skb, u32 tx_flags) +{ + /* set type for advanced descriptor with frame checksum insertion */ + u32 desc_flags = 0; + + /* set timestamping bits */ + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + likely(skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS)) + desc_flags |= FM10K_TXD_FLAG_TIME; + + /* set checksum offload bits */ + desc_flags |= FM10K_SET_FLAG(tx_flags, FM10K_TX_FLAGS_CSUM, + FM10K_TXD_FLAG_CSUM); + + return desc_flags; +} + +static bool fm10k_tx_desc_push(struct fm10k_ring *tx_ring, + struct fm10k_tx_desc *tx_desc, u16 i, + dma_addr_t dma, unsigned int size, u8 desc_flags) +{ + /* set RS and INT for last frame in a cache line */ + if ((++i & (FM10K_TXD_WB_FIFO_SIZE - 1)) == 0) + desc_flags |= FM10K_TXD_FLAG_RS | FM10K_TXD_FLAG_INT; + + /* record values to descriptor */ + tx_desc->buffer_addr = cpu_to_le64(dma); + tx_desc->flags = desc_flags; + tx_desc->buflen = cpu_to_le16(size); + + /* return true if we just wrapped the ring */ + return i == tx_ring->count; +} + +static void fm10k_tx_map(struct fm10k_ring *tx_ring, + struct fm10k_tx_buffer *first) +{ + struct sk_buff *skb = first->skb; + struct fm10k_tx_buffer *tx_buffer; + struct fm10k_tx_desc *tx_desc; + struct skb_frag_struct *frag; + unsigned char *data; + dma_addr_t dma; + unsigned int data_len, size; + u32 tx_flags = first->tx_flags; + u16 i = tx_ring->next_to_use; + u8 flags = fm10k_tx_desc_flags(skb, tx_flags); + + tx_desc = FM10K_TX_DESC(tx_ring, i); + + /* add HW VLAN tag */ + if (vlan_tx_tag_present(skb)) + tx_desc->vlan = cpu_to_le16(vlan_tx_tag_get(skb)); + else + tx_desc->vlan = 0; + + size = skb_headlen(skb); + data = skb->data; + + dma = dma_map_single(tx_ring->dev, data, size, DMA_TO_DEVICE); + + data_len = skb->data_len; + tx_buffer = first; + + for (frag = &skb_shinfo(skb)->frags[0];; frag++) { + if (dma_mapping_error(tx_ring->dev, dma)) + goto dma_error; + + /* record length, and DMA address */ + dma_unmap_len_set(tx_buffer, len, size); + dma_unmap_addr_set(tx_buffer, dma, dma); + + while (unlikely(size > FM10K_MAX_DATA_PER_TXD)) { + if (fm10k_tx_desc_push(tx_ring, tx_desc++, i++, dma, + FM10K_MAX_DATA_PER_TXD, flags)) { + tx_desc = FM10K_TX_DESC(tx_ring, 0); + i = 0; + } + + dma += FM10K_MAX_DATA_PER_TXD; + size -= FM10K_MAX_DATA_PER_TXD; + } + + if (likely(!data_len)) + break; + + if (fm10k_tx_desc_push(tx_ring, tx_desc++, i++, + dma, size, flags)) { + tx_desc = FM10K_TX_DESC(tx_ring, 0); + i = 0; + } + + size = skb_frag_size(frag); + data_len -= size; + + dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, + DMA_TO_DEVICE); + + tx_buffer = &tx_ring->tx_buffer[i]; + } + + /* write last descriptor with LAST bit set */ + flags |= FM10K_TXD_FLAG_LAST; + + if (fm10k_tx_desc_push(tx_ring, tx_desc, i++, dma, size, flags)) + i = 0; + + /* record bytecount for BQL */ + netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); + + /* record SW timestamp if HW timestamp is not available */ + skb_tx_timestamp(first->skb); + + /* Force memory writes to complete before letting h/w know there + * are new descriptors to fetch. (Only applicable for weak-ordered + * memory model archs, such as IA-64). + * + * We also need this memory barrier to make certain all of the + * status bits have been updated before next_to_watch is written. + */ + wmb(); + + /* set next_to_watch value indicating a packet is present */ + first->next_to_watch = tx_desc; + + tx_ring->next_to_use = i; + + /* notify HW of packet */ + writel(i, tx_ring->tail); + + /* we need this if more than one processor can write to our tail + * at a time, it synchronizes IO on IA64/Altix systems + */ + mmiowb(); + + return; +dma_error: + dev_err(tx_ring->dev, "TX DMA map failed\n"); + + /* clear dma mappings for failed tx_buffer map */ + for (;;) { + tx_buffer = &tx_ring->tx_buffer[i]; + fm10k_unmap_and_free_tx_resource(tx_ring, tx_buffer); + if (tx_buffer == first) + break; + if (i == 0) + i = tx_ring->count; + i--; + } + + tx_ring->next_to_use = i; +} + +static int __fm10k_maybe_stop_tx(struct fm10k_ring *tx_ring, u16 size) +{ + netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); + + smp_mb(); + + /* We need to check again in a case another CPU has just + * made room available. */ + if (likely(fm10k_desc_unused(tx_ring) < size)) + return -EBUSY; + + /* A reprieve! - use start_queue because it doesn't call schedule */ + netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index); + ++tx_ring->tx_stats.restart_queue; + return 0; +} + +static inline int fm10k_maybe_stop_tx(struct fm10k_ring *tx_ring, u16 size) +{ + if (likely(fm10k_desc_unused(tx_ring) >= size)) + return 0; + return __fm10k_maybe_stop_tx(tx_ring, size); +} + +netdev_tx_t fm10k_xmit_frame_ring(struct sk_buff *skb, + struct fm10k_ring *tx_ring) +{ + struct fm10k_tx_buffer *first; + int tso; + u32 tx_flags = 0; +#if PAGE_SIZE > FM10K_MAX_DATA_PER_TXD + unsigned short f; +#endif + u16 count = TXD_USE_COUNT(skb_headlen(skb)); + + /* need: 1 descriptor per page * PAGE_SIZE/FM10K_MAX_DATA_PER_TXD, + * + 1 desc for skb_headlen/FM10K_MAX_DATA_PER_TXD, + * + 2 desc gap to keep tail from touching head + * otherwise try next time + */ +#if PAGE_SIZE > FM10K_MAX_DATA_PER_TXD + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) + count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); +#else + count += skb_shinfo(skb)->nr_frags; +#endif + if (fm10k_maybe_stop_tx(tx_ring, count + 3)) { + tx_ring->tx_stats.tx_busy++; + return NETDEV_TX_BUSY; + } + + /* record the location of the first descriptor for this packet */ + first = &tx_ring->tx_buffer[tx_ring->next_to_use]; + first->skb = skb; + first->bytecount = max_t(unsigned int, skb->len, ETH_ZLEN); + first->gso_segs = 1; + + /* record initial flags and protocol */ + first->tx_flags = tx_flags; + + tso = fm10k_tso(tx_ring, first); + if (tso < 0) + goto out_drop; + else if (!tso) + fm10k_tx_csum(tx_ring, first); + + fm10k_tx_map(tx_ring, first); + + fm10k_maybe_stop_tx(tx_ring, DESC_NEEDED); + + return NETDEV_TX_OK; + +out_drop: + dev_kfree_skb_any(first->skb); + first->skb = NULL; + + return NETDEV_TX_OK; +} + +static u64 fm10k_get_tx_completed(struct fm10k_ring *ring) +{ + return ring->stats.packets; +} + +static u64 fm10k_get_tx_pending(struct fm10k_ring *ring) +{ + /* use SW head and tail until we have real hardware */ + u32 head = ring->next_to_clean; + u32 tail = ring->next_to_use; + + return ((head <= tail) ? tail : tail + ring->count) - head; +} + +bool fm10k_check_tx_hang(struct fm10k_ring *tx_ring) +{ + u32 tx_done = fm10k_get_tx_completed(tx_ring); + u32 tx_done_old = tx_ring->tx_stats.tx_done_old; + u32 tx_pending = fm10k_get_tx_pending(tx_ring); + + clear_check_for_tx_hang(tx_ring); + + /* Check for a hung queue, but be thorough. This verifies + * that a transmit has been completed since the previous + * check AND there is at least one packet pending. By + * requiring this to fail twice we avoid races with + * clearing the ARMED bit and conditions where we + * run the check_tx_hang logic with a transmit completion + * pending but without time to complete it yet. + */ + if (!tx_pending || (tx_done_old != tx_done)) { + /* update completed stats and continue */ + tx_ring->tx_stats.tx_done_old = tx_done; + /* reset the countdown */ + clear_bit(__FM10K_HANG_CHECK_ARMED, &tx_ring->state); + + return false; + } + + /* make sure it is true for two checks in a row */ + return test_and_set_bit(__FM10K_HANG_CHECK_ARMED, &tx_ring->state); +} + +/** + * fm10k_tx_timeout_reset - initiate reset due to Tx timeout + * @interface: driver private struct + **/ +void fm10k_tx_timeout_reset(struct fm10k_intfc *interface) +{ + /* Do the reset outside of interrupt context */ + if (!test_bit(__FM10K_DOWN, &interface->state)) { + netdev_err(interface->netdev, "Reset interface\n"); + interface->tx_timeout_count++; + interface->flags |= FM10K_FLAG_RESET_REQUESTED; + fm10k_service_event_schedule(interface); + } +} + +/** + * fm10k_clean_tx_irq - Reclaim resources after transmit completes + * @q_vector: structure containing interrupt and ring information + * @tx_ring: tx ring to clean + **/ +static bool fm10k_clean_tx_irq(struct fm10k_q_vector *q_vector, + struct fm10k_ring *tx_ring) +{ + struct fm10k_intfc *interface = q_vector->interface; + struct fm10k_tx_buffer *tx_buffer; + struct fm10k_tx_desc *tx_desc; + unsigned int total_bytes = 0, total_packets = 0; + unsigned int budget = q_vector->tx.work_limit; + unsigned int i = tx_ring->next_to_clean; + + if (test_bit(__FM10K_DOWN, &interface->state)) + return true; + + tx_buffer = &tx_ring->tx_buffer[i]; + tx_desc = FM10K_TX_DESC(tx_ring, i); + i -= tx_ring->count; + + do { + struct fm10k_tx_desc *eop_desc = tx_buffer->next_to_watch; + + /* if next_to_watch is not set then there is no work pending */ + if (!eop_desc) + break; + + /* prevent any other reads prior to eop_desc */ + read_barrier_depends(); + + /* if DD is not set pending work has not been completed */ + if (!(eop_desc->flags & FM10K_TXD_FLAG_DONE)) + break; + + /* clear next_to_watch to prevent false hangs */ + tx_buffer->next_to_watch = NULL; + + /* update the statistics for this packet */ + total_bytes += tx_buffer->bytecount; + total_packets += tx_buffer->gso_segs; + + /* free the skb */ + dev_consume_skb_any(tx_buffer->skb); + + /* unmap skb header data */ + dma_unmap_single(tx_ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + + /* clear tx_buffer data */ + tx_buffer->skb = NULL; + dma_unmap_len_set(tx_buffer, len, 0); + + /* unmap remaining buffers */ + while (tx_desc != eop_desc) { + tx_buffer++; + tx_desc++; + i++; + if (unlikely(!i)) { + i -= tx_ring->count; + tx_buffer = tx_ring->tx_buffer; + tx_desc = FM10K_TX_DESC(tx_ring, 0); + } + + /* unmap any remaining paged data */ + if (dma_unmap_len(tx_buffer, len)) { + dma_unmap_page(tx_ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + dma_unmap_len_set(tx_buffer, len, 0); + } + } + + /* move us one more past the eop_desc for start of next pkt */ + tx_buffer++; + tx_desc++; + i++; + if (unlikely(!i)) { + i -= tx_ring->count; + tx_buffer = tx_ring->tx_buffer; + tx_desc = FM10K_TX_DESC(tx_ring, 0); + } + + /* issue prefetch for next Tx descriptor */ + prefetch(tx_desc); + + /* update budget accounting */ + budget--; + } while (likely(budget)); + + i += tx_ring->count; + tx_ring->next_to_clean = i; + u64_stats_update_begin(&tx_ring->syncp); + tx_ring->stats.bytes += total_bytes; + tx_ring->stats.packets += total_packets; + u64_stats_update_end(&tx_ring->syncp); + q_vector->tx.total_bytes += total_bytes; + q_vector->tx.total_packets += total_packets; + + if (check_for_tx_hang(tx_ring) && fm10k_check_tx_hang(tx_ring)) { + /* schedule immediate reset if we believe we hung */ + struct fm10k_hw *hw = &interface->hw; + + netif_err(interface, drv, tx_ring->netdev, + "Detected Tx Unit Hang\n" + " Tx Queue <%d>\n" + " TDH, TDT <%x>, <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n", + tx_ring->queue_index, + fm10k_read_reg(hw, FM10K_TDH(tx_ring->reg_idx)), + fm10k_read_reg(hw, FM10K_TDT(tx_ring->reg_idx)), + tx_ring->next_to_use, i); + + netif_stop_subqueue(tx_ring->netdev, + tx_ring->queue_index); + + netif_info(interface, probe, tx_ring->netdev, + "tx hang %d detected on queue %d, resetting interface\n", + interface->tx_timeout_count + 1, + tx_ring->queue_index); + + fm10k_tx_timeout_reset(interface); + + /* the netdev is about to reset, no point in enabling stuff */ + return true; + } + + /* notify netdev of completed buffers */ + netdev_tx_completed_queue(txring_txq(tx_ring), + total_packets, total_bytes); + +#define TX_WAKE_THRESHOLD min_t(u16, FM10K_MIN_TXD - 1, DESC_NEEDED * 2) + if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && + (fm10k_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (__netif_subqueue_stopped(tx_ring->netdev, + tx_ring->queue_index) && + !test_bit(__FM10K_DOWN, &interface->state)) { + netif_wake_subqueue(tx_ring->netdev, + tx_ring->queue_index); + ++tx_ring->tx_stats.restart_queue; + } + } + + return !!budget; +} + +/** + * fm10k_update_itr - update the dynamic ITR value based on packet size + * + * Stores a new ITR value based on strictly on packet size. The + * divisors and thresholds used by this function were determined based + * on theoretical maximum wire speed and testing data, in order to + * minimize response time while increasing bulk throughput. + * + * @ring_container: Container for rings to have ITR updated + **/ +static void fm10k_update_itr(struct fm10k_ring_container *ring_container) +{ + unsigned int avg_wire_size, packets; + + /* Only update ITR if we are using adaptive setting */ + if (!(ring_container->itr & FM10K_ITR_ADAPTIVE)) + goto clear_counts; + + packets = ring_container->total_packets; + if (!packets) + goto clear_counts; + + avg_wire_size = ring_container->total_bytes / packets; + + /* Add 24 bytes to size to account for CRC, preamble, and gap */ + avg_wire_size += 24; + + /* Don't starve jumbo frames */ + if (avg_wire_size > 3000) + avg_wire_size = 3000; + + /* Give a little boost to mid-size frames */ + if ((avg_wire_size > 300) && (avg_wire_size < 1200)) + avg_wire_size /= 3; + else + avg_wire_size /= 2; + + /* write back value and retain adaptive flag */ + ring_container->itr = avg_wire_size | FM10K_ITR_ADAPTIVE; + +clear_counts: + ring_container->total_bytes = 0; + ring_container->total_packets = 0; +} + +static void fm10k_qv_enable(struct fm10k_q_vector *q_vector) +{ + /* Enable auto-mask and clear the current mask */ + u32 itr = FM10K_ITR_ENABLE; + + /* Update Tx ITR */ + fm10k_update_itr(&q_vector->tx); + + /* Update Rx ITR */ + fm10k_update_itr(&q_vector->rx); + + /* Store Tx itr in timer slot 0 */ + itr |= (q_vector->tx.itr & FM10K_ITR_MAX); + + /* Shift Rx itr to timer slot 1 */ + itr |= (q_vector->rx.itr & FM10K_ITR_MAX) << FM10K_ITR_INTERVAL1_SHIFT; + + /* Write the final value to the ITR register */ + writel(itr, q_vector->itr); +} + +static int fm10k_poll(struct napi_struct *napi, int budget) +{ + struct fm10k_q_vector *q_vector = + container_of(napi, struct fm10k_q_vector, napi); + struct fm10k_ring *ring; + int per_ring_budget; + bool clean_complete = true; + + fm10k_for_each_ring(ring, q_vector->tx) + clean_complete &= fm10k_clean_tx_irq(q_vector, ring); + + /* attempt to distribute budget to each queue fairly, but don't + * allow the budget to go below 1 because we'll exit polling + */ + if (q_vector->rx.count > 1) + per_ring_budget = max(budget/q_vector->rx.count, 1); + else + per_ring_budget = budget; + + fm10k_for_each_ring(ring, q_vector->rx) + clean_complete &= fm10k_clean_rx_irq(q_vector, ring, + per_ring_budget); + + /* If all work not completed, return budget and keep polling */ + if (!clean_complete) + return budget; + + /* all work done, exit the polling mode */ + napi_complete(napi); + + /* re-enable the q_vector */ + fm10k_qv_enable(q_vector); + + return 0; +} + +/** + * fm10k_set_qos_queues: Allocate queues for a QOS-enabled device + * @interface: board private structure to initialize + * + * When QoS (Quality of Service) is enabled, allocate queues for + * each traffic class. If multiqueue isn't available,then abort QoS + * initialization. + * + * This function handles all combinations of Qos and RSS. + * + **/ +static bool fm10k_set_qos_queues(struct fm10k_intfc *interface) +{ + struct net_device *dev = interface->netdev; + struct fm10k_ring_feature *f; + int rss_i, i; + int pcs; + + /* Map queue offset and counts onto allocated tx queues */ + pcs = netdev_get_num_tc(dev); + + if (pcs <= 1) + return false; + + /* set QoS mask and indices */ + f = &interface->ring_feature[RING_F_QOS]; + f->indices = pcs; + f->mask = (1 << fls(pcs - 1)) - 1; + + /* determine the upper limit for our current DCB mode */ + rss_i = interface->hw.mac.max_queues / pcs; + rss_i = 1 << (fls(rss_i) - 1); + + /* set RSS mask and indices */ + f = &interface->ring_feature[RING_F_RSS]; + rss_i = min_t(u16, rss_i, f->limit); + f->indices = rss_i; + f->mask = (1 << fls(rss_i - 1)) - 1; + + /* configure pause class to queue mapping */ + for (i = 0; i < pcs; i++) + netdev_set_tc_queue(dev, i, rss_i, rss_i * i); + + interface->num_rx_queues = rss_i * pcs; + interface->num_tx_queues = rss_i * pcs; + + return true; +} + +/** + * fm10k_set_rss_queues: Allocate queues for RSS + * @interface: board private structure to initialize + * + * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try + * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU. + * + **/ +static bool fm10k_set_rss_queues(struct fm10k_intfc *interface) +{ + struct fm10k_ring_feature *f; + u16 rss_i; + + f = &interface->ring_feature[RING_F_RSS]; + rss_i = min_t(u16, interface->hw.mac.max_queues, f->limit); + + /* record indices and power of 2 mask for RSS */ + f->indices = rss_i; + f->mask = (1 << fls(rss_i - 1)) - 1; + + interface->num_rx_queues = rss_i; + interface->num_tx_queues = rss_i; + + return true; +} + +/** + * fm10k_set_num_queues: Allocate queues for device, feature dependent + * @interface: board private structure to initialize + * + * This is the top level queue allocation routine. The order here is very + * important, starting with the "most" number of features turned on at once, + * and ending with the smallest set of features. This way large combinations + * can be allocated if they're turned on, and smaller combinations are the + * fallthrough conditions. + * + **/ +static void fm10k_set_num_queues(struct fm10k_intfc *interface) +{ + /* Start with base case */ + interface->num_rx_queues = 1; + interface->num_tx_queues = 1; + + if (fm10k_set_qos_queues(interface)) + return; + + fm10k_set_rss_queues(interface); +} + +/** + * fm10k_alloc_q_vector - Allocate memory for a single interrupt vector + * @interface: board private structure to initialize + * @v_count: q_vectors allocated on interface, used for ring interleaving + * @v_idx: index of vector in interface struct + * @txr_count: total number of Tx rings to allocate + * @txr_idx: index of first Tx ring to allocate + * @rxr_count: total number of Rx rings to allocate + * @rxr_idx: index of first Rx ring to allocate + * + * We allocate one q_vector. If allocation fails we return -ENOMEM. + **/ +static int fm10k_alloc_q_vector(struct fm10k_intfc *interface, + unsigned int v_count, unsigned int v_idx, + unsigned int txr_count, unsigned int txr_idx, + unsigned int rxr_count, unsigned int rxr_idx) +{ + struct fm10k_q_vector *q_vector; + struct fm10k_ring *ring; + int ring_count, size; + + ring_count = txr_count + rxr_count; + size = sizeof(struct fm10k_q_vector) + + (sizeof(struct fm10k_ring) * ring_count); + + /* allocate q_vector and rings */ + q_vector = kzalloc(size, GFP_KERNEL); + if (!q_vector) + return -ENOMEM; + + /* initialize NAPI */ + netif_napi_add(interface->netdev, &q_vector->napi, + fm10k_poll, NAPI_POLL_WEIGHT); + + /* tie q_vector and interface together */ + interface->q_vector[v_idx] = q_vector; + q_vector->interface = interface; + q_vector->v_idx = v_idx; + + /* initialize pointer to rings */ + ring = q_vector->ring; + + /* save Tx ring container info */ + q_vector->tx.ring = ring; + q_vector->tx.work_limit = FM10K_DEFAULT_TX_WORK; + q_vector->tx.itr = interface->tx_itr; + q_vector->tx.count = txr_count; + + while (txr_count) { + /* assign generic ring traits */ + ring->dev = &interface->pdev->dev; + ring->netdev = interface->netdev; + + /* configure backlink on ring */ + ring->q_vector = q_vector; + + /* apply Tx specific ring traits */ + ring->count = interface->tx_ring_count; + ring->queue_index = txr_idx; + + /* assign ring to interface */ + interface->tx_ring[txr_idx] = ring; + + /* update count and index */ + txr_count--; + txr_idx += v_count; + + /* push pointer to next ring */ + ring++; + } + + /* save Rx ring container info */ + q_vector->rx.ring = ring; + q_vector->rx.itr = interface->rx_itr; + q_vector->rx.count = rxr_count; + + while (rxr_count) { + /* assign generic ring traits */ + ring->dev = &interface->pdev->dev; + ring->netdev = interface->netdev; + rcu_assign_pointer(ring->l2_accel, interface->l2_accel); + + /* configure backlink on ring */ + ring->q_vector = q_vector; + + /* apply Rx specific ring traits */ + ring->count = interface->rx_ring_count; + ring->queue_index = rxr_idx; + + /* assign ring to interface */ + interface->rx_ring[rxr_idx] = ring; + + /* update count and index */ + rxr_count--; + rxr_idx += v_count; + + /* push pointer to next ring */ + ring++; + } + + fm10k_dbg_q_vector_init(q_vector); + + return 0; +} + +/** + * fm10k_free_q_vector - Free memory allocated for specific interrupt vector + * @interface: board private structure to initialize + * @v_idx: Index of vector to be freed + * + * This function frees the memory allocated to the q_vector. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. + **/ +static void fm10k_free_q_vector(struct fm10k_intfc *interface, int v_idx) +{ + struct fm10k_q_vector *q_vector = interface->q_vector[v_idx]; + struct fm10k_ring *ring; + + fm10k_dbg_q_vector_exit(q_vector); + + fm10k_for_each_ring(ring, q_vector->tx) + interface->tx_ring[ring->queue_index] = NULL; + + fm10k_for_each_ring(ring, q_vector->rx) + interface->rx_ring[ring->queue_index] = NULL; + + interface->q_vector[v_idx] = NULL; + netif_napi_del(&q_vector->napi); + kfree_rcu(q_vector, rcu); +} + +/** + * fm10k_alloc_q_vectors - Allocate memory for interrupt vectors + * @interface: board private structure to initialize + * + * We allocate one q_vector per queue interrupt. If allocation fails we + * return -ENOMEM. + **/ +static int fm10k_alloc_q_vectors(struct fm10k_intfc *interface) +{ + unsigned int q_vectors = interface->num_q_vectors; + unsigned int rxr_remaining = interface->num_rx_queues; + unsigned int txr_remaining = interface->num_tx_queues; + unsigned int rxr_idx = 0, txr_idx = 0, v_idx = 0; + int err; + + if (q_vectors >= (rxr_remaining + txr_remaining)) { + for (; rxr_remaining; v_idx++) { + err = fm10k_alloc_q_vector(interface, q_vectors, v_idx, + 0, 0, 1, rxr_idx); + if (err) + goto err_out; + + /* update counts and index */ + rxr_remaining--; + rxr_idx++; + } + } + + for (; v_idx < q_vectors; v_idx++) { + int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_idx); + int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_idx); + + err = fm10k_alloc_q_vector(interface, q_vectors, v_idx, + tqpv, txr_idx, + rqpv, rxr_idx); + + if (err) + goto err_out; + + /* update counts and index */ + rxr_remaining -= rqpv; + txr_remaining -= tqpv; + rxr_idx++; + txr_idx++; + } + + return 0; + +err_out: + interface->num_tx_queues = 0; + interface->num_rx_queues = 0; + interface->num_q_vectors = 0; + + while (v_idx--) + fm10k_free_q_vector(interface, v_idx); + + return -ENOMEM; +} + +/** + * fm10k_free_q_vectors - Free memory allocated for interrupt vectors + * @interface: board private structure to initialize + * + * This function frees the memory allocated to the q_vectors. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. + **/ +static void fm10k_free_q_vectors(struct fm10k_intfc *interface) +{ + int v_idx = interface->num_q_vectors; + + interface->num_tx_queues = 0; + interface->num_rx_queues = 0; + interface->num_q_vectors = 0; + + while (v_idx--) + fm10k_free_q_vector(interface, v_idx); +} + +/** + * f10k_reset_msix_capability - reset MSI-X capability + * @interface: board private structure to initialize + * + * Reset the MSI-X capability back to its starting state + **/ +static void fm10k_reset_msix_capability(struct fm10k_intfc *interface) +{ + pci_disable_msix(interface->pdev); + kfree(interface->msix_entries); + interface->msix_entries = NULL; +} + +/** + * f10k_init_msix_capability - configure MSI-X capability + * @interface: board private structure to initialize + * + * Attempt to configure the interrupts using the best available + * capabilities of the hardware and the kernel. + **/ +static int fm10k_init_msix_capability(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + int v_budget, vector; + + /* It's easy to be greedy for MSI-X vectors, but it really + * doesn't do us much good if we have a lot more vectors + * than CPU's. So let's be conservative and only ask for + * (roughly) the same number of vectors as there are CPU's. + * the default is to use pairs of vectors + */ + v_budget = max(interface->num_rx_queues, interface->num_tx_queues); + v_budget = min_t(u16, v_budget, num_online_cpus()); + + /* account for vectors not related to queues */ + v_budget += NON_Q_VECTORS(hw); + + /* At the same time, hardware can only support a maximum of + * hw.mac->max_msix_vectors vectors. With features + * such as RSS and VMDq, we can easily surpass the number of Rx and Tx + * descriptor queues supported by our device. Thus, we cap it off in + * those rare cases where the cpu count also exceeds our vector limit. + */ + v_budget = min_t(int, v_budget, hw->mac.max_msix_vectors); + + /* A failure in MSI-X entry allocation is fatal. */ + interface->msix_entries = kcalloc(v_budget, sizeof(struct msix_entry), + GFP_KERNEL); + if (!interface->msix_entries) + return -ENOMEM; + + /* populate entry values */ + for (vector = 0; vector < v_budget; vector++) + interface->msix_entries[vector].entry = vector; + + /* Attempt to enable MSI-X with requested value */ + v_budget = pci_enable_msix_range(interface->pdev, + interface->msix_entries, + MIN_MSIX_COUNT(hw), + v_budget); + if (v_budget < 0) { + kfree(interface->msix_entries); + interface->msix_entries = NULL; + return -ENOMEM; + } + + /* record the number of queues available for q_vectors */ + interface->num_q_vectors = v_budget - NON_Q_VECTORS(hw); + + return 0; +} + +/** + * fm10k_cache_ring_qos - Descriptor ring to register mapping for QoS + * @interface: Interface structure continaining rings and devices + * + * Cache the descriptor ring offsets for Qos + **/ +static bool fm10k_cache_ring_qos(struct fm10k_intfc *interface) +{ + struct net_device *dev = interface->netdev; + int pc, offset, rss_i, i, q_idx; + u16 pc_stride = interface->ring_feature[RING_F_QOS].mask + 1; + u8 num_pcs = netdev_get_num_tc(dev); + + if (num_pcs <= 1) + return false; + + rss_i = interface->ring_feature[RING_F_RSS].indices; + + for (pc = 0, offset = 0; pc < num_pcs; pc++, offset += rss_i) { + q_idx = pc; + for (i = 0; i < rss_i; i++) { + interface->tx_ring[offset + i]->reg_idx = q_idx; + interface->tx_ring[offset + i]->qos_pc = pc; + interface->rx_ring[offset + i]->reg_idx = q_idx; + interface->rx_ring[offset + i]->qos_pc = pc; + q_idx += pc_stride; + } + } + + return true; +} + +/** + * fm10k_cache_ring_rss - Descriptor ring to register mapping for RSS + * @interface: Interface structure continaining rings and devices + * + * Cache the descriptor ring offsets for RSS + **/ +static void fm10k_cache_ring_rss(struct fm10k_intfc *interface) +{ + int i; + + for (i = 0; i < interface->num_rx_queues; i++) + interface->rx_ring[i]->reg_idx = i; + + for (i = 0; i < interface->num_tx_queues; i++) + interface->tx_ring[i]->reg_idx = i; +} + +/** + * fm10k_assign_rings - Map rings to network devices + * @interface: Interface structure containing rings and devices + * + * This function is meant to go though and configure both the network + * devices so that they contain rings, and configure the rings so that + * they function with their network devices. + **/ +static void fm10k_assign_rings(struct fm10k_intfc *interface) +{ + if (fm10k_cache_ring_qos(interface)) + return; + + fm10k_cache_ring_rss(interface); +} + +static void fm10k_init_reta(struct fm10k_intfc *interface) +{ + u16 i, rss_i = interface->ring_feature[RING_F_RSS].indices; + u32 reta, base; + + /* If the netdev is initialized we have to maintain table if possible */ + if (interface->netdev->reg_state) { + for (i = FM10K_RETA_SIZE; i--;) { + reta = interface->reta[i]; + if ((((reta << 24) >> 24) < rss_i) && + (((reta << 16) >> 24) < rss_i) && + (((reta << 8) >> 24) < rss_i) && + (((reta) >> 24) < rss_i)) + continue; + goto repopulate_reta; + } + + /* do nothing if all of the elements are in bounds */ + return; + } + +repopulate_reta: + /* Populate the redirection table 4 entries at a time. To do this + * we are generating the results for n and n+2 and then interleaving + * those with the results with n+1 and n+3. + */ + for (i = FM10K_RETA_SIZE; i--;) { + /* first pass generates n and n+2 */ + base = ((i * 0x00040004) + 0x00020000) * rss_i; + reta = (base & 0x3F803F80) >> 7; + + /* second pass generates n+1 and n+3 */ + base += 0x00010001 * rss_i; + reta |= (base & 0x3F803F80) << 1; + + interface->reta[i] = reta; + } +} + +/** + * fm10k_init_queueing_scheme - Determine proper queueing scheme + * @interface: board private structure to initialize + * + * We determine which queueing scheme to use based on... + * - Hardware queue count (num_*_queues) + * - defined by miscellaneous hardware support/features (RSS, etc.) + **/ +int fm10k_init_queueing_scheme(struct fm10k_intfc *interface) +{ + int err; + + /* Number of supported queues */ + fm10k_set_num_queues(interface); + + /* Configure MSI-X capability */ + err = fm10k_init_msix_capability(interface); + if (err) { + dev_err(&interface->pdev->dev, + "Unable to initialize MSI-X capability\n"); + return err; + } + + /* Allocate memory for queues */ + err = fm10k_alloc_q_vectors(interface); + if (err) + return err; + + /* Map rings to devices, and map devices to physical queues */ + fm10k_assign_rings(interface); + + /* Initialize RSS redirection table */ + fm10k_init_reta(interface); + + return 0; +} + +/** + * fm10k_clear_queueing_scheme - Clear the current queueing scheme settings + * @interface: board private structure to clear queueing scheme on + * + * We go through and clear queueing specific resources and reset the structure + * to pre-load conditions + **/ +void fm10k_clear_queueing_scheme(struct fm10k_intfc *interface) +{ + fm10k_free_q_vectors(interface); + fm10k_reset_msix_capability(interface); +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c new file mode 100644 index 00000000000..14a4ea795c0 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.c @@ -0,0 +1,2125 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k_common.h" + +/** + * fm10k_fifo_init - Initialize a message FIFO + * @fifo: pointer to FIFO + * @buffer: pointer to memory to be used to store FIFO + * @size: maximum message size to store in FIFO, must be 2^n - 1 + **/ +static void fm10k_fifo_init(struct fm10k_mbx_fifo *fifo, u32 *buffer, u16 size) +{ + fifo->buffer = buffer; + fifo->size = size; + fifo->head = 0; + fifo->tail = 0; +} + +/** + * fm10k_fifo_used - Retrieve used space in FIFO + * @fifo: pointer to FIFO + * + * This function returns the number of DWORDs used in the FIFO + **/ +static u16 fm10k_fifo_used(struct fm10k_mbx_fifo *fifo) +{ + return fifo->tail - fifo->head; +} + +/** + * fm10k_fifo_unused - Retrieve unused space in FIFO + * @fifo: pointer to FIFO + * + * This function returns the number of unused DWORDs in the FIFO + **/ +static u16 fm10k_fifo_unused(struct fm10k_mbx_fifo *fifo) +{ + return fifo->size + fifo->head - fifo->tail; +} + +/** + * fm10k_fifo_empty - Test to verify if fifo is empty + * @fifo: pointer to FIFO + * + * This function returns true if the FIFO is empty, else false + **/ +static bool fm10k_fifo_empty(struct fm10k_mbx_fifo *fifo) +{ + return fifo->head == fifo->tail; +} + +/** + * fm10k_fifo_head_offset - returns indices of head with given offset + * @fifo: pointer to FIFO + * @offset: offset to add to head + * + * This function returns the indicies into the fifo based on head + offset + **/ +static u16 fm10k_fifo_head_offset(struct fm10k_mbx_fifo *fifo, u16 offset) +{ + return (fifo->head + offset) & (fifo->size - 1); +} + +/** + * fm10k_fifo_tail_offset - returns indices of tail with given offset + * @fifo: pointer to FIFO + * @offset: offset to add to tail + * + * This function returns the indicies into the fifo based on tail + offset + **/ +static u16 fm10k_fifo_tail_offset(struct fm10k_mbx_fifo *fifo, u16 offset) +{ + return (fifo->tail + offset) & (fifo->size - 1); +} + +/** + * fm10k_fifo_head_len - Retrieve length of first message in FIFO + * @fifo: pointer to FIFO + * + * This function returns the size of the first message in the FIFO + **/ +static u16 fm10k_fifo_head_len(struct fm10k_mbx_fifo *fifo) +{ + u32 *head = fifo->buffer + fm10k_fifo_head_offset(fifo, 0); + + /* verify there is at least 1 DWORD in the fifo so *head is valid */ + if (fm10k_fifo_empty(fifo)) + return 0; + + /* retieve the message length */ + return FM10K_TLV_DWORD_LEN(*head); +} + +/** + * fm10k_fifo_head_drop - Drop the first message in FIFO + * @fifo: pointer to FIFO + * + * This function returns the size of the message dropped from the FIFO + **/ +static u16 fm10k_fifo_head_drop(struct fm10k_mbx_fifo *fifo) +{ + u16 len = fm10k_fifo_head_len(fifo); + + /* update head so it is at the start of next frame */ + fifo->head += len; + + return len; +} + +/** + * fm10k_mbx_index_len - Convert a head/tail index into a length value + * @mbx: pointer to mailbox + * @head: head index + * @tail: head index + * + * This function takes the head and tail index and determines the length + * of the data indicated by this pair. + **/ +static u16 fm10k_mbx_index_len(struct fm10k_mbx_info *mbx, u16 head, u16 tail) +{ + u16 len = tail - head; + + /* we wrapped so subtract 2, one for index 0, one for all 1s index */ + if (len > tail) + len -= 2; + + return len & ((mbx->mbmem_len << 1) - 1); +} + +/** + * fm10k_mbx_tail_add - Determine new tail value with added offset + * @mbx: pointer to mailbox + * @offset: length to add to head offset + * + * This function takes the local tail index and recomputes it for + * a given length added as an offset. + **/ +static u16 fm10k_mbx_tail_add(struct fm10k_mbx_info *mbx, u16 offset) +{ + u16 tail = (mbx->tail + offset + 1) & ((mbx->mbmem_len << 1) - 1); + + /* add/sub 1 because we cannot have offset 0 or all 1s */ + return (tail > mbx->tail) ? --tail : ++tail; +} + +/** + * fm10k_mbx_tail_sub - Determine new tail value with subtracted offset + * @mbx: pointer to mailbox + * @offset: length to add to head offset + * + * This function takes the local tail index and recomputes it for + * a given length added as an offset. + **/ +static u16 fm10k_mbx_tail_sub(struct fm10k_mbx_info *mbx, u16 offset) +{ + u16 tail = (mbx->tail - offset - 1) & ((mbx->mbmem_len << 1) - 1); + + /* sub/add 1 because we cannot have offset 0 or all 1s */ + return (tail < mbx->tail) ? ++tail : --tail; +} + +/** + * fm10k_mbx_head_add - Determine new head value with added offset + * @mbx: pointer to mailbox + * @offset: length to add to head offset + * + * This function takes the local head index and recomputes it for + * a given length added as an offset. + **/ +static u16 fm10k_mbx_head_add(struct fm10k_mbx_info *mbx, u16 offset) +{ + u16 head = (mbx->head + offset + 1) & ((mbx->mbmem_len << 1) - 1); + + /* add/sub 1 because we cannot have offset 0 or all 1s */ + return (head > mbx->head) ? --head : ++head; +} + +/** + * fm10k_mbx_head_sub - Determine new head value with subtracted offset + * @mbx: pointer to mailbox + * @offset: length to add to head offset + * + * This function takes the local head index and recomputes it for + * a given length added as an offset. + **/ +static u16 fm10k_mbx_head_sub(struct fm10k_mbx_info *mbx, u16 offset) +{ + u16 head = (mbx->head - offset - 1) & ((mbx->mbmem_len << 1) - 1); + + /* sub/add 1 because we cannot have offset 0 or all 1s */ + return (head < mbx->head) ? ++head : --head; +} + +/** + * fm10k_mbx_pushed_tail_len - Retrieve the length of message being pushed + * @mbx: pointer to mailbox + * + * This function will return the length of the message currently being + * pushed onto the tail of the Rx queue. + **/ +static u16 fm10k_mbx_pushed_tail_len(struct fm10k_mbx_info *mbx) +{ + u32 *tail = mbx->rx.buffer + fm10k_fifo_tail_offset(&mbx->rx, 0); + + /* pushed tail is only valid if pushed is set */ + if (!mbx->pushed) + return 0; + + return FM10K_TLV_DWORD_LEN(*tail); +} + +/** + * fm10k_fifo_write_copy - pulls data off of msg and places it in fifo + * @fifo: pointer to FIFO + * @msg: message array to populate + * @tail_offset: additional offset to add to tail pointer + * @len: length of FIFO to copy into message header + * + * This function will take a message and copy it into a section of the + * FIFO. In order to get something into a location other than just + * the tail you can use tail_offset to adjust the pointer. + **/ +static void fm10k_fifo_write_copy(struct fm10k_mbx_fifo *fifo, + const u32 *msg, u16 tail_offset, u16 len) +{ + u16 end = fm10k_fifo_tail_offset(fifo, tail_offset); + u32 *tail = fifo->buffer + end; + + /* track when we should cross the end of the FIFO */ + end = fifo->size - end; + + /* copy end of message before start of message */ + if (end < len) + memcpy(fifo->buffer, msg + end, (len - end) << 2); + else + end = len; + + /* Copy remaining message into Tx FIFO */ + memcpy(tail, msg, end << 2); +} + +/** + * fm10k_fifo_enqueue - Enqueues the message to the tail of the FIFO + * @fifo: pointer to FIFO + * @msg: message array to read + * + * This function enqueues a message up to the size specified by the length + * contained in the first DWORD of the message and will place at the tail + * of the FIFO. It will return 0 on success, or a negative value on error. + **/ +static s32 fm10k_fifo_enqueue(struct fm10k_mbx_fifo *fifo, const u32 *msg) +{ + u16 len = FM10K_TLV_DWORD_LEN(*msg); + + /* verify parameters */ + if (len > fifo->size) + return FM10K_MBX_ERR_SIZE; + + /* verify there is room for the message */ + if (len > fm10k_fifo_unused(fifo)) + return FM10K_MBX_ERR_NO_SPACE; + + /* Copy message into FIFO */ + fm10k_fifo_write_copy(fifo, msg, 0, len); + + /* memory barrier to guarantee FIFO is written before tail update */ + wmb(); + + /* Update Tx FIFO tail */ + fifo->tail += len; + + return 0; +} + +/** + * fm10k_mbx_validate_msg_size - Validate incoming message based on size + * @mbx: pointer to mailbox + * @len: length of data pushed onto buffer + * + * This function analyzes the frame and will return a non-zero value when + * the start of a message larger than the mailbox is detected. + **/ +static u16 fm10k_mbx_validate_msg_size(struct fm10k_mbx_info *mbx, u16 len) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + u16 total_len = 0, msg_len; + u32 *msg; + + /* length should include previous amounts pushed */ + len += mbx->pushed; + + /* offset in message is based off of current message size */ + do { + msg = fifo->buffer + fm10k_fifo_tail_offset(fifo, total_len); + msg_len = FM10K_TLV_DWORD_LEN(*msg); + total_len += msg_len; + } while (total_len < len); + + /* message extends out of pushed section, but fits in FIFO */ + if ((len < total_len) && (msg_len <= mbx->rx.size)) + return 0; + + /* return length of invalid section */ + return (len < total_len) ? len : (len - total_len); +} + +/** + * fm10k_mbx_write_copy - pulls data off of Tx FIFO and places it in mbmem + * @mbx: pointer to mailbox + * + * This function will take a seciton of the Rx FIFO and copy it into the + mbx->tail--; + * mailbox memory. The offset in mbmem is based on the lower bits of the + * tail and len determines the length to copy. + **/ +static void fm10k_mbx_write_copy(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_mbx_fifo *fifo = &mbx->tx; + u32 mbmem = mbx->mbmem_reg; + u32 *head = fifo->buffer; + u16 end, len, tail, mask; + + if (!mbx->tail_len) + return; + + /* determine data length and mbmem tail index */ + mask = mbx->mbmem_len - 1; + len = mbx->tail_len; + tail = fm10k_mbx_tail_sub(mbx, len); + if (tail > mask) + tail++; + + /* determine offset in the ring */ + end = fm10k_fifo_head_offset(fifo, mbx->pulled); + head += end; + + /* memory barrier to guarantee data is ready to be read */ + rmb(); + + /* Copy message from Tx FIFO */ + for (end = fifo->size - end; len; head = fifo->buffer) { + do { + /* adjust tail to match offset for FIFO */ + tail &= mask; + if (!tail) + tail++; + + /* write message to hardware FIFO */ + fm10k_write_reg(hw, mbmem + tail++, *(head++)); + } while (--len && --end); + } +} + +/** + * fm10k_mbx_pull_head - Pulls data off of head of Tx FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @head: acknowledgement number last received + * + * This function will push the tail index forward based on the remote + * head index. It will then pull up to mbmem_len DWORDs off of the + * head of the FIFO and will place it in the MBMEM registers + * associated with the mailbox. + **/ +static void fm10k_mbx_pull_head(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, u16 head) +{ + u16 mbmem_len, len, ack = fm10k_mbx_index_len(mbx, head, mbx->tail); + struct fm10k_mbx_fifo *fifo = &mbx->tx; + + /* update number of bytes pulled and update bytes in transit */ + mbx->pulled += mbx->tail_len - ack; + + /* determine length of data to pull, reserve space for mbmem header */ + mbmem_len = mbx->mbmem_len - 1; + len = fm10k_fifo_used(fifo) - mbx->pulled; + if (len > mbmem_len) + len = mbmem_len; + + /* update tail and record number of bytes in transit */ + mbx->tail = fm10k_mbx_tail_add(mbx, len - ack); + mbx->tail_len = len; + + /* drop pulled messages from the FIFO */ + for (len = fm10k_fifo_head_len(fifo); + len && (mbx->pulled >= len); + len = fm10k_fifo_head_len(fifo)) { + mbx->pulled -= fm10k_fifo_head_drop(fifo); + mbx->tx_messages++; + mbx->tx_dwords += len; + } + + /* Copy message out from the Tx FIFO */ + fm10k_mbx_write_copy(hw, mbx); +} + +/** + * fm10k_mbx_read_copy - pulls data off of mbmem and places it in Rx FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will take a seciton of the mailbox memory and copy it + * into the Rx FIFO. The offset is based on the lower bits of the + * head and len determines the length to copy. + **/ +static void fm10k_mbx_read_copy(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + u32 mbmem = mbx->mbmem_reg ^ mbx->mbmem_len; + u32 *tail = fifo->buffer; + u16 end, len, head; + + /* determine data length and mbmem head index */ + len = mbx->head_len; + head = fm10k_mbx_head_sub(mbx, len); + if (head >= mbx->mbmem_len) + head++; + + /* determine offset in the ring */ + end = fm10k_fifo_tail_offset(fifo, mbx->pushed); + tail += end; + + /* Copy message into Rx FIFO */ + for (end = fifo->size - end; len; tail = fifo->buffer) { + do { + /* adjust head to match offset for FIFO */ + head &= mbx->mbmem_len - 1; + if (!head) + head++; + + /* read message from hardware FIFO */ + *(tail++) = fm10k_read_reg(hw, mbmem + head++); + } while (--len && --end); + } + + /* memory barrier to guarantee FIFO is written before tail update */ + wmb(); +} + +/** + * fm10k_mbx_push_tail - Pushes up to 15 DWORDs on to tail of FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @tail: tail index of message + * + * This function will first validate the tail index and size for the + * incoming message. It then updates the acknowlegment number and + * copies the data into the FIFO. It will return the number of messages + * dequeued on success and a negative value on error. + **/ +static s32 fm10k_mbx_push_tail(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, + u16 tail) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + u16 len, seq = fm10k_mbx_index_len(mbx, mbx->head, tail); + + /* determine length of data to push */ + len = fm10k_fifo_unused(fifo) - mbx->pushed; + if (len > seq) + len = seq; + + /* update head and record bytes received */ + mbx->head = fm10k_mbx_head_add(mbx, len); + mbx->head_len = len; + + /* nothing to do if there is no data */ + if (!len) + return 0; + + /* Copy msg into Rx FIFO */ + fm10k_mbx_read_copy(hw, mbx); + + /* determine if there are any invalid lengths in message */ + if (fm10k_mbx_validate_msg_size(mbx, len)) + return FM10K_MBX_ERR_SIZE; + + /* Update pushed */ + mbx->pushed += len; + + /* flush any completed messages */ + for (len = fm10k_mbx_pushed_tail_len(mbx); + len && (mbx->pushed >= len); + len = fm10k_mbx_pushed_tail_len(mbx)) { + fifo->tail += len; + mbx->pushed -= len; + mbx->rx_messages++; + mbx->rx_dwords += len; + } + + return 0; +} + +/* pre-generated data for generating the CRC based on the poly 0xAC9A. */ +static const u16 fm10k_crc_16b_table[256] = { + 0x0000, 0x7956, 0xF2AC, 0x8BFA, 0xBC6D, 0xC53B, 0x4EC1, 0x3797, + 0x21EF, 0x58B9, 0xD343, 0xAA15, 0x9D82, 0xE4D4, 0x6F2E, 0x1678, + 0x43DE, 0x3A88, 0xB172, 0xC824, 0xFFB3, 0x86E5, 0x0D1F, 0x7449, + 0x6231, 0x1B67, 0x909D, 0xE9CB, 0xDE5C, 0xA70A, 0x2CF0, 0x55A6, + 0x87BC, 0xFEEA, 0x7510, 0x0C46, 0x3BD1, 0x4287, 0xC97D, 0xB02B, + 0xA653, 0xDF05, 0x54FF, 0x2DA9, 0x1A3E, 0x6368, 0xE892, 0x91C4, + 0xC462, 0xBD34, 0x36CE, 0x4F98, 0x780F, 0x0159, 0x8AA3, 0xF3F5, + 0xE58D, 0x9CDB, 0x1721, 0x6E77, 0x59E0, 0x20B6, 0xAB4C, 0xD21A, + 0x564D, 0x2F1B, 0xA4E1, 0xDDB7, 0xEA20, 0x9376, 0x188C, 0x61DA, + 0x77A2, 0x0EF4, 0x850E, 0xFC58, 0xCBCF, 0xB299, 0x3963, 0x4035, + 0x1593, 0x6CC5, 0xE73F, 0x9E69, 0xA9FE, 0xD0A8, 0x5B52, 0x2204, + 0x347C, 0x4D2A, 0xC6D0, 0xBF86, 0x8811, 0xF147, 0x7ABD, 0x03EB, + 0xD1F1, 0xA8A7, 0x235D, 0x5A0B, 0x6D9C, 0x14CA, 0x9F30, 0xE666, + 0xF01E, 0x8948, 0x02B2, 0x7BE4, 0x4C73, 0x3525, 0xBEDF, 0xC789, + 0x922F, 0xEB79, 0x6083, 0x19D5, 0x2E42, 0x5714, 0xDCEE, 0xA5B8, + 0xB3C0, 0xCA96, 0x416C, 0x383A, 0x0FAD, 0x76FB, 0xFD01, 0x8457, + 0xAC9A, 0xD5CC, 0x5E36, 0x2760, 0x10F7, 0x69A1, 0xE25B, 0x9B0D, + 0x8D75, 0xF423, 0x7FD9, 0x068F, 0x3118, 0x484E, 0xC3B4, 0xBAE2, + 0xEF44, 0x9612, 0x1DE8, 0x64BE, 0x5329, 0x2A7F, 0xA185, 0xD8D3, + 0xCEAB, 0xB7FD, 0x3C07, 0x4551, 0x72C6, 0x0B90, 0x806A, 0xF93C, + 0x2B26, 0x5270, 0xD98A, 0xA0DC, 0x974B, 0xEE1D, 0x65E7, 0x1CB1, + 0x0AC9, 0x739F, 0xF865, 0x8133, 0xB6A4, 0xCFF2, 0x4408, 0x3D5E, + 0x68F8, 0x11AE, 0x9A54, 0xE302, 0xD495, 0xADC3, 0x2639, 0x5F6F, + 0x4917, 0x3041, 0xBBBB, 0xC2ED, 0xF57A, 0x8C2C, 0x07D6, 0x7E80, + 0xFAD7, 0x8381, 0x087B, 0x712D, 0x46BA, 0x3FEC, 0xB416, 0xCD40, + 0xDB38, 0xA26E, 0x2994, 0x50C2, 0x6755, 0x1E03, 0x95F9, 0xECAF, + 0xB909, 0xC05F, 0x4BA5, 0x32F3, 0x0564, 0x7C32, 0xF7C8, 0x8E9E, + 0x98E6, 0xE1B0, 0x6A4A, 0x131C, 0x248B, 0x5DDD, 0xD627, 0xAF71, + 0x7D6B, 0x043D, 0x8FC7, 0xF691, 0xC106, 0xB850, 0x33AA, 0x4AFC, + 0x5C84, 0x25D2, 0xAE28, 0xD77E, 0xE0E9, 0x99BF, 0x1245, 0x6B13, + 0x3EB5, 0x47E3, 0xCC19, 0xB54F, 0x82D8, 0xFB8E, 0x7074, 0x0922, + 0x1F5A, 0x660C, 0xEDF6, 0x94A0, 0xA337, 0xDA61, 0x519B, 0x28CD }; + +/** + * fm10k_crc_16b - Generate a 16 bit CRC for a region of 16 bit data + * @data: pointer to data to process + * @seed: seed value for CRC + * @len: length measured in 16 bits words + * + * This function will generate a CRC based on the polynomial 0xAC9A and + * whatever value is stored in the seed variable. Note that this + * value inverts the local seed and the result in order to capture all + * leading and trailing zeros. + */ +static u16 fm10k_crc_16b(const u32 *data, u16 seed, u16 len) +{ + u32 result = seed; + + while (len--) { + result ^= *(data++); + result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF]; + result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF]; + + if (!(len--)) + break; + + result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF]; + result = (result >> 8) ^ fm10k_crc_16b_table[result & 0xFF]; + } + + return (u16)result; +} + +/** + * fm10k_fifo_crc - generate a CRC based off of FIFO data + * @fifo: pointer to FIFO + * @offset: offset point for start of FIFO + * @len: number of DWORDS words to process + * @seed: seed value for CRC + * + * This function generates a CRC for some region of the FIFO + **/ +static u16 fm10k_fifo_crc(struct fm10k_mbx_fifo *fifo, u16 offset, + u16 len, u16 seed) +{ + u32 *data = fifo->buffer + offset; + + /* track when we should cross the end of the FIFO */ + offset = fifo->size - offset; + + /* if we are in 2 blocks process the end of the FIFO first */ + if (offset < len) { + seed = fm10k_crc_16b(data, seed, offset * 2); + data = fifo->buffer; + len -= offset; + } + + /* process any remaining bits */ + return fm10k_crc_16b(data, seed, len * 2); +} + +/** + * fm10k_mbx_update_local_crc - Update the local CRC for outgoing data + * @mbx: pointer to mailbox + * @head: head index provided by remote mailbox + * + * This function will generate the CRC for all data from the end of the + * last head update to the current one. It uses the result of the + * previous CRC as the seed for this update. The result is stored in + * mbx->local. + **/ +static void fm10k_mbx_update_local_crc(struct fm10k_mbx_info *mbx, u16 head) +{ + u16 len = mbx->tail_len - fm10k_mbx_index_len(mbx, head, mbx->tail); + + /* determine the offset for the start of the region to be pulled */ + head = fm10k_fifo_head_offset(&mbx->tx, mbx->pulled); + + /* update local CRC to include all of the pulled data */ + mbx->local = fm10k_fifo_crc(&mbx->tx, head, len, mbx->local); +} + +/** + * fm10k_mbx_verify_remote_crc - Verify the CRC is correct for current data + * @mbx: pointer to mailbox + * + * This function will take all data that has been provided from the remote + * end and generate a CRC for it. This is stored in mbx->remote. The + * CRC for the header is then computed and if the result is non-zero this + * is an error and we signal an error dropping all data and resetting the + * connection. + */ +static s32 fm10k_mbx_verify_remote_crc(struct fm10k_mbx_info *mbx) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + u16 len = mbx->head_len; + u16 offset = fm10k_fifo_tail_offset(fifo, mbx->pushed) - len; + u16 crc; + + /* update the remote CRC if new data has been received */ + if (len) + mbx->remote = fm10k_fifo_crc(fifo, offset, len, mbx->remote); + + /* process the full header as we have to validate the CRC */ + crc = fm10k_crc_16b(&mbx->mbx_hdr, mbx->remote, 1); + + /* notify other end if we have a problem */ + return crc ? FM10K_MBX_ERR_CRC : 0; +} + +/** + * fm10k_mbx_rx_ready - Indicates that a message is ready in the Rx FIFO + * @mbx: pointer to mailbox + * + * This function returns true if there is a message in the Rx FIFO to dequeue. + **/ +static bool fm10k_mbx_rx_ready(struct fm10k_mbx_info *mbx) +{ + u16 msg_size = fm10k_fifo_head_len(&mbx->rx); + + return msg_size && (fm10k_fifo_used(&mbx->rx) >= msg_size); +} + +/** + * fm10k_mbx_tx_ready - Indicates that the mailbox is in state ready for Tx + * @mbx: pointer to mailbox + * @len: verify free space is >= this value + * + * This function returns true if the mailbox is in a state ready to transmit. + **/ +static bool fm10k_mbx_tx_ready(struct fm10k_mbx_info *mbx, u16 len) +{ + u16 fifo_unused = fm10k_fifo_unused(&mbx->tx); + + return (mbx->state == FM10K_STATE_OPEN) && (fifo_unused >= len); +} + +/** + * fm10k_mbx_tx_complete - Indicates that the Tx FIFO has been emptied + * @mbx: pointer to mailbox + * + * This function returns true if the Tx FIFO is empty. + **/ +static bool fm10k_mbx_tx_complete(struct fm10k_mbx_info *mbx) +{ + return fm10k_fifo_empty(&mbx->tx); +} + +/** + * fm10k_mbx_deqeueue_rx - Dequeues the message from the head in the Rx FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function dequeues messages and hands them off to the tlv parser. + * It will return the number of messages processed when called. + **/ +static u16 fm10k_mbx_dequeue_rx(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_mbx_fifo *fifo = &mbx->rx; + s32 err; + u16 cnt; + + /* parse Rx messages out of the Rx FIFO to empty it */ + for (cnt = 0; !fm10k_fifo_empty(fifo); cnt++) { + err = fm10k_tlv_msg_parse(hw, fifo->buffer + fifo->head, + mbx, mbx->msg_data); + if (err < 0) + mbx->rx_parse_err++; + + fm10k_fifo_head_drop(fifo); + } + + /* shift remaining bytes back to start of FIFO */ + memmove(fifo->buffer, fifo->buffer + fifo->tail, mbx->pushed << 2); + + /* shift head and tail based on the memory we moved */ + fifo->tail -= fifo->head; + fifo->head = 0; + + return cnt; +} + +/** + * fm10k_mbx_enqueue_tx - Enqueues the message to the tail of the Tx FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @msg: message array to read + * + * This function enqueues a message up to the size specified by the length + * contained in the first DWORD of the message and will place at the tail + * of the FIFO. It will return 0 on success, or a negative value on error. + **/ +static s32 fm10k_mbx_enqueue_tx(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, const u32 *msg) +{ + u32 countdown = mbx->timeout; + s32 err; + + switch (mbx->state) { + case FM10K_STATE_CLOSED: + case FM10K_STATE_DISCONNECT: + return FM10K_MBX_ERR_NO_MBX; + default: + break; + } + + /* enqueue the message on the Tx FIFO */ + err = fm10k_fifo_enqueue(&mbx->tx, msg); + + /* if it failed give the FIFO a chance to drain */ + while (err && countdown) { + countdown--; + udelay(mbx->udelay); + mbx->ops.process(hw, mbx); + err = fm10k_fifo_enqueue(&mbx->tx, msg); + } + + /* if we failed trhead the error */ + if (err) { + mbx->timeout = 0; + mbx->tx_busy++; + } + + /* begin processing message, ignore errors as this is just meant + * to start the mailbox flow so we are not concerned if there + * is a bad error, or the mailbox is already busy with a request + */ + if (!mbx->tail_len) + mbx->ops.process(hw, mbx); + + return 0; +} + +/** + * fm10k_mbx_read - Copies the mbmem to local message buffer + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function copies the message from the mbmem to the message array + **/ +static s32 fm10k_mbx_read(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) +{ + /* only allow one reader in here at a time */ + if (mbx->mbx_hdr) + return FM10K_MBX_ERR_BUSY; + + /* read to capture initial interrupt bits */ + if (fm10k_read_reg(hw, mbx->mbx_reg) & FM10K_MBX_REQ_INTERRUPT) + mbx->mbx_lock = FM10K_MBX_ACK; + + /* write back interrupt bits to clear */ + fm10k_write_reg(hw, mbx->mbx_reg, + FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT); + + /* read remote header */ + mbx->mbx_hdr = fm10k_read_reg(hw, mbx->mbmem_reg ^ mbx->mbmem_len); + + return 0; +} + +/** + * fm10k_mbx_write - Copies the local message buffer to mbmem + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function copies the message from the the message array to mbmem + **/ +static void fm10k_mbx_write(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) +{ + u32 mbmem = mbx->mbmem_reg; + + /* write new msg header to notify recepient of change */ + fm10k_write_reg(hw, mbmem, mbx->mbx_hdr); + + /* write mailbox to sent interrupt */ + if (mbx->mbx_lock) + fm10k_write_reg(hw, mbx->mbx_reg, mbx->mbx_lock); + + /* we no longer are using the header so free it */ + mbx->mbx_hdr = 0; + mbx->mbx_lock = 0; +} + +/** + * fm10k_mbx_create_connect_hdr - Generate a connect mailbox header + * @mbx: pointer to mailbox + * + * This function returns a connection mailbox header + **/ +static void fm10k_mbx_create_connect_hdr(struct fm10k_mbx_info *mbx) +{ + mbx->mbx_lock |= FM10K_MBX_REQ; + + mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_CONNECT, TYPE) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD) | + FM10K_MSG_HDR_FIELD_SET(mbx->rx.size - 1, CONNECT_SIZE); +} + +/** + * fm10k_mbx_create_data_hdr - Generate a data mailbox header + * @mbx: pointer to mailbox + * + * This function returns a data mailbox header + **/ +static void fm10k_mbx_create_data_hdr(struct fm10k_mbx_info *mbx) +{ + u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DATA, TYPE) | + FM10K_MSG_HDR_FIELD_SET(mbx->tail, TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD); + struct fm10k_mbx_fifo *fifo = &mbx->tx; + u16 crc; + + if (mbx->tail_len) + mbx->mbx_lock |= FM10K_MBX_REQ; + + /* generate CRC for data in flight and header */ + crc = fm10k_fifo_crc(fifo, fm10k_fifo_head_offset(fifo, mbx->pulled), + mbx->tail_len, mbx->local); + crc = fm10k_crc_16b(&hdr, crc, 1); + + /* load header to memory to be written */ + mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC); +} + +/** + * fm10k_mbx_create_disconnect_hdr - Generate a disconnect mailbox header + * @mbx: pointer to mailbox + * + * This function returns a disconnect mailbox header + **/ +static void fm10k_mbx_create_disconnect_hdr(struct fm10k_mbx_info *mbx) +{ + u32 hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_DISCONNECT, TYPE) | + FM10K_MSG_HDR_FIELD_SET(mbx->tail, TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD); + u16 crc = fm10k_crc_16b(&hdr, mbx->local, 1); + + mbx->mbx_lock |= FM10K_MBX_ACK; + + /* load header to memory to be written */ + mbx->mbx_hdr = hdr | FM10K_MSG_HDR_FIELD_SET(crc, CRC); +} + +/** + * fm10k_mbx_create_error_msg - Generate a error message + * @mbx: pointer to mailbox + * @err: local error encountered + * + * This function will interpret the error provided by err, and based on + * that it may shift the message by 1 DWORD and then place an error header + * at the start of the message. + **/ +static void fm10k_mbx_create_error_msg(struct fm10k_mbx_info *mbx, s32 err) +{ + /* only generate an error message for these types */ + switch (err) { + case FM10K_MBX_ERR_TAIL: + case FM10K_MBX_ERR_HEAD: + case FM10K_MBX_ERR_TYPE: + case FM10K_MBX_ERR_SIZE: + case FM10K_MBX_ERR_RSVD0: + case FM10K_MBX_ERR_CRC: + break; + default: + return; + } + + mbx->mbx_lock |= FM10K_MBX_REQ; + + mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(FM10K_MSG_ERROR, TYPE) | + FM10K_MSG_HDR_FIELD_SET(err, ERR_NO) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, HEAD); +} + +/** + * fm10k_mbx_validate_msg_hdr - Validate common fields in the message header + * @mbx: pointer to mailbox + * @msg: message array to read + * + * This function will parse up the fields in the mailbox header and return + * an error if the header contains any of a number of invalid configurations + * including unrecognized type, invalid route, or a malformed message. + **/ +static s32 fm10k_mbx_validate_msg_hdr(struct fm10k_mbx_info *mbx) +{ + u16 type, rsvd0, head, tail, size; + const u32 *hdr = &mbx->mbx_hdr; + + type = FM10K_MSG_HDR_FIELD_GET(*hdr, TYPE); + rsvd0 = FM10K_MSG_HDR_FIELD_GET(*hdr, RSVD0); + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL); + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + size = FM10K_MSG_HDR_FIELD_GET(*hdr, CONNECT_SIZE); + + if (rsvd0) + return FM10K_MBX_ERR_RSVD0; + + switch (type) { + case FM10K_MSG_DISCONNECT: + /* validate that all data has been received */ + if (tail != mbx->head) + return FM10K_MBX_ERR_TAIL; + + /* fall through */ + case FM10K_MSG_DATA: + /* validate that head is moving correctly */ + if (!head || (head == FM10K_MSG_HDR_MASK(HEAD))) + return FM10K_MBX_ERR_HEAD; + if (fm10k_mbx_index_len(mbx, head, mbx->tail) > mbx->tail_len) + return FM10K_MBX_ERR_HEAD; + + /* validate that tail is moving correctly */ + if (!tail || (tail == FM10K_MSG_HDR_MASK(TAIL))) + return FM10K_MBX_ERR_TAIL; + if (fm10k_mbx_index_len(mbx, mbx->head, tail) < mbx->mbmem_len) + break; + + return FM10K_MBX_ERR_TAIL; + case FM10K_MSG_CONNECT: + /* validate size is in range and is power of 2 mask */ + if ((size < FM10K_VFMBX_MSG_MTU) || (size & (size + 1))) + return FM10K_MBX_ERR_SIZE; + + /* fall through */ + case FM10K_MSG_ERROR: + if (!head || (head == FM10K_MSG_HDR_MASK(HEAD))) + return FM10K_MBX_ERR_HEAD; + /* neither create nor error include a tail offset */ + if (tail) + return FM10K_MBX_ERR_TAIL; + + break; + default: + return FM10K_MBX_ERR_TYPE; + } + + return 0; +} + +/** + * fm10k_mbx_create_reply - Generate reply based on state and remote head + * @mbx: pointer to mailbox + * @head: acknowledgement number + * + * This function will generate an outgoing message based on the current + * mailbox state and the remote fifo head. It will return the length + * of the outgoing message excluding header on success, and a negative value + * on error. + **/ +static s32 fm10k_mbx_create_reply(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, u16 head) +{ + switch (mbx->state) { + case FM10K_STATE_OPEN: + case FM10K_STATE_DISCONNECT: + /* update our checksum for the outgoing data */ + fm10k_mbx_update_local_crc(mbx, head); + + /* as long as other end recognizes us keep sending data */ + fm10k_mbx_pull_head(hw, mbx, head); + + /* generate new header based on data */ + if (mbx->tail_len || (mbx->state == FM10K_STATE_OPEN)) + fm10k_mbx_create_data_hdr(mbx); + else + fm10k_mbx_create_disconnect_hdr(mbx); + break; + case FM10K_STATE_CONNECT: + /* send disconnect even if we aren't connected */ + fm10k_mbx_create_connect_hdr(mbx); + break; + case FM10K_STATE_CLOSED: + /* generate new header based on data */ + fm10k_mbx_create_disconnect_hdr(mbx); + default: + break; + } + + return 0; +} + +/** + * fm10k_mbx_reset_work- Reset internal pointers for any pending work + * @mbx: pointer to mailbox + * + * This function will reset all internal pointers so any work in progress + * is dropped. This call should occur every time we transition from the + * open state to the connect state. + **/ +static void fm10k_mbx_reset_work(struct fm10k_mbx_info *mbx) +{ + /* reset our outgoing max size back to Rx limits */ + mbx->max_size = mbx->rx.size - 1; + + /* just do a quick resysnc to start of message */ + mbx->pushed = 0; + mbx->pulled = 0; + mbx->tail_len = 0; + mbx->head_len = 0; + mbx->rx.tail = 0; + mbx->rx.head = 0; +} + +/** + * fm10k_mbx_update_max_size - Update the max_size and drop any large messages + * @mbx: pointer to mailbox + * @size: new value for max_size + * + * This function will update the max_size value and drop any outgoing messages + * from the head of the Tx FIFO that are larger than max_size. + **/ +static void fm10k_mbx_update_max_size(struct fm10k_mbx_info *mbx, u16 size) +{ + u16 len; + + mbx->max_size = size; + + /* flush any oversized messages from the queue */ + for (len = fm10k_fifo_head_len(&mbx->tx); + len > size; + len = fm10k_fifo_head_len(&mbx->tx)) { + fm10k_fifo_head_drop(&mbx->tx); + mbx->tx_dropped++; + } +} + +/** + * fm10k_mbx_connect_reset - Reset following request for reset + * @mbx: pointer to mailbox + * + * This function resets the mailbox to either a disconnected state + * or a connect state depending on the current mailbox state + **/ +static void fm10k_mbx_connect_reset(struct fm10k_mbx_info *mbx) +{ + /* just do a quick resysnc to start of frame */ + fm10k_mbx_reset_work(mbx); + + /* reset CRC seeds */ + mbx->local = FM10K_MBX_CRC_SEED; + mbx->remote = FM10K_MBX_CRC_SEED; + + /* we cannot exit connect until the size is good */ + if (mbx->state == FM10K_STATE_OPEN) + mbx->state = FM10K_STATE_CONNECT; + else + mbx->state = FM10K_STATE_CLOSED; +} + +/** + * fm10k_mbx_process_connect - Process connect header + * @mbx: pointer to mailbox + * @msg: message array to process + * + * This function will read an incoming connect header and reply with the + * appropriate message. It will return a value indicating the number of + * data DWORDs on success, or will return a negative value on failure. + **/ +static s32 fm10k_mbx_process_connect(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const enum fm10k_mbx_state state = mbx->state; + const u32 *hdr = &mbx->mbx_hdr; + u16 size, head; + + /* we will need to pull all of the fields for verification */ + size = FM10K_MSG_HDR_FIELD_GET(*hdr, CONNECT_SIZE); + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + + switch (state) { + case FM10K_STATE_DISCONNECT: + case FM10K_STATE_OPEN: + /* reset any in-progress work */ + fm10k_mbx_connect_reset(mbx); + break; + case FM10K_STATE_CONNECT: + /* we cannot exit connect until the size is good */ + if (size > mbx->rx.size) { + mbx->max_size = mbx->rx.size - 1; + } else { + /* record the remote system requesting connection */ + mbx->state = FM10K_STATE_OPEN; + + fm10k_mbx_update_max_size(mbx, size); + } + break; + default: + break; + } + + /* align our tail index to remote head index */ + mbx->tail = head; + + return fm10k_mbx_create_reply(hw, mbx, head); +} + +/** + * fm10k_mbx_process_data - Process data header + * @mbx: pointer to mailbox + * + * This function will read an incoming data header and reply with the + * appropriate message. It will return a value indicating the number of + * data DWORDs on success, or will return a negative value on failure. + **/ +static s32 fm10k_mbx_process_data(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const u32 *hdr = &mbx->mbx_hdr; + u16 head, tail; + s32 err; + + /* we will need to pull all of the fields for verification */ + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL); + + /* if we are in connect just update our data and go */ + if (mbx->state == FM10K_STATE_CONNECT) { + mbx->tail = head; + mbx->state = FM10K_STATE_OPEN; + } + + /* abort on message size errors */ + err = fm10k_mbx_push_tail(hw, mbx, tail); + if (err < 0) + return err; + + /* verify the checksum on the incoming data */ + err = fm10k_mbx_verify_remote_crc(mbx); + if (err) + return err; + + /* process messages if we have received any */ + fm10k_mbx_dequeue_rx(hw, mbx); + + return fm10k_mbx_create_reply(hw, mbx, head); +} + +/** + * fm10k_mbx_process_disconnect - Process disconnect header + * @mbx: pointer to mailbox + * + * This function will read an incoming disconnect header and reply with the + * appropriate message. It will return a value indicating the number of + * data DWORDs on success, or will return a negative value on failure. + **/ +static s32 fm10k_mbx_process_disconnect(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const enum fm10k_mbx_state state = mbx->state; + const u32 *hdr = &mbx->mbx_hdr; + u16 head, tail; + s32 err; + + /* we will need to pull all of the fields for verification */ + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, TAIL); + + /* We should not be receiving disconnect if Rx is incomplete */ + if (mbx->pushed) + return FM10K_MBX_ERR_TAIL; + + /* we have already verified mbx->head == tail so we know this is 0 */ + mbx->head_len = 0; + + /* verify the checksum on the incoming header is correct */ + err = fm10k_mbx_verify_remote_crc(mbx); + if (err) + return err; + + switch (state) { + case FM10K_STATE_DISCONNECT: + case FM10K_STATE_OPEN: + /* state doesn't change if we still have work to do */ + if (!fm10k_mbx_tx_complete(mbx)) + break; + + /* verify the head indicates we completed all transmits */ + if (head != mbx->tail) + return FM10K_MBX_ERR_HEAD; + + /* reset any in-progress work */ + fm10k_mbx_connect_reset(mbx); + break; + default: + break; + } + + return fm10k_mbx_create_reply(hw, mbx, head); +} + +/** + * fm10k_mbx_process_error - Process error header + * @mbx: pointer to mailbox + * + * This function will read an incoming error header and reply with the + * appropriate message. It will return a value indicating the number of + * data DWORDs on success, or will return a negative value on failure. + **/ +static s32 fm10k_mbx_process_error(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const u32 *hdr = &mbx->mbx_hdr; + s32 err_no; + u16 head; + + /* we will need to pull all of the fields for verification */ + head = FM10K_MSG_HDR_FIELD_GET(*hdr, HEAD); + + /* we only have lower 10 bits of error number os add upper bits */ + err_no = FM10K_MSG_HDR_FIELD_GET(*hdr, ERR_NO); + err_no |= ~FM10K_MSG_HDR_MASK(ERR_NO); + + switch (mbx->state) { + case FM10K_STATE_OPEN: + case FM10K_STATE_DISCONNECT: + /* flush any uncompleted work */ + fm10k_mbx_reset_work(mbx); + + /* reset CRC seeds */ + mbx->local = FM10K_MBX_CRC_SEED; + mbx->remote = FM10K_MBX_CRC_SEED; + + /* reset tail index and size to prepare for reconnect */ + mbx->tail = head; + + /* if open then reset max_size and go back to connect */ + if (mbx->state == FM10K_STATE_OPEN) { + mbx->state = FM10K_STATE_CONNECT; + break; + } + + /* send a connect message to get data flowing again */ + fm10k_mbx_create_connect_hdr(mbx); + return 0; + default: + break; + } + + return fm10k_mbx_create_reply(hw, mbx, mbx->tail); +} + +/** + * fm10k_mbx_process - Process mailbox interrupt + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will process incoming mailbox events and generate mailbox + * replies. It will return a value indicating the number of DWORDs + * transmitted excluding header on success or a negative value on error. + **/ +static s32 fm10k_mbx_process(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + s32 err; + + /* we do not read mailbox if closed */ + if (mbx->state == FM10K_STATE_CLOSED) + return 0; + + /* copy data from mailbox */ + err = fm10k_mbx_read(hw, mbx); + if (err) + return err; + + /* validate type, source, and destination */ + err = fm10k_mbx_validate_msg_hdr(mbx); + if (err < 0) + goto msg_err; + + switch (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, TYPE)) { + case FM10K_MSG_CONNECT: + err = fm10k_mbx_process_connect(hw, mbx); + break; + case FM10K_MSG_DATA: + err = fm10k_mbx_process_data(hw, mbx); + break; + case FM10K_MSG_DISCONNECT: + err = fm10k_mbx_process_disconnect(hw, mbx); + break; + case FM10K_MSG_ERROR: + err = fm10k_mbx_process_error(hw, mbx); + break; + default: + err = FM10K_MBX_ERR_TYPE; + break; + } + +msg_err: + /* notify partner of errors on our end */ + if (err < 0) + fm10k_mbx_create_error_msg(mbx, err); + + /* copy data from mailbox */ + fm10k_mbx_write(hw, mbx); + + return err; +} + +/** + * fm10k_mbx_disconnect - Shutdown mailbox connection + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will shut down the mailbox. It places the mailbox first + * in the disconnect state, it then allows up to a predefined timeout for + * the mailbox to transition to close on its own. If this does not occur + * then the mailbox will be forced into the closed state. + * + * Any mailbox transactions not completed before calling this function + * are not guaranteed to complete and may be dropped. + **/ +static void fm10k_mbx_disconnect(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + int timeout = mbx->timeout ? FM10K_MBX_DISCONNECT_TIMEOUT : 0; + + /* Place mbx in ready to disconnect state */ + mbx->state = FM10K_STATE_DISCONNECT; + + /* trigger interrupt to start shutdown process */ + fm10k_write_reg(hw, mbx->mbx_reg, FM10K_MBX_REQ | + FM10K_MBX_INTERRUPT_DISABLE); + do { + udelay(FM10K_MBX_POLL_DELAY); + mbx->ops.process(hw, mbx); + timeout -= FM10K_MBX_POLL_DELAY; + } while ((timeout > 0) && (mbx->state != FM10K_STATE_CLOSED)); + + /* in case we didn't close just force the mailbox into shutdown */ + fm10k_mbx_connect_reset(mbx); + fm10k_mbx_update_max_size(mbx, 0); + + fm10k_write_reg(hw, mbx->mbmem_reg, 0); +} + +/** + * fm10k_mbx_connect - Start mailbox connection + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will initiate a mailbox connection. It will populate the + * mailbox with a broadcast connect message and then initialize the lock. + * This is safe since the connect message is a single DWORD so the mailbox + * transaction is guaranteed to be atomic. + * + * This function will return an error if the mailbox has not been initiated + * or is currently in use. + **/ +static s32 fm10k_mbx_connect(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) +{ + /* we cannot connect an uninitialized mailbox */ + if (!mbx->rx.buffer) + return FM10K_MBX_ERR_NO_SPACE; + + /* we cannot connect an already connected mailbox */ + if (mbx->state != FM10K_STATE_CLOSED) + return FM10K_MBX_ERR_BUSY; + + /* mailbox timeout can now become active */ + mbx->timeout = FM10K_MBX_INIT_TIMEOUT; + + /* Place mbx in ready to connect state */ + mbx->state = FM10K_STATE_CONNECT; + + /* initialize header of remote mailbox */ + fm10k_mbx_create_disconnect_hdr(mbx); + fm10k_write_reg(hw, mbx->mbmem_reg ^ mbx->mbmem_len, mbx->mbx_hdr); + + /* enable interrupt and notify other party of new message */ + mbx->mbx_lock = FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT | + FM10K_MBX_INTERRUPT_ENABLE; + + /* generate and load connect header into mailbox */ + fm10k_mbx_create_connect_hdr(mbx); + fm10k_mbx_write(hw, mbx); + + return 0; +} + +/** + * fm10k_mbx_validate_handlers - Validate layout of message parsing data + * @msg_data: handlers for mailbox events + * + * This function validates the layout of the message parsing data. This + * should be mostly static, but it is important to catch any errors that + * are made when constructing the parsers. + **/ +static s32 fm10k_mbx_validate_handlers(const struct fm10k_msg_data *msg_data) +{ + const struct fm10k_tlv_attr *attr; + unsigned int id; + + /* Allow NULL mailboxes that transmit but don't receive */ + if (!msg_data) + return 0; + + while (msg_data->id != FM10K_TLV_ERROR) { + /* all messages should have a function handler */ + if (!msg_data->func) + return FM10K_ERR_PARAM; + + /* parser is optional */ + attr = msg_data->attr; + if (attr) { + while (attr->id != FM10K_TLV_ERROR) { + id = attr->id; + attr++; + /* ID should always be increasing */ + if (id >= attr->id) + return FM10K_ERR_PARAM; + /* ID should fit in results array */ + if (id >= FM10K_TLV_RESULTS_MAX) + return FM10K_ERR_PARAM; + } + + /* verify terminator is in the list */ + if (attr->id != FM10K_TLV_ERROR) + return FM10K_ERR_PARAM; + } + + id = msg_data->id; + msg_data++; + /* ID should always be increasing */ + if (id >= msg_data->id) + return FM10K_ERR_PARAM; + } + + /* verify terminator is in the list */ + if ((msg_data->id != FM10K_TLV_ERROR) || !msg_data->func) + return FM10K_ERR_PARAM; + + return 0; +} + +/** + * fm10k_mbx_register_handlers - Register a set of handler ops for mailbox + * @mbx: pointer to mailbox + * @msg_data: handlers for mailbox events + * + * This function associates a set of message handling ops with a mailbox. + **/ +static s32 fm10k_mbx_register_handlers(struct fm10k_mbx_info *mbx, + const struct fm10k_msg_data *msg_data) +{ + /* validate layout of handlers before assigning them */ + if (fm10k_mbx_validate_handlers(msg_data)) + return FM10K_ERR_PARAM; + + /* initialize the message handlers */ + mbx->msg_data = msg_data; + + return 0; +} + +/** + * fm10k_pfvf_mbx_init - Initialize mailbox memory for PF/VF mailbox + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @msg_data: handlers for mailbox events + * @id: ID reference for PF as it supports up to 64 PF/VF mailboxes + * + * This function initializes the mailbox for use. It will split the + * buffer provided an use that th populate both the Tx and Rx FIFO by + * evenly splitting it. In order to allow for easy masking of head/tail + * the value reported in size must be a power of 2 and is reported in + * DWORDs, not bytes. Any invalid values will cause the mailbox to return + * error. + **/ +s32 fm10k_pfvf_mbx_init(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx, + const struct fm10k_msg_data *msg_data, u8 id) +{ + /* initialize registers */ + switch (hw->mac.type) { + case fm10k_mac_vf: + mbx->mbx_reg = FM10K_VFMBX; + mbx->mbmem_reg = FM10K_VFMBMEM(FM10K_VFMBMEM_VF_XOR); + break; + case fm10k_mac_pf: + /* there are only 64 VF <-> PF mailboxes */ + if (id < 64) { + mbx->mbx_reg = FM10K_MBX(id); + mbx->mbmem_reg = FM10K_MBMEM_VF(id, 0); + break; + } + /* fallthough */ + default: + return FM10K_MBX_ERR_NO_MBX; + } + + /* start out in closed state */ + mbx->state = FM10K_STATE_CLOSED; + + /* validate layout of handlers before assigning them */ + if (fm10k_mbx_validate_handlers(msg_data)) + return FM10K_ERR_PARAM; + + /* initialize the message handlers */ + mbx->msg_data = msg_data; + + /* start mailbox as timed out and let the reset_hw call + * set the timeout value to begin communications + */ + mbx->timeout = 0; + mbx->udelay = FM10K_MBX_INIT_DELAY; + + /* initalize tail and head */ + mbx->tail = 1; + mbx->head = 1; + + /* initialize CRC seeds */ + mbx->local = FM10K_MBX_CRC_SEED; + mbx->remote = FM10K_MBX_CRC_SEED; + + /* Split buffer for use by Tx/Rx FIFOs */ + mbx->max_size = FM10K_MBX_MSG_MAX_SIZE; + mbx->mbmem_len = FM10K_VFMBMEM_VF_XOR; + + /* initialize the FIFOs, sizes are in 4 byte increments */ + fm10k_fifo_init(&mbx->tx, mbx->buffer, FM10K_MBX_TX_BUFFER_SIZE); + fm10k_fifo_init(&mbx->rx, &mbx->buffer[FM10K_MBX_TX_BUFFER_SIZE], + FM10K_MBX_RX_BUFFER_SIZE); + + /* initialize function pointers */ + mbx->ops.connect = fm10k_mbx_connect; + mbx->ops.disconnect = fm10k_mbx_disconnect; + mbx->ops.rx_ready = fm10k_mbx_rx_ready; + mbx->ops.tx_ready = fm10k_mbx_tx_ready; + mbx->ops.tx_complete = fm10k_mbx_tx_complete; + mbx->ops.enqueue_tx = fm10k_mbx_enqueue_tx; + mbx->ops.process = fm10k_mbx_process; + mbx->ops.register_handlers = fm10k_mbx_register_handlers; + + return 0; +} + +/** + * fm10k_sm_mbx_create_data_hdr - Generate a mailbox header for local FIFO + * @mbx: pointer to mailbox + * + * This function returns a connection mailbox header + **/ +static void fm10k_sm_mbx_create_data_hdr(struct fm10k_mbx_info *mbx) +{ + if (mbx->tail_len) + mbx->mbx_lock |= FM10K_MBX_REQ; + + mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(mbx->tail, SM_TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->remote, SM_VER) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, SM_HEAD); +} + +/** + * fm10k_sm_mbx_create_connect_hdr - Generate a mailbox header for local FIFO + * @mbx: pointer to mailbox + * @err: error flags to report if any + * + * This function returns a connection mailbox header + **/ +static void fm10k_sm_mbx_create_connect_hdr(struct fm10k_mbx_info *mbx, u8 err) +{ + if (mbx->local) + mbx->mbx_lock |= FM10K_MBX_REQ; + + mbx->mbx_hdr = FM10K_MSG_HDR_FIELD_SET(mbx->tail, SM_TAIL) | + FM10K_MSG_HDR_FIELD_SET(mbx->remote, SM_VER) | + FM10K_MSG_HDR_FIELD_SET(mbx->head, SM_HEAD) | + FM10K_MSG_HDR_FIELD_SET(err, SM_ERR); +} + +/** + * fm10k_sm_mbx_connect_reset - Reset following request for reset + * @mbx: pointer to mailbox + * + * This function resets the mailbox to a just connected state + **/ +static void fm10k_sm_mbx_connect_reset(struct fm10k_mbx_info *mbx) +{ + /* flush any uncompleted work */ + fm10k_mbx_reset_work(mbx); + + /* set local version to max and remote version to 0 */ + mbx->local = FM10K_SM_MBX_VERSION; + mbx->remote = 0; + + /* initalize tail and head */ + mbx->tail = 1; + mbx->head = 1; + + /* reset state back to connect */ + mbx->state = FM10K_STATE_CONNECT; +} + +/** + * fm10k_sm_mbx_connect - Start switch manager mailbox connection + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will initiate a mailbox connection with the switch + * manager. To do this it will first disconnect the mailbox, and then + * reconnect it in order to complete a reset of the mailbox. + * + * This function will return an error if the mailbox has not been initiated + * or is currently in use. + **/ +static s32 fm10k_sm_mbx_connect(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx) +{ + /* we cannot connect an uninitialized mailbox */ + if (!mbx->rx.buffer) + return FM10K_MBX_ERR_NO_SPACE; + + /* we cannot connect an already connected mailbox */ + if (mbx->state != FM10K_STATE_CLOSED) + return FM10K_MBX_ERR_BUSY; + + /* mailbox timeout can now become active */ + mbx->timeout = FM10K_MBX_INIT_TIMEOUT; + + /* Place mbx in ready to connect state */ + mbx->state = FM10K_STATE_CONNECT; + mbx->max_size = FM10K_MBX_MSG_MAX_SIZE; + + /* reset interface back to connect */ + fm10k_sm_mbx_connect_reset(mbx); + + /* enable interrupt and notify other party of new message */ + mbx->mbx_lock = FM10K_MBX_REQ_INTERRUPT | FM10K_MBX_ACK_INTERRUPT | + FM10K_MBX_INTERRUPT_ENABLE; + + /* generate and load connect header into mailbox */ + fm10k_sm_mbx_create_connect_hdr(mbx, 0); + fm10k_mbx_write(hw, mbx); + + /* enable interrupt and notify other party of new message */ + + return 0; +} + +/** + * fm10k_sm_mbx_disconnect - Shutdown mailbox connection + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will shut down the mailbox. It places the mailbox first + * in the disconnect state, it then allows up to a predefined timeout for + * the mailbox to transition to close on its own. If this does not occur + * then the mailbox will be forced into the closed state. + * + * Any mailbox transactions not completed before calling this function + * are not guaranteed to complete and may be dropped. + **/ +static void fm10k_sm_mbx_disconnect(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + int timeout = mbx->timeout ? FM10K_MBX_DISCONNECT_TIMEOUT : 0; + + /* Place mbx in ready to disconnect state */ + mbx->state = FM10K_STATE_DISCONNECT; + + /* trigger interrupt to start shutdown process */ + fm10k_write_reg(hw, mbx->mbx_reg, FM10K_MBX_REQ | + FM10K_MBX_INTERRUPT_DISABLE); + do { + udelay(FM10K_MBX_POLL_DELAY); + mbx->ops.process(hw, mbx); + timeout -= FM10K_MBX_POLL_DELAY; + } while ((timeout > 0) && (mbx->state != FM10K_STATE_CLOSED)); + + /* in case we didn't close just force the mailbox into shutdown */ + mbx->state = FM10K_STATE_CLOSED; + mbx->remote = 0; + fm10k_mbx_reset_work(mbx); + fm10k_mbx_update_max_size(mbx, 0); + + fm10k_write_reg(hw, mbx->mbmem_reg, 0); +} + +/** + * fm10k_mbx_validate_fifo_hdr - Validate fields in the remote FIFO header + * @mbx: pointer to mailbox + * + * This function will parse up the fields in the mailbox header and return + * an error if the header contains any of a number of invalid configurations + * including unrecognized offsets or version numbers. + **/ +static s32 fm10k_sm_mbx_validate_fifo_hdr(struct fm10k_mbx_info *mbx) +{ + const u32 *hdr = &mbx->mbx_hdr; + u16 tail, head, ver; + + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_TAIL); + ver = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_VER); + head = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_HEAD); + + switch (ver) { + case 0: + break; + case FM10K_SM_MBX_VERSION: + if (!head || head > FM10K_SM_MBX_FIFO_LEN) + return FM10K_MBX_ERR_HEAD; + if (!tail || tail > FM10K_SM_MBX_FIFO_LEN) + return FM10K_MBX_ERR_TAIL; + if (mbx->tail < head) + head += mbx->mbmem_len - 1; + if (tail < mbx->head) + tail += mbx->mbmem_len - 1; + if (fm10k_mbx_index_len(mbx, head, mbx->tail) > mbx->tail_len) + return FM10K_MBX_ERR_HEAD; + if (fm10k_mbx_index_len(mbx, mbx->head, tail) < mbx->mbmem_len) + break; + return FM10K_MBX_ERR_TAIL; + default: + return FM10K_MBX_ERR_SRC; + } + + return 0; +} + +/** + * fm10k_sm_mbx_process_error - Process header with error flag set + * @mbx: pointer to mailbox + * + * This function is meant to respond to a request where the error flag + * is set. As a result we will terminate a connection if one is present + * and fall back into the reset state with a connection header of version + * 0 (RESET). + **/ +static void fm10k_sm_mbx_process_error(struct fm10k_mbx_info *mbx) +{ + const enum fm10k_mbx_state state = mbx->state; + + switch (state) { + case FM10K_STATE_DISCONNECT: + /* if there is an error just disconnect */ + mbx->remote = 0; + break; + case FM10K_STATE_OPEN: + /* flush any uncompleted work */ + fm10k_sm_mbx_connect_reset(mbx); + break; + case FM10K_STATE_CONNECT: + /* try connnecting at lower version */ + if (mbx->remote) { + while (mbx->local > 1) + mbx->local--; + mbx->remote = 0; + } + break; + default: + break; + } + + fm10k_sm_mbx_create_connect_hdr(mbx, 0); +} + +/** + * fm10k_sm_mbx_create_error_message - Process an error in FIFO hdr + * @mbx: pointer to mailbox + * @err: local error encountered + * + * This function will interpret the error provided by err, and based on + * that it may set the error bit in the local message header + **/ +static void fm10k_sm_mbx_create_error_msg(struct fm10k_mbx_info *mbx, s32 err) +{ + /* only generate an error message for these types */ + switch (err) { + case FM10K_MBX_ERR_TAIL: + case FM10K_MBX_ERR_HEAD: + case FM10K_MBX_ERR_SRC: + case FM10K_MBX_ERR_SIZE: + case FM10K_MBX_ERR_RSVD0: + break; + default: + return; + } + + /* process it as though we received an error, and send error reply */ + fm10k_sm_mbx_process_error(mbx); + fm10k_sm_mbx_create_connect_hdr(mbx, 1); +} + +/** + * fm10k_sm_mbx_receive - Take message from Rx mailbox FIFO and put it in Rx + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will dequeue one message from the Rx switch manager mailbox + * FIFO and place it in the Rx mailbox FIFO for processing by software. + **/ +static s32 fm10k_sm_mbx_receive(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, + u16 tail) +{ + /* reduce length by 1 to convert to a mask */ + u16 mbmem_len = mbx->mbmem_len - 1; + s32 err; + + /* push tail in front of head */ + if (tail < mbx->head) + tail += mbmem_len; + + /* copy data to the Rx FIFO */ + err = fm10k_mbx_push_tail(hw, mbx, tail); + if (err < 0) + return err; + + /* process messages if we have received any */ + fm10k_mbx_dequeue_rx(hw, mbx); + + /* guarantee head aligns with the end of the last message */ + mbx->head = fm10k_mbx_head_sub(mbx, mbx->pushed); + mbx->pushed = 0; + + /* clear any extra bits left over since index adds 1 extra bit */ + if (mbx->head > mbmem_len) + mbx->head -= mbmem_len; + + return err; +} + +/** + * fm10k_sm_mbx_transmit - Take message from Tx and put it in Tx mailbox FIFO + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will dequeue one message from the Tx mailbox FIFO and place + * it in the Tx switch manager mailbox FIFO for processing by hardware. + **/ +static void fm10k_sm_mbx_transmit(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, u16 head) +{ + struct fm10k_mbx_fifo *fifo = &mbx->tx; + /* reduce length by 1 to convert to a mask */ + u16 mbmem_len = mbx->mbmem_len - 1; + u16 tail_len, len = 0; + u32 *msg; + + /* push head behind tail */ + if (mbx->tail < head) + head += mbmem_len; + + fm10k_mbx_pull_head(hw, mbx, head); + + /* determine msg aligned offset for end of buffer */ + do { + msg = fifo->buffer + fm10k_fifo_head_offset(fifo, len); + tail_len = len; + len += FM10K_TLV_DWORD_LEN(*msg); + } while ((len <= mbx->tail_len) && (len < mbmem_len)); + + /* guarantee we stop on a message boundary */ + if (mbx->tail_len > tail_len) { + mbx->tail = fm10k_mbx_tail_sub(mbx, mbx->tail_len - tail_len); + mbx->tail_len = tail_len; + } + + /* clear any extra bits left over since index adds 1 extra bit */ + if (mbx->tail > mbmem_len) + mbx->tail -= mbmem_len; +} + +/** + * fm10k_sm_mbx_create_reply - Generate reply based on state and remote head + * @mbx: pointer to mailbox + * @head: acknowledgement number + * + * This function will generate an outgoing message based on the current + * mailbox state and the remote fifo head. It will return the length + * of the outgoing message excluding header on success, and a negative value + * on error. + **/ +static void fm10k_sm_mbx_create_reply(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx, u16 head) +{ + switch (mbx->state) { + case FM10K_STATE_OPEN: + case FM10K_STATE_DISCONNECT: + /* flush out Tx data */ + fm10k_sm_mbx_transmit(hw, mbx, head); + + /* generate new header based on data */ + if (mbx->tail_len || (mbx->state == FM10K_STATE_OPEN)) { + fm10k_sm_mbx_create_data_hdr(mbx); + } else { + mbx->remote = 0; + fm10k_sm_mbx_create_connect_hdr(mbx, 0); + } + break; + case FM10K_STATE_CONNECT: + case FM10K_STATE_CLOSED: + fm10k_sm_mbx_create_connect_hdr(mbx, 0); + break; + default: + break; + } +} + +/** + * fm10k_sm_mbx_process_reset - Process header with version == 0 (RESET) + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function is meant to respond to a request where the version data + * is set to 0. As such we will either terminate the connection or go + * into the connect state in order to re-establish the connection. This + * function can also be used to respond to an error as the connection + * resetting would also be a means of dealing with errors. + **/ +static void fm10k_sm_mbx_process_reset(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const enum fm10k_mbx_state state = mbx->state; + + switch (state) { + case FM10K_STATE_DISCONNECT: + /* drop remote connections and disconnect */ + mbx->state = FM10K_STATE_CLOSED; + mbx->remote = 0; + mbx->local = 0; + break; + case FM10K_STATE_OPEN: + /* flush any incomplete work */ + fm10k_sm_mbx_connect_reset(mbx); + break; + case FM10K_STATE_CONNECT: + /* Update remote value to match local value */ + mbx->remote = mbx->local; + default: + break; + } + + fm10k_sm_mbx_create_reply(hw, mbx, mbx->tail); +} + +/** + * fm10k_sm_mbx_process_version_1 - Process header with version == 1 + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function is meant to process messages received when the remote + * mailbox is active. + **/ +static s32 fm10k_sm_mbx_process_version_1(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + const u32 *hdr = &mbx->mbx_hdr; + u16 head, tail; + s32 len; + + /* pull all fields needed for verification */ + tail = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_TAIL); + head = FM10K_MSG_HDR_FIELD_GET(*hdr, SM_HEAD); + + /* if we are in connect and wanting version 1 then start up and go */ + if (mbx->state == FM10K_STATE_CONNECT) { + if (!mbx->remote) + goto send_reply; + if (mbx->remote != 1) + return FM10K_MBX_ERR_SRC; + + mbx->state = FM10K_STATE_OPEN; + } + + do { + /* abort on message size errors */ + len = fm10k_sm_mbx_receive(hw, mbx, tail); + if (len < 0) + return len; + + /* continue until we have flushed the Rx FIFO */ + } while (len); + +send_reply: + fm10k_sm_mbx_create_reply(hw, mbx, head); + + return 0; +} + +/** + * fm10k_sm_mbx_process - Process mailbox switch mailbox interrupt + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * + * This function will process incoming mailbox events and generate mailbox + * replies. It will return a value indicating the number of DWORDs + * transmitted excluding header on success or a negative value on error. + **/ +static s32 fm10k_sm_mbx_process(struct fm10k_hw *hw, + struct fm10k_mbx_info *mbx) +{ + s32 err; + + /* we do not read mailbox if closed */ + if (mbx->state == FM10K_STATE_CLOSED) + return 0; + + /* retrieve data from switch manager */ + err = fm10k_mbx_read(hw, mbx); + if (err) + return err; + + err = fm10k_sm_mbx_validate_fifo_hdr(mbx); + if (err < 0) + goto fifo_err; + + if (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, SM_ERR)) { + fm10k_sm_mbx_process_error(mbx); + goto fifo_err; + } + + switch (FM10K_MSG_HDR_FIELD_GET(mbx->mbx_hdr, SM_VER)) { + case 0: + fm10k_sm_mbx_process_reset(hw, mbx); + break; + case FM10K_SM_MBX_VERSION: + err = fm10k_sm_mbx_process_version_1(hw, mbx); + break; + } + +fifo_err: + if (err < 0) + fm10k_sm_mbx_create_error_msg(mbx, err); + + /* report data to switch manager */ + fm10k_mbx_write(hw, mbx); + + return err; +} + +/** + * fm10k_sm_mbx_init - Initialize mailbox memory for PF/SM mailbox + * @hw: pointer to hardware structure + * @mbx: pointer to mailbox + * @msg_data: handlers for mailbox events + * + * This function for now is used to stub out the PF/SM mailbox + **/ +s32 fm10k_sm_mbx_init(struct fm10k_hw *hw, struct fm10k_mbx_info *mbx, + const struct fm10k_msg_data *msg_data) +{ + mbx->mbx_reg = FM10K_GMBX; + mbx->mbmem_reg = FM10K_MBMEM_PF(0); + /* start out in closed state */ + mbx->state = FM10K_STATE_CLOSED; + + /* validate layout of handlers before assigning them */ + if (fm10k_mbx_validate_handlers(msg_data)) + return FM10K_ERR_PARAM; + + /* initialize the message handlers */ + mbx->msg_data = msg_data; + + /* start mailbox as timed out and let the reset_hw call + * set the timeout value to begin communications + */ + mbx->timeout = 0; + mbx->udelay = FM10K_MBX_INIT_DELAY; + + /* Split buffer for use by Tx/Rx FIFOs */ + mbx->max_size = FM10K_MBX_MSG_MAX_SIZE; + mbx->mbmem_len = FM10K_MBMEM_PF_XOR; + + /* initialize the FIFOs, sizes are in 4 byte increments */ + fm10k_fifo_init(&mbx->tx, mbx->buffer, FM10K_MBX_TX_BUFFER_SIZE); + fm10k_fifo_init(&mbx->rx, &mbx->buffer[FM10K_MBX_TX_BUFFER_SIZE], + FM10K_MBX_RX_BUFFER_SIZE); + + /* initialize function pointers */ + mbx->ops.connect = fm10k_sm_mbx_connect; + mbx->ops.disconnect = fm10k_sm_mbx_disconnect; + mbx->ops.rx_ready = fm10k_mbx_rx_ready; + mbx->ops.tx_ready = fm10k_mbx_tx_ready; + mbx->ops.tx_complete = fm10k_mbx_tx_complete; + mbx->ops.enqueue_tx = fm10k_mbx_enqueue_tx; + mbx->ops.process = fm10k_sm_mbx_process; + mbx->ops.register_handlers = fm10k_mbx_register_handlers; + + return 0; +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h new file mode 100644 index 00000000000..0419a7f0035 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_mbx.h @@ -0,0 +1,307 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#ifndef _FM10K_MBX_H_ +#define _FM10K_MBX_H_ + +/* forward declaration */ +struct fm10k_mbx_info; + +#include "fm10k_type.h" +#include "fm10k_tlv.h" + +/* PF Mailbox Registers */ +#define FM10K_MBMEM(_n) ((_n) + 0x18000) +#define FM10K_MBMEM_VF(_n, _m) (((_n) * 0x10) + (_m) + 0x18000) +#define FM10K_MBMEM_SM(_n) ((_n) + 0x18400) +#define FM10K_MBMEM_PF(_n) ((_n) + 0x18600) +/* XOR provides means of switching from Tx to Rx FIFO */ +#define FM10K_MBMEM_PF_XOR (FM10K_MBMEM_SM(0) ^ FM10K_MBMEM_PF(0)) +#define FM10K_MBX(_n) ((_n) + 0x18800) +#define FM10K_MBX_REQ 0x00000002 +#define FM10K_MBX_ACK 0x00000004 +#define FM10K_MBX_REQ_INTERRUPT 0x00000008 +#define FM10K_MBX_ACK_INTERRUPT 0x00000010 +#define FM10K_MBX_INTERRUPT_ENABLE 0x00000020 +#define FM10K_MBX_INTERRUPT_DISABLE 0x00000040 +#define FM10K_MBICR(_n) ((_n) + 0x18840) +#define FM10K_GMBX 0x18842 + +/* VF Mailbox Registers */ +#define FM10K_VFMBX 0x00010 +#define FM10K_VFMBMEM(_n) ((_n) + 0x00020) +#define FM10K_VFMBMEM_LEN 16 +#define FM10K_VFMBMEM_VF_XOR (FM10K_VFMBMEM_LEN / 2) + +/* Delays/timeouts */ +#define FM10K_MBX_DISCONNECT_TIMEOUT 500 +#define FM10K_MBX_POLL_DELAY 19 +#define FM10K_MBX_INT_DELAY 20 + +/* PF/VF Mailbox state machine + * + * +----------+ connect() +----------+ + * | CLOSED | --------------> | CONNECT | + * +----------+ +----------+ + * ^ ^ | + * | rcv: rcv: | | rcv: + * | Connect Disconnect | | Connect + * | Disconnect Error | | Data + * | | | + * | | V + * +----------+ disconnect() +----------+ + * |DISCONNECT| <-------------- | OPEN | + * +----------+ +----------+ + * + * The diagram above describes the PF/VF mailbox state machine. There + * are four main states to this machine. + * Closed: This state represents a mailbox that is in a standby state + * with interrupts disabled. In this state the mailbox should not + * read the mailbox or write any data. The only means of exiting + * this state is for the system to make the connect() call for the + * mailbox, it will then transition to the connect state. + * Connect: In this state the mailbox is seeking a connection. It will + * post a connect message with no specified destination and will + * wait for a reply from the other side of the mailbox. This state + * is exited when either a connect with the local mailbox as the + * destination is received or when a data message is received with + * a valid sequence number. + * Open: In this state the mailbox is able to transfer data between the local + * entity and the remote. It will fall back to connect in the event of + * receiving either an error message, or a disconnect message. It will + * transition to disconnect on a call to disconnect(); + * Disconnect: In this state the mailbox is attempting to gracefully terminate + * the connection. It will do so at the first point where it knows + * that the remote endpoint is either done sending, or when the + * remote endpoint has fallen back into connect. + */ +enum fm10k_mbx_state { + FM10K_STATE_CLOSED, + FM10K_STATE_CONNECT, + FM10K_STATE_OPEN, + FM10K_STATE_DISCONNECT, +}; + +/* PF/VF Mailbox header format + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | Size/Err_no/CRC | Rsvd0 | Head | Tail | Type | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * The layout above describes the format for the header used in the PF/VF + * mailbox. The header is broken out into the following fields: + * Type: There are 4 supported message types + * 0x8: Data header - used to transport message data + * 0xC: Connect header - used to establish connection + * 0xD: Disconnect header - used to tear down a connection + * 0xE: Error header - used to address message exceptions + * Tail: Tail index for local FIFO + * Tail index actually consists of two parts. The MSB of + * the head is a loop tracker, it is 0 on an even numbered + * loop through the FIFO, and 1 on the odd numbered loops. + * To get the actual mailbox offset based on the tail it + * is necessary to add bit 3 to bit 0 and clear bit 3. This + * gives us a valid range of 0x1 - 0xE. + * Head: Head index for remote FIFO + * Head index follows the same format as the tail index. + * Rsvd0: Reserved 0 portion of the mailbox header + * CRC: Running CRC for all data since connect plus current message header + * Size: Maximum message size - Applies only to connect headers + * The maximum message size is provided during connect to avoid + * jamming the mailbox with messages that do not fit. + * Err_no: Error number - Applies only to error headers + * The error number provides a indication of the type of error + * experienced. + */ + +/* macros for retriving and setting header values */ +#define FM10K_MSG_HDR_MASK(name) \ + ((0x1u << FM10K_MSG_##name##_SIZE) - 1) +#define FM10K_MSG_HDR_FIELD_SET(value, name) \ + (((u32)(value) & FM10K_MSG_HDR_MASK(name)) << FM10K_MSG_##name##_SHIFT) +#define FM10K_MSG_HDR_FIELD_GET(value, name) \ + ((u16)((value) >> FM10K_MSG_##name##_SHIFT) & FM10K_MSG_HDR_MASK(name)) + +/* offsets shared between all headers */ +#define FM10K_MSG_TYPE_SHIFT 0 +#define FM10K_MSG_TYPE_SIZE 4 +#define FM10K_MSG_TAIL_SHIFT 4 +#define FM10K_MSG_TAIL_SIZE 4 +#define FM10K_MSG_HEAD_SHIFT 8 +#define FM10K_MSG_HEAD_SIZE 4 +#define FM10K_MSG_RSVD0_SHIFT 12 +#define FM10K_MSG_RSVD0_SIZE 4 + +/* offsets for data/disconnect headers */ +#define FM10K_MSG_CRC_SHIFT 16 +#define FM10K_MSG_CRC_SIZE 16 + +/* offsets for connect headers */ +#define FM10K_MSG_CONNECT_SIZE_SHIFT 16 +#define FM10K_MSG_CONNECT_SIZE_SIZE 16 + +/* offsets for error headers */ +#define FM10K_MSG_ERR_NO_SHIFT 16 +#define FM10K_MSG_ERR_NO_SIZE 16 + +enum fm10k_msg_type { + FM10K_MSG_DATA = 0x8, + FM10K_MSG_CONNECT = 0xC, + FM10K_MSG_DISCONNECT = 0xD, + FM10K_MSG_ERROR = 0xE, +}; + +/* HNI/SM Mailbox FIFO format + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------+-----------------------+-------+-----------------------+ + * | Error | Remote Head |Version| Local Tail | + * +-------+-----------------------+-------+-----------------------+ + * | | + * . Local FIFO Data . + * . . + * +-------+-----------------------+-------+-----------------------+ + * + * The layout above describes the format for the FIFOs used by the host + * network interface and the switch manager to communicate messages back + * and forth. Both the HNI and the switch maintain one such FIFO. The + * layout in memory has the switch manager FIFO followed immediately by + * the HNI FIFO. For this reason I am using just the pointer to the + * HNI FIFO in the mailbox ops as the offset between the two is fixed. + * + * The header for the FIFO is broken out into the following fields: + * Local Tail: Offset into FIFO region for next DWORD to write. + * Version: Version info for mailbox, only values of 0/1 are supported. + * Remote Head: Offset into remote FIFO to indicate how much we have read. + * Error: Error indication, values TBD. + */ + +/* version number for switch manager mailboxes */ +#define FM10K_SM_MBX_VERSION 1 +#define FM10K_SM_MBX_FIFO_LEN (FM10K_MBMEM_PF_XOR - 1) + +/* offsets shared between all SM FIFO headers */ +#define FM10K_MSG_SM_TAIL_SHIFT 0 +#define FM10K_MSG_SM_TAIL_SIZE 12 +#define FM10K_MSG_SM_VER_SHIFT 12 +#define FM10K_MSG_SM_VER_SIZE 4 +#define FM10K_MSG_SM_HEAD_SHIFT 16 +#define FM10K_MSG_SM_HEAD_SIZE 12 +#define FM10K_MSG_SM_ERR_SHIFT 28 +#define FM10K_MSG_SM_ERR_SIZE 4 + +/* All error messages returned by mailbox functions + * The value -511 is 0xFE01 in hex. The idea is to order the errors + * from 0xFE01 - 0xFEFF so error codes are easily visible in the mailbox + * messages. This also helps to avoid error number collisions as Linux + * doesn't appear to use error numbers 256 - 511. + */ +#define FM10K_MBX_ERR(_n) ((_n) - 512) +#define FM10K_MBX_ERR_NO_MBX FM10K_MBX_ERR(0x01) +#define FM10K_MBX_ERR_NO_SPACE FM10K_MBX_ERR(0x03) +#define FM10K_MBX_ERR_TAIL FM10K_MBX_ERR(0x05) +#define FM10K_MBX_ERR_HEAD FM10K_MBX_ERR(0x06) +#define FM10K_MBX_ERR_SRC FM10K_MBX_ERR(0x08) +#define FM10K_MBX_ERR_TYPE FM10K_MBX_ERR(0x09) +#define FM10K_MBX_ERR_SIZE FM10K_MBX_ERR(0x0B) +#define FM10K_MBX_ERR_BUSY FM10K_MBX_ERR(0x0C) +#define FM10K_MBX_ERR_RSVD0 FM10K_MBX_ERR(0x0E) +#define FM10K_MBX_ERR_CRC FM10K_MBX_ERR(0x0F) + +#define FM10K_MBX_CRC_SEED 0xFFFF + +struct fm10k_mbx_ops { + s32 (*connect)(struct fm10k_hw *, struct fm10k_mbx_info *); + void (*disconnect)(struct fm10k_hw *, struct fm10k_mbx_info *); + bool (*rx_ready)(struct fm10k_mbx_info *); + bool (*tx_ready)(struct fm10k_mbx_info *, u16); + bool (*tx_complete)(struct fm10k_mbx_info *); + s32 (*enqueue_tx)(struct fm10k_hw *, struct fm10k_mbx_info *, + const u32 *); + s32 (*process)(struct fm10k_hw *, struct fm10k_mbx_info *); + s32 (*register_handlers)(struct fm10k_mbx_info *, + const struct fm10k_msg_data *); +}; + +struct fm10k_mbx_fifo { + u32 *buffer; + u16 head; + u16 tail; + u16 size; +}; + +/* size of buffer to be stored in mailbox for FIFOs */ +#define FM10K_MBX_TX_BUFFER_SIZE 512 +#define FM10K_MBX_RX_BUFFER_SIZE 128 +#define FM10K_MBX_BUFFER_SIZE \ + (FM10K_MBX_TX_BUFFER_SIZE + FM10K_MBX_RX_BUFFER_SIZE) + +/* minimum and maximum message size in dwords */ +#define FM10K_MBX_MSG_MAX_SIZE \ + ((FM10K_MBX_TX_BUFFER_SIZE - 1) & (FM10K_MBX_RX_BUFFER_SIZE - 1)) +#define FM10K_VFMBX_MSG_MTU ((FM10K_VFMBMEM_LEN / 2) - 1) + +#define FM10K_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ +#define FM10K_MBX_INIT_DELAY 500 /* microseconds between retries */ + +struct fm10k_mbx_info { + /* function pointers for mailbox operations */ + struct fm10k_mbx_ops ops; + const struct fm10k_msg_data *msg_data; + + /* message FIFOs */ + struct fm10k_mbx_fifo rx; + struct fm10k_mbx_fifo tx; + + /* delay for handling timeouts */ + u32 timeout; + u32 udelay; + + /* mailbox state info */ + u32 mbx_reg, mbmem_reg, mbx_lock, mbx_hdr; + u16 max_size, mbmem_len; + u16 tail, tail_len, pulled; + u16 head, head_len, pushed; + u16 local, remote; + enum fm10k_mbx_state state; + + /* result of last mailbox test */ + s32 test_result; + + /* statistics */ + u64 tx_busy; + u64 tx_dropped; + u64 tx_messages; + u64 tx_dwords; + u64 rx_messages; + u64 rx_dwords; + u64 rx_parse_err; + + /* Buffer to store messages */ + u32 buffer[FM10K_MBX_BUFFER_SIZE]; +}; + +s32 fm10k_pfvf_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *, + const struct fm10k_msg_data *, u8); +s32 fm10k_sm_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *, + const struct fm10k_msg_data *); + +#endif /* _FM10K_MBX_H_ */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c new file mode 100644 index 00000000000..bf44a8fe711 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_netdev.c @@ -0,0 +1,1435 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k.h" +#include <linux/vmalloc.h> +#if IS_ENABLED(CONFIG_VXLAN) +#include <net/vxlan.h> +#endif /* CONFIG_VXLAN */ + +/** + * fm10k_setup_tx_resources - allocate Tx resources (Descriptors) + * @tx_ring: tx descriptor ring (for a specific queue) to setup + * + * Return 0 on success, negative on failure + **/ +int fm10k_setup_tx_resources(struct fm10k_ring *tx_ring) +{ + struct device *dev = tx_ring->dev; + int size; + + size = sizeof(struct fm10k_tx_buffer) * tx_ring->count; + + tx_ring->tx_buffer = vzalloc(size); + if (!tx_ring->tx_buffer) + goto err; + + u64_stats_init(&tx_ring->syncp); + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(struct fm10k_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + + tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, + &tx_ring->dma, GFP_KERNEL); + if (!tx_ring->desc) + goto err; + + return 0; + +err: + vfree(tx_ring->tx_buffer); + tx_ring->tx_buffer = NULL; + return -ENOMEM; +} + +/** + * fm10k_setup_all_tx_resources - allocate all queues Tx resources + * @interface: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ +static int fm10k_setup_all_tx_resources(struct fm10k_intfc *interface) +{ + int i, err = 0; + + for (i = 0; i < interface->num_tx_queues; i++) { + err = fm10k_setup_tx_resources(interface->tx_ring[i]); + if (!err) + continue; + + netif_err(interface, probe, interface->netdev, + "Allocation for Tx Queue %u failed\n", i); + goto err_setup_tx; + } + + return 0; +err_setup_tx: + /* rewind the index freeing the rings as we go */ + while (i--) + fm10k_free_tx_resources(interface->tx_ring[i]); + return err; +} + +/** + * fm10k_setup_rx_resources - allocate Rx resources (Descriptors) + * @rx_ring: rx descriptor ring (for a specific queue) to setup + * + * Returns 0 on success, negative on failure + **/ +int fm10k_setup_rx_resources(struct fm10k_ring *rx_ring) +{ + struct device *dev = rx_ring->dev; + int size; + + size = sizeof(struct fm10k_rx_buffer) * rx_ring->count; + + rx_ring->rx_buffer = vzalloc(size); + if (!rx_ring->rx_buffer) + goto err; + + u64_stats_init(&rx_ring->syncp); + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * sizeof(union fm10k_rx_desc); + rx_ring->size = ALIGN(rx_ring->size, 4096); + + rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); + if (!rx_ring->desc) + goto err; + + return 0; +err: + vfree(rx_ring->rx_buffer); + rx_ring->rx_buffer = NULL; + return -ENOMEM; +} + +/** + * fm10k_setup_all_rx_resources - allocate all queues Rx resources + * @interface: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ +static int fm10k_setup_all_rx_resources(struct fm10k_intfc *interface) +{ + int i, err = 0; + + for (i = 0; i < interface->num_rx_queues; i++) { + err = fm10k_setup_rx_resources(interface->rx_ring[i]); + if (!err) + continue; + + netif_err(interface, probe, interface->netdev, + "Allocation for Rx Queue %u failed\n", i); + goto err_setup_rx; + } + + return 0; +err_setup_rx: + /* rewind the index freeing the rings as we go */ + while (i--) + fm10k_free_rx_resources(interface->rx_ring[i]); + return err; +} + +void fm10k_unmap_and_free_tx_resource(struct fm10k_ring *ring, + struct fm10k_tx_buffer *tx_buffer) +{ + if (tx_buffer->skb) { + dev_kfree_skb_any(tx_buffer->skb); + if (dma_unmap_len(tx_buffer, len)) + dma_unmap_single(ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + } else if (dma_unmap_len(tx_buffer, len)) { + dma_unmap_page(ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + } + tx_buffer->next_to_watch = NULL; + tx_buffer->skb = NULL; + dma_unmap_len_set(tx_buffer, len, 0); + /* tx_buffer must be completely set up in the transmit path */ +} + +/** + * fm10k_clean_tx_ring - Free Tx Buffers + * @tx_ring: ring to be cleaned + **/ +static void fm10k_clean_tx_ring(struct fm10k_ring *tx_ring) +{ + struct fm10k_tx_buffer *tx_buffer; + unsigned long size; + u16 i; + + /* ring already cleared, nothing to do */ + if (!tx_ring->tx_buffer) + return; + + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tx_ring->count; i++) { + tx_buffer = &tx_ring->tx_buffer[i]; + fm10k_unmap_and_free_tx_resource(tx_ring, tx_buffer); + } + + /* reset BQL values */ + netdev_tx_reset_queue(txring_txq(tx_ring)); + + size = sizeof(struct fm10k_tx_buffer) * tx_ring->count; + memset(tx_ring->tx_buffer, 0, size); + + /* Zero out the descriptor ring */ + memset(tx_ring->desc, 0, tx_ring->size); +} + +/** + * fm10k_free_tx_resources - Free Tx Resources per Queue + * @tx_ring: Tx descriptor ring for a specific queue + * + * Free all transmit software resources + **/ +void fm10k_free_tx_resources(struct fm10k_ring *tx_ring) +{ + fm10k_clean_tx_ring(tx_ring); + + vfree(tx_ring->tx_buffer); + tx_ring->tx_buffer = NULL; + + /* if not set, then don't free */ + if (!tx_ring->desc) + return; + + dma_free_coherent(tx_ring->dev, tx_ring->size, + tx_ring->desc, tx_ring->dma); + tx_ring->desc = NULL; +} + +/** + * fm10k_clean_all_tx_rings - Free Tx Buffers for all queues + * @interface: board private structure + **/ +void fm10k_clean_all_tx_rings(struct fm10k_intfc *interface) +{ + int i; + + for (i = 0; i < interface->num_tx_queues; i++) + fm10k_clean_tx_ring(interface->tx_ring[i]); + + /* remove any stale timestamp buffers and free them */ + skb_queue_purge(&interface->ts_tx_skb_queue); +} + +/** + * fm10k_free_all_tx_resources - Free Tx Resources for All Queues + * @interface: board private structure + * + * Free all transmit software resources + **/ +static void fm10k_free_all_tx_resources(struct fm10k_intfc *interface) +{ + int i = interface->num_tx_queues; + + while (i--) + fm10k_free_tx_resources(interface->tx_ring[i]); +} + +/** + * fm10k_clean_rx_ring - Free Rx Buffers per Queue + * @rx_ring: ring to free buffers from + **/ +static void fm10k_clean_rx_ring(struct fm10k_ring *rx_ring) +{ + unsigned long size; + u16 i; + + if (!rx_ring->rx_buffer) + return; + + if (rx_ring->skb) + dev_kfree_skb(rx_ring->skb); + rx_ring->skb = NULL; + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + struct fm10k_rx_buffer *buffer = &rx_ring->rx_buffer[i]; + /* clean-up will only set page pointer to NULL */ + if (!buffer->page) + continue; + + dma_unmap_page(rx_ring->dev, buffer->dma, + PAGE_SIZE, DMA_FROM_DEVICE); + __free_page(buffer->page); + + buffer->page = NULL; + } + + size = sizeof(struct fm10k_rx_buffer) * rx_ring->count; + memset(rx_ring->rx_buffer, 0, size); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_alloc = 0; + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; +} + +/** + * fm10k_free_rx_resources - Free Rx Resources + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ +void fm10k_free_rx_resources(struct fm10k_ring *rx_ring) +{ + fm10k_clean_rx_ring(rx_ring); + + vfree(rx_ring->rx_buffer); + rx_ring->rx_buffer = NULL; + + /* if not set, then don't free */ + if (!rx_ring->desc) + return; + + dma_free_coherent(rx_ring->dev, rx_ring->size, + rx_ring->desc, rx_ring->dma); + + rx_ring->desc = NULL; +} + +/** + * fm10k_clean_all_rx_rings - Free Rx Buffers for all queues + * @interface: board private structure + **/ +void fm10k_clean_all_rx_rings(struct fm10k_intfc *interface) +{ + int i; + + for (i = 0; i < interface->num_rx_queues; i++) + fm10k_clean_rx_ring(interface->rx_ring[i]); +} + +/** + * fm10k_free_all_rx_resources - Free Rx Resources for All Queues + * @interface: board private structure + * + * Free all receive software resources + **/ +static void fm10k_free_all_rx_resources(struct fm10k_intfc *interface) +{ + int i = interface->num_rx_queues; + + while (i--) + fm10k_free_rx_resources(interface->rx_ring[i]); +} + +/** + * fm10k_request_glort_range - Request GLORTs for use in configuring rules + * @interface: board private structure + * + * This function allocates a range of glorts for this inteface to use. + **/ +static void fm10k_request_glort_range(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + u16 mask = (~hw->mac.dglort_map) >> FM10K_DGLORTMAP_MASK_SHIFT; + + /* establish GLORT base */ + interface->glort = hw->mac.dglort_map & FM10K_DGLORTMAP_NONE; + interface->glort_count = 0; + + /* nothing we can do until mask is allocated */ + if (hw->mac.dglort_map == FM10K_DGLORTMAP_NONE) + return; + + /* we support 3 possible GLORT configurations. + * 1: VFs consume all but the last 1 + * 2: VFs and PF split glorts with possible gap between + * 3: VFs allocated first 64, all others belong to PF + */ + if (mask <= hw->iov.total_vfs) { + interface->glort_count = 1; + interface->glort += mask; + } else if (mask < 64) { + interface->glort_count = (mask + 1) / 2; + interface->glort += interface->glort_count; + } else { + interface->glort_count = mask - 63; + interface->glort += 64; + } +} + +/** + * fm10k_del_vxlan_port_all + * @interface: board private structure + * + * This function frees the entire vxlan_port list + **/ +static void fm10k_del_vxlan_port_all(struct fm10k_intfc *interface) +{ + struct fm10k_vxlan_port *vxlan_port; + + /* flush all entries from list */ + vxlan_port = list_first_entry_or_null(&interface->vxlan_port, + struct fm10k_vxlan_port, list); + while (vxlan_port) { + list_del(&vxlan_port->list); + kfree(vxlan_port); + vxlan_port = list_first_entry_or_null(&interface->vxlan_port, + struct fm10k_vxlan_port, + list); + } +} + +/** + * fm10k_restore_vxlan_port + * @interface: board private structure + * + * This function restores the value in the tunnel_cfg register after reset + **/ +static void fm10k_restore_vxlan_port(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + struct fm10k_vxlan_port *vxlan_port; + + /* only the PF supports configuring tunnels */ + if (hw->mac.type != fm10k_mac_pf) + return; + + vxlan_port = list_first_entry_or_null(&interface->vxlan_port, + struct fm10k_vxlan_port, list); + + /* restore tunnel configuration register */ + fm10k_write_reg(hw, FM10K_TUNNEL_CFG, + (vxlan_port ? ntohs(vxlan_port->port) : 0) | + (ETH_P_TEB << FM10K_TUNNEL_CFG_NVGRE_SHIFT)); +} + +/** + * fm10k_add_vxlan_port + * @netdev: network interface device structure + * @sa_family: Address family of new port + * @port: port number used for VXLAN + * + * This funciton is called when a new VXLAN interface has added a new port + * number to the range that is currently in use for VXLAN. The new port + * number is always added to the tail so that the port number list should + * match the order in which the ports were allocated. The head of the list + * is always used as the VXLAN port number for offloads. + **/ +static void fm10k_add_vxlan_port(struct net_device *dev, + sa_family_t sa_family, __be16 port) { + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_vxlan_port *vxlan_port; + + /* only the PF supports configuring tunnels */ + if (interface->hw.mac.type != fm10k_mac_pf) + return; + + /* existing ports are pulled out so our new entry is always last */ + fm10k_vxlan_port_for_each(vxlan_port, interface) { + if ((vxlan_port->port == port) && + (vxlan_port->sa_family == sa_family)) { + list_del(&vxlan_port->list); + goto insert_tail; + } + } + + /* allocate memory to track ports */ + vxlan_port = kmalloc(sizeof(*vxlan_port), GFP_ATOMIC); + if (!vxlan_port) + return; + vxlan_port->port = port; + vxlan_port->sa_family = sa_family; + +insert_tail: + /* add new port value to list */ + list_add_tail(&vxlan_port->list, &interface->vxlan_port); + + fm10k_restore_vxlan_port(interface); +} + +/** + * fm10k_del_vxlan_port + * @netdev: network interface device structure + * @sa_family: Address family of freed port + * @port: port number used for VXLAN + * + * This funciton is called when a new VXLAN interface has freed a port + * number from the range that is currently in use for VXLAN. The freed + * port is removed from the list and the new head is used to determine + * the port number for offloads. + **/ +static void fm10k_del_vxlan_port(struct net_device *dev, + sa_family_t sa_family, __be16 port) { + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_vxlan_port *vxlan_port; + + if (interface->hw.mac.type != fm10k_mac_pf) + return; + + /* find the port in the list and free it */ + fm10k_vxlan_port_for_each(vxlan_port, interface) { + if ((vxlan_port->port == port) && + (vxlan_port->sa_family == sa_family)) { + list_del(&vxlan_port->list); + kfree(vxlan_port); + break; + } + } + + fm10k_restore_vxlan_port(interface); +} + +/** + * fm10k_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +int fm10k_open(struct net_device *netdev) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + int err; + + /* allocate transmit descriptors */ + err = fm10k_setup_all_tx_resources(interface); + if (err) + goto err_setup_tx; + + /* allocate receive descriptors */ + err = fm10k_setup_all_rx_resources(interface); + if (err) + goto err_setup_rx; + + /* allocate interrupt resources */ + err = fm10k_qv_request_irq(interface); + if (err) + goto err_req_irq; + + /* setup GLORT assignment for this port */ + fm10k_request_glort_range(interface); + + /* Notify the stack of the actual queue counts */ + err = netif_set_real_num_tx_queues(netdev, + interface->num_tx_queues); + if (err) + goto err_set_queues; + + err = netif_set_real_num_rx_queues(netdev, + interface->num_rx_queues); + if (err) + goto err_set_queues; + +#if IS_ENABLED(CONFIG_VXLAN) + /* update VXLAN port configuration */ + vxlan_get_rx_port(netdev); + +#endif + fm10k_up(interface); + + return 0; + +err_set_queues: + fm10k_qv_free_irq(interface); +err_req_irq: + fm10k_free_all_rx_resources(interface); +err_setup_rx: + fm10k_free_all_tx_resources(interface); +err_setup_tx: + return err; +} + +/** + * fm10k_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +int fm10k_close(struct net_device *netdev) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + + fm10k_down(interface); + + fm10k_qv_free_irq(interface); + + fm10k_del_vxlan_port_all(interface); + + fm10k_free_all_tx_resources(interface); + fm10k_free_all_rx_resources(interface); + + return 0; +} + +static netdev_tx_t fm10k_xmit_frame(struct sk_buff *skb, struct net_device *dev) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + unsigned int r_idx = skb->queue_mapping; + int err; + + if ((skb->protocol == htons(ETH_P_8021Q)) && + !vlan_tx_tag_present(skb)) { + /* FM10K only supports hardware tagging, any tags in frame + * are considered 2nd level or "outer" tags + */ + struct vlan_hdr *vhdr; + __be16 proto; + + /* make sure skb is not shared */ + skb = skb_share_check(skb, GFP_ATOMIC); + if (!skb) + return NETDEV_TX_OK; + + /* make sure there is enough room to move the ethernet header */ + if (unlikely(!pskb_may_pull(skb, VLAN_ETH_HLEN))) + return NETDEV_TX_OK; + + /* verify the skb head is not shared */ + err = skb_cow_head(skb, 0); + if (err) + return NETDEV_TX_OK; + + /* locate vlan header */ + vhdr = (struct vlan_hdr *)(skb->data + ETH_HLEN); + + /* pull the 2 key pieces of data out of it */ + __vlan_hwaccel_put_tag(skb, + htons(ETH_P_8021Q), + ntohs(vhdr->h_vlan_TCI)); + proto = vhdr->h_vlan_encapsulated_proto; + skb->protocol = (ntohs(proto) >= 1536) ? proto : + htons(ETH_P_802_2); + + /* squash it by moving the ethernet addresses up 4 bytes */ + memmove(skb->data + VLAN_HLEN, skb->data, 12); + __skb_pull(skb, VLAN_HLEN); + skb_reset_mac_header(skb); + } + + /* The minimum packet size for a single buffer is 17B so pad the skb + * in order to meet this minimum size requirement. + */ + if (unlikely(skb->len < 17)) { + int pad_len = 17 - skb->len; + + if (skb_pad(skb, pad_len)) + return NETDEV_TX_OK; + __skb_put(skb, pad_len); + } + + /* prepare packet for hardware time stamping */ + if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) + fm10k_ts_tx_enqueue(interface, skb); + + if (r_idx >= interface->num_tx_queues) + r_idx %= interface->num_tx_queues; + + err = fm10k_xmit_frame_ring(skb, interface->tx_ring[r_idx]); + + return err; +} + +static int fm10k_change_mtu(struct net_device *dev, int new_mtu) +{ + if (new_mtu < 68 || new_mtu > FM10K_MAX_JUMBO_FRAME_SIZE) + return -EINVAL; + + dev->mtu = new_mtu; + + return 0; +} + +/** + * fm10k_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ +static void fm10k_tx_timeout(struct net_device *netdev) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + bool real_tx_hang = false; + int i; + +#define TX_TIMEO_LIMIT 16000 + for (i = 0; i < interface->num_tx_queues; i++) { + struct fm10k_ring *tx_ring = interface->tx_ring[i]; + + if (check_for_tx_hang(tx_ring) && fm10k_check_tx_hang(tx_ring)) + real_tx_hang = true; + } + + if (real_tx_hang) { + fm10k_tx_timeout_reset(interface); + } else { + netif_info(interface, drv, netdev, + "Fake Tx hang detected with timeout of %d seconds\n", + netdev->watchdog_timeo/HZ); + + /* fake Tx hang - increase the kernel timeout */ + if (netdev->watchdog_timeo < TX_TIMEO_LIMIT) + netdev->watchdog_timeo *= 2; + } +} + +static int fm10k_uc_vlan_unsync(struct net_device *netdev, + const unsigned char *uc_addr) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_hw *hw = &interface->hw; + u16 glort = interface->glort; + u16 vid = interface->vid; + bool set = !!(vid / VLAN_N_VID); + int err; + + /* drop any leading bits on the VLAN ID */ + vid &= VLAN_N_VID - 1; + + err = hw->mac.ops.update_uc_addr(hw, glort, uc_addr, vid, set, 0); + if (err) + return err; + + /* return non-zero value as we are only doing a partial sync/unsync */ + return 1; +} + +static int fm10k_mc_vlan_unsync(struct net_device *netdev, + const unsigned char *mc_addr) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_hw *hw = &interface->hw; + u16 glort = interface->glort; + u16 vid = interface->vid; + bool set = !!(vid / VLAN_N_VID); + int err; + + /* drop any leading bits on the VLAN ID */ + vid &= VLAN_N_VID - 1; + + err = hw->mac.ops.update_mc_addr(hw, glort, mc_addr, vid, set); + if (err) + return err; + + /* return non-zero value as we are only doing a partial sync/unsync */ + return 1; +} + +static int fm10k_update_vid(struct net_device *netdev, u16 vid, bool set) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_hw *hw = &interface->hw; + s32 err; + + /* updates do not apply to VLAN 0 */ + if (!vid) + return 0; + + if (vid >= VLAN_N_VID) + return -EINVAL; + + /* Verify we have permission to add VLANs */ + if (hw->mac.vlan_override) + return -EACCES; + + /* if default VLAN is already present do nothing */ + if (vid == hw->mac.default_vid) + return -EBUSY; + + /* update active_vlans bitmask */ + set_bit(vid, interface->active_vlans); + if (!set) + clear_bit(vid, interface->active_vlans); + + fm10k_mbx_lock(interface); + + /* only need to update the VLAN if not in promiscous mode */ + if (!(netdev->flags & IFF_PROMISC)) { + err = hw->mac.ops.update_vlan(hw, vid, 0, set); + if (err) + return err; + } + + /* update our base MAC address */ + err = hw->mac.ops.update_uc_addr(hw, interface->glort, hw->mac.addr, + vid, set, 0); + if (err) + return err; + + /* set vid prior to syncing/unsyncing the VLAN */ + interface->vid = vid + (set ? VLAN_N_VID : 0); + + /* Update the unicast and multicast address list to add/drop VLAN */ + __dev_uc_unsync(netdev, fm10k_uc_vlan_unsync); + __dev_mc_unsync(netdev, fm10k_mc_vlan_unsync); + + fm10k_mbx_unlock(interface); + + return 0; +} + +static int fm10k_vlan_rx_add_vid(struct net_device *netdev, + __always_unused __be16 proto, u16 vid) +{ + /* update VLAN and address table based on changes */ + return fm10k_update_vid(netdev, vid, true); +} + +static int fm10k_vlan_rx_kill_vid(struct net_device *netdev, + __always_unused __be16 proto, u16 vid) +{ + /* update VLAN and address table based on changes */ + return fm10k_update_vid(netdev, vid, false); +} + +static u16 fm10k_find_next_vlan(struct fm10k_intfc *interface, u16 vid) +{ + struct fm10k_hw *hw = &interface->hw; + u16 default_vid = hw->mac.default_vid; + u16 vid_limit = vid < default_vid ? default_vid : VLAN_N_VID; + + vid = find_next_bit(interface->active_vlans, vid_limit, ++vid); + + return vid; +} + +static void fm10k_clear_unused_vlans(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + u32 vid, prev_vid; + + /* loop through and find any gaps in the table */ + for (vid = 0, prev_vid = 0; + prev_vid < VLAN_N_VID; + prev_vid = vid + 1, vid = fm10k_find_next_vlan(interface, vid)) { + if (prev_vid == vid) + continue; + + /* send request to clear multiple bits at a time */ + prev_vid += (vid - prev_vid - 1) << FM10K_VLAN_LENGTH_SHIFT; + hw->mac.ops.update_vlan(hw, prev_vid, 0, false); + } +} + +static int __fm10k_uc_sync(struct net_device *dev, + const unsigned char *addr, bool sync) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + u16 vid, glort = interface->glort; + s32 err; + + if (!is_valid_ether_addr(addr)) + return -EADDRNOTAVAIL; + + /* update table with current entries */ + for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 0; + vid < VLAN_N_VID; + vid = fm10k_find_next_vlan(interface, vid)) { + err = hw->mac.ops.update_uc_addr(hw, glort, addr, + vid, sync, 0); + if (err) + return err; + } + + return 0; +} + +static int fm10k_uc_sync(struct net_device *dev, + const unsigned char *addr) +{ + return __fm10k_uc_sync(dev, addr, true); +} + +static int fm10k_uc_unsync(struct net_device *dev, + const unsigned char *addr) +{ + return __fm10k_uc_sync(dev, addr, false); +} + +static int fm10k_set_mac(struct net_device *dev, void *p) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + struct sockaddr *addr = p; + s32 err = 0; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + if (dev->flags & IFF_UP) { + /* setting MAC address requires mailbox */ + fm10k_mbx_lock(interface); + + err = fm10k_uc_sync(dev, addr->sa_data); + if (!err) + fm10k_uc_unsync(dev, hw->mac.addr); + + fm10k_mbx_unlock(interface); + } + + if (!err) { + ether_addr_copy(dev->dev_addr, addr->sa_data); + ether_addr_copy(hw->mac.addr, addr->sa_data); + dev->addr_assign_type &= ~NET_ADDR_RANDOM; + } + + /* if we had a mailbox error suggest trying again */ + return err ? -EAGAIN : 0; +} + +static int __fm10k_mc_sync(struct net_device *dev, + const unsigned char *addr, bool sync) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + u16 vid, glort = interface->glort; + s32 err; + + if (!is_multicast_ether_addr(addr)) + return -EADDRNOTAVAIL; + + /* update table with current entries */ + for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 0; + vid < VLAN_N_VID; + vid = fm10k_find_next_vlan(interface, vid)) { + err = hw->mac.ops.update_mc_addr(hw, glort, addr, vid, sync); + if (err) + return err; + } + + return 0; +} + +static int fm10k_mc_sync(struct net_device *dev, + const unsigned char *addr) +{ + return __fm10k_mc_sync(dev, addr, true); +} + +static int fm10k_mc_unsync(struct net_device *dev, + const unsigned char *addr) +{ + return __fm10k_mc_sync(dev, addr, false); +} + +static void fm10k_set_rx_mode(struct net_device *dev) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_hw *hw = &interface->hw; + int xcast_mode; + + /* no need to update the harwdare if we are not running */ + if (!(dev->flags & IFF_UP)) + return; + + /* determine new mode based on flags */ + xcast_mode = (dev->flags & IFF_PROMISC) ? FM10K_XCAST_MODE_PROMISC : + (dev->flags & IFF_ALLMULTI) ? FM10K_XCAST_MODE_ALLMULTI : + (dev->flags & (IFF_BROADCAST | IFF_MULTICAST)) ? + FM10K_XCAST_MODE_MULTI : FM10K_XCAST_MODE_NONE; + + fm10k_mbx_lock(interface); + + /* syncronize all of the addresses */ + if (xcast_mode != FM10K_XCAST_MODE_PROMISC) { + __dev_uc_sync(dev, fm10k_uc_sync, fm10k_uc_unsync); + if (xcast_mode != FM10K_XCAST_MODE_ALLMULTI) + __dev_mc_sync(dev, fm10k_mc_sync, fm10k_mc_unsync); + } + + /* if we aren't changing modes there is nothing to do */ + if (interface->xcast_mode != xcast_mode) { + /* update VLAN table */ + if (xcast_mode == FM10K_XCAST_MODE_PROMISC) + hw->mac.ops.update_vlan(hw, FM10K_VLAN_ALL, 0, true); + if (interface->xcast_mode == FM10K_XCAST_MODE_PROMISC) + fm10k_clear_unused_vlans(interface); + + /* update xcast mode */ + hw->mac.ops.update_xcast_mode(hw, interface->glort, xcast_mode); + + /* record updated xcast mode state */ + interface->xcast_mode = xcast_mode; + } + + fm10k_mbx_unlock(interface); +} + +void fm10k_restore_rx_state(struct fm10k_intfc *interface) +{ + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + int xcast_mode; + u16 vid, glort; + + /* restore our address if perm_addr is set */ + if (hw->mac.type == fm10k_mac_vf) { + if (is_valid_ether_addr(hw->mac.perm_addr)) { + ether_addr_copy(hw->mac.addr, hw->mac.perm_addr); + ether_addr_copy(netdev->perm_addr, hw->mac.perm_addr); + ether_addr_copy(netdev->dev_addr, hw->mac.perm_addr); + netdev->addr_assign_type &= ~NET_ADDR_RANDOM; + } + + if (hw->mac.vlan_override) + netdev->features &= ~NETIF_F_HW_VLAN_CTAG_RX; + else + netdev->features |= NETIF_F_HW_VLAN_CTAG_RX; + } + + /* record glort for this interface */ + glort = interface->glort; + + /* convert interface flags to xcast mode */ + if (netdev->flags & IFF_PROMISC) + xcast_mode = FM10K_XCAST_MODE_PROMISC; + else if (netdev->flags & IFF_ALLMULTI) + xcast_mode = FM10K_XCAST_MODE_ALLMULTI; + else if (netdev->flags & (IFF_BROADCAST | IFF_MULTICAST)) + xcast_mode = FM10K_XCAST_MODE_MULTI; + else + xcast_mode = FM10K_XCAST_MODE_NONE; + + fm10k_mbx_lock(interface); + + /* Enable logical port */ + hw->mac.ops.update_lport_state(hw, glort, interface->glort_count, true); + + /* update VLAN table */ + hw->mac.ops.update_vlan(hw, FM10K_VLAN_ALL, 0, + xcast_mode == FM10K_XCAST_MODE_PROMISC); + + /* Add filter for VLAN 0 */ + hw->mac.ops.update_vlan(hw, 0, 0, true); + + /* update table with current entries */ + for (vid = hw->mac.default_vid ? fm10k_find_next_vlan(interface, 0) : 0; + vid < VLAN_N_VID; + vid = fm10k_find_next_vlan(interface, vid)) { + hw->mac.ops.update_vlan(hw, vid, 0, true); + hw->mac.ops.update_uc_addr(hw, glort, hw->mac.addr, + vid, true, 0); + } + + /* syncronize all of the addresses */ + if (xcast_mode != FM10K_XCAST_MODE_PROMISC) { + __dev_uc_sync(netdev, fm10k_uc_sync, fm10k_uc_unsync); + if (xcast_mode != FM10K_XCAST_MODE_ALLMULTI) + __dev_mc_sync(netdev, fm10k_mc_sync, fm10k_mc_unsync); + } + + /* update xcast mode */ + hw->mac.ops.update_xcast_mode(hw, glort, xcast_mode); + + fm10k_mbx_unlock(interface); + + /* record updated xcast mode state */ + interface->xcast_mode = xcast_mode; + + /* Restore tunnel configuration */ + fm10k_restore_vxlan_port(interface); +} + +void fm10k_reset_rx_state(struct fm10k_intfc *interface) +{ + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + + fm10k_mbx_lock(interface); + + /* clear the logical port state on lower device */ + hw->mac.ops.update_lport_state(hw, interface->glort, + interface->glort_count, false); + + fm10k_mbx_unlock(interface); + + /* reset flags to default state */ + interface->xcast_mode = FM10K_XCAST_MODE_NONE; + + /* clear the sync flag since the lport has been dropped */ + __dev_uc_unsync(netdev, NULL); + __dev_mc_unsync(netdev, NULL); +} + +/** + * fm10k_get_stats64 - Get System Network Statistics + * @netdev: network interface device structure + * @stats: storage space for 64bit statistics + * + * Returns 64bit statistics, for use in the ndo_get_stats64 callback. This + * function replaces fm10k_get_stats for kernels which support it. + */ +static struct rtnl_link_stats64 *fm10k_get_stats64(struct net_device *netdev, + struct rtnl_link_stats64 *stats) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct fm10k_ring *ring; + unsigned int start, i; + u64 bytes, packets; + + rcu_read_lock(); + + for (i = 0; i < interface->num_rx_queues; i++) { + ring = ACCESS_ONCE(interface->rx_ring[i]); + + if (!ring) + continue; + + do { + start = u64_stats_fetch_begin_irq(&ring->syncp); + packets = ring->stats.packets; + bytes = ring->stats.bytes; + } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); + + stats->rx_packets += packets; + stats->rx_bytes += bytes; + } + + for (i = 0; i < interface->num_tx_queues; i++) { + ring = ACCESS_ONCE(interface->rx_ring[i]); + + if (!ring) + continue; + + do { + start = u64_stats_fetch_begin_irq(&ring->syncp); + packets = ring->stats.packets; + bytes = ring->stats.bytes; + } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); + + stats->tx_packets += packets; + stats->tx_bytes += bytes; + } + + rcu_read_unlock(); + + /* following stats updated by fm10k_service_task() */ + stats->rx_missed_errors = netdev->stats.rx_missed_errors; + + return stats; +} + +int fm10k_setup_tc(struct net_device *dev, u8 tc) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + + /* Currently only the PF supports priority classes */ + if (tc && (interface->hw.mac.type != fm10k_mac_pf)) + return -EINVAL; + + /* Hardware supports up to 8 traffic classes */ + if (tc > 8) + return -EINVAL; + + /* Hardware has to reinitialize queues to match packet + * buffer alignment. Unfortunately, the hardware is not + * flexible enough to do this dynamically. + */ + if (netif_running(dev)) + fm10k_close(dev); + + fm10k_mbx_free_irq(interface); + + fm10k_clear_queueing_scheme(interface); + + /* we expect the prio_tc map to be repopulated later */ + netdev_reset_tc(dev); + netdev_set_num_tc(dev, tc); + + fm10k_init_queueing_scheme(interface); + + fm10k_mbx_request_irq(interface); + + if (netif_running(dev)) + fm10k_open(dev); + + /* flag to indicate SWPRI has yet to be updated */ + interface->flags |= FM10K_FLAG_SWPRI_CONFIG; + + return 0; +} + +static int fm10k_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) +{ + switch (cmd) { + case SIOCGHWTSTAMP: + return fm10k_get_ts_config(netdev, ifr); + case SIOCSHWTSTAMP: + return fm10k_set_ts_config(netdev, ifr); + default: + return -EOPNOTSUPP; + } +} + +static void fm10k_assign_l2_accel(struct fm10k_intfc *interface, + struct fm10k_l2_accel *l2_accel) +{ + struct fm10k_ring *ring; + int i; + + for (i = 0; i < interface->num_rx_queues; i++) { + ring = interface->rx_ring[i]; + rcu_assign_pointer(ring->l2_accel, l2_accel); + } + + interface->l2_accel = l2_accel; +} + +static void *fm10k_dfwd_add_station(struct net_device *dev, + struct net_device *sdev) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_l2_accel *l2_accel = interface->l2_accel; + struct fm10k_l2_accel *old_l2_accel = NULL; + struct fm10k_dglort_cfg dglort = { 0 }; + struct fm10k_hw *hw = &interface->hw; + int size = 0, i; + u16 glort; + + /* allocate l2 accel structure if it is not available */ + if (!l2_accel) { + /* verify there is enough free GLORTs to support l2_accel */ + if (interface->glort_count < 7) + return ERR_PTR(-EBUSY); + + size = offsetof(struct fm10k_l2_accel, macvlan[7]); + l2_accel = kzalloc(size, GFP_KERNEL); + if (!l2_accel) + return ERR_PTR(-ENOMEM); + + l2_accel->size = 7; + l2_accel->dglort = interface->glort; + + /* update pointers */ + fm10k_assign_l2_accel(interface, l2_accel); + /* do not expand if we are at our limit */ + } else if ((l2_accel->count == FM10K_MAX_STATIONS) || + (l2_accel->count == (interface->glort_count - 1))) { + return ERR_PTR(-EBUSY); + /* expand if we have hit the size limit */ + } else if (l2_accel->count == l2_accel->size) { + old_l2_accel = l2_accel; + size = offsetof(struct fm10k_l2_accel, + macvlan[(l2_accel->size * 2) + 1]); + l2_accel = kzalloc(size, GFP_KERNEL); + if (!l2_accel) + return ERR_PTR(-ENOMEM); + + memcpy(l2_accel, old_l2_accel, + offsetof(struct fm10k_l2_accel, + macvlan[old_l2_accel->size])); + + l2_accel->size = (old_l2_accel->size * 2) + 1; + + /* update pointers */ + fm10k_assign_l2_accel(interface, l2_accel); + kfree_rcu(old_l2_accel, rcu); + } + + /* add macvlan to accel table, and record GLORT for position */ + for (i = 0; i < l2_accel->size; i++) { + if (!l2_accel->macvlan[i]) + break; + } + + /* record station */ + l2_accel->macvlan[i] = sdev; + l2_accel->count++; + + /* configure default DGLORT mapping for RSS/DCB */ + dglort.idx = fm10k_dglort_pf_rss; + dglort.inner_rss = 1; + dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask); + dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask); + dglort.glort = interface->glort; + dglort.shared_l = fls(l2_accel->size); + hw->mac.ops.configure_dglort_map(hw, &dglort); + + /* Add rules for this specific dglort to the switch */ + fm10k_mbx_lock(interface); + + glort = l2_accel->dglort + 1 + i; + hw->mac.ops.update_xcast_mode(hw, glort, FM10K_XCAST_MODE_MULTI); + hw->mac.ops.update_uc_addr(hw, glort, sdev->dev_addr, 0, true, 0); + + fm10k_mbx_unlock(interface); + + return sdev; +} + +static void fm10k_dfwd_del_station(struct net_device *dev, void *priv) +{ + struct fm10k_intfc *interface = netdev_priv(dev); + struct fm10k_l2_accel *l2_accel = ACCESS_ONCE(interface->l2_accel); + struct fm10k_dglort_cfg dglort = { 0 }; + struct fm10k_hw *hw = &interface->hw; + struct net_device *sdev = priv; + int i; + u16 glort; + + if (!l2_accel) + return; + + /* search table for matching interface */ + for (i = 0; i < l2_accel->size; i++) { + if (l2_accel->macvlan[i] == sdev) + break; + } + + /* exit if macvlan not found */ + if (i == l2_accel->size) + return; + + /* Remove any rules specific to this dglort */ + fm10k_mbx_lock(interface); + + glort = l2_accel->dglort + 1 + i; + hw->mac.ops.update_xcast_mode(hw, glort, FM10K_XCAST_MODE_NONE); + hw->mac.ops.update_uc_addr(hw, glort, sdev->dev_addr, 0, false, 0); + + fm10k_mbx_unlock(interface); + + /* record removal */ + l2_accel->macvlan[i] = NULL; + l2_accel->count--; + + /* configure default DGLORT mapping for RSS/DCB */ + dglort.idx = fm10k_dglort_pf_rss; + dglort.inner_rss = 1; + dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask); + dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask); + dglort.glort = interface->glort; + if (l2_accel) + dglort.shared_l = fls(l2_accel->size); + hw->mac.ops.configure_dglort_map(hw, &dglort); + + /* If table is empty remove it */ + if (l2_accel->count == 0) { + fm10k_assign_l2_accel(interface, NULL); + kfree_rcu(l2_accel, rcu); + } +} + +static const struct net_device_ops fm10k_netdev_ops = { + .ndo_open = fm10k_open, + .ndo_stop = fm10k_close, + .ndo_validate_addr = eth_validate_addr, + .ndo_start_xmit = fm10k_xmit_frame, + .ndo_set_mac_address = fm10k_set_mac, + .ndo_change_mtu = fm10k_change_mtu, + .ndo_tx_timeout = fm10k_tx_timeout, + .ndo_vlan_rx_add_vid = fm10k_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = fm10k_vlan_rx_kill_vid, + .ndo_set_rx_mode = fm10k_set_rx_mode, + .ndo_get_stats64 = fm10k_get_stats64, + .ndo_setup_tc = fm10k_setup_tc, + .ndo_set_vf_mac = fm10k_ndo_set_vf_mac, + .ndo_set_vf_vlan = fm10k_ndo_set_vf_vlan, + .ndo_set_vf_rate = fm10k_ndo_set_vf_bw, + .ndo_get_vf_config = fm10k_ndo_get_vf_config, + .ndo_add_vxlan_port = fm10k_add_vxlan_port, + .ndo_del_vxlan_port = fm10k_del_vxlan_port, + .ndo_do_ioctl = fm10k_ioctl, + .ndo_dfwd_add_station = fm10k_dfwd_add_station, + .ndo_dfwd_del_station = fm10k_dfwd_del_station, +}; + +#define DEFAULT_DEBUG_LEVEL_SHIFT 3 + +struct net_device *fm10k_alloc_netdev(void) +{ + struct fm10k_intfc *interface; + struct net_device *dev; + + dev = alloc_etherdev_mq(sizeof(struct fm10k_intfc), MAX_QUEUES); + if (!dev) + return NULL; + + /* set net device and ethtool ops */ + dev->netdev_ops = &fm10k_netdev_ops; + fm10k_set_ethtool_ops(dev); + + /* configure default debug level */ + interface = netdev_priv(dev); + interface->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; + + /* configure default features */ + dev->features |= NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_SG | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_TSO_ECN | + NETIF_F_GSO_UDP_TUNNEL | + NETIF_F_RXHASH | + NETIF_F_RXCSUM; + + /* all features defined to this point should be changeable */ + dev->hw_features |= dev->features; + + /* allow user to enable L2 forwarding acceleration */ + dev->hw_features |= NETIF_F_HW_L2FW_DOFFLOAD; + + /* configure VLAN features */ + dev->vlan_features |= dev->features; + + /* configure tunnel offloads */ + dev->hw_enc_features = NETIF_F_IP_CSUM | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_TSO_ECN | + NETIF_F_GSO_UDP_TUNNEL | + NETIF_F_IPV6_CSUM | + NETIF_F_SG; + + /* we want to leave these both on as we cannot disable VLAN tag + * insertion or stripping on the hardware since it is contained + * in the FTAG and not in the frame itself. + */ + dev->features |= NETIF_F_HW_VLAN_CTAG_TX | + NETIF_F_HW_VLAN_CTAG_RX | + NETIF_F_HW_VLAN_CTAG_FILTER; + + dev->priv_flags |= IFF_UNICAST_FLT; + + return dev; +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pci.c b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c new file mode 100644 index 00000000000..e02036c427b --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pci.c @@ -0,0 +1,2166 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include <linux/module.h> +#include <linux/aer.h> + +#include "fm10k.h" + +static const struct fm10k_info *fm10k_info_tbl[] = { + [fm10k_device_pf] = &fm10k_pf_info, + [fm10k_device_vf] = &fm10k_vf_info, +}; + +/** + * fm10k_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static const struct pci_device_id fm10k_pci_tbl[] = { + { PCI_VDEVICE(INTEL, FM10K_DEV_ID_PF), fm10k_device_pf }, + { PCI_VDEVICE(INTEL, FM10K_DEV_ID_VF), fm10k_device_vf }, + /* required last entry */ + { 0, } +}; +MODULE_DEVICE_TABLE(pci, fm10k_pci_tbl); + +u16 fm10k_read_pci_cfg_word(struct fm10k_hw *hw, u32 reg) +{ + struct fm10k_intfc *interface = hw->back; + u16 value = 0; + + if (FM10K_REMOVED(hw->hw_addr)) + return ~value; + + pci_read_config_word(interface->pdev, reg, &value); + if (value == 0xFFFF) + fm10k_write_flush(hw); + + return value; +} + +u32 fm10k_read_reg(struct fm10k_hw *hw, int reg) +{ + u32 __iomem *hw_addr = ACCESS_ONCE(hw->hw_addr); + u32 value = 0; + + if (FM10K_REMOVED(hw_addr)) + return ~value; + + value = readl(&hw_addr[reg]); + if (!(~value) && (!reg || !(~readl(hw_addr)))) { + struct fm10k_intfc *interface = hw->back; + struct net_device *netdev = interface->netdev; + + hw->hw_addr = NULL; + netif_device_detach(netdev); + netdev_err(netdev, "PCIe link lost, device now detached\n"); + } + + return value; +} + +static int fm10k_hw_ready(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + + fm10k_write_flush(hw); + + return FM10K_REMOVED(hw->hw_addr) ? -ENODEV : 0; +} + +void fm10k_service_event_schedule(struct fm10k_intfc *interface) +{ + if (!test_bit(__FM10K_SERVICE_DISABLE, &interface->state) && + !test_and_set_bit(__FM10K_SERVICE_SCHED, &interface->state)) + schedule_work(&interface->service_task); +} + +static void fm10k_service_event_complete(struct fm10k_intfc *interface) +{ + BUG_ON(!test_bit(__FM10K_SERVICE_SCHED, &interface->state)); + + /* flush memory to make sure state is correct before next watchog */ + smp_mb__before_atomic(); + clear_bit(__FM10K_SERVICE_SCHED, &interface->state); +} + +/** + * fm10k_service_timer - Timer Call-back + * @data: pointer to interface cast into an unsigned long + **/ +static void fm10k_service_timer(unsigned long data) +{ + struct fm10k_intfc *interface = (struct fm10k_intfc *)data; + + /* Reset the timer */ + mod_timer(&interface->service_timer, (HZ * 2) + jiffies); + + fm10k_service_event_schedule(interface); +} + +static void fm10k_detach_subtask(struct fm10k_intfc *interface) +{ + struct net_device *netdev = interface->netdev; + + /* do nothing if device is still present or hw_addr is set */ + if (netif_device_present(netdev) || interface->hw.hw_addr) + return; + + rtnl_lock(); + + if (netif_running(netdev)) + dev_close(netdev); + + rtnl_unlock(); +} + +static void fm10k_reinit(struct fm10k_intfc *interface) +{ + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + int err; + + WARN_ON(in_interrupt()); + + /* put off any impending NetWatchDogTimeout */ + netdev->trans_start = jiffies; + + while (test_and_set_bit(__FM10K_RESETTING, &interface->state)) + usleep_range(1000, 2000); + + rtnl_lock(); + + fm10k_iov_suspend(interface->pdev); + + if (netif_running(netdev)) + fm10k_close(netdev); + + fm10k_mbx_free_irq(interface); + + /* delay any future reset requests */ + interface->last_reset = jiffies + (10 * HZ); + + /* reset and initialize the hardware so it is in a known state */ + err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw); + if (err) + dev_err(&interface->pdev->dev, "init_hw failed: %d\n", err); + + /* reassociate interrupts */ + fm10k_mbx_request_irq(interface); + + /* reset clock */ + fm10k_ts_reset(interface); + + if (netif_running(netdev)) + fm10k_open(netdev); + + fm10k_iov_resume(interface->pdev); + + rtnl_unlock(); + + clear_bit(__FM10K_RESETTING, &interface->state); +} + +static void fm10k_reset_subtask(struct fm10k_intfc *interface) +{ + if (!(interface->flags & FM10K_FLAG_RESET_REQUESTED)) + return; + + interface->flags &= ~FM10K_FLAG_RESET_REQUESTED; + + netdev_err(interface->netdev, "Reset interface\n"); + interface->tx_timeout_count++; + + fm10k_reinit(interface); +} + +/** + * fm10k_configure_swpri_map - Configure Receive SWPRI to PC mapping + * @interface: board private structure + * + * Configure the SWPRI to PC mapping for the port. + **/ +static void fm10k_configure_swpri_map(struct fm10k_intfc *interface) +{ + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + int i; + + /* clear flag indicating update is needed */ + interface->flags &= ~FM10K_FLAG_SWPRI_CONFIG; + + /* these registers are only available on the PF */ + if (hw->mac.type != fm10k_mac_pf) + return; + + /* configure SWPRI to PC map */ + for (i = 0; i < FM10K_SWPRI_MAX; i++) + fm10k_write_reg(hw, FM10K_SWPRI_MAP(i), + netdev_get_prio_tc_map(netdev, i)); +} + +/** + * fm10k_watchdog_update_host_state - Update the link status based on host. + * @interface: board private structure + **/ +static void fm10k_watchdog_update_host_state(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + s32 err; + + if (test_bit(__FM10K_LINK_DOWN, &interface->state)) { + interface->host_ready = false; + if (time_is_after_jiffies(interface->link_down_event)) + return; + clear_bit(__FM10K_LINK_DOWN, &interface->state); + } + + if (interface->flags & FM10K_FLAG_SWPRI_CONFIG) { + if (rtnl_trylock()) { + fm10k_configure_swpri_map(interface); + rtnl_unlock(); + } + } + + /* lock the mailbox for transmit and receive */ + fm10k_mbx_lock(interface); + + err = hw->mac.ops.get_host_state(hw, &interface->host_ready); + if (err && time_is_before_jiffies(interface->last_reset)) + interface->flags |= FM10K_FLAG_RESET_REQUESTED; + + /* free the lock */ + fm10k_mbx_unlock(interface); +} + +/** + * fm10k_mbx_subtask - Process upstream and downstream mailboxes + * @interface: board private structure + * + * This function will process both the upstream and downstream mailboxes. + * It is necessary for us to hold the rtnl_lock while doing this as the + * mailbox accesses are protected by this lock. + **/ +static void fm10k_mbx_subtask(struct fm10k_intfc *interface) +{ + /* process upstream mailbox and update device state */ + fm10k_watchdog_update_host_state(interface); + + /* process downstream mailboxes */ + fm10k_iov_mbx(interface); +} + +/** + * fm10k_watchdog_host_is_ready - Update netdev status based on host ready + * @interface: board private structure + **/ +static void fm10k_watchdog_host_is_ready(struct fm10k_intfc *interface) +{ + struct net_device *netdev = interface->netdev; + + /* only continue if link state is currently down */ + if (netif_carrier_ok(netdev)) + return; + + netif_info(interface, drv, netdev, "NIC Link is up\n"); + + netif_carrier_on(netdev); + netif_tx_wake_all_queues(netdev); +} + +/** + * fm10k_watchdog_host_not_ready - Update netdev status based on host not ready + * @interface: board private structure + **/ +static void fm10k_watchdog_host_not_ready(struct fm10k_intfc *interface) +{ + struct net_device *netdev = interface->netdev; + + /* only continue if link state is currently up */ + if (!netif_carrier_ok(netdev)) + return; + + netif_info(interface, drv, netdev, "NIC Link is down\n"); + + netif_carrier_off(netdev); + netif_tx_stop_all_queues(netdev); +} + +/** + * fm10k_update_stats - Update the board statistics counters. + * @interface: board private structure + **/ +void fm10k_update_stats(struct fm10k_intfc *interface) +{ + struct net_device_stats *net_stats = &interface->netdev->stats; + struct fm10k_hw *hw = &interface->hw; + u64 rx_errors = 0, rx_csum_errors = 0, tx_csum_errors = 0; + u64 restart_queue = 0, tx_busy = 0, alloc_failed = 0; + u64 rx_bytes_nic = 0, rx_pkts_nic = 0, rx_drops_nic = 0; + u64 tx_bytes_nic = 0, tx_pkts_nic = 0; + u64 bytes, pkts; + int i; + + /* do not allow stats update via service task for next second */ + interface->next_stats_update = jiffies + HZ; + + /* gather some stats to the interface struct that are per queue */ + for (bytes = 0, pkts = 0, i = 0; i < interface->num_tx_queues; i++) { + struct fm10k_ring *tx_ring = interface->tx_ring[i]; + + restart_queue += tx_ring->tx_stats.restart_queue; + tx_busy += tx_ring->tx_stats.tx_busy; + tx_csum_errors += tx_ring->tx_stats.csum_err; + bytes += tx_ring->stats.bytes; + pkts += tx_ring->stats.packets; + } + + interface->restart_queue = restart_queue; + interface->tx_busy = tx_busy; + net_stats->tx_bytes = bytes; + net_stats->tx_packets = pkts; + interface->tx_csum_errors = tx_csum_errors; + /* gather some stats to the interface struct that are per queue */ + for (bytes = 0, pkts = 0, i = 0; i < interface->num_rx_queues; i++) { + struct fm10k_ring *rx_ring = interface->rx_ring[i]; + + bytes += rx_ring->stats.bytes; + pkts += rx_ring->stats.packets; + alloc_failed += rx_ring->rx_stats.alloc_failed; + rx_csum_errors += rx_ring->rx_stats.csum_err; + rx_errors += rx_ring->rx_stats.errors; + } + + net_stats->rx_bytes = bytes; + net_stats->rx_packets = pkts; + interface->alloc_failed = alloc_failed; + interface->rx_csum_errors = rx_csum_errors; + interface->rx_errors = rx_errors; + + hw->mac.ops.update_hw_stats(hw, &interface->stats); + + for (i = 0; i < FM10K_MAX_QUEUES_PF; i++) { + struct fm10k_hw_stats_q *q = &interface->stats.q[i]; + + tx_bytes_nic += q->tx_bytes.count; + tx_pkts_nic += q->tx_packets.count; + rx_bytes_nic += q->rx_bytes.count; + rx_pkts_nic += q->rx_packets.count; + rx_drops_nic += q->rx_drops.count; + } + + interface->tx_bytes_nic = tx_bytes_nic; + interface->tx_packets_nic = tx_pkts_nic; + interface->rx_bytes_nic = rx_bytes_nic; + interface->rx_packets_nic = rx_pkts_nic; + interface->rx_drops_nic = rx_drops_nic; + + /* Fill out the OS statistics structure */ + net_stats->rx_errors = interface->stats.xec.count; + net_stats->rx_dropped = interface->stats.nodesc_drop.count; +} + +/** + * fm10k_watchdog_flush_tx - flush queues on host not ready + * @interface - pointer to the device interface structure + **/ +static void fm10k_watchdog_flush_tx(struct fm10k_intfc *interface) +{ + int some_tx_pending = 0; + int i; + + /* nothing to do if carrier is up */ + if (netif_carrier_ok(interface->netdev)) + return; + + for (i = 0; i < interface->num_tx_queues; i++) { + struct fm10k_ring *tx_ring = interface->tx_ring[i]; + + if (tx_ring->next_to_use != tx_ring->next_to_clean) { + some_tx_pending = 1; + break; + } + } + + /* We've lost link, so the controller stops DMA, but we've got + * queued Tx work that's never going to get done, so reset + * controller to flush Tx. + */ + if (some_tx_pending) + interface->flags |= FM10K_FLAG_RESET_REQUESTED; +} + +/** + * fm10k_watchdog_subtask - check and bring link up + * @interface - pointer to the device interface structure + **/ +static void fm10k_watchdog_subtask(struct fm10k_intfc *interface) +{ + /* if interface is down do nothing */ + if (test_bit(__FM10K_DOWN, &interface->state) || + test_bit(__FM10K_RESETTING, &interface->state)) + return; + + if (interface->host_ready) + fm10k_watchdog_host_is_ready(interface); + else + fm10k_watchdog_host_not_ready(interface); + + /* update stats only once every second */ + if (time_is_before_jiffies(interface->next_stats_update)) + fm10k_update_stats(interface); + + /* flush any uncompleted work */ + fm10k_watchdog_flush_tx(interface); +} + +/** + * fm10k_check_hang_subtask - check for hung queues and dropped interrupts + * @interface - pointer to the device interface structure + * + * This function serves two purposes. First it strobes the interrupt lines + * in order to make certain interrupts are occurring. Secondly it sets the + * bits needed to check for TX hangs. As a result we should immediately + * determine if a hang has occurred. + */ +static void fm10k_check_hang_subtask(struct fm10k_intfc *interface) +{ + int i; + + /* If we're down or resetting, just bail */ + if (test_bit(__FM10K_DOWN, &interface->state) || + test_bit(__FM10K_RESETTING, &interface->state)) + return; + + /* rate limit tx hang checks to only once every 2 seconds */ + if (time_is_after_eq_jiffies(interface->next_tx_hang_check)) + return; + interface->next_tx_hang_check = jiffies + (2 * HZ); + + if (netif_carrier_ok(interface->netdev)) { + /* Force detection of hung controller */ + for (i = 0; i < interface->num_tx_queues; i++) + set_check_for_tx_hang(interface->tx_ring[i]); + + /* Rearm all in-use q_vectors for immediate firing */ + for (i = 0; i < interface->num_q_vectors; i++) { + struct fm10k_q_vector *qv = interface->q_vector[i]; + + if (!qv->tx.count && !qv->rx.count) + continue; + writel(FM10K_ITR_ENABLE | FM10K_ITR_PENDING2, qv->itr); + } + } +} + +/** + * fm10k_service_task - manages and runs subtasks + * @work: pointer to work_struct containing our data + **/ +static void fm10k_service_task(struct work_struct *work) +{ + struct fm10k_intfc *interface; + + interface = container_of(work, struct fm10k_intfc, service_task); + + /* tasks always capable of running, but must be rtnl protected */ + fm10k_mbx_subtask(interface); + fm10k_detach_subtask(interface); + fm10k_reset_subtask(interface); + + /* tasks only run when interface is up */ + fm10k_watchdog_subtask(interface); + fm10k_check_hang_subtask(interface); + fm10k_ts_tx_subtask(interface); + + /* release lock on service events to allow scheduling next event */ + fm10k_service_event_complete(interface); +} + +/** + * fm10k_configure_tx_ring - Configure Tx ring after Reset + * @interface: board private structure + * @ring: structure containing ring specific data + * + * Configure the Tx descriptor ring after a reset. + **/ +static void fm10k_configure_tx_ring(struct fm10k_intfc *interface, + struct fm10k_ring *ring) +{ + struct fm10k_hw *hw = &interface->hw; + u64 tdba = ring->dma; + u32 size = ring->count * sizeof(struct fm10k_tx_desc); + u32 txint = FM10K_INT_MAP_DISABLE; + u32 txdctl = FM10K_TXDCTL_ENABLE | (1 << FM10K_TXDCTL_MAX_TIME_SHIFT); + u8 reg_idx = ring->reg_idx; + + /* disable queue to avoid issues while updating state */ + fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), 0); + fm10k_write_flush(hw); + + /* possible poll here to verify ring resources have been cleaned */ + + /* set location and size for descriptor ring */ + fm10k_write_reg(hw, FM10K_TDBAL(reg_idx), tdba & DMA_BIT_MASK(32)); + fm10k_write_reg(hw, FM10K_TDBAH(reg_idx), tdba >> 32); + fm10k_write_reg(hw, FM10K_TDLEN(reg_idx), size); + + /* reset head and tail pointers */ + fm10k_write_reg(hw, FM10K_TDH(reg_idx), 0); + fm10k_write_reg(hw, FM10K_TDT(reg_idx), 0); + + /* store tail pointer */ + ring->tail = &interface->uc_addr[FM10K_TDT(reg_idx)]; + + /* reset ntu and ntc to place SW in sync with hardwdare */ + ring->next_to_clean = 0; + ring->next_to_use = 0; + + /* Map interrupt */ + if (ring->q_vector) { + txint = ring->q_vector->v_idx + NON_Q_VECTORS(hw); + txint |= FM10K_INT_MAP_TIMER0; + } + + fm10k_write_reg(hw, FM10K_TXINT(reg_idx), txint); + + /* enable use of FTAG bit in Tx descriptor, register is RO for VF */ + fm10k_write_reg(hw, FM10K_PFVTCTL(reg_idx), + FM10K_PFVTCTL_FTAG_DESC_ENABLE); + + /* enable queue */ + fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), txdctl); +} + +/** + * fm10k_enable_tx_ring - Verify Tx ring is enabled after configuration + * @interface: board private structure + * @ring: structure containing ring specific data + * + * Verify the Tx descriptor ring is ready for transmit. + **/ +static void fm10k_enable_tx_ring(struct fm10k_intfc *interface, + struct fm10k_ring *ring) +{ + struct fm10k_hw *hw = &interface->hw; + int wait_loop = 10; + u32 txdctl; + u8 reg_idx = ring->reg_idx; + + /* if we are already enabled just exit */ + if (fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx)) & FM10K_TXDCTL_ENABLE) + return; + + /* poll to verify queue is enabled */ + do { + usleep_range(1000, 2000); + txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx)); + } while (!(txdctl & FM10K_TXDCTL_ENABLE) && --wait_loop); + if (!wait_loop) + netif_err(interface, drv, interface->netdev, + "Could not enable Tx Queue %d\n", reg_idx); +} + +/** + * fm10k_configure_tx - Configure Transmit Unit after Reset + * @interface: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ +static void fm10k_configure_tx(struct fm10k_intfc *interface) +{ + int i; + + /* Setup the HW Tx Head and Tail descriptor pointers */ + for (i = 0; i < interface->num_tx_queues; i++) + fm10k_configure_tx_ring(interface, interface->tx_ring[i]); + + /* poll here to verify that Tx rings are now enabled */ + for (i = 0; i < interface->num_tx_queues; i++) + fm10k_enable_tx_ring(interface, interface->tx_ring[i]); +} + +/** + * fm10k_configure_rx_ring - Configure Rx ring after Reset + * @interface: board private structure + * @ring: structure containing ring specific data + * + * Configure the Rx descriptor ring after a reset. + **/ +static void fm10k_configure_rx_ring(struct fm10k_intfc *interface, + struct fm10k_ring *ring) +{ + u64 rdba = ring->dma; + struct fm10k_hw *hw = &interface->hw; + u32 size = ring->count * sizeof(union fm10k_rx_desc); + u32 rxqctl = FM10K_RXQCTL_ENABLE | FM10K_RXQCTL_PF; + u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY; + u32 srrctl = FM10K_SRRCTL_BUFFER_CHAINING_EN; + u32 rxint = FM10K_INT_MAP_DISABLE; + u8 rx_pause = interface->rx_pause; + u8 reg_idx = ring->reg_idx; + + /* disable queue to avoid issues while updating state */ + fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), 0); + fm10k_write_flush(hw); + + /* possible poll here to verify ring resources have been cleaned */ + + /* set location and size for descriptor ring */ + fm10k_write_reg(hw, FM10K_RDBAL(reg_idx), rdba & DMA_BIT_MASK(32)); + fm10k_write_reg(hw, FM10K_RDBAH(reg_idx), rdba >> 32); + fm10k_write_reg(hw, FM10K_RDLEN(reg_idx), size); + + /* reset head and tail pointers */ + fm10k_write_reg(hw, FM10K_RDH(reg_idx), 0); + fm10k_write_reg(hw, FM10K_RDT(reg_idx), 0); + + /* store tail pointer */ + ring->tail = &interface->uc_addr[FM10K_RDT(reg_idx)]; + + /* reset ntu and ntc to place SW in sync with hardwdare */ + ring->next_to_clean = 0; + ring->next_to_use = 0; + ring->next_to_alloc = 0; + + /* Configure the Rx buffer size for one buff without split */ + srrctl |= FM10K_RX_BUFSZ >> FM10K_SRRCTL_BSIZEPKT_SHIFT; + + /* Configure the Rx ring to supress loopback packets */ + srrctl |= FM10K_SRRCTL_LOOPBACK_SUPPRESS; + fm10k_write_reg(hw, FM10K_SRRCTL(reg_idx), srrctl); + + /* Enable drop on empty */ +#ifdef CONFIG_DCB + if (interface->pfc_en) + rx_pause = interface->pfc_en; +#endif + if (!(rx_pause & (1 << ring->qos_pc))) + rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY; + + fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl); + + /* assign default VLAN to queue */ + ring->vid = hw->mac.default_vid; + + /* Map interrupt */ + if (ring->q_vector) { + rxint = ring->q_vector->v_idx + NON_Q_VECTORS(hw); + rxint |= FM10K_INT_MAP_TIMER1; + } + + fm10k_write_reg(hw, FM10K_RXINT(reg_idx), rxint); + + /* enable queue */ + fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), rxqctl); + + /* place buffers on ring for receive data */ + fm10k_alloc_rx_buffers(ring, fm10k_desc_unused(ring)); +} + +/** + * fm10k_update_rx_drop_en - Configures the drop enable bits for Rx rings + * @interface: board private structure + * + * Configure the drop enable bits for the Rx rings. + **/ +void fm10k_update_rx_drop_en(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + u8 rx_pause = interface->rx_pause; + int i; + +#ifdef CONFIG_DCB + if (interface->pfc_en) + rx_pause = interface->pfc_en; + +#endif + for (i = 0; i < interface->num_rx_queues; i++) { + struct fm10k_ring *ring = interface->rx_ring[i]; + u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY; + u8 reg_idx = ring->reg_idx; + + if (!(rx_pause & (1 << ring->qos_pc))) + rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY; + + fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl); + } +} + +/** + * fm10k_configure_dglort - Configure Receive DGLORT after reset + * @interface: board private structure + * + * Configure the DGLORT description and RSS tables. + **/ +static void fm10k_configure_dglort(struct fm10k_intfc *interface) +{ + struct fm10k_dglort_cfg dglort = { 0 }; + struct fm10k_hw *hw = &interface->hw; + int i; + u32 mrqc; + + /* Fill out hash function seeds */ + for (i = 0; i < FM10K_RSSRK_SIZE; i++) + fm10k_write_reg(hw, FM10K_RSSRK(0, i), interface->rssrk[i]); + + /* Write RETA table to hardware */ + for (i = 0; i < FM10K_RETA_SIZE; i++) + fm10k_write_reg(hw, FM10K_RETA(0, i), interface->reta[i]); + + /* Generate RSS hash based on packet types, TCP/UDP + * port numbers and/or IPv4/v6 src and dst addresses + */ + mrqc = FM10K_MRQC_IPV4 | + FM10K_MRQC_TCP_IPV4 | + FM10K_MRQC_IPV6 | + FM10K_MRQC_TCP_IPV6; + + if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV4_UDP) + mrqc |= FM10K_MRQC_UDP_IPV4; + if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV6_UDP) + mrqc |= FM10K_MRQC_UDP_IPV6; + + fm10k_write_reg(hw, FM10K_MRQC(0), mrqc); + + /* configure default DGLORT mapping for RSS/DCB */ + dglort.inner_rss = 1; + dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask); + dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask); + hw->mac.ops.configure_dglort_map(hw, &dglort); + + /* assign GLORT per queue for queue mapped testing */ + if (interface->glort_count > 64) { + memset(&dglort, 0, sizeof(dglort)); + dglort.inner_rss = 1; + dglort.glort = interface->glort + 64; + dglort.idx = fm10k_dglort_pf_queue; + dglort.queue_l = fls(interface->num_rx_queues - 1); + hw->mac.ops.configure_dglort_map(hw, &dglort); + } + + /* assign glort value for RSS/DCB specific to this interface */ + memset(&dglort, 0, sizeof(dglort)); + dglort.inner_rss = 1; + dglort.glort = interface->glort; + dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask); + dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask); + /* configure DGLORT mapping for RSS/DCB */ + dglort.idx = fm10k_dglort_pf_rss; + if (interface->l2_accel) + dglort.shared_l = fls(interface->l2_accel->size); + hw->mac.ops.configure_dglort_map(hw, &dglort); +} + +/** + * fm10k_configure_rx - Configure Receive Unit after Reset + * @interface: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ +static void fm10k_configure_rx(struct fm10k_intfc *interface) +{ + int i; + + /* Configure SWPRI to PC map */ + fm10k_configure_swpri_map(interface); + + /* Configure RSS and DGLORT map */ + fm10k_configure_dglort(interface); + + /* Setup the HW Rx Head and Tail descriptor pointers */ + for (i = 0; i < interface->num_rx_queues; i++) + fm10k_configure_rx_ring(interface, interface->rx_ring[i]); + + /* possible poll here to verify that Rx rings are now enabled */ +} + +static void fm10k_napi_enable_all(struct fm10k_intfc *interface) +{ + struct fm10k_q_vector *q_vector; + int q_idx; + + for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) { + q_vector = interface->q_vector[q_idx]; + napi_enable(&q_vector->napi); + } +} + +static irqreturn_t fm10k_msix_clean_rings(int irq, void *data) +{ + struct fm10k_q_vector *q_vector = data; + + if (q_vector->rx.count || q_vector->tx.count) + napi_schedule(&q_vector->napi); + + return IRQ_HANDLED; +} + +static irqreturn_t fm10k_msix_mbx_vf(int irq, void *data) +{ + struct fm10k_intfc *interface = data; + struct fm10k_hw *hw = &interface->hw; + struct fm10k_mbx_info *mbx = &hw->mbx; + + /* re-enable mailbox interrupt and indicate 20us delay */ + fm10k_write_reg(hw, FM10K_VFITR(FM10K_MBX_VECTOR), + FM10K_ITR_ENABLE | FM10K_MBX_INT_DELAY); + + /* service upstream mailbox */ + if (fm10k_mbx_trylock(interface)) { + mbx->ops.process(hw, mbx); + fm10k_mbx_unlock(interface); + } + + hw->mac.get_host_state = 1; + fm10k_service_event_schedule(interface); + + return IRQ_HANDLED; +} + +#define FM10K_ERR_MSG(type) case (type): error = #type; break +static void fm10k_print_fault(struct fm10k_intfc *interface, int type, + struct fm10k_fault *fault) +{ + struct pci_dev *pdev = interface->pdev; + char *error; + + switch (type) { + case FM10K_PCA_FAULT: + switch (fault->type) { + default: + error = "Unknown PCA error"; + break; + FM10K_ERR_MSG(PCA_NO_FAULT); + FM10K_ERR_MSG(PCA_UNMAPPED_ADDR); + FM10K_ERR_MSG(PCA_BAD_QACCESS_PF); + FM10K_ERR_MSG(PCA_BAD_QACCESS_VF); + FM10K_ERR_MSG(PCA_MALICIOUS_REQ); + FM10K_ERR_MSG(PCA_POISONED_TLP); + FM10K_ERR_MSG(PCA_TLP_ABORT); + } + break; + case FM10K_THI_FAULT: + switch (fault->type) { + default: + error = "Unknown THI error"; + break; + FM10K_ERR_MSG(THI_NO_FAULT); + FM10K_ERR_MSG(THI_MAL_DIS_Q_FAULT); + } + break; + case FM10K_FUM_FAULT: + switch (fault->type) { + default: + error = "Unknown FUM error"; + break; + FM10K_ERR_MSG(FUM_NO_FAULT); + FM10K_ERR_MSG(FUM_UNMAPPED_ADDR); + FM10K_ERR_MSG(FUM_BAD_VF_QACCESS); + FM10K_ERR_MSG(FUM_ADD_DECODE_ERR); + FM10K_ERR_MSG(FUM_RO_ERROR); + FM10K_ERR_MSG(FUM_QPRC_CRC_ERROR); + FM10K_ERR_MSG(FUM_CSR_TIMEOUT); + FM10K_ERR_MSG(FUM_INVALID_TYPE); + FM10K_ERR_MSG(FUM_INVALID_LENGTH); + FM10K_ERR_MSG(FUM_INVALID_BE); + FM10K_ERR_MSG(FUM_INVALID_ALIGN); + } + break; + default: + error = "Undocumented fault"; + break; + } + + dev_warn(&pdev->dev, + "%s Address: 0x%llx SpecInfo: 0x%x Func: %02x.%0x\n", + error, fault->address, fault->specinfo, + PCI_SLOT(fault->func), PCI_FUNC(fault->func)); +} + +static void fm10k_report_fault(struct fm10k_intfc *interface, u32 eicr) +{ + struct fm10k_hw *hw = &interface->hw; + struct fm10k_fault fault = { 0 }; + int type, err; + + for (eicr &= FM10K_EICR_FAULT_MASK, type = FM10K_PCA_FAULT; + eicr; + eicr >>= 1, type += FM10K_FAULT_SIZE) { + /* only check if there is an error reported */ + if (!(eicr & 0x1)) + continue; + + /* retrieve fault info */ + err = hw->mac.ops.get_fault(hw, type, &fault); + if (err) { + dev_err(&interface->pdev->dev, + "error reading fault\n"); + continue; + } + + fm10k_print_fault(interface, type, &fault); + } +} + +static void fm10k_reset_drop_on_empty(struct fm10k_intfc *interface, u32 eicr) +{ + struct fm10k_hw *hw = &interface->hw; + const u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY; + u32 maxholdq; + int q; + + if (!(eicr & FM10K_EICR_MAXHOLDTIME)) + return; + + maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(7)); + if (maxholdq) + fm10k_write_reg(hw, FM10K_MAXHOLDQ(7), maxholdq); + for (q = 255;;) { + if (maxholdq & (1 << 31)) { + if (q < FM10K_MAX_QUEUES_PF) { + interface->rx_overrun_pf++; + fm10k_write_reg(hw, FM10K_RXDCTL(q), rxdctl); + } else { + interface->rx_overrun_vf++; + } + } + + maxholdq *= 2; + if (!maxholdq) + q &= ~(32 - 1); + + if (!q) + break; + + if (q-- % 32) + continue; + + maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(q / 32)); + if (maxholdq) + fm10k_write_reg(hw, FM10K_MAXHOLDQ(q / 32), maxholdq); + } +} + +static irqreturn_t fm10k_msix_mbx_pf(int irq, void *data) +{ + struct fm10k_intfc *interface = data; + struct fm10k_hw *hw = &interface->hw; + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 eicr; + + /* unmask any set bits related to this interrupt */ + eicr = fm10k_read_reg(hw, FM10K_EICR); + fm10k_write_reg(hw, FM10K_EICR, eicr & (FM10K_EICR_MAILBOX | + FM10K_EICR_SWITCHREADY | + FM10K_EICR_SWITCHNOTREADY)); + + /* report any faults found to the message log */ + fm10k_report_fault(interface, eicr); + + /* reset any queues disabled due to receiver overrun */ + fm10k_reset_drop_on_empty(interface, eicr); + + /* service mailboxes */ + if (fm10k_mbx_trylock(interface)) { + mbx->ops.process(hw, mbx); + fm10k_iov_event(interface); + fm10k_mbx_unlock(interface); + } + + /* if switch toggled state we should reset GLORTs */ + if (eicr & FM10K_EICR_SWITCHNOTREADY) { + /* force link down for at least 4 seconds */ + interface->link_down_event = jiffies + (4 * HZ); + set_bit(__FM10K_LINK_DOWN, &interface->state); + + /* reset dglort_map back to no config */ + hw->mac.dglort_map = FM10K_DGLORTMAP_NONE; + } + + /* we should validate host state after interrupt event */ + hw->mac.get_host_state = 1; + fm10k_service_event_schedule(interface); + + /* re-enable mailbox interrupt and indicate 20us delay */ + fm10k_write_reg(hw, FM10K_ITR(FM10K_MBX_VECTOR), + FM10K_ITR_ENABLE | FM10K_MBX_INT_DELAY); + + return IRQ_HANDLED; +} + +void fm10k_mbx_free_irq(struct fm10k_intfc *interface) +{ + struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR]; + struct fm10k_hw *hw = &interface->hw; + int itr_reg; + + /* disconnect the mailbox */ + hw->mbx.ops.disconnect(hw, &hw->mbx); + + /* disable Mailbox cause */ + if (hw->mac.type == fm10k_mac_pf) { + fm10k_write_reg(hw, FM10K_EIMR, + FM10K_EIMR_DISABLE(PCA_FAULT) | + FM10K_EIMR_DISABLE(FUM_FAULT) | + FM10K_EIMR_DISABLE(MAILBOX) | + FM10K_EIMR_DISABLE(SWITCHREADY) | + FM10K_EIMR_DISABLE(SWITCHNOTREADY) | + FM10K_EIMR_DISABLE(SRAMERROR) | + FM10K_EIMR_DISABLE(VFLR) | + FM10K_EIMR_DISABLE(MAXHOLDTIME)); + itr_reg = FM10K_ITR(FM10K_MBX_VECTOR); + } else { + itr_reg = FM10K_VFITR(FM10K_MBX_VECTOR); + } + + fm10k_write_reg(hw, itr_reg, FM10K_ITR_MASK_SET); + + free_irq(entry->vector, interface); +} + +static s32 fm10k_mbx_mac_addr(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + bool vlan_override = hw->mac.vlan_override; + u16 default_vid = hw->mac.default_vid; + struct fm10k_intfc *interface; + s32 err; + + err = fm10k_msg_mac_vlan_vf(hw, results, mbx); + if (err) + return err; + + interface = container_of(hw, struct fm10k_intfc, hw); + + /* MAC was changed so we need reset */ + if (is_valid_ether_addr(hw->mac.perm_addr) && + memcmp(hw->mac.perm_addr, hw->mac.addr, ETH_ALEN)) + interface->flags |= FM10K_FLAG_RESET_REQUESTED; + + /* VLAN override was changed, or default VLAN changed */ + if ((vlan_override != hw->mac.vlan_override) || + (default_vid != hw->mac.default_vid)) + interface->flags |= FM10K_FLAG_RESET_REQUESTED; + + return 0; +} + +static s32 fm10k_1588_msg_vf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_intfc *interface; + u64 timestamp; + s32 err; + + err = fm10k_tlv_attr_get_u64(results[FM10K_1588_MSG_TIMESTAMP], + ×tamp); + if (err) + return err; + + interface = container_of(hw, struct fm10k_intfc, hw); + + fm10k_ts_tx_hwtstamp(interface, 0, timestamp); + + return 0; +} + +/* generic error handler for mailbox issues */ +static s32 fm10k_mbx_error(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_intfc *interface; + struct pci_dev *pdev; + + interface = container_of(hw, struct fm10k_intfc, hw); + pdev = interface->pdev; + + dev_err(&pdev->dev, "Unknown message ID %u\n", + **results & FM10K_TLV_ID_MASK); + + return 0; +} + +static const struct fm10k_msg_data vf_mbx_data[] = { + FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test), + FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_mbx_mac_addr), + FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf), + FM10K_VF_MSG_1588_HANDLER(fm10k_1588_msg_vf), + FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error), +}; + +static int fm10k_mbx_request_irq_vf(struct fm10k_intfc *interface) +{ + struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR]; + struct net_device *dev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + int err; + + /* Use timer0 for interrupt moderation on the mailbox */ + u32 itr = FM10K_INT_MAP_TIMER0 | entry->entry; + + /* register mailbox handlers */ + err = hw->mbx.ops.register_handlers(&hw->mbx, vf_mbx_data); + if (err) + return err; + + /* request the IRQ */ + err = request_irq(entry->vector, fm10k_msix_mbx_vf, 0, + dev->name, interface); + if (err) { + netif_err(interface, probe, dev, + "request_irq for msix_mbx failed: %d\n", err); + return err; + } + + /* map all of the interrupt sources */ + fm10k_write_reg(hw, FM10K_VFINT_MAP, itr); + + /* enable interrupt */ + fm10k_write_reg(hw, FM10K_VFITR(entry->entry), FM10K_ITR_ENABLE); + + return 0; +} + +static s32 fm10k_lport_map(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_intfc *interface; + u32 dglort_map = hw->mac.dglort_map; + s32 err; + + err = fm10k_msg_lport_map_pf(hw, results, mbx); + if (err) + return err; + + interface = container_of(hw, struct fm10k_intfc, hw); + + /* we need to reset if port count was just updated */ + if (dglort_map != hw->mac.dglort_map) + interface->flags |= FM10K_FLAG_RESET_REQUESTED; + + return 0; +} + +static s32 fm10k_update_pvid(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_intfc *interface; + u16 glort, pvid; + u32 pvid_update; + s32 err; + + err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID], + &pvid_update); + if (err) + return err; + + /* extract values from the pvid update */ + glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT); + pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID); + + /* if glort is not valid return error */ + if (!fm10k_glort_valid_pf(hw, glort)) + return FM10K_ERR_PARAM; + + /* verify VID is valid */ + if (pvid >= FM10K_VLAN_TABLE_VID_MAX) + return FM10K_ERR_PARAM; + + interface = container_of(hw, struct fm10k_intfc, hw); + + /* check to see if this belongs to one of the VFs */ + err = fm10k_iov_update_pvid(interface, glort, pvid); + if (!err) + return 0; + + /* we need to reset if default VLAN was just updated */ + if (pvid != hw->mac.default_vid) + interface->flags |= FM10K_FLAG_RESET_REQUESTED; + + hw->mac.default_vid = pvid; + + return 0; +} + +static s32 fm10k_1588_msg_pf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_swapi_1588_timestamp timestamp; + struct fm10k_iov_data *iov_data; + struct fm10k_intfc *interface; + u16 sglort, vf_idx; + s32 err; + + err = fm10k_tlv_attr_get_le_struct( + results[FM10K_PF_ATTR_ID_1588_TIMESTAMP], + ×tamp, sizeof(timestamp)); + if (err) + return err; + + interface = container_of(hw, struct fm10k_intfc, hw); + + if (timestamp.dglort) { + fm10k_ts_tx_hwtstamp(interface, timestamp.dglort, + le64_to_cpu(timestamp.egress)); + return 0; + } + + /* either dglort or sglort must be set */ + if (!timestamp.sglort) + return FM10K_ERR_PARAM; + + /* verify GLORT is at least one of the ones we own */ + sglort = le16_to_cpu(timestamp.sglort); + if (!fm10k_glort_valid_pf(hw, sglort)) + return FM10K_ERR_PARAM; + + if (sglort == interface->glort) { + fm10k_ts_tx_hwtstamp(interface, 0, + le64_to_cpu(timestamp.ingress)); + return 0; + } + + /* if there is no iov_data then there is no mailboxes to process */ + if (!ACCESS_ONCE(interface->iov_data)) + return FM10K_ERR_PARAM; + + rcu_read_lock(); + + /* notify VF if this timestamp belongs to it */ + iov_data = interface->iov_data; + vf_idx = (hw->mac.dglort_map & FM10K_DGLORTMAP_NONE) - sglort; + + if (!iov_data || vf_idx >= iov_data->num_vfs) { + err = FM10K_ERR_PARAM; + goto err_unlock; + } + + err = hw->iov.ops.report_timestamp(hw, &iov_data->vf_info[vf_idx], + le64_to_cpu(timestamp.ingress)); + +err_unlock: + rcu_read_unlock(); + + return err; +} + +static const struct fm10k_msg_data pf_mbx_data[] = { + FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf), + FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf), + FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_lport_map), + FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf), + FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf), + FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_update_pvid), + FM10K_PF_MSG_1588_TIMESTAMP_HANDLER(fm10k_1588_msg_pf), + FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error), +}; + +static int fm10k_mbx_request_irq_pf(struct fm10k_intfc *interface) +{ + struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR]; + struct net_device *dev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + int err; + + /* Use timer0 for interrupt moderation on the mailbox */ + u32 mbx_itr = FM10K_INT_MAP_TIMER0 | entry->entry; + u32 other_itr = FM10K_INT_MAP_IMMEDIATE | entry->entry; + + /* register mailbox handlers */ + err = hw->mbx.ops.register_handlers(&hw->mbx, pf_mbx_data); + if (err) + return err; + + /* request the IRQ */ + err = request_irq(entry->vector, fm10k_msix_mbx_pf, 0, + dev->name, interface); + if (err) { + netif_err(interface, probe, dev, + "request_irq for msix_mbx failed: %d\n", err); + return err; + } + + /* Enable interrupts w/ no moderation for "other" interrupts */ + fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_PCIeFault), other_itr); + fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_SwitchUpDown), other_itr); + fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_SRAM), other_itr); + fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_MaxHoldTime), other_itr); + fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_VFLR), other_itr); + + /* Enable interrupts w/ moderation for mailbox */ + fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_Mailbox), mbx_itr); + + /* Enable individual interrupt causes */ + fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) | + FM10K_EIMR_ENABLE(FUM_FAULT) | + FM10K_EIMR_ENABLE(MAILBOX) | + FM10K_EIMR_ENABLE(SWITCHREADY) | + FM10K_EIMR_ENABLE(SWITCHNOTREADY) | + FM10K_EIMR_ENABLE(SRAMERROR) | + FM10K_EIMR_ENABLE(VFLR) | + FM10K_EIMR_ENABLE(MAXHOLDTIME)); + + /* enable interrupt */ + fm10k_write_reg(hw, FM10K_ITR(entry->entry), FM10K_ITR_ENABLE); + + return 0; +} + +int fm10k_mbx_request_irq(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + int err; + + /* enable Mailbox cause */ + if (hw->mac.type == fm10k_mac_pf) + err = fm10k_mbx_request_irq_pf(interface); + else + err = fm10k_mbx_request_irq_vf(interface); + + /* connect mailbox */ + if (!err) + err = hw->mbx.ops.connect(hw, &hw->mbx); + + return err; +} + +/** + * fm10k_qv_free_irq - release interrupts associated with queue vectors + * @interface: board private structure + * + * Release all interrupts associated with this interface + **/ +void fm10k_qv_free_irq(struct fm10k_intfc *interface) +{ + int vector = interface->num_q_vectors; + struct fm10k_hw *hw = &interface->hw; + struct msix_entry *entry; + + entry = &interface->msix_entries[NON_Q_VECTORS(hw) + vector]; + + while (vector) { + struct fm10k_q_vector *q_vector; + + vector--; + entry--; + q_vector = interface->q_vector[vector]; + + if (!q_vector->tx.count && !q_vector->rx.count) + continue; + + /* disable interrupts */ + + writel(FM10K_ITR_MASK_SET, q_vector->itr); + + free_irq(entry->vector, q_vector); + } +} + +/** + * fm10k_qv_request_irq - initialize interrupts for queue vectors + * @interface: board private structure + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +int fm10k_qv_request_irq(struct fm10k_intfc *interface) +{ + struct net_device *dev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + struct msix_entry *entry; + int ri = 0, ti = 0; + int vector, err; + + entry = &interface->msix_entries[NON_Q_VECTORS(hw)]; + + for (vector = 0; vector < interface->num_q_vectors; vector++) { + struct fm10k_q_vector *q_vector = interface->q_vector[vector]; + + /* name the vector */ + if (q_vector->tx.count && q_vector->rx.count) { + snprintf(q_vector->name, sizeof(q_vector->name) - 1, + "%s-TxRx-%d", dev->name, ri++); + ti++; + } else if (q_vector->rx.count) { + snprintf(q_vector->name, sizeof(q_vector->name) - 1, + "%s-rx-%d", dev->name, ri++); + } else if (q_vector->tx.count) { + snprintf(q_vector->name, sizeof(q_vector->name) - 1, + "%s-tx-%d", dev->name, ti++); + } else { + /* skip this unused q_vector */ + continue; + } + + /* Assign ITR register to q_vector */ + q_vector->itr = (hw->mac.type == fm10k_mac_pf) ? + &interface->uc_addr[FM10K_ITR(entry->entry)] : + &interface->uc_addr[FM10K_VFITR(entry->entry)]; + + /* request the IRQ */ + err = request_irq(entry->vector, &fm10k_msix_clean_rings, 0, + q_vector->name, q_vector); + if (err) { + netif_err(interface, probe, dev, + "request_irq failed for MSIX interrupt Error: %d\n", + err); + goto err_out; + } + + /* Enable q_vector */ + writel(FM10K_ITR_ENABLE, q_vector->itr); + + entry++; + } + + return 0; + +err_out: + /* wind through the ring freeing all entries and vectors */ + while (vector) { + struct fm10k_q_vector *q_vector; + + entry--; + vector--; + q_vector = interface->q_vector[vector]; + + if (!q_vector->tx.count && !q_vector->rx.count) + continue; + + /* disable interrupts */ + + writel(FM10K_ITR_MASK_SET, q_vector->itr); + + free_irq(entry->vector, q_vector); + } + + return err; +} + +void fm10k_up(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + + /* Enable Tx/Rx DMA */ + hw->mac.ops.start_hw(hw); + + /* configure Tx descriptor rings */ + fm10k_configure_tx(interface); + + /* configure Rx descriptor rings */ + fm10k_configure_rx(interface); + + /* configure interrupts */ + hw->mac.ops.update_int_moderator(hw); + + /* clear down bit to indicate we are ready to go */ + clear_bit(__FM10K_DOWN, &interface->state); + + /* enable polling cleanups */ + fm10k_napi_enable_all(interface); + + /* re-establish Rx filters */ + fm10k_restore_rx_state(interface); + + /* enable transmits */ + netif_tx_start_all_queues(interface->netdev); + + /* kick off the service timer */ + mod_timer(&interface->service_timer, jiffies); +} + +static void fm10k_napi_disable_all(struct fm10k_intfc *interface) +{ + struct fm10k_q_vector *q_vector; + int q_idx; + + for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) { + q_vector = interface->q_vector[q_idx]; + napi_disable(&q_vector->napi); + } +} + +void fm10k_down(struct fm10k_intfc *interface) +{ + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + + /* signal that we are down to the interrupt handler and service task */ + set_bit(__FM10K_DOWN, &interface->state); + + /* call carrier off first to avoid false dev_watchdog timeouts */ + netif_carrier_off(netdev); + + /* disable transmits */ + netif_tx_stop_all_queues(netdev); + netif_tx_disable(netdev); + + /* reset Rx filters */ + fm10k_reset_rx_state(interface); + + /* allow 10ms for device to quiesce */ + usleep_range(10000, 20000); + + /* disable polling routines */ + fm10k_napi_disable_all(interface); + + del_timer_sync(&interface->service_timer); + + /* capture stats one last time before stopping interface */ + fm10k_update_stats(interface); + + /* Disable DMA engine for Tx/Rx */ + hw->mac.ops.stop_hw(hw); + + /* free any buffers still on the rings */ + fm10k_clean_all_tx_rings(interface); +} + +/** + * fm10k_sw_init - Initialize general software structures + * @interface: host interface private structure to initialize + * + * fm10k_sw_init initializes the interface private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int fm10k_sw_init(struct fm10k_intfc *interface, + const struct pci_device_id *ent) +{ + static const u32 seed[FM10K_RSSRK_SIZE] = { 0xda565a6d, 0xc20e5b25, + 0x3d256741, 0xb08fa343, + 0xcb2bcad0, 0xb4307bae, + 0xa32dcb77, 0x0cf23080, + 0x3bb7426a, 0xfa01acbe }; + const struct fm10k_info *fi = fm10k_info_tbl[ent->driver_data]; + struct fm10k_hw *hw = &interface->hw; + struct pci_dev *pdev = interface->pdev; + struct net_device *netdev = interface->netdev; + unsigned int rss; + int err; + + /* initialize back pointer */ + hw->back = interface; + hw->hw_addr = interface->uc_addr; + + /* PCI config space info */ + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->revision_id = pdev->revision; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + + /* Setup hw api */ + memcpy(&hw->mac.ops, fi->mac_ops, sizeof(hw->mac.ops)); + hw->mac.type = fi->mac; + + /* Setup IOV handlers */ + if (fi->iov_ops) + memcpy(&hw->iov.ops, fi->iov_ops, sizeof(hw->iov.ops)); + + /* Set common capability flags and settings */ + rss = min_t(int, FM10K_MAX_RSS_INDICES, num_online_cpus()); + interface->ring_feature[RING_F_RSS].limit = rss; + fi->get_invariants(hw); + + /* pick up the PCIe bus settings for reporting later */ + if (hw->mac.ops.get_bus_info) + hw->mac.ops.get_bus_info(hw); + + /* limit the usable DMA range */ + if (hw->mac.ops.set_dma_mask) + hw->mac.ops.set_dma_mask(hw, dma_get_mask(&pdev->dev)); + + /* update netdev with DMA restrictions */ + if (dma_get_mask(&pdev->dev) > DMA_BIT_MASK(32)) { + netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features |= NETIF_F_HIGHDMA; + } + + /* delay any future reset requests */ + interface->last_reset = jiffies + (10 * HZ); + + /* reset and initialize the hardware so it is in a known state */ + err = hw->mac.ops.reset_hw(hw) ? : hw->mac.ops.init_hw(hw); + if (err) { + dev_err(&pdev->dev, "init_hw failed: %d\n", err); + return err; + } + + /* initialize hardware statistics */ + hw->mac.ops.update_hw_stats(hw, &interface->stats); + + /* Set upper limit on IOV VFs that can be allocated */ + pci_sriov_set_totalvfs(pdev, hw->iov.total_vfs); + + /* Start with random Ethernet address */ + eth_random_addr(hw->mac.addr); + + /* Initialize MAC address from hardware */ + err = hw->mac.ops.read_mac_addr(hw); + if (err) { + dev_warn(&pdev->dev, + "Failed to obtain MAC address defaulting to random\n"); + /* tag address assignment as random */ + netdev->addr_assign_type |= NET_ADDR_RANDOM; + } + + memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len); + memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len); + + if (!is_valid_ether_addr(netdev->perm_addr)) { + dev_err(&pdev->dev, "Invalid MAC Address\n"); + return -EIO; + } + + /* assign BAR 4 resources for use with PTP */ + if (fm10k_read_reg(hw, FM10K_CTRL) & FM10K_CTRL_BAR4_ALLOWED) + interface->sw_addr = ioremap(pci_resource_start(pdev, 4), + pci_resource_len(pdev, 4)); + hw->sw_addr = interface->sw_addr; + + /* Only the PF can support VXLAN and NVGRE offloads */ + if (hw->mac.type != fm10k_mac_pf) { + netdev->hw_enc_features = 0; + netdev->features &= ~NETIF_F_GSO_UDP_TUNNEL; + netdev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL; + } + + /* initialize DCBNL interface */ + fm10k_dcbnl_set_ops(netdev); + + /* Initialize service timer and service task */ + set_bit(__FM10K_SERVICE_DISABLE, &interface->state); + setup_timer(&interface->service_timer, &fm10k_service_timer, + (unsigned long)interface); + INIT_WORK(&interface->service_task, fm10k_service_task); + + /* Intitialize timestamp data */ + fm10k_ts_init(interface); + + /* set default ring sizes */ + interface->tx_ring_count = FM10K_DEFAULT_TXD; + interface->rx_ring_count = FM10K_DEFAULT_RXD; + + /* set default interrupt moderation */ + interface->tx_itr = FM10K_ITR_10K; + interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_ITR_20K; + + /* initialize vxlan_port list */ + INIT_LIST_HEAD(&interface->vxlan_port); + + /* initialize RSS key */ + memcpy(interface->rssrk, seed, sizeof(seed)); + + /* Start off interface as being down */ + set_bit(__FM10K_DOWN, &interface->state); + + return 0; +} + +static void fm10k_slot_warn(struct fm10k_intfc *interface) +{ + struct device *dev = &interface->pdev->dev; + struct fm10k_hw *hw = &interface->hw; + + if (hw->mac.ops.is_slot_appropriate(hw)) + return; + + dev_warn(dev, + "For optimal performance, a %s %s slot is recommended.\n", + (hw->bus_caps.width == fm10k_bus_width_pcie_x1 ? "x1" : + hw->bus_caps.width == fm10k_bus_width_pcie_x4 ? "x4" : + "x8"), + (hw->bus_caps.speed == fm10k_bus_speed_2500 ? "2.5GT/s" : + hw->bus_caps.speed == fm10k_bus_speed_5000 ? "5.0GT/s" : + "8.0GT/s")); + dev_warn(dev, + "A slot with more lanes and/or higher speed is suggested.\n"); +} + +/** + * fm10k_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in fm10k_pci_tbl + * + * Returns 0 on success, negative on failure + * + * fm10k_probe initializes an interface identified by a pci_dev structure. + * The OS initialization, configuring of the interface private structure, + * and a hardware reset occur. + **/ +static int fm10k_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct fm10k_intfc *interface; + struct fm10k_hw *hw; + int err; + u64 dma_mask; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + /* By default fm10k only supports a 48 bit DMA mask */ + dma_mask = DMA_BIT_MASK(48) | dma_get_required_mask(&pdev->dev); + + if ((dma_mask <= DMA_BIT_MASK(32)) || + dma_set_mask_and_coherent(&pdev->dev, dma_mask)) { + dma_mask &= DMA_BIT_MASK(32); + + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_dma; + } + } + } + + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, + IORESOURCE_MEM), + fm10k_driver_name); + if (err) { + dev_err(&pdev->dev, + "pci_request_selected_regions failed 0x%x\n", err); + goto err_pci_reg; + } + + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + pci_save_state(pdev); + + netdev = fm10k_alloc_netdev(); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_netdev; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + + interface = netdev_priv(netdev); + pci_set_drvdata(pdev, interface); + + interface->netdev = netdev; + interface->pdev = pdev; + hw = &interface->hw; + + interface->uc_addr = ioremap(pci_resource_start(pdev, 0), + FM10K_UC_ADDR_SIZE); + if (!interface->uc_addr) { + err = -EIO; + goto err_ioremap; + } + + err = fm10k_sw_init(interface, ent); + if (err) + goto err_sw_init; + + /* enable debugfs support */ + fm10k_dbg_intfc_init(interface); + + err = fm10k_init_queueing_scheme(interface); + if (err) + goto err_sw_init; + + err = fm10k_mbx_request_irq(interface); + if (err) + goto err_mbx_interrupt; + + /* final check of hardware state before registering the interface */ + err = fm10k_hw_ready(interface); + if (err) + goto err_register; + + err = register_netdev(netdev); + if (err) + goto err_register; + + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + + /* stop all the transmit queues from transmitting until link is up */ + netif_tx_stop_all_queues(netdev); + + /* Register PTP interface */ + fm10k_ptp_register(interface); + + /* print bus type/speed/width info */ + dev_info(&pdev->dev, "(PCI Express:%s Width: %s Payload: %s)\n", + (hw->bus.speed == fm10k_bus_speed_8000 ? "8.0GT/s" : + hw->bus.speed == fm10k_bus_speed_5000 ? "5.0GT/s" : + hw->bus.speed == fm10k_bus_speed_2500 ? "2.5GT/s" : + "Unknown"), + (hw->bus.width == fm10k_bus_width_pcie_x8 ? "x8" : + hw->bus.width == fm10k_bus_width_pcie_x4 ? "x4" : + hw->bus.width == fm10k_bus_width_pcie_x1 ? "x1" : + "Unknown"), + (hw->bus.payload == fm10k_bus_payload_128 ? "128B" : + hw->bus.payload == fm10k_bus_payload_256 ? "256B" : + hw->bus.payload == fm10k_bus_payload_512 ? "512B" : + "Unknown")); + + /* print warning for non-optimal configurations */ + fm10k_slot_warn(interface); + + /* enable SR-IOV after registering netdev to enforce PF/VF ordering */ + fm10k_iov_configure(pdev, 0); + + /* clear the service task disable bit to allow service task to start */ + clear_bit(__FM10K_SERVICE_DISABLE, &interface->state); + + return 0; + +err_register: + fm10k_mbx_free_irq(interface); +err_mbx_interrupt: + fm10k_clear_queueing_scheme(interface); +err_sw_init: + if (interface->sw_addr) + iounmap(interface->sw_addr); + iounmap(interface->uc_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_netdev: + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/** + * fm10k_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * fm10k_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void fm10k_remove(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + + set_bit(__FM10K_SERVICE_DISABLE, &interface->state); + cancel_work_sync(&interface->service_task); + + /* free netdev, this may bounce the interrupts due to setup_tc */ + if (netdev->reg_state == NETREG_REGISTERED) + unregister_netdev(netdev); + + /* cleanup timestamp handling */ + fm10k_ptp_unregister(interface); + + /* release VFs */ + fm10k_iov_disable(pdev); + + /* disable mailbox interrupt */ + fm10k_mbx_free_irq(interface); + + /* free interrupts */ + fm10k_clear_queueing_scheme(interface); + + /* remove any debugfs interfaces */ + fm10k_dbg_intfc_exit(interface); + + if (interface->sw_addr) + iounmap(interface->sw_addr); + iounmap(interface->uc_addr); + + free_netdev(netdev); + + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); + + pci_disable_pcie_error_reporting(pdev); + + pci_disable_device(pdev); +} + +#ifdef CONFIG_PM +/** + * fm10k_resume - Restore device to pre-sleep state + * @pdev: PCI device information struct + * + * fm10k_resume is called after the system has powered back up from a sleep + * state and is ready to resume operation. This function is meant to restore + * the device back to its pre-sleep state. + **/ +static int fm10k_resume(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + /* pci_restore_state clears dev->state_saved so call + * pci_save_state to restore it. + */ + pci_save_state(pdev); + + err = pci_enable_device_mem(pdev); + if (err) { + dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n"); + return err; + } + pci_set_master(pdev); + + pci_wake_from_d3(pdev, false); + + /* refresh hw_addr in case it was dropped */ + hw->hw_addr = interface->uc_addr; + + /* reset hardware to known state */ + err = hw->mac.ops.init_hw(&interface->hw); + if (err) + return err; + + /* reset statistics starting values */ + hw->mac.ops.rebind_hw_stats(hw, &interface->stats); + + /* reset clock */ + fm10k_ts_reset(interface); + + rtnl_lock(); + + err = fm10k_init_queueing_scheme(interface); + if (!err) { + fm10k_mbx_request_irq(interface); + if (netif_running(netdev)) + err = fm10k_open(netdev); + } + + rtnl_unlock(); + + if (err) + return err; + + /* restore SR-IOV interface */ + fm10k_iov_resume(pdev); + + netif_device_attach(netdev); + + return 0; +} + +/** + * fm10k_suspend - Prepare the device for a system sleep state + * @pdev: PCI device information struct + * + * fm10k_suspend is meant to shutdown the device prior to the system entering + * a sleep state. The fm10k hardware does not support wake on lan so the + * driver simply needs to shut down the device so it is in a low power state. + **/ +static int fm10k_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + int err = 0; + + netif_device_detach(netdev); + + fm10k_iov_suspend(pdev); + + rtnl_lock(); + + if (netif_running(netdev)) + fm10k_close(netdev); + + fm10k_mbx_free_irq(interface); + + fm10k_clear_queueing_scheme(interface); + + rtnl_unlock(); + + err = pci_save_state(pdev); + if (err) + return err; + + pci_disable_device(pdev); + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +#endif /* CONFIG_PM */ +/** + * fm10k_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + + netif_device_detach(netdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (netif_running(netdev)) + fm10k_close(netdev); + + fm10k_mbx_free_irq(interface); + + pci_disable_device(pdev); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * fm10k_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t fm10k_io_slot_reset(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + pci_ers_result_t result; + + if (pci_enable_device_mem(pdev)) { + dev_err(&pdev->dev, + "Cannot re-enable PCI device after reset.\n"); + result = PCI_ERS_RESULT_DISCONNECT; + } else { + pci_set_master(pdev); + pci_restore_state(pdev); + + /* After second error pci->state_saved is false, this + * resets it so EEH doesn't break. + */ + pci_save_state(pdev); + + pci_wake_from_d3(pdev, false); + + /* refresh hw_addr in case it was dropped */ + interface->hw.hw_addr = interface->uc_addr; + + interface->flags |= FM10K_FLAG_RESET_REQUESTED; + fm10k_service_event_schedule(interface); + + result = PCI_ERS_RESULT_RECOVERED; + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + + return result; +} + +/** + * fm10k_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void fm10k_io_resume(struct pci_dev *pdev) +{ + struct fm10k_intfc *interface = pci_get_drvdata(pdev); + struct net_device *netdev = interface->netdev; + struct fm10k_hw *hw = &interface->hw; + int err = 0; + + /* reset hardware to known state */ + hw->mac.ops.init_hw(&interface->hw); + + /* reset statistics starting values */ + hw->mac.ops.rebind_hw_stats(hw, &interface->stats); + + /* reassociate interrupts */ + fm10k_mbx_request_irq(interface); + + /* reset clock */ + fm10k_ts_reset(interface); + + if (netif_running(netdev)) + err = fm10k_open(netdev); + + /* final check of hardware state before registering the interface */ + err = err ? : fm10k_hw_ready(interface); + + if (!err) + netif_device_attach(netdev); +} + +static const struct pci_error_handlers fm10k_err_handler = { + .error_detected = fm10k_io_error_detected, + .slot_reset = fm10k_io_slot_reset, + .resume = fm10k_io_resume, +}; + +static struct pci_driver fm10k_driver = { + .name = fm10k_driver_name, + .id_table = fm10k_pci_tbl, + .probe = fm10k_probe, + .remove = fm10k_remove, +#ifdef CONFIG_PM + .suspend = fm10k_suspend, + .resume = fm10k_resume, +#endif + .sriov_configure = fm10k_iov_configure, + .err_handler = &fm10k_err_handler +}; + +/** + * fm10k_register_pci_driver - register driver interface + * + * This funciton is called on module load in order to register the driver. + **/ +int fm10k_register_pci_driver(void) +{ + return pci_register_driver(&fm10k_driver); +} + +/** + * fm10k_unregister_pci_driver - unregister driver interface + * + * This funciton is called on module unload in order to remove the driver. + **/ +void fm10k_unregister_pci_driver(void) +{ + pci_unregister_driver(&fm10k_driver); +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c new file mode 100644 index 00000000000..275423d4f77 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c @@ -0,0 +1,1880 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k_pf.h" +#include "fm10k_vf.h" + +/** + * fm10k_reset_hw_pf - PF hardware reset + * @hw: pointer to hardware structure + * + * This function should return the hardware to a state similar to the + * one it is in after being powered on. + **/ +static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw) +{ + s32 err; + u32 reg; + u16 i; + + /* Disable interrupts */ + fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_DISABLE(ALL)); + + /* Lock ITR2 reg 0 into itself and disable interrupt moderation */ + fm10k_write_reg(hw, FM10K_ITR2(0), 0); + fm10k_write_reg(hw, FM10K_INT_CTRL, 0); + + /* We assume here Tx and Rx queue 0 are owned by the PF */ + + /* Shut off VF access to their queues forcing them to queue 0 */ + for (i = 0; i < FM10K_TQMAP_TABLE_SIZE; i++) { + fm10k_write_reg(hw, FM10K_TQMAP(i), 0); + fm10k_write_reg(hw, FM10K_RQMAP(i), 0); + } + + /* shut down all rings */ + err = fm10k_disable_queues_generic(hw, FM10K_MAX_QUEUES); + if (err) + return err; + + /* Verify that DMA is no longer active */ + reg = fm10k_read_reg(hw, FM10K_DMA_CTRL); + if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE)) + return FM10K_ERR_DMA_PENDING; + + /* Inititate data path reset */ + reg |= FM10K_DMA_CTRL_DATAPATH_RESET; + fm10k_write_reg(hw, FM10K_DMA_CTRL, reg); + + /* Flush write and allow 100us for reset to complete */ + fm10k_write_flush(hw); + udelay(FM10K_RESET_TIMEOUT); + + /* Verify we made it out of reset */ + reg = fm10k_read_reg(hw, FM10K_IP); + if (!(reg & FM10K_IP_NOTINRESET)) + err = FM10K_ERR_RESET_FAILED; + + return err; +} + +/** + * fm10k_is_ari_hierarchy_pf - Indicate ARI hierarchy support + * @hw: pointer to hardware structure + * + * Looks at the ARI hierarchy bit to determine whether ARI is supported or not. + **/ +static bool fm10k_is_ari_hierarchy_pf(struct fm10k_hw *hw) +{ + u16 sriov_ctrl = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_SRIOV_CTRL); + + return !!(sriov_ctrl & FM10K_PCIE_SRIOV_CTRL_VFARI); +} + +/** + * fm10k_init_hw_pf - PF hardware initialization + * @hw: pointer to hardware structure + * + **/ +static s32 fm10k_init_hw_pf(struct fm10k_hw *hw) +{ + u32 dma_ctrl, txqctl; + u16 i; + + /* Establish default VSI as valid */ + fm10k_write_reg(hw, FM10K_DGLORTDEC(fm10k_dglort_default), 0); + fm10k_write_reg(hw, FM10K_DGLORTMAP(fm10k_dglort_default), + FM10K_DGLORTMAP_ANY); + + /* Invalidate all other GLORT entries */ + for (i = 1; i < FM10K_DGLORT_COUNT; i++) + fm10k_write_reg(hw, FM10K_DGLORTMAP(i), FM10K_DGLORTMAP_NONE); + + /* reset ITR2(0) to point to itself */ + fm10k_write_reg(hw, FM10K_ITR2(0), 0); + + /* reset VF ITR2(0) to point to 0 avoid PF registers */ + fm10k_write_reg(hw, FM10K_ITR2(FM10K_ITR_REG_COUNT_PF), 0); + + /* loop through all PF ITR2 registers pointing them to the previous */ + for (i = 1; i < FM10K_ITR_REG_COUNT_PF; i++) + fm10k_write_reg(hw, FM10K_ITR2(i), i - 1); + + /* Enable interrupt moderator if not already enabled */ + fm10k_write_reg(hw, FM10K_INT_CTRL, FM10K_INT_CTRL_ENABLEMODERATOR); + + /* compute the default txqctl configuration */ + txqctl = FM10K_TXQCTL_PF | FM10K_TXQCTL_UNLIMITED_BW | + (hw->mac.default_vid << FM10K_TXQCTL_VID_SHIFT); + + for (i = 0; i < FM10K_MAX_QUEUES; i++) { + /* configure rings for 256 Queue / 32 Descriptor cache mode */ + fm10k_write_reg(hw, FM10K_TQDLOC(i), + (i * FM10K_TQDLOC_BASE_32_DESC) | + FM10K_TQDLOC_SIZE_32_DESC); + fm10k_write_reg(hw, FM10K_TXQCTL(i), txqctl); + + /* configure rings to provide TPH processing hints */ + fm10k_write_reg(hw, FM10K_TPH_TXCTRL(i), + FM10K_TPH_TXCTRL_DESC_TPHEN | + FM10K_TPH_TXCTRL_DESC_RROEN | + FM10K_TPH_TXCTRL_DESC_WROEN | + FM10K_TPH_TXCTRL_DATA_RROEN); + fm10k_write_reg(hw, FM10K_TPH_RXCTRL(i), + FM10K_TPH_RXCTRL_DESC_TPHEN | + FM10K_TPH_RXCTRL_DESC_RROEN | + FM10K_TPH_RXCTRL_DATA_WROEN | + FM10K_TPH_RXCTRL_HDR_WROEN); + } + + /* set max hold interval to align with 1.024 usec in all modes */ + switch (hw->bus.speed) { + case fm10k_bus_speed_2500: + dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN1; + break; + case fm10k_bus_speed_5000: + dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN2; + break; + case fm10k_bus_speed_8000: + dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN3; + break; + default: + dma_ctrl = 0; + break; + } + + /* Configure TSO flags */ + fm10k_write_reg(hw, FM10K_DTXTCPFLGL, FM10K_TSO_FLAGS_LOW); + fm10k_write_reg(hw, FM10K_DTXTCPFLGH, FM10K_TSO_FLAGS_HI); + + /* Enable DMA engine + * Set Rx Descriptor size to 32 + * Set Minimum MSS to 64 + * Set Maximum number of Rx queues to 256 / 32 Descriptor + */ + dma_ctrl |= FM10K_DMA_CTRL_TX_ENABLE | FM10K_DMA_CTRL_RX_ENABLE | + FM10K_DMA_CTRL_RX_DESC_SIZE | FM10K_DMA_CTRL_MINMSS_64 | + FM10K_DMA_CTRL_32_DESC; + + fm10k_write_reg(hw, FM10K_DMA_CTRL, dma_ctrl); + + /* record maximum queue count, we limit ourselves to 128 */ + hw->mac.max_queues = FM10K_MAX_QUEUES_PF; + + /* We support either 64 VFs or 7 VFs depending on if we have ARI */ + hw->iov.total_vfs = fm10k_is_ari_hierarchy_pf(hw) ? 64 : 7; + + return 0; +} + +/** + * fm10k_is_slot_appropriate_pf - Indicate appropriate slot for this SKU + * @hw: pointer to hardware structure + * + * Looks at the PCIe bus info to confirm whether or not this slot can support + * the necessary bandwidth for this device. + **/ +static bool fm10k_is_slot_appropriate_pf(struct fm10k_hw *hw) +{ + return (hw->bus.speed == hw->bus_caps.speed) && + (hw->bus.width == hw->bus_caps.width); +} + +/** + * fm10k_update_vlan_pf - Update status of VLAN ID in VLAN filter table + * @hw: pointer to hardware structure + * @vid: VLAN ID to add to table + * @vsi: Index indicating VF ID or PF ID in table + * @set: Indicates if this is a set or clear operation + * + * This function adds or removes the corresponding VLAN ID from the VLAN + * filter table for the corresponding function. In addition to the + * standard set/clear that supports one bit a multi-bit write is + * supported to set 64 bits at a time. + **/ +static s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set) +{ + u32 vlan_table, reg, mask, bit, len; + + /* verify the VSI index is valid */ + if (vsi > FM10K_VLAN_TABLE_VSI_MAX) + return FM10K_ERR_PARAM; + + /* VLAN multi-bit write: + * The multi-bit write has several parts to it. + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | RSVD0 | Length |C|RSVD0| VLAN ID | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * VLAN ID: Vlan Starting value + * RSVD0: Reserved section, must be 0 + * C: Flag field, 0 is set, 1 is clear (Used in VF VLAN message) + * Length: Number of times to repeat the bit being set + */ + len = vid >> 16; + vid = (vid << 17) >> 17; + + /* verify the reserved 0 fields are 0 */ + if (len >= FM10K_VLAN_TABLE_VID_MAX || + vid >= FM10K_VLAN_TABLE_VID_MAX) + return FM10K_ERR_PARAM; + + /* Loop through the table updating all required VLANs */ + for (reg = FM10K_VLAN_TABLE(vsi, vid / 32), bit = vid % 32; + len < FM10K_VLAN_TABLE_VID_MAX; + len -= 32 - bit, reg++, bit = 0) { + /* record the initial state of the register */ + vlan_table = fm10k_read_reg(hw, reg); + + /* truncate mask if we are at the start or end of the run */ + mask = (~(u32)0 >> ((len < 31) ? 31 - len : 0)) << bit; + + /* make necessary modifications to the register */ + mask &= set ? ~vlan_table : vlan_table; + if (mask) + fm10k_write_reg(hw, reg, vlan_table ^ mask); + } + + return 0; +} + +/** + * fm10k_read_mac_addr_pf - Read device MAC address + * @hw: pointer to the HW structure + * + * Reads the device MAC address from the SM_AREA and stores the value. + **/ +static s32 fm10k_read_mac_addr_pf(struct fm10k_hw *hw) +{ + u8 perm_addr[ETH_ALEN]; + u32 serial_num; + int i; + + serial_num = fm10k_read_reg(hw, FM10K_SM_AREA(1)); + + /* last byte should be all 1's */ + if ((~serial_num) << 24) + return FM10K_ERR_INVALID_MAC_ADDR; + + perm_addr[0] = (u8)(serial_num >> 24); + perm_addr[1] = (u8)(serial_num >> 16); + perm_addr[2] = (u8)(serial_num >> 8); + + serial_num = fm10k_read_reg(hw, FM10K_SM_AREA(0)); + + /* first byte should be all 1's */ + if ((~serial_num) >> 24) + return FM10K_ERR_INVALID_MAC_ADDR; + + perm_addr[3] = (u8)(serial_num >> 16); + perm_addr[4] = (u8)(serial_num >> 8); + perm_addr[5] = (u8)(serial_num); + + for (i = 0; i < ETH_ALEN; i++) { + hw->mac.perm_addr[i] = perm_addr[i]; + hw->mac.addr[i] = perm_addr[i]; + } + + return 0; +} + +/** + * fm10k_glort_valid_pf - Validate that the provided glort is valid + * @hw: pointer to the HW structure + * @glort: base glort to be validated + * + * This function will return an error if the provided glort is invalid + **/ +bool fm10k_glort_valid_pf(struct fm10k_hw *hw, u16 glort) +{ + glort &= hw->mac.dglort_map >> FM10K_DGLORTMAP_MASK_SHIFT; + + return glort == (hw->mac.dglort_map & FM10K_DGLORTMAP_NONE); +} + +/** + * fm10k_update_uc_addr_pf - Update device unicast addresss + * @hw: pointer to the HW structure + * @glort: base resource tag for this request + * @mac: MAC address to add/remove from table + * @vid: VLAN ID to add/remove from table + * @add: Indicates if this is an add or remove operation + * @flags: flags field to indicate add and secure + * + * This function generates a message to the Switch API requesting + * that the given logical port add/remove the given L2 MAC/VLAN address. + **/ +static s32 fm10k_update_xc_addr_pf(struct fm10k_hw *hw, u16 glort, + const u8 *mac, u16 vid, bool add, u8 flags) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + struct fm10k_mac_update mac_update; + u32 msg[5]; + + /* if glort is not valid return error */ + if (!fm10k_glort_valid_pf(hw, glort)) + return FM10K_ERR_PARAM; + + /* drop upper 4 bits of VLAN ID */ + vid = (vid << 4) >> 4; + + /* record fields */ + mac_update.mac_lower = cpu_to_le32(((u32)mac[2] << 24) | + ((u32)mac[3] << 16) | + ((u32)mac[4] << 8) | + ((u32)mac[5])); + mac_update.mac_upper = cpu_to_le16(((u32)mac[0] << 8) | + ((u32)mac[1])); + mac_update.vlan = cpu_to_le16(vid); + mac_update.glort = cpu_to_le16(glort); + mac_update.action = add ? 0 : 1; + mac_update.flags = flags; + + /* populate mac_update fields */ + fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_UPDATE_MAC_FWD_RULE); + fm10k_tlv_attr_put_le_struct(msg, FM10K_PF_ATTR_ID_MAC_UPDATE, + &mac_update, sizeof(mac_update)); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_uc_addr_pf - Update device unicast addresss + * @hw: pointer to the HW structure + * @glort: base resource tag for this request + * @mac: MAC address to add/remove from table + * @vid: VLAN ID to add/remove from table + * @add: Indicates if this is an add or remove operation + * @flags: flags field to indicate add and secure + * + * This function is used to add or remove unicast addresses for + * the PF. + **/ +static s32 fm10k_update_uc_addr_pf(struct fm10k_hw *hw, u16 glort, + const u8 *mac, u16 vid, bool add, u8 flags) +{ + /* verify MAC address is valid */ + if (!is_valid_ether_addr(mac)) + return FM10K_ERR_PARAM; + + return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, flags); +} + +/** + * fm10k_update_mc_addr_pf - Update device multicast addresses + * @hw: pointer to the HW structure + * @glort: base resource tag for this request + * @mac: MAC address to add/remove from table + * @vid: VLAN ID to add/remove from table + * @add: Indicates if this is an add or remove operation + * + * This function is used to add or remove multicast MAC addresses for + * the PF. + **/ +static s32 fm10k_update_mc_addr_pf(struct fm10k_hw *hw, u16 glort, + const u8 *mac, u16 vid, bool add) +{ + /* verify multicast address is valid */ + if (!is_multicast_ether_addr(mac)) + return FM10K_ERR_PARAM; + + return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, 0); +} + +/** + * fm10k_update_xcast_mode_pf - Request update of multicast mode + * @hw: pointer to hardware structure + * @glort: base resource tag for this request + * @mode: integer value indicating mode being requested + * + * This function will attempt to request a higher mode for the port + * so that it can enable either multicast, multicast promiscuous, or + * promiscuous mode of operation. + **/ +static s32 fm10k_update_xcast_mode_pf(struct fm10k_hw *hw, u16 glort, u8 mode) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[3], xcast_mode; + + if (mode > FM10K_XCAST_MODE_NONE) + return FM10K_ERR_PARAM; + /* if glort is not valid return error */ + if (!fm10k_glort_valid_pf(hw, glort)) + return FM10K_ERR_PARAM; + + /* write xcast mode as a single u32 value, + * lower 16 bits: glort + * upper 16 bits: mode + */ + xcast_mode = ((u32)mode << 16) | glort; + + /* generate message requesting to change xcast mode */ + fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_XCAST_MODES); + fm10k_tlv_attr_put_u32(msg, FM10K_PF_ATTR_ID_XCAST_MODE, xcast_mode); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_int_moderator_pf - Update interrupt moderator linked list + * @hw: pointer to hardware structure + * + * This function walks through the MSI-X vector table to determine the + * number of active interrupts and based on that information updates the + * interrupt moderator linked list. + **/ +static void fm10k_update_int_moderator_pf(struct fm10k_hw *hw) +{ + u32 i; + + /* Disable interrupt moderator */ + fm10k_write_reg(hw, FM10K_INT_CTRL, 0); + + /* loop through PF from last to first looking enabled vectors */ + for (i = FM10K_ITR_REG_COUNT_PF - 1; i; i--) { + if (!fm10k_read_reg(hw, FM10K_MSIX_VECTOR_MASK(i))) + break; + } + + /* always reset VFITR2[0] to point to last enabled PF vector*/ + fm10k_write_reg(hw, FM10K_ITR2(FM10K_ITR_REG_COUNT_PF), i); + + /* reset ITR2[0] to point to last enabled PF vector */ + if (!hw->iov.num_vfs) + fm10k_write_reg(hw, FM10K_ITR2(0), i); + + /* Enable interrupt moderator */ + fm10k_write_reg(hw, FM10K_INT_CTRL, FM10K_INT_CTRL_ENABLEMODERATOR); +} + +/** + * fm10k_update_lport_state_pf - Notify the switch of a change in port state + * @hw: pointer to the HW structure + * @glort: base resource tag for this request + * @count: number of logical ports being updated + * @enable: boolean value indicating enable or disable + * + * This function is used to add/remove a logical port from the switch. + **/ +static s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort, + u16 count, bool enable) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[3], lport_msg; + + /* do nothing if we are being asked to create or destroy 0 ports */ + if (!count) + return 0; + + /* if glort is not valid return error */ + if (!fm10k_glort_valid_pf(hw, glort)) + return FM10K_ERR_PARAM; + + /* construct the lport message from the 2 pieces of data we have */ + lport_msg = ((u32)count << 16) | glort; + + /* generate lport create/delete message */ + fm10k_tlv_msg_init(msg, enable ? FM10K_PF_MSG_ID_LPORT_CREATE : + FM10K_PF_MSG_ID_LPORT_DELETE); + fm10k_tlv_attr_put_u32(msg, FM10K_PF_ATTR_ID_PORT, lport_msg); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_configure_dglort_map_pf - Configures GLORT entry and queues + * @hw: pointer to hardware structure + * @dglort: pointer to dglort configuration structure + * + * Reads the configuration structure contained in dglort_cfg and uses + * that information to then populate a DGLORTMAP/DEC entry and the queues + * to which it has been assigned. + **/ +static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw, + struct fm10k_dglort_cfg *dglort) +{ + u16 glort, queue_count, vsi_count, pc_count; + u16 vsi, queue, pc, q_idx; + u32 txqctl, dglortdec, dglortmap; + + /* verify the dglort pointer */ + if (!dglort) + return FM10K_ERR_PARAM; + + /* verify the dglort values */ + if ((dglort->idx > 7) || (dglort->rss_l > 7) || (dglort->pc_l > 3) || + (dglort->vsi_l > 6) || (dglort->vsi_b > 64) || + (dglort->queue_l > 8) || (dglort->queue_b >= 256)) + return FM10K_ERR_PARAM; + + /* determine count of VSIs and queues */ + queue_count = 1 << (dglort->rss_l + dglort->pc_l); + vsi_count = 1 << (dglort->vsi_l + dglort->queue_l); + glort = dglort->glort; + q_idx = dglort->queue_b; + + /* configure SGLORT for queues */ + for (vsi = 0; vsi < vsi_count; vsi++, glort++) { + for (queue = 0; queue < queue_count; queue++, q_idx++) { + if (q_idx >= FM10K_MAX_QUEUES) + break; + + fm10k_write_reg(hw, FM10K_TX_SGLORT(q_idx), glort); + fm10k_write_reg(hw, FM10K_RX_SGLORT(q_idx), glort); + } + } + + /* determine count of PCs and queues */ + queue_count = 1 << (dglort->queue_l + dglort->rss_l + dglort->vsi_l); + pc_count = 1 << dglort->pc_l; + + /* configure PC for Tx queues */ + for (pc = 0; pc < pc_count; pc++) { + q_idx = pc + dglort->queue_b; + for (queue = 0; queue < queue_count; queue++) { + if (q_idx >= FM10K_MAX_QUEUES) + break; + + txqctl = fm10k_read_reg(hw, FM10K_TXQCTL(q_idx)); + txqctl &= ~FM10K_TXQCTL_PC_MASK; + txqctl |= pc << FM10K_TXQCTL_PC_SHIFT; + fm10k_write_reg(hw, FM10K_TXQCTL(q_idx), txqctl); + + q_idx += pc_count; + } + } + + /* configure DGLORTDEC */ + dglortdec = ((u32)(dglort->rss_l) << FM10K_DGLORTDEC_RSSLENGTH_SHIFT) | + ((u32)(dglort->queue_b) << FM10K_DGLORTDEC_QBASE_SHIFT) | + ((u32)(dglort->pc_l) << FM10K_DGLORTDEC_PCLENGTH_SHIFT) | + ((u32)(dglort->vsi_b) << FM10K_DGLORTDEC_VSIBASE_SHIFT) | + ((u32)(dglort->vsi_l) << FM10K_DGLORTDEC_VSILENGTH_SHIFT) | + ((u32)(dglort->queue_l)); + if (dglort->inner_rss) + dglortdec |= FM10K_DGLORTDEC_INNERRSS_ENABLE; + + /* configure DGLORTMAP */ + dglortmap = (dglort->idx == fm10k_dglort_default) ? + FM10K_DGLORTMAP_ANY : FM10K_DGLORTMAP_ZERO; + dglortmap <<= dglort->vsi_l + dglort->queue_l + dglort->shared_l; + dglortmap |= dglort->glort; + + /* write values to hardware */ + fm10k_write_reg(hw, FM10K_DGLORTDEC(dglort->idx), dglortdec); + fm10k_write_reg(hw, FM10K_DGLORTMAP(dglort->idx), dglortmap); + + return 0; +} + +u16 fm10k_queues_per_pool(struct fm10k_hw *hw) +{ + u16 num_pools = hw->iov.num_pools; + + return (num_pools > 32) ? 2 : (num_pools > 16) ? 4 : (num_pools > 8) ? + 8 : FM10K_MAX_QUEUES_POOL; +} + +u16 fm10k_vf_queue_index(struct fm10k_hw *hw, u16 vf_idx) +{ + u16 num_vfs = hw->iov.num_vfs; + u16 vf_q_idx = FM10K_MAX_QUEUES; + + vf_q_idx -= fm10k_queues_per_pool(hw) * (num_vfs - vf_idx); + + return vf_q_idx; +} + +static u16 fm10k_vectors_per_pool(struct fm10k_hw *hw) +{ + u16 num_pools = hw->iov.num_pools; + + return (num_pools > 32) ? 8 : (num_pools > 16) ? 16 : + FM10K_MAX_VECTORS_POOL; +} + +static u16 fm10k_vf_vector_index(struct fm10k_hw *hw, u16 vf_idx) +{ + u16 vf_v_idx = FM10K_MAX_VECTORS_PF; + + vf_v_idx += fm10k_vectors_per_pool(hw) * vf_idx; + + return vf_v_idx; +} + +/** + * fm10k_iov_assign_resources_pf - Assign pool resources for virtualization + * @hw: pointer to the HW structure + * @num_vfs: number of VFs to be allocated + * @num_pools: number of virtualization pools to be allocated + * + * Allocates queues and traffic classes to virtualization entities to prepare + * the PF for SR-IOV and VMDq + **/ +static s32 fm10k_iov_assign_resources_pf(struct fm10k_hw *hw, u16 num_vfs, + u16 num_pools) +{ + u16 qmap_stride, qpp, vpp, vf_q_idx, vf_q_idx0, qmap_idx; + u32 vid = hw->mac.default_vid << FM10K_TXQCTL_VID_SHIFT; + int i, j; + + /* hardware only supports up to 64 pools */ + if (num_pools > 64) + return FM10K_ERR_PARAM; + + /* the number of VFs cannot exceed the number of pools */ + if ((num_vfs > num_pools) || (num_vfs > hw->iov.total_vfs)) + return FM10K_ERR_PARAM; + + /* record number of virtualization entities */ + hw->iov.num_vfs = num_vfs; + hw->iov.num_pools = num_pools; + + /* determine qmap offsets and counts */ + qmap_stride = (num_vfs > 8) ? 32 : 256; + qpp = fm10k_queues_per_pool(hw); + vpp = fm10k_vectors_per_pool(hw); + + /* calculate starting index for queues */ + vf_q_idx = fm10k_vf_queue_index(hw, 0); + qmap_idx = 0; + + /* establish TCs with -1 credits and no quanta to prevent transmit */ + for (i = 0; i < num_vfs; i++) { + fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(i), 0); + fm10k_write_reg(hw, FM10K_TC_RATE(i), 0); + fm10k_write_reg(hw, FM10K_TC_CREDIT(i), + FM10K_TC_CREDIT_CREDIT_MASK); + } + + /* zero out all mbmem registers */ + for (i = FM10K_VFMBMEM_LEN * num_vfs; i--;) + fm10k_write_reg(hw, FM10K_MBMEM(i), 0); + + /* clear event notification of VF FLR */ + fm10k_write_reg(hw, FM10K_PFVFLREC(0), ~0); + fm10k_write_reg(hw, FM10K_PFVFLREC(1), ~0); + + /* loop through unallocated rings assigning them back to PF */ + for (i = FM10K_MAX_QUEUES_PF; i < vf_q_idx; i++) { + fm10k_write_reg(hw, FM10K_TXDCTL(i), 0); + fm10k_write_reg(hw, FM10K_TXQCTL(i), FM10K_TXQCTL_PF | vid); + fm10k_write_reg(hw, FM10K_RXQCTL(i), FM10K_RXQCTL_PF); + } + + /* PF should have already updated VFITR2[0] */ + + /* update all ITR registers to flow to VFITR2[0] */ + for (i = FM10K_ITR_REG_COUNT_PF + 1; i < FM10K_ITR_REG_COUNT; i++) { + if (!(i & (vpp - 1))) + fm10k_write_reg(hw, FM10K_ITR2(i), i - vpp); + else + fm10k_write_reg(hw, FM10K_ITR2(i), i - 1); + } + + /* update PF ITR2[0] to reference the last vector */ + fm10k_write_reg(hw, FM10K_ITR2(0), + fm10k_vf_vector_index(hw, num_vfs - 1)); + + /* loop through rings populating rings and TCs */ + for (i = 0; i < num_vfs; i++) { + /* record index for VF queue 0 for use in end of loop */ + vf_q_idx0 = vf_q_idx; + + for (j = 0; j < qpp; j++, qmap_idx++, vf_q_idx++) { + /* assign VF and locked TC to queues */ + fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0); + fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx), + (i << FM10K_TXQCTL_TC_SHIFT) | i | + FM10K_TXQCTL_VF | vid); + fm10k_write_reg(hw, FM10K_RXDCTL(vf_q_idx), + FM10K_RXDCTL_WRITE_BACK_MIN_DELAY | + FM10K_RXDCTL_DROP_ON_EMPTY); + fm10k_write_reg(hw, FM10K_RXQCTL(vf_q_idx), + FM10K_RXQCTL_VF | + (i << FM10K_RXQCTL_VF_SHIFT)); + + /* map queue pair to VF */ + fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx); + fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), vf_q_idx); + } + + /* repeat the first ring for all of the remaining VF rings */ + for (; j < qmap_stride; j++, qmap_idx++) { + fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx0); + fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), vf_q_idx0); + } + } + + /* loop through remaining indexes assigning all to queue 0 */ + while (qmap_idx < FM10K_TQMAP_TABLE_SIZE) { + fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0); + fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), 0); + qmap_idx++; + } + + return 0; +} + +/** + * fm10k_iov_configure_tc_pf - Configure the shaping group for VF + * @hw: pointer to the HW structure + * @vf_idx: index of VF receiving GLORT + * @rate: Rate indicated in Mb/s + * + * Configured the TC for a given VF to allow only up to a given number + * of Mb/s of outgoing Tx throughput. + **/ +static s32 fm10k_iov_configure_tc_pf(struct fm10k_hw *hw, u16 vf_idx, int rate) +{ + /* configure defaults */ + u32 interval = FM10K_TC_RATE_INTERVAL_4US_GEN3; + u32 tc_rate = FM10K_TC_RATE_QUANTA_MASK; + + /* verify vf is in range */ + if (vf_idx >= hw->iov.num_vfs) + return FM10K_ERR_PARAM; + + /* set interval to align with 4.096 usec in all modes */ + switch (hw->bus.speed) { + case fm10k_bus_speed_2500: + interval = FM10K_TC_RATE_INTERVAL_4US_GEN1; + break; + case fm10k_bus_speed_5000: + interval = FM10K_TC_RATE_INTERVAL_4US_GEN2; + break; + default: + break; + } + + if (rate) { + if (rate > FM10K_VF_TC_MAX || rate < FM10K_VF_TC_MIN) + return FM10K_ERR_PARAM; + + /* The quanta is measured in Bytes per 4.096 or 8.192 usec + * The rate is provided in Mbits per second + * To tralslate from rate to quanta we need to multiply the + * rate by 8.192 usec and divide by 8 bits/byte. To avoid + * dealing with floating point we can round the values up + * to the nearest whole number ratio which gives us 128 / 125. + */ + tc_rate = (rate * 128) / 125; + + /* try to keep the rate limiting accurate by increasing + * the number of credits and interval for rates less than 4Gb/s + */ + if (rate < 4000) + interval <<= 1; + else + tc_rate >>= 1; + } + + /* update rate limiter with new values */ + fm10k_write_reg(hw, FM10K_TC_RATE(vf_idx), tc_rate | interval); + fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(vf_idx), FM10K_TC_MAXCREDIT_64K); + fm10k_write_reg(hw, FM10K_TC_CREDIT(vf_idx), FM10K_TC_MAXCREDIT_64K); + + return 0; +} + +/** + * fm10k_iov_assign_int_moderator_pf - Add VF interrupts to moderator list + * @hw: pointer to the HW structure + * @vf_idx: index of VF receiving GLORT + * + * Update the interrupt moderator linked list to include any MSI-X + * interrupts which the VF has enabled in the MSI-X vector table. + **/ +static s32 fm10k_iov_assign_int_moderator_pf(struct fm10k_hw *hw, u16 vf_idx) +{ + u16 vf_v_idx, vf_v_limit, i; + + /* verify vf is in range */ + if (vf_idx >= hw->iov.num_vfs) + return FM10K_ERR_PARAM; + + /* determine vector offset and count*/ + vf_v_idx = fm10k_vf_vector_index(hw, vf_idx); + vf_v_limit = vf_v_idx + fm10k_vectors_per_pool(hw); + + /* search for first vector that is not masked */ + for (i = vf_v_limit - 1; i > vf_v_idx; i--) { + if (!fm10k_read_reg(hw, FM10K_MSIX_VECTOR_MASK(i))) + break; + } + + /* reset linked list so it now includes our active vectors */ + if (vf_idx == (hw->iov.num_vfs - 1)) + fm10k_write_reg(hw, FM10K_ITR2(0), i); + else + fm10k_write_reg(hw, FM10K_ITR2(vf_v_limit), i); + + return 0; +} + +/** + * fm10k_iov_assign_default_mac_vlan_pf - Assign a MAC and VLAN to VF + * @hw: pointer to the HW structure + * @vf_info: pointer to VF information structure + * + * Assign a MAC address and default VLAN to a VF and notify it of the update + **/ +static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw, + struct fm10k_vf_info *vf_info) +{ + u16 qmap_stride, queues_per_pool, vf_q_idx, timeout, qmap_idx, i; + u32 msg[4], txdctl, txqctl, tdbal = 0, tdbah = 0; + s32 err = 0; + u16 vf_idx, vf_vid; + + /* verify vf is in range */ + if (!vf_info || vf_info->vf_idx >= hw->iov.num_vfs) + return FM10K_ERR_PARAM; + + /* determine qmap offsets and counts */ + qmap_stride = (hw->iov.num_vfs > 8) ? 32 : 256; + queues_per_pool = fm10k_queues_per_pool(hw); + + /* calculate starting index for queues */ + vf_idx = vf_info->vf_idx; + vf_q_idx = fm10k_vf_queue_index(hw, vf_idx); + qmap_idx = qmap_stride * vf_idx; + + /* MAP Tx queue back to 0 temporarily, and disable it */ + fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0); + fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0); + + /* determine correct default VLAN ID */ + if (vf_info->pf_vid) + vf_vid = vf_info->pf_vid | FM10K_VLAN_CLEAR; + else + vf_vid = vf_info->sw_vid; + + /* generate MAC_ADDR request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN); + fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_DEFAULT_MAC, + vf_info->mac, vf_vid); + + /* load onto outgoing mailbox, ignore any errors on enqueue */ + if (vf_info->mbx.ops.enqueue_tx) + vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); + + /* verify ring has disabled before modifying base address registers */ + txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx)); + for (timeout = 0; txdctl & FM10K_TXDCTL_ENABLE; timeout++) { + /* limit ourselves to a 1ms timeout */ + if (timeout == 10) { + err = FM10K_ERR_DMA_PENDING; + goto err_out; + } + + usleep_range(100, 200); + txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx)); + } + + /* Update base address registers to contain MAC address */ + if (is_valid_ether_addr(vf_info->mac)) { + tdbal = (((u32)vf_info->mac[3]) << 24) | + (((u32)vf_info->mac[4]) << 16) | + (((u32)vf_info->mac[5]) << 8); + + tdbah = (((u32)0xFF) << 24) | + (((u32)vf_info->mac[0]) << 16) | + (((u32)vf_info->mac[1]) << 8) | + ((u32)vf_info->mac[2]); + } + + /* Record the base address into queue 0 */ + fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx), tdbal); + fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx), tdbah); + +err_out: + /* configure Queue control register */ + txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) & + FM10K_TXQCTL_VID_MASK; + txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) | + FM10K_TXQCTL_VF | vf_idx; + + /* assign VID */ + for (i = 0; i < queues_per_pool; i++) + fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl); + + /* restore the queue back to VF ownership */ + fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx); + return err; +} + +/** + * fm10k_iov_reset_resources_pf - Reassign queues and interrupts to a VF + * @hw: pointer to the HW structure + * @vf_info: pointer to VF information structure + * + * Reassign the interrupts and queues to a VF following an FLR + **/ +static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw, + struct fm10k_vf_info *vf_info) +{ + u16 qmap_stride, queues_per_pool, vf_q_idx, qmap_idx; + u32 tdbal = 0, tdbah = 0, txqctl, rxqctl; + u16 vf_v_idx, vf_v_limit, vf_vid; + u8 vf_idx = vf_info->vf_idx; + int i; + + /* verify vf is in range */ + if (vf_idx >= hw->iov.num_vfs) + return FM10K_ERR_PARAM; + + /* clear event notification of VF FLR */ + fm10k_write_reg(hw, FM10K_PFVFLREC(vf_idx / 32), 1 << (vf_idx % 32)); + + /* force timeout and then disconnect the mailbox */ + vf_info->mbx.timeout = 0; + if (vf_info->mbx.ops.disconnect) + vf_info->mbx.ops.disconnect(hw, &vf_info->mbx); + + /* determine vector offset and count*/ + vf_v_idx = fm10k_vf_vector_index(hw, vf_idx); + vf_v_limit = vf_v_idx + fm10k_vectors_per_pool(hw); + + /* determine qmap offsets and counts */ + qmap_stride = (hw->iov.num_vfs > 8) ? 32 : 256; + queues_per_pool = fm10k_queues_per_pool(hw); + qmap_idx = qmap_stride * vf_idx; + + /* make all the queues inaccessible to the VF */ + for (i = qmap_idx; i < (qmap_idx + qmap_stride); i++) { + fm10k_write_reg(hw, FM10K_TQMAP(i), 0); + fm10k_write_reg(hw, FM10K_RQMAP(i), 0); + } + + /* calculate starting index for queues */ + vf_q_idx = fm10k_vf_queue_index(hw, vf_idx); + + /* determine correct default VLAN ID */ + if (vf_info->pf_vid) + vf_vid = vf_info->pf_vid; + else + vf_vid = vf_info->sw_vid; + + /* configure Queue control register */ + txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) | + (vf_idx << FM10K_TXQCTL_TC_SHIFT) | + FM10K_TXQCTL_VF | vf_idx; + rxqctl = FM10K_RXQCTL_VF | (vf_idx << FM10K_RXQCTL_VF_SHIFT); + + /* stop further DMA and reset queue ownership back to VF */ + for (i = vf_q_idx; i < (queues_per_pool + vf_q_idx); i++) { + fm10k_write_reg(hw, FM10K_TXDCTL(i), 0); + fm10k_write_reg(hw, FM10K_TXQCTL(i), txqctl); + fm10k_write_reg(hw, FM10K_RXDCTL(i), + FM10K_RXDCTL_WRITE_BACK_MIN_DELAY | + FM10K_RXDCTL_DROP_ON_EMPTY); + fm10k_write_reg(hw, FM10K_RXQCTL(i), rxqctl); + } + + /* reset TC with -1 credits and no quanta to prevent transmit */ + fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(vf_idx), 0); + fm10k_write_reg(hw, FM10K_TC_RATE(vf_idx), 0); + fm10k_write_reg(hw, FM10K_TC_CREDIT(vf_idx), + FM10K_TC_CREDIT_CREDIT_MASK); + + /* update our first entry in the table based on previous VF */ + if (!vf_idx) + hw->mac.ops.update_int_moderator(hw); + else + hw->iov.ops.assign_int_moderator(hw, vf_idx - 1); + + /* reset linked list so it now includes our active vectors */ + if (vf_idx == (hw->iov.num_vfs - 1)) + fm10k_write_reg(hw, FM10K_ITR2(0), vf_v_idx); + else + fm10k_write_reg(hw, FM10K_ITR2(vf_v_limit), vf_v_idx); + + /* link remaining vectors so that next points to previous */ + for (vf_v_idx++; vf_v_idx < vf_v_limit; vf_v_idx++) + fm10k_write_reg(hw, FM10K_ITR2(vf_v_idx), vf_v_idx - 1); + + /* zero out MBMEM, VLAN_TABLE, RETA, RSSRK, and MRQC registers */ + for (i = FM10K_VFMBMEM_LEN; i--;) + fm10k_write_reg(hw, FM10K_MBMEM_VF(vf_idx, i), 0); + for (i = FM10K_VLAN_TABLE_SIZE; i--;) + fm10k_write_reg(hw, FM10K_VLAN_TABLE(vf_info->vsi, i), 0); + for (i = FM10K_RETA_SIZE; i--;) + fm10k_write_reg(hw, FM10K_RETA(vf_info->vsi, i), 0); + for (i = FM10K_RSSRK_SIZE; i--;) + fm10k_write_reg(hw, FM10K_RSSRK(vf_info->vsi, i), 0); + fm10k_write_reg(hw, FM10K_MRQC(vf_info->vsi), 0); + + /* Update base address registers to contain MAC address */ + if (is_valid_ether_addr(vf_info->mac)) { + tdbal = (((u32)vf_info->mac[3]) << 24) | + (((u32)vf_info->mac[4]) << 16) | + (((u32)vf_info->mac[5]) << 8); + tdbah = (((u32)0xFF) << 24) | + (((u32)vf_info->mac[0]) << 16) | + (((u32)vf_info->mac[1]) << 8) | + ((u32)vf_info->mac[2]); + } + + /* map queue pairs back to VF from last to first*/ + for (i = queues_per_pool; i--;) { + fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx + i), tdbal); + fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx + i), tdbah); + fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx + i); + fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx + i); + } + + return 0; +} + +/** + * fm10k_iov_set_lport_pf - Assign and enable a logical port for a given VF + * @hw: pointer to hardware structure + * @vf_info: pointer to VF information structure + * @lport_idx: Logical port offset from the hardware glort + * @flags: Set of capability flags to extend port beyond basic functionality + * + * This function allows enabling a VF port by assigning it a GLORT and + * setting the flags so that it can enable an Rx mode. + **/ +static s32 fm10k_iov_set_lport_pf(struct fm10k_hw *hw, + struct fm10k_vf_info *vf_info, + u16 lport_idx, u8 flags) +{ + u16 glort = (hw->mac.dglort_map + lport_idx) & FM10K_DGLORTMAP_NONE; + + /* if glort is not valid return error */ + if (!fm10k_glort_valid_pf(hw, glort)) + return FM10K_ERR_PARAM; + + vf_info->vf_flags = flags | FM10K_VF_FLAG_NONE_CAPABLE; + vf_info->glort = glort; + + return 0; +} + +/** + * fm10k_iov_reset_lport_pf - Disable a logical port for a given VF + * @hw: pointer to hardware structure + * @vf_info: pointer to VF information structure + * + * This function disables a VF port by stripping it of a GLORT and + * setting the flags so that it cannot enable any Rx mode. + **/ +static void fm10k_iov_reset_lport_pf(struct fm10k_hw *hw, + struct fm10k_vf_info *vf_info) +{ + u32 msg[1]; + + /* need to disable the port if it is already enabled */ + if (FM10K_VF_FLAG_ENABLED(vf_info)) { + /* notify switch that this port has been disabled */ + fm10k_update_lport_state_pf(hw, vf_info->glort, 1, false); + + /* generate port state response to notify VF it is not ready */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE); + vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); + } + + /* clear flags and glort if it exists */ + vf_info->vf_flags = 0; + vf_info->glort = 0; +} + +/** + * fm10k_iov_update_stats_pf - Updates hardware related statistics for VFs + * @hw: pointer to hardware structure + * @q: stats for all queues of a VF + * @vf_idx: index of VF + * + * This function collects queue stats for VFs. + **/ +static void fm10k_iov_update_stats_pf(struct fm10k_hw *hw, + struct fm10k_hw_stats_q *q, + u16 vf_idx) +{ + u32 idx, qpp; + + /* get stats for all of the queues */ + qpp = fm10k_queues_per_pool(hw); + idx = fm10k_vf_queue_index(hw, vf_idx); + fm10k_update_hw_stats_q(hw, q, idx, qpp); +} + +static s32 fm10k_iov_report_timestamp_pf(struct fm10k_hw *hw, + struct fm10k_vf_info *vf_info, + u64 timestamp) +{ + u32 msg[4]; + + /* generate port state response to notify VF it is not ready */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_1588); + fm10k_tlv_attr_put_u64(msg, FM10K_1588_MSG_TIMESTAMP, timestamp); + + return vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg); +} + +/** + * fm10k_iov_msg_msix_pf - Message handler for MSI-X request from VF + * @hw: Pointer to hardware structure + * @results: Pointer array to message, results[0] is pointer to message + * @mbx: Pointer to mailbox information structure + * + * This function is a default handler for MSI-X requests from the VF. The + * assumption is that in this case it is acceptable to just directly + * hand off the message form the VF to the underlying shared code. + **/ +s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; + u8 vf_idx = vf_info->vf_idx; + + return hw->iov.ops.assign_int_moderator(hw, vf_idx); +} + +/** + * fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF + * @hw: Pointer to hardware structure + * @results: Pointer array to message, results[0] is pointer to message + * @mbx: Pointer to mailbox information structure + * + * This function is a default handler for MAC/VLAN requests from the VF. + * The assumption is that in this case it is acceptable to just directly + * hand off the message form the VF to the underlying shared code. + **/ +s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; + int err = 0; + u8 mac[ETH_ALEN]; + u32 *result; + u16 vlan; + u32 vid; + + /* we shouldn't be updating rules on a disabled interface */ + if (!FM10K_VF_FLAG_ENABLED(vf_info)) + err = FM10K_ERR_PARAM; + + if (!err && !!results[FM10K_MAC_VLAN_MSG_VLAN]) { + result = results[FM10K_MAC_VLAN_MSG_VLAN]; + + /* record VLAN id requested */ + err = fm10k_tlv_attr_get_u32(result, &vid); + if (err) + return err; + + /* if VLAN ID is 0, set the default VLAN ID instead of 0 */ + if (!vid || (vid == FM10K_VLAN_CLEAR)) { + if (vf_info->pf_vid) + vid |= vf_info->pf_vid; + else + vid |= vf_info->sw_vid; + } else if (vid != vf_info->pf_vid) { + return FM10K_ERR_PARAM; + } + + /* update VSI info for VF in regards to VLAN table */ + err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, + !(vid & FM10K_VLAN_CLEAR)); + } + + if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) { + result = results[FM10K_MAC_VLAN_MSG_MAC]; + + /* record unicast MAC address requested */ + err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan); + if (err) + return err; + + /* block attempts to set MAC for a locked device */ + if (is_valid_ether_addr(vf_info->mac) && + memcmp(mac, vf_info->mac, ETH_ALEN)) + return FM10K_ERR_PARAM; + + /* if VLAN ID is 0, set the default VLAN ID instead of 0 */ + if (!vlan || (vlan == FM10K_VLAN_CLEAR)) { + if (vf_info->pf_vid) + vlan |= vf_info->pf_vid; + else + vlan |= vf_info->sw_vid; + } else if (vf_info->pf_vid) { + return FM10K_ERR_PARAM; + } + + /* notify switch of request for new unicast address */ + err = hw->mac.ops.update_uc_addr(hw, vf_info->glort, mac, vlan, + !(vlan & FM10K_VLAN_CLEAR), 0); + } + + if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) { + result = results[FM10K_MAC_VLAN_MSG_MULTICAST]; + + /* record multicast MAC address requested */ + err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan); + if (err) + return err; + + /* verify that the VF is allowed to request multicast */ + if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED)) + return FM10K_ERR_PARAM; + + /* if VLAN ID is 0, set the default VLAN ID instead of 0 */ + if (!vlan || (vlan == FM10K_VLAN_CLEAR)) { + if (vf_info->pf_vid) + vlan |= vf_info->pf_vid; + else + vlan |= vf_info->sw_vid; + } else if (vf_info->pf_vid) { + return FM10K_ERR_PARAM; + } + + /* notify switch of request for new multicast address */ + err = hw->mac.ops.update_mc_addr(hw, vf_info->glort, mac, + !(vlan & FM10K_VLAN_CLEAR), 0); + } + + return err; +} + +/** + * fm10k_iov_supported_xcast_mode_pf - Determine best match for xcast mode + * @vf_info: VF info structure containing capability flags + * @mode: Requested xcast mode + * + * This function outputs the mode that most closely matches the requested + * mode. If not modes match it will request we disable the port + **/ +static u8 fm10k_iov_supported_xcast_mode_pf(struct fm10k_vf_info *vf_info, + u8 mode) +{ + u8 vf_flags = vf_info->vf_flags; + + /* match up mode to capabilities as best as possible */ + switch (mode) { + case FM10K_XCAST_MODE_PROMISC: + if (vf_flags & FM10K_VF_FLAG_PROMISC_CAPABLE) + return FM10K_XCAST_MODE_PROMISC; + /* fallthough */ + case FM10K_XCAST_MODE_ALLMULTI: + if (vf_flags & FM10K_VF_FLAG_ALLMULTI_CAPABLE) + return FM10K_XCAST_MODE_ALLMULTI; + /* fallthough */ + case FM10K_XCAST_MODE_MULTI: + if (vf_flags & FM10K_VF_FLAG_MULTI_CAPABLE) + return FM10K_XCAST_MODE_MULTI; + /* fallthough */ + case FM10K_XCAST_MODE_NONE: + if (vf_flags & FM10K_VF_FLAG_NONE_CAPABLE) + return FM10K_XCAST_MODE_NONE; + /* fallthough */ + default: + break; + } + + /* disable interface as it should not be able to request any */ + return FM10K_XCAST_MODE_DISABLE; +} + +/** + * fm10k_iov_msg_lport_state_pf - Message handler for port state requests + * @hw: Pointer to hardware structure + * @results: Pointer array to message, results[0] is pointer to message + * @mbx: Pointer to mailbox information structure + * + * This function is a default handler for port state requests. The port + * state requests for now are basic and consist of enabling or disabling + * the port. + **/ +s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx; + u32 *result; + s32 err = 0; + u32 msg[2]; + u8 mode = 0; + + /* verify VF is allowed to enable even minimal mode */ + if (!(vf_info->vf_flags & FM10K_VF_FLAG_NONE_CAPABLE)) + return FM10K_ERR_PARAM; + + if (!!results[FM10K_LPORT_STATE_MSG_XCAST_MODE]) { + result = results[FM10K_LPORT_STATE_MSG_XCAST_MODE]; + + /* XCAST mode update requested */ + err = fm10k_tlv_attr_get_u8(result, &mode); + if (err) + return FM10K_ERR_PARAM; + + /* prep for possible demotion depending on capabilities */ + mode = fm10k_iov_supported_xcast_mode_pf(vf_info, mode); + + /* if mode is not currently enabled, enable it */ + if (!(FM10K_VF_FLAG_ENABLED(vf_info) & (1 << mode))) + fm10k_update_xcast_mode_pf(hw, vf_info->glort, mode); + + /* swap mode back to a bit flag */ + mode = FM10K_VF_FLAG_SET_MODE(mode); + } else if (!results[FM10K_LPORT_STATE_MSG_DISABLE]) { + /* need to disable the port if it is already enabled */ + if (FM10K_VF_FLAG_ENABLED(vf_info)) + err = fm10k_update_lport_state_pf(hw, vf_info->glort, + 1, false); + + /* when enabling the port we should reset the rate limiters */ + hw->iov.ops.configure_tc(hw, vf_info->vf_idx, vf_info->rate); + + /* set mode for minimal functionality */ + mode = FM10K_VF_FLAG_SET_MODE_NONE; + + /* generate port state response to notify VF it is ready */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE); + fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_READY); + mbx->ops.enqueue_tx(hw, mbx, msg); + } + + /* if enable state toggled note the update */ + if (!err && (!FM10K_VF_FLAG_ENABLED(vf_info) != !mode)) + err = fm10k_update_lport_state_pf(hw, vf_info->glort, 1, + !!mode); + + /* if state change succeeded, then update our stored state */ + mode |= FM10K_VF_FLAG_CAPABLE(vf_info); + if (!err) + vf_info->vf_flags = mode; + + return err; +} + +const struct fm10k_msg_data fm10k_iov_msg_data_pf[] = { + FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test), + FM10K_VF_MSG_MSIX_HANDLER(fm10k_iov_msg_msix_pf), + FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_iov_msg_mac_vlan_pf), + FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_iov_msg_lport_state_pf), + FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error), +}; + +/** + * fm10k_update_stats_hw_pf - Updates hardware related statistics of PF + * @hw: pointer to hardware structure + * @stats: pointer to the stats structure to update + * + * This function collects and aggregates global and per queue hardware + * statistics. + **/ +static void fm10k_update_hw_stats_pf(struct fm10k_hw *hw, + struct fm10k_hw_stats *stats) +{ + u32 timeout, ur, ca, um, xec, vlan_drop, loopback_drop, nodesc_drop; + u32 id, id_prev; + + /* Use Tx queue 0 as a canary to detect a reset */ + id = fm10k_read_reg(hw, FM10K_TXQCTL(0)); + + /* Read Global Statistics */ + do { + timeout = fm10k_read_hw_stats_32b(hw, FM10K_STATS_TIMEOUT, + &stats->timeout); + ur = fm10k_read_hw_stats_32b(hw, FM10K_STATS_UR, &stats->ur); + ca = fm10k_read_hw_stats_32b(hw, FM10K_STATS_CA, &stats->ca); + um = fm10k_read_hw_stats_32b(hw, FM10K_STATS_UM, &stats->um); + xec = fm10k_read_hw_stats_32b(hw, FM10K_STATS_XEC, &stats->xec); + vlan_drop = fm10k_read_hw_stats_32b(hw, FM10K_STATS_VLAN_DROP, + &stats->vlan_drop); + loopback_drop = fm10k_read_hw_stats_32b(hw, + FM10K_STATS_LOOPBACK_DROP, + &stats->loopback_drop); + nodesc_drop = fm10k_read_hw_stats_32b(hw, + FM10K_STATS_NODESC_DROP, + &stats->nodesc_drop); + + /* if value has not changed then we have consistent data */ + id_prev = id; + id = fm10k_read_reg(hw, FM10K_TXQCTL(0)); + } while ((id ^ id_prev) & FM10K_TXQCTL_ID_MASK); + + /* drop non-ID bits and set VALID ID bit */ + id &= FM10K_TXQCTL_ID_MASK; + id |= FM10K_STAT_VALID; + + /* Update Global Statistics */ + if (stats->stats_idx == id) { + stats->timeout.count += timeout; + stats->ur.count += ur; + stats->ca.count += ca; + stats->um.count += um; + stats->xec.count += xec; + stats->vlan_drop.count += vlan_drop; + stats->loopback_drop.count += loopback_drop; + stats->nodesc_drop.count += nodesc_drop; + } + + /* Update bases and record current PF id */ + fm10k_update_hw_base_32b(&stats->timeout, timeout); + fm10k_update_hw_base_32b(&stats->ur, ur); + fm10k_update_hw_base_32b(&stats->ca, ca); + fm10k_update_hw_base_32b(&stats->um, um); + fm10k_update_hw_base_32b(&stats->xec, xec); + fm10k_update_hw_base_32b(&stats->vlan_drop, vlan_drop); + fm10k_update_hw_base_32b(&stats->loopback_drop, loopback_drop); + fm10k_update_hw_base_32b(&stats->nodesc_drop, nodesc_drop); + stats->stats_idx = id; + + /* Update Queue Statistics */ + fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues); +} + +/** + * fm10k_rebind_hw_stats_pf - Resets base for hardware statistics of PF + * @hw: pointer to hardware structure + * @stats: pointer to the stats structure to update + * + * This function resets the base for global and per queue hardware + * statistics. + **/ +static void fm10k_rebind_hw_stats_pf(struct fm10k_hw *hw, + struct fm10k_hw_stats *stats) +{ + /* Unbind Global Statistics */ + fm10k_unbind_hw_stats_32b(&stats->timeout); + fm10k_unbind_hw_stats_32b(&stats->ur); + fm10k_unbind_hw_stats_32b(&stats->ca); + fm10k_unbind_hw_stats_32b(&stats->um); + fm10k_unbind_hw_stats_32b(&stats->xec); + fm10k_unbind_hw_stats_32b(&stats->vlan_drop); + fm10k_unbind_hw_stats_32b(&stats->loopback_drop); + fm10k_unbind_hw_stats_32b(&stats->nodesc_drop); + + /* Unbind Queue Statistics */ + fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues); + + /* Reinitialize bases for all stats */ + fm10k_update_hw_stats_pf(hw, stats); +} + +/** + * fm10k_set_dma_mask_pf - Configures PhyAddrSpace to limit DMA to system + * @hw: pointer to hardware structure + * @dma_mask: 64 bit DMA mask required for platform + * + * This function sets the PHYADDR.PhyAddrSpace bits for the endpoint in order + * to limit the access to memory beyond what is physically in the system. + **/ +static void fm10k_set_dma_mask_pf(struct fm10k_hw *hw, u64 dma_mask) +{ + /* we need to write the upper 32 bits of DMA mask to PhyAddrSpace */ + u32 phyaddr = (u32)(dma_mask >> 32); + + fm10k_write_reg(hw, FM10K_PHYADDR, phyaddr); +} + +/** + * fm10k_get_fault_pf - Record a fault in one of the interface units + * @hw: pointer to hardware structure + * @type: pointer to fault type register offset + * @fault: pointer to memory location to record the fault + * + * Record the fault register contents to the fault data structure and + * clear the entry from the register. + * + * Returns ERR_PARAM if invalid register is specified or no error is present. + **/ +static s32 fm10k_get_fault_pf(struct fm10k_hw *hw, int type, + struct fm10k_fault *fault) +{ + u32 func; + + /* verify the fault register is in range and is aligned */ + switch (type) { + case FM10K_PCA_FAULT: + case FM10K_THI_FAULT: + case FM10K_FUM_FAULT: + break; + default: + return FM10K_ERR_PARAM; + } + + /* only service faults that are valid */ + func = fm10k_read_reg(hw, type + FM10K_FAULT_FUNC); + if (!(func & FM10K_FAULT_FUNC_VALID)) + return FM10K_ERR_PARAM; + + /* read remaining fields */ + fault->address = fm10k_read_reg(hw, type + FM10K_FAULT_ADDR_HI); + fault->address <<= 32; + fault->address = fm10k_read_reg(hw, type + FM10K_FAULT_ADDR_LO); + fault->specinfo = fm10k_read_reg(hw, type + FM10K_FAULT_SPECINFO); + + /* clear valid bit to allow for next error */ + fm10k_write_reg(hw, type + FM10K_FAULT_FUNC, FM10K_FAULT_FUNC_VALID); + + /* Record which function triggered the error */ + if (func & FM10K_FAULT_FUNC_PF) + fault->func = 0; + else + fault->func = 1 + ((func & FM10K_FAULT_FUNC_VF_MASK) >> + FM10K_FAULT_FUNC_VF_SHIFT); + + /* record fault type */ + fault->type = func & FM10K_FAULT_FUNC_TYPE_MASK; + + return 0; +} + +/** + * fm10k_request_lport_map_pf - Request LPORT map from the switch API + * @hw: pointer to hardware structure + * + **/ +static s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[1]; + + /* issue request asking for LPORT map */ + fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_LPORT_MAP); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_get_host_state_pf - Returns the state of the switch and mailbox + * @hw: pointer to hardware structure + * @switch_ready: pointer to boolean value that will record switch state + * + * This funciton will check the DMA_CTRL2 register and mailbox in order + * to determine if the switch is ready for the PF to begin requesting + * addresses and mapping traffic to the local interface. + **/ +static s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready) +{ + s32 ret_val = 0; + u32 dma_ctrl2; + + /* verify the switch is ready for interraction */ + dma_ctrl2 = fm10k_read_reg(hw, FM10K_DMA_CTRL2); + if (!(dma_ctrl2 & FM10K_DMA_CTRL2_SWITCH_READY)) + goto out; + + /* retrieve generic host state info */ + ret_val = fm10k_get_host_state_generic(hw, switch_ready); + if (ret_val) + goto out; + + /* interface cannot receive traffic without logical ports */ + if (hw->mac.dglort_map == FM10K_DGLORTMAP_NONE) + ret_val = fm10k_request_lport_map_pf(hw); + +out: + return ret_val; +} + +/* This structure defines the attibutes to be parsed below */ +const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = { + FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_LPORT_MAP), + FM10K_TLV_ATTR_LAST +}; + +/** + * fm10k_msg_lport_map_pf - Message handler for lport_map message from SM + * @hw: Pointer to hardware structure + * @results: pointer array containing parsed data + * @mbx: Pointer to mailbox information structure + * + * This handler configures the lport mapping based on the reply from the + * switch API. + **/ +s32 fm10k_msg_lport_map_pf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + u16 glort, mask; + u32 dglort_map; + s32 err; + + err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_LPORT_MAP], + &dglort_map); + if (err) + return err; + + /* extract values out of the header */ + glort = FM10K_MSG_HDR_FIELD_GET(dglort_map, LPORT_MAP_GLORT); + mask = FM10K_MSG_HDR_FIELD_GET(dglort_map, LPORT_MAP_MASK); + + /* verify mask is set and none of the masked bits in glort are set */ + if (!mask || (glort & ~mask)) + return FM10K_ERR_PARAM; + + /* verify the mask is contiguous, and that it is 1's followed by 0's */ + if (((~(mask - 1) & mask) + mask) & FM10K_DGLORTMAP_NONE) + return FM10K_ERR_PARAM; + + /* record the glort, mask, and port count */ + hw->mac.dglort_map = dglort_map; + + return 0; +} + +const struct fm10k_tlv_attr fm10k_update_pvid_msg_attr[] = { + FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_UPDATE_PVID), + FM10K_TLV_ATTR_LAST +}; + +/** + * fm10k_msg_update_pvid_pf - Message handler for port VLAN message from SM + * @hw: Pointer to hardware structure + * @results: pointer array containing parsed data + * @mbx: Pointer to mailbox information structure + * + * This handler configures the default VLAN for the PF + **/ +s32 fm10k_msg_update_pvid_pf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + u16 glort, pvid; + u32 pvid_update; + s32 err; + + err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID], + &pvid_update); + if (err) + return err; + + /* extract values from the pvid update */ + glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT); + pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID); + + /* if glort is not valid return error */ + if (!fm10k_glort_valid_pf(hw, glort)) + return FM10K_ERR_PARAM; + + /* verify VID is valid */ + if (pvid >= FM10K_VLAN_TABLE_VID_MAX) + return FM10K_ERR_PARAM; + + /* record the port VLAN ID value */ + hw->mac.default_vid = pvid; + + return 0; +} + +/** + * fm10k_record_global_table_data - Move global table data to swapi table info + * @from: pointer to source table data structure + * @to: pointer to destination table info structure + * + * This function is will copy table_data to the table_info contained in + * the hw struct. + **/ +static void fm10k_record_global_table_data(struct fm10k_global_table_data *from, + struct fm10k_swapi_table_info *to) +{ + /* convert from le32 struct to CPU byte ordered values */ + to->used = le32_to_cpu(from->used); + to->avail = le32_to_cpu(from->avail); +} + +const struct fm10k_tlv_attr fm10k_err_msg_attr[] = { + FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR, + sizeof(struct fm10k_swapi_error)), + FM10K_TLV_ATTR_LAST +}; + +/** + * fm10k_msg_err_pf - Message handler for error reply + * @hw: Pointer to hardware structure + * @results: pointer array containing parsed data + * @mbx: Pointer to mailbox information structure + * + * This handler will capture the data for any error replies to previous + * messages that the PF has sent. + **/ +s32 fm10k_msg_err_pf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + struct fm10k_swapi_error err_msg; + s32 err; + + /* extract structure from message */ + err = fm10k_tlv_attr_get_le_struct(results[FM10K_PF_ATTR_ID_ERR], + &err_msg, sizeof(err_msg)); + if (err) + return err; + + /* record table status */ + fm10k_record_global_table_data(&err_msg.mac, &hw->swapi.mac); + fm10k_record_global_table_data(&err_msg.nexthop, &hw->swapi.nexthop); + fm10k_record_global_table_data(&err_msg.ffu, &hw->swapi.ffu); + + /* record SW API status value */ + hw->swapi.status = le32_to_cpu(err_msg.status); + + return 0; +} + +const struct fm10k_tlv_attr fm10k_1588_timestamp_msg_attr[] = { + FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_1588_TIMESTAMP, + sizeof(struct fm10k_swapi_1588_timestamp)), + FM10K_TLV_ATTR_LAST +}; + +/* currently there is no shared 1588 timestamp handler */ + +/** + * fm10k_adjust_systime_pf - Adjust systime frequency + * @hw: pointer to hardware structure + * @ppb: adjustment rate in parts per billion + * + * This function will adjust the SYSTIME_CFG register contained in BAR 4 + * if this function is supported for BAR 4 access. The adjustment amount + * is based on the parts per billion value provided and adjusted to a + * value based on parts per 2^48 clock cycles. + * + * If adjustment is not supported or the requested value is too large + * we will return an error. + **/ +static s32 fm10k_adjust_systime_pf(struct fm10k_hw *hw, s32 ppb) +{ + u64 systime_adjust; + + /* if sw_addr is not set we don't have switch register access */ + if (!hw->sw_addr) + return ppb ? FM10K_ERR_PARAM : 0; + + /* we must convert the value from parts per billion to parts per + * 2^48 cycles. In addition I have opted to only use the 30 most + * significant bits of the adjustment value as the 8 least + * significant bits are located in another register and represent + * a value significantly less than a part per billion, the result + * of dropping the 8 least significant bits is that the adjustment + * value is effectively multiplied by 2^8 when we write it. + * + * As a result of all this the math for this breaks down as follows: + * ppb / 10^9 == adjust * 2^8 / 2^48 + * If we solve this for adjust, and simplify it comes out as: + * ppb * 2^31 / 5^9 == adjust + */ + systime_adjust = (ppb < 0) ? -ppb : ppb; + systime_adjust <<= 31; + do_div(systime_adjust, 1953125); + + /* verify the requested adjustment value is in range */ + if (systime_adjust > FM10K_SW_SYSTIME_ADJUST_MASK) + return FM10K_ERR_PARAM; + + if (ppb < 0) + systime_adjust |= FM10K_SW_SYSTIME_ADJUST_DIR_NEGATIVE; + + fm10k_write_sw_reg(hw, FM10K_SW_SYSTIME_ADJUST, (u32)systime_adjust); + + return 0; +} + +/** + * fm10k_read_systime_pf - Reads value of systime registers + * @hw: pointer to the hardware structure + * + * Function reads the content of 2 registers, combined to represent a 64 bit + * value measured in nanosecods. In order to guarantee the value is accurate + * we check the 32 most significant bits both before and after reading the + * 32 least significant bits to verify they didn't change as we were reading + * the registers. + **/ +static u64 fm10k_read_systime_pf(struct fm10k_hw *hw) +{ + u32 systime_l, systime_h, systime_tmp; + + systime_h = fm10k_read_reg(hw, FM10K_SYSTIME + 1); + + do { + systime_tmp = systime_h; + systime_l = fm10k_read_reg(hw, FM10K_SYSTIME); + systime_h = fm10k_read_reg(hw, FM10K_SYSTIME + 1); + } while (systime_tmp != systime_h); + + return ((u64)systime_h << 32) | systime_l; +} + +static const struct fm10k_msg_data fm10k_msg_data_pf[] = { + FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf), + FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf), + FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_msg_lport_map_pf), + FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf), + FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf), + FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_msg_update_pvid_pf), + FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error), +}; + +static struct fm10k_mac_ops mac_ops_pf = { + .get_bus_info = &fm10k_get_bus_info_generic, + .reset_hw = &fm10k_reset_hw_pf, + .init_hw = &fm10k_init_hw_pf, + .start_hw = &fm10k_start_hw_generic, + .stop_hw = &fm10k_stop_hw_generic, + .is_slot_appropriate = &fm10k_is_slot_appropriate_pf, + .update_vlan = &fm10k_update_vlan_pf, + .read_mac_addr = &fm10k_read_mac_addr_pf, + .update_uc_addr = &fm10k_update_uc_addr_pf, + .update_mc_addr = &fm10k_update_mc_addr_pf, + .update_xcast_mode = &fm10k_update_xcast_mode_pf, + .update_int_moderator = &fm10k_update_int_moderator_pf, + .update_lport_state = &fm10k_update_lport_state_pf, + .update_hw_stats = &fm10k_update_hw_stats_pf, + .rebind_hw_stats = &fm10k_rebind_hw_stats_pf, + .configure_dglort_map = &fm10k_configure_dglort_map_pf, + .set_dma_mask = &fm10k_set_dma_mask_pf, + .get_fault = &fm10k_get_fault_pf, + .get_host_state = &fm10k_get_host_state_pf, + .adjust_systime = &fm10k_adjust_systime_pf, + .read_systime = &fm10k_read_systime_pf, +}; + +static struct fm10k_iov_ops iov_ops_pf = { + .assign_resources = &fm10k_iov_assign_resources_pf, + .configure_tc = &fm10k_iov_configure_tc_pf, + .assign_int_moderator = &fm10k_iov_assign_int_moderator_pf, + .assign_default_mac_vlan = fm10k_iov_assign_default_mac_vlan_pf, + .reset_resources = &fm10k_iov_reset_resources_pf, + .set_lport = &fm10k_iov_set_lport_pf, + .reset_lport = &fm10k_iov_reset_lport_pf, + .update_stats = &fm10k_iov_update_stats_pf, + .report_timestamp = &fm10k_iov_report_timestamp_pf, +}; + +static s32 fm10k_get_invariants_pf(struct fm10k_hw *hw) +{ + fm10k_get_invariants_generic(hw); + + return fm10k_sm_mbx_init(hw, &hw->mbx, fm10k_msg_data_pf); +} + +struct fm10k_info fm10k_pf_info = { + .mac = fm10k_mac_pf, + .get_invariants = &fm10k_get_invariants_pf, + .mac_ops = &mac_ops_pf, + .iov_ops = &iov_ops_pf, +}; diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.h b/drivers/net/ethernet/intel/fm10k/fm10k_pf.h new file mode 100644 index 00000000000..7ab1db4fff3 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.h @@ -0,0 +1,135 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#ifndef _FM10K_PF_H_ +#define _FM10K_PF_H_ + +#include "fm10k_type.h" +#include "fm10k_common.h" + +bool fm10k_glort_valid_pf(struct fm10k_hw *hw, u16 glort); +u16 fm10k_queues_per_pool(struct fm10k_hw *hw); +u16 fm10k_vf_queue_index(struct fm10k_hw *hw, u16 vf_idx); + +enum fm10k_pf_tlv_msg_id_v1 { + FM10K_PF_MSG_ID_TEST = 0x000, /* msg ID reserved */ + FM10K_PF_MSG_ID_XCAST_MODES = 0x001, + FM10K_PF_MSG_ID_UPDATE_MAC_FWD_RULE = 0x002, + FM10K_PF_MSG_ID_LPORT_MAP = 0x100, + FM10K_PF_MSG_ID_LPORT_CREATE = 0x200, + FM10K_PF_MSG_ID_LPORT_DELETE = 0x201, + FM10K_PF_MSG_ID_CONFIG = 0x300, + FM10K_PF_MSG_ID_UPDATE_PVID = 0x400, + FM10K_PF_MSG_ID_CREATE_FLOW_TABLE = 0x501, + FM10K_PF_MSG_ID_DELETE_FLOW_TABLE = 0x502, + FM10K_PF_MSG_ID_UPDATE_FLOW = 0x503, + FM10K_PF_MSG_ID_DELETE_FLOW = 0x504, + FM10K_PF_MSG_ID_SET_FLOW_STATE = 0x505, + FM10K_PF_MSG_ID_GET_1588_INFO = 0x506, + FM10K_PF_MSG_ID_1588_TIMESTAMP = 0x701, +}; + +enum fm10k_pf_tlv_attr_id_v1 { + FM10K_PF_ATTR_ID_ERR = 0x00, + FM10K_PF_ATTR_ID_LPORT_MAP = 0x01, + FM10K_PF_ATTR_ID_XCAST_MODE = 0x02, + FM10K_PF_ATTR_ID_MAC_UPDATE = 0x03, + FM10K_PF_ATTR_ID_VLAN_UPDATE = 0x04, + FM10K_PF_ATTR_ID_CONFIG = 0x05, + FM10K_PF_ATTR_ID_CREATE_FLOW_TABLE = 0x06, + FM10K_PF_ATTR_ID_DELETE_FLOW_TABLE = 0x07, + FM10K_PF_ATTR_ID_UPDATE_FLOW = 0x08, + FM10K_PF_ATTR_ID_FLOW_STATE = 0x09, + FM10K_PF_ATTR_ID_FLOW_HANDLE = 0x0A, + FM10K_PF_ATTR_ID_DELETE_FLOW = 0x0B, + FM10K_PF_ATTR_ID_PORT = 0x0C, + FM10K_PF_ATTR_ID_UPDATE_PVID = 0x0D, + FM10K_PF_ATTR_ID_1588_TIMESTAMP = 0x10, +}; + +#define FM10K_MSG_LPORT_MAP_GLORT_SHIFT 0 +#define FM10K_MSG_LPORT_MAP_GLORT_SIZE 16 +#define FM10K_MSG_LPORT_MAP_MASK_SHIFT 16 +#define FM10K_MSG_LPORT_MAP_MASK_SIZE 16 + +#define FM10K_MSG_UPDATE_PVID_GLORT_SHIFT 0 +#define FM10K_MSG_UPDATE_PVID_GLORT_SIZE 16 +#define FM10K_MSG_UPDATE_PVID_PVID_SHIFT 16 +#define FM10K_MSG_UPDATE_PVID_PVID_SIZE 16 + +struct fm10k_mac_update { + __le32 mac_lower; + __le16 mac_upper; + __le16 vlan; + __le16 glort; + u8 flags; + u8 action; +}; + +struct fm10k_global_table_data { + __le32 used; + __le32 avail; +}; + +struct fm10k_swapi_error { + __le32 status; + struct fm10k_global_table_data mac; + struct fm10k_global_table_data nexthop; + struct fm10k_global_table_data ffu; +}; + +struct fm10k_swapi_1588_timestamp { + __le64 egress; + __le64 ingress; + __le16 dglort; + __le16 sglort; +}; + +s32 fm10k_msg_lport_map_pf(struct fm10k_hw *, u32 **, struct fm10k_mbx_info *); +extern const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[]; +#define FM10K_PF_MSG_LPORT_MAP_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_PF_MSG_ID_LPORT_MAP, \ + fm10k_lport_map_msg_attr, func) +s32 fm10k_msg_update_pvid_pf(struct fm10k_hw *, u32 **, + struct fm10k_mbx_info *); +extern const struct fm10k_tlv_attr fm10k_update_pvid_msg_attr[]; +#define FM10K_PF_MSG_UPDATE_PVID_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_PF_MSG_ID_UPDATE_PVID, \ + fm10k_update_pvid_msg_attr, func) + +s32 fm10k_msg_err_pf(struct fm10k_hw *, u32 **, struct fm10k_mbx_info *); +extern const struct fm10k_tlv_attr fm10k_err_msg_attr[]; +#define FM10K_PF_MSG_ERR_HANDLER(msg, func) \ + FM10K_MSG_HANDLER(FM10K_PF_MSG_ID_##msg, fm10k_err_msg_attr, func) + +extern const struct fm10k_tlv_attr fm10k_1588_timestamp_msg_attr[]; +#define FM10K_PF_MSG_1588_TIMESTAMP_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_PF_MSG_ID_1588_TIMESTAMP, \ + fm10k_1588_timestamp_msg_attr, func) + +s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *, u32 **, struct fm10k_mbx_info *); +s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *, u32 **, + struct fm10k_mbx_info *); +s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *, u32 **, + struct fm10k_mbx_info *); +extern const struct fm10k_msg_data fm10k_iov_msg_data_pf[]; + +extern struct fm10k_info fm10k_pf_info; +#endif /* _FM10K_PF_H */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_ptp.c b/drivers/net/ethernet/intel/fm10k/fm10k_ptp.c new file mode 100644 index 00000000000..7822809436a --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_ptp.c @@ -0,0 +1,463 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include <linux/ptp_classify.h> +#include <linux/ptp_clock_kernel.h> + +#include "fm10k.h" + +#define FM10K_TS_TX_TIMEOUT (HZ * 15) + +void fm10k_systime_to_hwtstamp(struct fm10k_intfc *interface, + struct skb_shared_hwtstamps *hwtstamp, + u64 systime) +{ + unsigned long flags; + + read_lock_irqsave(&interface->systime_lock, flags); + systime += interface->ptp_adjust; + read_unlock_irqrestore(&interface->systime_lock, flags); + + hwtstamp->hwtstamp = ns_to_ktime(systime); +} + +static struct sk_buff *fm10k_ts_tx_skb(struct fm10k_intfc *interface, + __le16 dglort) +{ + struct sk_buff_head *list = &interface->ts_tx_skb_queue; + struct sk_buff *skb; + + skb_queue_walk(list, skb) { + if (FM10K_CB(skb)->fi.w.dglort == dglort) + return skb; + } + + return NULL; +} + +void fm10k_ts_tx_enqueue(struct fm10k_intfc *interface, struct sk_buff *skb) +{ + struct sk_buff_head *list = &interface->ts_tx_skb_queue; + struct sk_buff *clone; + unsigned long flags; + __le16 dglort; + + /* create clone for us to return on the Tx path */ + clone = skb_clone_sk(skb); + if (!clone) + return; + + FM10K_CB(clone)->ts_tx_timeout = jiffies + FM10K_TS_TX_TIMEOUT; + dglort = FM10K_CB(clone)->fi.w.dglort; + + spin_lock_irqsave(&list->lock, flags); + + /* attempt to locate any buffers with the same dglort, + * if none are present then insert skb in tail of list + */ + skb = fm10k_ts_tx_skb(interface, FM10K_CB(clone)->fi.w.dglort); + if (!skb) + __skb_queue_tail(list, clone); + + spin_unlock_irqrestore(&list->lock, flags); + + /* if list is already has one then we just free the clone */ + if (skb) + kfree_skb(skb); + else + skb_shinfo(clone)->tx_flags |= SKBTX_IN_PROGRESS; +} + +void fm10k_ts_tx_hwtstamp(struct fm10k_intfc *interface, __le16 dglort, + u64 systime) +{ + struct skb_shared_hwtstamps shhwtstamps; + struct sk_buff_head *list = &interface->ts_tx_skb_queue; + struct sk_buff *skb; + unsigned long flags; + + spin_lock_irqsave(&list->lock, flags); + + /* attempt to locate and pull the sk_buff out of the list */ + skb = fm10k_ts_tx_skb(interface, dglort); + if (skb) + __skb_unlink(skb, list); + + spin_unlock_irqrestore(&list->lock, flags); + + /* if not found do nothing */ + if (!skb) + return; + + /* timestamp the sk_buff and return it to the socket */ + fm10k_systime_to_hwtstamp(interface, &shhwtstamps, systime); + skb_complete_tx_timestamp(skb, &shhwtstamps); +} + +void fm10k_ts_tx_subtask(struct fm10k_intfc *interface) +{ + struct sk_buff_head *list = &interface->ts_tx_skb_queue; + struct sk_buff *skb, *tmp; + unsigned long flags; + + /* If we're down or resetting, just bail */ + if (test_bit(__FM10K_DOWN, &interface->state) || + test_bit(__FM10K_RESETTING, &interface->state)) + return; + + spin_lock_irqsave(&list->lock, flags); + + /* walk though the list and flush any expired timestamp packets */ + skb_queue_walk_safe(list, skb, tmp) { + if (!time_is_after_jiffies(FM10K_CB(skb)->ts_tx_timeout)) + continue; + __skb_unlink(skb, list); + kfree_skb(skb); + interface->tx_hwtstamp_timeouts++; + } + + spin_unlock_irqrestore(&list->lock, flags); +} + +static u64 fm10k_systime_read(struct fm10k_intfc *interface) +{ + struct fm10k_hw *hw = &interface->hw; + + return hw->mac.ops.read_systime(hw); +} + +void fm10k_ts_reset(struct fm10k_intfc *interface) +{ + s64 ns = ktime_to_ns(ktime_get_real()); + unsigned long flags; + + /* reinitialize the clock */ + write_lock_irqsave(&interface->systime_lock, flags); + interface->ptp_adjust = fm10k_systime_read(interface) - ns; + write_unlock_irqrestore(&interface->systime_lock, flags); +} + +void fm10k_ts_init(struct fm10k_intfc *interface) +{ + /* Initialize lock protecting systime access */ + rwlock_init(&interface->systime_lock); + + /* Initialize skb queue for pending timestamp requests */ + skb_queue_head_init(&interface->ts_tx_skb_queue); + + /* reset the clock to current kernel time */ + fm10k_ts_reset(interface); +} + +/** + * fm10k_get_ts_config - get current hardware timestamping configuration + * @netdev: network interface device structure + * @ifreq: ioctl data + * + * This function returns the current timestamping settings. Rather than + * attempt to deconstruct registers to fill in the values, simply keep a copy + * of the old settings around, and return a copy when requested. + */ +int fm10k_get_ts_config(struct net_device *netdev, struct ifreq *ifr) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct hwtstamp_config *config = &interface->ts_config; + + return copy_to_user(ifr->ifr_data, config, sizeof(*config)) ? + -EFAULT : 0; +} + +/** + * fm10k_set_ts_config - control hardware time stamping + * @netdev: network interface device structure + * @ifreq: ioctl data + * + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't cause any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware + * filters. Not all combinations are supported, in particular event + * type has to be specified. Matching the kind of event packet is + * not supported, with the exception of "all V2 events regardless of + * level 2 or 4". + * + * Since hardware always timestamps Path delay packets when timestamping V2 + * packets, regardless of the type specified in the register, only use V2 + * Event mode. This more accurately tells the user what the hardware is going + * to do anyways. + */ +int fm10k_set_ts_config(struct net_device *netdev, struct ifreq *ifr) +{ + struct fm10k_intfc *interface = netdev_priv(netdev); + struct hwtstamp_config ts_config; + + if (copy_from_user(&ts_config, ifr->ifr_data, sizeof(ts_config))) + return -EFAULT; + + /* reserved for future extensions */ + if (ts_config.flags) + return -EINVAL; + + switch (ts_config.tx_type) { + case HWTSTAMP_TX_OFF: + break; + case HWTSTAMP_TX_ON: + /* we likely need some check here to see if this is supported */ + break; + default: + return -ERANGE; + } + + switch (ts_config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + interface->flags &= ~FM10K_FLAG_RX_TS_ENABLED; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + case HWTSTAMP_FILTER_ALL: + interface->flags |= FM10K_FLAG_RX_TS_ENABLED; + ts_config.rx_filter = HWTSTAMP_FILTER_ALL; + break; + default: + return -ERANGE; + } + + /* save these settings for future reference */ + interface->ts_config = ts_config; + + return copy_to_user(ifr->ifr_data, &ts_config, sizeof(ts_config)) ? + -EFAULT : 0; +} + +static int fm10k_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) +{ + struct fm10k_intfc *interface; + struct fm10k_hw *hw; + int err; + + interface = container_of(ptp, struct fm10k_intfc, ptp_caps); + hw = &interface->hw; + + err = hw->mac.ops.adjust_systime(hw, ppb); + + /* the only error we should see is if the value is out of range */ + return (err == FM10K_ERR_PARAM) ? -ERANGE : err; +} + +static int fm10k_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) +{ + struct fm10k_intfc *interface; + unsigned long flags; + + interface = container_of(ptp, struct fm10k_intfc, ptp_caps); + + write_lock_irqsave(&interface->systime_lock, flags); + interface->ptp_adjust += delta; + write_unlock_irqrestore(&interface->systime_lock, flags); + + return 0; +} + +static int fm10k_ptp_gettime(struct ptp_clock_info *ptp, struct timespec *ts) +{ + struct fm10k_intfc *interface; + unsigned long flags; + u64 now; + + interface = container_of(ptp, struct fm10k_intfc, ptp_caps); + + read_lock_irqsave(&interface->systime_lock, flags); + now = fm10k_systime_read(interface) + interface->ptp_adjust; + read_unlock_irqrestore(&interface->systime_lock, flags); + + *ts = ns_to_timespec(now); + + return 0; +} + +static int fm10k_ptp_settime(struct ptp_clock_info *ptp, + const struct timespec *ts) +{ + struct fm10k_intfc *interface; + unsigned long flags; + u64 ns = timespec_to_ns(ts); + + interface = container_of(ptp, struct fm10k_intfc, ptp_caps); + + write_lock_irqsave(&interface->systime_lock, flags); + interface->ptp_adjust = fm10k_systime_read(interface) - ns; + write_unlock_irqrestore(&interface->systime_lock, flags); + + return 0; +} + +static int fm10k_ptp_enable(struct ptp_clock_info *ptp, + struct ptp_clock_request *rq, int on) +{ + struct ptp_clock_time *t = &rq->perout.period; + struct fm10k_intfc *interface; + struct fm10k_hw *hw; + u64 period; + u32 step; + + /* we can only support periodic output */ + if (rq->type != PTP_CLK_REQ_PEROUT) + return -EINVAL; + + /* verify the requested channel is there */ + if (rq->perout.index >= ptp->n_per_out) + return -EINVAL; + + /* we cannot enforce start time as there is no + * mechanism for that in the hardware, we can only control + * the period. + */ + + /* we cannot support periods greater than 4 seconds due to reg limit */ + if (t->sec > 4 || t->sec < 0) + return -ERANGE; + + interface = container_of(ptp, struct fm10k_intfc, ptp_caps); + hw = &interface->hw; + + /* we simply cannot support the operation if we don't have BAR4 */ + if (!hw->sw_addr) + return -ENOTSUPP; + + /* convert to unsigned 64b ns, verify we can put it in a 32b register */ + period = t->sec * 1000000000LL + t->nsec; + + /* determine the minimum size for period */ + step = 2 * (fm10k_read_reg(hw, FM10K_SYSTIME_CFG) & + FM10K_SYSTIME_CFG_STEP_MASK); + + /* verify the value is in range supported by hardware */ + if ((period && (period < step)) || (period > U32_MAX)) + return -ERANGE; + + /* notify hardware of request to being sending pulses */ + fm10k_write_sw_reg(hw, FM10K_SW_SYSTIME_PULSE(rq->perout.index), + (u32)period); + + return 0; +} + +static struct ptp_pin_desc fm10k_ptp_pd[2] = { + { + .name = "IEEE1588_PULSE0", + .index = 0, + .func = PTP_PF_PEROUT, + .chan = 0 + }, + { + .name = "IEEE1588_PULSE1", + .index = 1, + .func = PTP_PF_PEROUT, + .chan = 1 + } +}; + +static int fm10k_ptp_verify(struct ptp_clock_info *ptp, unsigned int pin, + enum ptp_pin_function func, unsigned int chan) +{ + /* verify the requested pin is there */ + if (pin >= ptp->n_pins || !ptp->pin_config) + return -EINVAL; + + /* enforce locked channels, no changing them */ + if (chan != ptp->pin_config[pin].chan) + return -EINVAL; + + /* we want to keep the functions locked as well */ + if (func != ptp->pin_config[pin].func) + return -EINVAL; + + return 0; +} + +void fm10k_ptp_register(struct fm10k_intfc *interface) +{ + struct ptp_clock_info *ptp_caps = &interface->ptp_caps; + struct device *dev = &interface->pdev->dev; + struct ptp_clock *ptp_clock; + + snprintf(ptp_caps->name, sizeof(ptp_caps->name), + "%s", interface->netdev->name); + ptp_caps->owner = THIS_MODULE; + /* This math is simply the inverse of the math in + * fm10k_adjust_systime_pf applied to an adjustment value + * of 2^30 - 1 which is the maximum value of the register: + * max_ppb == ((2^30 - 1) * 5^9) / 2^31 + */ + ptp_caps->max_adj = 976562; + ptp_caps->adjfreq = fm10k_ptp_adjfreq; + ptp_caps->adjtime = fm10k_ptp_adjtime; + ptp_caps->gettime = fm10k_ptp_gettime; + ptp_caps->settime = fm10k_ptp_settime; + + /* provide pins if BAR4 is accessible */ + if (interface->sw_addr) { + /* enable periodic outputs */ + ptp_caps->n_per_out = 2; + ptp_caps->enable = fm10k_ptp_enable; + + /* enable clock pins */ + ptp_caps->verify = fm10k_ptp_verify; + ptp_caps->n_pins = 2; + ptp_caps->pin_config = fm10k_ptp_pd; + } + + ptp_clock = ptp_clock_register(ptp_caps, dev); + if (IS_ERR(ptp_clock)) { + ptp_clock = NULL; + dev_err(dev, "ptp_clock_register failed\n"); + } else { + dev_info(dev, "registered PHC device %s\n", ptp_caps->name); + } + + interface->ptp_clock = ptp_clock; +} + +void fm10k_ptp_unregister(struct fm10k_intfc *interface) +{ + struct ptp_clock *ptp_clock = interface->ptp_clock; + struct device *dev = &interface->pdev->dev; + + if (!ptp_clock) + return; + + interface->ptp_clock = NULL; + + ptp_clock_unregister(ptp_clock); + dev_info(dev, "removed PHC %s\n", interface->ptp_caps.name); +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_tlv.c b/drivers/net/ethernet/intel/fm10k/fm10k_tlv.c new file mode 100644 index 00000000000..fd0a05f011a --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_tlv.c @@ -0,0 +1,863 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k_tlv.h" + +/** + * fm10k_tlv_msg_init - Initialize message block for TLV data storage + * @msg: Pointer to message block + * @msg_id: Message ID indicating message type + * + * This function return success if provided with a valid message pointer + **/ +s32 fm10k_tlv_msg_init(u32 *msg, u16 msg_id) +{ + /* verify pointer is not NULL */ + if (!msg) + return FM10K_ERR_PARAM; + + *msg = (FM10K_TLV_FLAGS_MSG << FM10K_TLV_FLAGS_SHIFT) | msg_id; + + return 0; +} + +/** + * fm10k_tlv_attr_put_null_string - Place null terminated string on message + * @msg: Pointer to message block + * @attr_id: Attribute ID + * @string: Pointer to string to be stored in attribute + * + * This function will reorder a string to be CPU endian and store it in + * the attribute buffer. It will return success if provided with a valid + * pointers. + **/ +s32 fm10k_tlv_attr_put_null_string(u32 *msg, u16 attr_id, + const unsigned char *string) +{ + u32 attr_data = 0, len = 0; + u32 *attr; + + /* verify pointers are not NULL */ + if (!string || !msg) + return FM10K_ERR_PARAM; + + attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; + + /* copy string into local variable and then write to msg */ + do { + /* write data to message */ + if (len && !(len % 4)) { + attr[len / 4] = attr_data; + attr_data = 0; + } + + /* record character to offset location */ + attr_data |= (u32)(*string) << (8 * (len % 4)); + len++; + + /* test for NULL and then increment */ + } while (*(string++)); + + /* write last piece of data to message */ + attr[(len + 3) / 4] = attr_data; + + /* record attribute header, update message length */ + len <<= FM10K_TLV_LEN_SHIFT; + attr[0] = len | attr_id; + + /* add header length to length */ + len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; + *msg += FM10K_TLV_LEN_ALIGN(len); + + return 0; +} + +/** + * fm10k_tlv_attr_get_null_string - Get null terminated string from attribute + * @attr: Pointer to attribute + * @string: Pointer to location of destination string + * + * This function pulls the string back out of the attribute and will place + * it in the array pointed by by string. It will return success if provided + * with a valid pointers. + **/ +s32 fm10k_tlv_attr_get_null_string(u32 *attr, unsigned char *string) +{ + u32 len; + + /* verify pointers are not NULL */ + if (!string || !attr) + return FM10K_ERR_PARAM; + + len = *attr >> FM10K_TLV_LEN_SHIFT; + attr++; + + while (len--) + string[len] = (u8)(attr[len / 4] >> (8 * (len % 4))); + + return 0; +} + +/** + * fm10k_tlv_attr_put_mac_vlan - Store MAC/VLAN attribute in message + * @msg: Pointer to message block + * @attr_id: Attribute ID + * @mac_addr: MAC address to be stored + * + * This function will reorder a MAC address to be CPU endian and store it + * in the attribute buffer. It will return success if provided with a + * valid pointers. + **/ +s32 fm10k_tlv_attr_put_mac_vlan(u32 *msg, u16 attr_id, + const u8 *mac_addr, u16 vlan) +{ + u32 len = ETH_ALEN << FM10K_TLV_LEN_SHIFT; + u32 *attr; + + /* verify pointers are not NULL */ + if (!msg || !mac_addr) + return FM10K_ERR_PARAM; + + attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; + + /* record attribute header, update message length */ + attr[0] = len | attr_id; + + /* copy value into local variable and then write to msg */ + attr[1] = le32_to_cpu(*(const __le32 *)&mac_addr[0]); + attr[2] = le16_to_cpu(*(const __le16 *)&mac_addr[4]); + attr[2] |= (u32)vlan << 16; + + /* add header length to length */ + len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; + *msg += FM10K_TLV_LEN_ALIGN(len); + + return 0; +} + +/** + * fm10k_tlv_attr_get_mac_vlan - Get MAC/VLAN stored in attribute + * @attr: Pointer to attribute + * @attr_id: Attribute ID + * @mac_addr: location of buffer to store MAC address + * + * This function pulls the MAC address back out of the attribute and will + * place it in the array pointed by by mac_addr. It will return success + * if provided with a valid pointers. + **/ +s32 fm10k_tlv_attr_get_mac_vlan(u32 *attr, u8 *mac_addr, u16 *vlan) +{ + /* verify pointers are not NULL */ + if (!mac_addr || !attr) + return FM10K_ERR_PARAM; + + *(__le32 *)&mac_addr[0] = cpu_to_le32(attr[1]); + *(__le16 *)&mac_addr[4] = cpu_to_le16((u16)(attr[2])); + *vlan = (u16)(attr[2] >> 16); + + return 0; +} + +/** + * fm10k_tlv_attr_put_bool - Add header indicating value "true" + * @msg: Pointer to message block + * @attr_id: Attribute ID + * + * This function will simply add an attribute header, the fact + * that the header is here means the attribute value is true, else + * it is false. The function will return success if provided with a + * valid pointers. + **/ +s32 fm10k_tlv_attr_put_bool(u32 *msg, u16 attr_id) +{ + /* verify pointers are not NULL */ + if (!msg) + return FM10K_ERR_PARAM; + + /* record attribute header */ + msg[FM10K_TLV_DWORD_LEN(*msg)] = attr_id; + + /* add header length to length */ + *msg += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; + + return 0; +} + +/** + * fm10k_tlv_attr_put_value - Store integer value attribute in message + * @msg: Pointer to message block + * @attr_id: Attribute ID + * @value: Value to be written + * @len: Size of value + * + * This function will place an integer value of up to 8 bytes in size + * in a message attribute. The function will return success provided + * that msg is a valid pointer, and len is 1, 2, 4, or 8. + **/ +s32 fm10k_tlv_attr_put_value(u32 *msg, u16 attr_id, s64 value, u32 len) +{ + u32 *attr; + + /* verify non-null msg and len is 1, 2, 4, or 8 */ + if (!msg || !len || len > 8 || (len & (len - 1))) + return FM10K_ERR_PARAM; + + attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; + + if (len < 4) { + attr[1] = (u32)value & ((0x1ul << (8 * len)) - 1); + } else { + attr[1] = (u32)value; + if (len > 4) + attr[2] = (u32)(value >> 32); + } + + /* record attribute header, update message length */ + len <<= FM10K_TLV_LEN_SHIFT; + attr[0] = len | attr_id; + + /* add header length to length */ + len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; + *msg += FM10K_TLV_LEN_ALIGN(len); + + return 0; +} + +/** + * fm10k_tlv_attr_get_value - Get integer value stored in attribute + * @attr: Pointer to attribute + * @value: Pointer to destination buffer + * @len: Size of value + * + * This function will place an integer value of up to 8 bytes in size + * in the offset pointed to by value. The function will return success + * provided that pointers are valid and the len value matches the + * attribute length. + **/ +s32 fm10k_tlv_attr_get_value(u32 *attr, void *value, u32 len) +{ + /* verify pointers are not NULL */ + if (!attr || !value) + return FM10K_ERR_PARAM; + + if ((*attr >> FM10K_TLV_LEN_SHIFT) != len) + return FM10K_ERR_PARAM; + + if (len == 8) + *(u64 *)value = ((u64)attr[2] << 32) | attr[1]; + else if (len == 4) + *(u32 *)value = attr[1]; + else if (len == 2) + *(u16 *)value = (u16)attr[1]; + else + *(u8 *)value = (u8)attr[1]; + + return 0; +} + +/** + * fm10k_tlv_attr_put_le_struct - Store little endian structure in message + * @msg: Pointer to message block + * @attr_id: Attribute ID + * @le_struct: Pointer to structure to be written + * @len: Size of le_struct + * + * This function will place a little endian structure value in a message + * attribute. The function will return success provided that all pointers + * are valid and length is a non-zero multiple of 4. + **/ +s32 fm10k_tlv_attr_put_le_struct(u32 *msg, u16 attr_id, + const void *le_struct, u32 len) +{ + const __le32 *le32_ptr = (const __le32 *)le_struct; + u32 *attr; + u32 i; + + /* verify non-null msg and len is in 32 bit words */ + if (!msg || !len || (len % 4)) + return FM10K_ERR_PARAM; + + attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; + + /* copy le32 structure into host byte order at 32b boundaries */ + for (i = 0; i < (len / 4); i++) + attr[i + 1] = le32_to_cpu(le32_ptr[i]); + + /* record attribute header, update message length */ + len <<= FM10K_TLV_LEN_SHIFT; + attr[0] = len | attr_id; + + /* add header length to length */ + len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; + *msg += FM10K_TLV_LEN_ALIGN(len); + + return 0; +} + +/** + * fm10k_tlv_attr_get_le_struct - Get little endian struct form attribute + * @attr: Pointer to attribute + * @le_struct: Pointer to structure to be written + * @len: Size of structure + * + * This function will place a little endian structure in the buffer + * pointed to by le_struct. The function will return success + * provided that pointers are valid and the len value matches the + * attribute length. + **/ +s32 fm10k_tlv_attr_get_le_struct(u32 *attr, void *le_struct, u32 len) +{ + __le32 *le32_ptr = (__le32 *)le_struct; + u32 i; + + /* verify pointers are not NULL */ + if (!le_struct || !attr) + return FM10K_ERR_PARAM; + + if ((*attr >> FM10K_TLV_LEN_SHIFT) != len) + return FM10K_ERR_PARAM; + + attr++; + + for (i = 0; len; i++, len -= 4) + le32_ptr[i] = cpu_to_le32(attr[i]); + + return 0; +} + +/** + * fm10k_tlv_attr_nest_start - Start a set of nested attributes + * @msg: Pointer to message block + * @attr_id: Attribute ID + * + * This function will mark off a new nested region for encapsulating + * a given set of attributes. The idea is if you wish to place a secondary + * structure within the message this mechanism allows for that. The + * function will return NULL on failure, and a pointer to the start + * of the nested attributes on success. + **/ +u32 *fm10k_tlv_attr_nest_start(u32 *msg, u16 attr_id) +{ + u32 *attr; + + /* verify pointer is not NULL */ + if (!msg) + return NULL; + + attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; + + attr[0] = attr_id; + + /* return pointer to nest header */ + return attr; +} + +/** + * fm10k_tlv_attr_nest_start - Start a set of nested attributes + * @msg: Pointer to message block + * + * This function closes off an existing set of nested attributes. The + * message pointer should be pointing to the parent of the nest. So in + * the case of a nest within the nest this would be the outer nest pointer. + * This function will return success provided all pointers are valid. + **/ +s32 fm10k_tlv_attr_nest_stop(u32 *msg) +{ + u32 *attr; + u32 len; + + /* verify pointer is not NULL */ + if (!msg) + return FM10K_ERR_PARAM; + + /* locate the nested header and retrieve its length */ + attr = &msg[FM10K_TLV_DWORD_LEN(*msg)]; + len = (attr[0] >> FM10K_TLV_LEN_SHIFT) << FM10K_TLV_LEN_SHIFT; + + /* only include nest if data was added to it */ + if (len) { + len += FM10K_TLV_HDR_LEN << FM10K_TLV_LEN_SHIFT; + *msg += len; + } + + return 0; +} + +/** + * fm10k_tlv_attr_validate - Validate attribute metadata + * @attr: Pointer to attribute + * @tlv_attr: Type and length info for attribute + * + * This function does some basic validation of the input TLV. It + * verifies the length, and in the case of null terminated strings + * it verifies that the last byte is null. The function will + * return FM10K_ERR_PARAM if any attribute is malformed, otherwise + * it returns 0. + **/ +static s32 fm10k_tlv_attr_validate(u32 *attr, + const struct fm10k_tlv_attr *tlv_attr) +{ + u32 attr_id = *attr & FM10K_TLV_ID_MASK; + u16 len = *attr >> FM10K_TLV_LEN_SHIFT; + + /* verify this is an attribute and not a message */ + if (*attr & (FM10K_TLV_FLAGS_MSG << FM10K_TLV_FLAGS_SHIFT)) + return FM10K_ERR_PARAM; + + /* search through the list of attributes to find a matching ID */ + while (tlv_attr->id < attr_id) + tlv_attr++; + + /* if didn't find a match then we should exit */ + if (tlv_attr->id != attr_id) + return FM10K_NOT_IMPLEMENTED; + + /* move to start of attribute data */ + attr++; + + switch (tlv_attr->type) { + case FM10K_TLV_NULL_STRING: + if (!len || + (attr[(len - 1) / 4] & (0xFF << (8 * ((len - 1) % 4))))) + return FM10K_ERR_PARAM; + if (len > tlv_attr->len) + return FM10K_ERR_PARAM; + break; + case FM10K_TLV_MAC_ADDR: + if (len != ETH_ALEN) + return FM10K_ERR_PARAM; + break; + case FM10K_TLV_BOOL: + if (len) + return FM10K_ERR_PARAM; + break; + case FM10K_TLV_UNSIGNED: + case FM10K_TLV_SIGNED: + if (len != tlv_attr->len) + return FM10K_ERR_PARAM; + break; + case FM10K_TLV_LE_STRUCT: + /* struct must be 4 byte aligned */ + if ((len % 4) || len != tlv_attr->len) + return FM10K_ERR_PARAM; + break; + case FM10K_TLV_NESTED: + /* nested attributes must be 4 byte aligned */ + if (len % 4) + return FM10K_ERR_PARAM; + break; + default: + /* attribute id is mapped to bad value */ + return FM10K_ERR_PARAM; + } + + return 0; +} + +/** + * fm10k_tlv_attr_parse - Parses stream of attribute data + * @attr: Pointer to attribute list + * @results: Pointer array to store pointers to attributes + * @tlv_attr: Type and length info for attributes + * + * This function validates a stream of attributes and parses them + * up into an array of pointers stored in results. The function will + * return FM10K_ERR_PARAM on any input or message error, + * FM10K_NOT_IMPLEMENTED for any attribute that is outside of the array + * and 0 on success. + **/ +s32 fm10k_tlv_attr_parse(u32 *attr, u32 **results, + const struct fm10k_tlv_attr *tlv_attr) +{ + u32 i, attr_id, offset = 0; + s32 err = 0; + u16 len; + + /* verify pointers are not NULL */ + if (!attr || !results) + return FM10K_ERR_PARAM; + + /* initialize results to NULL */ + for (i = 0; i < FM10K_TLV_RESULTS_MAX; i++) + results[i] = NULL; + + /* pull length from the message header */ + len = *attr >> FM10K_TLV_LEN_SHIFT; + + /* no attributes to parse if there is no length */ + if (!len) + return 0; + + /* no attributes to parse, just raw data, message becomes attribute */ + if (!tlv_attr) { + results[0] = attr; + return 0; + } + + /* move to start of attribute data */ + attr++; + + /* run through list parsing all attributes */ + while (offset < len) { + attr_id = *attr & FM10K_TLV_ID_MASK; + + if (attr_id < FM10K_TLV_RESULTS_MAX) + err = fm10k_tlv_attr_validate(attr, tlv_attr); + else + err = FM10K_NOT_IMPLEMENTED; + + if (err < 0) + return err; + if (!err) + results[attr_id] = attr; + + /* update offset */ + offset += FM10K_TLV_DWORD_LEN(*attr) * 4; + + /* move to next attribute */ + attr = &attr[FM10K_TLV_DWORD_LEN(*attr)]; + } + + /* we should find ourselves at the end of the list */ + if (offset != len) + return FM10K_ERR_PARAM; + + return 0; +} + +/** + * fm10k_tlv_msg_parse - Parses message header and calls function handler + * @hw: Pointer to hardware structure + * @msg: Pointer to message + * @mbx: Pointer to mailbox information structure + * @func: Function array containing list of message handling functions + * + * This function should be the first function called upon receiving a + * message. The handler will identify the message type and call the correct + * handler for the given message. It will return the value from the function + * call on a recognized message type, otherwise it will return + * FM10K_NOT_IMPLEMENTED on an unrecognized type. + **/ +s32 fm10k_tlv_msg_parse(struct fm10k_hw *hw, u32 *msg, + struct fm10k_mbx_info *mbx, + const struct fm10k_msg_data *data) +{ + u32 *results[FM10K_TLV_RESULTS_MAX]; + u32 msg_id; + s32 err; + + /* verify pointer is not NULL */ + if (!msg || !data) + return FM10K_ERR_PARAM; + + /* verify this is a message and not an attribute */ + if (!(*msg & (FM10K_TLV_FLAGS_MSG << FM10K_TLV_FLAGS_SHIFT))) + return FM10K_ERR_PARAM; + + /* grab message ID */ + msg_id = *msg & FM10K_TLV_ID_MASK; + + while (data->id < msg_id) + data++; + + /* if we didn't find it then pass it up as an error */ + if (data->id != msg_id) { + while (data->id != FM10K_TLV_ERROR) + data++; + } + + /* parse the attributes into the results list */ + err = fm10k_tlv_attr_parse(msg, results, data->attr); + if (err < 0) + return err; + + return data->func(hw, results, mbx); +} + +/** + * fm10k_tlv_msg_error - Default handler for unrecognized TLV message IDs + * @hw: Pointer to hardware structure + * @results: Pointer array to message, results[0] is pointer to message + * @mbx: Unused mailbox pointer + * + * This function is a default handler for unrecognized messages. At a + * a minimum it just indicates that the message requested was + * unimplemented. + **/ +s32 fm10k_tlv_msg_error(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + return FM10K_NOT_IMPLEMENTED; +} + +static const unsigned char test_str[] = "fm10k"; +static const unsigned char test_mac[ETH_ALEN] = { 0x12, 0x34, 0x56, + 0x78, 0x9a, 0xbc }; +static const u16 test_vlan = 0x0FED; +static const u64 test_u64 = 0xfedcba9876543210ull; +static const u32 test_u32 = 0x87654321; +static const u16 test_u16 = 0x8765; +static const u8 test_u8 = 0x87; +static const s64 test_s64 = -0x123456789abcdef0ll; +static const s32 test_s32 = -0x1235678; +static const s16 test_s16 = -0x1234; +static const s8 test_s8 = -0x12; +static const __le32 test_le[2] = { cpu_to_le32(0x12345678), + cpu_to_le32(0x9abcdef0)}; + +/* The message below is meant to be used as a test message to demonstrate + * how to use the TLV interface and to test the types. Normally this code + * be compiled out by stripping the code wrapped in FM10K_TLV_TEST_MSG + */ +const struct fm10k_tlv_attr fm10k_tlv_msg_test_attr[] = { + FM10K_TLV_ATTR_NULL_STRING(FM10K_TEST_MSG_STRING, 80), + FM10K_TLV_ATTR_MAC_ADDR(FM10K_TEST_MSG_MAC_ADDR), + FM10K_TLV_ATTR_U8(FM10K_TEST_MSG_U8), + FM10K_TLV_ATTR_U16(FM10K_TEST_MSG_U16), + FM10K_TLV_ATTR_U32(FM10K_TEST_MSG_U32), + FM10K_TLV_ATTR_U64(FM10K_TEST_MSG_U64), + FM10K_TLV_ATTR_S8(FM10K_TEST_MSG_S8), + FM10K_TLV_ATTR_S16(FM10K_TEST_MSG_S16), + FM10K_TLV_ATTR_S32(FM10K_TEST_MSG_S32), + FM10K_TLV_ATTR_S64(FM10K_TEST_MSG_S64), + FM10K_TLV_ATTR_LE_STRUCT(FM10K_TEST_MSG_LE_STRUCT, 8), + FM10K_TLV_ATTR_NESTED(FM10K_TEST_MSG_NESTED), + FM10K_TLV_ATTR_S32(FM10K_TEST_MSG_RESULT), + FM10K_TLV_ATTR_LAST +}; + +/** + * fm10k_tlv_msg_test_generate_data - Stuff message with data + * @msg: Pointer to message + * @attr_flags: List of flags indicating what attributes to add + * + * This function is meant to load a message buffer with attribute data + **/ +static void fm10k_tlv_msg_test_generate_data(u32 *msg, u32 attr_flags) +{ + if (attr_flags & (1 << FM10K_TEST_MSG_STRING)) + fm10k_tlv_attr_put_null_string(msg, FM10K_TEST_MSG_STRING, + test_str); + if (attr_flags & (1 << FM10K_TEST_MSG_MAC_ADDR)) + fm10k_tlv_attr_put_mac_vlan(msg, FM10K_TEST_MSG_MAC_ADDR, + test_mac, test_vlan); + if (attr_flags & (1 << FM10K_TEST_MSG_U8)) + fm10k_tlv_attr_put_u8(msg, FM10K_TEST_MSG_U8, test_u8); + if (attr_flags & (1 << FM10K_TEST_MSG_U16)) + fm10k_tlv_attr_put_u16(msg, FM10K_TEST_MSG_U16, test_u16); + if (attr_flags & (1 << FM10K_TEST_MSG_U32)) + fm10k_tlv_attr_put_u32(msg, FM10K_TEST_MSG_U32, test_u32); + if (attr_flags & (1 << FM10K_TEST_MSG_U64)) + fm10k_tlv_attr_put_u64(msg, FM10K_TEST_MSG_U64, test_u64); + if (attr_flags & (1 << FM10K_TEST_MSG_S8)) + fm10k_tlv_attr_put_s8(msg, FM10K_TEST_MSG_S8, test_s8); + if (attr_flags & (1 << FM10K_TEST_MSG_S16)) + fm10k_tlv_attr_put_s16(msg, FM10K_TEST_MSG_S16, test_s16); + if (attr_flags & (1 << FM10K_TEST_MSG_S32)) + fm10k_tlv_attr_put_s32(msg, FM10K_TEST_MSG_S32, test_s32); + if (attr_flags & (1 << FM10K_TEST_MSG_S64)) + fm10k_tlv_attr_put_s64(msg, FM10K_TEST_MSG_S64, test_s64); + if (attr_flags & (1 << FM10K_TEST_MSG_LE_STRUCT)) + fm10k_tlv_attr_put_le_struct(msg, FM10K_TEST_MSG_LE_STRUCT, + test_le, 8); +} + +/** + * fm10k_tlv_msg_test_create - Create a test message testing all attributes + * @msg: Pointer to message + * @attr_flags: List of flags indicating what attributes to add + * + * This function is meant to load a message buffer with all attribute types + * including a nested attribute. + **/ +void fm10k_tlv_msg_test_create(u32 *msg, u32 attr_flags) +{ + u32 *nest = NULL; + + fm10k_tlv_msg_init(msg, FM10K_TLV_MSG_ID_TEST); + + fm10k_tlv_msg_test_generate_data(msg, attr_flags); + + /* check for nested attributes */ + attr_flags >>= FM10K_TEST_MSG_NESTED; + + if (attr_flags) { + nest = fm10k_tlv_attr_nest_start(msg, FM10K_TEST_MSG_NESTED); + + fm10k_tlv_msg_test_generate_data(nest, attr_flags); + + fm10k_tlv_attr_nest_stop(msg); + } +} + +/** + * fm10k_tlv_msg_test - Validate all results on test message receive + * @hw: Pointer to hardware structure + * @results: Pointer array to attributes in the mesage + * @mbx: Pointer to mailbox information structure + * + * This function does a check to verify all attributes match what the test + * message placed in the message buffer. It is the default handler + * for TLV test messages. + **/ +s32 fm10k_tlv_msg_test(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + u32 *nest_results[FM10K_TLV_RESULTS_MAX]; + unsigned char result_str[80]; + unsigned char result_mac[ETH_ALEN]; + s32 err = 0; + __le32 result_le[2]; + u16 result_vlan; + u64 result_u64; + u32 result_u32; + u16 result_u16; + u8 result_u8; + s64 result_s64; + s32 result_s32; + s16 result_s16; + s8 result_s8; + u32 reply[3]; + + /* retrieve results of a previous test */ + if (!!results[FM10K_TEST_MSG_RESULT]) + return fm10k_tlv_attr_get_s32(results[FM10K_TEST_MSG_RESULT], + &mbx->test_result); + +parse_nested: + if (!!results[FM10K_TEST_MSG_STRING]) { + err = fm10k_tlv_attr_get_null_string( + results[FM10K_TEST_MSG_STRING], + result_str); + if (!err && memcmp(test_str, result_str, sizeof(test_str))) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_MAC_ADDR]) { + err = fm10k_tlv_attr_get_mac_vlan( + results[FM10K_TEST_MSG_MAC_ADDR], + result_mac, &result_vlan); + if (!err && memcmp(test_mac, result_mac, ETH_ALEN)) + err = FM10K_ERR_INVALID_VALUE; + if (!err && test_vlan != result_vlan) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_U8]) { + err = fm10k_tlv_attr_get_u8(results[FM10K_TEST_MSG_U8], + &result_u8); + if (!err && test_u8 != result_u8) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_U16]) { + err = fm10k_tlv_attr_get_u16(results[FM10K_TEST_MSG_U16], + &result_u16); + if (!err && test_u16 != result_u16) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_U32]) { + err = fm10k_tlv_attr_get_u32(results[FM10K_TEST_MSG_U32], + &result_u32); + if (!err && test_u32 != result_u32) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_U64]) { + err = fm10k_tlv_attr_get_u64(results[FM10K_TEST_MSG_U64], + &result_u64); + if (!err && test_u64 != result_u64) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_S8]) { + err = fm10k_tlv_attr_get_s8(results[FM10K_TEST_MSG_S8], + &result_s8); + if (!err && test_s8 != result_s8) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_S16]) { + err = fm10k_tlv_attr_get_s16(results[FM10K_TEST_MSG_S16], + &result_s16); + if (!err && test_s16 != result_s16) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_S32]) { + err = fm10k_tlv_attr_get_s32(results[FM10K_TEST_MSG_S32], + &result_s32); + if (!err && test_s32 != result_s32) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_S64]) { + err = fm10k_tlv_attr_get_s64(results[FM10K_TEST_MSG_S64], + &result_s64); + if (!err && test_s64 != result_s64) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + if (!!results[FM10K_TEST_MSG_LE_STRUCT]) { + err = fm10k_tlv_attr_get_le_struct( + results[FM10K_TEST_MSG_LE_STRUCT], + result_le, + sizeof(result_le)); + if (!err && memcmp(test_le, result_le, sizeof(test_le))) + err = FM10K_ERR_INVALID_VALUE; + if (err) + goto report_result; + } + + if (!!results[FM10K_TEST_MSG_NESTED]) { + /* clear any pointers */ + memset(nest_results, 0, sizeof(nest_results)); + + /* parse the nested attributes into the nest results list */ + err = fm10k_tlv_attr_parse(results[FM10K_TEST_MSG_NESTED], + nest_results, + fm10k_tlv_msg_test_attr); + if (err) + goto report_result; + + /* loop back through to the start */ + results = nest_results; + goto parse_nested; + } + +report_result: + /* generate reply with test result */ + fm10k_tlv_msg_init(reply, FM10K_TLV_MSG_ID_TEST); + fm10k_tlv_attr_put_s32(reply, FM10K_TEST_MSG_RESULT, err); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, reply); +} diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_tlv.h b/drivers/net/ethernet/intel/fm10k/fm10k_tlv.h new file mode 100644 index 00000000000..7e045e8bf1e --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_tlv.h @@ -0,0 +1,186 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#ifndef _FM10K_TLV_H_ +#define _FM10K_TLV_H_ + +/* forward declaration */ +struct fm10k_msg_data; + +#include "fm10k_type.h" + +/* Message / Argument header format + * 3 2 1 0 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | Length | Flags | Type / ID | + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * The message header format described here is used for messages that are + * passed between the PF and the VF. To allow for messages larger then + * mailbox size we will provide a message with the above header and it + * will be segmented and transported to the mailbox to the other side where + * it is reassembled. It contains the following fields: + * Len: Length of the message in bytes excluding the message header + * Flags: TBD + * Rule: These will be the message/argument types we pass + */ +/* message data header */ +#define FM10K_TLV_ID_SHIFT 0 +#define FM10K_TLV_ID_SIZE 16 +#define FM10K_TLV_ID_MASK ((1u << FM10K_TLV_ID_SIZE) - 1) +#define FM10K_TLV_FLAGS_SHIFT 16 +#define FM10K_TLV_FLAGS_MSG 0x1 +#define FM10K_TLV_FLAGS_SIZE 4 +#define FM10K_TLV_LEN_SHIFT 20 +#define FM10K_TLV_LEN_SIZE 12 + +#define FM10K_TLV_HDR_LEN 4ul +#define FM10K_TLV_LEN_ALIGN_MASK \ + ((FM10K_TLV_HDR_LEN - 1) << FM10K_TLV_LEN_SHIFT) +#define FM10K_TLV_LEN_ALIGN(tlv) \ + (((tlv) + FM10K_TLV_LEN_ALIGN_MASK) & ~FM10K_TLV_LEN_ALIGN_MASK) +#define FM10K_TLV_DWORD_LEN(tlv) \ + ((u16)((FM10K_TLV_LEN_ALIGN(tlv)) >> (FM10K_TLV_LEN_SHIFT + 2)) + 1) + +#define FM10K_TLV_RESULTS_MAX 32 + +enum fm10k_tlv_type { + FM10K_TLV_NULL_STRING, + FM10K_TLV_MAC_ADDR, + FM10K_TLV_BOOL, + FM10K_TLV_UNSIGNED, + FM10K_TLV_SIGNED, + FM10K_TLV_LE_STRUCT, + FM10K_TLV_NESTED, + FM10K_TLV_MAX_TYPE +}; + +#define FM10K_TLV_ERROR (~0u) + +struct fm10k_tlv_attr { + unsigned int id; + enum fm10k_tlv_type type; + u16 len; +}; + +#define FM10K_TLV_ATTR_NULL_STRING(id, len) { id, FM10K_TLV_NULL_STRING, len } +#define FM10K_TLV_ATTR_MAC_ADDR(id) { id, FM10K_TLV_MAC_ADDR, 6 } +#define FM10K_TLV_ATTR_BOOL(id) { id, FM10K_TLV_BOOL, 0 } +#define FM10K_TLV_ATTR_U8(id) { id, FM10K_TLV_UNSIGNED, 1 } +#define FM10K_TLV_ATTR_U16(id) { id, FM10K_TLV_UNSIGNED, 2 } +#define FM10K_TLV_ATTR_U32(id) { id, FM10K_TLV_UNSIGNED, 4 } +#define FM10K_TLV_ATTR_U64(id) { id, FM10K_TLV_UNSIGNED, 8 } +#define FM10K_TLV_ATTR_S8(id) { id, FM10K_TLV_SIGNED, 1 } +#define FM10K_TLV_ATTR_S16(id) { id, FM10K_TLV_SIGNED, 2 } +#define FM10K_TLV_ATTR_S32(id) { id, FM10K_TLV_SIGNED, 4 } +#define FM10K_TLV_ATTR_S64(id) { id, FM10K_TLV_SIGNED, 8 } +#define FM10K_TLV_ATTR_LE_STRUCT(id, len) { id, FM10K_TLV_LE_STRUCT, len } +#define FM10K_TLV_ATTR_NESTED(id) { id, FM10K_TLV_NESTED } +#define FM10K_TLV_ATTR_LAST { FM10K_TLV_ERROR } + +struct fm10k_msg_data { + unsigned int id; + const struct fm10k_tlv_attr *attr; + s32 (*func)(struct fm10k_hw *, u32 **, + struct fm10k_mbx_info *); +}; + +#define FM10K_MSG_HANDLER(id, attr, func) { id, attr, func } + +s32 fm10k_tlv_msg_init(u32 *, u16); +s32 fm10k_tlv_attr_put_null_string(u32 *, u16, const unsigned char *); +s32 fm10k_tlv_attr_get_null_string(u32 *, unsigned char *); +s32 fm10k_tlv_attr_put_mac_vlan(u32 *, u16, const u8 *, u16); +s32 fm10k_tlv_attr_get_mac_vlan(u32 *, u8 *, u16 *); +s32 fm10k_tlv_attr_put_bool(u32 *, u16); +s32 fm10k_tlv_attr_put_value(u32 *, u16, s64, u32); +#define fm10k_tlv_attr_put_u8(msg, attr_id, val) \ + fm10k_tlv_attr_put_value(msg, attr_id, val, 1) +#define fm10k_tlv_attr_put_u16(msg, attr_id, val) \ + fm10k_tlv_attr_put_value(msg, attr_id, val, 2) +#define fm10k_tlv_attr_put_u32(msg, attr_id, val) \ + fm10k_tlv_attr_put_value(msg, attr_id, val, 4) +#define fm10k_tlv_attr_put_u64(msg, attr_id, val) \ + fm10k_tlv_attr_put_value(msg, attr_id, val, 8) +#define fm10k_tlv_attr_put_s8(msg, attr_id, val) \ + fm10k_tlv_attr_put_value(msg, attr_id, val, 1) +#define fm10k_tlv_attr_put_s16(msg, attr_id, val) \ + fm10k_tlv_attr_put_value(msg, attr_id, val, 2) +#define fm10k_tlv_attr_put_s32(msg, attr_id, val) \ + fm10k_tlv_attr_put_value(msg, attr_id, val, 4) +#define fm10k_tlv_attr_put_s64(msg, attr_id, val) \ + fm10k_tlv_attr_put_value(msg, attr_id, val, 8) +s32 fm10k_tlv_attr_get_value(u32 *, void *, u32); +#define fm10k_tlv_attr_get_u8(attr, ptr) \ + fm10k_tlv_attr_get_value(attr, ptr, sizeof(u8)) +#define fm10k_tlv_attr_get_u16(attr, ptr) \ + fm10k_tlv_attr_get_value(attr, ptr, sizeof(u16)) +#define fm10k_tlv_attr_get_u32(attr, ptr) \ + fm10k_tlv_attr_get_value(attr, ptr, sizeof(u32)) +#define fm10k_tlv_attr_get_u64(attr, ptr) \ + fm10k_tlv_attr_get_value(attr, ptr, sizeof(u64)) +#define fm10k_tlv_attr_get_s8(attr, ptr) \ + fm10k_tlv_attr_get_value(attr, ptr, sizeof(s8)) +#define fm10k_tlv_attr_get_s16(attr, ptr) \ + fm10k_tlv_attr_get_value(attr, ptr, sizeof(s16)) +#define fm10k_tlv_attr_get_s32(attr, ptr) \ + fm10k_tlv_attr_get_value(attr, ptr, sizeof(s32)) +#define fm10k_tlv_attr_get_s64(attr, ptr) \ + fm10k_tlv_attr_get_value(attr, ptr, sizeof(s64)) +s32 fm10k_tlv_attr_put_le_struct(u32 *, u16, const void *, u32); +s32 fm10k_tlv_attr_get_le_struct(u32 *, void *, u32); +u32 *fm10k_tlv_attr_nest_start(u32 *, u16); +s32 fm10k_tlv_attr_nest_stop(u32 *); +s32 fm10k_tlv_attr_parse(u32 *, u32 **, const struct fm10k_tlv_attr *); +s32 fm10k_tlv_msg_parse(struct fm10k_hw *, u32 *, struct fm10k_mbx_info *, + const struct fm10k_msg_data *); +s32 fm10k_tlv_msg_error(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *); + +#define FM10K_TLV_MSG_ID_TEST 0 + +enum fm10k_tlv_test_attr_id { + FM10K_TEST_MSG_UNSET, + FM10K_TEST_MSG_STRING, + FM10K_TEST_MSG_MAC_ADDR, + FM10K_TEST_MSG_U8, + FM10K_TEST_MSG_U16, + FM10K_TEST_MSG_U32, + FM10K_TEST_MSG_U64, + FM10K_TEST_MSG_S8, + FM10K_TEST_MSG_S16, + FM10K_TEST_MSG_S32, + FM10K_TEST_MSG_S64, + FM10K_TEST_MSG_LE_STRUCT, + FM10K_TEST_MSG_NESTED, + FM10K_TEST_MSG_RESULT, + FM10K_TEST_MSG_MAX +}; + +extern const struct fm10k_tlv_attr fm10k_tlv_msg_test_attr[]; +void fm10k_tlv_msg_test_create(u32 *, u32); +s32 fm10k_tlv_msg_test(struct fm10k_hw *, u32 **, struct fm10k_mbx_info *); + +#define FM10K_TLV_MSG_TEST_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_TLV_MSG_ID_TEST, fm10k_tlv_msg_test_attr, func) +#define FM10K_TLV_MSG_ERROR_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_TLV_ERROR, NULL, func) +#endif /* _FM10K_MSG_H_ */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_type.h b/drivers/net/ethernet/intel/fm10k/fm10k_type.h new file mode 100644 index 00000000000..280296f2915 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_type.h @@ -0,0 +1,770 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#ifndef _FM10K_TYPE_H_ +#define _FM10K_TYPE_H_ + +/* forward declaration */ +struct fm10k_hw; + +#include <linux/types.h> +#include <asm/byteorder.h> +#include <linux/etherdevice.h> + +#include "fm10k_mbx.h" + +#define FM10K_DEV_ID_PF 0x15A4 +#define FM10K_DEV_ID_VF 0x15A5 + +#define FM10K_MAX_QUEUES 256 +#define FM10K_MAX_QUEUES_PF 128 +#define FM10K_MAX_QUEUES_POOL 16 + +#define FM10K_48_BIT_MASK 0x0000FFFFFFFFFFFFull +#define FM10K_STAT_VALID 0x80000000 + +/* PCI Bus Info */ +#define FM10K_PCIE_LINK_CAP 0x7C +#define FM10K_PCIE_LINK_STATUS 0x82 +#define FM10K_PCIE_LINK_WIDTH 0x3F0 +#define FM10K_PCIE_LINK_WIDTH_1 0x10 +#define FM10K_PCIE_LINK_WIDTH_2 0x20 +#define FM10K_PCIE_LINK_WIDTH_4 0x40 +#define FM10K_PCIE_LINK_WIDTH_8 0x80 +#define FM10K_PCIE_LINK_SPEED 0xF +#define FM10K_PCIE_LINK_SPEED_2500 0x1 +#define FM10K_PCIE_LINK_SPEED_5000 0x2 +#define FM10K_PCIE_LINK_SPEED_8000 0x3 + +/* PCIe payload size */ +#define FM10K_PCIE_DEV_CAP 0x74 +#define FM10K_PCIE_DEV_CAP_PAYLOAD 0x07 +#define FM10K_PCIE_DEV_CAP_PAYLOAD_128 0x00 +#define FM10K_PCIE_DEV_CAP_PAYLOAD_256 0x01 +#define FM10K_PCIE_DEV_CAP_PAYLOAD_512 0x02 +#define FM10K_PCIE_DEV_CTRL 0x78 +#define FM10K_PCIE_DEV_CTRL_PAYLOAD 0xE0 +#define FM10K_PCIE_DEV_CTRL_PAYLOAD_128 0x00 +#define FM10K_PCIE_DEV_CTRL_PAYLOAD_256 0x20 +#define FM10K_PCIE_DEV_CTRL_PAYLOAD_512 0x40 + +/* PCIe MSI-X Capability info */ +#define FM10K_PCI_MSIX_MSG_CTRL 0xB2 +#define FM10K_PCI_MSIX_MSG_CTRL_TBL_SZ_MASK 0x7FF +#define FM10K_MAX_MSIX_VECTORS 256 +#define FM10K_MAX_VECTORS_PF 256 +#define FM10K_MAX_VECTORS_POOL 32 + +/* PCIe SR-IOV Info */ +#define FM10K_PCIE_SRIOV_CTRL 0x190 +#define FM10K_PCIE_SRIOV_CTRL_VFARI 0x10 + +#define FM10K_ERR_PARAM -2 +#define FM10K_ERR_REQUESTS_PENDING -4 +#define FM10K_ERR_RESET_REQUESTED -5 +#define FM10K_ERR_DMA_PENDING -6 +#define FM10K_ERR_RESET_FAILED -7 +#define FM10K_ERR_INVALID_MAC_ADDR -8 +#define FM10K_ERR_INVALID_VALUE -9 +#define FM10K_NOT_IMPLEMENTED 0x7FFFFFFF + +/* Start of PF registers */ +#define FM10K_CTRL 0x0000 +#define FM10K_CTRL_BAR4_ALLOWED 0x00000004 + +#define FM10K_CTRL_EXT 0x0001 +#define FM10K_GCR 0x0003 +#define FM10K_GCR_EXT 0x0005 + +/* Interrupt control registers */ +#define FM10K_EICR 0x0006 +#define FM10K_EICR_FAULT_MASK 0x0000003F +#define FM10K_EICR_MAILBOX 0x00000040 +#define FM10K_EICR_SWITCHREADY 0x00000080 +#define FM10K_EICR_SWITCHNOTREADY 0x00000100 +#define FM10K_EICR_SWITCHINTERRUPT 0x00000200 +#define FM10K_EICR_VFLR 0x00000800 +#define FM10K_EICR_MAXHOLDTIME 0x00001000 +#define FM10K_EIMR 0x0007 +#define FM10K_EIMR_PCA_FAULT 0x00000001 +#define FM10K_EIMR_THI_FAULT 0x00000010 +#define FM10K_EIMR_FUM_FAULT 0x00000400 +#define FM10K_EIMR_MAILBOX 0x00001000 +#define FM10K_EIMR_SWITCHREADY 0x00004000 +#define FM10K_EIMR_SWITCHNOTREADY 0x00010000 +#define FM10K_EIMR_SWITCHINTERRUPT 0x00040000 +#define FM10K_EIMR_SRAMERROR 0x00100000 +#define FM10K_EIMR_VFLR 0x00400000 +#define FM10K_EIMR_MAXHOLDTIME 0x01000000 +#define FM10K_EIMR_ALL 0x55555555 +#define FM10K_EIMR_DISABLE(NAME) ((FM10K_EIMR_ ## NAME) << 0) +#define FM10K_EIMR_ENABLE(NAME) ((FM10K_EIMR_ ## NAME) << 1) +#define FM10K_FAULT_ADDR_LO 0x0 +#define FM10K_FAULT_ADDR_HI 0x1 +#define FM10K_FAULT_SPECINFO 0x2 +#define FM10K_FAULT_FUNC 0x3 +#define FM10K_FAULT_SIZE 0x4 +#define FM10K_FAULT_FUNC_VALID 0x00008000 +#define FM10K_FAULT_FUNC_PF 0x00004000 +#define FM10K_FAULT_FUNC_VF_MASK 0x00003F00 +#define FM10K_FAULT_FUNC_VF_SHIFT 8 +#define FM10K_FAULT_FUNC_TYPE_MASK 0x000000FF + +#define FM10K_PCA_FAULT 0x0008 +#define FM10K_THI_FAULT 0x0010 +#define FM10K_FUM_FAULT 0x001C + +/* Rx queue timeout indicator */ +#define FM10K_MAXHOLDQ(_n) ((_n) + 0x0020) + +/* Switch Manager info */ +#define FM10K_SM_AREA(_n) ((_n) + 0x0028) + +/* GLORT mapping registers */ +#define FM10K_DGLORTMAP(_n) ((_n) + 0x0030) +#define FM10K_DGLORT_COUNT 8 +#define FM10K_DGLORTMAP_MASK_SHIFT 16 +#define FM10K_DGLORTMAP_ANY 0x00000000 +#define FM10K_DGLORTMAP_NONE 0x0000FFFF +#define FM10K_DGLORTMAP_ZERO 0xFFFF0000 +#define FM10K_DGLORTDEC(_n) ((_n) + 0x0038) +#define FM10K_DGLORTDEC_VSILENGTH_SHIFT 4 +#define FM10K_DGLORTDEC_VSIBASE_SHIFT 7 +#define FM10K_DGLORTDEC_PCLENGTH_SHIFT 14 +#define FM10K_DGLORTDEC_QBASE_SHIFT 16 +#define FM10K_DGLORTDEC_RSSLENGTH_SHIFT 24 +#define FM10K_DGLORTDEC_INNERRSS_ENABLE 0x08000000 +#define FM10K_TUNNEL_CFG 0x0040 +#define FM10K_TUNNEL_CFG_NVGRE_SHIFT 16 +#define FM10K_SWPRI_MAP(_n) ((_n) + 0x0050) +#define FM10K_SWPRI_MAX 16 +#define FM10K_RSSRK(_n, _m) (((_n) * 0x10) + (_m) + 0x0800) +#define FM10K_RSSRK_SIZE 10 +#define FM10K_RSSRK_ENTRIES_PER_REG 4 +#define FM10K_RETA(_n, _m) (((_n) * 0x20) + (_m) + 0x1000) +#define FM10K_RETA_SIZE 32 +#define FM10K_RETA_ENTRIES_PER_REG 4 +#define FM10K_MAX_RSS_INDICES 128 + +/* Rate limiting registers */ +#define FM10K_TC_CREDIT(_n) ((_n) + 0x2000) +#define FM10K_TC_CREDIT_CREDIT_MASK 0x001FFFFF +#define FM10K_TC_MAXCREDIT(_n) ((_n) + 0x2040) +#define FM10K_TC_MAXCREDIT_64K 0x00010000 +#define FM10K_TC_RATE(_n) ((_n) + 0x2080) +#define FM10K_TC_RATE_QUANTA_MASK 0x0000FFFF +#define FM10K_TC_RATE_INTERVAL_4US_GEN1 0x00020000 +#define FM10K_TC_RATE_INTERVAL_4US_GEN2 0x00040000 +#define FM10K_TC_RATE_INTERVAL_4US_GEN3 0x00080000 + +/* DMA control registers */ +#define FM10K_DMA_CTRL 0x20C3 +#define FM10K_DMA_CTRL_TX_ENABLE 0x00000001 +#define FM10K_DMA_CTRL_TX_ACTIVE 0x00000008 +#define FM10K_DMA_CTRL_RX_ENABLE 0x00000010 +#define FM10K_DMA_CTRL_RX_ACTIVE 0x00000080 +#define FM10K_DMA_CTRL_RX_DESC_SIZE 0x00000100 +#define FM10K_DMA_CTRL_MINMSS_64 0x00008000 +#define FM10K_DMA_CTRL_MAX_HOLD_1US_GEN3 0x04800000 +#define FM10K_DMA_CTRL_MAX_HOLD_1US_GEN2 0x04000000 +#define FM10K_DMA_CTRL_MAX_HOLD_1US_GEN1 0x03800000 +#define FM10K_DMA_CTRL_DATAPATH_RESET 0x20000000 +#define FM10K_DMA_CTRL_32_DESC 0x00000000 + +#define FM10K_DMA_CTRL2 0x20C4 +#define FM10K_DMA_CTRL2_SWITCH_READY 0x00002000 + +/* TSO flags configuration + * First packet contains all flags except for fin and psh + * Middle packet contains only urg and ack + * Last packet contains urg, ack, fin, and psh + */ +#define FM10K_TSO_FLAGS_LOW 0x00300FF6 +#define FM10K_TSO_FLAGS_HI 0x00000039 +#define FM10K_DTXTCPFLGL 0x20C5 +#define FM10K_DTXTCPFLGH 0x20C6 + +#define FM10K_TPH_CTRL 0x20C7 +#define FM10K_MRQC(_n) ((_n) + 0x2100) +#define FM10K_MRQC_TCP_IPV4 0x00000001 +#define FM10K_MRQC_IPV4 0x00000002 +#define FM10K_MRQC_IPV6 0x00000010 +#define FM10K_MRQC_TCP_IPV6 0x00000020 +#define FM10K_MRQC_UDP_IPV4 0x00000040 +#define FM10K_MRQC_UDP_IPV6 0x00000080 + +#define FM10K_TQMAP(_n) ((_n) + 0x2800) +#define FM10K_TQMAP_TABLE_SIZE 2048 +#define FM10K_RQMAP(_n) ((_n) + 0x3000) + +/* Hardware Statistics */ +#define FM10K_STATS_TIMEOUT 0x3800 +#define FM10K_STATS_UR 0x3801 +#define FM10K_STATS_CA 0x3802 +#define FM10K_STATS_UM 0x3803 +#define FM10K_STATS_XEC 0x3804 +#define FM10K_STATS_VLAN_DROP 0x3805 +#define FM10K_STATS_LOOPBACK_DROP 0x3806 +#define FM10K_STATS_NODESC_DROP 0x3807 + +/* Timesync registers */ +#define FM10K_SYSTIME 0x3814 +#define FM10K_SYSTIME_CFG 0x3818 +#define FM10K_SYSTIME_CFG_STEP_MASK 0x0000000F + +/* PCIe state registers */ +#define FM10K_PHYADDR 0x381C + +/* Rx ring registers */ +#define FM10K_RDBAL(_n) ((0x40 * (_n)) + 0x4000) +#define FM10K_RDBAH(_n) ((0x40 * (_n)) + 0x4001) +#define FM10K_RDLEN(_n) ((0x40 * (_n)) + 0x4002) +#define FM10K_TPH_RXCTRL(_n) ((0x40 * (_n)) + 0x4003) +#define FM10K_TPH_RXCTRL_DESC_TPHEN 0x00000020 +#define FM10K_TPH_RXCTRL_DESC_RROEN 0x00000200 +#define FM10K_TPH_RXCTRL_DATA_WROEN 0x00002000 +#define FM10K_TPH_RXCTRL_HDR_WROEN 0x00008000 +#define FM10K_RDH(_n) ((0x40 * (_n)) + 0x4004) +#define FM10K_RDT(_n) ((0x40 * (_n)) + 0x4005) +#define FM10K_RXQCTL(_n) ((0x40 * (_n)) + 0x4006) +#define FM10K_RXQCTL_ENABLE 0x00000001 +#define FM10K_RXQCTL_PF 0x000000FC +#define FM10K_RXQCTL_VF_SHIFT 2 +#define FM10K_RXQCTL_VF 0x00000100 +#define FM10K_RXQCTL_ID_MASK (FM10K_RXQCTL_PF | FM10K_RXQCTL_VF) +#define FM10K_RXDCTL(_n) ((0x40 * (_n)) + 0x4007) +#define FM10K_RXDCTL_WRITE_BACK_MIN_DELAY 0x00000001 +#define FM10K_RXDCTL_DROP_ON_EMPTY 0x00000200 +#define FM10K_RXINT(_n) ((0x40 * (_n)) + 0x4008) +#define FM10K_SRRCTL(_n) ((0x40 * (_n)) + 0x4009) +#define FM10K_SRRCTL_BSIZEPKT_SHIFT 8 /* shift _right_ */ +#define FM10K_SRRCTL_LOOPBACK_SUPPRESS 0x40000000 +#define FM10K_SRRCTL_BUFFER_CHAINING_EN 0x80000000 + +/* Rx Statistics */ +#define FM10K_QPRC(_n) ((0x40 * (_n)) + 0x400A) +#define FM10K_QPRDC(_n) ((0x40 * (_n)) + 0x400B) +#define FM10K_QBRC_L(_n) ((0x40 * (_n)) + 0x400C) +#define FM10K_QBRC_H(_n) ((0x40 * (_n)) + 0x400D) + +/* Rx GLORT register */ +#define FM10K_RX_SGLORT(_n) ((0x40 * (_n)) + 0x400E) + +/* Tx ring registers */ +#define FM10K_TDBAL(_n) ((0x40 * (_n)) + 0x8000) +#define FM10K_TDBAH(_n) ((0x40 * (_n)) + 0x8001) +#define FM10K_TDLEN(_n) ((0x40 * (_n)) + 0x8002) +#define FM10K_TPH_TXCTRL(_n) ((0x40 * (_n)) + 0x8003) +#define FM10K_TPH_TXCTRL_DESC_TPHEN 0x00000020 +#define FM10K_TPH_TXCTRL_DESC_RROEN 0x00000200 +#define FM10K_TPH_TXCTRL_DESC_WROEN 0x00000800 +#define FM10K_TPH_TXCTRL_DATA_RROEN 0x00002000 +#define FM10K_TDH(_n) ((0x40 * (_n)) + 0x8004) +#define FM10K_TDT(_n) ((0x40 * (_n)) + 0x8005) +#define FM10K_TXDCTL(_n) ((0x40 * (_n)) + 0x8006) +#define FM10K_TXDCTL_ENABLE 0x00004000 +#define FM10K_TXDCTL_MAX_TIME_SHIFT 16 +#define FM10K_TXQCTL(_n) ((0x40 * (_n)) + 0x8007) +#define FM10K_TXQCTL_PF 0x0000003F +#define FM10K_TXQCTL_VF 0x00000040 +#define FM10K_TXQCTL_ID_MASK (FM10K_TXQCTL_PF | FM10K_TXQCTL_VF) +#define FM10K_TXQCTL_PC_SHIFT 7 +#define FM10K_TXQCTL_PC_MASK 0x00000380 +#define FM10K_TXQCTL_TC_SHIFT 10 +#define FM10K_TXQCTL_VID_SHIFT 16 +#define FM10K_TXQCTL_VID_MASK 0x0FFF0000 +#define FM10K_TXQCTL_UNLIMITED_BW 0x10000000 +#define FM10K_TXINT(_n) ((0x40 * (_n)) + 0x8008) + +/* Tx Statistics */ +#define FM10K_QPTC(_n) ((0x40 * (_n)) + 0x8009) +#define FM10K_QBTC_L(_n) ((0x40 * (_n)) + 0x800A) +#define FM10K_QBTC_H(_n) ((0x40 * (_n)) + 0x800B) + +/* Tx Push registers */ +#define FM10K_TQDLOC(_n) ((0x40 * (_n)) + 0x800C) +#define FM10K_TQDLOC_BASE_32_DESC 0x08 +#define FM10K_TQDLOC_SIZE_32_DESC 0x00050000 + +/* Tx GLORT registers */ +#define FM10K_TX_SGLORT(_n) ((0x40 * (_n)) + 0x800D) +#define FM10K_PFVTCTL(_n) ((0x40 * (_n)) + 0x800E) +#define FM10K_PFVTCTL_FTAG_DESC_ENABLE 0x00000001 + +/* Interrupt moderation and control registers */ +#define FM10K_INT_MAP(_n) ((_n) + 0x10080) +#define FM10K_INT_MAP_TIMER0 0x00000000 +#define FM10K_INT_MAP_TIMER1 0x00000100 +#define FM10K_INT_MAP_IMMEDIATE 0x00000200 +#define FM10K_INT_MAP_DISABLE 0x00000300 +#define FM10K_MSIX_VECTOR_MASK(_n) ((0x4 * (_n)) + 0x11003) +#define FM10K_INT_CTRL 0x12000 +#define FM10K_INT_CTRL_ENABLEMODERATOR 0x00000400 +#define FM10K_ITR(_n) ((_n) + 0x12400) +#define FM10K_ITR_INTERVAL1_SHIFT 12 +#define FM10K_ITR_PENDING2 0x10000000 +#define FM10K_ITR_AUTOMASK 0x20000000 +#define FM10K_ITR_MASK_SET 0x40000000 +#define FM10K_ITR_MASK_CLEAR 0x80000000 +#define FM10K_ITR2(_n) ((0x2 * (_n)) + 0x12800) +#define FM10K_ITR_REG_COUNT 768 +#define FM10K_ITR_REG_COUNT_PF 256 + +/* Switch manager interrupt registers */ +#define FM10K_IP 0x13000 +#define FM10K_IP_NOTINRESET 0x00000100 + +/* VLAN registers */ +#define FM10K_VLAN_TABLE(_n, _m) ((0x80 * (_n)) + (_m) + 0x14000) +#define FM10K_VLAN_TABLE_SIZE 128 + +/* VLAN specific message offsets */ +#define FM10K_VLAN_TABLE_VID_MAX 4096 +#define FM10K_VLAN_TABLE_VSI_MAX 64 +#define FM10K_VLAN_LENGTH_SHIFT 16 +#define FM10K_VLAN_CLEAR (1 << 15) +#define FM10K_VLAN_ALL \ + ((FM10K_VLAN_TABLE_VID_MAX - 1) << FM10K_VLAN_LENGTH_SHIFT) + +/* VF FLR event notification registers */ +#define FM10K_PFVFLRE(_n) ((0x1 * (_n)) + 0x18844) +#define FM10K_PFVFLREC(_n) ((0x1 * (_n)) + 0x18846) + +/* Defines for size of uncacheable memories */ +#define FM10K_UC_ADDR_START 0x000000 /* start of standard regs */ +#define FM10K_UC_ADDR_END 0x100000 /* end of standard regs */ +#define FM10K_UC_ADDR_SIZE (FM10K_UC_ADDR_END - FM10K_UC_ADDR_START) + +/* Define timeouts for resets and disables */ +#define FM10K_QUEUE_DISABLE_TIMEOUT 100 +#define FM10K_RESET_TIMEOUT 100 + +/* VF registers */ +#define FM10K_VFCTRL 0x00000 +#define FM10K_VFCTRL_RST 0x00000008 +#define FM10K_VFINT_MAP 0x00030 +#define FM10K_VFSYSTIME 0x00040 +#define FM10K_VFITR(_n) ((_n) + 0x00060) + +/* Registers contained in BAR 4 for Switch management */ +#define FM10K_SW_SYSTIME_ADJUST 0x0224D +#define FM10K_SW_SYSTIME_ADJUST_MASK 0x3FFFFFFF +#define FM10K_SW_SYSTIME_ADJUST_DIR_NEGATIVE 0x80000000 +#define FM10K_SW_SYSTIME_PULSE(_n) ((_n) + 0x02252) + +enum fm10k_int_source { + fm10k_int_Mailbox = 0, + fm10k_int_PCIeFault = 1, + fm10k_int_SwitchUpDown = 2, + fm10k_int_SwitchEvent = 3, + fm10k_int_SRAM = 4, + fm10k_int_VFLR = 5, + fm10k_int_MaxHoldTime = 6, + fm10k_int_sources_max_pf +}; + +/* PCIe bus speeds */ +enum fm10k_bus_speed { + fm10k_bus_speed_unknown = 0, + fm10k_bus_speed_2500 = 2500, + fm10k_bus_speed_5000 = 5000, + fm10k_bus_speed_8000 = 8000, + fm10k_bus_speed_reserved +}; + +/* PCIe bus widths */ +enum fm10k_bus_width { + fm10k_bus_width_unknown = 0, + fm10k_bus_width_pcie_x1 = 1, + fm10k_bus_width_pcie_x2 = 2, + fm10k_bus_width_pcie_x4 = 4, + fm10k_bus_width_pcie_x8 = 8, + fm10k_bus_width_reserved +}; + +/* PCIe payload sizes */ +enum fm10k_bus_payload { + fm10k_bus_payload_unknown = 0, + fm10k_bus_payload_128 = 1, + fm10k_bus_payload_256 = 2, + fm10k_bus_payload_512 = 3, + fm10k_bus_payload_reserved +}; + +/* Bus parameters */ +struct fm10k_bus_info { + enum fm10k_bus_speed speed; + enum fm10k_bus_width width; + enum fm10k_bus_payload payload; +}; + +/* Statistics related declarations */ +struct fm10k_hw_stat { + u64 count; + u32 base_l; + u32 base_h; +}; + +struct fm10k_hw_stats_q { + struct fm10k_hw_stat tx_bytes; + struct fm10k_hw_stat tx_packets; +#define tx_stats_idx tx_packets.base_h + struct fm10k_hw_stat rx_bytes; + struct fm10k_hw_stat rx_packets; +#define rx_stats_idx rx_packets.base_h + struct fm10k_hw_stat rx_drops; +}; + +struct fm10k_hw_stats { + struct fm10k_hw_stat timeout; +#define stats_idx timeout.base_h + struct fm10k_hw_stat ur; + struct fm10k_hw_stat ca; + struct fm10k_hw_stat um; + struct fm10k_hw_stat xec; + struct fm10k_hw_stat vlan_drop; + struct fm10k_hw_stat loopback_drop; + struct fm10k_hw_stat nodesc_drop; + struct fm10k_hw_stats_q q[FM10K_MAX_QUEUES_PF]; +}; + +/* Establish DGLORT feature priority */ +enum fm10k_dglortdec_idx { + fm10k_dglort_default = 0, + fm10k_dglort_vf_rsvd0 = 1, + fm10k_dglort_vf_rss = 2, + fm10k_dglort_pf_rsvd0 = 3, + fm10k_dglort_pf_queue = 4, + fm10k_dglort_pf_vsi = 5, + fm10k_dglort_pf_rsvd1 = 6, + fm10k_dglort_pf_rss = 7 +}; + +struct fm10k_dglort_cfg { + u16 glort; /* GLORT base */ + u16 queue_b; /* Base value for queue */ + u8 vsi_b; /* Base value for VSI */ + u8 idx; /* index of DGLORTDEC entry */ + u8 rss_l; /* RSS indices */ + u8 pc_l; /* Priority Class indices */ + u8 vsi_l; /* Number of bits from GLORT used to determine VSI */ + u8 queue_l; /* Number of bits from GLORT used to determine queue */ + u8 shared_l; /* Ignored bits from GLORT resulting in shared VSI */ + u8 inner_rss; /* Boolean value if inner header is used for RSS */ +}; + +enum fm10k_pca_fault { + PCA_NO_FAULT, + PCA_UNMAPPED_ADDR, + PCA_BAD_QACCESS_PF, + PCA_BAD_QACCESS_VF, + PCA_MALICIOUS_REQ, + PCA_POISONED_TLP, + PCA_TLP_ABORT, + __PCA_MAX +}; + +enum fm10k_thi_fault { + THI_NO_FAULT, + THI_MAL_DIS_Q_FAULT, + __THI_MAX +}; + +enum fm10k_fum_fault { + FUM_NO_FAULT, + FUM_UNMAPPED_ADDR, + FUM_POISONED_TLP, + FUM_BAD_VF_QACCESS, + FUM_ADD_DECODE_ERR, + FUM_RO_ERROR, + FUM_QPRC_CRC_ERROR, + FUM_CSR_TIMEOUT, + FUM_INVALID_TYPE, + FUM_INVALID_LENGTH, + FUM_INVALID_BE, + FUM_INVALID_ALIGN, + __FUM_MAX +}; + +struct fm10k_fault { + u64 address; /* Address at the time fault was detected */ + u32 specinfo; /* Extra info on this fault (fault dependent) */ + u8 type; /* Fault value dependent on subunit */ + u8 func; /* Function number of the fault */ +}; + +struct fm10k_mac_ops { + /* basic bring-up and tear-down */ + s32 (*reset_hw)(struct fm10k_hw *); + s32 (*init_hw)(struct fm10k_hw *); + s32 (*start_hw)(struct fm10k_hw *); + s32 (*stop_hw)(struct fm10k_hw *); + s32 (*get_bus_info)(struct fm10k_hw *); + s32 (*get_host_state)(struct fm10k_hw *, bool *); + bool (*is_slot_appropriate)(struct fm10k_hw *); + s32 (*update_vlan)(struct fm10k_hw *, u32, u8, bool); + s32 (*read_mac_addr)(struct fm10k_hw *); + s32 (*update_uc_addr)(struct fm10k_hw *, u16, const u8 *, + u16, bool, u8); + s32 (*update_mc_addr)(struct fm10k_hw *, u16, const u8 *, u16, bool); + s32 (*update_xcast_mode)(struct fm10k_hw *, u16, u8); + void (*update_int_moderator)(struct fm10k_hw *); + s32 (*update_lport_state)(struct fm10k_hw *, u16, u16, bool); + void (*update_hw_stats)(struct fm10k_hw *, struct fm10k_hw_stats *); + void (*rebind_hw_stats)(struct fm10k_hw *, struct fm10k_hw_stats *); + s32 (*configure_dglort_map)(struct fm10k_hw *, + struct fm10k_dglort_cfg *); + void (*set_dma_mask)(struct fm10k_hw *, u64); + s32 (*get_fault)(struct fm10k_hw *, int, struct fm10k_fault *); + void (*request_lport_map)(struct fm10k_hw *); + s32 (*adjust_systime)(struct fm10k_hw *, s32 ppb); + u64 (*read_systime)(struct fm10k_hw *); +}; + +enum fm10k_mac_type { + fm10k_mac_unknown = 0, + fm10k_mac_pf, + fm10k_mac_vf, + fm10k_num_macs +}; + +struct fm10k_mac_info { + struct fm10k_mac_ops ops; + enum fm10k_mac_type type; + u8 addr[ETH_ALEN]; + u8 perm_addr[ETH_ALEN]; + u16 default_vid; + u16 max_msix_vectors; + u16 max_queues; + bool vlan_override; + bool get_host_state; + bool tx_ready; + u32 dglort_map; +}; + +struct fm10k_swapi_table_info { + u32 used; + u32 avail; +}; + +struct fm10k_swapi_info { + u32 status; + struct fm10k_swapi_table_info mac; + struct fm10k_swapi_table_info nexthop; + struct fm10k_swapi_table_info ffu; +}; + +enum fm10k_xcast_modes { + FM10K_XCAST_MODE_ALLMULTI = 0, + FM10K_XCAST_MODE_MULTI = 1, + FM10K_XCAST_MODE_PROMISC = 2, + FM10K_XCAST_MODE_NONE = 3, + FM10K_XCAST_MODE_DISABLE = 4 +}; + +#define FM10K_VF_TC_MAX 100000 /* 100,000 Mb/s aka 100Gb/s */ +#define FM10K_VF_TC_MIN 1 /* 1 Mb/s is the slowest rate */ + +struct fm10k_vf_info { + /* mbx must be first field in struct unless all default IOV message + * handlers are redone as the assumption is that vf_info starts + * at the same offset as the mailbox + */ + struct fm10k_mbx_info mbx; /* PF side of VF mailbox */ + int rate; /* Tx BW cap as defined by OS */ + u16 glort; /* resource tag for this VF */ + u16 sw_vid; /* Switch API assigned VLAN */ + u16 pf_vid; /* PF assigned Default VLAN */ + u8 mac[ETH_ALEN]; /* PF Default MAC address */ + u8 vsi; /* VSI idenfifier */ + u8 vf_idx; /* which VF this is */ + u8 vf_flags; /* flags indicating what modes + * are supported for the port + */ +}; + +#define FM10K_VF_FLAG_ALLMULTI_CAPABLE ((u8)1 << FM10K_XCAST_MODE_ALLMULTI) +#define FM10K_VF_FLAG_MULTI_CAPABLE ((u8)1 << FM10K_XCAST_MODE_MULTI) +#define FM10K_VF_FLAG_PROMISC_CAPABLE ((u8)1 << FM10K_XCAST_MODE_PROMISC) +#define FM10K_VF_FLAG_NONE_CAPABLE ((u8)1 << FM10K_XCAST_MODE_NONE) +#define FM10K_VF_FLAG_CAPABLE(vf_info) ((vf_info)->vf_flags & (u8)0xF) +#define FM10K_VF_FLAG_ENABLED(vf_info) ((vf_info)->vf_flags >> 4) +#define FM10K_VF_FLAG_SET_MODE(mode) ((u8)0x10 << (mode)) +#define FM10K_VF_FLAG_SET_MODE_NONE \ + FM10K_VF_FLAG_SET_MODE(FM10K_XCAST_MODE_NONE) +#define FM10K_VF_FLAG_MULTI_ENABLED \ + (FM10K_VF_FLAG_SET_MODE(FM10K_XCAST_MODE_ALLMULTI) | \ + FM10K_VF_FLAG_SET_MODE(FM10K_XCAST_MODE_MULTI) | \ + FM10K_VF_FLAG_SET_MODE(FM10K_XCAST_MODE_PROMISC)) + +struct fm10k_iov_ops { + /* IOV related bring-up and tear-down */ + s32 (*assign_resources)(struct fm10k_hw *, u16, u16); + s32 (*configure_tc)(struct fm10k_hw *, u16, int); + s32 (*assign_int_moderator)(struct fm10k_hw *, u16); + s32 (*assign_default_mac_vlan)(struct fm10k_hw *, + struct fm10k_vf_info *); + s32 (*reset_resources)(struct fm10k_hw *, + struct fm10k_vf_info *); + s32 (*set_lport)(struct fm10k_hw *, struct fm10k_vf_info *, u16, u8); + void (*reset_lport)(struct fm10k_hw *, struct fm10k_vf_info *); + void (*update_stats)(struct fm10k_hw *, struct fm10k_hw_stats_q *, u16); + s32 (*report_timestamp)(struct fm10k_hw *, struct fm10k_vf_info *, u64); +}; + +struct fm10k_iov_info { + struct fm10k_iov_ops ops; + u16 total_vfs; + u16 num_vfs; + u16 num_pools; +}; + +enum fm10k_devices { + fm10k_device_pf, + fm10k_device_vf, +}; + +struct fm10k_info { + enum fm10k_mac_type mac; + s32 (*get_invariants)(struct fm10k_hw *); + struct fm10k_mac_ops *mac_ops; + struct fm10k_iov_ops *iov_ops; +}; + +struct fm10k_hw { + u32 __iomem *hw_addr; + u32 __iomem *sw_addr; + void *back; + struct fm10k_mac_info mac; + struct fm10k_bus_info bus; + struct fm10k_bus_info bus_caps; + struct fm10k_iov_info iov; + struct fm10k_mbx_info mbx; + struct fm10k_swapi_info swapi; + u16 device_id; + u16 vendor_id; + u16 subsystem_device_id; + u16 subsystem_vendor_id; + u8 revision_id; +}; + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define FM10K_REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define FM10K_REQ_RX_DESCRIPTOR_MULTIPLE 8 + +/* Transmit Descriptor */ +struct fm10k_tx_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 buflen; /* Length of data to be DMAed */ + __le16 vlan; /* VLAN_ID and VPRI to be inserted in FTAG */ + __le16 mss; /* MSS for segmentation offload */ + u8 hdrlen; /* Header size for segmentation offload */ + u8 flags; /* Status and offload request flags */ +}; + +/* Transmit Descriptor Cache Structure */ +struct fm10k_tx_desc_cache { + struct fm10k_tx_desc tx_desc[256]; +}; + +#define FM10K_TXD_FLAG_INT 0x01 +#define FM10K_TXD_FLAG_TIME 0x02 +#define FM10K_TXD_FLAG_CSUM 0x04 +#define FM10K_TXD_FLAG_FTAG 0x10 +#define FM10K_TXD_FLAG_RS 0x20 +#define FM10K_TXD_FLAG_LAST 0x40 +#define FM10K_TXD_FLAG_DONE 0x80 + +/* These macros are meant to enable optimal placement of the RS and INT + * bits. It will point us to the last descriptor in the cache for either the + * start of the packet, or the end of the packet. If the index is actually + * at the start of the FIFO it will point to the offset for the last index + * in the FIFO to prevent an unnecessary write. + */ +#define FM10K_TXD_WB_FIFO_SIZE 4 + +/* Receive Descriptor - 32B */ +union fm10k_rx_desc { + struct { + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ + __le64 reserved; /* Empty space, RSS hash */ + __le64 timestamp; + } q; /* Read, Writeback, 64b quad-words */ + struct { + __le32 data; /* RSS and header data */ + __le32 rss; /* RSS Hash */ + __le32 staterr; + __le32 vlan_len; + __le32 glort; /* sglort/dglort */ + } d; /* Writeback, 32b double-words */ + struct { + __le16 pkt_info; /* RSS, Pkt type */ + __le16 hdr_info; /* Splithdr, hdrlen, xC */ + __le16 rss_lower; + __le16 rss_upper; + __le16 status; /* status/error */ + __le16 csum_err; /* checksum or extended error value */ + __le16 length; /* Packet length */ + __le16 vlan; /* VLAN tag */ + __le16 dglort; + __le16 sglort; + } w; /* Writeback, 16b words */ +}; + +#define FM10K_RXD_RSSTYPE_MASK 0x000F +enum fm10k_rdesc_rss_type { + FM10K_RSSTYPE_NONE = 0x0, + FM10K_RSSTYPE_IPV4_TCP = 0x1, + FM10K_RSSTYPE_IPV4 = 0x2, + FM10K_RSSTYPE_IPV6_TCP = 0x3, + /* Reserved 0x4 */ + FM10K_RSSTYPE_IPV6 = 0x5, + /* Reserved 0x6 */ + FM10K_RSSTYPE_IPV4_UDP = 0x7, + FM10K_RSSTYPE_IPV6_UDP = 0x8 + /* Reserved 0x9 - 0xF */ +}; + +#define FM10K_RXD_HDR_INFO_XC_MASK 0x0006 +enum fm10k_rxdesc_xc { + FM10K_XC_UNICAST = 0x0, + FM10K_XC_MULTICAST = 0x4, + FM10K_XC_BROADCAST = 0x6 +}; + +#define FM10K_RXD_STATUS_DD 0x0001 /* Descriptor done */ +#define FM10K_RXD_STATUS_EOP 0x0002 /* End of packet */ +#define FM10K_RXD_STATUS_L4CS 0x0010 /* Indicates an L4 csum */ +#define FM10K_RXD_STATUS_L4CS2 0x0040 /* Inner header L4 csum */ +#define FM10K_RXD_STATUS_L4E2 0x0800 /* Inner header L4 csum err */ +#define FM10K_RXD_STATUS_IPE2 0x1000 /* Inner header IPv4 csum err */ +#define FM10K_RXD_STATUS_RXE 0x2000 /* Generic Rx error */ +#define FM10K_RXD_STATUS_L4E 0x4000 /* L4 csum error */ +#define FM10K_RXD_STATUS_IPE 0x8000 /* IPv4 csum error */ + +struct fm10k_ftag { + __be16 swpri_type_user; + __be16 vlan; + __be16 sglort; + __be16 dglort; +}; + +#endif /* _FM10K_TYPE_H */ diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_vf.c b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c new file mode 100644 index 00000000000..f0aa0f97b4a --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_vf.c @@ -0,0 +1,578 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#include "fm10k_vf.h" + +/** + * fm10k_stop_hw_vf - Stop Tx/Rx units + * @hw: pointer to hardware structure + * + **/ +static s32 fm10k_stop_hw_vf(struct fm10k_hw *hw) +{ + u8 *perm_addr = hw->mac.perm_addr; + u32 bal = 0, bah = 0; + s32 err; + u16 i; + + /* we need to disable the queues before taking further steps */ + err = fm10k_stop_hw_generic(hw); + if (err) + return err; + + /* If permenant address is set then we need to restore it */ + if (is_valid_ether_addr(perm_addr)) { + bal = (((u32)perm_addr[3]) << 24) | + (((u32)perm_addr[4]) << 16) | + (((u32)perm_addr[5]) << 8); + bah = (((u32)0xFF) << 24) | + (((u32)perm_addr[0]) << 16) | + (((u32)perm_addr[1]) << 8) | + ((u32)perm_addr[2]); + } + + /* The queues have already been disabled so we just need to + * update their base address registers + */ + for (i = 0; i < hw->mac.max_queues; i++) { + fm10k_write_reg(hw, FM10K_TDBAL(i), bal); + fm10k_write_reg(hw, FM10K_TDBAH(i), bah); + fm10k_write_reg(hw, FM10K_RDBAL(i), bal); + fm10k_write_reg(hw, FM10K_RDBAH(i), bah); + } + + return 0; +} + +/** + * fm10k_reset_hw_vf - VF hardware reset + * @hw: pointer to hardware structure + * + * This function should return the hardare to a state similar to the + * one it is in after just being initialized. + **/ +static s32 fm10k_reset_hw_vf(struct fm10k_hw *hw) +{ + s32 err; + + /* shut down queues we own and reset DMA configuration */ + err = fm10k_stop_hw_vf(hw); + if (err) + return err; + + /* Inititate VF reset */ + fm10k_write_reg(hw, FM10K_VFCTRL, FM10K_VFCTRL_RST); + + /* Flush write and allow 100us for reset to complete */ + fm10k_write_flush(hw); + udelay(FM10K_RESET_TIMEOUT); + + /* Clear reset bit and verify it was cleared */ + fm10k_write_reg(hw, FM10K_VFCTRL, 0); + if (fm10k_read_reg(hw, FM10K_VFCTRL) & FM10K_VFCTRL_RST) + err = FM10K_ERR_RESET_FAILED; + + return err; +} + +/** + * fm10k_init_hw_vf - VF hardware initialization + * @hw: pointer to hardware structure + * + **/ +static s32 fm10k_init_hw_vf(struct fm10k_hw *hw) +{ + u32 tqdloc, tqdloc0 = ~fm10k_read_reg(hw, FM10K_TQDLOC(0)); + s32 err; + u16 i; + + /* assume we always have at least 1 queue */ + for (i = 1; tqdloc0 && (i < FM10K_MAX_QUEUES_POOL); i++) { + /* verify the Descriptor cache offsets are increasing */ + tqdloc = ~fm10k_read_reg(hw, FM10K_TQDLOC(i)); + if (!tqdloc || (tqdloc == tqdloc0)) + break; + + /* check to verify the PF doesn't own any of our queues */ + if (!~fm10k_read_reg(hw, FM10K_TXQCTL(i)) || + !~fm10k_read_reg(hw, FM10K_RXQCTL(i))) + break; + } + + /* shut down queues we own and reset DMA configuration */ + err = fm10k_disable_queues_generic(hw, i); + if (err) + return err; + + /* record maximum queue count */ + hw->mac.max_queues = i; + + return 0; +} + +/** + * fm10k_is_slot_appropriate_vf - Indicate appropriate slot for this SKU + * @hw: pointer to hardware structure + * + * Looks at the PCIe bus info to confirm whether or not this slot can support + * the necessary bandwidth for this device. Since the VF has no control over + * the "slot" it is in, always indicate that the slot is appropriate. + **/ +static bool fm10k_is_slot_appropriate_vf(struct fm10k_hw *hw) +{ + return true; +} + +/* This structure defines the attibutes to be parsed below */ +const struct fm10k_tlv_attr fm10k_mac_vlan_msg_attr[] = { + FM10K_TLV_ATTR_U32(FM10K_MAC_VLAN_MSG_VLAN), + FM10K_TLV_ATTR_BOOL(FM10K_MAC_VLAN_MSG_SET), + FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MAC), + FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_DEFAULT_MAC), + FM10K_TLV_ATTR_MAC_ADDR(FM10K_MAC_VLAN_MSG_MULTICAST), + FM10K_TLV_ATTR_LAST +}; + +/** + * fm10k_update_vlan_vf - Update status of VLAN ID in VLAN filter table + * @hw: pointer to hardware structure + * @vid: VLAN ID to add to table + * @vsi: Reserved, should always be 0 + * @set: Indicates if this is a set or clear operation + * + * This function adds or removes the corresponding VLAN ID from the VLAN + * filter table for this VF. + **/ +static s32 fm10k_update_vlan_vf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[4]; + + /* verify the index is not set */ + if (vsi) + return FM10K_ERR_PARAM; + + /* verify upper 4 bits of vid and length are 0 */ + if ((vid << 16 | vid) >> 28) + return FM10K_ERR_PARAM; + + /* encode set bit into the VLAN ID */ + if (!set) + vid |= FM10K_VLAN_CLEAR; + + /* generate VLAN request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN); + fm10k_tlv_attr_put_u32(msg, FM10K_MAC_VLAN_MSG_VLAN, vid); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_msg_mac_vlan_vf - Read device MAC address from mailbox message + * @hw: pointer to the HW structure + * @results: Attributes for message + * @mbx: unused mailbox data + * + * This function should determine the MAC address for the VF + **/ +s32 fm10k_msg_mac_vlan_vf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + u8 perm_addr[ETH_ALEN]; + u16 vid; + s32 err; + + /* record MAC address requested */ + err = fm10k_tlv_attr_get_mac_vlan( + results[FM10K_MAC_VLAN_MSG_DEFAULT_MAC], + perm_addr, &vid); + if (err) + return err; + + ether_addr_copy(hw->mac.perm_addr, perm_addr); + hw->mac.default_vid = vid & (FM10K_VLAN_TABLE_VID_MAX - 1); + hw->mac.vlan_override = !!(vid & FM10K_VLAN_CLEAR); + + return 0; +} + +/** + * fm10k_read_mac_addr_vf - Read device MAC address + * @hw: pointer to the HW structure + * + * This function should determine the MAC address for the VF + **/ +static s32 fm10k_read_mac_addr_vf(struct fm10k_hw *hw) +{ + u8 perm_addr[ETH_ALEN]; + u32 base_addr; + + base_addr = fm10k_read_reg(hw, FM10K_TDBAL(0)); + + /* last byte should be 0 */ + if (base_addr << 24) + return FM10K_ERR_INVALID_MAC_ADDR; + + perm_addr[3] = (u8)(base_addr >> 24); + perm_addr[4] = (u8)(base_addr >> 16); + perm_addr[5] = (u8)(base_addr >> 8); + + base_addr = fm10k_read_reg(hw, FM10K_TDBAH(0)); + + /* first byte should be all 1's */ + if ((~base_addr) >> 24) + return FM10K_ERR_INVALID_MAC_ADDR; + + perm_addr[0] = (u8)(base_addr >> 16); + perm_addr[1] = (u8)(base_addr >> 8); + perm_addr[2] = (u8)(base_addr); + + ether_addr_copy(hw->mac.perm_addr, perm_addr); + ether_addr_copy(hw->mac.addr, perm_addr); + + return 0; +} + +/** + * fm10k_update_uc_addr_vf - Update device unicast address + * @hw: pointer to the HW structure + * @glort: unused + * @mac: MAC address to add/remove from table + * @vid: VLAN ID to add/remove from table + * @add: Indicates if this is an add or remove operation + * @flags: flags field to indicate add and secure - unused + * + * This function is used to add or remove unicast MAC addresses for + * the VF. + **/ +static s32 fm10k_update_uc_addr_vf(struct fm10k_hw *hw, u16 glort, + const u8 *mac, u16 vid, bool add, u8 flags) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[7]; + + /* verify VLAN ID is valid */ + if (vid >= FM10K_VLAN_TABLE_VID_MAX) + return FM10K_ERR_PARAM; + + /* verify MAC address is valid */ + if (!is_valid_ether_addr(mac)) + return FM10K_ERR_PARAM; + + /* verify we are not locked down on the MAC address */ + if (is_valid_ether_addr(hw->mac.perm_addr) && + memcmp(hw->mac.perm_addr, mac, ETH_ALEN)) + return FM10K_ERR_PARAM; + + /* add bit to notify us if this is a set of clear operation */ + if (!add) + vid |= FM10K_VLAN_CLEAR; + + /* generate VLAN request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN); + fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MAC, mac, vid); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_mc_addr_vf - Update device multicast address + * @hw: pointer to the HW structure + * @glort: unused + * @mac: MAC address to add/remove from table + * @vid: VLAN ID to add/remove from table + * @add: Indicates if this is an add or remove operation + * + * This function is used to add or remove multicast MAC addresses for + * the VF. + **/ +static s32 fm10k_update_mc_addr_vf(struct fm10k_hw *hw, u16 glort, + const u8 *mac, u16 vid, bool add) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[7]; + + /* verify VLAN ID is valid */ + if (vid >= FM10K_VLAN_TABLE_VID_MAX) + return FM10K_ERR_PARAM; + + /* verify multicast address is valid */ + if (!is_multicast_ether_addr(mac)) + return FM10K_ERR_PARAM; + + /* add bit to notify us if this is a set of clear operation */ + if (!add) + vid |= FM10K_VLAN_CLEAR; + + /* generate VLAN request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN); + fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_MULTICAST, + mac, vid); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_int_moderator_vf - Request update of interrupt moderator list + * @hw: pointer to hardware structure + * + * This function will issue a request to the PF to rescan our MSI-X table + * and to update the interrupt moderator linked list. + **/ +static void fm10k_update_int_moderator_vf(struct fm10k_hw *hw) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[1]; + + /* generate MSI-X request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MSIX); + + /* load onto outgoing mailbox */ + mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/* This structure defines the attibutes to be parsed below */ +const struct fm10k_tlv_attr fm10k_lport_state_msg_attr[] = { + FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_DISABLE), + FM10K_TLV_ATTR_U8(FM10K_LPORT_STATE_MSG_XCAST_MODE), + FM10K_TLV_ATTR_BOOL(FM10K_LPORT_STATE_MSG_READY), + FM10K_TLV_ATTR_LAST +}; + +/** + * fm10k_msg_lport_state_vf - Message handler for lport_state message from PF + * @hw: Pointer to hardware structure + * @results: pointer array containing parsed data + * @mbx: Pointer to mailbox information structure + * + * This handler is meant to capture the indication from the PF that we + * are ready to bring up the interface. + **/ +s32 fm10k_msg_lport_state_vf(struct fm10k_hw *hw, u32 **results, + struct fm10k_mbx_info *mbx) +{ + hw->mac.dglort_map = !results[FM10K_LPORT_STATE_MSG_READY] ? + FM10K_DGLORTMAP_NONE : FM10K_DGLORTMAP_ZERO; + + return 0; +} + +/** + * fm10k_update_lport_state_vf - Update device state in lower device + * @hw: pointer to the HW structure + * @glort: unused + * @count: number of logical ports to enable - unused (always 1) + * @enable: boolean value indicating if this is an enable or disable request + * + * Notify the lower device of a state change. If the lower device is + * enabled we can add filters, if it is disabled all filters for this + * logical port are flushed. + **/ +static s32 fm10k_update_lport_state_vf(struct fm10k_hw *hw, u16 glort, + u16 count, bool enable) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[2]; + + /* reset glort mask 0 as we have to wait to be enabled */ + hw->mac.dglort_map = FM10K_DGLORTMAP_NONE; + + /* generate port state request */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE); + if (!enable) + fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_DISABLE); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +/** + * fm10k_update_xcast_mode_vf - Request update of multicast mode + * @hw: pointer to hardware structure + * @glort: unused + * @mode: integer value indicating mode being requested + * + * This function will attempt to request a higher mode for the port + * so that it can enable either multicast, multicast promiscuous, or + * promiscuous mode of operation. + **/ +static s32 fm10k_update_xcast_mode_vf(struct fm10k_hw *hw, u16 glort, u8 mode) +{ + struct fm10k_mbx_info *mbx = &hw->mbx; + u32 msg[3]; + + if (mode > FM10K_XCAST_MODE_NONE) + return FM10K_ERR_PARAM; + /* generate message requesting to change xcast mode */ + fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE); + fm10k_tlv_attr_put_u8(msg, FM10K_LPORT_STATE_MSG_XCAST_MODE, mode); + + /* load onto outgoing mailbox */ + return mbx->ops.enqueue_tx(hw, mbx, msg); +} + +const struct fm10k_tlv_attr fm10k_1588_msg_attr[] = { + FM10K_TLV_ATTR_U64(FM10K_1588_MSG_TIMESTAMP), + FM10K_TLV_ATTR_LAST +}; + +/* currently there is no shared 1588 timestamp handler */ + +/** + * fm10k_update_hw_stats_vf - Updates hardware related statistics of VF + * @hw: pointer to hardware structure + * @stats: pointer to statistics structure + * + * This function collects and aggregates per queue hardware statistics. + **/ +static void fm10k_update_hw_stats_vf(struct fm10k_hw *hw, + struct fm10k_hw_stats *stats) +{ + fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues); +} + +/** + * fm10k_rebind_hw_stats_vf - Resets base for hardware statistics of VF + * @hw: pointer to hardware structure + * @stats: pointer to the stats structure to update + * + * This function resets the base for queue hardware statistics. + **/ +static void fm10k_rebind_hw_stats_vf(struct fm10k_hw *hw, + struct fm10k_hw_stats *stats) +{ + /* Unbind Queue Statistics */ + fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues); + + /* Reinitialize bases for all stats */ + fm10k_update_hw_stats_vf(hw, stats); +} + +/** + * fm10k_configure_dglort_map_vf - Configures GLORT entry and queues + * @hw: pointer to hardware structure + * @dglort: pointer to dglort configuration structure + * + * Reads the configuration structure contained in dglort_cfg and uses + * that information to then populate a DGLORTMAP/DEC entry and the queues + * to which it has been assigned. + **/ +static s32 fm10k_configure_dglort_map_vf(struct fm10k_hw *hw, + struct fm10k_dglort_cfg *dglort) +{ + /* verify the dglort pointer */ + if (!dglort) + return FM10K_ERR_PARAM; + + /* stub for now until we determine correct message for this */ + + return 0; +} + +/** + * fm10k_adjust_systime_vf - Adjust systime frequency + * @hw: pointer to hardware structure + * @ppb: adjustment rate in parts per billion + * + * This function takes an adjustment rate in parts per billion and will + * verify that this value is 0 as the VF cannot support adjusting the + * systime clock. + * + * If the ppb value is non-zero the return is ERR_PARAM else success + **/ +static s32 fm10k_adjust_systime_vf(struct fm10k_hw *hw, s32 ppb) +{ + /* The VF cannot adjust the clock frequency, however it should + * already have a syntonic clock with whichever host interface is + * running as the master for the host interface clock domain so + * there should be not frequency adjustment necessary. + */ + return ppb ? FM10K_ERR_PARAM : 0; +} + +/** + * fm10k_read_systime_vf - Reads value of systime registers + * @hw: pointer to the hardware structure + * + * Function reads the content of 2 registers, combined to represent a 64 bit + * value measured in nanosecods. In order to guarantee the value is accurate + * we check the 32 most significant bits both before and after reading the + * 32 least significant bits to verify they didn't change as we were reading + * the registers. + **/ +static u64 fm10k_read_systime_vf(struct fm10k_hw *hw) +{ + u32 systime_l, systime_h, systime_tmp; + + systime_h = fm10k_read_reg(hw, FM10K_VFSYSTIME + 1); + + do { + systime_tmp = systime_h; + systime_l = fm10k_read_reg(hw, FM10K_VFSYSTIME); + systime_h = fm10k_read_reg(hw, FM10K_VFSYSTIME + 1); + } while (systime_tmp != systime_h); + + return ((u64)systime_h << 32) | systime_l; +} + +static const struct fm10k_msg_data fm10k_msg_data_vf[] = { + FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test), + FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_msg_mac_vlan_vf), + FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf), + FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error), +}; + +static struct fm10k_mac_ops mac_ops_vf = { + .get_bus_info = &fm10k_get_bus_info_generic, + .reset_hw = &fm10k_reset_hw_vf, + .init_hw = &fm10k_init_hw_vf, + .start_hw = &fm10k_start_hw_generic, + .stop_hw = &fm10k_stop_hw_vf, + .is_slot_appropriate = &fm10k_is_slot_appropriate_vf, + .update_vlan = &fm10k_update_vlan_vf, + .read_mac_addr = &fm10k_read_mac_addr_vf, + .update_uc_addr = &fm10k_update_uc_addr_vf, + .update_mc_addr = &fm10k_update_mc_addr_vf, + .update_xcast_mode = &fm10k_update_xcast_mode_vf, + .update_int_moderator = &fm10k_update_int_moderator_vf, + .update_lport_state = &fm10k_update_lport_state_vf, + .update_hw_stats = &fm10k_update_hw_stats_vf, + .rebind_hw_stats = &fm10k_rebind_hw_stats_vf, + .configure_dglort_map = &fm10k_configure_dglort_map_vf, + .get_host_state = &fm10k_get_host_state_generic, + .adjust_systime = &fm10k_adjust_systime_vf, + .read_systime = &fm10k_read_systime_vf, +}; + +static s32 fm10k_get_invariants_vf(struct fm10k_hw *hw) +{ + fm10k_get_invariants_generic(hw); + + return fm10k_pfvf_mbx_init(hw, &hw->mbx, fm10k_msg_data_vf, 0); +} + +struct fm10k_info fm10k_vf_info = { + .mac = fm10k_mac_vf, + .get_invariants = &fm10k_get_invariants_vf, + .mac_ops = &mac_ops_vf, +}; diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_vf.h b/drivers/net/ethernet/intel/fm10k/fm10k_vf.h new file mode 100644 index 00000000000..06a99d794c9 --- /dev/null +++ b/drivers/net/ethernet/intel/fm10k/fm10k_vf.h @@ -0,0 +1,78 @@ +/* Intel Ethernet Switch Host Interface Driver + * Copyright(c) 2013 - 2014 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Contact Information: + * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + */ + +#ifndef _FM10K_VF_H_ +#define _FM10K_VF_H_ + +#include "fm10k_type.h" +#include "fm10k_common.h" + +enum fm10k_vf_tlv_msg_id { + FM10K_VF_MSG_ID_TEST = 0, /* msg ID reserved for testing */ + FM10K_VF_MSG_ID_MSIX, + FM10K_VF_MSG_ID_MAC_VLAN, + FM10K_VF_MSG_ID_LPORT_STATE, + FM10K_VF_MSG_ID_1588, + FM10K_VF_MSG_ID_MAX, +}; + +enum fm10k_tlv_mac_vlan_attr_id { + FM10K_MAC_VLAN_MSG_VLAN, + FM10K_MAC_VLAN_MSG_SET, + FM10K_MAC_VLAN_MSG_MAC, + FM10K_MAC_VLAN_MSG_DEFAULT_MAC, + FM10K_MAC_VLAN_MSG_MULTICAST, + FM10K_MAC_VLAN_MSG_ID_MAX +}; + +enum fm10k_tlv_lport_state_attr_id { + FM10K_LPORT_STATE_MSG_DISABLE, + FM10K_LPORT_STATE_MSG_XCAST_MODE, + FM10K_LPORT_STATE_MSG_READY, + FM10K_LPORT_STATE_MSG_MAX +}; + +enum fm10k_tlv_1588_attr_id { + FM10K_1588_MSG_TIMESTAMP, + FM10K_1588_MSG_MAX +}; + +#define FM10K_VF_MSG_MSIX_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_VF_MSG_ID_MSIX, NULL, func) + +s32 fm10k_msg_mac_vlan_vf(struct fm10k_hw *, u32 **, struct fm10k_mbx_info *); +extern const struct fm10k_tlv_attr fm10k_mac_vlan_msg_attr[]; +#define FM10K_VF_MSG_MAC_VLAN_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_VF_MSG_ID_MAC_VLAN, \ + fm10k_mac_vlan_msg_attr, func) + +s32 fm10k_msg_lport_state_vf(struct fm10k_hw *, u32 **, + struct fm10k_mbx_info *); +extern const struct fm10k_tlv_attr fm10k_lport_state_msg_attr[]; +#define FM10K_VF_MSG_LPORT_STATE_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_VF_MSG_ID_LPORT_STATE, \ + fm10k_lport_state_msg_attr, func) + +extern const struct fm10k_tlv_attr fm10k_1588_msg_attr[]; +#define FM10K_VF_MSG_1588_HANDLER(func) \ + FM10K_MSG_HANDLER(FM10K_VF_MSG_ID_1588, fm10k_1588_msg_attr, func) + +extern struct fm10k_info fm10k_vf_info; +#endif /* _FM10K_VF_H */ |