diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c | 2176 |
1 files changed, 2176 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c new file mode 100644 index 00000000000..4ae26a748da --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -0,0 +1,2176 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" +#include "ixgbe_mbx.h" + +#define IXGBE_82599_MAX_TX_QUEUES 128 +#define IXGBE_82599_MAX_RX_QUEUES 128 +#define IXGBE_82599_RAR_ENTRIES 128 +#define IXGBE_82599_MC_TBL_SIZE 128 +#define IXGBE_82599_VFT_TBL_SIZE 128 +#define IXGBE_82599_RX_PB_SIZE 512 + +static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); +static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); + +static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* enable the laser control functions for SFP+ fiber */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) { + mac->ops.disable_tx_laser = + &ixgbe_disable_tx_laser_multispeed_fiber; + mac->ops.enable_tx_laser = + &ixgbe_enable_tx_laser_multispeed_fiber; + mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; + } else { + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; + mac->ops.flap_tx_laser = NULL; + } + + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + } else { + if ((mac->ops.get_media_type(hw) == + ixgbe_media_type_backplane) && + (hw->phy.smart_speed == ixgbe_smart_speed_auto || + hw->phy.smart_speed == ixgbe_smart_speed_on) && + !ixgbe_verify_lesm_fw_enabled_82599(hw)) + mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed; + else + mac->ops.setup_link = &ixgbe_setup_mac_link_82599; + } +} + +static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u32 reg_anlp1 = 0; + u32 i = 0; + u16 list_offset, data_offset, data_value; + + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { + ixgbe_init_mac_link_ops_82599(hw); + + hw->phy.ops.reset = NULL; + + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto setup_sfp_out; + + /* PHY config will finish before releasing the semaphore */ + ret_val = hw->mac.ops.acquire_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); + if (ret_val != 0) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto setup_sfp_out; + } + + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + while (data_value != 0xffff) { + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); + IXGBE_WRITE_FLUSH(hw); + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + } + + /* Release the semaphore */ + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + /* + * Delay obtaining semaphore again to allow FW access, + * semaphore_delay is in ms usleep_range needs us. + */ + usleep_range(hw->eeprom.semaphore_delay * 1000, + hw->eeprom.semaphore_delay * 2000); + + /* Now restart DSP by setting Restart_AN and clearing LMS */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw, + IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) | + IXGBE_AUTOC_AN_RESTART)); + + /* Wait for AN to leave state 0 */ + for (i = 0; i < 10; i++) { + usleep_range(4000, 8000); + reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1); + if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK) + break; + } + if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) { + hw_dbg(hw, "sfp module setup not complete\n"); + ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; + goto setup_sfp_out; + } + + /* Restart DSP by setting Restart_AN and return to SFI mode */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, + IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL | + IXGBE_AUTOC_AN_RESTART)); + } + +setup_sfp_out: + return ret_val; +} + +static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + ixgbe_init_mac_link_ops_82599(hw); + + mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; + mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + return 0; +} + +/** + * ixgbe_init_phy_ops_82599 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during get_invariants because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = 0; + + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + + /* Setup function pointers based on detected SFP module and speeds */ + ixgbe_init_mac_link_ops_82599(hw); + + /* If copper media, overwrite with copper function pointers */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82599; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + /* Set necessary function pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + default: + break; + } + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @negotiation: true when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *negotiation) +{ + s32 status = 0; + u32 autoc = 0; + + /* Determine 1G link capabilities off of SFP+ type */ + if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + goto out; + } + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not been + * stored, use the current register value. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_10G_SERIAL: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: + *speed = IXGBE_LINK_SPEED_100_FULL; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_SGMII_1G_100M: + *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; + *negotiation = false; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + goto out; + break; + } + + if (hw->phy.multispeed_fiber) { + *speed |= IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + } + +out: + return status; +} + +/** + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + media_type = ixgbe_media_type_copper; + goto out; + default: + break; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_KX4: + case IXGBE_DEV_ID_82599_KX4_MEZZ: + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + case IXGBE_DEV_ID_82599_KR: + case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: + case IXGBE_DEV_ID_82599_XAUI_LOM: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82599_SFP: + case IXGBE_DEV_ID_82599_SFP_FCOE: + case IXGBE_DEV_ID_82599_SFP_EM: + case IXGBE_DEV_ID_82599_SFP_SF2: + case IXGBE_DEV_ID_82599EN_SFP: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82599_CX4: + media_type = ixgbe_media_type_cx4; + break; + case IXGBE_DEV_ID_82599_T3_LOM: + media_type = ixgbe_media_type_copper; + break; + case IXGBE_DEV_ID_82599_LS: + media_type = ixgbe_media_type_fiber_lco; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_start_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. + **/ +static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Disable tx laser; allow 100us to go dark per spec */ + esdp_reg |= IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + udelay(100); +} + +/** + * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively turning on the Tx + * laser on the PHY, effectively starting physical link. + **/ +static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Enable tx laser; allow 100ms to light up */ + esdp_reg &= ~IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + msleep(100); +} + +/** + * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser + * @hw: pointer to hardware structure + * + * When the driver changes the link speeds that it can support, + * it sets autotry_restart to true to indicate that we need to + * initiate a new autotry session with the link partner. To do + * so, we set the speed then disable and re-enable the tx laser, to + * alert the link partner that it also needs to restart autotry on its + * end. This is consistent with true clause 37 autoneg, which also + * involves a loss of signal. + **/ +static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + if (hw->mac.autotry_restart) { + ixgbe_disable_tx_laser_multispeed_fiber(hw); + ixgbe_enable_tx_laser_multispeed_fiber(hw); + hw->mac.autotry_restart = false; + } +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + u32 speedcnt = 0; + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + u32 i = 0; + bool link_up = false; + bool negotiation; + + /* Mask off requested but non-supported speeds */ + status = hw->mac.ops.get_link_capabilities(hw, &link_speed, + &negotiation); + if (status != 0) + return status; + + speed &= link_speed; + + /* + * Try each speed one by one, highest priority first. We do this in + * software because 10gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + + /* Allow module to change analog characteristics (1G->10G) */ + msleep(40); + + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg, + autoneg_wait_to_complete); + if (status != 0) + return status; + + /* Flap the tx laser if it has not already been done */ + hw->mac.ops.flap_tx_laser(hw); + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted. 82599 uses the same timing for 10g SFI. + */ + for (i = 0; i < 5; i++) { + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + return status; + + if (link_up) + goto out; + } + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + + /* Allow module to change analog characteristics (10G->1G) */ + msleep(40); + + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_1GB_FULL, + autoneg, + autoneg_wait_to_complete); + if (status != 0) + return status; + + /* Flap the tx laser if it has not already been done */ + hw->mac.ops.flap_tx_laser(hw); + + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if (link_up) + goto out; + } + + /* + * We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_multispeed_fiber(hw, + highest_link_speed, + autoneg, + autoneg_wait_to_complete); + +out: + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + return status; +} + +/** + * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Implements the Intel SmartSpeed algorithm. + **/ +static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + s32 i, j; + bool link_up = false; + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + + /* + * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the + * autoneg advertisement if link is unable to be established at the + * highest negotiated rate. This can sometimes happen due to integrity + * issues with the physical media connection. + */ + + /* First, try to get link with full advertisement */ + hw->phy.smart_speed_active = false; + for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != 0) + goto out; + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per + * Table 9 in the AN MAS. + */ + for (i = 0; i < 5; i++) { + mdelay(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + goto out; + + if (link_up) + goto out; + } + } + + /* + * We didn't get link. If we advertised KR plus one of KX4/KX + * (or BX4/BX), then disable KR and try again. + */ + if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || + ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) + goto out; + + /* Turn SmartSpeed on to disable KR support */ + hw->phy.smart_speed_active = true; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != 0) + goto out; + + /* + * Wait for the controller to acquire link. 600ms will allow for + * the AN link_fail_inhibit_timer as well for multiple cycles of + * parallel detect, both 10g and 1g. This allows for the maximum + * connect attempts as defined in the AN MAS table 73-7. + */ + for (i = 0; i < 6; i++) { + mdelay(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + goto out; + + if (link_up) + goto out; + } + + /* We didn't get link. Turn SmartSpeed back off. */ + hw->phy.smart_speed_active = false; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + +out: + if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) + hw_dbg(hw, "Smartspeed has downgraded the link speed from " + "the maximum advertised\n"); + return status; +} + +/** + * ixgbe_setup_mac_link_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 start_autoc = autoc; + u32 orig_autoc = 0; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 links_reg; + u32 i; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + + /* Check to see if speed passed in is supported. */ + hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg); + if (status != 0) + goto out; + + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) { + status = IXGBE_ERR_LINK_SETUP; + goto out; + } + + /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ + if (hw->mac.orig_link_settings_stored) + orig_autoc = hw->mac.orig_autoc; + else + orig_autoc = autoc; + + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + /* Set KX4/KX/KR support according to speed requested */ + autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && + (hw->phy.smart_speed_active == false)) + autoc |= IXGBE_AUTOC_KR_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + /* Switch from 1G SFI to 10G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; + } + } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + /* Switch from 10G SFI to 1G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + if (autoneg) + autoc |= IXGBE_AUTOC_LMS_1G_AN; + else + autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + } + } + + if (autoc != start_autoc) { + /* Restart link */ + autoc |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /*Just in case Autoneg time=0*/ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = + IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not " + "complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + } + +out: + return status; +} + +/** + * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Restarts link on PHY and MAC based on settings passed in. + **/ +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); + + return status; +} + +/** + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +{ + ixgbe_link_speed link_speed; + s32 status; + u32 ctrl, i, autoc, autoc2; + bool link_up = false; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != 0) + goto reset_hw_out; + + /* flush pending Tx transactions */ + ixgbe_clear_tx_pending(hw); + + /* PHY ops must be identified and initialized prior to reset */ + + /* Identify PHY and related function pointers */ + status = hw->phy.ops.init(hw); + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = false; + } + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Reset PHY */ + if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) + hw->phy.ops.reset(hw); + +mac_reset_top: + /* + * Issue global reset to the MAC. Needs to be SW reset if link is up. + * If link reset is used when link is up, it might reset the PHY when + * mng is using it. If link is down or the flag to force full link + * reset is set, then perform link reset. + */ + ctrl = IXGBE_CTRL_LNK_RST; + if (!hw->force_full_reset) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) + ctrl = IXGBE_CTRL_RST; + } + + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = true; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + + /* Store the alternative WWNN/WWPN prefix */ + hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, + &hw->mac.wwpn_prefix); + +reset_hw_out: + return status; +} + +/** + * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) +{ + int i; + u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); + fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; + + /* + * Before starting reinitialization process, + * FDIRCMD.CMD must be zero. + */ + for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { + if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + IXGBE_FDIRCMD_CMD_MASK)) + break; + udelay(10); + } + if (i >= IXGBE_FDIRCMD_CMD_POLL) { + hw_dbg(hw, "Flow Director previous command isn't complete, " + "aborting table re-initialization.\n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); + IXGBE_WRITE_FLUSH(hw); + /* + * 82599 adapters flow director init flow cannot be restarted, + * Workaround 82599 silicon errata by performing the following steps + * before re-writing the FDIRCTRL control register with the same value. + * - write 1 to bit 8 of FDIRCMD register & + * - write 0 to bit 8 of FDIRCMD register + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | + IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + ~IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + /* + * Clear FDIR Hash register to clear any leftover hashes + * waiting to be programmed. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); + IXGBE_WRITE_FLUSH(hw); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll init-done after we write FDIRCTRL register */ + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + udelay(10); + } + if (i >= IXGBE_FDIR_INIT_DONE_POLL) { + hw_dbg(hw, "Flow Director Signature poll time exceeded!\n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + /* Clear FDIR statistics registers (read to clear) */ + IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT); + IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT); + IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); + IXGBE_READ_REG(hw, IXGBE_FDIRMISS); + IXGBE_READ_REG(hw, IXGBE_FDIRLEN); + + return 0; +} + +/** + * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register + **/ +static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + int i; + + /* Prime the keys for hashing */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY); + + /* + * Poll init-done after we write the register. Estimated times: + * 10G: PBALLOC = 11b, timing is 60us + * 1G: PBALLOC = 11b, timing is 600us + * 100M: PBALLOC = 11b, timing is 6ms + * + * Multiple these timings by 4 if under full Rx load + * + * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for + * 1 msec per poll time. If we're at line rate and drop to 100M, then + * this might not finish in our poll time, but we can live with that + * for now. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + usleep_range(1000, 2000); + } + + if (i >= IXGBE_FDIR_INIT_DONE_POLL) + hw_dbg(hw, "Flow Director poll time exceeded!\n"); +} + +/** + * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially + * contains just the value of the Rx packet buffer allocation + **/ +s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + /* + * Continue setup of fdirctrl register bits: + * Move the flexible bytes to use the ethertype - shift 6 words + * Set the maximum length per hash bucket to 0xA filters + * Send interrupt when 64 filters are left + */ + fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | + (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | + (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); + + /* write hashes and fdirctrl register, poll for completion */ + ixgbe_fdir_enable_82599(hw, fdirctrl); + + return 0; +} + +/** + * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially + * contains just the value of the Rx packet buffer allocation + **/ +s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + /* + * Continue setup of fdirctrl register bits: + * Turn perfect match filtering on + * Report hash in RSS field of Rx wb descriptor + * Initialize the drop queue + * Move the flexible bytes to use the ethertype - shift 6 words + * Set the maximum length per hash bucket to 0xA filters + * Send interrupt when 64 (0x4 * 16) filters are left + */ + fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH | + IXGBE_FDIRCTRL_REPORT_STATUS | + (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) | + (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | + (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | + (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); + + /* write hashes and fdirctrl register, poll for completion */ + ixgbe_fdir_enable_82599(hw, fdirctrl); + + return 0; +} + +/* + * These defines allow us to quickly generate all of the necessary instructions + * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION + * for values 0 through 15 + */ +#define IXGBE_ATR_COMMON_HASH_KEY \ + (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY) +#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \ +do { \ + u32 n = (_n); \ + if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \ + common_hash ^= lo_hash_dword >> n; \ + else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ + bucket_hash ^= lo_hash_dword >> n; \ + else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \ + sig_hash ^= lo_hash_dword << (16 - n); \ + if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \ + common_hash ^= hi_hash_dword >> n; \ + else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ + bucket_hash ^= hi_hash_dword >> n; \ + else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \ + sig_hash ^= hi_hash_dword << (16 - n); \ +} while (0); + +/** + * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash + * @stream: input bitstream to compute the hash on + * + * This function is almost identical to the function above but contains + * several optomizations such as unwinding all of the loops, letting the + * compiler work out all of the conditional ifs since the keys are static + * defines, and computing two keys at once since the hashed dword stream + * will be the same for both keys. + **/ +static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common) +{ + u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; + u32 sig_hash = 0, bucket_hash = 0, common_hash = 0; + + /* record the flow_vm_vlan bits as they are a key part to the hash */ + flow_vm_vlan = ntohl(input.dword); + + /* generate common hash dword */ + hi_hash_dword = ntohl(common.dword); + + /* low dword is word swapped version of common */ + lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); + + /* apply flow ID/VM pool/VLAN ID bits to hash words */ + hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); + + /* Process bits 0 and 16 */ + IXGBE_COMPUTE_SIG_HASH_ITERATION(0); + + /* + * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to + * delay this because bit 0 of the stream should not be processed + * so we do not add the vlan until after bit 0 was processed + */ + lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); + + /* Process remaining 30 bit of the key */ + IXGBE_COMPUTE_SIG_HASH_ITERATION(1); + IXGBE_COMPUTE_SIG_HASH_ITERATION(2); + IXGBE_COMPUTE_SIG_HASH_ITERATION(3); + IXGBE_COMPUTE_SIG_HASH_ITERATION(4); + IXGBE_COMPUTE_SIG_HASH_ITERATION(5); + IXGBE_COMPUTE_SIG_HASH_ITERATION(6); + IXGBE_COMPUTE_SIG_HASH_ITERATION(7); + IXGBE_COMPUTE_SIG_HASH_ITERATION(8); + IXGBE_COMPUTE_SIG_HASH_ITERATION(9); + IXGBE_COMPUTE_SIG_HASH_ITERATION(10); + IXGBE_COMPUTE_SIG_HASH_ITERATION(11); + IXGBE_COMPUTE_SIG_HASH_ITERATION(12); + IXGBE_COMPUTE_SIG_HASH_ITERATION(13); + IXGBE_COMPUTE_SIG_HASH_ITERATION(14); + IXGBE_COMPUTE_SIG_HASH_ITERATION(15); + + /* combine common_hash result with signature and bucket hashes */ + bucket_hash ^= common_hash; + bucket_hash &= IXGBE_ATR_HASH_MASK; + + sig_hash ^= common_hash << 16; + sig_hash &= IXGBE_ATR_HASH_MASK << 16; + + /* return completed signature hash */ + return sig_hash ^ bucket_hash; +} + +/** + * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter + * @hw: pointer to hardware structure + * @input: unique input dword + * @common: compressed common input dword + * @queue: queue index to direct traffic to + **/ +s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common, + u8 queue) +{ + u64 fdirhashcmd; + u32 fdircmd; + + /* + * Get the flow_type in order to program FDIRCMD properly + * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 + */ + switch (input.formatted.flow_type) { + case IXGBE_ATR_FLOW_TYPE_TCPV4: + case IXGBE_ATR_FLOW_TYPE_UDPV4: + case IXGBE_ATR_FLOW_TYPE_SCTPV4: + case IXGBE_ATR_FLOW_TYPE_TCPV6: + case IXGBE_ATR_FLOW_TYPE_UDPV6: + case IXGBE_ATR_FLOW_TYPE_SCTPV6: + break; + default: + hw_dbg(hw, " Error on flow type input\n"); + return IXGBE_ERR_CONFIG; + } + + /* configure FDIRCMD register */ + fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; + fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; + fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + + /* + * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits + * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. + */ + fdirhashcmd = (u64)fdircmd << 32; + fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common); + IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); + + hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd); + + return 0; +} + +#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \ +do { \ + u32 n = (_n); \ + if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ + bucket_hash ^= lo_hash_dword >> n; \ + if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ + bucket_hash ^= hi_hash_dword >> n; \ +} while (0); + +/** + * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash + * @atr_input: input bitstream to compute the hash on + * @input_mask: mask for the input bitstream + * + * This function serves two main purposes. First it applys the input_mask + * to the atr_input resulting in a cleaned up atr_input data stream. + * Secondly it computes the hash and stores it in the bkt_hash field at + * the end of the input byte stream. This way it will be available for + * future use without needing to recompute the hash. + **/ +void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, + union ixgbe_atr_input *input_mask) +{ + + u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; + u32 bucket_hash = 0; + + /* Apply masks to input data */ + input->dword_stream[0] &= input_mask->dword_stream[0]; + input->dword_stream[1] &= input_mask->dword_stream[1]; + input->dword_stream[2] &= input_mask->dword_stream[2]; + input->dword_stream[3] &= input_mask->dword_stream[3]; + input->dword_stream[4] &= input_mask->dword_stream[4]; + input->dword_stream[5] &= input_mask->dword_stream[5]; + input->dword_stream[6] &= input_mask->dword_stream[6]; + input->dword_stream[7] &= input_mask->dword_stream[7]; + input->dword_stream[8] &= input_mask->dword_stream[8]; + input->dword_stream[9] &= input_mask->dword_stream[9]; + input->dword_stream[10] &= input_mask->dword_stream[10]; + + /* record the flow_vm_vlan bits as they are a key part to the hash */ + flow_vm_vlan = ntohl(input->dword_stream[0]); + + /* generate common hash dword */ + hi_hash_dword = ntohl(input->dword_stream[1] ^ + input->dword_stream[2] ^ + input->dword_stream[3] ^ + input->dword_stream[4] ^ + input->dword_stream[5] ^ + input->dword_stream[6] ^ + input->dword_stream[7] ^ + input->dword_stream[8] ^ + input->dword_stream[9] ^ + input->dword_stream[10]); + + /* low dword is word swapped version of common */ + lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); + + /* apply flow ID/VM pool/VLAN ID bits to hash words */ + hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); + + /* Process bits 0 and 16 */ + IXGBE_COMPUTE_BKT_HASH_ITERATION(0); + + /* + * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to + * delay this because bit 0 of the stream should not be processed + * so we do not add the vlan until after bit 0 was processed + */ + lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); + + /* Process remaining 30 bit of the key */ + IXGBE_COMPUTE_BKT_HASH_ITERATION(1); + IXGBE_COMPUTE_BKT_HASH_ITERATION(2); + IXGBE_COMPUTE_BKT_HASH_ITERATION(3); + IXGBE_COMPUTE_BKT_HASH_ITERATION(4); + IXGBE_COMPUTE_BKT_HASH_ITERATION(5); + IXGBE_COMPUTE_BKT_HASH_ITERATION(6); + IXGBE_COMPUTE_BKT_HASH_ITERATION(7); + IXGBE_COMPUTE_BKT_HASH_ITERATION(8); + IXGBE_COMPUTE_BKT_HASH_ITERATION(9); + IXGBE_COMPUTE_BKT_HASH_ITERATION(10); + IXGBE_COMPUTE_BKT_HASH_ITERATION(11); + IXGBE_COMPUTE_BKT_HASH_ITERATION(12); + IXGBE_COMPUTE_BKT_HASH_ITERATION(13); + IXGBE_COMPUTE_BKT_HASH_ITERATION(14); + IXGBE_COMPUTE_BKT_HASH_ITERATION(15); + + /* + * Limit hash to 13 bits since max bucket count is 8K. + * Store result at the end of the input stream. + */ + input->formatted.bkt_hash = bucket_hash & 0x1FFF; +} + +/** + * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks + * @input_mask: mask to be bit swapped + * + * The source and destination port masks for flow director are bit swapped + * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to + * generate a correctly swapped value we need to bit swap the mask and that + * is what is accomplished by this function. + **/ +static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) +{ + u32 mask = ntohs(input_mask->formatted.dst_port); + mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT; + mask |= ntohs(input_mask->formatted.src_port); + mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1); + mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2); + mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4); + return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8); +} + +/* + * These two macros are meant to address the fact that we have registers + * that are either all or in part big-endian. As a result on big-endian + * systems we will end up byte swapping the value to little-endian before + * it is byte swapped again and written to the hardware in the original + * big-endian format. + */ +#define IXGBE_STORE_AS_BE32(_value) \ + (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \ + (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24)) + +#define IXGBE_WRITE_REG_BE32(a, reg, value) \ + IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value))) + +#define IXGBE_STORE_AS_BE16(_value) \ + ntohs(((u16)(_value) >> 8) | ((u16)(_value) << 8)) + +s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input_mask) +{ + /* mask IPv6 since it is currently not supported */ + u32 fdirm = IXGBE_FDIRM_DIPv6; + u32 fdirtcpm; + + /* + * Program the relevant mask registers. If src/dst_port or src/dst_addr + * are zero, then assume a full mask for that field. Also assume that + * a VLAN of 0 is unspecified, so mask that out as well. L4type + * cannot be masked out in this implementation. + * + * This also assumes IPv4 only. IPv6 masking isn't supported at this + * point in time. + */ + + /* verify bucket hash is cleared on hash generation */ + if (input_mask->formatted.bkt_hash) + hw_dbg(hw, " bucket hash should always be 0 in mask\n"); + + /* Program FDIRM and verify partial masks */ + switch (input_mask->formatted.vm_pool & 0x7F) { + case 0x0: + fdirm |= IXGBE_FDIRM_POOL; + case 0x7F: + break; + default: + hw_dbg(hw, " Error on vm pool mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) { + case 0x0: + fdirm |= IXGBE_FDIRM_L4P; + if (input_mask->formatted.dst_port || + input_mask->formatted.src_port) { + hw_dbg(hw, " Error on src/dst port mask\n"); + return IXGBE_ERR_CONFIG; + } + case IXGBE_ATR_L4TYPE_MASK: + break; + default: + hw_dbg(hw, " Error on flow type mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) { + case 0x0000: + /* mask VLAN ID, fall through to mask VLAN priority */ + fdirm |= IXGBE_FDIRM_VLANID; + case 0x0FFF: + /* mask VLAN priority */ + fdirm |= IXGBE_FDIRM_VLANP; + break; + case 0xE000: + /* mask VLAN ID only, fall through */ + fdirm |= IXGBE_FDIRM_VLANID; + case 0xEFFF: + /* no VLAN fields masked */ + break; + default: + hw_dbg(hw, " Error on VLAN mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (input_mask->formatted.flex_bytes & 0xFFFF) { + case 0x0000: + /* Mask Flex Bytes, fall through */ + fdirm |= IXGBE_FDIRM_FLEX; + case 0xFFFF: + break; + default: + hw_dbg(hw, " Error on flexible byte mask\n"); + return IXGBE_ERR_CONFIG; + } + + /* Now mask VM pool and destination IPv6 - bits 5 and 2 */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm); + + /* store the TCP/UDP port masks, bit reversed from port layout */ + fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask); + + /* write both the same so that UDP and TCP use the same mask */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm); + IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm); + + /* store source and destination IP masks (big-enian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, + ~input_mask->formatted.src_ip[0]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, + ~input_mask->formatted.dst_ip[0]); + + return 0; +} + +s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id, u8 queue) +{ + u32 fdirport, fdirvlan, fdirhash, fdircmd; + + /* currently IPv6 is not supported, must be programmed with 0 */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), + input->formatted.src_ip[0]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), + input->formatted.src_ip[1]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), + input->formatted.src_ip[2]); + + /* record the source address (big-endian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]); + + /* record the first 32 bits of the destination address (big-endian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]); + + /* record source and destination port (little-endian)*/ + fdirport = ntohs(input->formatted.dst_port); + fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT; + fdirport |= ntohs(input->formatted.src_port); + IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport); + + /* record vlan (little-endian) and flex_bytes(big-endian) */ + fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes); + fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT; + fdirvlan |= ntohs(input->formatted.vlan_id); + IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan); + + /* configure FDIRHASH register */ + fdirhash = input->formatted.bkt_hash; + fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + + /* + * flush all previous writes to make certain registers are + * programmed prior to issuing the command + */ + IXGBE_WRITE_FLUSH(hw); + + /* configure FDIRCMD register */ + fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; + if (queue == IXGBE_FDIR_DROP_QUEUE) + fdircmd |= IXGBE_FDIRCMD_DROP; + fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; + fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT; + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); + + return 0; +} + +s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id) +{ + u32 fdirhash; + u32 fdircmd = 0; + u32 retry_count; + s32 err = 0; + + /* configure FDIRHASH register */ + fdirhash = input->formatted.bkt_hash; + fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + + /* flush hash to HW */ + IXGBE_WRITE_FLUSH(hw); + + /* Query if filter is present */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT); + + for (retry_count = 10; retry_count; retry_count--) { + /* allow 10us for query to process */ + udelay(10); + /* verify query completed successfully */ + fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); + if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK)) + break; + } + + if (!retry_count) + err = IXGBE_ERR_FDIR_REINIT_FAILED; + + /* if filter exists in hardware then remove it */ + if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) { + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + IXGBE_FDIRCMD_CMD_REMOVE_FLOW); + } + + return err; +} + +/** + * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Omer analog register specified. + **/ +static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 core_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | + (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); + *val = (u8)core_ctl; + + return 0; +} + +/** + * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Omer analog register specified. + **/ +static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 core_ctl; + + core_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + + return 0; +} + +/** + * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function + * and the generation start_hw function. + * Then performs revision-specific operations, if any. + **/ +static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + if (ret_val != 0) + goto out; + + ret_val = ixgbe_start_hw_gen2(hw); + if (ret_val != 0) + goto out; + + /* We need to run link autotry after the driver loads */ + hw->mac.autotry_restart = true; + hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE; + + if (ret_val == 0) + ret_val = ixgbe_verify_fw_version_82599(hw); +out: + return ret_val; +} + +/** + * ixgbe_identify_phy_82599 - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + * If PHY already detected, maintains current PHY type in hw struct, + * otherwise executes the PHY detection routine. + **/ +static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + + /* Detect PHY if not unknown - returns success if already detected. */ + status = ixgbe_identify_phy_generic(hw); + if (status != 0) { + /* 82599 10GBASE-T requires an external PHY */ + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) + goto out; + else + status = ixgbe_identify_sfp_module_generic(hw); + } + + /* Set PHY type none if no PHY detected */ + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.type = ixgbe_phy_none; + status = 0; + } + + /* Return error if SFP module has been detected but is not supported */ + if (hw->phy.type == ixgbe_phy_sfp_unsupported) + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + +out: + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + u8 comp_codes_10g = 0; + u8 comp_codes_1g = 0; + + hw->phy.ops.identify(hw); + + switch (hw->phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_cu_unknown: + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, + &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + default: + break; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_1000BASE_BX; + goto out; + } else + /* SFI mode so read SFP module */ + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI; + goto out; + break; + case IXGBE_AUTOC_LMS_10G_SERIAL: + if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + if (autoc & IXGBE_AUTOC_KR_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + break; + default: + goto out; + break; + } + +sfp_check: + /* SFP check must be done last since DA modules are sometimes used to + * test KR mode - we need to id KR mode correctly before SFP module. + * Call identify_sfp because the pluggable module may have changed */ + hw->phy.ops.identify_sfp(hw); + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + goto out; + + switch (hw->phy.type) { + case ixgbe_phy_sfp_passive_tyco: + case ixgbe_phy_sfp_passive_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_phy_sfp_ftl_active: + case ixgbe_phy_sfp_active_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; + break; + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit for 82599 + **/ +static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) +{ +#define IXGBE_MAX_SECRX_POLL 30 + int i; + int secrxreg; + + /* + * Workaround for 82599 silicon errata when enabling the Rx datapath. + * If traffic is incoming before we enable the Rx unit, it could hang + * the Rx DMA unit. Therefore, make sure the security engine is + * completely disabled prior to enabling the Rx unit. + */ + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg |= IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); + if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) + break; + else + /* Use interrupt-safe sleep just in case */ + udelay(10); + } + + /* For informational purposes only */ + if (i >= IXGBE_MAX_SECRX_POLL) + hw_dbg(hw, "Rx unit being enabled before security " + "path fully disabled. Continuing with init.\n"); + + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_verify_fw_version_82599 - verify fw version for 82599 + * @hw: pointer to hardware structure + * + * Verifies that installed the firmware version is 0.6 or higher + * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. + * + * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or + * if the FW version is not supported. + **/ +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM_VERSION; + u16 fw_offset, fw_ptp_cfg_offset; + u16 fw_version = 0; + + /* firmware check is only necessary for SFI devices */ + if (hw->phy.media_type != ixgbe_media_type_fiber) { + status = 0; + goto fw_version_out; + } + + /* get the offset to the Firmware Module block */ + hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + + if ((fw_offset == 0) || (fw_offset == 0xFFFF)) + goto fw_version_out; + + /* get the offset to the Pass Through Patch Configuration block */ + hw->eeprom.ops.read(hw, (fw_offset + + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), + &fw_ptp_cfg_offset); + + if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) + goto fw_version_out; + + /* get the firmware version */ + hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + + IXGBE_FW_PATCH_VERSION_4), + &fw_version); + + if (fw_version > 0x5) + status = 0; + +fw_version_out: + return status; +} + +/** + * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. + * @hw: pointer to hardware structure + * + * Returns true if the LESM FW module is present and enabled. Otherwise + * returns false. Smart Speed must be disabled if LESM FW module is enabled. + **/ +static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) +{ + bool lesm_enabled = false; + u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; + s32 status; + + /* get the offset to the Firmware Module block */ + status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + + if ((status != 0) || + (fw_offset == 0) || (fw_offset == 0xFFFF)) + goto out; + + /* get the offset to the LESM Parameters block */ + status = hw->eeprom.ops.read(hw, (fw_offset + + IXGBE_FW_LESM_PARAMETERS_PTR), + &fw_lesm_param_offset); + + if ((status != 0) || + (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF)) + goto out; + + /* get the lesm state word */ + status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset + + IXGBE_FW_LESM_STATE_1), + &fw_lesm_state); + + if ((status == 0) && + (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED)) + lesm_enabled = true; + +out: + return lesm_enabled; +} + +/** + * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using + * fastest available method + * + * @hw: pointer to hardware structure + * @offset: offset of word in EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Retrieves 16 bit word(s) read from EEPROM + **/ +static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val = IXGBE_ERR_CONFIG; + + /* + * If EEPROM is detected and can be addressed using 14 bits, + * use EERD otherwise use bit bang + */ + if ((eeprom->type == ixgbe_eeprom_spi) && + (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)) + ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words, + data); + else + ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, + words, + data); + + return ret_val; +} + +/** + * ixgbe_read_eeprom_82599 - Read EEPROM word using + * fastest available method + * + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM + **/ +static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, + u16 offset, u16 *data) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val = IXGBE_ERR_CONFIG; + + /* + * If EEPROM is detected and can be addressed using 14 bits, + * use EERD otherwise use bit bang + */ + if ((eeprom->type == ixgbe_eeprom_spi) && + (offset <= IXGBE_EERD_MAX_ADDR)) + ret_val = ixgbe_read_eerd_generic(hw, offset, data); + else + ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data); + + return ret_val; +} + +static struct ixgbe_mac_operations mac_ops_82599 = { + .init_hw = &ixgbe_init_hw_generic, + .reset_hw = &ixgbe_reset_hw_82599, + .start_hw = &ixgbe_start_hw_82599, + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, + .get_media_type = &ixgbe_get_media_type_82599, + .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, + .enable_rx_dma = &ixgbe_enable_rx_dma_82599, + .get_mac_addr = &ixgbe_get_mac_addr_generic, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, + .get_device_caps = &ixgbe_get_device_caps_generic, + .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, + .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, + .read_analog_reg8 = &ixgbe_read_analog_reg8_82599, + .write_analog_reg8 = &ixgbe_write_analog_reg8_82599, + .setup_link = &ixgbe_setup_mac_link_82599, + .set_rxpba = &ixgbe_set_rxpba_generic, + .check_link = &ixgbe_check_mac_link_generic, + .get_link_capabilities = &ixgbe_get_link_capabilities_82599, + .led_on = &ixgbe_led_on_generic, + .led_off = &ixgbe_led_off_generic, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, + .set_rar = &ixgbe_set_rar_generic, + .clear_rar = &ixgbe_clear_rar_generic, + .set_vmdq = &ixgbe_set_vmdq_generic, + .clear_vmdq = &ixgbe_clear_vmdq_generic, + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, + .enable_mc = &ixgbe_enable_mc_generic, + .disable_mc = &ixgbe_disable_mc_generic, + .clear_vfta = &ixgbe_clear_vfta_generic, + .set_vfta = &ixgbe_set_vfta_generic, + .fc_enable = &ixgbe_fc_enable_generic, + .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, + .init_uta_tables = &ixgbe_init_uta_tables_generic, + .setup_sfp = &ixgbe_setup_sfp_modules_82599, + .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, + .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, + .release_swfw_sync = &ixgbe_release_swfw_sync, + +}; + +static struct ixgbe_eeprom_operations eeprom_ops_82599 = { + .init_params = &ixgbe_init_eeprom_params_generic, + .read = &ixgbe_read_eeprom_82599, + .read_buffer = &ixgbe_read_eeprom_buffer_82599, + .write = &ixgbe_write_eeprom_generic, + .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic, + .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, + .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, + .update_checksum = &ixgbe_update_eeprom_checksum_generic, +}; + +static struct ixgbe_phy_operations phy_ops_82599 = { + .identify = &ixgbe_identify_phy_82599, + .identify_sfp = &ixgbe_identify_sfp_module_generic, + .init = &ixgbe_init_phy_ops_82599, + .reset = &ixgbe_reset_phy_generic, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_byte = &ixgbe_read_i2c_byte_generic, + .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, + .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, + .check_overtemp = &ixgbe_tn_check_overtemp, +}; + +struct ixgbe_info ixgbe_82599_info = { + .mac = ixgbe_mac_82599EB, + .get_invariants = &ixgbe_get_invariants_82599, + .mac_ops = &mac_ops_82599, + .eeprom_ops = &eeprom_ops_82599, + .phy_ops = &phy_ops_82599, + .mbx_ops = &mbx_ops_generic, +}; |