diff options
Diffstat (limited to 'drivers/net/ethernet/natsemi')
| -rw-r--r-- | drivers/net/ethernet/natsemi/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/ibmlana.c | 1075 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/ibmlana.h | 278 | ||||
| -rw-r--r-- | drivers/net/ethernet/natsemi/natsemi.c | 3 |
4 files changed, 0 insertions, 1359 deletions
diff --git a/drivers/net/ethernet/natsemi/Kconfig b/drivers/net/ethernet/natsemi/Kconfig index f157334579f..a100860d45e 100644 --- a/drivers/net/ethernet/natsemi/Kconfig +++ b/drivers/net/ethernet/natsemi/Kconfig @@ -5,9 +5,6 @@ config NET_VENDOR_NATSEMI bool "National Semi-conductor devices" default y - depends on AMIGA_PCMCIA || ARM || EISA || EXPERIMENTAL || H8300 || \ - ISA || M32R || MAC || MACH_JAZZ || MACH_TX49XX || MIPS || \ - PCI || PCMCIA || SUPERH || XTENSA_PLATFORM_XT2000 || ZORRO ---help--- If you have a network (Ethernet) card belonging to this class, say Y and read the Ethernet-HOWTO, available from diff --git a/drivers/net/ethernet/natsemi/ibmlana.c b/drivers/net/ethernet/natsemi/ibmlana.c deleted file mode 100644 index 923e640d604..00000000000 --- a/drivers/net/ethernet/natsemi/ibmlana.c +++ /dev/null @@ -1,1075 +0,0 @@ -/* -net-3-driver for the IBM LAN Adapter/A - -This is an extension to the Linux operating system, and is covered by the -same GNU General Public License that covers that work. - -Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de, - alfred.arnold@lancom.de) - -This driver is based both on the SK_MCA driver, which is itself based on the -SK_G16 and 3C523 driver. - -paper sources: - 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by - Hans-Peter Messmer for the basic Microchannel stuff - - 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer - for help on Ethernet driver programming - - 'DP83934CVUL-20/25 MHz SONIC-T Ethernet Controller Datasheet' by National - Semiconductor for info on the MAC chip - - 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 - Document Number SC30-3661-00' by IBM for info on the adapter itself - - Also see http://www.national.com/analog - -special acknowledgements to: - - Bob Eager for helping me out with documentation from IBM - - Jim Shorney for his endless patience with me while I was using - him as a beta tester to trace down the address filter bug ;-) - - Missing things: - - -> set debug level via ioctl instead of compile-time switches - -> I didn't follow the development of the 2.1.x kernels, so my - assumptions about which things changed with which kernel version - are probably nonsense - -History: - Nov 6th, 1999 - startup from SK_MCA driver - Dec 6th, 1999 - finally got docs about the card. A big thank you to Bob Eager! - Dec 12th, 1999 - first packet received - Dec 13th, 1999 - recv queue done, tcpdump works - Dec 15th, 1999 - transmission part works - Dec 28th, 1999 - added usage of the isa_functions for Linux 2.3 . Things should - still work with 2.0.x.... - Jan 28th, 2000 - in Linux 2.2.13, the version.h file mysteriously didn't get - included. Added a workaround for this. Furthermore, it now - not only compiles as a modules ;-) - Jan 30th, 2000 - newer kernels automatically probe more than one board, so the - 'startslot' as a variable is also needed here - Apr 12th, 2000 - the interrupt mask register is not set 'hard' instead of individually - setting registers, since this seems to set bits that shouldn't be - set - May 21st, 2000 - reset interrupt status immediately after CAM load - add a recovery delay after releasing the chip's reset line - May 24th, 2000 - finally found the bug in the address filter setup - damned signed - chars! - June 1st, 2000 - corrected version codes, added support for the latest 2.3 changes - Oct 28th, 2002 - cleaned up for the 2.5 tree <alan@lxorguk.ukuu.org.uk> - - *************************************************************************/ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/time.h> -#include <linux/mca.h> -#include <linux/module.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_ether.h> -#include <linux/skbuff.h> -#include <linux/bitops.h> - -#include <asm/processor.h> -#include <asm/io.h> - -#define _IBM_LANA_DRIVER_ -#include "ibmlana.h" - -#undef DEBUG - -#define DRV_NAME "ibmlana" - -/* ------------------------------------------------------------------------ - * global static data - not more since we can handle multiple boards and - * have to pack all state info into the device struct! - * ------------------------------------------------------------------------ */ - -static char *MediaNames[Media_Count] = { - "10BaseT", "10Base5", "Unknown", "10Base2" -}; - -/* ------------------------------------------------------------------------ - * private subfunctions - * ------------------------------------------------------------------------ */ - -#ifdef DEBUG - /* dump all registers */ - -static void dumpregs(struct net_device *dev) -{ - int z; - - for (z = 0; z < 160; z += 2) { - if (!(z & 15)) - printk("REGS: %04x:", z); - printk(" %04x", inw(dev->base_addr + z)); - if ((z & 15) == 14) - printk("\n"); - } -} - -/* dump parts of shared memory - only needed during debugging */ - -static void dumpmem(struct net_device *dev, u32 start, u32 len) -{ - ibmlana_priv *priv = netdev_priv(dev); - int z; - - printk("Address %04x:\n", start); - for (z = 0; z < len; z++) { - if ((z & 15) == 0) - printk("%04x:", z); - printk(" %02x", readb(priv->base + start + z)); - if ((z & 15) == 15) - printk("\n"); - } - if ((z & 15) != 0) - printk("\n"); -} - -/* print exact time - ditto */ - -static void PrTime(void) -{ - struct timeval tv; - - do_gettimeofday(&tv); - printk("%9d:%06d: ", (int) tv.tv_sec, (int) tv.tv_usec); -} -#endif /* DEBUG */ - -/* deduce resources out of POS registers */ - -static void getaddrs(struct mca_device *mdev, int *base, int *memlen, - int *iobase, int *irq, ibmlana_medium *medium) -{ - u_char pos0, pos1; - - pos0 = mca_device_read_stored_pos(mdev, 2); - pos1 = mca_device_read_stored_pos(mdev, 3); - - *base = 0xc0000 + ((pos1 & 0xf0) << 9); - *memlen = (pos1 & 0x01) ? 0x8000 : 0x4000; - *iobase = (pos0 & 0xe0) << 7; - switch (pos0 & 0x06) { - case 0: - *irq = 5; - break; - case 2: - *irq = 15; - break; - case 4: - *irq = 10; - break; - case 6: - *irq = 11; - break; - } - *medium = (pos0 & 0x18) >> 3; -} - -/* wait on register value with mask and timeout */ - -static int wait_timeout(struct net_device *dev, int regoffs, u16 mask, - u16 value, int timeout) -{ - unsigned long fin = jiffies + timeout; - - while (time_before(jiffies,fin)) - if ((inw(dev->base_addr + regoffs) & mask) == value) - return 1; - - return 0; -} - - -/* reset the whole board */ - -static void ResetBoard(struct net_device *dev) -{ - unsigned char bcmval; - - /* read original board control value */ - - bcmval = inb(dev->base_addr + BCMREG); - - /* set reset bit for a while */ - - bcmval |= BCMREG_RESET; - outb(bcmval, dev->base_addr + BCMREG); - udelay(10); - bcmval &= ~BCMREG_RESET; - outb(bcmval, dev->base_addr + BCMREG); - - /* switch over to RAM again */ - - bcmval |= BCMREG_RAMEN | BCMREG_RAMWIN; - outb(bcmval, dev->base_addr + BCMREG); -} - -/* calculate RAM layout & set up descriptors in RAM */ - -static void InitDscrs(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - u32 addr, baddr, raddr; - int z; - tda_t tda; - rda_t rda; - rra_t rra; - - /* initialize RAM */ - - memset_io(priv->base, 0xaa, - dev->mem_start - dev->mem_start); /* XXX: typo? */ - - /* setup n TX descriptors - independent of RAM size */ - - priv->tdastart = addr = 0; - priv->txbufstart = baddr = sizeof(tda_t) * TXBUFCNT; - for (z = 0; z < TXBUFCNT; z++) { - tda.status = 0; - tda.config = 0; - tda.length = 0; - tda.fragcount = 1; - tda.startlo = baddr; - tda.starthi = 0; - tda.fraglength = 0; - if (z == TXBUFCNT - 1) - tda.link = priv->tdastart; - else - tda.link = addr + sizeof(tda_t); - tda.link |= 1; - memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); - addr += sizeof(tda_t); - baddr += PKTSIZE; - } - - /* calculate how many receive buffers fit into remaining memory */ - - priv->rxbufcnt = (dev->mem_end - dev->mem_start - baddr) / (sizeof(rra_t) + sizeof(rda_t) + PKTSIZE); - - /* calculate receive addresses */ - - priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE); - priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)); - priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t)); - - for (z = 0; z < priv->rxbufcnt; z++) { - rra.startlo = baddr; - rra.starthi = 0; - rra.cntlo = PKTSIZE >> 1; - rra.cnthi = 0; - memcpy_toio(priv->base + raddr, &rra, sizeof(rra_t)); - - rda.status = 0; - rda.length = 0; - rda.startlo = 0; - rda.starthi = 0; - rda.seqno = 0; - if (z < priv->rxbufcnt - 1) - rda.link = addr + sizeof(rda_t); - else - rda.link = 1; - rda.inuse = 1; - memcpy_toio(priv->base + addr, &rda, sizeof(rda_t)); - - baddr += PKTSIZE; - raddr += sizeof(rra_t); - addr += sizeof(rda_t); - } - - /* initialize current pointers */ - - priv->nextrxdescr = 0; - priv->lastrxdescr = priv->rxbufcnt - 1; - priv->nexttxdescr = 0; - priv->currtxdescr = 0; - priv->txusedcnt = 0; - memset(priv->txused, 0, sizeof(priv->txused)); -} - -/* set up Rx + Tx descriptors in SONIC */ - -static int InitSONIC(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - - /* set up start & end of resource area */ - - outw(0, SONIC_URRA); - outw(priv->rrastart, dev->base_addr + SONIC_RSA); - outw(priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)), dev->base_addr + SONIC_REA); - outw(priv->rrastart, dev->base_addr + SONIC_RRP); - outw(priv->rrastart, dev->base_addr + SONIC_RWP); - - /* set EOBC so that only one packet goes into one buffer */ - - outw((PKTSIZE - 4) >> 1, dev->base_addr + SONIC_EOBC); - - /* let SONIC read the first RRA descriptor */ - - outw(CMDREG_RRRA, dev->base_addr + SONIC_CMDREG); - if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_RRRA, 0, 2)) { - printk(KERN_ERR "%s: SONIC did not respond on RRRA command - giving up.", dev->name); - return 0; - } - - /* point SONIC to the first RDA */ - - outw(0, dev->base_addr + SONIC_URDA); - outw(priv->rdastart, dev->base_addr + SONIC_CRDA); - - /* set upper half of TDA address */ - - outw(0, dev->base_addr + SONIC_UTDA); - - return 1; -} - -/* stop SONIC so we can reinitialize it */ - -static void StopSONIC(struct net_device *dev) -{ - /* disable interrupts */ - - outb(inb(dev->base_addr + BCMREG) & (~BCMREG_IEN), dev->base_addr + BCMREG); - outb(0, dev->base_addr + SONIC_IMREG); - - /* reset the SONIC */ - - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - udelay(10); - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); -} - -/* initialize card and SONIC for proper operation */ - -static void putcam(camentry_t * cams, int *camcnt, char *addr) -{ - camentry_t *pcam = cams + (*camcnt); - u8 *uaddr = (u8 *) addr; - - pcam->index = *camcnt; - pcam->addr0 = (((u16) uaddr[1]) << 8) | uaddr[0]; - pcam->addr1 = (((u16) uaddr[3]) << 8) | uaddr[2]; - pcam->addr2 = (((u16) uaddr[5]) << 8) | uaddr[4]; - (*camcnt)++; -} - -static void InitBoard(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - int camcnt; - camentry_t cams[16]; - u32 cammask; - struct netdev_hw_addr *ha; - u16 rcrval; - - /* reset the SONIC */ - - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - udelay(10); - - /* clear all spurious interrupts */ - - outw(inw(dev->base_addr + SONIC_ISREG), dev->base_addr + SONIC_ISREG); - - /* set up the SONIC's bus interface - constant for this adapter - - must be done while the SONIC is in reset */ - - outw(DCREG_USR1 | DCREG_USR0 | DCREG_WC1 | DCREG_DW32, dev->base_addr + SONIC_DCREG); - outw(0, dev->base_addr + SONIC_DCREG2); - - /* remove reset form the SONIC */ - - outw(0, dev->base_addr + SONIC_CMDREG); - udelay(10); - - /* data sheet requires URRA to be programmed before setting up the CAM contents */ - - outw(0, dev->base_addr + SONIC_URRA); - - /* program the CAM entry 0 to the device address */ - - camcnt = 0; - putcam(cams, &camcnt, dev->dev_addr); - - /* start putting the multicast addresses into the CAM list. Stop if - it is full. */ - - netdev_for_each_mc_addr(ha, dev) { - putcam(cams, &camcnt, ha->addr); - if (camcnt == 16) - break; - } - - /* calculate CAM mask */ - - cammask = (1 << camcnt) - 1; - - /* feed CDA into SONIC, initialize RCR value (always get broadcasts) */ - - memcpy_toio(priv->base, cams, sizeof(camentry_t) * camcnt); - memcpy_toio(priv->base + (sizeof(camentry_t) * camcnt), &cammask, sizeof(cammask)); - -#ifdef DEBUG - printk("CAM setup:\n"); - dumpmem(dev, 0, sizeof(camentry_t) * camcnt + sizeof(cammask)); -#endif - - outw(0, dev->base_addr + SONIC_CAMPTR); - outw(camcnt, dev->base_addr + SONIC_CAMCNT); - outw(CMDREG_LCAM, dev->base_addr + SONIC_CMDREG); - if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_LCAM, 0, 2)) { - printk(KERN_ERR "%s:SONIC did not respond on LCAM command - giving up.", dev->name); - return; - } else { - /* clear interrupt condition */ - - outw(ISREG_LCD, dev->base_addr + SONIC_ISREG); - -#ifdef DEBUG - printk("Loading CAM done, address pointers %04x:%04x\n", - inw(dev->base_addr + SONIC_URRA), - inw(dev->base_addr + SONIC_CAMPTR)); - { - int z; - - printk("\n-->CAM: PTR %04x CNT %04x\n", - inw(dev->base_addr + SONIC_CAMPTR), - inw(dev->base_addr + SONIC_CAMCNT)); - outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); - for (z = 0; z < camcnt; z++) { - outw(z, dev->base_addr + SONIC_CAMEPTR); - printk("Entry %d: %04x %04x %04x\n", z, - inw(dev->base_addr + SONIC_CAMADDR0), - inw(dev->base_addr + SONIC_CAMADDR1), - inw(dev->base_addr + SONIC_CAMADDR2)); - } - outw(0, dev->base_addr + SONIC_CMDREG); - } -#endif - } - - rcrval = RCREG_BRD | RCREG_LB_NONE; - - /* if still multicast addresses left or ALLMULTI is set, set the multicast - enable bit */ - - if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt) - rcrval |= RCREG_AMC; - - /* promiscuous mode ? */ - - if (dev->flags & IFF_PROMISC) - rcrval |= RCREG_PRO; - - /* program receive mode */ - - outw(rcrval, dev->base_addr + SONIC_RCREG); -#ifdef DEBUG - printk("\nRCRVAL: %04x\n", rcrval); -#endif - - /* set up descriptors in shared memory + feed them into SONIC registers */ - - InitDscrs(dev); - if (!InitSONIC(dev)) - return; - - /* reset all pending interrupts */ - - outw(0xffff, dev->base_addr + SONIC_ISREG); - - /* enable transmitter + receiver interrupts */ - - outw(CMDREG_RXEN, dev->base_addr + SONIC_CMDREG); - outw(IMREG_PRXEN | IMREG_RBEEN | IMREG_PTXEN | IMREG_TXEREN, dev->base_addr + SONIC_IMREG); - - /* turn on card interrupts */ - - outb(inb(dev->base_addr + BCMREG) | BCMREG_IEN, dev->base_addr + BCMREG); - -#ifdef DEBUG - printk("Register dump after initialization:\n"); - dumpregs(dev); -#endif -} - -/* start transmission of a descriptor */ - -static void StartTx(struct net_device *dev, int descr) -{ - ibmlana_priv *priv = netdev_priv(dev); - int addr; - - addr = priv->tdastart + (descr * sizeof(tda_t)); - - /* put descriptor address into SONIC */ - - outw(addr, dev->base_addr + SONIC_CTDA); - - /* trigger transmitter */ - - priv->currtxdescr = descr; - outw(CMDREG_TXP, dev->base_addr + SONIC_CMDREG); -} - -/* ------------------------------------------------------------------------ - * interrupt handler(s) - * ------------------------------------------------------------------------ */ - -/* receive buffer area exhausted */ - -static void irqrbe_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - - /* point the SONIC back to the RRA start */ - - outw(priv->rrastart, dev->base_addr + SONIC_RRP); - outw(priv->rrastart, dev->base_addr + SONIC_RWP); -} - -/* receive interrupt */ - -static void irqrx_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - rda_t rda; - u32 rdaaddr, lrdaaddr; - - /* loop until ... */ - - while (1) { - /* read descriptor that was next to be filled by SONIC */ - - rdaaddr = priv->rdastart + (priv->nextrxdescr * sizeof(rda_t)); - lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t)); - memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t)); - - /* iron out upper word halves of fields we use - SONIC will duplicate - bits 0..15 to 16..31 */ - - rda.status &= 0xffff; - rda.length &= 0xffff; - rda.startlo &= 0xffff; - - /* stop if the SONIC still owns it, i.e. there is no data for us */ - - if (rda.inuse) - break; - - /* good packet? */ - - else if (rda.status & RCREG_PRX) { - struct sk_buff *skb; - - /* fetch buffer */ - - skb = netdev_alloc_skb(dev, rda.length + 2); - if (skb == NULL) - dev->stats.rx_dropped++; - else { - /* copy out data */ - - memcpy_fromio(skb_put(skb, rda.length), - priv->base + - rda.startlo, rda.length); - - /* set up skb fields */ - - skb->protocol = eth_type_trans(skb, dev); - skb_checksum_none_assert(skb); - - /* bookkeeping */ - dev->stats.rx_packets++; - dev->stats.rx_bytes += rda.length; - - /* pass to the upper layers */ - netif_rx(skb); - } - } - - /* otherwise check error status bits and increase statistics */ - - else { - dev->stats.rx_errors++; - if (rda.status & RCREG_FAER) - dev->stats.rx_frame_errors++; - if (rda.status & RCREG_CRCR) - dev->stats.rx_crc_errors++; - } - - /* descriptor processed, will become new last descriptor in queue */ - - rda.link = 1; - rda.inuse = 1; - memcpy_toio(priv->base + rdaaddr, &rda, - sizeof(rda_t)); - - /* set up link and EOL = 0 in currently last descriptor. Only write - the link field since the SONIC may currently already access the - other fields. */ - - memcpy_toio(priv->base + lrdaaddr + 20, &rdaaddr, 4); - - /* advance indices */ - - priv->lastrxdescr = priv->nextrxdescr; - if ((++priv->nextrxdescr) >= priv->rxbufcnt) - priv->nextrxdescr = 0; - } -} - -/* transmit interrupt */ - -static void irqtx_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - tda_t tda; - - /* fetch descriptor (we forgot the size ;-) */ - memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); - - /* update statistics */ - dev->stats.tx_packets++; - dev->stats.tx_bytes += tda.length; - - /* update our pointers */ - priv->txused[priv->currtxdescr] = 0; - priv->txusedcnt--; - - /* if there are more descriptors present in RAM, start them */ - if (priv->txusedcnt > 0) - StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); - - /* tell the upper layer we can go on transmitting */ - netif_wake_queue(dev); -} - -static void irqtxerr_handler(struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - tda_t tda; - - /* fetch descriptor to check status */ - memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); - - /* update statistics */ - dev->stats.tx_errors++; - if (tda.status & (TCREG_NCRS | TCREG_CRSL)) - dev->stats.tx_carrier_errors++; - if (tda.status & TCREG_EXC) - dev->stats.tx_aborted_errors++; - if (tda.status & TCREG_OWC) - dev->stats.tx_window_errors++; - if (tda.status & TCREG_FU) - dev->stats.tx_fifo_errors++; - - /* update our pointers */ - priv->txused[priv->currtxdescr] = 0; - priv->txusedcnt--; - - /* if there are more descriptors present in RAM, start them */ - if (priv->txusedcnt > 0) - StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); - - /* tell the upper layer we can go on transmitting */ - netif_wake_queue(dev); -} - -/* general interrupt entry */ - -static irqreturn_t irq_handler(int dummy, void *device) -{ - struct net_device *dev = device; - u16 ival; - - /* in case we're not meant... */ - if (!(inb(dev->base_addr + BCMREG) & BCMREG_IPEND)) - return IRQ_NONE; - - /* loop through the interrupt bits until everything is clear */ - while (1) { - ival = inw(dev->base_addr + SONIC_ISREG); - - if (ival & ISREG_RBE) { - irqrbe_handler(dev); - outw(ISREG_RBE, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_PKTRX) { - irqrx_handler(dev); - outw(ISREG_PKTRX, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_TXDN) { - irqtx_handler(dev); - outw(ISREG_TXDN, dev->base_addr + SONIC_ISREG); - } - if (ival & ISREG_TXER) { - irqtxerr_handler(dev); - outw(ISREG_TXER, dev->base_addr + SONIC_ISREG); - } - break; - } - return IRQ_HANDLED; -} - -/* ------------------------------------------------------------------------ - * driver methods - * ------------------------------------------------------------------------ */ - -/* MCA info */ - -#if 0 /* info available elsewhere, but this is kept for reference */ -static int ibmlana_getinfo(char *buf, int slot, void *d) -{ - int len = 0, i; - struct net_device *dev = (struct net_device *) d; - ibmlana_priv *priv; - - /* can't say anything about an uninitialized device... */ - - if (dev == NULL) - return len; - priv = netdev_priv(dev); - - /* print info */ - - len += sprintf(buf + len, "IRQ: %d\n", priv->realirq); - len += sprintf(buf + len, "I/O: %#lx\n", dev->base_addr); - len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, dev->mem_end - 1); - len += sprintf(buf + len, "Transceiver: %s\n", MediaNames[priv->medium]); - len += sprintf(buf + len, "Device: %s\n", dev->name); - len += sprintf(buf + len, "MAC address:"); - for (i = 0; i < 6; i++) - len += sprintf(buf + len, " %02x", dev->dev_addr[i]); - buf[len++] = '\n'; - buf[len] = 0; - - return len; -} -#endif - -/* open driver. Means also initialization and start of LANCE */ - -static int ibmlana_open(struct net_device *dev) -{ - int result; - ibmlana_priv *priv = netdev_priv(dev); - - /* register resources - only necessary for IRQ */ - - result = request_irq(priv->realirq, irq_handler, IRQF_SHARED, - dev->name, dev); - if (result != 0) { - printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq); - return result; - } - dev->irq = priv->realirq; - - /* set up the card and SONIC */ - InitBoard(dev); - - /* initialize operational flags */ - netif_start_queue(dev); - return 0; -} - -/* close driver. Shut down board and free allocated resources */ - -static int ibmlana_close(struct net_device *dev) -{ - /* turn off board */ - - /* release resources */ - if (dev->irq != 0) - free_irq(dev->irq, dev); - dev->irq = 0; - return 0; -} - -/* transmit a block. */ - -static netdev_tx_t ibmlana_tx(struct sk_buff *skb, struct net_device *dev) -{ - ibmlana_priv *priv = netdev_priv(dev); - int tmplen, addr; - unsigned long flags; - tda_t tda; - int baddr; - - /* find out if there are free slots for a frame to transmit. If not, - the upper layer is in deep desperation and we simply ignore the frame. */ - - if (priv->txusedcnt >= TXBUFCNT) { - dev->stats.tx_dropped++; - goto tx_done; - } - - /* copy the frame data into the next free transmit buffer - fillup missing */ - tmplen = skb->len; - if (tmplen < 60) - tmplen = 60; - baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE); - memcpy_toio(priv->base + baddr, skb->data, skb->len); - - /* copy filler into RAM - in case we're filling up... - we're filling a bit more than necessary, but that doesn't harm - since the buffer is far larger... - Sorry Linus for the filler string but I couldn't resist ;-) */ - - if (tmplen > skb->len) { - char *fill = "NetBSD is a nice OS too! "; - unsigned int destoffs = skb->len, l = strlen(fill); - - while (destoffs < tmplen) { - memcpy_toio(priv->base + baddr + destoffs, fill, l); - destoffs += l; - } - } - - /* set up the new frame descriptor */ - addr = priv->tdastart + (priv->nexttxdescr * sizeof(tda_t)); - memcpy_fromio(&tda, priv->base + addr, sizeof(tda_t)); - tda.length = tda.fraglength = tmplen; - memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); - - /* if there were no active descriptors, trigger the SONIC */ - spin_lock_irqsave(&priv->lock, flags); - - priv->txusedcnt++; - priv->txused[priv->nexttxdescr] = 1; - - /* are all transmission slots used up ? */ - if (priv->txusedcnt >= TXBUFCNT) - netif_stop_queue(dev); - - if (priv->txusedcnt == 1) - StartTx(dev, priv->nexttxdescr); - priv->nexttxdescr = (priv->nexttxdescr + 1) % TXBUFCNT; - - spin_unlock_irqrestore(&priv->lock, flags); -tx_done: - dev_kfree_skb(skb); - return NETDEV_TX_OK; -} - -/* switch receiver mode. */ - -static void ibmlana_set_multicast_list(struct net_device *dev) -{ - /* first stop the SONIC... */ - StopSONIC(dev); - /* ...then reinit it with the new flags */ - InitBoard(dev); -} - -/* ------------------------------------------------------------------------ - * hardware check - * ------------------------------------------------------------------------ */ - -static int ibmlana_irq; -static int ibmlana_io; -static int startslot; /* counts through slots when probing multiple devices */ - -static short ibmlana_adapter_ids[] __initdata = { - IBM_LANA_ID, - 0x0000 -}; - -static char *ibmlana_adapter_names[] = { - "IBM LAN Adapter/A", - NULL -}; - - -static const struct net_device_ops ibmlana_netdev_ops = { - .ndo_open = ibmlana_open, - .ndo_stop = ibmlana_close, - .ndo_start_xmit = ibmlana_tx, - .ndo_set_rx_mode = ibmlana_set_multicast_list, - .ndo_change_mtu = eth_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -}; - -static int ibmlana_init_one(struct device *kdev) -{ - struct mca_device *mdev = to_mca_device(kdev); - struct net_device *dev; - int slot = mdev->slot, z, rc; - int base = 0, irq = 0, iobase = 0, memlen = 0; - ibmlana_priv *priv; - ibmlana_medium medium; - - dev = alloc_etherdev(sizeof(ibmlana_priv)); - if (!dev) - return -ENOMEM; - - dev->irq = ibmlana_irq; - dev->base_addr = ibmlana_io; - - base = dev->mem_start; - irq = dev->irq; - - /* deduce card addresses */ - getaddrs(mdev, &base, &memlen, &iobase, &irq, &medium); - - /* were we looking for something different ? */ - if (dev->irq && dev->irq != irq) { - rc = -ENODEV; - goto err_out; - } - if (dev->mem_start && dev->mem_start != base) { - rc = -ENODEV; - goto err_out; - } - - /* announce success */ - printk(KERN_INFO "%s: IBM LAN Adapter/A found in slot %d\n", dev->name, slot + 1); - - /* try to obtain I/O range */ - if (!request_region(iobase, IBM_LANA_IORANGE, DRV_NAME)) { - printk(KERN_ERR "%s: cannot allocate I/O range at %#x!\n", DRV_NAME, iobase); - startslot = slot + 1; - rc = -EBUSY; - goto err_out; - } - - priv = netdev_priv(dev); - priv->slot = slot; - priv->realirq = mca_device_transform_irq(mdev, irq); - priv->medium = medium; - spin_lock_init(&priv->lock); - - /* set base + irq for this device (irq not allocated so far) */ - - dev->irq = 0; - dev->mem_start = base; - dev->mem_end = base + memlen; - dev->base_addr = iobase; - - priv->base = ioremap(base, memlen); - if (!priv->base) { - printk(KERN_ERR "%s: cannot remap memory!\n", DRV_NAME); - startslot = slot + 1; - rc = -EBUSY; - goto err_out_reg; - } - - mca_device_set_name(mdev, ibmlana_adapter_names[mdev->index]); - mca_device_set_claim(mdev, 1); - - /* set methods */ - dev->netdev_ops = &ibmlana_netdev_ops; - dev->flags |= IFF_MULTICAST; - - /* copy out MAC address */ - - for (z = 0; z < ETH_ALEN; z++) - dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); - - /* print config */ - - printk(KERN_INFO "%s: IRQ %d, I/O %#lx, memory %#lx-%#lx, " - "MAC address %pM.\n", - dev->name, priv->realirq, dev->base_addr, - dev->mem_start, dev->mem_end - 1, - dev->dev_addr); - printk(KERN_INFO "%s: %s medium\n", dev->name, MediaNames[priv->medium]); - - /* reset board */ - - ResetBoard(dev); - - /* next probe will start at next slot */ - - startslot = slot + 1; - - rc = register_netdev(dev); - if (rc) - goto err_out_claimed; - - dev_set_drvdata(kdev, dev); - return 0; - -err_out_claimed: - mca_device_set_claim(mdev, 0); - iounmap(priv->base); -err_out_reg: - release_region(iobase, IBM_LANA_IORANGE); -err_out: - free_netdev(dev); - return rc; -} - -static int ibmlana_remove_one(struct device *kdev) -{ - struct mca_device *mdev = to_mca_device(kdev); - struct net_device *dev = dev_get_drvdata(kdev); - ibmlana_priv *priv = netdev_priv(dev); - - unregister_netdev(dev); - /*DeinitBoard(dev); */ - release_region(dev->base_addr, IBM_LANA_IORANGE); - mca_device_set_claim(mdev, 0); - iounmap(priv->base); - free_netdev(dev); - return 0; -} - -/* ------------------------------------------------------------------------ - * modularization support - * ------------------------------------------------------------------------ */ - -module_param_named(irq, ibmlana_irq, int, 0); -module_param_named(io, ibmlana_io, int, 0); -MODULE_PARM_DESC(irq, "IBM LAN/A IRQ number"); -MODULE_PARM_DESC(io, "IBM LAN/A I/O base address"); -MODULE_LICENSE("GPL"); - -static struct mca_driver ibmlana_driver = { - .id_table = ibmlana_adapter_ids, - .driver = { - .name = "ibmlana", - .bus = &mca_bus_type, - .probe = ibmlana_init_one, - .remove = ibmlana_remove_one, - }, -}; - -static int __init ibmlana_init_module(void) -{ - return mca_register_driver(&ibmlana_driver); -} - -static void __exit ibmlana_cleanup_module(void) -{ - mca_unregister_driver(&ibmlana_driver); -} - -module_init(ibmlana_init_module); -module_exit(ibmlana_cleanup_module); diff --git a/drivers/net/ethernet/natsemi/ibmlana.h b/drivers/net/ethernet/natsemi/ibmlana.h deleted file mode 100644 index accd5efc9c8..00000000000 --- a/drivers/net/ethernet/natsemi/ibmlana.h +++ /dev/null @@ -1,278 +0,0 @@ -#ifndef _IBM_LANA_INCLUDE_ -#define _IBM_LANA_INCLUDE_ - -#ifdef _IBM_LANA_DRIVER_ - -/* maximum packet size */ - -#define PKTSIZE 1524 - -/* number of transmit buffers */ - -#define TXBUFCNT 4 - -/* Adapter ID's */ -#define IBM_LANA_ID 0xffe0 - -/* media enumeration - defined in a way that it fits onto the LAN/A's - POS registers... */ - -typedef enum { - Media_10BaseT, Media_10Base5, - Media_Unknown, Media_10Base2, Media_Count -} ibmlana_medium; - -/* private structure */ - -typedef struct { - unsigned int slot; /* MCA-Slot-# */ - int realirq; /* memorizes actual IRQ, even when - currently not allocated */ - ibmlana_medium medium; /* physical cannector */ - u32 tdastart, txbufstart, /* addresses */ - rrastart, rxbufstart, rdastart, rxbufcnt, txusedcnt; - int nextrxdescr, /* next rx descriptor to be used */ - lastrxdescr, /* last free rx descriptor */ - nexttxdescr, /* last tx descriptor to be used */ - currtxdescr, /* tx descriptor currently tx'ed */ - txused[TXBUFCNT]; /* busy flags */ - void __iomem *base; - spinlock_t lock; -} ibmlana_priv; - -/* this card uses quite a lot of I/O ports...luckily the MCA bus decodes - a full 64K I/O range... */ - -#define IBM_LANA_IORANGE 0xa0 - -/* Command Register: */ - -#define SONIC_CMDREG 0x00 -#define CMDREG_HTX 0x0001 /* halt transmission */ -#define CMDREG_TXP 0x0002 /* start transmission */ -#define CMDREG_RXDIS 0x0004 /* disable receiver */ -#define CMDREG_RXEN 0x0008 /* enable receiver */ -#define CMDREG_STP 0x0010 /* stop timer */ -#define CMDREG_ST 0x0020 /* start timer */ -#define CMDREG_RST 0x0080 /* software reset */ -#define CMDREG_RRRA 0x0100 /* force SONIC to read first RRA */ -#define CMDREG_LCAM 0x0200 /* force SONIC to read CAM descrs */ - -/* Data Configuration Register */ - -#define SONIC_DCREG 0x02 -#define DCREG_EXBUS 0x8000 /* Extended Bus Mode */ -#define DCREG_LBR 0x2000 /* Latched Bus Retry */ -#define DCREG_PO1 0x1000 /* Programmable Outputs */ -#define DCREG_PO0 0x0800 -#define DCREG_SBUS 0x0400 /* Synchronous Bus Mode */ -#define DCREG_USR1 0x0200 /* User Definable Pins */ -#define DCREG_USR0 0x0100 -#define DCREG_WC0 0x0000 /* 0..3 Wait States */ -#define DCREG_WC1 0x0040 -#define DCREG_WC2 0x0080 -#define DCREG_WC3 0x00c0 -#define DCREG_DW16 0x0000 /* 16 bit Bus Mode */ -#define DCREG_DW32 0x0020 /* 32 bit Bus Mode */ -#define DCREG_BMS 0x0010 /* Block Mode Select */ -#define DCREG_RFT4 0x0000 /* 4/8/16/24 bytes RX Threshold */ -#define DCREG_RFT8 0x0004 -#define DCREG_RFT16 0x0008 -#define DCREG_RFT24 0x000c -#define DCREG_TFT8 0x0000 /* 8/16/24/28 bytes TX Threshold */ -#define DCREG_TFT16 0x0001 -#define DCREG_TFT24 0x0002 -#define DCREG_TFT28 0x0003 - -/* Receive Control Register */ - -#define SONIC_RCREG 0x04 -#define RCREG_ERR 0x8000 /* accept damaged and collided pkts */ -#define RCREG_RNT 0x4000 /* accept packets that are < 64 */ -#define RCREG_BRD 0x2000 /* accept broadcasts */ -#define RCREG_PRO 0x1000 /* promiscuous mode */ -#define RCREG_AMC 0x0800 /* accept all multicasts */ -#define RCREG_LB_NONE 0x0000 /* no loopback */ -#define RCREG_LB_MAC 0x0200 /* MAC loopback */ -#define RCREG_LB_ENDEC 0x0400 /* ENDEC loopback */ -#define RCREG_LB_XVR 0x0600 /* Transceiver loopback */ -#define RCREG_MC 0x0100 /* Multicast received */ -#define RCREG_BC 0x0080 /* Broadcast received */ -#define RCREG_LPKT 0x0040 /* last packet in RBA */ -#define RCREG_CRS 0x0020 /* carrier sense present */ -#define RCREG_COL 0x0010 /* recv'd packet with collision */ -#define RCREG_CRCR 0x0008 /* recv'd packet with CRC error */ -#define RCREG_FAER 0x0004 /* recv'd packet with inv. framing */ -#define RCREG_LBK 0x0002 /* recv'd loopback packet */ -#define RCREG_PRX 0x0001 /* recv'd packet is OK */ - -/* Transmit Control Register */ - -#define SONIC_TCREG 0x06 -#define TCREG_PINT 0x8000 /* generate interrupt after TDA read */ -#define TCREG_POWC 0x4000 /* timer start out of window detect */ -#define TCREG_CRCI 0x2000 /* inhibit CRC generation */ -#define TCREG_EXDIS 0x1000 /* disable excessive deferral timer */ -#define TCREG_EXD 0x0400 /* excessive deferral occurred */ -#define TCREG_DEF 0x0200 /* single deferral occurred */ -#define TCREG_NCRS 0x0100 /* no carrier detected */ -#define TCREG_CRSL 0x0080 /* carrier lost */ -#define TCREG_EXC 0x0040 /* excessive collisions occurred */ -#define TCREG_OWC 0x0020 /* out of window collision occurred */ -#define TCREG_PMB 0x0008 /* packet monitored bad */ -#define TCREG_FU 0x0004 /* FIFO underrun */ -#define TCREG_BCM 0x0002 /* byte count mismatch of fragments */ -#define TCREG_PTX 0x0001 /* packet transmitted OK */ - -/* Interrupt Mask Register */ - -#define SONIC_IMREG 0x08 -#define IMREG_BREN 0x4000 /* interrupt when bus retry occurred */ -#define IMREG_HBLEN 0x2000 /* interrupt when heartbeat lost */ -#define IMREG_LCDEN 0x1000 /* interrupt when CAM loaded */ -#define IMREG_PINTEN 0x0800 /* interrupt when PINT in TDA set */ -#define IMREG_PRXEN 0x0400 /* interrupt when packet received */ -#define IMREG_PTXEN 0x0200 /* interrupt when packet was sent */ -#define IMREG_TXEREN 0x0100 /* interrupt when send failed */ -#define IMREG_TCEN 0x0080 /* interrupt when timer completed */ -#define IMREG_RDEEN 0x0040 /* interrupt when RDA exhausted */ -#define IMREG_RBEEN 0x0020 /* interrupt when RBA exhausted */ -#define IMREG_RBAEEN 0x0010 /* interrupt when RBA too short */ -#define IMREG_CRCEN 0x0008 /* interrupt when CRC counter rolls */ -#define IMREG_FAEEN 0x0004 /* interrupt when FAE counter rolls */ -#define IMREG_MPEN 0x0002 /* interrupt when MP counter rolls */ -#define IMREG_RFOEN 0x0001 /* interrupt when Rx FIFO overflows */ - -/* Interrupt Status Register */ - -#define SONIC_ISREG 0x0a -#define ISREG_BR 0x4000 /* bus retry occurred */ -#define ISREG_HBL 0x2000 /* heartbeat lost */ -#define ISREG_LCD 0x1000 /* CAM loaded */ -#define ISREG_PINT 0x0800 /* PINT in TDA set */ -#define ISREG_PKTRX 0x0400 /* packet received */ -#define ISREG_TXDN 0x0200 /* packet was sent */ -#define ISREG_TXER 0x0100 /* send failed */ -#define ISREG_TC 0x0080 /* timer completed */ -#define ISREG_RDE 0x0040 /* RDA exhausted */ -#define ISREG_RBE 0x0020 /* RBA exhausted */ -#define ISREG_RBAE 0x0010 /* RBA too short for received frame */ -#define ISREG_CRC 0x0008 /* CRC counter rolls over */ -#define ISREG_FAE 0x0004 /* FAE counter rolls over */ -#define ISREG_MP 0x0002 /* MP counter rolls over */ -#define ISREG_RFO 0x0001 /* Rx FIFO overflows */ - -#define SONIC_UTDA 0x0c /* current transmit descr address */ -#define SONIC_CTDA 0x0e - -#define SONIC_URDA 0x1a /* current receive descr address */ -#define SONIC_CRDA 0x1c - -#define SONIC_CRBA0 0x1e /* current receive buffer address */ -#define SONIC_CRBA1 0x20 - -#define SONIC_RBWC0 0x22 /* word count in receive buffer */ -#define SONIC_RBWC1 0x24 - -#define SONIC_EOBC 0x26 /* minimum space to be free in RBA */ - -#define SONIC_URRA 0x28 /* upper address of CDA & Recv Area */ - -#define SONIC_RSA 0x2a /* start of receive resource area */ - -#define SONIC_REA 0x2c /* end of receive resource area */ - -#define SONIC_RRP 0x2e /* resource read pointer */ - -#define SONIC_RWP 0x30 /* resource write pointer */ - -#define SONIC_CAMEPTR 0x42 /* CAM entry pointer */ - -#define SONIC_CAMADDR2 0x44 /* CAM address ports */ -#define SONIC_CAMADDR1 0x46 -#define SONIC_CAMADDR0 0x48 - -#define SONIC_CAMPTR 0x4c /* lower address of CDA */ - -#define SONIC_CAMCNT 0x4e /* # of CAM descriptors to load */ - -/* Data Configuration Register 2 */ - -#define SONIC_DCREG2 0x7e -#define DCREG2_EXPO3 0x8000 /* extended programmable outputs */ -#define DCREG2_EXPO2 0x4000 -#define DCREG2_EXPO1 0x2000 -#define DCREG2_EXPO0 0x1000 -#define DCREG2_HD 0x0800 /* heartbeat disable */ -#define DCREG2_JD 0x0200 /* jabber timer disable */ -#define DCREG2_AUTO 0x0100 /* enable AUI/TP auto selection */ -#define DCREG2_XWRAP 0x0040 /* TP transceiver loopback */ -#define DCREG2_PH 0x0010 /* HOLD request timing */ -#define DCREG2_PCM 0x0004 /* packet compress when matched */ -#define DCREG2_PCNM 0x0002 /* packet compress when not matched */ -#define DCREG2_RJCM 0x0001 /* inverse packet match via CAM */ - -/* Board Control Register: Enable RAM, Interrupts... */ - -#define BCMREG 0x80 -#define BCMREG_RAMEN 0x80 /* switch over to RAM */ -#define BCMREG_IPEND 0x40 /* interrupt pending ? */ -#define BCMREG_RESET 0x08 /* reset board */ -#define BCMREG_16BIT 0x04 /* adapter in 16-bit slot */ -#define BCMREG_RAMWIN 0x02 /* enable RAM window */ -#define BCMREG_IEN 0x01 /* interrupt enable */ - -/* MAC Address PROM */ - -#define MACADDRPROM 0x92 - -/* structure of a CAM entry */ - -typedef struct { - u32 index; /* pointer into CAM area */ - u32 addr0; /* address part (bits 0..15 used) */ - u32 addr1; - u32 addr2; -} camentry_t; - -/* structure of a receive resource */ - -typedef struct { - u32 startlo; /* start address (bits 0..15 used) */ - u32 starthi; - u32 cntlo; /* size in 16-bit quantities */ - u32 cnthi; -} rra_t; - -/* structure of a receive descriptor */ - -typedef struct { - u32 status; /* packet status */ - u32 length; /* length in bytes */ - u32 startlo; /* start address */ - u32 starthi; - u32 seqno; /* frame sequence */ - u32 link; /* pointer to next descriptor */ - /* bit 0 = EOL */ - u32 inuse; /* !=0 --> free for SONIC to write */ -} rda_t; - -/* structure of a transmit descriptor */ - -typedef struct { - u32 status; /* transmit status */ - u32 config; /* value for TCR */ - u32 length; /* total length */ - u32 fragcount; /* number of fragments */ - u32 startlo; /* start address of fragment */ - u32 starthi; - u32 fraglength; /* length of this fragment */ - /* more address/length triplets may */ - /* follow here */ - u32 link; /* pointer to next descriptor */ - /* bit 0 = EOL */ -} tda_t; - -#endif /* _IBM_LANA_DRIVER_ */ - -#endif /* _IBM_LANA_INCLUDE_ */ diff --git a/drivers/net/ethernet/natsemi/natsemi.c b/drivers/net/ethernet/natsemi/natsemi.c index f4ad60c97ea..7a5e295588b 100644 --- a/drivers/net/ethernet/natsemi/natsemi.c +++ b/drivers/net/ethernet/natsemi/natsemi.c @@ -862,9 +862,6 @@ static int natsemi_probe1(struct pci_dev *pdev, const struct pci_device_id *ent) prev_eedata = eedata; } - /* Store MAC Address in perm_addr */ - memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN); - np = netdev_priv(dev); np->ioaddr = ioaddr; |