diff options
Diffstat (limited to 'drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c')
| -rw-r--r-- | drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c | 2317 |
1 files changed, 2317 insertions, 0 deletions
diff --git a/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c new file mode 100644 index 00000000000..a72688e8dc6 --- /dev/null +++ b/drivers/net/ethernet/samsung/sxgbe/sxgbe_main.c @@ -0,0 +1,2317 @@ +/* 10G controller driver for Samsung SoCs + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Siva Reddy Kallam <siva.kallam@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/clk.h> +#include <linux/crc32.h> +#include <linux/dma-mapping.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/if.h> +#include <linux/if_ether.h> +#include <linux/if_vlan.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/ip.h> +#include <linux/kernel.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/net_tstamp.h> +#include <linux/netdevice.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/prefetch.h> +#include <linux/skbuff.h> +#include <linux/slab.h> +#include <linux/tcp.h> +#include <linux/sxgbe_platform.h> + +#include "sxgbe_common.h" +#include "sxgbe_desc.h" +#include "sxgbe_dma.h" +#include "sxgbe_mtl.h" +#include "sxgbe_reg.h" + +#define SXGBE_ALIGN(x) L1_CACHE_ALIGN(x) +#define JUMBO_LEN 9000 + +/* Module parameters */ +#define TX_TIMEO 5000 +#define DMA_TX_SIZE 512 +#define DMA_RX_SIZE 1024 +#define TC_DEFAULT 64 +#define DMA_BUFFER_SIZE BUF_SIZE_2KiB +/* The default timer value as per the sxgbe specification 1 sec(1000 ms) */ +#define SXGBE_DEFAULT_LPI_TIMER 1000 + +static int debug = -1; +static int eee_timer = SXGBE_DEFAULT_LPI_TIMER; + +module_param(eee_timer, int, S_IRUGO | S_IWUSR); + +module_param(debug, int, S_IRUGO | S_IWUSR); +static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | + NETIF_MSG_LINK | NETIF_MSG_IFUP | + NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); + +static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id); +static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id); +static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id); + +#define SXGBE_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x)) + +#define SXGBE_LPI_TIMER(x) (jiffies + msecs_to_jiffies(x)) + +/** + * sxgbe_verify_args - verify the driver parameters. + * Description: it verifies if some wrong parameter is passed to the driver. + * Note that wrong parameters are replaced with the default values. + */ +static void sxgbe_verify_args(void) +{ + if (unlikely(eee_timer < 0)) + eee_timer = SXGBE_DEFAULT_LPI_TIMER; +} + +static void sxgbe_enable_eee_mode(const struct sxgbe_priv_data *priv) +{ + /* Check and enter in LPI mode */ + if (!priv->tx_path_in_lpi_mode) + priv->hw->mac->set_eee_mode(priv->ioaddr); +} + +void sxgbe_disable_eee_mode(struct sxgbe_priv_data * const priv) +{ + /* Exit and disable EEE in case of we are are in LPI state. */ + priv->hw->mac->reset_eee_mode(priv->ioaddr); + del_timer_sync(&priv->eee_ctrl_timer); + priv->tx_path_in_lpi_mode = false; +} + +/** + * sxgbe_eee_ctrl_timer + * @arg : data hook + * Description: + * If there is no data transfer and if we are not in LPI state, + * then MAC Transmitter can be moved to LPI state. + */ +static void sxgbe_eee_ctrl_timer(unsigned long arg) +{ + struct sxgbe_priv_data *priv = (struct sxgbe_priv_data *)arg; + + sxgbe_enable_eee_mode(priv); + mod_timer(&priv->eee_ctrl_timer, SXGBE_LPI_TIMER(eee_timer)); +} + +/** + * sxgbe_eee_init + * @priv: private device pointer + * Description: + * If the EEE support has been enabled while configuring the driver, + * if the GMAC actually supports the EEE (from the HW cap reg) and the + * phy can also manage EEE, so enable the LPI state and start the timer + * to verify if the tx path can enter in LPI state. + */ +bool sxgbe_eee_init(struct sxgbe_priv_data * const priv) +{ + bool ret = false; + + /* MAC core supports the EEE feature. */ + if (priv->hw_cap.eee) { + /* Check if the PHY supports EEE */ + if (phy_init_eee(priv->phydev, 1)) + return false; + + priv->eee_active = 1; + init_timer(&priv->eee_ctrl_timer); + priv->eee_ctrl_timer.function = sxgbe_eee_ctrl_timer; + priv->eee_ctrl_timer.data = (unsigned long)priv; + priv->eee_ctrl_timer.expires = SXGBE_LPI_TIMER(eee_timer); + add_timer(&priv->eee_ctrl_timer); + + priv->hw->mac->set_eee_timer(priv->ioaddr, + SXGBE_DEFAULT_LPI_TIMER, + priv->tx_lpi_timer); + + pr_info("Energy-Efficient Ethernet initialized\n"); + + ret = true; + } + + return ret; +} + +static void sxgbe_eee_adjust(const struct sxgbe_priv_data *priv) +{ + /* When the EEE has been already initialised we have to + * modify the PLS bit in the LPI ctrl & status reg according + * to the PHY link status. For this reason. + */ + if (priv->eee_enabled) + priv->hw->mac->set_eee_pls(priv->ioaddr, priv->phydev->link); +} + +/** + * sxgbe_clk_csr_set - dynamically set the MDC clock + * @priv: driver private structure + * Description: this is to dynamically set the MDC clock according to the csr + * clock input. + */ +static void sxgbe_clk_csr_set(struct sxgbe_priv_data *priv) +{ + u32 clk_rate = clk_get_rate(priv->sxgbe_clk); + + /* assign the proper divider, this will be used during + * mdio communication + */ + if (clk_rate < SXGBE_CSR_F_150M) + priv->clk_csr = SXGBE_CSR_100_150M; + else if (clk_rate <= SXGBE_CSR_F_250M) + priv->clk_csr = SXGBE_CSR_150_250M; + else if (clk_rate <= SXGBE_CSR_F_300M) + priv->clk_csr = SXGBE_CSR_250_300M; + else if (clk_rate <= SXGBE_CSR_F_350M) + priv->clk_csr = SXGBE_CSR_300_350M; + else if (clk_rate <= SXGBE_CSR_F_400M) + priv->clk_csr = SXGBE_CSR_350_400M; + else if (clk_rate <= SXGBE_CSR_F_500M) + priv->clk_csr = SXGBE_CSR_400_500M; +} + +/* minimum number of free TX descriptors required to wake up TX process */ +#define SXGBE_TX_THRESH(x) (x->dma_tx_size/4) + +static inline u32 sxgbe_tx_avail(struct sxgbe_tx_queue *queue, int tx_qsize) +{ + return queue->dirty_tx + tx_qsize - queue->cur_tx - 1; +} + +/** + * sxgbe_adjust_link + * @dev: net device structure + * Description: it adjusts the link parameters. + */ +static void sxgbe_adjust_link(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phydev; + u8 new_state = 0; + u8 speed = 0xff; + + if (!phydev) + return; + + /* SXGBE is not supporting auto-negotiation and + * half duplex mode. so, not handling duplex change + * in this function. only handling speed and link status + */ + if (phydev->link) { + if (phydev->speed != priv->speed) { + new_state = 1; + switch (phydev->speed) { + case SPEED_10000: + speed = SXGBE_SPEED_10G; + break; + case SPEED_2500: + speed = SXGBE_SPEED_2_5G; + break; + case SPEED_1000: + speed = SXGBE_SPEED_1G; + break; + default: + netif_err(priv, link, dev, + "Speed (%d) not supported\n", + phydev->speed); + } + + priv->speed = phydev->speed; + priv->hw->mac->set_speed(priv->ioaddr, speed); + } + + if (!priv->oldlink) { + new_state = 1; + priv->oldlink = 1; + } + } else if (priv->oldlink) { + new_state = 1; + priv->oldlink = 0; + priv->speed = SPEED_UNKNOWN; + } + + if (new_state & netif_msg_link(priv)) + phy_print_status(phydev); + + /* Alter the MAC settings for EEE */ + sxgbe_eee_adjust(priv); +} + +/** + * sxgbe_init_phy - PHY initialization + * @dev: net device structure + * Description: it initializes the driver's PHY state, and attaches the PHY + * to the mac driver. + * Return value: + * 0 on success + */ +static int sxgbe_init_phy(struct net_device *ndev) +{ + char phy_id_fmt[MII_BUS_ID_SIZE + 3]; + char bus_id[MII_BUS_ID_SIZE]; + struct phy_device *phydev; + struct sxgbe_priv_data *priv = netdev_priv(ndev); + int phy_iface = priv->plat->interface; + + /* assign default link status */ + priv->oldlink = 0; + priv->speed = SPEED_UNKNOWN; + priv->oldduplex = DUPLEX_UNKNOWN; + + if (priv->plat->phy_bus_name) + snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x", + priv->plat->phy_bus_name, priv->plat->bus_id); + else + snprintf(bus_id, MII_BUS_ID_SIZE, "sxgbe-%x", + priv->plat->bus_id); + + snprintf(phy_id_fmt, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, + priv->plat->phy_addr); + netdev_dbg(ndev, "%s: trying to attach to %s\n", __func__, phy_id_fmt); + + phydev = phy_connect(ndev, phy_id_fmt, &sxgbe_adjust_link, phy_iface); + + if (IS_ERR(phydev)) { + netdev_err(ndev, "Could not attach to PHY\n"); + return PTR_ERR(phydev); + } + + /* Stop Advertising 1000BASE Capability if interface is not GMII */ + if ((phy_iface == PHY_INTERFACE_MODE_MII) || + (phy_iface == PHY_INTERFACE_MODE_RMII)) + phydev->advertising &= ~(SUPPORTED_1000baseT_Half | + SUPPORTED_1000baseT_Full); + if (phydev->phy_id == 0) { + phy_disconnect(phydev); + return -ENODEV; + } + + netdev_dbg(ndev, "%s: attached to PHY (UID 0x%x) Link = %d\n", + __func__, phydev->phy_id, phydev->link); + + /* save phy device in private structure */ + priv->phydev = phydev; + + return 0; +} + +/** + * sxgbe_clear_descriptors: clear descriptors + * @priv: driver private structure + * Description: this function is called to clear the tx and rx descriptors + * in case of both basic and extended descriptors are used. + */ +static void sxgbe_clear_descriptors(struct sxgbe_priv_data *priv) +{ + int i, j; + unsigned int txsize = priv->dma_tx_size; + unsigned int rxsize = priv->dma_rx_size; + + /* Clear the Rx/Tx descriptors */ + for (j = 0; j < SXGBE_RX_QUEUES; j++) { + for (i = 0; i < rxsize; i++) + priv->hw->desc->init_rx_desc(&priv->rxq[j]->dma_rx[i], + priv->use_riwt, priv->mode, + (i == rxsize - 1)); + } + + for (j = 0; j < SXGBE_TX_QUEUES; j++) { + for (i = 0; i < txsize; i++) + priv->hw->desc->init_tx_desc(&priv->txq[j]->dma_tx[i]); + } +} + +static int sxgbe_init_rx_buffers(struct net_device *dev, + struct sxgbe_rx_norm_desc *p, int i, + unsigned int dma_buf_sz, + struct sxgbe_rx_queue *rx_ring) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + struct sk_buff *skb; + + skb = __netdev_alloc_skb_ip_align(dev, dma_buf_sz, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + rx_ring->rx_skbuff[i] = skb; + rx_ring->rx_skbuff_dma[i] = dma_map_single(priv->device, skb->data, + dma_buf_sz, DMA_FROM_DEVICE); + + if (dma_mapping_error(priv->device, rx_ring->rx_skbuff_dma[i])) { + netdev_err(dev, "%s: DMA mapping error\n", __func__); + dev_kfree_skb_any(skb); + return -EINVAL; + } + + p->rdes23.rx_rd_des23.buf2_addr = rx_ring->rx_skbuff_dma[i]; + + return 0; +} +/** + * init_tx_ring - init the TX descriptor ring + * @dev: net device structure + * @tx_ring: ring to be intialised + * @tx_rsize: ring size + * Description: this function initializes the DMA TX descriptor + */ +static int init_tx_ring(struct device *dev, u8 queue_no, + struct sxgbe_tx_queue *tx_ring, int tx_rsize) +{ + /* TX ring is not allcoated */ + if (!tx_ring) { + dev_err(dev, "No memory for TX queue of SXGBE\n"); + return -ENOMEM; + } + + /* allocate memory for TX descriptors */ + tx_ring->dma_tx = dma_zalloc_coherent(dev, + tx_rsize * sizeof(struct sxgbe_tx_norm_desc), + &tx_ring->dma_tx_phy, GFP_KERNEL); + if (!tx_ring->dma_tx) + return -ENOMEM; + + /* allocate memory for TX skbuff array */ + tx_ring->tx_skbuff_dma = devm_kcalloc(dev, tx_rsize, + sizeof(dma_addr_t), GFP_KERNEL); + if (!tx_ring->tx_skbuff_dma) + goto dmamem_err; + + tx_ring->tx_skbuff = devm_kcalloc(dev, tx_rsize, + sizeof(struct sk_buff *), GFP_KERNEL); + + if (!tx_ring->tx_skbuff) + goto dmamem_err; + + /* assign queue number */ + tx_ring->queue_no = queue_no; + + /* initalise counters */ + tx_ring->dirty_tx = 0; + tx_ring->cur_tx = 0; + + /* initalise TX queue lock */ + spin_lock_init(&tx_ring->tx_lock); + + return 0; + +dmamem_err: + dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc), + tx_ring->dma_tx, tx_ring->dma_tx_phy); + return -ENOMEM; +} + +/** + * free_rx_ring - free the RX descriptor ring + * @dev: net device structure + * @rx_ring: ring to be intialised + * @rx_rsize: ring size + * Description: this function initializes the DMA RX descriptor + */ +void free_rx_ring(struct device *dev, struct sxgbe_rx_queue *rx_ring, + int rx_rsize) +{ + dma_free_coherent(dev, rx_rsize * sizeof(struct sxgbe_rx_norm_desc), + rx_ring->dma_rx, rx_ring->dma_rx_phy); + kfree(rx_ring->rx_skbuff_dma); + kfree(rx_ring->rx_skbuff); +} + +/** + * init_rx_ring - init the RX descriptor ring + * @dev: net device structure + * @rx_ring: ring to be intialised + * @rx_rsize: ring size + * Description: this function initializes the DMA RX descriptor + */ +static int init_rx_ring(struct net_device *dev, u8 queue_no, + struct sxgbe_rx_queue *rx_ring, int rx_rsize) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + int desc_index; + unsigned int bfsize = 0; + unsigned int ret = 0; + + /* Set the max buffer size according to the MTU. */ + bfsize = ALIGN(dev->mtu + ETH_HLEN + ETH_FCS_LEN + NET_IP_ALIGN, 8); + + netif_dbg(priv, probe, dev, "%s: bfsize %d\n", __func__, bfsize); + + /* RX ring is not allcoated */ + if (rx_ring == NULL) { + netdev_err(dev, "No memory for RX queue\n"); + goto error; + } + + /* assign queue number */ + rx_ring->queue_no = queue_no; + + /* allocate memory for RX descriptors */ + rx_ring->dma_rx = dma_zalloc_coherent(priv->device, + rx_rsize * sizeof(struct sxgbe_rx_norm_desc), + &rx_ring->dma_rx_phy, GFP_KERNEL); + + if (rx_ring->dma_rx == NULL) + goto error; + + /* allocate memory for RX skbuff array */ + rx_ring->rx_skbuff_dma = kmalloc_array(rx_rsize, + sizeof(dma_addr_t), GFP_KERNEL); + if (rx_ring->rx_skbuff_dma == NULL) + goto dmamem_err; + + rx_ring->rx_skbuff = kmalloc_array(rx_rsize, + sizeof(struct sk_buff *), GFP_KERNEL); + if (rx_ring->rx_skbuff == NULL) + goto rxbuff_err; + + /* initialise the buffers */ + for (desc_index = 0; desc_index < rx_rsize; desc_index++) { + struct sxgbe_rx_norm_desc *p; + p = rx_ring->dma_rx + desc_index; + ret = sxgbe_init_rx_buffers(dev, p, desc_index, + bfsize, rx_ring); + if (ret) + goto err_init_rx_buffers; + } + + /* initalise counters */ + rx_ring->cur_rx = 0; + rx_ring->dirty_rx = (unsigned int)(desc_index - rx_rsize); + priv->dma_buf_sz = bfsize; + + return 0; + +err_init_rx_buffers: + while (--desc_index >= 0) + free_rx_ring(priv->device, rx_ring, desc_index); + kfree(rx_ring->rx_skbuff); +rxbuff_err: + kfree(rx_ring->rx_skbuff_dma); +dmamem_err: + dma_free_coherent(priv->device, + rx_rsize * sizeof(struct sxgbe_rx_norm_desc), + rx_ring->dma_rx, rx_ring->dma_rx_phy); +error: + return -ENOMEM; +} +/** + * free_tx_ring - free the TX descriptor ring + * @dev: net device structure + * @tx_ring: ring to be intialised + * @tx_rsize: ring size + * Description: this function initializes the DMA TX descriptor + */ +void free_tx_ring(struct device *dev, struct sxgbe_tx_queue *tx_ring, + int tx_rsize) +{ + dma_free_coherent(dev, tx_rsize * sizeof(struct sxgbe_tx_norm_desc), + tx_ring->dma_tx, tx_ring->dma_tx_phy); +} + +/** + * init_dma_desc_rings - init the RX/TX descriptor rings + * @dev: net device structure + * Description: this function initializes the DMA RX/TX descriptors + * and allocates the socket buffers. It suppors the chained and ring + * modes. + */ +static int init_dma_desc_rings(struct net_device *netd) +{ + int queue_num, ret; + struct sxgbe_priv_data *priv = netdev_priv(netd); + int tx_rsize = priv->dma_tx_size; + int rx_rsize = priv->dma_rx_size; + + /* Allocate memory for queue structures and TX descs */ + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + ret = init_tx_ring(priv->device, queue_num, + priv->txq[queue_num], tx_rsize); + if (ret) { + dev_err(&netd->dev, "TX DMA ring allocation failed!\n"); + goto txalloc_err; + } + + /* save private pointer in each ring this + * pointer is needed during cleaing TX queue + */ + priv->txq[queue_num]->priv_ptr = priv; + } + + /* Allocate memory for queue structures and RX descs */ + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + ret = init_rx_ring(netd, queue_num, + priv->rxq[queue_num], rx_rsize); + if (ret) { + netdev_err(netd, "RX DMA ring allocation failed!!\n"); + goto rxalloc_err; + } + + /* save private pointer in each ring this + * pointer is needed during cleaing TX queue + */ + priv->rxq[queue_num]->priv_ptr = priv; + } + + sxgbe_clear_descriptors(priv); + + return 0; + +txalloc_err: + while (queue_num--) + free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize); + return ret; + +rxalloc_err: + while (queue_num--) + free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize); + return ret; +} + +static void tx_free_ring_skbufs(struct sxgbe_tx_queue *txqueue) +{ + int dma_desc; + struct sxgbe_priv_data *priv = txqueue->priv_ptr; + int tx_rsize = priv->dma_tx_size; + + for (dma_desc = 0; dma_desc < tx_rsize; dma_desc++) { + struct sxgbe_tx_norm_desc *tdesc = txqueue->dma_tx + dma_desc; + + if (txqueue->tx_skbuff_dma[dma_desc]) + dma_unmap_single(priv->device, + txqueue->tx_skbuff_dma[dma_desc], + priv->hw->desc->get_tx_len(tdesc), + DMA_TO_DEVICE); + + dev_kfree_skb_any(txqueue->tx_skbuff[dma_desc]); + txqueue->tx_skbuff[dma_desc] = NULL; + txqueue->tx_skbuff_dma[dma_desc] = 0; + } +} + + +static void dma_free_tx_skbufs(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + struct sxgbe_tx_queue *tqueue = priv->txq[queue_num]; + tx_free_ring_skbufs(tqueue); + } +} + +static void free_dma_desc_resources(struct sxgbe_priv_data *priv) +{ + int queue_num; + int tx_rsize = priv->dma_tx_size; + int rx_rsize = priv->dma_rx_size; + + /* Release the DMA TX buffers */ + dma_free_tx_skbufs(priv); + + /* Release the TX ring memory also */ + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + free_tx_ring(priv->device, priv->txq[queue_num], tx_rsize); + } + + /* Release the RX ring memory also */ + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + free_rx_ring(priv->device, priv->rxq[queue_num], rx_rsize); + } +} + +static int txring_mem_alloc(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + priv->txq[queue_num] = devm_kmalloc(priv->device, + sizeof(struct sxgbe_tx_queue), GFP_KERNEL); + if (!priv->txq[queue_num]) + return -ENOMEM; + } + + return 0; +} + +static int rxring_mem_alloc(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + priv->rxq[queue_num] = devm_kmalloc(priv->device, + sizeof(struct sxgbe_rx_queue), GFP_KERNEL); + if (!priv->rxq[queue_num]) + return -ENOMEM; + } + + return 0; +} + +/** + * sxgbe_mtl_operation_mode - HW MTL operation mode + * @priv: driver private structure + * Description: it sets the MTL operation mode: tx/rx MTL thresholds + * or Store-And-Forward capability. + */ +static void sxgbe_mtl_operation_mode(struct sxgbe_priv_data *priv) +{ + int queue_num; + + /* TX/RX threshold control */ + if (likely(priv->plat->force_sf_dma_mode)) { + /* set TC mode for TX QUEUES */ + SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num) + priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num, + SXGBE_MTL_SFMODE); + priv->tx_tc = SXGBE_MTL_SFMODE; + + /* set TC mode for RX QUEUES */ + SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num) + priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num, + SXGBE_MTL_SFMODE); + priv->rx_tc = SXGBE_MTL_SFMODE; + } else if (unlikely(priv->plat->force_thresh_dma_mode)) { + /* set TC mode for TX QUEUES */ + SXGBE_FOR_EACH_QUEUE(priv->hw_cap.tx_mtl_queues, queue_num) + priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, queue_num, + priv->tx_tc); + /* set TC mode for RX QUEUES */ + SXGBE_FOR_EACH_QUEUE(priv->hw_cap.rx_mtl_queues, queue_num) + priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, queue_num, + priv->rx_tc); + } else { + pr_err("ERROR: %s: Invalid TX threshold mode\n", __func__); + } +} + +/** + * sxgbe_tx_queue_clean: + * @priv: driver private structure + * Description: it reclaims resources after transmission completes. + */ +static void sxgbe_tx_queue_clean(struct sxgbe_tx_queue *tqueue) +{ + struct sxgbe_priv_data *priv = tqueue->priv_ptr; + unsigned int tx_rsize = priv->dma_tx_size; + struct netdev_queue *dev_txq; + u8 queue_no = tqueue->queue_no; + + dev_txq = netdev_get_tx_queue(priv->dev, queue_no); + + spin_lock(&tqueue->tx_lock); + + priv->xstats.tx_clean++; + while (tqueue->dirty_tx != tqueue->cur_tx) { + unsigned int entry = tqueue->dirty_tx % tx_rsize; + struct sk_buff *skb = tqueue->tx_skbuff[entry]; + struct sxgbe_tx_norm_desc *p; + + p = tqueue->dma_tx + entry; + + /* Check if the descriptor is owned by the DMA. */ + if (priv->hw->desc->get_tx_owner(p)) + break; + + if (netif_msg_tx_done(priv)) + pr_debug("%s: curr %d, dirty %d\n", + __func__, tqueue->cur_tx, tqueue->dirty_tx); + + if (likely(tqueue->tx_skbuff_dma[entry])) { + dma_unmap_single(priv->device, + tqueue->tx_skbuff_dma[entry], + priv->hw->desc->get_tx_len(p), + DMA_TO_DEVICE); + tqueue->tx_skbuff_dma[entry] = 0; + } + + if (likely(skb)) { + dev_kfree_skb(skb); + tqueue->tx_skbuff[entry] = NULL; + } + + priv->hw->desc->release_tx_desc(p); + + tqueue->dirty_tx++; + } + + /* wake up queue */ + if (unlikely(netif_tx_queue_stopped(dev_txq) && + sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv))) { + netif_tx_lock(priv->dev); + if (netif_tx_queue_stopped(dev_txq) && + sxgbe_tx_avail(tqueue, tx_rsize) > SXGBE_TX_THRESH(priv)) { + if (netif_msg_tx_done(priv)) + pr_debug("%s: restart transmit\n", __func__); + netif_tx_wake_queue(dev_txq); + } + netif_tx_unlock(priv->dev); + } + + spin_unlock(&tqueue->tx_lock); +} + +/** + * sxgbe_tx_clean: + * @priv: driver private structure + * Description: it reclaims resources after transmission completes. + */ +static void sxgbe_tx_all_clean(struct sxgbe_priv_data * const priv) +{ + u8 queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + struct sxgbe_tx_queue *tqueue = priv->txq[queue_num]; + + sxgbe_tx_queue_clean(tqueue); + } + + if ((priv->eee_enabled) && (!priv->tx_path_in_lpi_mode)) { + sxgbe_enable_eee_mode(priv); + mod_timer(&priv->eee_ctrl_timer, SXGBE_LPI_TIMER(eee_timer)); + } +} + +/** + * sxgbe_restart_tx_queue: irq tx error mng function + * @priv: driver private structure + * Description: it cleans the descriptors and restarts the transmission + * in case of errors. + */ +static void sxgbe_restart_tx_queue(struct sxgbe_priv_data *priv, int queue_num) +{ + struct sxgbe_tx_queue *tx_ring = priv->txq[queue_num]; + struct netdev_queue *dev_txq = netdev_get_tx_queue(priv->dev, + queue_num); + + /* stop the queue */ + netif_tx_stop_queue(dev_txq); + + /* stop the tx dma */ + priv->hw->dma->stop_tx_queue(priv->ioaddr, queue_num); + + /* free the skbuffs of the ring */ + tx_free_ring_skbufs(tx_ring); + + /* initalise counters */ + tx_ring->cur_tx = 0; + tx_ring->dirty_tx = 0; + + /* start the tx dma */ + priv->hw->dma->start_tx_queue(priv->ioaddr, queue_num); + + priv->dev->stats.tx_errors++; + + /* wakeup the queue */ + netif_tx_wake_queue(dev_txq); +} + +/** + * sxgbe_reset_all_tx_queues: irq tx error mng function + * @priv: driver private structure + * Description: it cleans all the descriptors and + * restarts the transmission on all queues in case of errors. + */ +static void sxgbe_reset_all_tx_queues(struct sxgbe_priv_data *priv) +{ + int queue_num; + + /* On TX timeout of net device, resetting of all queues + * may not be proper way, revisit this later if needed + */ + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) + sxgbe_restart_tx_queue(priv, queue_num); +} + +/** + * sxgbe_get_hw_features: get XMAC capabilities from the HW cap. register. + * @priv: driver private structure + * Description: + * new GMAC chip generations have a new register to indicate the + * presence of the optional feature/functions. + * This can be also used to override the value passed through the + * platform and necessary for old MAC10/100 and GMAC chips. + */ +static int sxgbe_get_hw_features(struct sxgbe_priv_data * const priv) +{ + int rval = 0; + struct sxgbe_hw_features *features = &priv->hw_cap; + + /* Read First Capability Register CAP[0] */ + rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 0); + if (rval) { + features->pmt_remote_wake_up = + SXGBE_HW_FEAT_PMT_TEMOTE_WOP(rval); + features->pmt_magic_frame = SXGBE_HW_FEAT_PMT_MAGIC_PKT(rval); + features->atime_stamp = SXGBE_HW_FEAT_IEEE1500_2008(rval); + features->tx_csum_offload = + SXGBE_HW_FEAT_TX_CSUM_OFFLOAD(rval); + features->rx_csum_offload = + SXGBE_HW_FEAT_RX_CSUM_OFFLOAD(rval); + features->multi_macaddr = SXGBE_HW_FEAT_MACADDR_COUNT(rval); + features->tstamp_srcselect = SXGBE_HW_FEAT_TSTMAP_SRC(rval); + features->sa_vlan_insert = SXGBE_HW_FEAT_SRCADDR_VLAN(rval); + features->eee = SXGBE_HW_FEAT_EEE(rval); + } + + /* Read First Capability Register CAP[1] */ + rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 1); + if (rval) { + features->rxfifo_size = SXGBE_HW_FEAT_RX_FIFO_SIZE(rval); + features->txfifo_size = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval); + features->atstmap_hword = SXGBE_HW_FEAT_TX_FIFO_SIZE(rval); + features->dcb_enable = SXGBE_HW_FEAT_DCB(rval); + features->splithead_enable = SXGBE_HW_FEAT_SPLIT_HDR(rval); + features->tcpseg_offload = SXGBE_HW_FEAT_TSO(rval); + features->debug_mem = SXGBE_HW_FEAT_DEBUG_MEM_IFACE(rval); + features->rss_enable = SXGBE_HW_FEAT_RSS(rval); + features->hash_tsize = SXGBE_HW_FEAT_HASH_TABLE_SIZE(rval); + features->l3l4_filer_size = SXGBE_HW_FEAT_L3L4_FILTER_NUM(rval); + } + + /* Read First Capability Register CAP[2] */ + rval = priv->hw->mac->get_hw_feature(priv->ioaddr, 2); + if (rval) { + features->rx_mtl_queues = SXGBE_HW_FEAT_RX_MTL_QUEUES(rval); + features->tx_mtl_queues = SXGBE_HW_FEAT_TX_MTL_QUEUES(rval); + features->rx_dma_channels = SXGBE_HW_FEAT_RX_DMA_CHANNELS(rval); + features->tx_dma_channels = SXGBE_HW_FEAT_TX_DMA_CHANNELS(rval); + features->pps_output_count = SXGBE_HW_FEAT_PPS_OUTPUTS(rval); + features->aux_input_count = SXGBE_HW_FEAT_AUX_SNAPSHOTS(rval); + } + + return rval; +} + +/** + * sxgbe_check_ether_addr: check if the MAC addr is valid + * @priv: driver private structure + * Description: + * it is to verify if the MAC address is valid, in case of failures it + * generates a random MAC address + */ +static void sxgbe_check_ether_addr(struct sxgbe_priv_data *priv) +{ + if (!is_valid_ether_addr(priv->dev->dev_addr)) { + priv->hw->mac->get_umac_addr((void __iomem *) + priv->ioaddr, + priv->dev->dev_addr, 0); + if (!is_valid_ether_addr(priv->dev->dev_addr)) + eth_hw_addr_random(priv->dev); + } + dev_info(priv->device, "device MAC address %pM\n", + priv->dev->dev_addr); +} + +/** + * sxgbe_init_dma_engine: DMA init. + * @priv: driver private structure + * Description: + * It inits the DMA invoking the specific SXGBE callback. + * Some DMA parameters can be passed from the platform; + * in case of these are not passed a default is kept for the MAC or GMAC. + */ +static int sxgbe_init_dma_engine(struct sxgbe_priv_data *priv) +{ + int pbl = DEFAULT_DMA_PBL, fixed_burst = 0, burst_map = 0; + int queue_num; + + if (priv->plat->dma_cfg) { + pbl = priv->plat->dma_cfg->pbl; + fixed_burst = priv->plat->dma_cfg->fixed_burst; + burst_map = priv->plat->dma_cfg->burst_map; + } + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) + priv->hw->dma->cha_init(priv->ioaddr, queue_num, + fixed_burst, pbl, + (priv->txq[queue_num])->dma_tx_phy, + (priv->rxq[queue_num])->dma_rx_phy, + priv->dma_tx_size, priv->dma_rx_size); + + return priv->hw->dma->init(priv->ioaddr, fixed_burst, burst_map); +} + +/** + * sxgbe_init_mtl_engine: MTL init. + * @priv: driver private structure + * Description: + * It inits the MTL invoking the specific SXGBE callback. + */ +static void sxgbe_init_mtl_engine(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + priv->hw->mtl->mtl_set_txfifosize(priv->ioaddr, queue_num, + priv->hw_cap.tx_mtl_qsize); + priv->hw->mtl->mtl_enable_txqueue(priv->ioaddr, queue_num); + } +} + +/** + * sxgbe_disable_mtl_engine: MTL disable. + * @priv: driver private structure + * Description: + * It disables the MTL queues by invoking the specific SXGBE callback. + */ +static void sxgbe_disable_mtl_engine(struct sxgbe_priv_data *priv) +{ + int queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) + priv->hw->mtl->mtl_disable_txqueue(priv->ioaddr, queue_num); +} + + +/** + * sxgbe_tx_timer: mitigation sw timer for tx. + * @data: data pointer + * Description: + * This is the timer handler to directly invoke the sxgbe_tx_clean. + */ +static void sxgbe_tx_timer(unsigned long data) +{ + struct sxgbe_tx_queue *p = (struct sxgbe_tx_queue *)data; + sxgbe_tx_queue_clean(p); +} + +/** + * sxgbe_init_tx_coalesce: init tx mitigation options. + * @priv: driver private structure + * Description: + * This inits the transmit coalesce parameters: i.e. timer rate, + * timer handler and default threshold used for enabling the + * interrupt on completion bit. + */ +static void sxgbe_tx_init_coalesce(struct sxgbe_priv_data *priv) +{ + u8 queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + struct sxgbe_tx_queue *p = priv->txq[queue_num]; + p->tx_coal_frames = SXGBE_TX_FRAMES; + p->tx_coal_timer = SXGBE_COAL_TX_TIMER; + init_timer(&p->txtimer); + p->txtimer.expires = SXGBE_COAL_TIMER(p->tx_coal_timer); + p->txtimer.data = (unsigned long)&priv->txq[queue_num]; + p->txtimer.function = sxgbe_tx_timer; + add_timer(&p->txtimer); + } +} + +static void sxgbe_tx_del_timer(struct sxgbe_priv_data *priv) +{ + u8 queue_num; + + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + struct sxgbe_tx_queue *p = priv->txq[queue_num]; + del_timer_sync(&p->txtimer); + } +} + +/** + * sxgbe_open - open entry point of the driver + * @dev : pointer to the device structure. + * Description: + * This function is the open entry point of the driver. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int sxgbe_open(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + int ret, queue_num; + + clk_prepare_enable(priv->sxgbe_clk); + + sxgbe_check_ether_addr(priv); + + /* Init the phy */ + ret = sxgbe_init_phy(dev); + if (ret) { + netdev_err(dev, "%s: Cannot attach to PHY (error: %d)\n", + __func__, ret); + goto phy_error; + } + + /* Create and initialize the TX/RX descriptors chains. */ + priv->dma_tx_size = SXGBE_ALIGN(DMA_TX_SIZE); + priv->dma_rx_size = SXGBE_ALIGN(DMA_RX_SIZE); + priv->dma_buf_sz = SXGBE_ALIGN(DMA_BUFFER_SIZE); + priv->tx_tc = TC_DEFAULT; + priv->rx_tc = TC_DEFAULT; + init_dma_desc_rings(dev); + + /* DMA initialization and SW reset */ + ret = sxgbe_init_dma_engine(priv); + if (ret < 0) { + netdev_err(dev, "%s: DMA initialization failed\n", __func__); + goto init_error; + } + + /* MTL initialization */ + sxgbe_init_mtl_engine(priv); + + /* Copy the MAC addr into the HW */ + priv->hw->mac->set_umac_addr(priv->ioaddr, dev->dev_addr, 0); + + /* Initialize the MAC Core */ + priv->hw->mac->core_init(priv->ioaddr); + + /* Request the IRQ lines */ + ret = devm_request_irq(priv->device, priv->irq, sxgbe_common_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + netdev_err(dev, "%s: ERROR: allocating the IRQ %d (error: %d)\n", + __func__, priv->irq, ret); + goto init_error; + } + + /* If the LPI irq is different from the mac irq + * register a dedicated handler + */ + if (priv->lpi_irq != dev->irq) { + ret = devm_request_irq(priv->device, priv->lpi_irq, + sxgbe_common_interrupt, + IRQF_SHARED, dev->name, dev); + if (unlikely(ret < 0)) { + netdev_err(dev, "%s: ERROR: allocating the LPI IRQ %d (%d)\n", + __func__, priv->lpi_irq, ret); + goto init_error; + } + } + + /* Request TX DMA irq lines */ + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + ret = devm_request_irq(priv->device, + (priv->txq[queue_num])->irq_no, + sxgbe_tx_interrupt, 0, + dev->name, priv->txq[queue_num]); + if (unlikely(ret < 0)) { + netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n", + __func__, priv->irq, ret); + goto init_error; + } + } + + /* Request RX DMA irq lines */ + SXGBE_FOR_EACH_QUEUE(SXGBE_RX_QUEUES, queue_num) { + ret = devm_request_irq(priv->device, + (priv->rxq[queue_num])->irq_no, + sxgbe_rx_interrupt, 0, + dev->name, priv->rxq[queue_num]); + if (unlikely(ret < 0)) { + netdev_err(dev, "%s: ERROR: allocating TX IRQ %d (error: %d)\n", + __func__, priv->irq, ret); + goto init_error; + } + } + + /* Enable the MAC Rx/Tx */ + priv->hw->mac->enable_tx(priv->ioaddr, true); + priv->hw->mac->enable_rx(priv->ioaddr, true); + + /* Set the HW DMA mode and the COE */ + sxgbe_mtl_operation_mode(priv); + + /* Extra statistics */ + memset(&priv->xstats, 0, sizeof(struct sxgbe_extra_stats)); + + priv->xstats.tx_threshold = priv->tx_tc; + priv->xstats.rx_threshold = priv->rx_tc; + + /* Start the ball rolling... */ + netdev_dbg(dev, "DMA RX/TX processes started...\n"); + priv->hw->dma->start_tx(priv->ioaddr, SXGBE_TX_QUEUES); + priv->hw->dma->start_rx(priv->ioaddr, SXGBE_RX_QUEUES); + + if (priv->phydev) + phy_start(priv->phydev); + + /* initalise TX coalesce parameters */ + sxgbe_tx_init_coalesce(priv); + + if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) { + priv->rx_riwt = SXGBE_MAX_DMA_RIWT; + priv->hw->dma->rx_watchdog(priv->ioaddr, SXGBE_MAX_DMA_RIWT); + } + + priv->tx_lpi_timer = SXGBE_DEFAULT_LPI_TIMER; + priv->eee_enabled = sxgbe_eee_init(priv); + + napi_enable(&priv->napi); + netif_start_queue(dev); + + return 0; + +init_error: + free_dma_desc_resources(priv); + if (priv->phydev) + phy_disconnect(priv->phydev); +phy_error: + clk_disable_unprepare(priv->sxgbe_clk); + + return ret; +} + +/** + * sxgbe_release - close entry point of the driver + * @dev : device pointer. + * Description: + * This is the stop entry point of the driver. + */ +static int sxgbe_release(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + if (priv->eee_enabled) + del_timer_sync(&priv->eee_ctrl_timer); + + /* Stop and disconnect the PHY */ + if (priv->phydev) { + phy_stop(priv->phydev); + phy_disconnect(priv->phydev); + priv->phydev = NULL; + } + + netif_tx_stop_all_queues(dev); + + napi_disable(&priv->napi); + + /* delete TX timers */ + sxgbe_tx_del_timer(priv); + + /* Stop TX/RX DMA and clear the descriptors */ + priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES); + priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES); + + /* disable MTL queue */ + sxgbe_disable_mtl_engine(priv); + + /* Release and free the Rx/Tx resources */ + free_dma_desc_resources(priv); + + /* Disable the MAC Rx/Tx */ + priv->hw->mac->enable_tx(priv->ioaddr, false); + priv->hw->mac->enable_rx(priv->ioaddr, false); + + clk_disable_unprepare(priv->sxgbe_clk); + + return 0; +} + +/* Prepare first Tx descriptor for doing TSO operation */ +void sxgbe_tso_prepare(struct sxgbe_priv_data *priv, + struct sxgbe_tx_norm_desc *first_desc, + struct sk_buff *skb) +{ + unsigned int total_hdr_len, tcp_hdr_len; + + /* Write first Tx descriptor with appropriate value */ + tcp_hdr_len = tcp_hdrlen(skb); + total_hdr_len = skb_transport_offset(skb) + tcp_hdr_len; + + first_desc->tdes01 = dma_map_single(priv->device, skb->data, + total_hdr_len, DMA_TO_DEVICE); + if (dma_mapping_error(priv->device, first_desc->tdes01)) + pr_err("%s: TX dma mapping failed!!\n", __func__); + + first_desc->tdes23.tx_rd_des23.first_desc = 1; + priv->hw->desc->tx_desc_enable_tse(first_desc, 1, total_hdr_len, + tcp_hdr_len, + skb->len - total_hdr_len); +} + +/** + * sxgbe_xmit: Tx entry point of the driver + * @skb : the socket buffer + * @dev : device pointer + * Description : this is the tx entry point of the driver. + * It programs the chain or the ring and supports oversized frames + * and SG feature. + */ +static netdev_tx_t sxgbe_xmit(struct sk_buff *skb, struct net_device *dev) +{ + unsigned int entry, frag_num; + int cksum_flag = 0; + struct netdev_queue *dev_txq; + unsigned txq_index = skb_get_queue_mapping(skb); + struct sxgbe_priv_data *priv = netdev_priv(dev); + unsigned int tx_rsize = priv->dma_tx_size; + struct sxgbe_tx_queue *tqueue = priv->txq[txq_index]; + struct sxgbe_tx_norm_desc *tx_desc, *first_desc; + struct sxgbe_tx_ctxt_desc *ctxt_desc = NULL; + int nr_frags = skb_shinfo(skb)->nr_frags; + int no_pagedlen = skb_headlen(skb); + int is_jumbo = 0; + u16 cur_mss = skb_shinfo(skb)->gso_size; + u32 ctxt_desc_req = 0; + + /* get the TX queue handle */ + dev_txq = netdev_get_tx_queue(dev, txq_index); + + if (unlikely(skb_is_gso(skb) && tqueue->prev_mss != cur_mss)) + ctxt_desc_req = 1; + + if (unlikely(vlan_tx_tag_present(skb) || + ((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + tqueue->hwts_tx_en))) + ctxt_desc_req = 1; + + /* get the spinlock */ + spin_lock(&tqueue->tx_lock); + + if (priv->tx_path_in_lpi_mode) + sxgbe_disable_eee_mode(priv); + + if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) < nr_frags + 1)) { + if (!netif_tx_queue_stopped(dev_txq)) { + netif_tx_stop_queue(dev_txq); + netdev_err(dev, "%s: Tx Ring is full when %d queue is awake\n", + __func__, txq_index); + } + /* release the spin lock in case of BUSY */ + spin_unlock(&tqueue->tx_lock); + return NETDEV_TX_BUSY; + } + + entry = tqueue->cur_tx % tx_rsize; + tx_desc = tqueue->dma_tx + entry; + + first_desc = tx_desc; + if (ctxt_desc_req) + ctxt_desc = (struct sxgbe_tx_ctxt_desc *)first_desc; + + /* save the skb address */ + tqueue->tx_skbuff[entry] = skb; + + if (!is_jumbo) { + if (likely(skb_is_gso(skb))) { + /* TSO support */ + if (unlikely(tqueue->prev_mss != cur_mss)) { + priv->hw->desc->tx_ctxt_desc_set_mss( + ctxt_desc, cur_mss); + priv->hw->desc->tx_ctxt_desc_set_tcmssv( + ctxt_desc); + priv->hw->desc->tx_ctxt_desc_reset_ostc( + ctxt_desc); + priv->hw->desc->tx_ctxt_desc_set_ctxt( + ctxt_desc); + priv->hw->desc->tx_ctxt_desc_set_owner( + ctxt_desc); + + entry = (++tqueue->cur_tx) % tx_rsize; + first_desc = tqueue->dma_tx + entry; + + tqueue->prev_mss = cur_mss; + } + sxgbe_tso_prepare(priv, first_desc, skb); + } else { + tx_desc->tdes01 = dma_map_single(priv->device, + skb->data, no_pagedlen, DMA_TO_DEVICE); + if (dma_mapping_error(priv->device, tx_desc->tdes01)) + netdev_err(dev, "%s: TX dma mapping failed!!\n", + __func__); + + priv->hw->desc->prepare_tx_desc(tx_desc, 1, no_pagedlen, + no_pagedlen, cksum_flag); + } + } + + for (frag_num = 0; frag_num < nr_frags; frag_num++) { + const skb_frag_t *frag = &skb_shinfo(skb)->frags[frag_num]; + int len = skb_frag_size(frag); + + entry = (++tqueue->cur_tx) % tx_rsize; + tx_desc = tqueue->dma_tx + entry; + tx_desc->tdes01 = skb_frag_dma_map(priv->device, frag, 0, len, + DMA_TO_DEVICE); + + tqueue->tx_skbuff_dma[entry] = tx_desc->tdes01; + tqueue->tx_skbuff[entry] = NULL; + + /* prepare the descriptor */ + priv->hw->desc->prepare_tx_desc(tx_desc, 0, len, + len, cksum_flag); + /* memory barrier to flush descriptor */ + wmb(); + + /* set the owner */ + priv->hw->desc->set_tx_owner(tx_desc); + } + + /* close the descriptors */ + priv->hw->desc->close_tx_desc(tx_desc); + + /* memory barrier to flush descriptor */ + wmb(); + + tqueue->tx_count_frames += nr_frags + 1; + if (tqueue->tx_count_frames > tqueue->tx_coal_frames) { + priv->hw->desc->clear_tx_ic(tx_desc); + priv->xstats.tx_reset_ic_bit++; + mod_timer(&tqueue->txtimer, + SXGBE_COAL_TIMER(tqueue->tx_coal_timer)); + } else { + tqueue->tx_count_frames = 0; + } + + /* set owner for first desc */ + priv->hw->desc->set_tx_owner(first_desc); + + /* memory barrier to flush descriptor */ + wmb(); + + tqueue->cur_tx++; + + /* display current ring */ + netif_dbg(priv, pktdata, dev, "%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d\n", + __func__, tqueue->cur_tx % tx_rsize, + tqueue->dirty_tx % tx_rsize, entry, + first_desc, nr_frags); + + if (unlikely(sxgbe_tx_avail(tqueue, tx_rsize) <= (MAX_SKB_FRAGS + 1))) { + netif_dbg(priv, hw, dev, "%s: stop transmitted packets\n", + __func__); + netif_tx_stop_queue(dev_txq); + } + + dev->stats.tx_bytes += skb->len; + + if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && + tqueue->hwts_tx_en)) { + /* declare that device is doing timestamping */ + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + priv->hw->desc->tx_enable_tstamp(first_desc); + } + + if (!tqueue->hwts_tx_en) + skb_tx_timestamp(skb); + + priv->hw->dma->enable_dma_transmission(priv->ioaddr, txq_index); + + spin_unlock(&tqueue->tx_lock); + + return NETDEV_TX_OK; +} + +/** + * sxgbe_rx_refill: refill used skb preallocated buffers + * @priv: driver private structure + * Description : this is to reallocate the skb for the reception process + * that is based on zero-copy. + */ +static void sxgbe_rx_refill(struct sxgbe_priv_data *priv) +{ + unsigned int rxsize = priv->dma_rx_size; + int bfsize = priv->dma_buf_sz; + u8 qnum = priv->cur_rx_qnum; + + for (; priv->rxq[qnum]->cur_rx - priv->rxq[qnum]->dirty_rx > 0; + priv->rxq[qnum]->dirty_rx++) { + unsigned int entry = priv->rxq[qnum]->dirty_rx % rxsize; + struct sxgbe_rx_norm_desc *p; + + p = priv->rxq[qnum]->dma_rx + entry; + + if (likely(priv->rxq[qnum]->rx_skbuff[entry] == NULL)) { + struct sk_buff *skb; + + skb = netdev_alloc_skb_ip_align(priv->dev, bfsize); + + if (unlikely(skb == NULL)) + break; + + priv->rxq[qnum]->rx_skbuff[entry] = skb; + priv->rxq[qnum]->rx_skbuff_dma[entry] = + dma_map_single(priv->device, skb->data, bfsize, + DMA_FROM_DEVICE); + + p->rdes23.rx_rd_des23.buf2_addr = + priv->rxq[qnum]->rx_skbuff_dma[entry]; + } + + /* Added memory barrier for RX descriptor modification */ + wmb(); + priv->hw->desc->set_rx_owner(p); + /* Added memory barrier for RX descriptor modification */ + wmb(); + } +} + +/** + * sxgbe_rx: receive the frames from the remote host + * @priv: driver private structure + * @limit: napi bugget. + * Description : this the function called by the napi poll method. + * It gets all the frames inside the ring. + */ +static int sxgbe_rx(struct sxgbe_priv_data *priv, int limit) +{ + u8 qnum = priv->cur_rx_qnum; + unsigned int rxsize = priv->dma_rx_size; + unsigned int entry = priv->rxq[qnum]->cur_rx; + unsigned int next_entry = 0; + unsigned int count = 0; + int checksum; + int status; + + while (count < limit) { + struct sxgbe_rx_norm_desc *p; + struct sk_buff *skb; + int frame_len; + + p = priv->rxq[qnum]->dma_rx + entry; + + if (priv->hw->desc->get_rx_owner(p)) + break; + + count++; + + next_entry = (++priv->rxq[qnum]->cur_rx) % rxsize; + prefetch(priv->rxq[qnum]->dma_rx + next_entry); + + /* Read the status of the incoming frame and also get checksum + * value based on whether it is enabled in SXGBE hardware or + * not. + */ + status = priv->hw->desc->rx_wbstatus(p, &priv->xstats, + &checksum); + if (unlikely(status < 0)) { + entry = next_entry; + continue; + } + if (unlikely(!priv->rxcsum_insertion)) + checksum = CHECKSUM_NONE; + + skb = priv->rxq[qnum]->rx_skbuff[entry]; + + if (unlikely(!skb)) + netdev_err(priv->dev, "rx descriptor is not consistent\n"); + + prefetch(skb->data - NET_IP_ALIGN); + priv->rxq[qnum]->rx_skbuff[entry] = NULL; + + frame_len = priv->hw->desc->get_rx_frame_len(p); + + skb_put(skb, frame_len); + + skb->ip_summed = checksum; + if (checksum == CHECKSUM_NONE) + netif_receive_skb(skb); + else + napi_gro_receive(&priv->napi, skb); + + entry = next_entry; + } + + sxgbe_rx_refill(priv); + + return count; +} + +/** + * sxgbe_poll - sxgbe poll method (NAPI) + * @napi : pointer to the napi structure. + * @budget : maximum number of packets that the current CPU can receive from + * all interfaces. + * Description : + * To look at the incoming frames and clear the tx resources. + */ +static int sxgbe_poll(struct napi_struct *napi, int budget) +{ + struct sxgbe_priv_data *priv = container_of(napi, + struct sxgbe_priv_data, napi); + int work_done = 0; + u8 qnum = priv->cur_rx_qnum; + + priv->xstats.napi_poll++; + /* first, clean the tx queues */ + sxgbe_tx_all_clean(priv); + + work_done = sxgbe_rx(priv, budget); + if (work_done < budget) { + napi_complete(napi); + priv->hw->dma->enable_dma_irq(priv->ioaddr, qnum); + } + + return work_done; +} + +/** + * sxgbe_tx_timeout + * @dev : Pointer to net device structure + * Description: this function is called when a packet transmission fails to + * complete within a reasonable time. The driver will mark the error in the + * netdev structure and arrange for the device to be reset to a sane state + * in order to transmit a new packet. + */ +static void sxgbe_tx_timeout(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + sxgbe_reset_all_tx_queues(priv); +} + +/** + * sxgbe_common_interrupt - main ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the main driver interrupt service routine. + * It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI + * interrupts. + */ +static irqreturn_t sxgbe_common_interrupt(int irq, void *dev_id) +{ + struct net_device *netdev = (struct net_device *)dev_id; + struct sxgbe_priv_data *priv = netdev_priv(netdev); + int status; + + status = priv->hw->mac->host_irq_status(priv->ioaddr, &priv->xstats); + /* For LPI we need to save the tx status */ + if (status & TX_ENTRY_LPI_MODE) { + priv->xstats.tx_lpi_entry_n++; + priv->tx_path_in_lpi_mode = true; + } + if (status & TX_EXIT_LPI_MODE) { + priv->xstats.tx_lpi_exit_n++; + priv->tx_path_in_lpi_mode = false; + } + if (status & RX_ENTRY_LPI_MODE) + priv->xstats.rx_lpi_entry_n++; + if (status & RX_EXIT_LPI_MODE) + priv->xstats.rx_lpi_exit_n++; + + return IRQ_HANDLED; +} + +/** + * sxgbe_tx_interrupt - TX DMA ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the tx dma interrupt service routine. + */ +static irqreturn_t sxgbe_tx_interrupt(int irq, void *dev_id) +{ + int status; + struct sxgbe_tx_queue *txq = (struct sxgbe_tx_queue *)dev_id; + struct sxgbe_priv_data *priv = txq->priv_ptr; + + /* get the channel status */ + status = priv->hw->dma->tx_dma_int_status(priv->ioaddr, txq->queue_no, + &priv->xstats); + /* check for normal path */ + if (likely((status & handle_tx))) + napi_schedule(&priv->napi); + + /* check for unrecoverable error */ + if (unlikely((status & tx_hard_error))) + sxgbe_restart_tx_queue(priv, txq->queue_no); + + /* check for TC configuration change */ + if (unlikely((status & tx_bump_tc) && + (priv->tx_tc != SXGBE_MTL_SFMODE) && + (priv->tx_tc < 512))) { + /* step of TX TC is 32 till 128, otherwise 64 */ + priv->tx_tc += (priv->tx_tc < 128) ? 32 : 64; + priv->hw->mtl->set_tx_mtl_mode(priv->ioaddr, + txq->queue_no, priv->tx_tc); + priv->xstats.tx_threshold = priv->tx_tc; + } + + return IRQ_HANDLED; +} + +/** + * sxgbe_rx_interrupt - RX DMA ISR + * @irq: interrupt number. + * @dev_id: to pass the net device pointer. + * Description: this is the rx dma interrupt service routine. + */ +static irqreturn_t sxgbe_rx_interrupt(int irq, void *dev_id) +{ + int status; + struct sxgbe_rx_queue *rxq = (struct sxgbe_rx_queue *)dev_id; + struct sxgbe_priv_data *priv = rxq->priv_ptr; + + /* get the channel status */ + status = priv->hw->dma->rx_dma_int_status(priv->ioaddr, rxq->queue_no, + &priv->xstats); + + if (likely((status & handle_rx) && (napi_schedule_prep(&priv->napi)))) { + priv->hw->dma->disable_dma_irq(priv->ioaddr, rxq->queue_no); + __napi_schedule(&priv->napi); + } + + /* check for TC configuration change */ + if (unlikely((status & rx_bump_tc) && + (priv->rx_tc != SXGBE_MTL_SFMODE) && + (priv->rx_tc < 128))) { + /* step of TC is 32 */ + priv->rx_tc += 32; + priv->hw->mtl->set_rx_mtl_mode(priv->ioaddr, + rxq->queue_no, priv->rx_tc); + priv->xstats.rx_threshold = priv->rx_tc; + } + + return IRQ_HANDLED; +} + +static inline u64 sxgbe_get_stat64(void __iomem *ioaddr, int reg_lo, int reg_hi) +{ + u64 val = readl(ioaddr + reg_lo); + + val |= ((u64)readl(ioaddr + reg_hi)) << 32; + + return val; +} + + +/* sxgbe_get_stats64 - entry point to see statistical information of device + * @dev : device pointer. + * @stats : pointer to hold all the statistical information of device. + * Description: + * This function is a driver entry point whenever ifconfig command gets + * executed to see device statistics. Statistics are number of + * bytes sent or received, errors occured etc. + * Return value: + * This function returns various statistical information of device. + */ +static struct rtnl_link_stats64 *sxgbe_get_stats64(struct net_device *dev, + struct rtnl_link_stats64 *stats) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + void __iomem *ioaddr = priv->ioaddr; + u64 count; + + spin_lock(&priv->stats_lock); + /* Freeze the counter registers before reading value otherwise it may + * get updated by hardware while we are reading them + */ + writel(SXGBE_MMC_CTRL_CNT_FRZ, ioaddr + SXGBE_MMC_CTL_REG); + + stats->rx_bytes = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXOCTETLO_GCNT_REG, + SXGBE_MMC_RXOCTETHI_GCNT_REG); + + stats->rx_packets = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXFRAMELO_GBCNT_REG, + SXGBE_MMC_RXFRAMEHI_GBCNT_REG); + + stats->multicast = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXMULTILO_GCNT_REG, + SXGBE_MMC_RXMULTIHI_GCNT_REG); + + stats->rx_crc_errors = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXCRCERRLO_REG, + SXGBE_MMC_RXCRCERRHI_REG); + + stats->rx_length_errors = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXLENERRLO_REG, + SXGBE_MMC_RXLENERRHI_REG); + + stats->rx_missed_errors = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_RXFIFOOVERFLOWLO_GBCNT_REG, + SXGBE_MMC_RXFIFOOVERFLOWHI_GBCNT_REG); + + stats->tx_bytes = sxgbe_get_stat64(ioaddr, + SXGBE_MMC_TXOCTETLO_GCNT_REG, + SXGBE_MMC_TXOCTETHI_GCNT_REG); + + count = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GBCNT_REG, + SXGBE_MMC_TXFRAMEHI_GBCNT_REG); + + stats->tx_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXFRAMELO_GCNT_REG, + SXGBE_MMC_TXFRAMEHI_GCNT_REG); + stats->tx_errors = count - stats->tx_errors; + stats->tx_packets = count; + stats->tx_fifo_errors = sxgbe_get_stat64(ioaddr, SXGBE_MMC_TXUFLWLO_GBCNT_REG, + SXGBE_MMC_TXUFLWHI_GBCNT_REG); + writel(0, ioaddr + SXGBE_MMC_CTL_REG); + spin_unlock(&priv->stats_lock); + + return stats; +} + +/* sxgbe_set_features - entry point to set offload features of the device. + * @dev : device pointer. + * @features : features which are required to be set. + * Description: + * This function is a driver entry point and called by Linux kernel whenever + * any device features are set or reset by user. + * Return value: + * This function returns 0 after setting or resetting device features. + */ +static int sxgbe_set_features(struct net_device *dev, + netdev_features_t features) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + netdev_features_t changed = dev->features ^ features; + + if (changed & NETIF_F_RXCSUM) { + if (features & NETIF_F_RXCSUM) { + priv->hw->mac->enable_rx_csum(priv->ioaddr); + priv->rxcsum_insertion = true; + } else { + priv->hw->mac->disable_rx_csum(priv->ioaddr); + priv->rxcsum_insertion = false; + } + } + + return 0; +} + +/* sxgbe_change_mtu - entry point to change MTU size for the device. + * @dev : device pointer. + * @new_mtu : the new MTU size for the device. + * Description: the Maximum Transfer Unit (MTU) is used by the network layer + * to drive packet transmission. Ethernet has an MTU of 1500 octets + * (ETH_DATA_LEN). This value can be changed with ifconfig. + * Return value: + * 0 on success and an appropriate (-)ve integer as defined in errno.h + * file on failure. + */ +static int sxgbe_change_mtu(struct net_device *dev, int new_mtu) +{ + /* RFC 791, page 25, "Every internet module must be able to forward + * a datagram of 68 octets without further fragmentation." + */ + if (new_mtu < MIN_MTU || (new_mtu > MAX_MTU)) { + netdev_err(dev, "invalid MTU, MTU should be in between %d and %d\n", + MIN_MTU, MAX_MTU); + return -EINVAL; + } + + /* Return if the buffer sizes will not change */ + if (dev->mtu == new_mtu) + return 0; + + dev->mtu = new_mtu; + + if (!netif_running(dev)) + return 0; + + /* Recevice ring buffer size is needed to be set based on MTU. If MTU is + * changed then reinitilisation of the receive ring buffers need to be + * done. Hence bring interface down and bring interface back up + */ + sxgbe_release(dev); + return sxgbe_open(dev); +} + +static void sxgbe_set_umac_addr(void __iomem *ioaddr, unsigned char *addr, + unsigned int reg_n) +{ + unsigned long data; + + data = (addr[5] << 8) | addr[4]; + /* For MAC Addr registers se have to set the Address Enable (AE) + * bit that has no effect on the High Reg 0 where the bit 31 (MO) + * is RO. + */ + writel(data | SXGBE_HI_REG_AE, ioaddr + SXGBE_ADDR_HIGH(reg_n)); + data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; + writel(data, ioaddr + SXGBE_ADDR_LOW(reg_n)); +} + +/** + * sxgbe_set_rx_mode - entry point for setting different receive mode of + * a device. unicast, multicast addressing + * @dev : pointer to the device structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever different receive mode like unicast, multicast and promiscuous + * must be enabled/disabled. + * Return value: + * void. + */ +static void sxgbe_set_rx_mode(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + void __iomem *ioaddr = (void __iomem *)priv->ioaddr; + unsigned int value = 0; + u32 mc_filter[2]; + struct netdev_hw_addr *ha; + int reg = 1; + + netdev_dbg(dev, "%s: # mcasts %d, # unicast %d\n", + __func__, netdev_mc_count(dev), netdev_uc_count(dev)); + + if (dev->flags & IFF_PROMISC) { + value = SXGBE_FRAME_FILTER_PR; + + } else if ((netdev_mc_count(dev) > SXGBE_HASH_TABLE_SIZE) || + (dev->flags & IFF_ALLMULTI)) { + value = SXGBE_FRAME_FILTER_PM; /* pass all multi */ + writel(0xffffffff, ioaddr + SXGBE_HASH_HIGH); + writel(0xffffffff, ioaddr + SXGBE_HASH_LOW); + + } else if (!netdev_mc_empty(dev)) { + /* Hash filter for multicast */ + value = SXGBE_FRAME_FILTER_HMC; + + memset(mc_filter, 0, sizeof(mc_filter)); + netdev_for_each_mc_addr(ha, dev) { + /* The upper 6 bits of the calculated CRC are used to + * index the contens of the hash table + */ + int bit_nr = bitrev32(~crc32_le(~0, ha->addr, 6)) >> 26; + + /* The most significant bit determines the register to + * use (H/L) while the other 5 bits determine the bit + * within the register. + */ + mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31); + } + writel(mc_filter[0], ioaddr + SXGBE_HASH_LOW); + writel(mc_filter[1], ioaddr + SXGBE_HASH_HIGH); + } + + /* Handle multiple unicast addresses (perfect filtering) */ + if (netdev_uc_count(dev) > SXGBE_MAX_PERFECT_ADDRESSES) + /* Switch to promiscuous mode if more than 16 addrs + * are required + */ + value |= SXGBE_FRAME_FILTER_PR; + else { + netdev_for_each_uc_addr(ha, dev) { + sxgbe_set_umac_addr(ioaddr, ha->addr, reg); + reg++; + } + } +#ifdef FRAME_FILTER_DEBUG + /* Enable Receive all mode (to debug filtering_fail errors) */ + value |= SXGBE_FRAME_FILTER_RA; +#endif + writel(value, ioaddr + SXGBE_FRAME_FILTER); + + netdev_dbg(dev, "Filter: 0x%08x\n\tHash: HI 0x%08x, LO 0x%08x\n", + readl(ioaddr + SXGBE_FRAME_FILTER), + readl(ioaddr + SXGBE_HASH_HIGH), + readl(ioaddr + SXGBE_HASH_LOW)); +} + +/** + * sxgbe_config - entry point for changing configuration mode passed on by + * ifconfig + * @dev : pointer to the device structure + * @map : pointer to the device mapping structure + * Description: + * This function is a driver entry point which gets called by the kernel + * whenever some device configuration is changed. + * Return value: + * This function returns 0 if success and appropriate error otherwise. + */ +static int sxgbe_config(struct net_device *dev, struct ifmap *map) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + /* Can't act on a running interface */ + if (dev->flags & IFF_UP) + return -EBUSY; + + /* Don't allow changing the I/O address */ + if (map->base_addr != (unsigned long)priv->ioaddr) { + netdev_warn(dev, "can't change I/O address\n"); + return -EOPNOTSUPP; + } + + /* Don't allow changing the IRQ */ + if (map->irq != priv->irq) { + netdev_warn(dev, "not change IRQ number %d\n", priv->irq); + return -EOPNOTSUPP; + } + + return 0; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * sxgbe_poll_controller - entry point for polling receive by device + * @dev : pointer to the device structure + * Description: + * This function is used by NETCONSOLE and other diagnostic tools + * to allow network I/O with interrupts disabled. + * Return value: + * Void. + */ +static void sxgbe_poll_controller(struct net_device *dev) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + + disable_irq(priv->irq); + sxgbe_rx_interrupt(priv->irq, dev); + enable_irq(priv->irq); +} +#endif + +/* sxgbe_ioctl - Entry point for the Ioctl + * @dev: Device pointer. + * @rq: An IOCTL specefic structure, that can contain a pointer to + * a proprietary structure used to pass information to the driver. + * @cmd: IOCTL command + * Description: + * Currently it supports the phy_mii_ioctl(...) and HW time stamping. + */ +static int sxgbe_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct sxgbe_priv_data *priv = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + if (!netif_running(dev)) + return -EINVAL; + + switch (cmd) { + case SIOCGMIIPHY: + case SIOCGMIIREG: + case SIOCSMIIREG: + if (!priv->phydev) + return -EINVAL; + ret = phy_mii_ioctl(priv->phydev, rq, cmd); + break; + default: + break; + } + + return ret; +} + +static const struct net_device_ops sxgbe_netdev_ops = { + .ndo_open = sxgbe_open, + .ndo_start_xmit = sxgbe_xmit, + .ndo_stop = sxgbe_release, + .ndo_get_stats64 = sxgbe_get_stats64, + .ndo_change_mtu = sxgbe_change_mtu, + .ndo_set_features = sxgbe_set_features, + .ndo_set_rx_mode = sxgbe_set_rx_mode, + .ndo_tx_timeout = sxgbe_tx_timeout, + .ndo_do_ioctl = sxgbe_ioctl, + .ndo_set_config = sxgbe_config, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = sxgbe_poll_controller, +#endif + .ndo_set_mac_address = eth_mac_addr, +}; + +/* Get the hardware ops */ +static void sxgbe_get_ops(struct sxgbe_ops * const ops_ptr) +{ + ops_ptr->mac = sxgbe_get_core_ops(); + ops_ptr->desc = sxgbe_get_desc_ops(); + ops_ptr->dma = sxgbe_get_dma_ops(); + ops_ptr->mtl = sxgbe_get_mtl_ops(); + + /* set the MDIO communication Address/Data regisers */ + ops_ptr->mii.addr = SXGBE_MDIO_SCMD_ADD_REG; + ops_ptr->mii.data = SXGBE_MDIO_SCMD_DATA_REG; + + /* Assigning the default link settings + * no SXGBE defined default values to be set in registers, + * so assigning as 0 for port and duplex + */ + ops_ptr->link.port = 0; + ops_ptr->link.duplex = 0; + ops_ptr->link.speed = SXGBE_SPEED_10G; +} + +/** + * sxgbe_hw_init - Init the GMAC device + * @priv: driver private structure + * Description: this function checks the HW capability + * (if supported) and sets the driver's features. + */ +static int sxgbe_hw_init(struct sxgbe_priv_data * const priv) +{ + u32 ctrl_ids; + + priv->hw = kmalloc(sizeof(*priv->hw), GFP_KERNEL); + if(!priv->hw) + return -ENOMEM; + + /* get the hardware ops */ + sxgbe_get_ops(priv->hw); + + /* get the controller id */ + ctrl_ids = priv->hw->mac->get_controller_version(priv->ioaddr); + priv->hw->ctrl_uid = (ctrl_ids & 0x00ff0000) >> 16; + priv->hw->ctrl_id = (ctrl_ids & 0x000000ff); + pr_info("user ID: 0x%x, Controller ID: 0x%x\n", + priv->hw->ctrl_uid, priv->hw->ctrl_id); + + /* get the H/W features */ + if (!sxgbe_get_hw_features(priv)) + pr_info("Hardware features not found\n"); + + if (priv->hw_cap.tx_csum_offload) + pr_info("TX Checksum offload supported\n"); + + if (priv->hw_cap.rx_csum_offload) + pr_info("RX Checksum offload supported\n"); + + return 0; +} + +/** + * sxgbe_drv_probe + * @device: device pointer + * @plat_dat: platform data pointer + * @addr: iobase memory address + * Description: this is the main probe function used to + * call the alloc_etherdev, allocate the priv structure. + */ +struct sxgbe_priv_data *sxgbe_drv_probe(struct device *device, + struct sxgbe_plat_data *plat_dat, + void __iomem *addr) +{ + struct sxgbe_priv_data *priv; + struct net_device *ndev; + int ret; + u8 queue_num; + + ndev = alloc_etherdev_mqs(sizeof(struct sxgbe_priv_data), + SXGBE_TX_QUEUES, SXGBE_RX_QUEUES); + if (!ndev) + return NULL; + + SET_NETDEV_DEV(ndev, device); + + priv = netdev_priv(ndev); + priv->device = device; + priv->dev = ndev; + + sxgbe_set_ethtool_ops(ndev); + priv->plat = plat_dat; + priv->ioaddr = addr; + + /* Verify driver arguments */ + sxgbe_verify_args(); + + /* Init MAC and get the capabilities */ + ret = sxgbe_hw_init(priv); + if (ret) + goto error_free_netdev; + + /* allocate memory resources for Descriptor rings */ + ret = txring_mem_alloc(priv); + if (ret) + goto error_free_netdev; + + ret = rxring_mem_alloc(priv); + if (ret) + goto error_free_netdev; + + ndev->netdev_ops = &sxgbe_netdev_ops; + + ndev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | + NETIF_F_RXCSUM | NETIF_F_TSO | NETIF_F_TSO6 | + NETIF_F_GRO; + ndev->features |= ndev->hw_features | NETIF_F_HIGHDMA; + ndev->watchdog_timeo = msecs_to_jiffies(TX_TIMEO); + + /* assign filtering support */ + ndev->priv_flags |= IFF_UNICAST_FLT; + + priv->msg_enable = netif_msg_init(debug, default_msg_level); + + /* Enable TCP segmentation offload for all DMA channels */ + if (priv->hw_cap.tcpseg_offload) { + SXGBE_FOR_EACH_QUEUE(SXGBE_TX_QUEUES, queue_num) { + priv->hw->dma->enable_tso(priv->ioaddr, queue_num); + } + } + + /* Enable Rx checksum offload */ + if (priv->hw_cap.rx_csum_offload) { + priv->hw->mac->enable_rx_csum(priv->ioaddr); + priv->rxcsum_insertion = true; + } + + /* Initialise pause frame settings */ + priv->rx_pause = 1; + priv->tx_pause = 1; + + /* Rx Watchdog is available, enable depend on platform data */ + if (!priv->plat->riwt_off) { + priv->use_riwt = 1; + pr_info("Enable RX Mitigation via HW Watchdog Timer\n"); + } + + netif_napi_add(ndev, &priv->napi, sxgbe_poll, 64); + + spin_lock_init(&priv->stats_lock); + + priv->sxgbe_clk = clk_get(priv->device, SXGBE_RESOURCE_NAME); + if (IS_ERR(priv->sxgbe_clk)) { + netdev_warn(ndev, "%s: warning: cannot get CSR clock\n", + __func__); + goto error_clk_get; + } + + /* If a specific clk_csr value is passed from the platform + * this means that the CSR Clock Range selection cannot be + * changed at run-time and it is fixed. Viceversa the driver'll try to + * set the MDC clock dynamically according to the csr actual + * clock input. + */ + if (!priv->plat->clk_csr) + sxgbe_clk_csr_set(priv); + else + priv->clk_csr = priv->plat->clk_csr; + + /* MDIO bus Registration */ + ret = sxgbe_mdio_register(ndev); + if (ret < 0) { + netdev_dbg(ndev, "%s: MDIO bus (id: %d) registration failed\n", + __func__, priv->plat->bus_id); + goto error_mdio_register; + } + + ret = register_netdev(ndev); + if (ret) { + pr_err("%s: ERROR %i registering the device\n", __func__, ret); + goto error_netdev_register; + } + + sxgbe_check_ether_addr(priv); + + return priv; + +error_mdio_register: + clk_put(priv->sxgbe_clk); +error_clk_get: +error_netdev_register: + netif_napi_del(&priv->napi); +error_free_netdev: + free_netdev(ndev); + + return NULL; +} + +/** + * sxgbe_drv_remove + * @ndev: net device pointer + * Description: this function resets the TX/RX processes, disables the MAC RX/TX + * changes the link status, releases the DMA descriptor rings. + */ +int sxgbe_drv_remove(struct net_device *ndev) +{ + struct sxgbe_priv_data *priv = netdev_priv(ndev); + + netdev_info(ndev, "%s: removing driver\n", __func__); + + priv->hw->dma->stop_rx(priv->ioaddr, SXGBE_RX_QUEUES); + priv->hw->dma->stop_tx(priv->ioaddr, SXGBE_TX_QUEUES); + + priv->hw->mac->enable_tx(priv->ioaddr, false); + priv->hw->mac->enable_rx(priv->ioaddr, false); + + netif_napi_del(&priv->napi); + + sxgbe_mdio_unregister(ndev); + + unregister_netdev(ndev); + + free_netdev(ndev); + + return 0; +} + +#ifdef CONFIG_PM +int sxgbe_suspend(struct net_device *ndev) +{ + return 0; +} + +int sxgbe_resume(struct net_device *ndev) +{ + return 0; +} + +int sxgbe_freeze(struct net_device *ndev) +{ + return -ENOSYS; +} + +int sxgbe_restore(struct net_device *ndev) +{ + return -ENOSYS; +} +#endif /* CONFIG_PM */ + +/* Driver is configured as Platform driver */ +static int __init sxgbe_init(void) +{ + int ret; + + ret = sxgbe_register_platform(); + if (ret) + goto err; + return 0; +err: + pr_err("driver registration failed\n"); + return ret; +} + +static void __exit sxgbe_exit(void) +{ + sxgbe_unregister_platform(); +} + +module_init(sxgbe_init); +module_exit(sxgbe_exit); + +#ifndef MODULE +static int __init sxgbe_cmdline_opt(char *str) +{ + char *opt; + + if (!str || !*str) + return -EINVAL; + while ((opt = strsep(&str, ",")) != NULL) { + if (!strncmp(opt, "eee_timer:", 6)) { + if (kstrtoint(opt + 10, 0, &eee_timer)) + goto err; + } + } + return 0; + +err: + pr_err("%s: ERROR broken module parameter conversion\n", __func__); + return -EINVAL; +} + +__setup("sxgbeeth=", sxgbe_cmdline_opt); +#endif /* MODULE */ + + + +MODULE_DESCRIPTION("SAMSUNG 10G/2.5G/1G Ethernet PLATFORM driver"); + +MODULE_PARM_DESC(debug, "Message Level (-1: default, 0: no output, 16: all)"); +MODULE_PARM_DESC(eee_timer, "EEE-LPI Default LS timer value"); + +MODULE_AUTHOR("Siva Reddy Kallam <siva.kallam@samsung.com>"); +MODULE_AUTHOR("ByungHo An <bh74.an@samsung.com>"); +MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>"); +MODULE_AUTHOR("Vipul Pandya <vipul.pandya@samsung.com>"); + +MODULE_LICENSE("GPL"); |