summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc/spi.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/sfc/spi.h')
-rw-r--r--drivers/net/ethernet/sfc/spi.h99
1 files changed, 99 insertions, 0 deletions
diff --git a/drivers/net/ethernet/sfc/spi.h b/drivers/net/ethernet/sfc/spi.h
new file mode 100644
index 00000000000..71f2e3ebe1c
--- /dev/null
+++ b/drivers/net/ethernet/sfc/spi.h
@@ -0,0 +1,99 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005 Fen Systems Ltd.
+ * Copyright 2006-2010 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_SPI_H
+#define EFX_SPI_H
+
+#include "net_driver.h"
+
+/**************************************************************************
+ *
+ * Basic SPI command set and bit definitions
+ *
+ *************************************************************************/
+
+#define SPI_WRSR 0x01 /* Write status register */
+#define SPI_WRITE 0x02 /* Write data to memory array */
+#define SPI_READ 0x03 /* Read data from memory array */
+#define SPI_WRDI 0x04 /* Reset write enable latch */
+#define SPI_RDSR 0x05 /* Read status register */
+#define SPI_WREN 0x06 /* Set write enable latch */
+#define SPI_SST_EWSR 0x50 /* SST: Enable write to status register */
+
+#define SPI_STATUS_WPEN 0x80 /* Write-protect pin enabled */
+#define SPI_STATUS_BP2 0x10 /* Block protection bit 2 */
+#define SPI_STATUS_BP1 0x08 /* Block protection bit 1 */
+#define SPI_STATUS_BP0 0x04 /* Block protection bit 0 */
+#define SPI_STATUS_WEN 0x02 /* State of the write enable latch */
+#define SPI_STATUS_NRDY 0x01 /* Device busy flag */
+
+/**
+ * struct efx_spi_device - an Efx SPI (Serial Peripheral Interface) device
+ * @device_id: Controller's id for the device
+ * @size: Size (in bytes)
+ * @addr_len: Number of address bytes in read/write commands
+ * @munge_address: Flag whether addresses should be munged.
+ * Some devices with 9-bit addresses (e.g. AT25040A EEPROM)
+ * use bit 3 of the command byte as address bit A8, rather
+ * than having a two-byte address. If this flag is set, then
+ * commands should be munged in this way.
+ * @erase_command: Erase command (or 0 if sector erase not needed).
+ * @erase_size: Erase sector size (in bytes)
+ * Erase commands affect sectors with this size and alignment.
+ * This must be a power of two.
+ * @block_size: Write block size (in bytes).
+ * Write commands are limited to blocks with this size and alignment.
+ */
+struct efx_spi_device {
+ int device_id;
+ unsigned int size;
+ unsigned int addr_len;
+ unsigned int munge_address:1;
+ u8 erase_command;
+ unsigned int erase_size;
+ unsigned int block_size;
+};
+
+static inline bool efx_spi_present(const struct efx_spi_device *spi)
+{
+ return spi->size != 0;
+}
+
+int falcon_spi_cmd(struct efx_nic *efx,
+ const struct efx_spi_device *spi, unsigned int command,
+ int address, const void* in, void *out, size_t len);
+int falcon_spi_wait_write(struct efx_nic *efx,
+ const struct efx_spi_device *spi);
+int falcon_spi_read(struct efx_nic *efx,
+ const struct efx_spi_device *spi, loff_t start,
+ size_t len, size_t *retlen, u8 *buffer);
+int falcon_spi_write(struct efx_nic *efx,
+ const struct efx_spi_device *spi, loff_t start,
+ size_t len, size_t *retlen, const u8 *buffer);
+
+/*
+ * SFC4000 flash is partitioned into:
+ * 0-0x400 chip and board config (see falcon_hwdefs.h)
+ * 0x400-0x8000 unused (or may contain VPD if EEPROM not present)
+ * 0x8000-end boot code (mapped to PCI expansion ROM)
+ * SFC4000 small EEPROM (size < 0x400) is used for VPD only.
+ * SFC4000 large EEPROM (size >= 0x400) is partitioned into:
+ * 0-0x400 chip and board config
+ * configurable VPD
+ * 0x800-0x1800 boot config
+ * Aside from the chip and board config, all of these are optional and may
+ * be absent or truncated depending on the devices used.
+ */
+#define FALCON_NVCONFIG_END 0x400U
+#define FALCON_FLASH_BOOTCODE_START 0x8000U
+#define EFX_EEPROM_BOOTCONFIG_START 0x800U
+#define EFX_EEPROM_BOOTCONFIG_END 0x1800U
+
+#endif /* EFX_SPI_H */