diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 36 |
1 files changed, 27 insertions, 9 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index 73195329aa4..ade10823204 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -34,6 +34,22 @@ #define MII_BUSY 0x00000001 #define MII_WRITE 0x00000002 +static int stmmac_mdio_busy_wait(void __iomem *ioaddr, unsigned int mii_addr) +{ + unsigned long curr; + unsigned long finish = jiffies + 3 * HZ; + + do { + curr = jiffies; + if (readl(ioaddr + mii_addr) & MII_BUSY) + cpu_relax(); + else + return 0; + } while (!time_after_eq(curr, finish)); + + return -EBUSY; +} + /** * stmmac_mdio_read * @bus: points to the mii_bus structure @@ -54,11 +70,15 @@ static int stmmac_mdio_read(struct mii_bus *bus, int phyaddr, int phyreg) int data; u16 regValue = (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))); - regValue |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2); + regValue |= MII_BUSY | ((priv->clk_csr & 0xF) << 2); + + if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) + return -EBUSY; - do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); writel(regValue, priv->ioaddr + mii_address); - do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); + + if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) + return -EBUSY; /* Read the data from the MII data register */ data = (int)readl(priv->ioaddr + mii_data); @@ -86,20 +106,18 @@ static int stmmac_mdio_write(struct mii_bus *bus, int phyaddr, int phyreg, (((phyaddr << 11) & (0x0000F800)) | ((phyreg << 6) & (0x000007C0))) | MII_WRITE; - value |= MII_BUSY | ((priv->plat->clk_csr & 7) << 2); - + value |= MII_BUSY | ((priv->clk_csr & 0xF) << 2); /* Wait until any existing MII operation is complete */ - do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); + if (stmmac_mdio_busy_wait(priv->ioaddr, mii_address)) + return -EBUSY; /* Set the MII address register to write */ writel(phydata, priv->ioaddr + mii_data); writel(value, priv->ioaddr + mii_address); /* Wait until any existing MII operation is complete */ - do {} while (((readl(priv->ioaddr + mii_address)) & MII_BUSY) == 1); - - return 0; + return stmmac_mdio_busy_wait(priv->ioaddr, mii_address); } /** |