diff options
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac')
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac.h | 42 | ||||
-rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 33 |
2 files changed, 17 insertions, 58 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index ab4c376cb27..f2d3665430a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -82,9 +82,7 @@ struct stmmac_priv { struct stmmac_counters mmc; struct dma_features dma_cap; int hw_cap_support; -#ifdef CONFIG_HAVE_CLK struct clk *stmmac_clk; -#endif int clk_csr; int synopsys_id; struct timer_list eee_ctrl_timer; @@ -113,46 +111,6 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, void stmmac_disable_eee_mode(struct stmmac_priv *priv); bool stmmac_eee_init(struct stmmac_priv *priv); -#ifdef CONFIG_HAVE_CLK -static inline int stmmac_clk_enable(struct stmmac_priv *priv) -{ - if (!IS_ERR(priv->stmmac_clk)) - return clk_prepare_enable(priv->stmmac_clk); - - return 0; -} - -static inline void stmmac_clk_disable(struct stmmac_priv *priv) -{ - if (IS_ERR(priv->stmmac_clk)) - return; - - clk_disable_unprepare(priv->stmmac_clk); -} -static inline int stmmac_clk_get(struct stmmac_priv *priv) -{ - priv->stmmac_clk = clk_get(priv->device, NULL); - - if (IS_ERR(priv->stmmac_clk)) - return PTR_ERR(priv->stmmac_clk); - - return 0; -} -#else -static inline int stmmac_clk_enable(struct stmmac_priv *priv) -{ - return 0; -} -static inline void stmmac_clk_disable(struct stmmac_priv *priv) -{ -} -static inline int stmmac_clk_get(struct stmmac_priv *priv) -{ - return 0; -} -#endif /* CONFIG_HAVE_CLK */ - - #ifdef CONFIG_STMMAC_PLATFORM extern struct platform_driver stmmac_pltfr_driver; static inline int stmmac_register_platform(void) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index f6b04c1a367..fd8882f9602 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -28,6 +28,7 @@ https://bugzilla.stlinux.com/ *******************************************************************************/ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/ip.h> @@ -173,12 +174,8 @@ static void stmmac_verify_args(void) static void stmmac_clk_csr_set(struct stmmac_priv *priv) { -#ifdef CONFIG_HAVE_CLK u32 clk_rate; - if (IS_ERR(priv->stmmac_clk)) - return; - clk_rate = clk_get_rate(priv->stmmac_clk); /* Platform provided default clk_csr would be assumed valid @@ -200,7 +197,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv) * we can not estimate the proper divider as it is not known * the frequency of clk_csr_i. So we do not change the default * divider. */ -#endif } #if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG) @@ -1070,7 +1066,7 @@ static int stmmac_open(struct net_device *dev) } else priv->tm->enable = 1; #endif - stmmac_clk_enable(priv); + clk_enable(priv->stmmac_clk); stmmac_check_ether_addr(priv); @@ -1192,7 +1188,7 @@ open_error: if (priv->phydev) phy_disconnect(priv->phydev); - stmmac_clk_disable(priv); + clk_disable(priv->stmmac_clk); return ret; } @@ -1250,7 +1246,7 @@ static int stmmac_release(struct net_device *dev) #ifdef CONFIG_STMMAC_DEBUG_FS stmmac_exit_fs(); #endif - stmmac_clk_disable(priv); + clk_disable(priv->stmmac_clk); return 0; } @@ -2078,11 +2074,14 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, ret = register_netdev(ndev); if (ret) { pr_err("%s: ERROR %i registering the device\n", __func__, ret); - goto error; + goto error_netdev_register; } - if (stmmac_clk_get(priv)) + priv->stmmac_clk = clk_get(priv->device, NULL); + if (IS_ERR(priv->stmmac_clk)) { pr_warning("%s: warning: cannot get CSR clock\n", __func__); + goto error_clk_get; + } /* If a specific clk_csr value is passed from the platform * this means that the CSR Clock Range selection cannot be @@ -2100,15 +2099,17 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, if (ret < 0) { pr_debug("%s: MDIO bus (id: %d) registration failed", __func__, priv->plat->bus_id); - goto error; + goto error_mdio_register; } return priv; -error: - netif_napi_del(&priv->napi); - +error_mdio_register: + clk_put(priv->stmmac_clk); +error_clk_get: unregister_netdev(ndev); +error_netdev_register: + netif_napi_del(&priv->napi); free_netdev(ndev); return NULL; @@ -2177,7 +2178,7 @@ int stmmac_suspend(struct net_device *ndev) else { stmmac_set_mac(priv->ioaddr, false); /* Disable clock in case of PWM is off */ - stmmac_clk_disable(priv); + clk_disable(priv->stmmac_clk); } spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -2202,7 +2203,7 @@ int stmmac_resume(struct net_device *ndev) priv->hw->mac->pmt(priv->ioaddr, 0); else /* enable the clk prevously disabled */ - stmmac_clk_enable(priv); + clk_enable(priv->stmmac_clk); netif_device_attach(ndev); |