diff options
Diffstat (limited to 'drivers/net/ethernet/xilinx/xilinx_axienet.h')
| -rw-r--r-- | drivers/net/ethernet/xilinx/xilinx_axienet.h | 508 |
1 files changed, 508 insertions, 0 deletions
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h new file mode 100644 index 00000000000..cc83af083fd --- /dev/null +++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h @@ -0,0 +1,508 @@ +/* + * Definitions for Xilinx Axi Ethernet device driver. + * + * Copyright (c) 2009 Secret Lab Technologies, Ltd. + * Copyright (c) 2010 Xilinx, Inc. All rights reserved. + * Copyright (c) 2012 Daniel Borkmann, <daniel.borkmann@tik.ee.ethz.ch> + * Copyright (c) 2012 Ariane Keller, <ariane.keller@tik.ee.ethz.ch> + */ + +#ifndef XILINX_AXIENET_H +#define XILINX_AXIENET_H + +#include <linux/netdevice.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> + +/* Packet size info */ +#define XAE_HDR_SIZE 14 /* Size of Ethernet header */ +#define XAE_HDR_VLAN_SIZE 18 /* Size of an Ethernet hdr + VLAN */ +#define XAE_TRL_SIZE 4 /* Size of Ethernet trailer (FCS) */ +#define XAE_MTU 1500 /* Max MTU of an Ethernet frame */ +#define XAE_JUMBO_MTU 9000 /* Max MTU of a jumbo Eth. frame */ + +#define XAE_MAX_FRAME_SIZE (XAE_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) +#define XAE_MAX_VLAN_FRAME_SIZE (XAE_MTU + XAE_HDR_VLAN_SIZE + XAE_TRL_SIZE) +#define XAE_MAX_JUMBO_FRAME_SIZE (XAE_JUMBO_MTU + XAE_HDR_SIZE + XAE_TRL_SIZE) + +/* Configuration options */ + +/* Accept all incoming packets. Default: disabled (cleared) */ +#define XAE_OPTION_PROMISC (1 << 0) + +/* Jumbo frame support for Tx & Rx. Default: disabled (cleared) */ +#define XAE_OPTION_JUMBO (1 << 1) + +/* VLAN Rx & Tx frame support. Default: disabled (cleared) */ +#define XAE_OPTION_VLAN (1 << 2) + +/* Enable recognition of flow control frames on Rx. Default: enabled (set) */ +#define XAE_OPTION_FLOW_CONTROL (1 << 4) + +/* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not + * stripped. Default: disabled (set) */ +#define XAE_OPTION_FCS_STRIP (1 << 5) + +/* Generate FCS field and add PAD automatically for outgoing frames. + * Default: enabled (set) */ +#define XAE_OPTION_FCS_INSERT (1 << 6) + +/* Enable Length/Type error checking for incoming frames. When this option is + * set, the MAC will filter frames that have a mismatched type/length field + * and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these + * types of frames are encountered. When this option is cleared, the MAC will + * allow these types of frames to be received. Default: enabled (set) */ +#define XAE_OPTION_LENTYPE_ERR (1 << 7) + +/* Enable the transmitter. Default: enabled (set) */ +#define XAE_OPTION_TXEN (1 << 11) + +/* Enable the receiver. Default: enabled (set) */ +#define XAE_OPTION_RXEN (1 << 12) + +/* Default options set when device is initialized or reset */ +#define XAE_OPTION_DEFAULTS \ + (XAE_OPTION_TXEN | \ + XAE_OPTION_FLOW_CONTROL | \ + XAE_OPTION_RXEN) + +/* Axi DMA Register definitions */ + +#define XAXIDMA_TX_CR_OFFSET 0x00000000 /* Channel control */ +#define XAXIDMA_TX_SR_OFFSET 0x00000004 /* Status */ +#define XAXIDMA_TX_CDESC_OFFSET 0x00000008 /* Current descriptor pointer */ +#define XAXIDMA_TX_TDESC_OFFSET 0x00000010 /* Tail descriptor pointer */ + +#define XAXIDMA_RX_CR_OFFSET 0x00000030 /* Channel control */ +#define XAXIDMA_RX_SR_OFFSET 0x00000034 /* Status */ +#define XAXIDMA_RX_CDESC_OFFSET 0x00000038 /* Current descriptor pointer */ +#define XAXIDMA_RX_TDESC_OFFSET 0x00000040 /* Tail descriptor pointer */ + +#define XAXIDMA_CR_RUNSTOP_MASK 0x00000001 /* Start/stop DMA channel */ +#define XAXIDMA_CR_RESET_MASK 0x00000004 /* Reset DMA engine */ + +#define XAXIDMA_BD_NDESC_OFFSET 0x00 /* Next descriptor pointer */ +#define XAXIDMA_BD_BUFA_OFFSET 0x08 /* Buffer address */ +#define XAXIDMA_BD_CTRL_LEN_OFFSET 0x18 /* Control/buffer length */ +#define XAXIDMA_BD_STS_OFFSET 0x1C /* Status */ +#define XAXIDMA_BD_USR0_OFFSET 0x20 /* User IP specific word0 */ +#define XAXIDMA_BD_USR1_OFFSET 0x24 /* User IP specific word1 */ +#define XAXIDMA_BD_USR2_OFFSET 0x28 /* User IP specific word2 */ +#define XAXIDMA_BD_USR3_OFFSET 0x2C /* User IP specific word3 */ +#define XAXIDMA_BD_USR4_OFFSET 0x30 /* User IP specific word4 */ +#define XAXIDMA_BD_ID_OFFSET 0x34 /* Sw ID */ +#define XAXIDMA_BD_HAS_STSCNTRL_OFFSET 0x38 /* Whether has stscntrl strm */ +#define XAXIDMA_BD_HAS_DRE_OFFSET 0x3C /* Whether has DRE */ + +#define XAXIDMA_BD_HAS_DRE_SHIFT 8 /* Whether has DRE shift */ +#define XAXIDMA_BD_HAS_DRE_MASK 0xF00 /* Whether has DRE mask */ +#define XAXIDMA_BD_WORDLEN_MASK 0xFF /* Whether has DRE mask */ + +#define XAXIDMA_BD_CTRL_LENGTH_MASK 0x007FFFFF /* Requested len */ +#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ +#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ +#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ + +#define XAXIDMA_DELAY_MASK 0xFF000000 /* Delay timeout counter */ +#define XAXIDMA_COALESCE_MASK 0x00FF0000 /* Coalesce counter */ + +#define XAXIDMA_DELAY_SHIFT 24 +#define XAXIDMA_COALESCE_SHIFT 16 + +#define XAXIDMA_IRQ_IOC_MASK 0x00001000 /* Completion intr */ +#define XAXIDMA_IRQ_DELAY_MASK 0x00002000 /* Delay interrupt */ +#define XAXIDMA_IRQ_ERROR_MASK 0x00004000 /* Error interrupt */ +#define XAXIDMA_IRQ_ALL_MASK 0x00007000 /* All interrupts */ + +/* Default TX/RX Threshold and waitbound values for SGDMA mode */ +#define XAXIDMA_DFT_TX_THRESHOLD 24 +#define XAXIDMA_DFT_TX_WAITBOUND 254 +#define XAXIDMA_DFT_RX_THRESHOLD 24 +#define XAXIDMA_DFT_RX_WAITBOUND 254 + +#define XAXIDMA_BD_CTRL_TXSOF_MASK 0x08000000 /* First tx packet */ +#define XAXIDMA_BD_CTRL_TXEOF_MASK 0x04000000 /* Last tx packet */ +#define XAXIDMA_BD_CTRL_ALL_MASK 0x0C000000 /* All control bits */ + +#define XAXIDMA_BD_STS_ACTUAL_LEN_MASK 0x007FFFFF /* Actual len */ +#define XAXIDMA_BD_STS_COMPLETE_MASK 0x80000000 /* Completed */ +#define XAXIDMA_BD_STS_DEC_ERR_MASK 0x40000000 /* Decode error */ +#define XAXIDMA_BD_STS_SLV_ERR_MASK 0x20000000 /* Slave error */ +#define XAXIDMA_BD_STS_INT_ERR_MASK 0x10000000 /* Internal err */ +#define XAXIDMA_BD_STS_ALL_ERR_MASK 0x70000000 /* All errors */ +#define XAXIDMA_BD_STS_RXSOF_MASK 0x08000000 /* First rx pkt */ +#define XAXIDMA_BD_STS_RXEOF_MASK 0x04000000 /* Last rx pkt */ +#define XAXIDMA_BD_STS_ALL_MASK 0xFC000000 /* All status bits */ + +#define XAXIDMA_BD_MINIMUM_ALIGNMENT 0x40 + +/* Axi Ethernet registers definition */ +#define XAE_RAF_OFFSET 0x00000000 /* Reset and Address filter */ +#define XAE_TPF_OFFSET 0x00000004 /* Tx Pause Frame */ +#define XAE_IFGP_OFFSET 0x00000008 /* Tx Inter-frame gap adjustment*/ +#define XAE_IS_OFFSET 0x0000000C /* Interrupt status */ +#define XAE_IP_OFFSET 0x00000010 /* Interrupt pending */ +#define XAE_IE_OFFSET 0x00000014 /* Interrupt enable */ +#define XAE_TTAG_OFFSET 0x00000018 /* Tx VLAN TAG */ +#define XAE_RTAG_OFFSET 0x0000001C /* Rx VLAN TAG */ +#define XAE_UAWL_OFFSET 0x00000020 /* Unicast address word lower */ +#define XAE_UAWU_OFFSET 0x00000024 /* Unicast address word upper */ +#define XAE_TPID0_OFFSET 0x00000028 /* VLAN TPID0 register */ +#define XAE_TPID1_OFFSET 0x0000002C /* VLAN TPID1 register */ +#define XAE_PPST_OFFSET 0x00000030 /* PCS PMA Soft Temac Status Reg */ +#define XAE_RCW0_OFFSET 0x00000400 /* Rx Configuration Word 0 */ +#define XAE_RCW1_OFFSET 0x00000404 /* Rx Configuration Word 1 */ +#define XAE_TC_OFFSET 0x00000408 /* Tx Configuration */ +#define XAE_FCC_OFFSET 0x0000040C /* Flow Control Configuration */ +#define XAE_EMMC_OFFSET 0x00000410 /* EMAC mode configuration */ +#define XAE_PHYC_OFFSET 0x00000414 /* RGMII/SGMII configuration */ +#define XAE_MDIO_MC_OFFSET 0x00000500 /* MII Management Config */ +#define XAE_MDIO_MCR_OFFSET 0x00000504 /* MII Management Control */ +#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */ +#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */ +#define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */ +#define XAE_MDIO_MIP_OFFSET 0x00000620 /* MII Mgmt Interrupt Pending + * register offset */ +#define XAE_MDIO_MIE_OFFSET 0x00000640 /* MII Management Interrupt Enable + * register offset */ +#define XAE_MDIO_MIC_OFFSET 0x00000660 /* MII Management Interrupt Clear + * register offset. */ +#define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */ +#define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */ +#define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */ +#define XAE_AF0_OFFSET 0x00000710 /* Address Filter 0 */ +#define XAE_AF1_OFFSET 0x00000714 /* Address Filter 1 */ + +#define XAE_TX_VLAN_DATA_OFFSET 0x00004000 /* TX VLAN data table address */ +#define XAE_RX_VLAN_DATA_OFFSET 0x00008000 /* RX VLAN data table address */ +#define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */ + +/* Bit Masks for Axi Ethernet RAF register */ +#define XAE_RAF_MCSTREJ_MASK 0x00000002 /* Reject receive multicast + * destination address */ +#define XAE_RAF_BCSTREJ_MASK 0x00000004 /* Reject receive broadcast + * destination address */ +#define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */ +#define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */ +#define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */ +#define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */ +#define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */ +#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 /* Exteneded Multicast + * Filtering mode + */ +#define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */ +#define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */ +#define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */ +#define XAE_RAF_RXVTAGMODE_SHIFT 5 /* Rx Tag mode shift bits */ +#define XAE_RAF_TXVSTRPMODE_SHIFT 7 /* Tx strip mode shift bits*/ +#define XAE_RAF_RXVSTRPMODE_SHIFT 9 /* Rx Strip mode shift bits*/ + +/* Bit Masks for Axi Ethernet TPF and IFGP registers */ +#define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */ +#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Transmit inter-frame + * gap adjustment value */ + +/* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply + * for all 3 registers. */ +#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 /* Hard register access + * complete */ +#define XAE_INT_AUTONEG_MASK 0x00000002 /* Auto negotiation + * complete */ +#define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */ +#define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */ +#define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */ +#define XAE_INT_TXCMPIT_MASK 0x00000020 /* Tx complete */ +#define XAE_INT_RXDCMLOCK_MASK 0x00000040 /* Rx Dcm Lock */ +#define XAE_INT_MGTRDY_MASK 0x00000080 /* MGT clock Lock */ +#define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */ +#define XAE_INT_ALL_MASK 0x0000003F /* All the ints */ + +#define XAE_INT_RECV_ERROR_MASK \ + (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that + * indicate receive + * errors */ + +/* Bit masks for Axi Ethernet VLAN TPID Word 0 register */ +#define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */ +#define XAE_TPID_1_MASK 0xFFFF0000 /* TPID 1 */ + +/* Bit masks for Axi Ethernet VLAN TPID Word 1 register */ +#define XAE_TPID_2_MASK 0x0000FFFF /* TPID 0 */ +#define XAE_TPID_3_MASK 0xFFFF0000 /* TPID 1 */ + +/* Bit masks for Axi Ethernet RCW1 register */ +#define XAE_RCW1_RST_MASK 0x80000000 /* Reset */ +#define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */ +#define XAE_RCW1_FCS_MASK 0x20000000 /* In-Band FCS enable + * (FCS not stripped) */ +#define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */ +#define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */ +#define XAE_RCW1_LT_DIS_MASK 0x02000000 /* Length/type field valid check + * disable */ +#define XAE_RCW1_CL_DIS_MASK 0x01000000 /* Control frame Length check + * disable */ +#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address + * bits [47:32]. Bits [31:0] are + * stored in register RCW0 */ + +/* Bit masks for Axi Ethernet TC register */ +#define XAE_TC_RST_MASK 0x80000000 /* Reset */ +#define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */ +#define XAE_TC_FCS_MASK 0x20000000 /* In-Band FCS enable + * (FCS not generated) */ +#define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */ +#define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */ +#define XAE_TC_IFG_MASK 0x02000000 /* Inter-frame gap adjustment + * enable */ + +/* Bit masks for Axi Ethernet FCC register */ +#define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */ +#define XAE_FCC_FCTX_MASK 0x40000000 /* Tx flow control enable */ + +/* Bit masks for Axi Ethernet EMMC register */ +#define XAE_EMMC_LINKSPEED_MASK 0xC0000000 /* Link speed */ +#define XAE_EMMC_RGMII_MASK 0x20000000 /* RGMII mode enable */ +#define XAE_EMMC_SGMII_MASK 0x10000000 /* SGMII mode enable */ +#define XAE_EMMC_GPCS_MASK 0x08000000 /* 1000BaseX mode enable */ +#define XAE_EMMC_HOST_MASK 0x04000000 /* Host interface enable */ +#define XAE_EMMC_TX16BIT 0x02000000 /* 16 bit Tx client enable */ +#define XAE_EMMC_RX16BIT 0x01000000 /* 16 bit Rx client enable */ +#define XAE_EMMC_LINKSPD_10 0x00000000 /* Link Speed mask for 10 Mbit */ +#define XAE_EMMC_LINKSPD_100 0x40000000 /* Link Speed mask for 100 Mbit */ +#define XAE_EMMC_LINKSPD_1000 0x80000000 /* Link Speed mask for 1000 Mbit */ + +/* Bit masks for Axi Ethernet PHYC register */ +#define XAE_PHYC_SGMIILINKSPEED_MASK 0xC0000000 /* SGMII link speed mask*/ +#define XAE_PHYC_RGMIILINKSPEED_MASK 0x0000000C /* RGMII link speed */ +#define XAE_PHYC_RGMIIHD_MASK 0x00000002 /* RGMII Half-duplex */ +#define XAE_PHYC_RGMIILINK_MASK 0x00000001 /* RGMII link status */ +#define XAE_PHYC_RGLINKSPD_10 0x00000000 /* RGMII link 10 Mbit */ +#define XAE_PHYC_RGLINKSPD_100 0x00000004 /* RGMII link 100 Mbit */ +#define XAE_PHYC_RGLINKSPD_1000 0x00000008 /* RGMII link 1000 Mbit */ +#define XAE_PHYC_SGLINKSPD_10 0x00000000 /* SGMII link 10 Mbit */ +#define XAE_PHYC_SGLINKSPD_100 0x40000000 /* SGMII link 100 Mbit */ +#define XAE_PHYC_SGLINKSPD_1000 0x80000000 /* SGMII link 1000 Mbit */ + +/* Bit masks for Axi Ethernet MDIO interface MC register */ +#define XAE_MDIO_MC_MDIOEN_MASK 0x00000040 /* MII management enable */ +#define XAE_MDIO_MC_CLOCK_DIVIDE_MAX 0x3F /* Maximum MDIO divisor */ + +/* Bit masks for Axi Ethernet MDIO interface MCR register */ +#define XAE_MDIO_MCR_PHYAD_MASK 0x1F000000 /* Phy Address Mask */ +#define XAE_MDIO_MCR_PHYAD_SHIFT 24 /* Phy Address Shift */ +#define XAE_MDIO_MCR_REGAD_MASK 0x001F0000 /* Reg Address Mask */ +#define XAE_MDIO_MCR_REGAD_SHIFT 16 /* Reg Address Shift */ +#define XAE_MDIO_MCR_OP_MASK 0x0000C000 /* Operation Code Mask */ +#define XAE_MDIO_MCR_OP_SHIFT 13 /* Operation Code Shift */ +#define XAE_MDIO_MCR_OP_READ_MASK 0x00008000 /* Op Code Read Mask */ +#define XAE_MDIO_MCR_OP_WRITE_MASK 0x00004000 /* Op Code Write Mask */ +#define XAE_MDIO_MCR_INITIATE_MASK 0x00000800 /* Ready Mask */ +#define XAE_MDIO_MCR_READY_MASK 0x00000080 /* Ready Mask */ + +/* Bit masks for Axi Ethernet MDIO interface MIS, MIP, MIE, MIC registers */ +#define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */ + +/* Bit masks for Axi Ethernet UAW1 register */ +#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF /* Station address bits + * [47:32]; Station address + * bits [31:0] are stored in + * register UAW0 */ + +/* Bit masks for Axi Ethernet FMI register */ +#define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */ +#define XAE_FMI_IND_MASK 0x00000003 /* Index Mask */ + +#define XAE_MDIO_DIV_DFT 29 /* Default MDIO clock divisor */ + +/* Defines for different options for C_PHY_TYPE parameter in Axi Ethernet IP */ +#define XAE_PHY_TYPE_MII 0 +#define XAE_PHY_TYPE_GMII 1 +#define XAE_PHY_TYPE_RGMII_1_3 2 +#define XAE_PHY_TYPE_RGMII_2_0 3 +#define XAE_PHY_TYPE_SGMII 4 +#define XAE_PHY_TYPE_1000BASE_X 5 + +#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Total number of entries in the + * hardware multicast table. */ + +/* Axi Ethernet Synthesis features */ +#define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0) +#define XAE_FEATURE_PARTIAL_TX_CSUM (1 << 1) +#define XAE_FEATURE_FULL_RX_CSUM (1 << 2) +#define XAE_FEATURE_FULL_TX_CSUM (1 << 3) + +#define XAE_NO_CSUM_OFFLOAD 0 + +#define XAE_FULL_CSUM_STATUS_MASK 0x00000038 +#define XAE_IP_UDP_CSUM_VALIDATED 0x00000003 +#define XAE_IP_TCP_CSUM_VALIDATED 0x00000002 + +#define DELAY_OF_ONE_MILLISEC 1000 + +/** + * struct axidma_bd - Axi Dma buffer descriptor layout + * @next: MM2S/S2MM Next Descriptor Pointer + * @reserved1: Reserved and not used + * @phys: MM2S/S2MM Buffer Address + * @reserved2: Reserved and not used + * @reserved3: Reserved and not used + * @reserved4: Reserved and not used + * @cntrl: MM2S/S2MM Control value + * @status: MM2S/S2MM Status value + * @app0: MM2S/S2MM User Application Field 0. + * @app1: MM2S/S2MM User Application Field 1. + * @app2: MM2S/S2MM User Application Field 2. + * @app3: MM2S/S2MM User Application Field 3. + * @app4: MM2S/S2MM User Application Field 4. + * @sw_id_offset: MM2S/S2MM Sw ID + * @reserved5: Reserved and not used + * @reserved6: Reserved and not used + */ +struct axidma_bd { + u32 next; /* Physical address of next buffer descriptor */ + u32 reserved1; + u32 phys; + u32 reserved2; + u32 reserved3; + u32 reserved4; + u32 cntrl; + u32 status; + u32 app0; + u32 app1; /* TX start << 16 | insert */ + u32 app2; /* TX csum seed */ + u32 app3; + u32 app4; + u32 sw_id_offset; + u32 reserved5; + u32 reserved6; +}; + +/** + * struct axienet_local - axienet private per device data + * @ndev: Pointer for net_device to which it will be attached. + * @dev: Pointer to device structure + * @phy_dev: Pointer to PHY device structure attached to the axienet_local + * @phy_node: Pointer to device node structure + * @mii_bus: Pointer to MII bus structure + * @mdio_irqs: IRQs table for MDIO bus required in mii_bus structure + * @regs: Base address for the axienet_local device address space + * @dma_regs: Base address for the axidma device address space + * @dma_err_tasklet: Tasklet structure to process Axi DMA errors + * @tx_irq: Axidma TX IRQ number + * @rx_irq: Axidma RX IRQ number + * @temac_type: axienet type to identify between soft and hard temac + * @phy_type: Phy type to identify between MII/GMII/RGMII/SGMII/1000 Base-X + * @options: AxiEthernet option word + * @last_link: Phy link state in which the PHY was negotiated earlier + * @features: Stores the extended features supported by the axienet hw + * @tx_bd_v: Virtual address of the TX buffer descriptor ring + * @tx_bd_p: Physical address(start address) of the TX buffer descr. ring + * @rx_bd_v: Virtual address of the RX buffer descriptor ring + * @rx_bd_p: Physical address(start address) of the RX buffer descr. ring + * @tx_bd_ci: Stores the index of the Tx buffer descriptor in the ring being + * accessed currently. Used while alloc. BDs before a TX starts + * @tx_bd_tail: Stores the index of the Tx buffer descriptor in the ring being + * accessed currently. Used while processing BDs after the TX + * completed. + * @rx_bd_ci: Stores the index of the Rx buffer descriptor in the ring being + * accessed currently. + * @max_frm_size: Stores the maximum size of the frame that can be that + * Txed/Rxed in the existing hardware. If jumbo option is + * supported, the maximum frame size would be 9k. Else it is + * 1522 bytes (assuming support for basic VLAN) + * @jumbo_support: Stores hardware configuration for jumbo support. If hardware + * can handle jumbo packets, this entry will be 1, else 0. + */ +struct axienet_local { + struct net_device *ndev; + struct device *dev; + + /* Connection to PHY device */ + struct phy_device *phy_dev; /* Pointer to PHY device */ + struct device_node *phy_node; + + /* MDIO bus data */ + struct mii_bus *mii_bus; /* MII bus reference */ + int mdio_irqs[PHY_MAX_ADDR]; /* IRQs table for MDIO bus */ + + /* IO registers, dma functions and IRQs */ + void __iomem *regs; + void __iomem *dma_regs; + + struct tasklet_struct dma_err_tasklet; + + int tx_irq; + int rx_irq; + u32 temac_type; + u32 phy_type; + + u32 options; /* Current options word */ + u32 last_link; + u32 features; + + /* Buffer descriptors */ + struct axidma_bd *tx_bd_v; + dma_addr_t tx_bd_p; + struct axidma_bd *rx_bd_v; + dma_addr_t rx_bd_p; + u32 tx_bd_ci; + u32 tx_bd_tail; + u32 rx_bd_ci; + + u32 max_frm_size; + u32 jumbo_support; + + int csum_offload_on_tx_path; + int csum_offload_on_rx_path; + + u32 coalesce_count_rx; + u32 coalesce_count_tx; +}; + +/** + * struct axiethernet_option - Used to set axi ethernet hardware options + * @opt: Option to be set. + * @reg: Register offset to be written for setting the option + * @m_or: Mask to be ORed for setting the option in the register + */ +struct axienet_option { + u32 opt; + u32 reg; + u32 m_or; +}; + +/** + * axienet_ior - Memory mapped Axi Ethernet register read + * @lp: Pointer to axienet local structure + * @offset: Address offset from the base address of Axi Ethernet core + * + * returns: The contents of the Axi Ethernet register + * + * This function returns the contents of the corresponding register. + */ +static inline u32 axienet_ior(struct axienet_local *lp, off_t offset) +{ + return in_be32(lp->regs + offset); +} + +/** + * axienet_iow - Memory mapped Axi Ethernet register write + * @lp: Pointer to axienet local structure + * @offset: Address offset from the base address of Axi Ethernet core + * @value: Value to be written into the Axi Ethernet register + * + * This function writes the desired value into the corresponding Axi Ethernet + * register. + */ +static inline void axienet_iow(struct axienet_local *lp, off_t offset, + u32 value) +{ + out_be32((lp->regs + offset), value); +} + +/* Function prototypes visible in xilinx_axienet_mdio.c for other files */ +int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np); +int axienet_mdio_wait_until_ready(struct axienet_local *lp); +void axienet_mdio_teardown(struct axienet_local *lp); + +#endif /* XILINX_AXI_ENET_H */ |