diff options
Diffstat (limited to 'drivers/net/gianfar.c')
| -rw-r--r-- | drivers/net/gianfar.c | 29 |
1 files changed, 27 insertions, 2 deletions
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index c52f3712ecd..cee8ae71473 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -85,6 +85,7 @@ #include <linux/net_tstamp.h> #include <asm/io.h> +#include <asm/reg.h> #include <asm/irq.h> #include <asm/uaccess.h> #include <linux/module.h> @@ -928,6 +929,24 @@ static void gfar_init_filer_table(struct gfar_private *priv) } } +static void gfar_detect_errata(struct gfar_private *priv) +{ + struct device *dev = &priv->ofdev->dev; + unsigned int pvr = mfspr(SPRN_PVR); + unsigned int svr = mfspr(SPRN_SVR); + unsigned int mod = (svr >> 16) & 0xfff6; /* w/o E suffix */ + unsigned int rev = svr & 0xffff; + + /* MPC8313 Rev 2.0 and higher; All MPC837x */ + if ((pvr == 0x80850010 && mod == 0x80b0 && rev >= 0x0020) || + (pvr == 0x80861010 && (mod & 0xfff9) == 0x80c0)) + priv->errata |= GFAR_ERRATA_74; + + if (priv->errata) + dev_info(dev, "enabled errata workarounds, flags: 0x%x\n", + priv->errata); +} + /* Set up the ethernet device structure, private data, * and anything else we need before we start */ static int gfar_probe(struct of_device *ofdev, @@ -960,6 +979,8 @@ static int gfar_probe(struct of_device *ofdev, dev_set_drvdata(&ofdev->dev, priv); regs = priv->gfargrp[0].regs; + gfar_detect_errata(priv); + /* Stop the DMA engine now, in case it was running before */ /* (The firmware could have used it, and left it running). */ gfar_halt(dev); @@ -974,7 +995,10 @@ static int gfar_probe(struct of_device *ofdev, gfar_write(®s->maccfg1, tempval); /* Initialize MACCFG2. */ - gfar_write(®s->maccfg2, MACCFG2_INIT_SETTINGS); + tempval = MACCFG2_INIT_SETTINGS; + if (gfar_has_errata(priv, GFAR_ERRATA_74)) + tempval |= MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK; + gfar_write(®s->maccfg2, tempval); /* Initialize ECNTRL */ gfar_write(®s->ecntrl, ECNTRL_INIT_SETTINGS); @@ -2300,7 +2324,8 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu) * to allow huge frames, and to check the length */ tempval = gfar_read(®s->maccfg2); - if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE) + if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE || + gfar_has_errata(priv, GFAR_ERRATA_74)) tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK); else tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK); |