summaryrefslogtreecommitdiffstats
path: root/drivers/net/hp100.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/hp100.c')
-rw-r--r--drivers/net/hp100.c155
1 files changed, 77 insertions, 78 deletions
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index e7d9bf33028..03b3df33d81 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -1,24 +1,24 @@
/*
-** hp100.c
+** hp100.c
** HP CASCADE Architecture Driver for 100VG-AnyLan Network Adapters
**
** $Id: hp100.c,v 1.58 2001/09/24 18:03:01 perex Exp perex $
**
** Based on the HP100 driver written by Jaroslav Kysela <perex@jcu.cz>
-** Extended for new busmaster capable chipsets by
+** Extended for new busmaster capable chipsets by
** Siegfried "Frieder" Loeffler (dg1sek) <floeff@mathematik.uni-stuttgart.de>
**
** Maintained by: Jaroslav Kysela <perex@suse.cz>
-**
+**
** This driver has only been tested with
** -- HP J2585B 10/100 Mbit/s PCI Busmaster
-** -- HP J2585A 10/100 Mbit/s PCI
+** -- HP J2585A 10/100 Mbit/s PCI
** -- HP J2970A 10 Mbit/s PCI Combo 10base-T/BNC
** -- HP J2973A 10 Mbit/s PCI 10base-T
** -- HP J2573 10/100 ISA
** -- Compex ReadyLink ENET100-VG4 10/100 Mbit/s PCI / EISA
** -- Compex FreedomLine 100/VG 10/100 Mbit/s ISA / EISA / PCI
-**
+**
** but it should also work with the other CASCADE based adapters.
**
** TODO:
@@ -65,7 +65,7 @@
** - timing changes in xmit routines, relogin to 100VG hub added when
** driver does reset
** - included fix for Compex FreedomLine PCI adapter
-**
+**
** 1.54 -> 1.55
** - fixed bad initialization in init_module
** - added Compex FreedomLine adapter
@@ -73,10 +73,10 @@
**
** 1.53 -> 1.54
** - added hardware multicast filter support (doesn't work)
-** - little changes in hp100_sense_lan routine
+** - little changes in hp100_sense_lan routine
** - added support for Coax and AUI (J2970)
** - fix for multiple cards and hp100_mode parameter (insmod)
-** - fix for shared IRQ
+** - fix for shared IRQ
**
** 1.52 -> 1.53
** - fixed bug in multicast support
@@ -111,7 +111,6 @@
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/types.h>
-#include <linux/config.h> /* for CONFIG_PCI */
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/bitops.h>
@@ -287,7 +286,7 @@ static inline dma_addr_t virt_to_whatever(struct net_device *dev, u32 * ptr)
static inline u_int pdl_map_data(struct hp100_private *lp, void *data)
{
- return pci_map_single(lp->pci_dev, data,
+ return pci_map_single(lp->pci_dev, data,
MAX_ETHER_SIZE, PCI_DMA_FROMDEVICE);
}
@@ -354,7 +353,7 @@ static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr)
goto err;
for (i = 0; i < ARRAY_SIZE(hp100_isa_tbl); i++) {
- if (!strcmp(hp100_isa_tbl[i], sig))
+ if (!strcmp(hp100_isa_tbl[i], sig))
break;
}
@@ -374,11 +373,11 @@ static int __init hp100_isa_probe(struct net_device *dev, int addr)
{
int err = -ENODEV;
- /* Probe for a specific ISA address */
+ /* Probe for a specific ISA address */
if (addr > 0xff && addr < 0x400)
err = hp100_isa_probe1(dev, addr);
- else if (addr != 0)
+ else if (addr != 0)
err = -ENXIO;
else {
@@ -449,7 +448,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
if (!request_region(ioaddr, HP100_REGION_SIZE, "hp100"))
goto out1;
- if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE)
+ if (hp100_inw(HW_ID) != HP100_HW_ID_CASCADE)
goto out2;
chip = hp100_inw(PAGING) & HP100_CHIPID_MASK;
@@ -492,7 +491,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
* Use the variable "hp100_mode" upon insmod or as kernel parameter to
* force driver modes:
* hp100_mode=1 -> default, use busmaster mode if configured.
- * hp100_mode=2 -> enable shared memory mode
+ * hp100_mode=2 -> enable shared memory mode
* hp100_mode=3 -> force use of i/o mapped mode.
* hp100_mode=4 -> same as 1, but re-set the enable bit on the card.
*/
@@ -690,9 +689,9 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
hp100_clear_stats(lp, ioaddr);
/* If busmaster mode is wanted, a dma-capable memory area is needed for
- * the rx and tx PDLs
+ * the rx and tx PDLs
* PCI cards can access the whole PC memory. Therefore GFP_DMA is not
- * needed for the allocation of the memory area.
+ * needed for the allocation of the memory area.
*/
/* TODO: We do not need this with old cards, where PDLs are stored
@@ -719,7 +718,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
}
/* Initialise the card. */
- /* (I'm not really sure if it's a good idea to do this during probing, but
+ /* (I'm not really sure if it's a good idea to do this during probing, but
* like this it's assured that the lan connection type can be sensed
* correctly)
*/
@@ -779,8 +778,8 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
return 0;
out3:
if (local_mode == 1)
- pci_free_consistent(lp->pci_dev, MAX_RINGSIZE + 0x0f,
- lp->page_vaddr_algn,
+ pci_free_consistent(lp->pci_dev, MAX_RINGSIZE + 0x0f,
+ lp->page_vaddr_algn,
virt_to_whatever(dev, lp->page_vaddr_algn));
if (mem_ptr_virt)
iounmap(mem_ptr_virt);
@@ -861,7 +860,7 @@ static void hp100_hwinit(struct net_device *dev)
/* Next comes code from mmuinit procedure of SCO BM driver which is
* called from HWconfigure in the SCO driver. */
- /* Initialise MMU, eventually switch on Busmaster Mode, initialise
+ /* Initialise MMU, eventually switch on Busmaster Mode, initialise
* multicast filter...
*/
hp100_mmuinit(dev);
@@ -879,11 +878,11 @@ static void hp100_hwinit(struct net_device *dev)
hp100_login_to_vg_hub(dev, 0); /* relogin */
}
-
-/*
+
+/*
* mmuinit - Reinitialise Cascade MMU and MAC settings.
- * Note: Must already be in reset and leaves card in reset.
+ * Note: Must already be in reset and leaves card in reset.
*/
static void hp100_mmuinit(struct net_device *dev)
{
@@ -909,7 +908,7 @@ static void hp100_mmuinit(struct net_device *dev)
hp100_outw(0xffff, IRQ_STATUS); /* ack IRQ */
/*
- * Enable Hardware
+ * Enable Hardware
* - Clear Debug En, Rx Hdr Pipe, EE En, I/O En, Fake Int and Intr En
* - Set Tri-State Int, Bus Master Rd/Wr, and Mem Map Disable
* - Clear Priority, Advance Pkt and Xmit Cmd
@@ -984,7 +983,7 @@ static void hp100_mmuinit(struct net_device *dev)
* 4 bytes for header). We will leave NUM_RXPDLS * 508 (rounded
* to the next higher 1k boundary) bytes for the rx-pdl's
* Note: For non-etr chips the transmit stop register must be
- * programmed on a 1k boundary, i.e. bits 9:0 must be zero.
+ * programmed on a 1k boundary, i.e. bits 9:0 must be zero.
*/
pdl_stop = lp->memory_size;
xmit_stop = (pdl_stop - 508 * (MAX_RX_PDL) - 16) & ~(0x03ff);
@@ -1132,10 +1131,10 @@ static int hp100_close(struct net_device *dev)
return 0;
}
-
+
/*
- * Configure the PDL Rx rings and LAN
+ * Configure the PDL Rx rings and LAN
*/
static void hp100_init_pdls(struct net_device *dev)
{
@@ -1183,7 +1182,7 @@ static void hp100_init_pdls(struct net_device *dev)
}
}
}
-
+
/* These functions "format" the entries in the pdl structure */
/* They return how much memory the fragments need. */
@@ -1201,10 +1200,10 @@ static int hp100_init_rxpdl(struct net_device *dev,
ringptr->pdl_paddr = virt_to_whatever(dev, pdlptr + 1);
ringptr->skb = (void *) NULL;
- /*
+ /*
* Write address and length of first PDL Fragment (which is used for
* storing the RX-Header
- * We use the 4 bytes _before_ the PDH in the pdl memory area to
+ * We use the 4 bytes _before_ the PDH in the pdl memory area to
* store this information. (PDH is at offset 0x04)
*/
/* Note that pdlptr+1 and not pdlptr is the pointer to the PDH */
@@ -1231,9 +1230,9 @@ static int hp100_init_txpdl(struct net_device *dev,
}
/*
- * hp100_build_rx_pdl allocates an skb_buff of maximum size plus two bytes
+ * hp100_build_rx_pdl allocates an skb_buff of maximum size plus two bytes
* for possible odd word alignment rounding up to next dword and set PDL
- * address for fragment#2
+ * address for fragment#2
* Returns: 0 if unable to allocate skb_buff
* 1 if successful
*/
@@ -1253,13 +1252,13 @@ static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
#endif
/* Allocate skb buffer of maximum size */
- /* Note: This depends on the alloc_skb functions allocating more
+ /* Note: This depends on the alloc_skb functions allocating more
* space than requested, i.e. aligning to 16bytes */
ringptr->skb = dev_alloc_skb(((MAX_ETHER_SIZE + 2 + 3) / 4) * 4);
if (NULL != ringptr->skb) {
- /*
+ /*
* Reserve 2 bytes at the head of the buffer to land the IP header
* on a long word boundary (According to the Network Driver section
* in the Linux KHG, this should help to increase performance.)
@@ -1271,10 +1270,10 @@ static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
/* ringptr->pdl points to the beginning of the PDL, i.e. the PDH */
/* Note: 1st Fragment is used for the 4 byte packet status
- * (receive header). Its PDL entries are set up by init_rxpdl. So
+ * (receive header). Its PDL entries are set up by init_rxpdl. So
* here we only have to set up the PDL fragment entries for the data
- * part. Those 4 bytes will be stored in the DMA memory region
- * directly before the PDL.
+ * part. Those 4 bytes will be stored in the DMA memory region
+ * directly before the PDL.
*/
#ifdef HP100_DEBUG_BM
printk("hp100: %s: build_rx_pdl: PDH@0x%x, skb->data (len %d) at 0x%x\n",
@@ -1286,7 +1285,7 @@ static int hp100_build_rx_pdl(hp100_ring_t * ringptr,
/* Conversion to new PCI API : map skbuf data to PCI bus.
* Doc says it's OK for EISA as well - Jean II */
ringptr->pdl[0] = 0x00020000; /* Write PDH */
- ringptr->pdl[3] = pdl_map_data(netdev_priv(dev),
+ ringptr->pdl[3] = pdl_map_data(netdev_priv(dev),
ringptr->skb->data);
ringptr->pdl[4] = MAX_ETHER_SIZE; /* Length of Data */
@@ -1407,7 +1406,7 @@ static void hp100_BM_shutdown(struct net_device *dev)
}
} else { /* Shasta or Rainier Shutdown/Reset */
/* To ensure all bus master inloading activity has ceased,
- * wait for no Rx PDAs or no Rx packets on card.
+ * wait for no Rx PDAs or no Rx packets on card.
*/
hp100_page(PERFORMANCE);
/* 100 ms timeout */
@@ -1423,7 +1422,7 @@ static void hp100_BM_shutdown(struct net_device *dev)
/* To ensure all bus master outloading activity has ceased,
* wait until the Tx PDA count goes to zero or no more Tx space
- * available in the Tx region of the card.
+ * available in the Tx region of the card.
*/
/* 100 ms timeout */
for (time = 0; time < 10000; time++) {
@@ -1462,7 +1461,7 @@ static int hp100_check_lan(struct net_device *dev)
return 0;
}
-/*
+/*
* transmit functions
*/
@@ -1486,7 +1485,7 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
if (skb->len <= 0)
return 0;
-
+
if (lp->chip == HP100_CHIPID_SHASTA && skb_padto(skb, ETH_ZLEN))
return 0;
@@ -1576,14 +1575,14 @@ static int hp100_start_xmit_bm(struct sk_buff *skb, struct net_device *dev)
return 0;
}
-
+
/* clean_txring checks if packets have been sent by the card by reading
* the TX_PDL register from the performance page and comparing it to the
* number of commited packets. It then frees the skb's of the packets that
* obviously have been sent to the network.
*
- * Needs the PERFORMANCE page selected.
+ * Needs the PERFORMANCE page selected.
*/
static void hp100_clean_txring(struct net_device *dev)
{
@@ -1744,15 +1743,15 @@ static int hp100_start_xmit(struct sk_buff *skb, struct net_device *dev)
return 0;
}
-
+
/*
* Receive Function (Non-Busmaster mode)
- * Called when an "Receive Packet" interrupt occurs, i.e. the receive
+ * Called when an "Receive Packet" interrupt occurs, i.e. the receive
* packet counter is non-zero.
* For non-busmaster, this function does the whole work of transfering
* the packet to the host memory and then up to higher layers via skb
- * and netif_rx.
+ * and netif_rx.
*/
static void hp100_rx(struct net_device *dev)
@@ -1855,7 +1854,7 @@ static void hp100_rx(struct net_device *dev)
#endif
}
-/*
+/*
* Receive Function for Busmaster Mode
*/
static void hp100_rx_bm(struct net_device *dev)
@@ -1876,7 +1875,7 @@ static void hp100_rx_bm(struct net_device *dev)
printk("hp100: %s: rx_bm called although no PDLs were committed to adapter?\n", dev->name);
return;
} else
- /* RX_PKT_CNT states how many PDLs are currently formatted and available to
+ /* RX_PKT_CNT states how many PDLs are currently formatted and available to
* the cards BM engine */
if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) {
printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n",
@@ -1889,7 +1888,7 @@ static void hp100_rx_bm(struct net_device *dev)
while ((lp->rxrcommit > hp100_inb(RX_PDL))) {
/*
* The packet was received into the pdl pointed to by lp->rxrhead (
- * the oldest pdl in the ring
+ * the oldest pdl in the ring
*/
/* First we get the header, which contains information about the */
@@ -2044,7 +2043,7 @@ static void hp100_clear_stats(struct hp100_private *lp, int ioaddr)
hp100_page(PERFORMANCE);
spin_unlock_irqrestore(&lp->lock, flags);
}
-
+
/*
* multicast setup
@@ -2221,9 +2220,9 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* We're only interested in those interrupts we really enabled. */
/* val &= hp100_inw( IRQ_MASK ); */
- /*
- * RX_PDL_FILL_COMPL is set whenever a RX_PDL has been executed. A RX_PDL
- * is considered executed whenever the RX_PDL data structure is no longer
+ /*
+ * RX_PDL_FILL_COMPL is set whenever a RX_PDL has been executed. A RX_PDL
+ * is considered executed whenever the RX_PDL data structure is no longer
* needed.
*/
if (val & HP100_RX_PDL_FILL_COMPL) {
@@ -2234,7 +2233,7 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
}
}
- /*
+ /*
* The RX_PACKET interrupt is set, when the receive packet counter is
* non zero. We use this interrupt for receiving in slave mode. In
* busmaster mode, we use it to make sure we did not miss any rx_pdl_fill
@@ -2260,10 +2259,10 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
hp100_outw(val, IRQ_STATUS);
/*
- * RX_ERROR is set when a packet is dropped due to no memory resources on
- * the card or when a RCV_ERR occurs.
- * TX_ERROR is set when a TX_ABORT condition occurs in the MAC->exists
- * only in the 802.3 MAC and happens when 16 collisions occur during a TX
+ * RX_ERROR is set when a packet is dropped due to no memory resources on
+ * the card or when a RCV_ERR occurs.
+ * TX_ERROR is set when a TX_ABORT condition occurs in the MAC->exists
+ * only in the 802.3 MAC and happens when 16 collisions occur during a TX
*/
if (val & (HP100_TX_ERROR | HP100_RX_ERROR)) {
#ifdef HP100_DEBUG_IRQ
@@ -2276,20 +2275,20 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id, struct pt_regs *regs)
}
}
- /*
- * RX_PDA_ZERO is set when the PDA count goes from non-zero to zero.
+ /*
+ * RX_PDA_ZERO is set when the PDA count goes from non-zero to zero.
*/
if ((lp->mode == 1) && (val & (HP100_RX_PDA_ZERO)))
hp100_rxfill(dev);
- /*
- * HP100_TX_COMPLETE interrupt occurs when packet transmitted on wire
- * is completed
+ /*
+ * HP100_TX_COMPLETE interrupt occurs when packet transmitted on wire
+ * is completed
*/
if ((lp->mode == 1) && (val & (HP100_TX_COMPLETE)))
hp100_clean_txring(dev);
- /*
+ /*
* MISC_ERROR is set when either the LAN link goes down or a detected
* bus error occurs.
*/
@@ -2472,12 +2471,12 @@ static int hp100_sense_lan(struct net_device *dev)
/* Those cards don't have a 100 Mbit connector */
if ( !strcmp(lp->id, "HWP1920") ||
- (lp->pci_dev &&
- lp->pci_dev->vendor == PCI_VENDOR_ID &&
+ (lp->pci_dev &&
+ lp->pci_dev->vendor == PCI_VENDOR_ID &&
(lp->pci_dev->device == PCI_DEVICE_ID_HP_J2970A ||
lp->pci_dev->device == PCI_DEVICE_ID_HP_J2973A)))
return HP100_LAN_ERR;
-
+
if (val_VG & HP100_LINK_CABLE_ST) /* Can hear the HUBs tone. */
return HP100_LAN_100;
return HP100_LAN_ERR;
@@ -2823,8 +2822,8 @@ static void cleanup_dev(struct net_device *d)
release_region(d->base_addr, HP100_REGION_SIZE);
if (p->mode == 1) /* busmaster */
- pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f,
- p->page_vaddr_algn,
+ pci_free_consistent(p->pci_dev, MAX_RINGSIZE + 0x0f,
+ p->page_vaddr_algn,
virt_to_whatever(d, p->page_vaddr_algn));
if (p->mem_ptr_virt)
iounmap(p->mem_ptr_virt);
@@ -2850,7 +2849,7 @@ static int __init hp100_eisa_probe (struct device *gendev)
goto out1;
#ifdef HP100_DEBUG
- printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name,
+ printk("hp100: %s: EISA adapter found at 0x%x\n", dev->name,
dev->base_addr);
#endif
gendev->driver_data = dev;
@@ -2914,12 +2913,12 @@ static int __devinit hp100_pci_probe (struct pci_dev *pdev,
pci_command |= PCI_COMMAND_MASTER;
pci_write_config_word(pdev, PCI_COMMAND, pci_command);
}
-
+
ioaddr = pci_resource_start(pdev, 0);
err = hp100_probe1(dev, ioaddr, HP100_BUS_PCI, pdev);
- if (err)
+ if (err)
goto out1;
-
+
#ifdef HP100_DEBUG
printk("hp100: %s: PCI adapter found at 0x%x\n", dev->name, ioaddr);
#endif
@@ -3004,7 +3003,7 @@ static int __init hp100_isa_init(void)
return cards > 0 ? 0 : -ENODEV;
}
-static void __exit hp100_isa_cleanup(void)
+static void __exit hp100_isa_cleanup(void)
{
int i;
@@ -3028,12 +3027,12 @@ static int __init hp100_module_init(void)
goto out;
#ifdef CONFIG_EISA
err = eisa_driver_register(&hp100_eisa_driver);
- if (err && err != -ENODEV)
+ if (err && err != -ENODEV)
goto out2;
#endif
#ifdef CONFIG_PCI
err = pci_module_init(&hp100_pci_driver);
- if (err && err != -ENODEV)
+ if (err && err != -ENODEV)
goto out3;
#endif
out: