diff options
Diffstat (limited to 'drivers/net/hp100.c')
| -rw-r--r-- | drivers/net/hp100.c | 28 |
1 files changed, 14 insertions, 14 deletions
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c index 8e2c4601b5f..c52a1df5d92 100644 --- a/drivers/net/hp100.c +++ b/drivers/net/hp100.c @@ -180,22 +180,22 @@ struct hp100_private { u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */ u_long whatever_offset; /* Offset to bus/phys/dma address */ - int rxrcommit; /* # Rx PDLs commited to adapter */ - int txrcommit; /* # Tx PDLs commited to adapter */ + int rxrcommit; /* # Rx PDLs committed to adapter */ + int txrcommit; /* # Tx PDLs committed to adapter */ }; /* * variables */ #ifdef CONFIG_ISA -static const char *hp100_isa_tbl[] = { +static const char *const hp100_isa_tbl[] __devinitconst = { "HWPF150", /* HP J2573 rev A */ "HWP1950", /* HP J2573 */ }; #endif #ifdef CONFIG_EISA -static struct eisa_device_id hp100_eisa_tbl[] = { +static const struct eisa_device_id hp100_eisa_tbl[] __devinitconst = { { "HWPF180" }, /* HP J2577 rev A */ { "HWP1920" }, /* HP 27248B */ { "HWP1940" }, /* HP J2577 */ @@ -336,7 +336,7 @@ static __devinit const char *hp100_read_id(int ioaddr) } #ifdef CONFIG_ISA -static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr) +static __devinit int hp100_isa_probe1(struct net_device *dev, int ioaddr) { const char *sig; int i; @@ -372,7 +372,7 @@ static __init int hp100_isa_probe1(struct net_device *dev, int ioaddr) * EISA and PCI are handled by device infrastructure. */ -static int __init hp100_isa_probe(struct net_device *dev, int addr) +static int __devinit hp100_isa_probe(struct net_device *dev, int addr) { int err = -ENODEV; @@ -396,7 +396,7 @@ static int __init hp100_isa_probe(struct net_device *dev, int addr) #endif /* CONFIG_ISA */ #if !defined(MODULE) && defined(CONFIG_ISA) -struct net_device * __init hp100_probe(int unit) +struct net_device * __devinit hp100_probe(int unit) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); int err; @@ -716,7 +716,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr, * implemented/tested only with the lassen chip anyway... */ if (lp->mode == 1) { /* busmaster */ dma_addr_t page_baddr; - /* Get physically continous memory for TX & RX PDLs */ + /* Get physically continuous memory for TX & RX PDLs */ /* Conversion to new PCI API : * Pages are always aligned and zeroed, no need to it ourself. * Doc says should be OK for EISA bus as well - Jean II */ @@ -1596,7 +1596,7 @@ drop: /* clean_txring checks if packets have been sent by the card by reading * the TX_PDL register from the performance page and comparing it to the - * number of commited packets. It then frees the skb's of the packets that + * number of committed packets. It then frees the skb's of the packets that * obviously have been sent to the network. * * Needs the PERFORMANCE page selected. @@ -1617,7 +1617,7 @@ static void hp100_clean_txring(struct net_device *dev) #ifdef HP100_DEBUG if (donecount > MAX_TX_PDL) - printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name); + printk("hp100: %s: Warning: More PDLs transmitted than committed to card???\n", dev->name); #endif for (; 0 != donecount; donecount--) { @@ -1765,7 +1765,7 @@ drop: * Receive Function (Non-Busmaster mode) * Called when an "Receive Packet" interrupt occurs, i.e. the receive * packet counter is non-zero. - * For non-busmaster, this function does the whole work of transfering + * For non-busmaster, this function does the whole work of transferring * the packet to the host memory and then up to higher layers via skb * and netif_rx. */ @@ -1892,7 +1892,7 @@ static void hp100_rx_bm(struct net_device *dev) /* RX_PKT_CNT states how many PDLs are currently formatted and available to * the cards BM engine */ if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) { - printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n", + printk("hp100: %s: More packets received than committed? RX_PKT_CNT=0x%x, commit=0x%x\n", dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff, lp->rxrcommit); return; @@ -2256,7 +2256,7 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id) if (lp->mode != 1) /* non busmaster */ hp100_rx(dev); else if (!(val & HP100_RX_PDL_FILL_COMPL)) { - /* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt? */ + /* Shouldn't happen - maybe we missed a RX_PDL_FILL Interrupt? */ hp100_rx_bm(dev); } } @@ -2843,7 +2843,7 @@ static void cleanup_dev(struct net_device *d) } #ifdef CONFIG_EISA -static int __init hp100_eisa_probe (struct device *gendev) +static int __devinit hp100_eisa_probe (struct device *gendev) { struct net_device *dev = alloc_etherdev(sizeof(struct hp100_private)); struct eisa_device *edev = to_eisa_device(gendev); |