diff options
Diffstat (limited to 'drivers/net/igb/e1000_82575.c')
-rw-r--r-- | drivers/net/igb/e1000_82575.c | 35 |
1 files changed, 11 insertions, 24 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c index 4a32bed77c7..86438b59fa2 100644 --- a/drivers/net/igb/e1000_82575.c +++ b/drivers/net/igb/e1000_82575.c @@ -104,6 +104,12 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) case E1000_DEV_ID_82580_COPPER_DUAL: mac->type = e1000_82580; break; + case E1000_DEV_ID_I350_COPPER: + case E1000_DEV_ID_I350_FIBER: + case E1000_DEV_ID_I350_SERDES: + case E1000_DEV_ID_I350_SGMII: + mac->type = e1000_i350; + break; default: return -E1000_ERR_MAC_INIT; break; @@ -153,8 +159,10 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) mac->rar_entry_count = E1000_RAR_ENTRIES_82576; if (mac->type == e1000_82580) mac->rar_entry_count = E1000_RAR_ENTRIES_82580; + if (mac->type == e1000_i350) + mac->rar_entry_count = E1000_RAR_ENTRIES_I350; /* reset */ - if (mac->type == e1000_82580) + if (mac->type >= e1000_82580) mac->ops.reset_hw = igb_reset_hw_82580; else mac->ops.reset_hw = igb_reset_hw_82575; @@ -225,7 +233,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) phy->ops.reset = igb_phy_hw_reset_sgmii_82575; phy->ops.read_reg = igb_read_phy_reg_sgmii_82575; phy->ops.write_reg = igb_write_phy_reg_sgmii_82575; - } else if (hw->mac.type == e1000_82580) { + } else if (hw->mac.type >= e1000_82580) { phy->ops.reset = igb_phy_hw_reset; phy->ops.read_reg = igb_read_phy_reg_82580; phy->ops.write_reg = igb_write_phy_reg_82580; @@ -261,6 +269,7 @@ static s32 igb_get_invariants_82575(struct e1000_hw *hw) phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state; break; case I82580_I_PHY_ID: + case I350_I_PHY_ID: phy->type = e1000_phy_82580; phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580; phy->ops.get_cable_length = igb_get_cable_length_82580; @@ -1205,8 +1214,6 @@ void igb_power_down_phy_copper_82575(struct e1000_hw *hw) /* If the management interface is not enabled, then power down */ if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw))) igb_power_down_phy_copper(hw); - - return; } /** @@ -1445,7 +1452,6 @@ void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable) **/ static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) { - u32 mdicnfg = 0; s32 ret_val; @@ -1453,15 +1459,6 @@ static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data) if (ret_val) goto out; - /* - * We config the phy address in MDICNFG register now. Same bits - * as before. The values in MDIC can be written but will be - * ignored. This allows us to call the old function after - * configuring the PHY address in the new register - */ - mdicnfg = (hw->phy.addr << E1000_MDIC_PHY_SHIFT); - wr32(E1000_MDICNFG, mdicnfg); - ret_val = igb_read_phy_reg_mdic(hw, offset, data); hw->phy.ops.release(hw); @@ -1480,7 +1477,6 @@ out: **/ static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) { - u32 mdicnfg = 0; s32 ret_val; @@ -1488,15 +1484,6 @@ static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data) if (ret_val) goto out; - /* - * We config the phy address in MDICNFG register now. Same bits - * as before. The values in MDIC can be written but will be - * ignored. This allows us to call the old function after - * configuring the PHY address in the new register - */ - mdicnfg = (hw->phy.addr << E1000_MDIC_PHY_SHIFT); - wr32(E1000_MDICNFG, mdicnfg); - ret_val = igb_write_phy_reg_mdic(hw, offset, data); hw->phy.ops.release(hw); |