summaryrefslogtreecommitdiffstats
path: root/drivers/net/igb/igb_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/igb/igb_main.c')
-rw-r--r--drivers/net/igb/igb_main.c170
1 files changed, 135 insertions, 35 deletions
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 14363260612..ba043c4e1ca 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -51,7 +51,7 @@ char igb_driver_name[] = "igb";
char igb_driver_version[] = DRV_VERSION;
static const char igb_driver_string[] =
"Intel(R) Gigabit Ethernet Network Driver";
-static const char igb_copyright[] = "Copyright (c) 2007 Intel Corporation.";
+static const char igb_copyright[] = "Copyright (c) 2008 Intel Corporation.";
static const struct e1000_info *igb_info_tbl[] = {
@@ -59,6 +59,10 @@ static const struct e1000_info *igb_info_tbl[] = {
};
static struct pci_device_id igb_pci_tbl[] = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
@@ -268,6 +272,10 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue,
{
u32 msixbm = 0;
struct e1000_hw *hw = &adapter->hw;
+ u32 ivar, index;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
/* The 82575 assigns vectors using a bitmask, which matches the
bitmask for the EICR/EIMS/EIMC registers. To assign one
or more queues to a vector, we write the appropriate bits
@@ -282,6 +290,47 @@ static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue,
E1000_EICR_TX_QUEUE0 << tx_queue;
}
array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+ break;
+ case e1000_82576:
+ /* Kawela uses a table-based method for assigning vectors.
+ Each queue has a single entry in the table to which we write
+ a vector number along with a "valid" bit. Sadly, the layout
+ of the table is somewhat counterintuitive. */
+ if (rx_queue > IGB_N0_QUEUE) {
+ index = (rx_queue & 0x7);
+ ivar = array_rd32(E1000_IVAR0, index);
+ if (rx_queue < 8) {
+ /* vector goes into low byte of register */
+ ivar = ivar & 0xFFFFFF00;
+ ivar |= msix_vector | E1000_IVAR_VALID;
+ } else {
+ /* vector goes into third byte of register */
+ ivar = ivar & 0xFF00FFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
+ }
+ adapter->rx_ring[rx_queue].eims_value= 1 << msix_vector;
+ array_wr32(E1000_IVAR0, index, ivar);
+ }
+ if (tx_queue > IGB_N0_QUEUE) {
+ index = (tx_queue & 0x7);
+ ivar = array_rd32(E1000_IVAR0, index);
+ if (tx_queue < 8) {
+ /* vector goes into second byte of register */
+ ivar = ivar & 0xFFFF00FF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
+ } else {
+ /* vector goes into high byte of register */
+ ivar = ivar & 0x00FFFFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
+ }
+ adapter->tx_ring[tx_queue].eims_value= 1 << msix_vector;
+ array_wr32(E1000_IVAR0, index, ivar);
+ }
+ break;
+ default:
+ BUG();
+ break;
+ }
}
/**
@@ -297,6 +346,12 @@ static void igb_configure_msix(struct igb_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
adapter->eims_enable_mask = 0;
+ if (hw->mac.type == e1000_82576)
+ /* Turn on MSI-X capability first, or our settings
+ * won't stick. And it will take days to debug. */
+ wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
+ E1000_GPIE_PBA | E1000_GPIE_EIAME |
+ E1000_GPIE_NSICR);
for (i = 0; i < adapter->num_tx_queues; i++) {
struct igb_ring *tx_ring = &adapter->tx_ring[i];
@@ -322,6 +377,8 @@ static void igb_configure_msix(struct igb_adapter *adapter)
/* set vector for other causes, i.e. link changes */
+ switch (hw->mac.type) {
+ case e1000_82575:
array_wr32(E1000_MSIXBM(0), vector++,
E1000_EIMS_OTHER);
@@ -337,6 +394,19 @@ static void igb_configure_msix(struct igb_adapter *adapter)
adapter->eims_enable_mask |= E1000_EIMS_OTHER;
adapter->eims_other = E1000_EIMS_OTHER;
+ break;
+
+ case e1000_82576:
+ tmp = (vector++ | E1000_IVAR_VALID) << 8;
+ wr32(E1000_IVAR_MISC, tmp);
+
+ adapter->eims_enable_mask = (1 << (vector)) - 1;
+ adapter->eims_other = 1 << (vector - 1);
+ break;
+ default:
+ /* do nothing, since nothing else supports MSI-X */
+ break;
+ } /* switch (hw->mac.type) */
wrfl();
}
@@ -474,8 +544,17 @@ static int igb_request_irq(struct igb_adapter *adapter)
adapter->num_rx_queues = 1;
igb_alloc_queues(adapter);
} else {
- wr32(E1000_MSIXBM(0), (E1000_EICR_RX_QUEUE0 |
- E1000_EIMS_OTHER));
+ switch (hw->mac.type) {
+ case e1000_82575:
+ wr32(E1000_MSIXBM(0),
+ (E1000_EICR_RX_QUEUE0 | E1000_EIMS_OTHER));
+ break;
+ case e1000_82576:
+ wr32(E1000_IVAR0, E1000_IVAR_VALID);
+ break;
+ default:
+ break;
+ }
}
if (adapter->msi_enabled) {
@@ -770,16 +849,23 @@ void igb_reinit_locked(struct igb_adapter *adapter)
void igb_reset(struct igb_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- struct e1000_fc_info *fc = &adapter->hw.fc;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_fc_info *fc = &hw->fc;
u32 pba = 0, tx_space, min_tx_space, min_rx_space;
u16 hwm;
/* Repartition Pba for greater than 9k mtu
* To take effect CTRL.RST is required.
*/
+ if (mac->type != e1000_82576) {
pba = E1000_PBA_34K;
+ }
+ else {
+ pba = E1000_PBA_64K;
+ }
- if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ (mac->type < e1000_82576)) {
/* adjust PBA for jumbo frames */
wr32(E1000_PBA, pba);
@@ -818,8 +904,8 @@ void igb_reset(struct igb_adapter *adapter)
if (pba < min_rx_space)
pba = min_rx_space;
}
+ wr32(E1000_PBA, pba);
}
- wr32(E1000_PBA, pba);
/* flow control settings */
/* The high water mark must be low enough to fit one full frame
@@ -828,10 +914,15 @@ void igb_reset(struct igb_adapter *adapter)
* - 90% of the Rx FIFO size, or
* - the full Rx FIFO size minus one full frame */
hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - adapter->max_frame_size));
+ ((pba << 10) - 2 * adapter->max_frame_size));
- fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
- fc->low_water = fc->high_water - 8;
+ if (mac->type < e1000_82576) {
+ fc->high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ fc->low_water = fc->high_water - 8;
+ } else {
+ fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */
+ fc->low_water = fc->high_water - 16;
+ }
fc->pause_time = 0xFFFF;
fc->send_xon = 1;
fc->type = fc->original_type;
@@ -1118,9 +1209,12 @@ static int __devinit igb_probe(struct pci_dev *pdev,
* lan on a particular port */
switch (pdev->device) {
case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER:
adapter->eeprom_wol = 0;
break;
case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
/* Wake events only supported on port A for dual fiber
* regardless of eeprom setting */
if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
@@ -1801,7 +1895,10 @@ static void igb_configure_rx(struct igb_adapter *adapter)
get_random_bytes(&random[0], 40);
- shift = 6;
+ if (hw->mac.type >= e1000_82576)
+ shift = 0;
+ else
+ shift = 6;
for (j = 0; j < (32 * 4); j++) {
reta.bytes[j & 3] =
(j % adapter->num_rx_queues) << shift;
@@ -2127,7 +2224,7 @@ static void igb_set_multi(struct net_device *netdev)
if (!netdev->mc_count) {
/* nothing to program, so clear mc list */
- igb_update_mc_addr_list(hw, NULL, 0, 1,
+ igb_update_mc_addr_list_82575(hw, NULL, 0, 1,
mac->rar_entry_count);
return;
}
@@ -2145,7 +2242,8 @@ static void igb_set_multi(struct net_device *netdev)
memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
mc_ptr = mc_ptr->next;
}
- igb_update_mc_addr_list(hw, mta_list, i, 1, mac->rar_entry_count);
+ igb_update_mc_addr_list_82575(hw, mta_list, i, 1,
+ mac->rar_entry_count);
kfree(mta_list);
}
@@ -3211,8 +3309,14 @@ static void igb_update_rx_dca(struct igb_ring *rx_ring)
if (rx_ring->cpu != cpu) {
dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
- dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
- dca_rxctrl |= dca_get_tag(cpu);
+ if (hw->mac.type == e1000_82576) {
+ dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
+ dca_rxctrl |= dca_get_tag(cpu) <<
+ E1000_DCA_RXCTRL_CPUID_SHIFT;
+ } else {
+ dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
+ dca_rxctrl |= dca_get_tag(cpu);
+ }
dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
@@ -3232,8 +3336,14 @@ static void igb_update_tx_dca(struct igb_ring *tx_ring)
if (tx_ring->cpu != cpu) {
dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
- dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
- dca_txctrl |= dca_get_tag(cpu);
+ if (hw->mac.type == e1000_82576) {
+ dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
+ dca_txctrl |= dca_get_tag(cpu) <<
+ E1000_DCA_TXCTRL_CPUID_SHIFT;
+ } else {
+ dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
+ dca_txctrl |= dca_get_tag(cpu);
+ }
dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
tx_ring->cpu = cpu;
@@ -3572,7 +3682,7 @@ done_cleaning:
/* detected Tx unit hang */
dev_err(&adapter->pdev->dev,
"Detected Tx Unit Hang\n"
- " Tx Queue <%lu>\n"
+ " Tx Queue <%d>\n"
" TDH <%x>\n"
" TDT <%x>\n"
" next_to_use <%x>\n"
@@ -3582,8 +3692,7 @@ done_cleaning:
" time_stamp <%lx>\n"
" jiffies <%lx>\n"
" desc.status <%x>\n",
- (unsigned long)((tx_ring - adapter->tx_ring) /
- sizeof(struct igb_ring)),
+ tx_ring->queue_index,
readl(adapter->hw.hw_addr + tx_ring->head),
readl(adapter->hw.hw_addr + tx_ring->tail),
tx_ring->next_to_use,
@@ -4098,7 +4207,7 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
struct net_device *netdev = pci_get_drvdata(pdev);
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
- u32 ctrl, ctrl_ext, rctl, status;
+ u32 ctrl, rctl, status;
u32 wufc = adapter->wol;
#ifdef CONFIG_PM
int retval = 0;
@@ -4141,33 +4250,24 @@ static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
ctrl |= E1000_CTRL_ADVD3WUC;
wr32(E1000_CTRL, ctrl);
- if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
- adapter->hw.phy.media_type ==
- e1000_media_type_internal_serdes) {
- /* keep the laser running in D3 */
- ctrl_ext = rd32(E1000_CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
- wr32(E1000_CTRL_EXT, ctrl_ext);
- }
-
/* Allow time for pending master requests to run */
igb_disable_pcie_master(&adapter->hw);
wr32(E1000_WUC, E1000_WUC_PME_EN);
wr32(E1000_WUFC, wufc);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
} else {
wr32(E1000_WUC, 0);
wr32(E1000_WUFC, 0);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
}
- /* make sure adapter isn't asleep if manageability is enabled */
- if (adapter->en_mng_pt) {
+ /* make sure adapter isn't asleep if manageability/wol is enabled */
+ if (wufc || adapter->en_mng_pt) {
pci_enable_wake(pdev, PCI_D3hot, 1);
pci_enable_wake(pdev, PCI_D3cold, 1);
+ } else {
+ igb_shutdown_fiber_serdes_link_82575(hw);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
}
/* Release control of h/w to f/w. If f/w is AMT enabled, this
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-28 20:51:45 +0000