diff options
Diffstat (limited to 'drivers/net/igb')
-rw-r--r-- | drivers/net/igb/e1000_82575.h | 1 | ||||
-rw-r--r-- | drivers/net/igb/e1000_defines.h | 1 | ||||
-rw-r--r-- | drivers/net/igb/e1000_regs.h | 40 | ||||
-rw-r--r-- | drivers/net/igb/igb.h | 4 | ||||
-rw-r--r-- | drivers/net/igb/igb_main.c | 266 |
5 files changed, 304 insertions, 8 deletions
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h index dd50237c8cb..e613d5a606d 100644 --- a/drivers/net/igb/e1000_82575.h +++ b/drivers/net/igb/e1000_82575.h @@ -116,6 +116,7 @@ union e1000_adv_tx_desc { }; /* Adv Transmit Descriptor Config Masks */ +#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp packet */ #define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ #define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ #define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h index 5342e231c1d..79168eeaaa0 100644 --- a/drivers/net/igb/e1000_defines.h +++ b/drivers/net/igb/e1000_defines.h @@ -104,6 +104,7 @@ #define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define E1000_RXD_STAT_TS 0x10000 /* Pkt was time stamped */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h index 64d95cd71f2..1fb19ca081c 100644 --- a/drivers/net/igb/e1000_regs.h +++ b/drivers/net/igb/e1000_regs.h @@ -78,9 +78,37 @@ /* IEEE 1588 TIMESYNCH */ #define E1000_TSYNCTXCTL 0x0B614 +#define E1000_TSYNCTXCTL_VALID (1<<0) +#define E1000_TSYNCTXCTL_ENABLED (1<<4) #define E1000_TSYNCRXCTL 0x0B620 +#define E1000_TSYNCRXCTL_VALID (1<<0) +#define E1000_TSYNCRXCTL_ENABLED (1<<4) +enum { + E1000_TSYNCRXCTL_TYPE_L2_V2 = 0, + E1000_TSYNCRXCTL_TYPE_L4_V1 = (1<<1), + E1000_TSYNCRXCTL_TYPE_L2_L4_V2 = (1<<2), + E1000_TSYNCRXCTL_TYPE_ALL = (1<<3), + E1000_TSYNCRXCTL_TYPE_EVENT_V2 = (1<<3) | (1<<1), +}; #define E1000_TSYNCRXCFG 0x05F50 +enum { + E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE = 0<<0, + E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE = 1<<0, + E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE = 2<<0, + E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE = 3<<0, + E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE = 4<<0, + E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE = 0<<8, + E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE = 1<<8, + E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE = 2<<8, + E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE = 3<<8, + E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE = 8<<8, + E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE = 9<<8, + E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE = 0xA<<8, + E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE = 0xB<<8, + E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE = 0xC<<8, + E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE = 0xD<<8, +}; #define E1000_SYSTIML 0x0B600 #define E1000_SYSTIMH 0x0B604 #define E1000_TIMINCA 0x0B608 @@ -103,6 +131,18 @@ #define E1000_ETQF6 0x05CC8 #define E1000_ETQF7 0x05CCC +/* Filtering Registers */ +#define E1000_SAQF(_n) (0x5980 + 4 * (_n)) +#define E1000_DAQF(_n) (0x59A0 + 4 * (_n)) +#define E1000_SPQF(_n) (0x59C0 + 4 * (_n)) +#define E1000_FTQF(_n) (0x59E0 + 4 * (_n)) +#define E1000_SAQF0 E1000_SAQF(0) +#define E1000_DAQF0 E1000_DAQF(0) +#define E1000_SPQF0 E1000_SPQF(0) +#define E1000_FTQF0 E1000_FTQF(0) +#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */ +#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */ + /* Split and Replication RX Control - RW */ /* * Convenience macros diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h index 797a9fe107a..bb8c35cec1a 100644 --- a/drivers/net/igb/igb.h +++ b/drivers/net/igb/igb.h @@ -35,6 +35,8 @@ #include "e1000_82575.h" #include <linux/clocksource.h> +#include <linux/timecompare.h> +#include <linux/net_tstamp.h> struct igb_adapter; @@ -255,6 +257,8 @@ struct igb_adapter { struct net_device_stats net_stats; struct cyclecounter cycles; struct timecounter clock; + struct timecompare compare; + struct hwtstamp_config hwtstamp_config; /* structs defined in e1000_hw.h */ struct e1000_hw hw; diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 90090bb2604..f9d576bfef9 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -250,7 +250,8 @@ static char *igb_get_time_str(struct igb_adapter *adapter, delta = timespec_sub(nic, sys); sprintf(buffer, - "NIC %ld.%09lus, SYS %ld.%09lus, NIC-SYS %lds + %09luns", + "HW %llu, NIC %ld.%09lus, SYS %ld.%09lus, NIC-SYS %lds + %09luns", + hw, (long)nic.tv_sec, nic.tv_nsec, (long)sys.tv_sec, sys.tv_nsec, (long)delta.tv_sec, delta.tv_nsec); @@ -1400,6 +1401,18 @@ static int __devinit igb_probe(struct pci_dev *pdev, &adapter->cycles, ktime_to_ns(ktime_get_real())); + /* + * Synchronize our NIC clock against system wall clock. NIC + * time stamp reading requires ~3us per sample, each sample + * was pretty stable even under load => only require 10 + * samples for each offset comparison. + */ + memset(&adapter->compare, 0, sizeof(adapter->compare)); + adapter->compare.source = &adapter->clock; + adapter->compare.target = ktime_get_real; + adapter->compare.num_samples = 10; + timecompare_update(&adapter->compare, 0); + #ifdef DEBUG { char buffer[160]; @@ -2748,6 +2761,7 @@ set_itr_now: #define IGB_TX_FLAGS_VLAN 0x00000002 #define IGB_TX_FLAGS_TSO 0x00000004 #define IGB_TX_FLAGS_IPV4 0x00000008 +#define IGB_TX_FLAGS_TSTAMP 0x00000010 #define IGB_TX_FLAGS_VLAN_MASK 0xffff0000 #define IGB_TX_FLAGS_VLAN_SHIFT 16 @@ -2975,6 +2989,9 @@ static inline void igb_tx_queue_adv(struct igb_adapter *adapter, if (tx_flags & IGB_TX_FLAGS_VLAN) cmd_type_len |= E1000_ADVTXD_DCMD_VLE; + if (tx_flags & IGB_TX_FLAGS_TSTAMP) + cmd_type_len |= E1000_ADVTXD_MAC_TSTAMP; + if (tx_flags & IGB_TX_FLAGS_TSO) { cmd_type_len |= E1000_ADVTXD_DCMD_TSE; @@ -3065,6 +3082,7 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb, unsigned int tx_flags = 0; u8 hdr_len = 0; int tso = 0; + union skb_shared_tx *shtx; if (test_bit(__IGB_DOWN, &adapter->state)) { dev_kfree_skb_any(skb); @@ -3085,7 +3103,29 @@ static int igb_xmit_frame_ring_adv(struct sk_buff *skb, /* this is a hard error */ return NETDEV_TX_BUSY; } - skb_orphan(skb); + + /* + * TODO: check that there currently is no other packet with + * time stamping in the queue + * + * When doing time stamping, keep the connection to the socket + * a while longer: it is still needed by skb_hwtstamp_tx(), + * called either in igb_tx_hwtstamp() or by our caller when + * doing software time stamping. + */ + shtx = skb_tx(skb); + if (unlikely(shtx->hardware)) { + shtx->in_progress = 1; + tx_flags |= IGB_TX_FLAGS_TSTAMP; + } else if (likely(!shtx->software)) { + /* + * TODO: can this be solved in dev.c:dev_hard_start_xmit()? + * There are probably unmodified driver which do something + * like this and thus don't work in combination with + * SOF_TIMESTAMPING_TX_SOFTWARE. + */ + skb_orphan(skb); + } if (adapter->vlgrp && vlan_tx_tag_present(skb)) { tx_flags |= IGB_TX_FLAGS_VLAN; @@ -3744,6 +3784,43 @@ static int igb_clean_rx_ring_msix(struct napi_struct *napi, int budget) } /** + * igb_hwtstamp - utility function which checks for TX time stamp + * @adapter: board private structure + * @skb: packet that was just sent + * + * If we were asked to do hardware stamping and such a time stamp is + * available, then it must have been for this skb here because we only + * allow only one such packet into the queue. + */ +static void igb_tx_hwtstamp(struct igb_adapter *adapter, struct sk_buff *skb) +{ + union skb_shared_tx *shtx = skb_tx(skb); + struct e1000_hw *hw = &adapter->hw; + + if (unlikely(shtx->hardware)) { + u32 valid = rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID; + if (valid) { + u64 regval = rd32(E1000_TXSTMPL); + u64 ns; + struct skb_shared_hwtstamps shhwtstamps; + + memset(&shhwtstamps, 0, sizeof(shhwtstamps)); + regval |= (u64)rd32(E1000_TXSTMPH) << 32; + ns = timecounter_cyc2time(&adapter->clock, + regval); + timecompare_update(&adapter->compare, ns); + shhwtstamps.hwtstamp = ns_to_ktime(ns); + shhwtstamps.syststamp = + timecompare_transform(&adapter->compare, ns); + skb_tstamp_tx(skb, &shhwtstamps); + } + + /* delayed orphaning: skb_tstamp_tx() needs the socket */ + skb_orphan(skb); + } +} + +/** * igb_clean_tx_irq - Reclaim resources after transmit completes * @adapter: board private structure * returns true if ring is completely cleaned @@ -3781,6 +3858,8 @@ static bool igb_clean_tx_irq(struct igb_ring *tx_ring) skb->len; total_packets += segs; total_bytes += bytecount; + + igb_tx_hwtstamp(adapter, skb); } igb_unmap_and_free_tx_resource(adapter, buffer_info); @@ -3914,6 +3993,7 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, { struct igb_adapter *adapter = rx_ring->adapter; struct net_device *netdev = adapter->netdev; + struct e1000_hw *hw = &adapter->hw; struct pci_dev *pdev = adapter->pdev; union e1000_adv_rx_desc *rx_desc , *next_rxd; struct igb_buffer *buffer_info , *next_buffer; @@ -4006,6 +4086,47 @@ static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring, goto next_desc; } send_up: + /* + * If this bit is set, then the RX registers contain + * the time stamp. No other packet will be time + * stamped until we read these registers, so read the + * registers to make them available again. Because + * only one packet can be time stamped at a time, we + * know that the register values must belong to this + * one here and therefore we don't need to compare + * any of the additional attributes stored for it. + * + * If nothing went wrong, then it should have a + * skb_shared_tx that we can turn into a + * skb_shared_hwtstamps. + * + * TODO: can time stamping be triggered (thus locking + * the registers) without the packet reaching this point + * here? In that case RX time stamping would get stuck. + * + * TODO: in "time stamp all packets" mode this bit is + * not set. Need a global flag for this mode and then + * always read the registers. Cannot be done without + * a race condition. + */ + if (unlikely(staterr & E1000_RXD_STAT_TS)) { + u64 regval; + u64 ns; + struct skb_shared_hwtstamps *shhwtstamps = + skb_hwtstamps(skb); + + WARN(!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID), + "igb: no RX time stamp available for time stamped packet"); + regval = rd32(E1000_RXSTMPL); + regval |= (u64)rd32(E1000_RXSTMPH) << 32; + ns = timecounter_cyc2time(&adapter->clock, regval); + timecompare_update(&adapter->compare, ns); + memset(shhwtstamps, 0, sizeof(*shhwtstamps)); + shhwtstamps->hwtstamp = ns_to_ktime(ns); + shhwtstamps->syststamp = + timecompare_transform(&adapter->compare, ns); + } + if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) { dev_kfree_skb_irq(skb); goto next_desc; @@ -4188,13 +4309,33 @@ static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) * @ifreq: * @cmd: * - * Currently cannot enable any kind of hardware time stamping, but - * supports SIOCSHWTSTAMP in general. + * Outgoing time stamping can be enabled and disabled. Play nice and + * disable it when requested, although it shouldn't case any overhead + * when no packet needs it. At most one packet in the queue may be + * marked for time stamping, otherwise it would be impossible to tell + * for sure to which packet the hardware time stamp belongs. + * + * Incoming time stamping has to be configured via the hardware + * filters. Not all combinations are supported, in particular event + * type has to be specified. Matching the kind of event packet is + * not supported, with the exception of "all V2 events regardless of + * level 2 or 4". + * **/ static int igb_hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) { + struct igb_adapter *adapter = netdev_priv(netdev); + struct e1000_hw *hw = &adapter->hw; struct hwtstamp_config config; + u32 tsync_tx_ctl_bit = E1000_TSYNCTXCTL_ENABLED; + u32 tsync_rx_ctl_bit = E1000_TSYNCRXCTL_ENABLED; + u32 tsync_rx_ctl_type = 0; + u32 tsync_rx_cfg = 0; + int is_l4 = 0; + int is_l2 = 0; + short port = 319; /* PTP */ + u32 regval; if (copy_from_user(&config, ifr->ifr_data, sizeof(config))) return -EFAULT; @@ -4203,11 +4344,120 @@ static int igb_hwtstamp_ioctl(struct net_device *netdev, if (config.flags) return -EINVAL; - if (config.tx_type == HWTSTAMP_TX_OFF && - config.rx_filter == HWTSTAMP_FILTER_NONE) - return 0; + switch (config.tx_type) { + case HWTSTAMP_TX_OFF: + tsync_tx_ctl_bit = 0; + break; + case HWTSTAMP_TX_ON: + tsync_tx_ctl_bit = E1000_TSYNCTXCTL_ENABLED; + break; + default: + return -ERANGE; + } + + switch (config.rx_filter) { + case HWTSTAMP_FILTER_NONE: + tsync_rx_ctl_bit = 0; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_ALL: + /* + * register TSYNCRXCFG must be set, therefore it is not + * possible to time stamp both Sync and Delay_Req messages + * => fall back to time stamping all packets + */ + tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_ALL; + config.rx_filter = HWTSTAMP_FILTER_ALL; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L4_V1; + tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE; + is_l4 = 1; + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L4_V1; + tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE; + is_l4 = 1; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: + tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L2_L4_V2; + tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE; + is_l2 = 1; + is_l4 = 1; + config.rx_filter = HWTSTAMP_FILTER_SOME; + break; + case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: + case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: + tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L2_L4_V2; + tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE; + is_l2 = 1; + is_l4 = 1; + config.rx_filter = HWTSTAMP_FILTER_SOME; + break; + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_SYNC: + case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: + tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_EVENT_V2; + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; + is_l2 = 1; + break; + default: + return -ERANGE; + } + + /* enable/disable TX */ + regval = rd32(E1000_TSYNCTXCTL); + regval = (regval & ~E1000_TSYNCTXCTL_ENABLED) | tsync_tx_ctl_bit; + wr32(E1000_TSYNCTXCTL, regval); + + /* enable/disable RX, define which PTP packets are time stamped */ + regval = rd32(E1000_TSYNCRXCTL); + regval = (regval & ~E1000_TSYNCRXCTL_ENABLED) | tsync_rx_ctl_bit; + regval = (regval & ~0xE) | tsync_rx_ctl_type; + wr32(E1000_TSYNCRXCTL, regval); + wr32(E1000_TSYNCRXCFG, tsync_rx_cfg); + + /* + * Ethertype Filter Queue Filter[0][15:0] = 0x88F7 + * (Ethertype to filter on) + * Ethertype Filter Queue Filter[0][26] = 0x1 (Enable filter) + * Ethertype Filter Queue Filter[0][30] = 0x1 (Enable Timestamping) + */ + wr32(E1000_ETQF0, is_l2 ? 0x440088f7 : 0); + + /* L4 Queue Filter[0]: only filter by source and destination port */ + wr32(E1000_SPQF0, htons(port)); + wr32(E1000_IMIREXT(0), is_l4 ? + ((1<<12) | (1<<19) /* bypass size and control flags */) : 0); + wr32(E1000_IMIR(0), is_l4 ? + (htons(port) + | (0<<16) /* immediate interrupt disabled */ + | 0 /* (1<<17) bit cleared: do not bypass + destination port check */) + : 0); + wr32(E1000_FTQF0, is_l4 ? + (0x11 /* UDP */ + | (1<<15) /* VF not compared */ + | (1<<27) /* Enable Timestamping */ + | (7<<28) /* only source port filter enabled, + source/target address and protocol + masked */) + : ((1<<15) | (15<<28) /* all mask bits set = filter not + enabled */)); + + wrfl(); + + adapter->hwtstamp_config = config; + + /* clear TX/RX time stamp registers, just to be sure */ + regval = rd32(E1000_TXSTMPH); + regval = rd32(E1000_RXSTMPH); - return -ERANGE; + return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ? + -EFAULT : 0; } /** |