diff options
Diffstat (limited to 'drivers/net/irda/Kconfig')
| -rw-r--r-- | drivers/net/irda/Kconfig | 141 |
1 files changed, 0 insertions, 141 deletions
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 65806956728..ce816ba9c40 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -190,147 +190,6 @@ config KS959_DONGLE To compile it as a module, choose M here: the module will be called ks959-sir. -comment "Old SIR device drivers" - -config IRPORT_SIR - tristate "IrPORT (IrDA serial driver)" - depends on IRDA && BROKEN_ON_SMP - ---help--- - Say Y here if you want to build support for the IrPORT IrDA device - driver. To compile it as a module, choose M here: the module will be - called irport. IrPORT can be used instead of IrTTY and sometimes - this can be better. One example is if your IrDA port does not - have echo-canceling, which will work OK with IrPORT since this - driver is working in half-duplex mode only. You don't need to use - irattach with IrPORT, but you just insert it the same way as FIR - drivers (insmod irport io=0x3e8 irq=11). Notice that IrPORT is a - SIR device driver which means that speed is limited to 115200 bps. - - If unsure, say Y. - -comment "Old Serial dongle support" - -config DONGLE_OLD - bool "Old Serial dongle support" - depends on IRPORT_SIR && BROKEN_ON_SMP - help - Say Y here if you have an infrared device that connects to your - computer's serial port. These devices are called dongles. Then say Y - or M to the driver for your particular dongle below. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about serial dongles. - -config ESI_DONGLE_OLD - tristate "ESI JetEye PC dongle" - depends on DONGLE_OLD && IRDA - help - Say Y here if you want to build support for the Extended Systems - JetEye PC dongle. To compile it as a module, choose M here. The ESI - dongle attaches to the normal 9-pin serial port connector, and can - currently only be used by IrTTY. To activate support for ESI - dongles you will have to start irattach like this: - "irattach -d esi". - -config ACTISYS_DONGLE_OLD - tristate "ACTiSYS IR-220L and IR220L+ dongle" - depends on DONGLE_OLD && IRDA - help - Say Y here if you want to build support for the ACTiSYS IR-220L and - IR220L+ dongles. To compile it as a module, choose M here. The - ACTiSYS dongles attaches to the normal 9-pin serial port connector, - and can currently only be used by IrTTY. To activate support for - ACTiSYS dongles you will have to start irattach like this: - "irattach -d actisys" or "irattach -d actisys+". - -config TEKRAM_DONGLE_OLD - tristate "Tekram IrMate 210B dongle" - depends on DONGLE_OLD && IRDA - help - Say Y here if you want to build support for the Tekram IrMate 210B - dongle. To compile it as a module, choose M here. The Tekram dongle - attaches to the normal 9-pin serial port connector, and can - currently only be used by IrTTY. To activate support for Tekram - dongles you will have to start irattach like this: - "irattach -d tekram". - -config GIRBIL_DONGLE_OLD - tristate "Greenwich GIrBIL dongle" - depends on DONGLE_OLD && IRDA - help - Say Y here if you want to build support for the Greenwich GIrBIL - dongle. To compile it as a module, choose M here. The Greenwich - dongle attaches to the normal 9-pin serial port connector, and can - currently only be used by IrTTY. To activate support for Greenwich - dongles you will have to insert "irattach -d girbil" in the - /etc/irda/drivers script. - -config LITELINK_DONGLE_OLD - tristate "Parallax LiteLink dongle" - depends on DONGLE_OLD && IRDA - help - Say Y here if you want to build support for the Parallax Litelink - dongle. To compile it as a module, choose M here. The Parallax - dongle attaches to the normal 9-pin serial port connector, and can - currently only be used by IrTTY. To activate support for Parallax - dongles you will have to start irattach like this: - "irattach -d litelink". - -config MCP2120_DONGLE_OLD - tristate "Microchip MCP2120" - depends on DONGLE_OLD && IRDA - help - Say Y here if you want to build support for the Microchip MCP2120 - dongle. To compile it as a module, choose M here. The MCP2120 dongle - attaches to the normal 9-pin serial port connector, and can - currently only be used by IrTTY. To activate support for MCP2120 - dongles you will have to insert "irattach -d mcp2120" in the - /etc/irda/drivers script. - - You must build this dongle yourself. For more information see: - <http://www.eyetap.org/~tangf/irda_sir_linux.html> - -config OLD_BELKIN_DONGLE_OLD - tristate "Old Belkin dongle" - depends on DONGLE_OLD && IRDA - help - Say Y here if you want to build support for the Adaptec Airport 1000 - and 2000 dongles. To compile it as a module, choose M here: the module - will be called old_belkin. Some information is contained in the - comments at the top of <file:drivers/net/irda/old_belkin.c>. - -config ACT200L_DONGLE_OLD - tristate "ACTiSYS IR-200L dongle (EXPERIMENTAL)" - depends on DONGLE_OLD && EXPERIMENTAL && IRDA - help - Say Y here if you want to build support for the ACTiSYS IR-200L - dongle. To compile it as a module, choose M here. The ACTiSYS - IR-200L dongle attaches to the normal 9-pin serial port connector, - and can currently only be used by IrTTY. To activate support for - ACTiSYS IR-200L dongles you will have to start irattach like this: - "irattach -d act200l". - -config MA600_DONGLE_OLD - tristate "Mobile Action MA600 dongle (EXPERIMENTAL)" - depends on DONGLE_OLD && EXPERIMENTAL && IRDA - ---help--- - Say Y here if you want to build support for the Mobile Action MA600 - dongle. To compile it as a module, choose M here. The MA600 dongle - attaches to the normal 9-pin serial port connector, and can - currently only be tested on IrCOMM. To activate support for MA600 - dongles you will have to insert "irattach -d ma600" in the - /etc/irda/drivers script. Note: irutils 0.9.15 requires no - modification. irutils 0.9.9 needs modification. For more - information, download the following tar gzip file. - - There is a pre-compiled module on - <http://engsvr.ust.hk/~eetwl95/ma600.html> - -config EP7211_IR - tristate "EP7211 I/R support" - depends on DONGLE_OLD && ARCH_EP7211 && IRDA - comment "FIR device drivers" config USB_IRDA |