summaryrefslogtreecommitdiffstats
path: root/drivers/net/irda
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda')
-rw-r--r--drivers/net/irda/ali-ircc.c4
-rw-r--r--drivers/net/irda/donauboe.c2
-rw-r--r--drivers/net/irda/donauboe.h2
-rw-r--r--drivers/net/irda/girbil-sir.c2
-rw-r--r--drivers/net/irda/irda-usb.c4
-rw-r--r--drivers/net/irda/mcs7780.c6
-rw-r--r--drivers/net/irda/nsc-ircc.c2
-rw-r--r--drivers/net/irda/nsc-ircc.h2
-rw-r--r--drivers/net/irda/pxaficp_ir.c4
-rw-r--r--drivers/net/irda/smsc-ircc2.c2
-rw-r--r--drivers/net/irda/via-ircc.c98
-rw-r--r--drivers/net/irda/vlsi_ir.h4
12 files changed, 40 insertions, 92 deletions
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 92631eb6f6a..872183f29ec 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -76,7 +76,7 @@ static int ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
static int ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
static int ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
-/* These are the currently known ALi sourth-bridge chipsets, the only one difference
+/* These are the currently known ALi south-bridge chipsets, the only one difference
* is that M1543C doesn't support HP HDSL-3600
*/
static ali_chip_t chips[] =
@@ -1108,7 +1108,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
outb(lcr, iobase+UART_LCR); /* Set 8N1 */
outb(fcr, iobase+UART_FCR); /* Enable FIFO's */
- /* without this, the conection will be broken after come back from FIR speed,
+ /* without this, the connection will be broken after come back from FIR speed,
but with this, the SIR connection is harder to established */
outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index f81d944fc36..174cafad2c1 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -56,7 +56,7 @@
/* do_probe module parameter Enable this code */
/* Probe code is very useful for understanding how the hardware works */
/* Use it with various combinations of TT_LEN, RX_LEN */
-/* Strongly recomended, disable if the probe fails on your machine */
+/* Strongly recommended, disable if the probe fails on your machine */
/* and send me <james@fishsoup.dhs.org> the output of dmesg */
#define USE_PROBE 1
#undef USE_PROBE
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 77fcf445916..d92d54e839b 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -51,7 +51,7 @@
/* The documentation for this chip is allegedly released */
/* However I have not seen it, not have I managed to contact */
-/* anyone who has. HOWEVER the chip bears a striking resemblence */
+/* anyone who has. HOWEVER the chip bears a striking resemblance */
/* to the IrDA controller in the Toshiba RISC TMPR3922 chip */
/* the documentation for this is freely available at */
/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index a31b8fa8aaa..96cdecff349 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -38,7 +38,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed);
/* Control register 1 */
#define GIRBIL_TXEN 0x01 /* Enable transmitter */
#define GIRBIL_RXEN 0x02 /* Enable receiver */
-#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */
+#define GIRBIL_ECAN 0x04 /* Cancel self emitted data */
#define GIRBIL_ECHO 0x08 /* Echo control characters */
/* LED Current Register (0x2) */
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e4ea61944c2..d9267cb98a2 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -370,7 +370,7 @@ static void speed_bulk_callback(struct urb *urb)
/* urb is now available */
//urb->status = 0; -> tested above
- /* New speed and xbof is now commited in hardware */
+ /* New speed and xbof is now committed in hardware */
self->new_speed = -1;
self->new_xbofs = -1;
@@ -602,7 +602,7 @@ static void write_bulk_callback(struct urb *urb)
IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
irda_usb_change_speed_xbofs(self);
} else {
- /* New speed and xbof is now commited in hardware */
+ /* New speed and xbof is now committed in hardware */
self->new_speed = -1;
self->new_xbofs = -1;
/* Done, waiting for next packet */
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index cc821de2c96..be52bfed66a 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)
mcs_get_reg(mcs, MCS_MODE_REG, &rval);
- /* MINRXPW values recomended by MosChip */
+ /* MINRXPW values recommended by MosChip */
if (mcs->new_speed <= 115200) {
rval &= ~MCS_FIR;
@@ -799,7 +799,7 @@ static void mcs_receive_irq(struct urb *urb)
ret = usb_submit_urb(urb, GFP_ATOMIC);
}
-/* Transmit callback funtion. */
+/* Transmit callback function. */
static void mcs_send_irq(struct urb *urb)
{
struct mcs_cb *mcs = urb->context;
@@ -811,7 +811,7 @@ static void mcs_send_irq(struct urb *urb)
netif_wake_queue(ndev);
}
-/* Transmit callback funtion. */
+/* Transmit callback function. */
static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb,
struct net_device *ndev)
{
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 559fe854d76..7a963d4e6d0 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -716,7 +716,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
int reg, com = 0;
int pnp;
- /* Read funtion enable register (FER) */
+ /* Read function enable register (FER) */
outb(CFG_338_FER, cfg_base);
reg = inb(cfg_base+1);
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 7ba7738759b..32fa58211fa 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -135,7 +135,7 @@
#define LSR_TXRDY 0x20 /* Transmitter ready */
#define LSR_TXEMP 0x40 /* Transmitter empty */
-#define ASCR 0x07 /* Auxillary Status and Control Register */
+#define ASCR 0x07 /* Auxiliary Status and Control Register */
#define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */
#define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */
#define ASCR_S_EOT 0x04 /* Set end of transmission */
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index c192c31e4c5..001ed0a255f 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -40,7 +40,7 @@
#define ICCR0_AME (1 << 7) /* Address match enable */
#define ICCR0_TIE (1 << 6) /* Transmit FIFO interrupt enable */
-#define ICCR0_RIE (1 << 5) /* Recieve FIFO interrupt enable */
+#define ICCR0_RIE (1 << 5) /* Receive FIFO interrupt enable */
#define ICCR0_RXE (1 << 4) /* Receive enable */
#define ICCR0_TXE (1 << 3) /* Transmit enable */
#define ICCR0_TUS (1 << 2) /* Transmit FIFO underrun select */
@@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id)
}
if (icsr0 & ICSR0_EIF) {
- /* An error in FIFO occured, or there is a end of frame */
+ /* An error in FIFO occurred, or there is a end of frame */
pxa_irda_fir_irq_eif(si, dev, icsr0);
}
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1c1677cfea2..8800e1fe412 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -1582,7 +1582,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
int iobase;
int iir, lsr;
- /* Already locked comming here in smsc_ircc_interrupt() */
+ /* Already locked coming here in smsc_ircc_interrupt() */
/*spin_lock(&self->lock);*/
iobase = self->io.sir_base;
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 67c0ad42d81..f504b262ba3 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -29,7 +29,7 @@ F02 Oct/28/02: Add SB device ID for 3147 and 3177.
2004-02-16: <sda@bdit.de>
- Removed unneeded 'legacy' pci stuff.
-- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff.
+- Make sure SIR mode is set (hw_init()) before calling mode-dependent stuff.
- On speed change from core, don't send SIR frame with new speed.
Use current speed and change speeds later.
- Make module-param dongle_id actually work.
@@ -75,15 +75,9 @@ static int dongle_id = 0; /* default: probe */
/* We can't guess the type of connected dongle, user *must* supply it. */
module_param(dongle_id, int, 0);
-/* FIXME : we should not need this, because instances should be automatically
- * managed by the PCI layer. Especially that we seem to only be using the
- * first entry. Jean II */
-/* Max 4 instances for now */
-static struct via_ircc_cb *dev_self[] = { NULL, NULL, NULL, NULL };
-
/* Some prototypes */
-static int via_ircc_open(int i, chipio_t * info, unsigned int id);
-static int via_ircc_close(struct via_ircc_cb *self);
+static int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
+ unsigned int id);
static int via_ircc_dma_receive(struct via_ircc_cb *self);
static int via_ircc_dma_receive_complete(struct via_ircc_cb *self,
int iobase);
@@ -215,7 +209,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
pci_write_config_byte(pcidev,0x42,(bTmp | 0xf0));
pci_write_config_byte(pcidev,0x5a,0xc0);
WriteLPCReg(0x28, 0x70 );
- if (via_ircc_open(0, &info,0x3076) == 0)
+ if (via_ircc_open(pcidev, &info, 0x3076) == 0)
rc=0;
} else
rc = -ENODEV; //IR not turn on
@@ -254,7 +248,7 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
info.irq=FirIRQ;
info.dma=FirDRQ1;
info.dma2=FirDRQ0;
- if (via_ircc_open(0, &info,0x3096) == 0)
+ if (via_ircc_open(pcidev, &info, 0x3096) == 0)
rc=0;
} else
rc = -ENODEV; //IR not turn on !!!!!
@@ -264,48 +258,10 @@ static int __devinit via_init_one (struct pci_dev *pcidev, const struct pci_devi
return rc;
}
-/*
- * Function via_ircc_clean ()
- *
- * Close all configured chips
- *
- */
-static void via_ircc_clean(void)
-{
- int i;
-
- IRDA_DEBUG(3, "%s()\n", __func__);
-
- for (i=0; i < ARRAY_SIZE(dev_self); i++) {
- if (dev_self[i])
- via_ircc_close(dev_self[i]);
- }
-}
-
-static void __devexit via_remove_one (struct pci_dev *pdev)
-{
- IRDA_DEBUG(3, "%s()\n", __func__);
-
- /* FIXME : This is ugly. We should use pci_get_drvdata(pdev);
- * to get our driver instance and call directly via_ircc_close().
- * See vlsi_ir for details...
- * Jean II */
- via_ircc_clean();
-
- /* FIXME : This should be in via_ircc_close(), because here we may
- * theoritically disable still configured devices :-( - Jean II */
- pci_disable_device(pdev);
-}
-
static void __exit via_ircc_cleanup(void)
{
IRDA_DEBUG(3, "%s()\n", __func__);
- /* FIXME : This should be redundant, as pci_unregister_driver()
- * should call via_remove_one() on each device.
- * Jean II */
- via_ircc_clean();
-
/* Cleanup all instances of the driver */
pci_unregister_driver (&via_driver);
}
@@ -324,12 +280,13 @@ static const struct net_device_ops via_ircc_fir_ops = {
};
/*
- * Function via_ircc_open (iobase, irq)
+ * Function via_ircc_open(pdev, iobase, irq)
*
* Open driver instance
*
*/
-static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
+static __devinit int via_ircc_open(struct pci_dev *pdev, chipio_t * info,
+ unsigned int id)
{
struct net_device *dev;
struct via_ircc_cb *self;
@@ -337,9 +294,6 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
IRDA_DEBUG(3, "%s()\n", __func__);
- if (i >= ARRAY_SIZE(dev_self))
- return -ENOMEM;
-
/* Allocate new instance of the driver */
dev = alloc_irdadev(sizeof(struct via_ircc_cb));
if (dev == NULL)
@@ -349,13 +303,8 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
self->netdev = dev;
spin_lock_init(&self->lock);
- /* FIXME : We should store our driver instance in the PCI layer,
- * using pci_set_drvdata(), not in this array.
- * See vlsi_ir for details... - Jean II */
- /* FIXME : 'i' is always 0 (see via_init_one()) :-( - Jean II */
- /* Need to store self somewhere */
- dev_self[i] = self;
- self->index = i;
+ pci_set_drvdata(pdev, self);
+
/* Initialize Resource */
self->io.cfg_base = info->cfg_base;
self->io.fir_base = info->fir_base;
@@ -385,7 +334,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
self->io.dongle_id = dongle_id;
/* The only value we must override it the baudrate */
- /* Maximum speeds and capabilities are dongle-dependant. */
+ /* Maximum speeds and capabilities are dongle-dependent. */
switch( self->io.dongle_id ){
case 0x0d:
self->qos.baud_rate.bits =
@@ -414,7 +363,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
/* Allocate memory if needed */
self->rx_buff.head =
- dma_alloc_coherent(NULL, self->rx_buff.truesize,
+ dma_alloc_coherent(&pdev->dev, self->rx_buff.truesize,
&self->rx_buff_dma, GFP_KERNEL);
if (self->rx_buff.head == NULL) {
err = -ENOMEM;
@@ -423,7 +372,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
memset(self->rx_buff.head, 0, self->rx_buff.truesize);
self->tx_buff.head =
- dma_alloc_coherent(NULL, self->tx_buff.truesize,
+ dma_alloc_coherent(&pdev->dev, self->tx_buff.truesize,
&self->tx_buff_dma, GFP_KERNEL);
if (self->tx_buff.head == NULL) {
err = -ENOMEM;
@@ -455,33 +404,32 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
via_hw_init(self);
return 0;
err_out4:
- dma_free_coherent(NULL, self->tx_buff.truesize,
+ dma_free_coherent(&pdev->dev, self->tx_buff.truesize,
self->tx_buff.head, self->tx_buff_dma);
err_out3:
- dma_free_coherent(NULL, self->rx_buff.truesize,
+ dma_free_coherent(&pdev->dev, self->rx_buff.truesize,
self->rx_buff.head, self->rx_buff_dma);
err_out2:
release_region(self->io.fir_base, self->io.fir_ext);
err_out1:
+ pci_set_drvdata(pdev, NULL);
free_netdev(dev);
- dev_self[i] = NULL;
return err;
}
/*
- * Function via_ircc_close (self)
+ * Function via_remove_one(pdev)
*
* Close driver instance
*
*/
-static int via_ircc_close(struct via_ircc_cb *self)
+static void __devexit via_remove_one(struct pci_dev *pdev)
{
+ struct via_ircc_cb *self = pci_get_drvdata(pdev);
int iobase;
IRDA_DEBUG(3, "%s()\n", __func__);
- IRDA_ASSERT(self != NULL, return -1;);
-
iobase = self->io.fir_base;
ResetChip(iobase, 5); //hardware reset.
@@ -493,16 +441,16 @@ static int via_ircc_close(struct via_ircc_cb *self)
__func__, self->io.fir_base);
release_region(self->io.fir_base, self->io.fir_ext);
if (self->tx_buff.head)
- dma_free_coherent(NULL, self->tx_buff.truesize,
+ dma_free_coherent(&pdev->dev, self->tx_buff.truesize,
self->tx_buff.head, self->tx_buff_dma);
if (self->rx_buff.head)
- dma_free_coherent(NULL, self->rx_buff.truesize,
+ dma_free_coherent(&pdev->dev, self->rx_buff.truesize,
self->rx_buff.head, self->rx_buff_dma);
- dev_self[self->index] = NULL;
+ pci_set_drvdata(pdev, NULL);
free_netdev(self->netdev);
- return 0;
+ pci_disable_device(pdev);
}
/*
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index d66fab854bf..a076eb12534 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -209,7 +209,7 @@ enum vlsi_pio_irintr {
IRINTR_ACTEN = 0x80, /* activity interrupt enable */
IRINTR_ACTIVITY = 0x40, /* activity monitor (traffic detected) */
IRINTR_RPKTEN = 0x20, /* receive packet interrupt enable*/
- IRINTR_RPKTINT = 0x10, /* rx-packet transfered from fifo to memory finished */
+ IRINTR_RPKTINT = 0x10, /* rx-packet transferred from fifo to memory finished */
IRINTR_TPKTEN = 0x08, /* transmit packet interrupt enable */
IRINTR_TPKTINT = 0x04, /* last bit of tx-packet+crc shifted to ir-pulser */
IRINTR_OE_EN = 0x02, /* UART rx fifo overrun error interrupt enable */
@@ -739,7 +739,7 @@ typedef struct vlsi_irda_dev {
/* the remapped error flags we use for returning from frame
* post-processing in vlsi_process_tx/rx() after it was completed
* by the hardware. These functions either return the >=0 number
- * of transfered bytes in case of success or the negative (-)
+ * of transferred bytes in case of success or the negative (-)
* of the or'ed error flags.
*/
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-12 03:56:06 +0000