summaryrefslogtreecommitdiffstats
path: root/drivers/net/irda
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/irda')
-rw-r--r--drivers/net/irda/act200l.c297
-rw-r--r--drivers/net/irda/actisys.c288
-rw-r--r--drivers/net/irda/ep7211_ir.c125
-rw-r--r--drivers/net/irda/esi.c149
-rw-r--r--drivers/net/irda/girbil.c250
-rw-r--r--drivers/net/irda/litelink.c179
-rw-r--r--drivers/net/irda/ma600.c354
-rw-r--r--drivers/net/irda/mcp2120.c240
-rw-r--r--drivers/net/irda/old_belkin.c164
-rw-r--r--drivers/net/irda/tekram.c282
10 files changed, 0 insertions, 2328 deletions
diff --git a/drivers/net/irda/act200l.c b/drivers/net/irda/act200l.c
deleted file mode 100644
index 756cd44e857..00000000000
--- a/drivers/net/irda/act200l.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*********************************************************************
- *
- * Filename: act200l.c
- * Version: 0.8
- * Description: Implementation for the ACTiSYS ACT-IR200L dongle
- * Status: Experimental.
- * Author: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- * Created at: Fri Aug 3 17:35:42 2001
- * Modified at: Fri Aug 17 10:22:40 2001
- * Modified by: SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>
- *
- * Copyright (c) 2001 SHIMIZU Takuya, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int act200l_reset(struct irda_task *task);
-static void act200l_open(dongle_t *self, struct qos_info *qos);
-static void act200l_close(dongle_t *self);
-static int act200l_change_speed(struct irda_task *task);
-
-/* Regsiter 0: Control register #1 */
-#define ACT200L_REG0 0x00
-#define ACT200L_TXEN 0x01 /* Enable transmitter */
-#define ACT200L_RXEN 0x02 /* Enable receiver */
-
-/* Register 1: Control register #2 */
-#define ACT200L_REG1 0x10
-#define ACT200L_LODB 0x01 /* Load new baud rate count value */
-#define ACT200L_WIDE 0x04 /* Expand the maximum allowable pulse */
-
-/* Register 4: Output Power register */
-#define ACT200L_REG4 0x40
-#define ACT200L_OP0 0x01 /* Enable LED1C output */
-#define ACT200L_OP1 0x02 /* Enable LED2C output */
-#define ACT200L_BLKR 0x04
-
-/* Register 5: Receive Mode register */
-#define ACT200L_REG5 0x50
-#define ACT200L_RWIDL 0x01 /* fixed 1.6us pulse mode */
-
-/* Register 6: Receive Sensitivity register #1 */
-#define ACT200L_REG6 0x60
-#define ACT200L_RS0 0x01 /* receive threshold bit 0 */
-#define ACT200L_RS1 0x02 /* receive threshold bit 1 */
-
-/* Register 7: Receive Sensitivity register #2 */
-#define ACT200L_REG7 0x70
-#define ACT200L_ENPOS 0x04 /* Ignore the falling edge */
-
-/* Register 8,9: Baud Rate Dvider register #1,#2 */
-#define ACT200L_REG8 0x80
-#define ACT200L_REG9 0x90
-
-#define ACT200L_2400 0x5f
-#define ACT200L_9600 0x17
-#define ACT200L_19200 0x0b
-#define ACT200L_38400 0x05
-#define ACT200L_57600 0x03
-#define ACT200L_115200 0x01
-
-/* Register 13: Control register #3 */
-#define ACT200L_REG13 0xd0
-#define ACT200L_SHDW 0x01 /* Enable access to shadow registers */
-
-/* Register 15: Status register */
-#define ACT200L_REG15 0xf0
-
-/* Register 21: Control register #4 */
-#define ACT200L_REG21 0x50
-#define ACT200L_EXCK 0x02 /* Disable clock output driver */
-#define ACT200L_OSCL 0x04 /* oscillator in low power, medium accuracy mode */
-
-static struct dongle_reg dongle = {
- .type = IRDA_ACT200L_DONGLE,
- .open = act200l_open,
- .close = act200l_close,
- .reset = act200l_reset,
- .change_speed = act200l_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init act200l_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit act200l_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void act200l_open(dongle_t *self, struct qos_info *qos)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- /* Power on the dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Set the speeds we can accept */
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x03;
-}
-
-static void act200l_close(dongle_t *self)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- /* Power off the dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function act200l_change_speed (dev, speed)
- *
- * Set the speed for the ACTiSYS ACT-IR200L type dongle.
- *
- */
-static int act200l_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 control[3];
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- self->speed_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- if (irda_task_execute(self, act200l_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- }
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Clear DTR and set RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- switch (speed) {
- case 9600:
- default:
- control[0] = ACT200L_REG8 | (ACT200L_9600 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_9600 >> 4) & 0x0f);
- break;
- case 19200:
- control[0] = ACT200L_REG8 | (ACT200L_19200 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_19200 >> 4) & 0x0f);
- break;
- case 38400:
- control[0] = ACT200L_REG8 | (ACT200L_38400 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_38400 >> 4) & 0x0f);
- break;
- case 57600:
- control[0] = ACT200L_REG8 | (ACT200L_57600 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_57600 >> 4) & 0x0f);
- break;
- case 115200:
- control[0] = ACT200L_REG8 | (ACT200L_115200 & 0x0f);
- control[1] = ACT200L_REG9 | ((ACT200L_115200 >> 4) & 0x0f);
- break;
- }
- control[2] = ACT200L_REG1 | ACT200L_LODB | ACT200L_WIDE;
-
- /* Write control bytes */
- self->write(self->dev, control, 3);
- irda_task_next_state(task, IRDA_TASK_WAIT);
- ret = msecs_to_jiffies(5);
- break;
- case IRDA_TASK_WAIT:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function act200l_reset (driver)
- *
- * Reset the ACTiSYS ACT-IR200L type dongle.
- */
-static int act200l_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u8 control[9] = {
- ACT200L_REG15,
- ACT200L_REG13 | ACT200L_SHDW,
- ACT200L_REG21 | ACT200L_EXCK | ACT200L_OSCL,
- ACT200L_REG13,
- ACT200L_REG7 | ACT200L_ENPOS,
- ACT200L_REG6 | ACT200L_RS0 | ACT200L_RS1,
- ACT200L_REG5 | ACT200L_RWIDL,
- ACT200L_REG4 | ACT200L_OP0 | ACT200L_OP1 | ACT200L_BLKR,
- ACT200L_REG0 | ACT200L_TXEN | ACT200L_RXEN
- };
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Power on the dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT1:
- /* Reset the dongle : set RTS low for 25 ms */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT2:
- /* Clear DTR and set RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- /* Write control bytes */
- self->write(self->dev, control, 9);
- irda_task_next_state(task, IRDA_TASK_WAIT3);
- ret = msecs_to_jiffies(15);
- break;
- case IRDA_TASK_WAIT3:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("SHIMIZU Takuya <tshimizu@ga2.so-net.ne.jp>");
-MODULE_DESCRIPTION("ACTiSYS ACT-IR200L dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-10"); /* IRDA_ACT200L_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize ACTiSYS ACT-IR200L module
- *
- */
-module_init(act200l_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup ACTiSYS ACT-IR200L module
- *
- */
-module_exit(act200l_cleanup);
diff --git a/drivers/net/irda/actisys.c b/drivers/net/irda/actisys.c
deleted file mode 100644
index ae0b80a5680..00000000000
--- a/drivers/net/irda/actisys.c
+++ /dev/null
@@ -1,288 +0,0 @@
-/*********************************************************************
- *
- * Filename: actisys.c
- * Version: 1.0
- * Description: Implementation for the ACTiSYS IR-220L and IR-220L+
- * dongles
- * Status: Beta.
- * Authors: Dag Brattli <dagb@cs.uit.no> (initially)
- * Jean Tourrilhes <jt@hpl.hp.com> (new version)
- * Created at: Wed Oct 21 20:02:35 1998
- * Modified at: Fri Dec 17 09:10:43 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
- * Copyright (c) 1999 Jean Tourrilhes
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * Neither Dag Brattli nor University of Tromsø admit liability nor
- * provide warranty for any of this software. This material is
- * provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-/*
- * Changelog
- *
- * 0.8 -> 0.9999 - Jean
- * o New initialisation procedure : much safer and correct
- * o New procedure the change speed : much faster and simpler
- * o Other cleanups & comments
- * Thanks to Lichen Wang @ Actisys for his excellent help...
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-/*
- * Define the timing of the pulses we send to the dongle (to reset it, and
- * to toggle speeds). Basically, the limit here is the propagation speed of
- * the signals through the serial port, the dongle being much faster. Any
- * serial port support 115 kb/s, so we are sure that pulses 8.5 us wide can
- * go through cleanly . If you are on the wild side, you can try to lower
- * this value (Actisys recommended me 2 us, and 0 us work for me on a P233!)
- */
-#define MIN_DELAY 10 /* 10 us to be on the conservative side */
-
-static int actisys_change_speed(struct irda_task *task);
-static int actisys_reset(struct irda_task *task);
-static void actisys_open(dongle_t *self, struct qos_info *qos);
-static void actisys_close(dongle_t *self);
-
-/* These are the baudrates supported, in the order available */
-/* Note : the 220L doesn't support 38400, but we will fix that below */
-static __u32 baud_rates[] = { 9600, 19200, 57600, 115200, 38400 };
-#define MAX_SPEEDS 5
-
-static struct dongle_reg dongle = {
- .type = IRDA_ACTISYS_DONGLE,
- .open = actisys_open,
- .close = actisys_close,
- .reset = actisys_reset,
- .change_speed = actisys_change_speed,
- .owner = THIS_MODULE,
-};
-
-static struct dongle_reg dongle_plus = {
- .type = IRDA_ACTISYS_PLUS_DONGLE,
- .open = actisys_open,
- .close = actisys_close,
- .reset = actisys_reset,
- .change_speed = actisys_change_speed,
- .owner = THIS_MODULE,
-};
-
-/*
- * Function actisys_change_speed (task)
- *
- * There is two model of Actisys dongle we are dealing with,
- * the 220L and 220L+. At this point, only irattach knows with
- * kind the user has requested (it was an argument on irattach
- * command line).
- * So, we register a dongle of each sort and let irattach
- * pick the right one...
- */
-static int __init actisys_init(void)
-{
- int ret;
-
- /* First, register an Actisys 220L dongle */
- ret = irda_device_register_dongle(&dongle);
- if (ret < 0)
- return ret;
- /* Now, register an Actisys 220L+ dongle */
- ret = irda_device_register_dongle(&dongle_plus);
- if (ret < 0) {
- irda_device_unregister_dongle(&dongle);
- return ret;
- }
- return 0;
-}
-
-static void __exit actisys_cleanup(void)
-{
- /* We have to remove both dongles */
- irda_device_unregister_dongle(&dongle);
- irda_device_unregister_dongle(&dongle_plus);
-}
-
-static void actisys_open(dongle_t *self, struct qos_info *qos)
-{
- /* Power on the dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Set the speeds we can accept */
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
-
- /* Remove support for 38400 if this is not a 220L+ dongle */
- if (self->issue->type == IRDA_ACTISYS_DONGLE)
- qos->baud_rate.bits &= ~IR_38400;
-
- qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
-}
-
-static void actisys_close(dongle_t *self)
-{
- /* Power off the dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function actisys_change_speed (task)
- *
- * Change speed of the ACTiSYS IR-220L and IR-220L+ type IrDA dongles.
- * To cycle through the available baud rates, pulse RTS low for a few us.
- *
- * First, we reset the dongle to always start from a known state.
- * Then, we cycle through the speeds by pulsing RTS low and then up.
- * The dongle allow us to pulse quite fast, se we can set speed in one go,
- * which is must faster ( < 100 us) and less complex than what is found
- * in some other dongle drivers...
- * Note that even if the new speed is the same as the current speed,
- * we reassert the speed. This make sure that things are all right,
- * and it's fast anyway...
- * By the way, this function will work for both type of dongles,
- * because the additional speed is at the end of the sequence...
- */
-static int actisys_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param; /* Target speed */
- int ret = 0;
- int i = 0;
-
- IRDA_DEBUG(4, "%s(), speed=%d (was %d)\n", __FUNCTION__, speed,
- self->speed);
-
- /* Go to a known state by reseting the dongle */
-
- /* Reset the dongle : set DTR low for 10 us */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
- udelay(MIN_DELAY);
-
- /* Go back to normal mode (we are now at 9600 b/s) */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /*
- * Now, we can set the speed requested. Send RTS pulses until we
- * reach the target speed
- */
- for (i=0; i<MAX_SPEEDS; i++) {
- if (speed == baud_rates[i]) {
- self->speed = baud_rates[i];
- break;
- }
- /* Make sure previous pulse is finished */
- udelay(MIN_DELAY);
-
- /* Set RTS low for 10 us */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
- udelay(MIN_DELAY);
-
- /* Set RTS high for 10 us */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- }
-
- /* Check if life is sweet... */
- if (i >= MAX_SPEEDS)
- ret = -1; /* This should not happen */
-
- /* Basta lavoro, on se casse d'ici... */
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return ret;
-}
-
-/*
- * Function actisys_reset (task)
- *
- * Reset the Actisys type dongle. Warning, this function must only be
- * called with a process context!
- *
- * We need to do two things in this function :
- * o first make sure that the dongle is in a state where it can operate
- * o second put the dongle in a know state
- *
- * The dongle is powered of the RTS and DTR lines. In the dongle, there
- * is a big capacitor to accommodate the current spikes. This capacitor
- * takes a least 50 ms to be charged. In theory, the Bios set those lines
- * up, so by the time we arrive here we should be set. It doesn't hurt
- * to be on the conservative side, so we will wait...
- * Then, we set the speed to 9600 b/s to get in a known state (see in
- * change_speed for details). It is needed because the IrDA stack
- * has tried to set the speed immediately after our first return,
- * so before we can be sure the dongle is up and running.
- */
-static int actisys_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- int ret = 0;
-
- IRDA_ASSERT(task != NULL, return -1;);
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Set both DTR & RTS to power up the dongle */
- /* In theory redundant with power up in actisys_open() */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep 50 ms to make sure capacitor is charged */
- ret = msecs_to_jiffies(50);
- irda_task_next_state(task, IRDA_TASK_WAIT);
- break;
- case IRDA_TASK_WAIT:
- /* Reset the dongle : set DTR low for 10 us */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
- udelay(MIN_DELAY);
-
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- self->speed = 9600; /* That's the default */
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no> - Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("ACTiSYS IR-220L and IR-220L+ dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-2"); /* IRDA_ACTISYS_DONGLE */
-MODULE_ALIAS("irda-dongle-3"); /* IRDA_ACTISYS_PLUS_DONGLE */
-
-
-/*
- * Function init_module (void)
- *
- * Initialize Actisys module
- *
- */
-module_init(actisys_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Actisys module
- *
- */
-module_exit(actisys_cleanup);
diff --git a/drivers/net/irda/ep7211_ir.c b/drivers/net/irda/ep7211_ir.c
deleted file mode 100644
index 4cba38f7e4a..00000000000
--- a/drivers/net/irda/ep7211_ir.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * IR port driver for the Cirrus Logic EP7211 processor.
- *
- * Copyright 2001, Blue Mug Inc. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-
-#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
-#define MAX_DELAY 10000 /* 1 ms */
-
-static void ep7211_ir_open(dongle_t *self, struct qos_info *qos);
-static void ep7211_ir_close(dongle_t *self);
-static int ep7211_ir_change_speed(struct irda_task *task);
-static int ep7211_ir_reset(struct irda_task *task);
-
-static DEFINE_SPINLOCK(ep7211_lock);
-
-static struct dongle_reg dongle = {
- .type = IRDA_EP7211_IR,
- .open = ep7211_ir_open,
- .close = ep7211_ir_close,
- .reset = ep7211_ir_reset,
- .change_speed = ep7211_ir_change_speed,
- .owner = THIS_MODULE,
-};
-
-static void ep7211_ir_open(dongle_t *self, struct qos_info *qos)
-{
- unsigned int syscon1, flags;
-
- spin_lock_irqsave(&ep7211_lock, flags);
-
- /* Turn on the SIR encoder. */
- syscon1 = clps_readl(SYSCON1);
- syscon1 |= SYSCON1_SIREN;
- clps_writel(syscon1, SYSCON1);
-
- /* XXX: We should disable modem status interrupts on the first
- UART (interrupt #14). */
-
- spin_unlock_irqrestore(&ep7211_lock, flags);
-}
-
-static void ep7211_ir_close(dongle_t *self)
-{
- unsigned int syscon1, flags;
-
- spin_lock_irqsave(&ep7211_lock, flags);
-
- /* Turn off the SIR encoder. */
- syscon1 = clps_readl(SYSCON1);
- syscon1 &= ~SYSCON1_SIREN;
- clps_writel(syscon1, SYSCON1);
-
- /* XXX: If we've disabled the modem status interrupts, we should
- reset them back to their original state. */
-
- spin_unlock_irqrestore(&ep7211_lock, flags);
-}
-
-/*
- * Function ep7211_ir_change_speed (task)
- *
- * Change speed of the EP7211 I/R port. We don't really have to do anything
- * for the EP7211 as long as the rate is being changed at the serial port
- * level.
- */
-static int ep7211_ir_change_speed(struct irda_task *task)
-{
- irda_task_next_state(task, IRDA_TASK_DONE);
- return 0;
-}
-
-/*
- * Function ep7211_ir_reset (task)
- *
- * Reset the EP7211 I/R. We don't really have to do anything.
- *
- */
-static int ep7211_ir_reset(struct irda_task *task)
-{
- irda_task_next_state(task, IRDA_TASK_DONE);
- return 0;
-}
-
-/*
- * Function ep7211_ir_init(void)
- *
- * Initialize EP7211 I/R module
- *
- */
-static int __init ep7211_ir_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-/*
- * Function ep7211_ir_cleanup(void)
- *
- * Cleanup EP7211 I/R module
- *
- */
-static void __exit ep7211_ir_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-MODULE_AUTHOR("Jon McClintock <jonm@bluemug.com>");
-MODULE_DESCRIPTION("EP7211 I/R driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-8"); /* IRDA_EP7211_IR */
-
-module_init(ep7211_ir_init);
-module_exit(ep7211_ir_cleanup);
diff --git a/drivers/net/irda/esi.c b/drivers/net/irda/esi.c
deleted file mode 100644
index d3a61af6402..00000000000
--- a/drivers/net/irda/esi.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*********************************************************************
- *
- * Filename: esi.c
- * Version: 1.5
- * Description: Driver for the Extended Systems JetEye PC dongle
- * Status: Experimental.
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Sat Feb 21 18:54:38 1998
- * Modified at: Fri Dec 17 09:14:04 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Dag Brattli, <dagb@cs.uit.no>,
- * Copyright (c) 1998 Thomas Davis, <ratbert@radiks.net>,
- * All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static void esi_open(dongle_t *self, struct qos_info *qos);
-static void esi_close(dongle_t *self);
-static int esi_change_speed(struct irda_task *task);
-static int esi_reset(struct irda_task *task);
-
-static struct dongle_reg dongle = {
- .type = IRDA_ESI_DONGLE,
- .open = esi_open,
- .close = esi_close,
- .reset = esi_reset,
- .change_speed = esi_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init esi_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit esi_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void esi_open(dongle_t *self, struct qos_info *qos)
-{
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_115200;
- qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
-}
-
-static void esi_close(dongle_t *dongle)
-{
- /* Power off dongle */
- dongle->set_dtr_rts(dongle->dev, FALSE, FALSE);
-}
-
-/*
- * Function esi_change_speed (task)
- *
- * Set the speed for the Extended Systems JetEye PC ESI-9680 type dongle
- *
- */
-static int esi_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- int dtr, rts;
-
- switch (speed) {
- case 19200:
- dtr = TRUE;
- rts = FALSE;
- break;
- case 115200:
- dtr = rts = TRUE;
- break;
- case 9600:
- default:
- dtr = FALSE;
- rts = TRUE;
- break;
- }
-
- /* Change speed of dongle */
- self->set_dtr_rts(self->dev, dtr, rts);
- self->speed = speed;
-
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-/*
- * Function esi_reset (task)
- *
- * Reset dongle;
- *
- */
-static int esi_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
-
- self->set_dtr_rts(self->dev, FALSE, FALSE);
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Extended Systems JetEye PC dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-1"); /* IRDA_ESI_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize ESI module
- *
- */
-module_init(esi_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup ESI module
- *
- */
-module_exit(esi_cleanup);
-
diff --git a/drivers/net/irda/girbil.c b/drivers/net/irda/girbil.c
deleted file mode 100644
index 1f57391a618..00000000000
--- a/drivers/net/irda/girbil.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*********************************************************************
- *
- * Filename: girbil.c
- * Version: 1.2
- * Description: Implementation for the Greenwich GIrBIL dongle
- * Status: Experimental.
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Sat Feb 6 21:02:33 1999
- * Modified at: Fri Dec 17 09:13:20 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * Neither Dag Brattli nor University of Tromsø admit liability nor
- * provide warranty for any of this software. This material is
- * provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int girbil_reset(struct irda_task *task);
-static void girbil_open(dongle_t *self, struct qos_info *qos);
-static void girbil_close(dongle_t *self);
-static int girbil_change_speed(struct irda_task *task);
-
-/* Control register 1 */
-#define GIRBIL_TXEN 0x01 /* Enable transmitter */
-#define GIRBIL_RXEN 0x02 /* Enable receiver */
-#define GIRBIL_ECAN 0x04 /* Cancel self emmited data */
-#define GIRBIL_ECHO 0x08 /* Echo control characters */
-
-/* LED Current Register (0x2) */
-#define GIRBIL_HIGH 0x20
-#define GIRBIL_MEDIUM 0x21
-#define GIRBIL_LOW 0x22
-
-/* Baud register (0x3) */
-#define GIRBIL_2400 0x30
-#define GIRBIL_4800 0x31
-#define GIRBIL_9600 0x32
-#define GIRBIL_19200 0x33
-#define GIRBIL_38400 0x34
-#define GIRBIL_57600 0x35
-#define GIRBIL_115200 0x36
-
-/* Mode register (0x4) */
-#define GIRBIL_IRDA 0x40
-#define GIRBIL_ASK 0x41
-
-/* Control register 2 (0x5) */
-#define GIRBIL_LOAD 0x51 /* Load the new baud rate value */
-
-static struct dongle_reg dongle = {
- .type = IRDA_GIRBIL_DONGLE,
- .open = girbil_open,
- .close = girbil_close,
- .reset = girbil_reset,
- .change_speed = girbil_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init girbil_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit girbil_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void girbil_open(dongle_t *self, struct qos_info *qos)
-{
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x03;
-}
-
-static void girbil_close(dongle_t *self)
-{
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function girbil_change_speed (dev, speed)
- *
- * Set the speed for the Girbil type dongle.
- *
- */
-static int girbil_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 control[2];
- int ret = 0;
-
- self->speed_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Need to reset the dongle and go to 9600 bps before
- programming */
- if (irda_task_execute(self, girbil_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- }
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Set DTR and Clear RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- switch (speed) {
- case 9600:
- default:
- control[0] = GIRBIL_9600;
- break;
- case 19200:
- control[0] = GIRBIL_19200;
- break;
- case 34800:
- control[0] = GIRBIL_38400;
- break;
- case 57600:
- control[0] = GIRBIL_57600;
- break;
- case 115200:
- control[0] = GIRBIL_115200;
- break;
- }
- control[1] = GIRBIL_LOAD;
-
- /* Write control bytes */
- self->write(self->dev, control, 2);
- irda_task_next_state(task, IRDA_TASK_WAIT);
- ret = msecs_to_jiffies(100);
- break;
- case IRDA_TASK_WAIT:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function girbil_reset (driver)
- *
- * This function resets the girbil dongle.
- *
- * Algorithm:
- * 0. set RTS, and wait at least 5 ms
- * 1. clear RTS
- */
-static int girbil_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u8 control = GIRBIL_TXEN | GIRBIL_RXEN;
- int ret = 0;
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Reset dongle */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- /* Sleep at least 5 ms */
- ret = msecs_to_jiffies(20);
- break;
- case IRDA_TASK_WAIT1:
- /* Set DTR and clear RTS to enter command mode */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(20);
- break;
- case IRDA_TASK_WAIT2:
- /* Write control byte */
- self->write(self->dev, &control, 1);
- irda_task_next_state(task, IRDA_TASK_WAIT3);
- ret = msecs_to_jiffies(20);
- break;
- case IRDA_TASK_WAIT3:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Greenwich GIrBIL dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-4"); /* IRDA_GIRBIL_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize Girbil module
- *
- */
-module_init(girbil_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Girbil module
- *
- */
-module_exit(girbil_cleanup);
-
diff --git a/drivers/net/irda/litelink.c b/drivers/net/irda/litelink.c
deleted file mode 100644
index 7db11431d0f..00000000000
--- a/drivers/net/irda/litelink.c
+++ /dev/null
@@ -1,179 +0,0 @@
-/*********************************************************************
- *
- * Filename: litelink.c
- * Version: 1.1
- * Description: Driver for the Parallax LiteLink dongle
- * Status: Stable
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Fri May 7 12:50:33 1999
- * Modified at: Fri Dec 17 09:14:23 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Dag Brattli, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
-#define MAX_DELAY 10000 /* 1 ms */
-
-static void litelink_open(dongle_t *self, struct qos_info *qos);
-static void litelink_close(dongle_t *self);
-static int litelink_change_speed(struct irda_task *task);
-static int litelink_reset(struct irda_task *task);
-
-/* These are the baudrates supported */
-static __u32 baud_rates[] = { 115200, 57600, 38400, 19200, 9600 };
-
-static struct dongle_reg dongle = {
- .type = IRDA_LITELINK_DONGLE,
- .open = litelink_open,
- .close = litelink_close,
- .reset = litelink_reset,
- .change_speed = litelink_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init litelink_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit litelink_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void litelink_open(dongle_t *self, struct qos_info *qos)
-{
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x7f; /* Needs 0.01 ms */
-}
-
-static void litelink_close(dongle_t *self)
-{
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function litelink_change_speed (task)
- *
- * Change speed of the Litelink dongle. To cycle through the available
- * baud rates, pulse RTS low for a few ms.
- */
-static int litelink_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- int i;
-
- /* Clear RTS to reset dongle */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Cycle through avaiable baudrates until we reach the correct one */
- for (i=0; i<5 && baud_rates[i] != speed; i++) {
- /* Set DTR, clear RTS */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Set DTR, Set RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
- }
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-/*
- * Function litelink_reset (task)
- *
- * Reset the Litelink type dongle.
- *
- */
-static int litelink_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
-
- /* Power on dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Clear RTS to reset dongle */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* This dongles speed defaults to 115200 bps */
- self->speed = 115200;
-
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Parallax Litelink dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-5"); /* IRDA_LITELINK_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize Litelink module
- *
- */
-module_init(litelink_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Litelink module
- *
- */
-module_exit(litelink_cleanup);
diff --git a/drivers/net/irda/ma600.c b/drivers/net/irda/ma600.c
deleted file mode 100644
index f5e6836667f..00000000000
--- a/drivers/net/irda/ma600.c
+++ /dev/null
@@ -1,354 +0,0 @@
-/*********************************************************************
- *
- * Filename: ma600.c
- * Version: 0.1
- * Description: Implementation of the MA600 dongle
- * Status: Experimental.
- * Author: Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95
- * Created at: Sat Jun 10 20:02:35 2000
- * Modified at:
- * Modified by:
- *
- * Note: very thanks to Mr. Maru Wang <maru@mobileaction.com.tw> for providing
- * information on the MA600 dongle
- *
- * Copyright (c) 2000 Leung, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************/
-
-/* define this macro for release version */
-//#define NDEBUG
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-#ifndef NDEBUG
- #undef IRDA_DEBUG
- #define IRDA_DEBUG(n, args...) (printk(KERN_DEBUG args))
-
- #undef ASSERT
- #define ASSERT(expr, func) \
- if(!(expr)) { \
- printk( "Assertion failed! %s,%s,%s,line=%d\n",\
- #expr,__FILE__,__FUNCTION__,__LINE__); \
- func}
-#endif
-
-/* convert hex value to ascii hex */
-static const char hexTbl[] = "0123456789ABCDEF";
-
-
-static void ma600_open(dongle_t *self, struct qos_info *qos);
-static void ma600_close(dongle_t *self);
-static int ma600_change_speed(struct irda_task *task);
-static int ma600_reset(struct irda_task *task);
-
-/* control byte for MA600 */
-#define MA600_9600 0x00
-#define MA600_19200 0x01
-#define MA600_38400 0x02
-#define MA600_57600 0x03
-#define MA600_115200 0x04
-#define MA600_DEV_ID1 0x05
-#define MA600_DEV_ID2 0x06
-#define MA600_2400 0x08
-
-static struct dongle_reg dongle = {
- .type = IRDA_MA600_DONGLE,
- .open = ma600_open,
- .close = ma600_close,
- .reset = ma600_reset,
- .change_speed = ma600_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init ma600_init(void)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit ma600_cleanup(void)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
- irda_device_unregister_dongle(&dongle);
-}
-
-/*
- Power on:
- (0) Clear RTS and DTR for 1 second
- (1) Set RTS and DTR for 1 second
- (2) 9600 bps now
- Note: assume RTS, DTR are clear before
-*/
-static void ma600_open(dongle_t *self, struct qos_info *qos)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
- qos->baud_rate.bits &= IR_2400|IR_9600|IR_19200|IR_38400
- |IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x01; /* Needs at least 1 ms */
- irda_qos_bits_to_value(qos);
-
- //self->set_dtr_rts(self->dev, FALSE, FALSE);
- // should wait 1 second
-
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- // should wait 1 second
-}
-
-static void ma600_close(dongle_t *self)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-static __u8 get_control_byte(__u32 speed)
-{
- __u8 byte;
-
- switch (speed) {
- default:
- case 115200:
- byte = MA600_115200;
- break;
- case 57600:
- byte = MA600_57600;
- break;
- case 38400:
- byte = MA600_38400;
- break;
- case 19200:
- byte = MA600_19200;
- break;
- case 9600:
- byte = MA600_9600;
- break;
- case 2400:
- byte = MA600_2400;
- break;
- }
-
- return byte;
-}
-
-/*
- * Function ma600_change_speed (dev, state, speed)
- *
- * Set the speed for the MA600 type dongle. Warning, this
- * function must be called with a process context!
- *
- * Algorithm
- * 1. Reset
- * 2. clear RTS, set DTR and wait for 1ms
- * 3. send Control Byte to the MA600 through TXD to set new baud rate
- * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
- * it takes about 10 msec)
- * 4. set RTS, set DTR (return to NORMAL Operation)
- * 5. wait at least 10 ms, new setting (baud rate, etc) takes effect here
- * after
- */
-static int ma600_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- static __u8 byte;
- __u8 byte_echo;
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
- ASSERT(task != NULL, return -1;);
-
- if (self->speed_task && self->speed_task != task) {
- IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
- return msecs_to_jiffies(10);
- } else {
- self->speed_task = task;
- }
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- case IRDA_TASK_CHILD_INIT:
- /*
- * Need to reset the dongle and go to 9600 bps before
- * programming
- */
- if (irda_task_execute(self, ma600_reset, NULL, task,
- (void *) speed)) {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* give 1 second to finish */
- ret = msecs_to_jiffies(1000);
- } else {
- irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
- }
- break;
-
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
-
- case IRDA_TASK_CHILD_DONE:
- /* Set DTR, Clear RTS */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- ret = msecs_to_jiffies(1); /* Sleep 1 ms */
- irda_task_next_state(task, IRDA_TASK_WAIT);
- break;
-
- case IRDA_TASK_WAIT:
- speed = (__u32) task->param;
- byte = get_control_byte(speed);
-
- /* Write control byte */
- self->write(self->dev, &byte, sizeof(byte));
-
- irda_task_next_state(task, IRDA_TASK_WAIT1);
-
- /* Wait at least 10 ms */
- ret = msecs_to_jiffies(15);
- break;
-
- case IRDA_TASK_WAIT1:
- /* Read control byte echo */
- self->read(self->dev, &byte_echo, sizeof(byte_echo));
-
- if(byte != byte_echo) {
- /* if control byte != echo, I don't know what to do */
- printk(KERN_WARNING "%s() control byte written != read!\n", __FUNCTION__);
- printk(KERN_WARNING "control byte = 0x%c%c\n",
- hexTbl[(byte>>4)&0x0f], hexTbl[byte&0x0f]);
- printk(KERN_WARNING "byte echo = 0x%c%c\n",
- hexTbl[(byte_echo>>4) & 0x0f],
- hexTbl[byte_echo & 0x0f]);
- #ifndef NDEBUG
- } else {
- IRDA_DEBUG(2, "%s() control byte write read OK\n", __FUNCTION__);
- #endif
- }
-
- /* Set DTR, Set RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT2);
-
- /* Wait at least 10 ms */
- ret = msecs_to_jiffies(10);
- break;
-
- case IRDA_TASK_WAIT2:
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
-
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function ma600_reset (driver)
- *
- * This function resets the ma600 dongle. Warning, this function
- * must be called with a process context!!
- *
- * Algorithm:
- * 0. DTR=0, RTS=1 and wait 10 ms
- * 1. DTR=1, RTS=1 and wait 10 ms
- * 2. 9600 bps now
- */
-int ma600_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
-
- ASSERT(task != NULL, return -1;);
-
- if (self->reset_task && self->reset_task != task) {
- IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__);
- return msecs_to_jiffies(10);
- } else
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Clear DTR and Set RTS */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- ret = msecs_to_jiffies(10); /* Sleep 10 ms */
- break;
- case IRDA_TASK_WAIT1:
- /* Set DTR and RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(10); /* Sleep 10 ms */
- break;
- case IRDA_TASK_WAIT2:
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Leung <95Etwl@alumni.ee.ust.hk> http://www.engsvr.ust/~eetwl95");
-MODULE_DESCRIPTION("MA600 dongle driver version 0.1");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-11"); /* IRDA_MA600_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize MA600 module
- *
- */
-module_init(ma600_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup MA600 module
- *
- */
-module_exit(ma600_cleanup);
-
diff --git a/drivers/net/irda/mcp2120.c b/drivers/net/irda/mcp2120.c
deleted file mode 100644
index 5e6199eeef4..00000000000
--- a/drivers/net/irda/mcp2120.c
+++ /dev/null
@@ -1,240 +0,0 @@
-/*********************************************************************
- *
- *
- * Filename: mcp2120.c
- * Version: 1.0
- * Description: Implementation for the MCP2120 (Microchip)
- * Status: Experimental.
- * Author: Felix Tang (tangf@eyetap.org)
- * Created at: Sun Mar 31 19:32:12 EST 2002
- * Based on code by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 2002 Felix Tang, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static int mcp2120_reset(struct irda_task *task);
-static void mcp2120_open(dongle_t *self, struct qos_info *qos);
-static void mcp2120_close(dongle_t *self);
-static int mcp2120_change_speed(struct irda_task *task);
-
-#define MCP2120_9600 0x87
-#define MCP2120_19200 0x8B
-#define MCP2120_38400 0x85
-#define MCP2120_57600 0x83
-#define MCP2120_115200 0x81
-
-#define MCP2120_COMMIT 0x11
-
-static struct dongle_reg dongle = {
- .type = IRDA_MCP2120_DONGLE,
- .open = mcp2120_open,
- .close = mcp2120_close,
- .reset = mcp2120_reset,
- .change_speed = mcp2120_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init mcp2120_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit mcp2120_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void mcp2120_open(dongle_t *self, struct qos_info *qos)
-{
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x01;
-}
-
-static void mcp2120_close(dongle_t *self)
-{
- /* Power off dongle */
- /* reset and inhibit mcp2120 */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- //self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function mcp2120_change_speed (dev, speed)
- *
- * Set the speed for the MCP2120.
- *
- */
-static int mcp2120_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 control[2];
- int ret = 0;
-
- self->speed_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- /* Need to reset the dongle and go to 9600 bps before
- programming */
- //printk("Dmcp2120_change_speed irda_task_init\n");
- if (irda_task_execute(self, mcp2120_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- }
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Set DTR to enter command mode */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
- udelay(500);
-
- switch (speed) {
- case 9600:
- default:
- control[0] = MCP2120_9600;
- //printk("mcp2120 9600\n");
- break;
- case 19200:
- control[0] = MCP2120_19200;
- //printk("mcp2120 19200\n");
- break;
- case 34800:
- control[0] = MCP2120_38400;
- //printk("mcp2120 38400\n");
- break;
- case 57600:
- control[0] = MCP2120_57600;
- //printk("mcp2120 57600\n");
- break;
- case 115200:
- control[0] = MCP2120_115200;
- //printk("mcp2120 115200\n");
- break;
- }
- control[1] = MCP2120_COMMIT;
-
- /* Write control bytes */
- self->write(self->dev, control, 2);
-
- irda_task_next_state(task, IRDA_TASK_WAIT);
- ret = msecs_to_jiffies(100);
- //printk("mcp2120_change_speed irda_child_done\n");
- break;
- case IRDA_TASK_WAIT:
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- //printk("mcp2120_change_speed irda_task_wait\n");
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function mcp2120_reset (driver)
- *
- * This function resets the mcp2120 dongle.
- *
- * Info: -set RTS to reset mcp2120
- * -set DTR to set mcp2120 software command mode
- * -mcp2120 defaults to 9600 baud after reset
- *
- * Algorithm:
- * 0. Set RTS to reset mcp2120.
- * 1. Clear RTS and wait for device reset timer of 30 ms (max).
- *
- */
-
-
-static int mcp2120_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- int ret = 0;
-
- self->reset_task = task;
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- //printk("mcp2120_reset irda_task_init\n");
- /* Reset dongle by setting RTS*/
- self->set_dtr_rts(self->dev, TRUE, TRUE);
- irda_task_next_state(task, IRDA_TASK_WAIT1);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT1:
- //printk("mcp2120_reset irda_task_wait1\n");
- /* clear RTS and wait for at least 30 ms. */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
- irda_task_next_state(task, IRDA_TASK_WAIT2);
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT2:
- //printk("mcp2120_reset irda_task_wait2\n");
- /* Go back to normal mode */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Felix Tang <tangf@eyetap.org>");
-MODULE_DESCRIPTION("Microchip MCP2120");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-9"); /* IRDA_MCP2120_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize MCP2120 module
- *
- */
-module_init(mcp2120_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup MCP2120 module
- *
- */
-module_exit(mcp2120_cleanup);
diff --git a/drivers/net/irda/old_belkin.c b/drivers/net/irda/old_belkin.c
deleted file mode 100644
index 26f81fd2837..00000000000
--- a/drivers/net/irda/old_belkin.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*********************************************************************
- *
- * Filename: old_belkin.c
- * Version: 1.1
- * Description: Driver for the Belkin (old) SmartBeam dongle
- * Status: Experimental...
- * Author: Jean Tourrilhes <jt@hpl.hp.com>
- * Created at: 22/11/99
- * Modified at: Fri Dec 17 09:13:32 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1999 Jean Tourrilhes, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-/*
- * Belkin is selling a dongle called the SmartBeam.
- * In fact, there is two hardware version of this dongle, of course with
- * the same name and looking the exactly same (grrr...).
- * I guess that I've got the old one, because inside I don't have
- * a jumper for IrDA/ASK...
- *
- * As far as I can make it from info on their web site, the old dongle
- * support only 9600 b/s, which make our life much simpler as far as
- * the driver is concerned, but you might not like it very much ;-)
- * The new SmartBeam does 115 kb/s, and I've not tested it...
- *
- * Belkin claim that the correct driver for the old dongle (in Windows)
- * is the generic Parallax 9500a driver, but the Linux LiteLink driver
- * fails for me (probably because Linux-IrDA doesn't rate fallback),
- * so I created this really dumb driver...
- *
- * In fact, this driver doesn't do much. The only thing it does is to
- * prevent Linux-IrDA to use any other speed than 9600 b/s ;-) This
- * driver is called "old_belkin" so that when the new SmartBeam is supported
- * its driver can be called "belkin" instead of "new_belkin".
- *
- * Note : this driver was written without any info/help from Belkin,
- * so a lot of info here might be totally wrong. Blame me ;-)
- */
-
-/* Let's guess */
-#define MIN_DELAY 25 /* 15 us, but wait a little more to be sure */
-
-static void old_belkin_open(dongle_t *self, struct qos_info *qos);
-static void old_belkin_close(dongle_t *self);
-static int old_belkin_change_speed(struct irda_task *task);
-static int old_belkin_reset(struct irda_task *task);
-
-/* These are the baudrates supported */
-/* static __u32 baud_rates[] = { 9600 }; */
-
-static struct dongle_reg dongle = {
- .type = IRDA_OLD_BELKIN_DONGLE,
- .open = old_belkin_open,
- .close = old_belkin_close,
- .reset = old_belkin_reset,
- .change_speed = old_belkin_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init old_belkin_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit old_belkin_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void old_belkin_open(dongle_t *self, struct qos_info *qos)
-{
- /* Not too fast, please... */
- qos->baud_rate.bits &= IR_9600;
- /* Needs at least 10 ms (totally wild guess, can do probably better) */
- qos->min_turn_time.bits = 0x01;
-}
-
-static void old_belkin_close(dongle_t *self)
-{
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-}
-
-/*
- * Function old_belkin_change_speed (task)
- *
- * With only one speed available, not much to do...
- */
-static int old_belkin_change_speed(struct irda_task *task)
-{
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-/*
- * Function old_belkin_reset (task)
- *
- * Reset the Old-Belkin type dongle.
- *
- */
-static int old_belkin_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
-
- /* Power on dongle */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Sleep a minimum of 15 us */
- udelay(MIN_DELAY);
-
- /* This dongles speed "defaults" to 9600 bps ;-) */
- self->speed = 9600;
-
- irda_task_next_state(task, IRDA_TASK_DONE);
-
- return 0;
-}
-
-MODULE_AUTHOR("Jean Tourrilhes <jt@hpl.hp.com>");
-MODULE_DESCRIPTION("Belkin (old) SmartBeam dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-7"); /* IRDA_OLD_BELKIN_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize Old-Belkin module
- *
- */
-module_init(old_belkin_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Old-Belkin module
- *
- */
-module_exit(old_belkin_cleanup);
diff --git a/drivers/net/irda/tekram.c b/drivers/net/irda/tekram.c
deleted file mode 100644
index 9bfd2441adb..00000000000
--- a/drivers/net/irda/tekram.c
+++ /dev/null
@@ -1,282 +0,0 @@
-/*********************************************************************
- *
- * Filename: tekram.c
- * Version: 1.2
- * Description: Implementation of the Tekram IrMate IR-210B dongle
- * Status: Experimental.
- * Author: Dag Brattli <dagb@cs.uit.no>
- * Created at: Wed Oct 21 20:02:35 1998
- * Modified at: Fri Dec 17 09:13:09 1999
- * Modified by: Dag Brattli <dagb@cs.uit.no>
- *
- * Copyright (c) 1998-1999 Dag Brattli, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * Neither Dag Brattli nor University of Tromsø admit liability nor
- * provide warranty for any of this software. This material is
- * provided "AS-IS" and at no charge.
- *
- ********************************************************************/
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-
-#include <net/irda/irda.h>
-#include <net/irda/irda_device.h>
-
-static void tekram_open(dongle_t *self, struct qos_info *qos);
-static void tekram_close(dongle_t *self);
-static int tekram_change_speed(struct irda_task *task);
-static int tekram_reset(struct irda_task *task);
-
-#define TEKRAM_115200 0x00
-#define TEKRAM_57600 0x01
-#define TEKRAM_38400 0x02
-#define TEKRAM_19200 0x03
-#define TEKRAM_9600 0x04
-
-#define TEKRAM_PW 0x10 /* Pulse select bit */
-
-static struct dongle_reg dongle = {
- .type = IRDA_TEKRAM_DONGLE,
- .open = tekram_open,
- .close = tekram_close,
- .reset = tekram_reset,
- .change_speed = tekram_change_speed,
- .owner = THIS_MODULE,
-};
-
-static int __init tekram_init(void)
-{
- return irda_device_register_dongle(&dongle);
-}
-
-static void __exit tekram_cleanup(void)
-{
- irda_device_unregister_dongle(&dongle);
-}
-
-static void tekram_open(dongle_t *self, struct qos_info *qos)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- qos->baud_rate.bits &= IR_9600|IR_19200|IR_38400|IR_57600|IR_115200;
- qos->min_turn_time.bits = 0x01; /* Needs at least 10 ms */
- irda_qos_bits_to_value(qos);
-}
-
-static void tekram_close(dongle_t *self)
-{
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- /* Power off dongle */
- self->set_dtr_rts(self->dev, FALSE, FALSE);
-
- if (self->reset_task)
- irda_task_delete(self->reset_task);
- if (self->speed_task)
- irda_task_delete(self->speed_task);
-}
-
-/*
- * Function tekram_change_speed (dev, state, speed)
- *
- * Set the speed for the Tekram IRMate 210 type dongle. Warning, this
- * function must be called with a process context!
- *
- * Algorithm
- * 1. clear DTR
- * 2. set RTS, and wait at least 7 us
- * 3. send Control Byte to the IR-210 through TXD to set new baud rate
- * wait until the stop bit of Control Byte is sent (for 9600 baud rate,
- * it takes about 100 msec)
- * 5. clear RTS (return to NORMAL Operation)
- * 6. wait at least 50 us, new setting (baud rate, etc) takes effect here
- * after
- */
-static int tekram_change_speed(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- __u32 speed = (__u32) task->param;
- __u8 byte;
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- IRDA_ASSERT(task != NULL, return -1;);
-
- if (self->speed_task && self->speed_task != task) {
- IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
- return msecs_to_jiffies(10);
- } else
- self->speed_task = task;
-
- switch (speed) {
- default:
- case 9600:
- byte = TEKRAM_PW|TEKRAM_9600;
- break;
- case 19200:
- byte = TEKRAM_PW|TEKRAM_19200;
- break;
- case 38400:
- byte = TEKRAM_PW|TEKRAM_38400;
- break;
- case 57600:
- byte = TEKRAM_PW|TEKRAM_57600;
- break;
- case 115200:
- byte = TEKRAM_115200;
- break;
- }
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- case IRDA_TASK_CHILD_INIT:
- /*
- * Need to reset the dongle and go to 9600 bps before
- * programming
- */
- if (irda_task_execute(self, tekram_reset, NULL, task,
- (void *) speed))
- {
- /* Dongle need more time to reset */
- irda_task_next_state(task, IRDA_TASK_CHILD_WAIT);
-
- /* Give reset 1 sec to finish */
- ret = msecs_to_jiffies(1000);
- } else
- irda_task_next_state(task, IRDA_TASK_CHILD_DONE);
- break;
- case IRDA_TASK_CHILD_WAIT:
- IRDA_WARNING("%s(), resetting dongle timed out!\n",
- __FUNCTION__);
- ret = -1;
- break;
- case IRDA_TASK_CHILD_DONE:
- /* Set DTR, Clear RTS */
- self->set_dtr_rts(self->dev, TRUE, FALSE);
-
- /* Wait at least 7us */
- udelay(14);
-
- /* Write control byte */
- self->write(self->dev, &byte, 1);
-
- irda_task_next_state(task, IRDA_TASK_WAIT);
-
- /* Wait at least 100 ms */
- ret = msecs_to_jiffies(150);
- break;
- case IRDA_TASK_WAIT:
- /* Set DTR, Set RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->speed_task = NULL;
- ret = -1;
- break;
- }
- return ret;
-}
-
-/*
- * Function tekram_reset (driver)
- *
- * This function resets the tekram dongle. Warning, this function
- * must be called with a process context!!
- *
- * Algorithm:
- * 0. Clear RTS and DTR, and wait 50 ms (power off the IR-210 )
- * 1. clear RTS
- * 2. set DTR, and wait at least 1 ms
- * 3. clear DTR to SPACE state, wait at least 50 us for further
- * operation
- */
-int tekram_reset(struct irda_task *task)
-{
- dongle_t *self = (dongle_t *) task->instance;
- int ret = 0;
-
- IRDA_DEBUG(2, "%s()\n", __FUNCTION__ );
-
- IRDA_ASSERT(task != NULL, return -1;);
-
- if (self->reset_task && self->reset_task != task) {
- IRDA_DEBUG(0, "%s(), busy!\n", __FUNCTION__ );
- return msecs_to_jiffies(10);
- } else
- self->reset_task = task;
-
- /* Power off dongle */
- //self->set_dtr_rts(self->dev, FALSE, FALSE);
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- switch (task->state) {
- case IRDA_TASK_INIT:
- irda_task_next_state(task, IRDA_TASK_WAIT1);
-
- /* Sleep 50 ms */
- ret = msecs_to_jiffies(50);
- break;
- case IRDA_TASK_WAIT1:
- /* Clear DTR, Set RTS */
- self->set_dtr_rts(self->dev, FALSE, TRUE);
-
- irda_task_next_state(task, IRDA_TASK_WAIT2);
-
- /* Should sleep 1 ms */
- ret = msecs_to_jiffies(1);
- break;
- case IRDA_TASK_WAIT2:
- /* Set DTR, Set RTS */
- self->set_dtr_rts(self->dev, TRUE, TRUE);
-
- /* Wait at least 50 us */
- udelay(75);
-
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- break;
- default:
- IRDA_ERROR("%s(), unknown state %d\n",
- __FUNCTION__, task->state);
- irda_task_next_state(task, IRDA_TASK_DONE);
- self->reset_task = NULL;
- ret = -1;
- }
- return ret;
-}
-
-MODULE_AUTHOR("Dag Brattli <dagb@cs.uit.no>");
-MODULE_DESCRIPTION("Tekram IrMate IR-210B dongle driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("irda-dongle-0"); /* IRDA_TEKRAM_DONGLE */
-
-/*
- * Function init_module (void)
- *
- * Initialize Tekram module
- *
- */
-module_init(tekram_init);
-
-/*
- * Function cleanup_module (void)
- *
- * Cleanup Tekram module
- *
- */
-module_exit(tekram_cleanup);
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-01 20:26:47 +0000