summaryrefslogtreecommitdiffstats
path: root/drivers/net/isa-skeleton.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/isa-skeleton.c')
-rw-r--r--drivers/net/isa-skeleton.c718
1 files changed, 0 insertions, 718 deletions
diff --git a/drivers/net/isa-skeleton.c b/drivers/net/isa-skeleton.c
deleted file mode 100644
index 04d0502726c..00000000000
--- a/drivers/net/isa-skeleton.c
+++ /dev/null
@@ -1,718 +0,0 @@
-/* isa-skeleton.c: A network driver outline for linux.
- *
- * Written 1993-94 by Donald Becker.
- *
- * Copyright 1993 United States Government as represented by the
- * Director, National Security Agency.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by reference.
- *
- * The author may be reached as becker@scyld.com, or C/O
- * Scyld Computing Corporation
- * 410 Severn Ave., Suite 210
- * Annapolis MD 21403
- *
- * This file is an outline for writing a network device driver for the
- * the Linux operating system.
- *
- * To write (or understand) a driver, have a look at the "loopback.c" file to
- * get a feel of what is going on, and then use the code below as a skeleton
- * for the new driver.
- *
- */
-
-static const char *version =
- "isa-skeleton.c:v1.51 9/24/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
-
-/*
- * Sources:
- * List your sources of programming information to document that
- * the driver is your own creation, and give due credit to others
- * that contributed to the work. Remember that GNU project code
- * cannot use proprietary or trade secret information. Interface
- * definitions are generally considered non-copyrightable to the
- * extent that the same names and structures must be used to be
- * compatible.
- *
- * Finally, keep in mind that the Linux kernel is has an API, not
- * ABI. Proprietary object-code-only distributions are not permitted
- * under the GPL.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/spinlock.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-/*
- * The name of the card. Is used for messages and in the requests for
- * io regions, irqs and dma channels
- */
-static const char* cardname = "netcard";
-
-/* First, a few definitions that the brave might change. */
-
-/* A zero-terminated list of I/O addresses to be probed. */
-static unsigned int netcard_portlist[] __initdata =
- { 0x200, 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0};
-
-/* use 0 for production, 1 for verification, >2 for debug */
-#ifndef NET_DEBUG
-#define NET_DEBUG 2
-#endif
-static unsigned int net_debug = NET_DEBUG;
-
-/* The number of low I/O ports used by the ethercard. */
-#define NETCARD_IO_EXTENT 32
-
-#define MY_TX_TIMEOUT ((400*HZ)/1000)
-
-/* Information that need to be kept for each board. */
-struct net_local {
- struct net_device_stats stats;
- long open_time; /* Useless example local info. */
-
- /* Tx control lock. This protects the transmit buffer ring
- * state along with the "tx full" state of the driver. This
- * means all netif_queue flow control actions are protected
- * by this lock as well.
- */
- spinlock_t lock;
-};
-
-/* The station (ethernet) address prefix, used for IDing the board. */
-#define SA_ADDR0 0x00
-#define SA_ADDR1 0x42
-#define SA_ADDR2 0x65
-
-/* Index to functions, as function prototypes. */
-
-static int netcard_probe1(struct net_device *dev, int ioaddr);
-static int net_open(struct net_device *dev);
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
-static irqreturn_t net_interrupt(int irq, void *dev_id);
-static void net_rx(struct net_device *dev);
-static int net_close(struct net_device *dev);
-static struct net_device_stats *net_get_stats(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static void net_tx_timeout(struct net_device *dev);
-
-
-/* Example routines you must write ;->. */
-#define tx_done(dev) 1
-static void hardware_send_packet(short ioaddr, char *buf, int length);
-static void chipset_init(struct net_device *dev, int startp);
-
-/*
- * Check for a network adaptor of this type, and return '0' iff one exists.
- * If dev->base_addr == 0, probe all likely locations.
- * If dev->base_addr == 1, always return failure.
- * If dev->base_addr == 2, allocate space for the device and return success
- * (detachable devices only).
- */
-static int __init do_netcard_probe(struct net_device *dev)
-{
- int i;
- int base_addr = dev->base_addr;
- int irq = dev->irq;
-
- if (base_addr > 0x1ff) /* Check a single specified location. */
- return netcard_probe1(dev, base_addr);
- else if (base_addr != 0) /* Don't probe at all. */
- return -ENXIO;
-
- for (i = 0; netcard_portlist[i]; i++) {
- int ioaddr = netcard_portlist[i];
- if (netcard_probe1(dev, ioaddr) == 0)
- return 0;
- dev->irq = irq;
- }
-
- return -ENODEV;
-}
-
-static void cleanup_card(struct net_device *dev)
-{
-#ifdef jumpered_dma
- free_dma(dev->dma);
-#endif
-#ifdef jumpered_interrupts
- free_irq(dev->irq, dev);
-#endif
- release_region(dev->base_addr, NETCARD_IO_EXTENT);
-}
-
-#ifndef MODULE
-struct net_device * __init netcard_probe(int unit)
-{
- struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
- int err;
-
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
-
- err = do_netcard_probe(dev);
- if (err)
- goto out;
- return dev;
-out:
- free_netdev(dev);
- return ERR_PTR(err);
-}
-#endif
-
-static const struct net_device_ops netcard_netdev_ops = {
- .ndo_open = net_open,
- .ndo_stop = net_close,
- .ndo_start_xmit = net_send_packet,
- .ndo_get_stats = net_get_stats,
- .ndo_set_multicast_list = set_multicast_list,
- .ndo_tx_timeout = net_tx_timeout,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_change_mtu = eth_change_mtu,
-};
-
-/*
- * This is the real probe routine. Linux has a history of friendly device
- * probes on the ISA bus. A good device probes avoids doing writes, and
- * verifies that the correct device exists and functions.
- */
-static int __init netcard_probe1(struct net_device *dev, int ioaddr)
-{
- struct net_local *np;
- static unsigned version_printed;
- int i;
- int err = -ENODEV;
-
- /* Grab the region so that no one else tries to probe our ioports. */
- if (!request_region(ioaddr, NETCARD_IO_EXTENT, cardname))
- return -EBUSY;
-
- /*
- * For ethernet adaptors the first three octets of the station address
- * contains the manufacturer's unique code. That might be a good probe
- * method. Ideally you would add additional checks.
- */
- if (inb(ioaddr + 0) != SA_ADDR0 ||
- inb(ioaddr + 1) != SA_ADDR1 ||
- inb(ioaddr + 2) != SA_ADDR2)
- goto out;
-
- if (net_debug && version_printed++ == 0)
- printk(KERN_DEBUG "%s", version);
-
- printk(KERN_INFO "%s: %s found at %#3x, ", dev->name, cardname, ioaddr);
-
- /* Fill in the 'dev' fields. */
- dev->base_addr = ioaddr;
-
- /* Retrieve and print the ethernet address. */
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = inb(ioaddr + i);
-
- printk("%pM", dev->dev_addr);
-
- err = -EAGAIN;
-#ifdef jumpered_interrupts
- /*
- * If this board has jumpered interrupts, allocate the interrupt
- * vector now. There is no point in waiting since no other device
- * can use the interrupt, and this marks the irq as busy. Jumpered
- * interrupts are typically not reported by the boards, and we must
- * used autoIRQ to find them.
- */
-
- if (dev->irq == -1)
- ; /* Do nothing: a user-level program will set it. */
- else if (dev->irq < 2) { /* "Auto-IRQ" */
- unsigned long irq_mask = probe_irq_on();
- /* Trigger an interrupt here. */
-
- dev->irq = probe_irq_off(irq_mask);
- if (net_debug >= 2)
- printk(" autoirq is %d", dev->irq);
- } else if (dev->irq == 2)
- /*
- * Fixup for users that don't know that IRQ 2 is really
- * IRQ9, or don't know which one to set.
- */
- dev->irq = 9;
-
- {
- int irqval = request_irq(dev->irq, net_interrupt, 0, cardname, dev);
- if (irqval) {
- printk("%s: unable to get IRQ %d (irqval=%d).\n",
- dev->name, dev->irq, irqval);
- goto out;
- }
- }
-#endif /* jumpered interrupt */
-#ifdef jumpered_dma
- /*
- * If we use a jumpered DMA channel, that should be probed for and
- * allocated here as well. See lance.c for an example.
- */
- if (dev->dma == 0) {
- if (request_dma(dev->dma, cardname)) {
- printk("DMA %d allocation failed.\n", dev->dma);
- goto out1;
- } else
- printk(", assigned DMA %d.\n", dev->dma);
- } else {
- short dma_status, new_dma_status;
-
- /* Read the DMA channel status registers. */
- dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
- (inb(DMA2_STAT_REG) & 0xf0);
- /* Trigger a DMA request, perhaps pause a bit. */
- outw(0x1234, ioaddr + 8);
- /* Re-read the DMA status registers. */
- new_dma_status = ((inb(DMA1_STAT_REG) >> 4) & 0x0f) |
- (inb(DMA2_STAT_REG) & 0xf0);
- /*
- * Eliminate the old and floating requests,
- * and DMA4 the cascade.
- */
- new_dma_status ^= dma_status;
- new_dma_status &= ~0x10;
- for (i = 7; i > 0; i--)
- if (test_bit(i, &new_dma_status)) {
- dev->dma = i;
- break;
- }
- if (i <= 0) {
- printk("DMA probe failed.\n");
- goto out1;
- }
- if (request_dma(dev->dma, cardname)) {
- printk("probed DMA %d allocation failed.\n", dev->dma);
- goto out1;
- }
- }
-#endif /* jumpered DMA */
-
- np = netdev_priv(dev);
- spin_lock_init(&np->lock);
-
- dev->netdev_ops = &netcard_netdev_ops;
- dev->watchdog_timeo = MY_TX_TIMEOUT;
-
- err = register_netdev(dev);
- if (err)
- goto out2;
- return 0;
-out2:
-#ifdef jumpered_dma
- free_dma(dev->dma);
-#endif
-out1:
-#ifdef jumpered_interrupts
- free_irq(dev->irq, dev);
-#endif
-out:
- release_region(base_addr, NETCARD_IO_EXTENT);
- return err;
-}
-
-static void net_tx_timeout(struct net_device *dev)
-{
- struct net_local *np = netdev_priv(dev);
-
- printk(KERN_WARNING "%s: transmit timed out, %s?\n", dev->name,
- tx_done(dev) ? "IRQ conflict" : "network cable problem");
-
- /* Try to restart the adaptor. */
- chipset_init(dev, 1);
-
- np->stats.tx_errors++;
-
- /* If we have space available to accept new transmit
- * requests, wake up the queueing layer. This would
- * be the case if the chipset_init() call above just
- * flushes out the tx queue and empties it.
- *
- * If instead, the tx queue is retained then the
- * netif_wake_queue() call should be placed in the
- * TX completion interrupt handler of the driver instead
- * of here.
- */
- if (!tx_full(dev))
- netif_wake_queue(dev);
-}
-
-/*
- * Open/initialize the board. This is called (in the current kernel)
- * sometime after booting when the 'ifconfig' program is run.
- *
- * This routine should set everything up anew at each open, even
- * registers that "should" only need to be set once at boot, so that
- * there is non-reboot way to recover if something goes wrong.
- */
-static int
-net_open(struct net_device *dev)
-{
- struct net_local *np = netdev_priv(dev);
- int ioaddr = dev->base_addr;
- /*
- * This is used if the interrupt line can turned off (shared).
- * See 3c503.c for an example of selecting the IRQ at config-time.
- */
- if (request_irq(dev->irq, net_interrupt, 0, cardname, dev)) {
- return -EAGAIN;
- }
- /*
- * Always allocate the DMA channel after the IRQ,
- * and clean up on failure.
- */
- if (request_dma(dev->dma, cardname)) {
- free_irq(dev->irq, dev);
- return -EAGAIN;
- }
-
- /* Reset the hardware here. Don't forget to set the station address. */
- chipset_init(dev, 1);
- outb(0x00, ioaddr);
- np->open_time = jiffies;
-
- /* We are now ready to accept transmit requeusts from
- * the queueing layer of the networking.
- */
- netif_start_queue(dev);
-
- return 0;
-}
-
-/* This will only be invoked if your driver is _not_ in XOFF state.
- * What this means is that you need not check it, and that this
- * invariant will hold if you make sure that the netif_*_queue()
- * calls are done at the proper times.
- */
-static int net_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct net_local *np = netdev_priv(dev);
- int ioaddr = dev->base_addr;
- short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
- unsigned char *buf = skb->data;
-
- /* If some error occurs while trying to transmit this
- * packet, you should return '1' from this function.
- * In such a case you _may not_ do anything to the
- * SKB, it is still owned by the network queueing
- * layer when an error is returned. This means you
- * may not modify any SKB fields, you may not free
- * the SKB, etc.
- */
-
-#if TX_RING
- /* This is the most common case for modern hardware.
- * The spinlock protects this code from the TX complete
- * hardware interrupt handler. Queue flow control is
- * thus managed under this lock as well.
- */
- unsigned long flags;
- spin_lock_irqsave(&np->lock, flags);
-
- add_to_tx_ring(np, skb, length);
- dev->trans_start = jiffies;
-
- /* If we just used up the very last entry in the
- * TX ring on this device, tell the queueing
- * layer to send no more.
- */
- if (tx_full(dev))
- netif_stop_queue(dev);
-
- /* When the TX completion hw interrupt arrives, this
- * is when the transmit statistics are updated.
- */
-
- spin_unlock_irqrestore(&np->lock, flags);
-#else
- /* This is the case for older hardware which takes
- * a single transmit buffer at a time, and it is
- * just written to the device via PIO.
- *
- * No spin locking is needed since there is no TX complete
- * event. If by chance your card does have a TX complete
- * hardware IRQ then you may need to utilize np->lock here.
- */
- hardware_send_packet(ioaddr, buf, length);
- np->stats.tx_bytes += skb->len;
-
- dev->trans_start = jiffies;
-
- /* You might need to clean up and record Tx statistics here. */
- if (inw(ioaddr) == /*RU*/81)
- np->stats.tx_aborted_errors++;
- dev_kfree_skb (skb);
-#endif
-
- return NETDEV_TX_OK;
-}
-
-#if TX_RING
-/* This handles TX complete events posted by the device
- * via interrupts.
- */
-void net_tx(struct net_device *dev)
-{
- struct net_local *np = netdev_priv(dev);
- int entry;
-
- /* This protects us from concurrent execution of
- * our dev->hard_start_xmit function above.
- */
- spin_lock(&np->lock);
-
- entry = np->tx_old;
- while (tx_entry_is_sent(np, entry)) {
- struct sk_buff *skb = np->skbs[entry];
-
- np->stats.tx_bytes += skb->len;
- dev_kfree_skb_irq (skb);
-
- entry = next_tx_entry(np, entry);
- }
- np->tx_old = entry;
-
- /* If we had stopped the queue due to a "tx full"
- * condition, and space has now been made available,
- * wake up the queue.
- */
- if (netif_queue_stopped(dev) && ! tx_full(dev))
- netif_wake_queue(dev);
-
- spin_unlock(&np->lock);
-}
-#endif
-
-/*
- * The typical workload of the driver:
- * Handle the network interface interrupts.
- */
-static irqreturn_t net_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = dev_id;
- struct net_local *np;
- int ioaddr, status;
- int handled = 0;
-
- ioaddr = dev->base_addr;
-
- np = netdev_priv(dev);
- status = inw(ioaddr + 0);
-
- if (status == 0)
- goto out;
- handled = 1;
-
- if (status & RX_INTR) {
- /* Got a packet(s). */
- net_rx(dev);
- }
-#if TX_RING
- if (status & TX_INTR) {
- /* Transmit complete. */
- net_tx(dev);
- np->stats.tx_packets++;
- netif_wake_queue(dev);
- }
-#endif
- if (status & COUNTERS_INTR) {
- /* Increment the appropriate 'localstats' field. */
- np->stats.tx_window_errors++;
- }
-out:
- return IRQ_RETVAL(handled);
-}
-
-/* We have a good packet(s), get it/them out of the buffers. */
-static void
-net_rx(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
- int boguscount = 10;
-
- do {
- int status = inw(ioaddr);
- int pkt_len = inw(ioaddr);
-
- if (pkt_len == 0) /* Read all the frames? */
- break; /* Done for now */
-
- if (status & 0x40) { /* There was an error. */
- lp->stats.rx_errors++;
- if (status & 0x20) lp->stats.rx_frame_errors++;
- if (status & 0x10) lp->stats.rx_over_errors++;
- if (status & 0x08) lp->stats.rx_crc_errors++;
- if (status & 0x04) lp->stats.rx_fifo_errors++;
- } else {
- /* Malloc up new buffer. */
- struct sk_buff *skb;
-
- lp->stats.rx_bytes+=pkt_len;
-
- skb = dev_alloc_skb(pkt_len);
- if (skb == NULL) {
- printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
- dev->name);
- lp->stats.rx_dropped++;
- break;
- }
- skb->dev = dev;
-
- /* 'skb->data' points to the start of sk_buff data area. */
- memcpy(skb_put(skb,pkt_len), (void*)dev->rmem_start,
- pkt_len);
- /* or */
- insw(ioaddr, skb->data, (pkt_len + 1) >> 1);
-
- netif_rx(skb);
- lp->stats.rx_packets++;
- lp->stats.rx_bytes += pkt_len;
- }
- } while (--boguscount);
-
- return;
-}
-
-/* The inverse routine to net_open(). */
-static int
-net_close(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- int ioaddr = dev->base_addr;
-
- lp->open_time = 0;
-
- netif_stop_queue(dev);
-
- /* Flush the Tx and disable Rx here. */
-
- disable_dma(dev->dma);
-
- /* If not IRQ or DMA jumpered, free up the line. */
- outw(0x00, ioaddr+0); /* Release the physical interrupt line. */
-
- free_irq(dev->irq, dev);
- free_dma(dev->dma);
-
- /* Update the statistics here. */
-
- return 0;
-
-}
-
-/*
- * Get the current statistics.
- * This may be called with the card open or closed.
- */
-static struct net_device_stats *net_get_stats(struct net_device *dev)
-{
- struct net_local *lp = netdev_priv(dev);
- short ioaddr = dev->base_addr;
-
- /* Update the statistics from the device registers. */
- lp->stats.rx_missed_errors = inw(ioaddr+1);
- return &lp->stats;
-}
-
-/*
- * Set or clear the multicast filter for this adaptor.
- * num_addrs == -1 Promiscuous mode, receive all packets
- * num_addrs == 0 Normal mode, clear multicast list
- * num_addrs > 0 Multicast mode, receive normal and MC packets,
- * and do best-effort filtering.
- */
-static void
-set_multicast_list(struct net_device *dev)
-{
- short ioaddr = dev->base_addr;
- if (dev->flags&IFF_PROMISC)
- {
- /* Enable promiscuous mode */
- outw(MULTICAST|PROMISC, ioaddr);
- }
- else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > HW_MAX_ADDRS)
- {
- /* Disable promiscuous mode, use normal mode. */
- hardware_set_filter(NULL);
-
- outw(MULTICAST, ioaddr);
- }
- else if(dev->mc_count)
- {
- /* Walk the address list, and load the filter */
- hardware_set_filter(dev->mc_list);
-
- outw(MULTICAST, ioaddr);
- }
- else
- outw(0, ioaddr);
-}
-
-#ifdef MODULE
-
-static struct net_device *this_device;
-static int io = 0x300;
-static int irq;
-static int dma;
-static int mem;
-MODULE_LICENSE("GPL");
-
-int init_module(void)
-{
- struct net_device *dev;
- int result;
-
- if (io == 0)
- printk(KERN_WARNING "%s: You shouldn't use auto-probing with insmod!\n",
- cardname);
- dev = alloc_etherdev(sizeof(struct net_local));
- if (!dev)
- return -ENOMEM;
-
- /* Copy the parameters from insmod into the device structure. */
- dev->base_addr = io;
- dev->irq = irq;
- dev->dma = dma;
- dev->mem_start = mem;
- if (do_netcard_probe(dev) == 0) {
- this_device = dev;
- return 0;
- }
- free_netdev(dev);
- return -ENXIO;
-}
-
-void
-cleanup_module(void)
-{
- unregister_netdev(this_device);
- cleanup_card(this_device);
- free_netdev(this_device);
-}
-
-#endif /* MODULE */