diff options
Diffstat (limited to 'drivers/net/ixgbe/ixgbe_main.c')
| -rw-r--r-- | drivers/net/ixgbe/ixgbe_main.c | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 9551cbb7bf0..d571d101de0 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -108,6 +108,8 @@ static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = { board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM), + board_82599 }, {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), board_82599 }, @@ -1618,6 +1620,48 @@ static void ixgbe_set_itr_msix(struct ixgbe_q_vector *q_vector) } } +/** + * ixgbe_check_overtemp_task - worker thread to check over tempurature + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_check_overtemp_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, + struct ixgbe_adapter, + check_overtemp_task); + struct ixgbe_hw *hw = &adapter->hw; + u32 eicr = adapter->interrupt_event; + + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_T3_LOM: { + u32 autoneg; + bool link_up = false; + + if (hw->mac.ops.check_link) + hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + + if (((eicr & IXGBE_EICR_GPI_SDP0) && (!link_up)) || + (eicr & IXGBE_EICR_LSC)) + /* Check if this is due to overtemp */ + if (hw->phy.ops.check_overtemp(hw) == IXGBE_ERR_OVERTEMP) + break; + } + return; + default: + if (!(eicr & IXGBE_EICR_GPI_SDP0)) + return; + break; + } + DPRINTK(DRV, ERR, "Network adapter has been stopped because it " + "has over heated. Restart the computer. If the problem " + "persists, power off the system and replace the " + "adapter\n"); + /* write to clear the interrupt */ + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0); + } +} + static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) { struct ixgbe_hw *hw = &adapter->hw; @@ -1689,6 +1733,10 @@ static irqreturn_t ixgbe_msix_lsc(int irq, void *data) if (hw->mac.type == ixgbe_mac_82599EB) { ixgbe_check_sfp_event(adapter, eicr); + adapter->interrupt_event = eicr; + if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && + ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) + schedule_work(&adapter->check_overtemp_task); /* Handle Flow Director Full threshold interrupt */ if (eicr & IXGBE_EICR_FLOW_DIR) { @@ -2190,6 +2238,8 @@ static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter) u32 mask; mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE); + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) + mask |= IXGBE_EIMS_GPI_SDP0; if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) mask |= IXGBE_EIMS_GPI_SDP1; if (adapter->hw.mac.type == ixgbe_mac_82599EB) { @@ -2250,6 +2300,9 @@ static irqreturn_t ixgbe_intr(int irq, void *data) ixgbe_check_sfp_event(adapter, eicr); ixgbe_check_fan_failure(adapter, eicr); + if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && + ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) + schedule_work(&adapter->check_overtemp_task); if (napi_schedule_prep(&(q_vector->napi))) { adapter->tx_ring[0]->total_packets = 0; @@ -3265,6 +3318,13 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); } + /* Enable Thermal over heat sensor interrupt */ + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { + gpie = IXGBE_READ_REG(hw, IXGBE_GPIE); + gpie |= IXGBE_SDP0_GPIEN; + IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); + } + /* Enable fan failure interrupt if media type is copper */ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { gpie = IXGBE_READ_REG(hw, IXGBE_GPIE); @@ -3666,6 +3726,9 @@ void ixgbe_down(struct ixgbe_adapter *adapter) adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) cancel_work_sync(&adapter->fdir_reinit_task); + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) + cancel_work_sync(&adapter->check_overtemp_task); + /* disable transmits in the hardware now that interrupts are off */ for (i = 0; i < adapter->num_tx_queues; i++) { j = adapter->tx_ring[i]->reg_idx; @@ -4645,6 +4708,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599; adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; if (dev->features & NETIF_F_NTUPLE) { /* Flow Director perfect filter enabled */ adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE; @@ -6561,7 +6626,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, } /* reset_hw fills in the perm_addr as well */ + hw->phy.reset_if_overtemp = true; err = hw->mac.ops.reset_hw(hw); + hw->phy.reset_if_overtemp = false; if (err == IXGBE_ERR_SFP_NOT_PRESENT && hw->mac.type == ixgbe_mac_82598EB) { /* @@ -6730,6 +6797,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) INIT_WORK(&adapter->fdir_reinit_task, ixgbe_fdir_reinit_task); + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) + INIT_WORK(&adapter->check_overtemp_task, ixgbe_check_overtemp_task); #ifdef CONFIG_IXGBE_DCA if (dca_add_requester(&pdev->dev) == 0) { adapter->flags |= IXGBE_FLAG_DCA_ENABLED; |